vernal flume
hey guys, i might have spilled some sugary substance (;D) called vitamin well on my keyboard. just a tiny bit. now some buttons feel kinda sticky and a bit stiff. i opened up my keyboard the first time and it just doesnt feel good anymore.
i bought new PCB keycaps, new plating, new swithces (magnetic jade), new aluminium case and some lube. will replacing these things fix my wooting 60he?
weary galleonBOT
hey guys, i might have spilled some sugary substance (;D) called vitamin well on...
Thanks for posting your support request!
Note: #community_support is only for answering general questions and for troubleshooting.
All order-specific and shipment-specific support must be handled via the Wooting Hub or via email to social@wooting.io
(You need to create an account on the Wooting Hub, using the same email address as your purchase. The account is not created for you automatically!)
Troubleshooting your Wooting Keyboard? Try these steps first!
Basic Troubleshooting
Questions about shipping, or what to do if your shipment has a problem?
Possible Problems During Shipping (with Solutions)
Looking for information about your specific order?
You can find that on the Wooting Hub! There you can also add upgrades, update your shipping address, and much more.
Is your order about to ship and you need to pause it for any reason?
Place it on hold via the Wooting Hub!
Do you need to...
All of these types of requests need to be made via the Wooting Hub or by emailing social@wooting.io directly!
vernal flume
it will be my first every "modding" of a keyboard
but i dont know in specific if this will fix anything cause i dont find anything about it online
ashen dagger
as you bought all the parts for a new keyboard not sure what will be left of the old one or if you even need to use it ?
vernal flume
and would it help to clean the PCB itself? not sure if it causes any stickyness (with isopropyl alcohol?)
ashen dagger
ill give my guide on the cleaning part one seconed
Unplug:
First thing regarding liquid spills is to make sure the keyboard is unplugged and unpowered to prevent possible damage.
Disassembly:
Perform a complete disassembly and separate the layers.
A video guide on how to Disassemble the keyboard.
Wiping Off:
Go over the Case ,Foam, PCBA, etc. with a paper towel and Dab or wipe off any excess liquid until it is as dry as possible.
Inspect:
I'll note that while the PCBA is coated with a light water resistance coating, it does not fully coat the PCBA, and it is advised that you thoroughly inspect the non-coated areas (USB C port area & programmer pins under the spacebar) for any residue or liquid
(image of areas for references).
Clean:
If you notice anything that looks off or requires cleaning, I would recommend you use 70% IPA Or above (IsoPropyl Alcohol) with a soft brush or Q-Tip to clean the area. This is highly recommended if liquid is not water but a sugary drink or other, as it may leave residue when it dry's that could help corrode and exhibit problems at a later time if not cleaned.
Drying:
Leave the separate layers out to dry for half a day in a dry room. If it feels wet to the touch, leave it to dry for longer.
Reassembly & Test:
Reassemble the keyboard and plug it back in to see if it is working. If it shows any issues such as turning off/on repeatedly, it's best to unplug the keyboard and perform the Inspection & cleaning steps again.
Notes:
If you are unsure of anything or want a second pair of eyes, give me a ping. I'll help out when I can.
If "IPA" is not an option for you, then preferably you can use deionized water, or distilled water. While tap water can be used, I would not recommend the use of it.
