#🔧│keyboard_modding
1 messages · Page 788 of 1
i think the only diff is that ansi has bigger lshift and slightly smaller enter
so i dont think it will take long to adapt
hopefully, i've never really used an ansi board for more than a day or two
Explain
If you need me to explain it to you, it’s already GGs
The evidence is above
Quite literally nobody is talking about Poland and you insert yourself and make it about you with some weird “yez boland is better :POWAGA:”
I was bantering with phish and you @ me with some nonsense idc lmao
английский в чате плиз
抱歉 老兄 
thats why we ship a pack of bumpons with every order for free to raise your wrist rest ;)
keebmat right?

yep
Hi, so i did wheel weights mod to my tofu 60. Will my pcb get short circuit if i didnt put foam in my case?
The board wont screw in if I put foam
Should I remove the wheel weights instead?
tofu v1?
kkb sojus 
40HE when
idk but i really like this for some reason LMAO
lemme search it up
too blue for me xD
kkb sojus with the white alphas
its what im currently running
white alphas is actually pretty damn nice
super pretty
Question
sure
do you have a picture of the translucent ones with LEDs on?
very curious on if it would be blinding or not LMAO
thank you :)
around 70% brightness
though with this set ive been running it with rgb off
np
its my first quality ABS keycap set and i love them
@tired shard guess what 
hey chat, how do I know for certain that my spacebar is ticking
I'm trying to figure out if it is or not but I cannot tell
Send a sound test
hi thockson 
Alright bud 
Sounds fine
It's just rattle
Like if you tap, not press, but tap on the side ends of the space bar and it ticks
That's how you'll know
Add more lube or grease to the wire
Atleast you won’t have to rebalance ☝️🤓
If you have a super lube bottle you can just squirt it into the exposed stab area
Squirt 
I have a syringe if thats what you mean
You joke but that’s what happens 
where should I put it
Also gud
I was waiting for an Alright bud but alright bud
I already did, it’s on cooldown
LMAO
In the hole where the wire inserts
Front
yay
If you flip your keyboard upside down, it should be facing you where you need to poke and fill
That’s how thockfather explained it to me atleast
Good ol pops

What board and case is this?
this is a wooting 80he with the zinc case
Ah you're fine then
oh yay
Could maybe be case resonance
It is
Near space bar area
foam time
The rebound has its own sound but with case resonance it might sound like rattle
Sometimes if you don’t have enough reinforcing top/bottom it can sound more metally
Having polyfill on stand by helps
But you can mask the sound when you're typing on the alphas
Notice it on GT80 when I used stock foam
UPS 
Like my neo65 sounds so high pitched and thin on the alphas and space bar but when go together it just blends well
They haven’t shipped my stabs yet
I ordered it last week

where to? 👀
Arizona
Barizona fun
Yay?
Get a nice enough house I’d move there 
Hear it a little less
idk what on earth that is but it's so real
it's enough that when I am typing I don't notice it nearly as much
so I think I win
I type light on these switches :>
Worst case get some polyfill and put some near space bar
! didnt watch kpop demon hunter spotted !
Should fix the issue outright as long as your stabs aren’t busted
I do not have netflix
who said you have to watch it on netflix 
Basicly uncultured
morals
fair enough
I don't pirate until there's no other reasonable way to get the thing I want
Now there’s someone that works for Netflix 👀
just the songs for the movie makes it good enough to watch
like I'm not spending a hundred dollars on an old 3ds cart but I can always just piggy back off of my dad if I really really wanted to
ooooh I will try
nrn though because I don't feel like taking everything apart again for today
Ya, it sounds good enough
that's what we strive for here in the business
netflix with ads is $8 iirc
but thats 1080p
do I look like I have 8 dollars lying around? I just bought more tactiles 
must have some coins between the couch cushions..
LOL
how do you get that woot icon thingy
when picking up switches for a 60% do you guys just get the minimum needed, so like 70
or do you go for a full kit incase you want to move them to a larger keyboard in the future
70 yeah

