double click on all keys but particulary on space bar

[zinc elm]

I switch game today with spam key gameplay and i discover majority of keys and my space bar double click.i use a internet browser click tester and my space bar double click a lot.
1.tachyon on or off no difference
2.brightness to zero no difference
3.different usb cable and usb port no difference
4.different computer no difference
5.try all actuation points no difference
6.firmware and wootility up to date (beta build) i roll back to 2.7.1 test signal build no difference
7.replacement switch no difference
8.all rapid trigger range tested no difference but double click reduced a little at 2.35mm rapid trigger 9. happen straight away before deep calibration and after deep calibration (no difference) double click reduced a little but still a lot here when rapid trigger is off on 2.7.3 build.only old build like2.7.2 or older stop double click issue no matter the settings.

[elder eagle]

Thanks for posting your support request!

Please note, the support center is only for community-based support with technical troubleshooting and general questions.

For official Wooting Customer Support, please use the Contact Us button on the Wooting Hub or email your request to [e-mail]
note: use the email address associated with your order for fastest resolution

Looking for information about your specific order?
You can find that on the Wooting Hub! There you can also add upgrades, change/confirm your shipping address, and much more.

Is your order about to ship and you need to pause it for any reason?
Place it On Hold via the Wooting Hub!
https://hub.wooting.io

[astral bough]

Is Rapid trigger on or off?

[zinc elm]

on

[astral bough]

What is the actuation like? .1mm?

[zinc elm]

0.15

[astral bough]

If I had to guess, you're accidentally double clicking by letting go just enough to push down the key.

You can try a few things. Enable the RT effect in Wootility, which shows visually when you let go and trigger a key using Rapid Trigger. You can try increasing the actuation a bit to something like .4mm or outright disable rapid trigger to compare.

[zinc elm]

it's what i thiinking first time maybe i click too fast or i reactivate too fast and push down the key but it's not that when i do the test of double clicking that happen although I pay attention to this.i will try disable rapid trigger and test.can you try with my best setting on the website testing double click with my best setting to see if oyu have same problem?(0.1mm ACTUATION TACHYON ON and rapid trigger 0.15mm brightness 100)https://skill-test.net/keyboard-double-click

[zinc elm]

if i desactivate rt the double click happen a lot less.i continue my testing and when i reactivate rt and disable continuous rapid trigger double click happen and quad or triple click happen and on space bar it's really easy to see

[zinc elm]

i separate upstroke downstroke rt and when i up the upstroke setting only the double click reduce a lot then it's related to that.can you search on this or help me about this thanks

[zinc elm]

another update i rollback firmware to 2.6.21 and the double click reduce a lot and maybe totaly disapear so it's related to the 2.7.1signal test , 2.7.3 build and 2.7.3 beta 2 build

[zinc elm]

2.7.2 build no problem too

[zinc elm]

problem increase with last 2.7.3 beta 2 build i roll back to 2.7.2 for the moment