maiden marsh
Scenario:
Fully press A
Fully press D
Let go of A
What happens:
AAAAAAAAAAAAAADAAAAAAAAAAAAA
only one entry of D is registered while no entry of D is registered on release of A
What should happen:
AAAAAAAAAADADADADADADADDDDDDDDDDDD
only A should be registered until D is pressed, both should be registered until A is released, then D should only be registered.
Hardware: Wooting 2HE ARM
Firmware: v2.9.1-beta.0
Wootility: v4.7.1-beta
Profile: 54052e51d7d0f5be1de2bffe82febb3e949a
PS: im sorry if i posted in the wrong place, im unsure where the correct place should be
languid path
**Scenario:**
Fully press A
Fully press D
Let go of A
**What happens:**
AAAAAAA...
If you’re getting this info from the input tester in wootility, it showed incorrect inputs when I tested all SOCD resolutions. Check in game or a different input tester online if you haven’t already.
In Wootility it’s just visual.
maiden marsh
If you’re getting this info from the input tester in wootility, it showed incorr...
no, im basing it off games
languid path
Alright 💯
unreal dock
OMG i thought i was crazy, all the games i played got the same problem and i freaked out. Later i realized it has something to do with the new 2.9.1 beta firmware. When i switched back to 2.7.2 everything is fine. I play mostly FPS : OW2, CS2, VLR, APEX and the new firmware keeps making me strafe left (button A) randomly for 2 seconds, it's like input lag. I couldnt find any post about it on google/reddit so i went here and found you have the same thing too. All the keyboard input tester showed nothing like button A is stucking or holding down, i even crashed out and cleaned my keyboard for 2 hours straight just to ran into the same problem again later.
Thanks for posting your problem man.
I use 60HE btw.
Further info : i didnt even press A or D, just W when the round starts, and sometimes it automatically strafe to the left, not all the time, but it happens randomly. I know it sounds crazy, but nothing happen in version 2.7.2.
tulip vapor
OMG i thought i was crazy, all the games i played got the same problem and i fre...
The issue being discussed in this thread is about SCOD, it sounds like you're just talking about normal input stuff? If you're on 0.1mm actuation, I'd suggest increasing it and seeing if you still have the same symptoms
To OP, I'll have a closer look into this later
unreal dock
The issue being discussed in this thread is about SCOD, it sounds like you're ju...
Sorry for that, i did make another comment on the game support thread after i found this post. I do have SOCD on and getting somewhat kinda the same problem too, i was worried and didnt notice about the thread, im so sorry.
tulip vapor
Sorry for that, i did make another comment on the game support thread after i fo...
No worries
If you can make your own thread and @ me that would be the best 🙂
unreal dock
On it, sir !
jagged marlin
Well… I had the same problem with the beta with socd.
After install I felt a lot of input lag in the movement and the aim… cant explain but was impossible to play cs2.
I reset and revert to the last stable not beta.. and my movement is fine again.
Not sure whats the problem but the beta version make my movement/ aim bad.
tulip vapor
Well… I had the same problem with the beta with socd.
After install I felt a lot...
Did you have that issue on the beta firmware just with regular inputs and not using SCOD or Rappy Snappy? In terms of general input handling, nothing has changed between the stable and beta
jagged marlin
Did you have that issue on the beta firmware just with regular inputs and not us...
yes. I m not using SOCD or RP only tested...
this user had the same issue I believe
tulip vapor
Could you open a thread for your issue @jagged marlin so this thread stays on-topic
@ me in it
jagged marlin
on #1141096226884956181 ?
tulip vapor
#1019755933959733258 would prob be the most applicable