i just bought Topographic keycaps and they´re soo cool
i´d buy the minimum
flux deepclack don't need lubing right?
No
hype ty
upcoming madlions titan68 turbo looks awfully familiar
Looks different enough to me
it's going up against mchose and their upcoming ace68 turbo
lightbar, removable side plates and volume wheel
nice nice
I never pirate 
frfr, aliexpress the goat
Almost $16 cheaper(even without coupons)
thank you, +500 social credit! 🇨🇳
ooh!
yessir
the yikb stabs would be good enough right
cause i prefer buying everything from 1 site and not waiting for everything seperately lmao
or staebies 2.1
W
get rid of that ahh case
Send that pic
that was my thought when I saw the box and unboxed it
for GT80
looks nice but where da wood
which one would you guys recommend both are on kbdfans website
What is the case?
I pick yikb x typeplus
alr ty
GT60
do yall think these keycaps would look better in a silver or white case
I think it would look fine on either, both will have a slightly different contrast (think leaning silver, depending on the hue of the white since those are kinda icy blue/silver colored
fuk the wood lmao
@tropic urchin the vision is complete
No wood no good
holy shit this sounds elite
@tropic urchin might be onto soemthing with the CF plate
kidding looks nice
i have the marbly tech
🤓
this silver is so nice
@sacred elm you wont be able to see the top accent piece at all while using the keyboard
unless you got it directly under you
i had to cut the tofu case foam to fit the gasket mounts
also the wooting wrist rest is like
1mm taller than the front of the case
but that doesnt bother me too much
LAME
Pom plate + DCF??
@tropic urchin
cf + dcf 3 laters tape mod, silicone outer, poron alphas
gasket mounted
using tofu60 redux case poron case foam
Aura
I need to get some more tape since I ran out but 1-2 layer DCF + CF plate + Poron gasket on GMK has been unsurpassed for favorite build to use
thoughts on the build 
oh yeah
I know the vibe, I like it
@fluid ravine @tulip rapids
sounds more clacky in ST, but the irl once you get it right is nice
Hey Guys
does anyone have Experience with Thockfactory?
Wanted to order Custom Keycaps there
Are they good?
@tropic urchin lowk, i think maybe ima switch back to white number row and white spacebar
Idk I’ve never got custom keycaps but I’ve always admired this company product:
Thank you 🙂
Yeah it'll look even better that way i think
But the number row is kinda cool
man this silver is so nice
@tropic urchin i didnt expect the screw driver it came with to be metal, id assume it was full plastic

i mean it was still like $200
after shipping
it comes with its own carrying case

kbdfans hooking me up with the gt60
Brother what switches are these?
@tropic urchin after a day on the Alu plate, it's not bad, I like the stiffer feeling and pairs well with the deep sounding Tikkens, I might remove the foam I have in the bottom though, feel like it's making the stabs sound weird
Yeah indeed
Show side profile 
HMX astrolinks iirc
Yo guys the rakka atlas pcb on taobao are real ?
How much for the case ?
yes ik deskpad needs a wash 
Link?
(order info has wrong plate, was fixed through support)
I write rakka atlas and when i am looking for cases etc every Time i saw it
idk if they are real
Only 100$??
i was thinking around 150
it basically is around 130 cause you have to buy the plate but gaskets are optional
and the shipping 🥀
but worth it
put it to good use

comes with metal screw driver with 2 bits for the case and a carrying case for the keyboard
and there is me who has been waiting for the vella for 5 months
it's delayed until next month
🥀
normally for the vella60 it also gives some things like that I really can't wait because it's going to be my first custom
Idk actually 
Very clean bro 🔥
someone has to sacrifice
see if it's a scam
gasket mount feels pretty good though i think itd work better with polyfill instead of poron foam
its got enough squish to it
Half a week has passed since my last customization… The urge to buy a DCF and the appeal of the PC Agar are only growing stronger
the tofu60 redux is heavier than this case with the brass weights
Yo im looking for some really cool nice lighting profiles anyone have any suggestions ?
@harsh dove I also secured another artisan
sashimi opal has a new friend
@stray tiger you really were not kidding
Ooo shiny
best part is most of it is covered with my cash back rewards
if i get 2 more artisans i might put them in the nav cluster for 80HE and collect the infinity stones
That'd be neat
ik 205g0 is good enough for stabs but would 3g of xht-bdz be enough for all the 80he stabs, just curious
ima be fr idk the differences between typing feel all my questions about them are obsolete
Definitely
dont think so
neat
quality might diminish over a long period of time, but dont recall seeing anything like that tho
where you get the carry case
They give it with the gt60
for free?
I think yes
shhhhhiiii
Why do the tikkens so sound bad in my 60 HE + but the 60 HE V2 sounds so much better
There must be something in the 60HE V2 that is making the soudn so much better than in a 60HE +
They sound pretty dead and dull in my 60 HE
I can send a sound clipping of what they sound like in my board
it depends on your build and what you have available to try and experiment with imo, think v2 is also using friction fit
Basically its a stock wooting 60 HE + including tikkens
Mine is not friction fit
are you using steel plate
i think thats problem #1
steel plate makes everything very harsh
V2 was using FR4 plate which is alot softer and would sound better
if you like steel stiffness id consider using CF plate
Oh I see
I used tikkens on CF in my 80HE and I thought it was a nice combo
Any other suggestions besides plate being #1
id look into FR4/Alu and CF for alternative plates depending on what stiffness you want
depending on how much you wanna spend new case + trying to get friction fit might be worth your time
I was going to buy the 60HE V2 module kit and build it entirely myself
yeah probably more worth to do this and plan a new build out
I was just curious what I could do to make it sound better why it doesnt sound ghood
big thing is the steel plate
Did you listen to the audio I sent cause it sounds very dull and boring how would you describe it
Cause when I listen to 60 HE V2 audio it sounds very poppy and lively
Opposite of dull
Atleast it sounds poppy on the bottom out I mean
I did a bit, some of it is the tikkens have an interesting sound profile and can be muted/clacky it alternates for me. I think steel contributes to alot of the dullness. Poron pad might be worth looking into as well
70-85% of your issue im pretty confident in changing your plate will make you happier
Thanks
wootstation post being reuploaded in 18 minutes 
damn you 1hr cooldown
@tropic urchin tx switch puller delivered today, hands on em on tuesday

