earnest vigil
I got this keyboard in the mail today, and straight out of the box it worked fine, tried typing on it, and every thing was okay. I went to update the firmware and noticed that the typing was a lil lagged and wasnt as accurate. Everything is set to default. If i even try to press to rapid fire mode it goes absolutely nuts and presses all sorts of random buttons.
I tried to factory reset it and the problem sill persist.
I tried using my KeyChron Cable and the problem still persist. I've used the wooting cable and it was fine.
Rebooted my computer and the keyboard stop working all together, i had to plug my keychron in and then once windows booted, i was able to plug my wooting back in and it started working again.
I tried going to the wootility web and i notice that my keys are constantly actuated at .64 or .78 all the time.
Its never at zero.
Keyboard has less then 3 hours of use on it, and most of that use is just tinkering with it to make it act right. Put my Keychron keyboard back in for now until i can either figure this out or return the wooting.
I've never had this issue with a brand new keyboard before.
TLDR
Keys pressing randomly, and actuation is constantly at .64 or higher.
Tried using different cables, no luck
Tried factory reset, no luck
tachyon mode is not on
brightness is at 50%
turned the RGB off still has the same problem
Rapid fire mode is unusable, it presses so many random keys at once.
also tried usb 2.0, sub 3.0, and USB-C with my keychron cord.
upbeat spear