Could you assemble my board with switches south facing?

[cold wren]

Placed an order for a 60 HE, batch EU asteroid I believe. Was wondering if it would be possible to have my board be assembled with all the switches south facing rather than North.

[dense jetty]

Thanks for posting your support request!

Please note, the support center is only for community-based support with technical troubleshooting and general questions.

For official Wooting Customer Support, please use the Contact Us button on the Wooting Hub or email your request to [e-mail]
note: use the email address associated with your order for fastest resolution

Looking for information about your specific order?
You can find that on the Wooting Hub! There you can also add upgrades, change/confirm your shipping address, and much more.

Is your order about to ship and you need to pause it for any reason?
Place it On Hold via the Wooting Hub!
https://hub.wooting.io/login

[valid fulcrum]

they are assembled by the factory including switch's
If you have a switch puller you could do it yourself fairly easy / fast as the switch's are not soldered in

just keep in mind the LED are North facing and as a result less light will get through

and the switch's don't have any reports of Lekker switch's having incompatible with south keycaps
(at least that i have read about)

[cold wren]

Sounds good, thanks for the reply!I have decided to lube the switches so I will have to pull them all anyways. Have heard that cherry profile key caps in particular have a point of contact before the switch bottoms out when North facing (causing extra noise).

[scenic arch]

North or South is fine 👍, just don't do it west or east facing because you could damage the leds

[silk shore]

Nope

[silk shore]

To add to my previous comment. No, you should not need to south face any of your switches.