though DCF are fairly really easy to pull out
In my opinion whenever I hear the difference between friction fit and screw-in, friction fit removes SO much of the chatter and other noise that is happening. This video really clears that up and can tell a huge difference if you blast your audio a bit through headphones, https://www.youtube.com/watch?v=xFCu2hSg-oQ
Many requested a sound test with all the new switches in the Wooting 60HE. Now I can please all of you with a proper friction fit sound test! Switches tested in the video are the: Lekker V2, Genty Silent, regular Jade, Jade Pro, Jade Max, Magneto RGB, Magneto POM and the RAW HE.
🛒 Get the Friction fit pad https://wooting.io/product/friction-...
Friction fit sounds so much more cleaner and removes all that other noise or sound that is going on inside the case atleast it feels/sounds like that
yeah friction + new plate and you'll be a new man 100%
Yeah definitely new plate also didnt even mention that part
the PC plate sounds so freaking nice man
if you want more quiet/muted PC is a good choice too
i added 105 oil to my cart but now I realized that its completely pointless due to me not wanting to lube switches
get a syrnge and js squirt the lube in there if it isnt a box stem or the fluxes
any tutorials with that?
idk its just been talked about/suggested here before
anyways i wanna see what the full blue base set looks like and my pbtfan crossahairs look in a silver case
i mean isnt the factory lubing on tikkens good
should be yeah

bro the tracking websites are so slow with updates
it just sent me a notif its on its way for delivery and i got it 4 hours ago
how are the tx-ap stabilizers?
Not bad, I personally recommend Swagkeys Knights or TypePlus x YIKB
Imo all stabs sound pretty similar once you tune them
idk when i should get new stabs cuz im changing everything lmao
@tropic urchin @rotund perch
Blue
huh
should I just get them with my gt-80 or
oo
Real
Thockfather is a bad influence
Even though he has perfected my board with gemstone artisans
Now what are my future 2 going to be
so
wooting switch puller is on the edge of breaking
again
i see a mini crack on 3 of the 4 tooths 💀
dont even say anything the tx switch puller is on its way
Too bad it isn’t the blessed Hateron puller
Tx definitely much better than the Wooting one tho
Nothing you can buy from Gateron is blessed
Let’s not get carried away
Everyone in this Discord hates it. Unfortunately they’ve also never used it. It’s a secret just for me 🤫
Nobody hates it, it’s just overpriced
And apparently can scratch the plate
Hypothetically speaking
Hypothesizing keyboards
Nothing is more red pilling about not buying Gateron than their switches tho
It’s finally time again for my girl to get spoiled
I refuse to be contained to the pets channel, y’all needed it
You can always use #🍲│food
Good for you that Mark is currently offline
That can always change 
Or he’s already on his way to get you…
My king
Have you tried to lube DCF? I mean do I ever need to order gpl102 with dcf?
No shit sherlock
Horribly executed
thats what passes for funny in poland
Not yet, ordering some super lube/krytox since im out
There is more funny jokes but cant say it here
Ok, then have you tried them with POM plate?
If you use GMK it’s interesting
It’s not very loud but it is kinda poppy
I didn’t do full build since I like more volume but it was something worthwhile if you like that
I just want something harder than PC, but I feel like the damn top mount won’t work well with an aluminum plate for me
POM should be little stiffer, it’s still pretty flexy
swing and a miss
@trail bane sent you a DM for my unscientific POM test
Ok boss

Impossible to verify but ig
based vs unbased keyboard 
if you say raeds 3 times in the mirror with the lights turned off, your keyboard gets a sound nerf 
Gn
How could I make the Wooting 80he Zinc Alloy sound like that? https://youtu.be/iOOalEorTmg?si=6CBCWRWeFKYorrT4
after like 20 days of asking, here are the oil kings
I hope ur happy :)
the switches are actually really nice and better than I thought lol
they are really creamy and thocky
specs:
gmk67 - stabs lubed with krytox 205g0
gateron oil kings prelubed
Japanese white pbt keycaps
subscribe :D
…
you wont get MX sound in HE
you'd pretty much have to accept HE limitations or build a custom MX board to get that
For HE, which switches come closest to this?
i dont really think any do
I mean the most thocky switches for HE
in HE you have a few options: 1). Membrane keyboard sound --> silent switches or raeds, 2), you have generic clack, 3). you have deeper clack and 4). you have bright clack
Step 1: throw 80HE pcb out
Step 2: get MX pcb from KBDFans
Step 3: get Gateron oil kings
thocky is just a marketing term to describe certain switches, thocky is different from person to person
Yes, I mean the switches with the deeper sound. I like that feeling
Tikken, Deep clack flux, UR Ice Ultra and Phylina thunderbolt/thunderflash are your options depending on how much you wanna spend
I mean switches that I can get from Wooting
here you can find any switch sno has tested (all of those i mentioned are here)
wooting sells like 3
your only option would be Tikken
Ok ok ty
I've also seen these, and they seem to have a deeper sound than the Tikken https://youtube.com/shorts/L5HpiH5jabE?si=KoiyjtS_0JTYoqK9
Review coming soon! I'm in love!
since sno tests it everything on the same setup i would take a look at how TTC Helios/POM sound on his sound test instead of referencing different sound tests as sound tests have alot of variance between what you hear and what you're going to get irl
Yeah, TTC switches don't sound like this. Seems like this recording hides a lot of chattery and high pitched sound.
@ocean escarp alot influences the final sound of your keyboard (case material, switches, how much foam you use/how little foam, switch plate (important), what switch plate gasket you use (silicone vs poron for 80HE), and also keycaps. theres alot that goes into it
each build you see on YT is going to be very different so its not a great barometer
You're right, but I don't know what to base my decision on in order to get the deepest possible sound with the Wooting 80he Zinc Alloy
Zinc is a good start, you want one of the deep switches I mentioned and then pair it with FR4 or softer plate material
Just get zinc, module and Tikkens.
Ok so if I get the Wooting 80he Zinc Alloy, the switches with the deepest sound are the Tikken ones, as far as I understand
Yes
off the wooting store yeah
but its really personal preference
its a good starting point
Thank you very much, but are the Lekker Tikken Medium already lubricated?
All switches sold by Wooting are pre-lubed, except TTC
Ok nice ty
Guys, I really don't know where to get these keycaps. What do you think? "https://www.etsy.com/it/listing/4374610984/tasti-retroilluminati-rgb-giapponesi" or "https://www.xvxchannel.com/en-eu/collections/keycaps/products/xvx-plum-blossom-cherry-profile-double-shot-5-sided-dye-sub-pbt-keycap-set-127-key"?
might as well try the etsy ones if you like them
not going to find too many other sets anyway in that config
Yes, they are both the same set of keycaps. I would like to understand which one is of higher quality
Yes, but on Etsy they seem to be made by a craftsman for xvx. I don't know, there's a €20 difference between the two
im not sure i personally buy that
if anything its just being upcharged on etsy for the same set
Mmm ok it could be
Have you ever ordered from xvx? What are they like?
nope
only keycaps i have are GMK, PBTfans or the ones from wooting store from my original order
Get aifei caps or ghost judges caps or xmi caps, those are cheap and good
I was in your position originally and wanted to find other shine through keycaps and after looking I didnt find anything worthwhile so I gave up and went GMK
Yes, I've been looking at keycaps for weeks. I always check the materials and description, and these ones are made of good materials
id just get those and see how you like them, worst case you find other keycaps
Ok I saw these two reviews on xvx and they don't seem that great. The ones on Etsy could probably be better since they're made by a craftsman
I am waiting for a response from the manufacturers on Etsy
Both sets are going to have similar quality probably (if it was made by a craftsman, there would be noticeable differences). Honestly, if you want good quality, you’re going to have to make compromises from cherry profile, double shot PBT shine thru to either what’s on Wooting store or abandon shine thru for something else.
They look like any other keycaps you’d find off Amazon and will have similar quality as other sets found at that price point
Ok ok thank you. I can't do without the shine-through feature. The important thing is that it has the features I want
akko astrolink / geon raptor v2
(they are the same, just diff color)
You can probably get the same keycaps on AliExpress for around $10. Don’t expect high quality from art printed keycaps, they’re usually not very durable.
Id settle for dyesub PBT + cherry off Wooting site and then get best stability deep switches or also get tikkens
Anything else is going to be more of the same of what you’ve found and not as good quality
That’s the unfortunate reality of some keycaps
Ok I want those keycaps because they look really nice. I could sacrifice a little quality for aesthetics, but I would do it. Are you sure they would be the same as the ones on Aliexpress?
Yes, but aesthetics are also very important. The important thing is that at least everything else apart from the keycaps is of good quality
I found these on Aliexpress, but are they from GMK or am I mistaken? https://it.aliexpress.com/item/1005005621702972.html
genuine gmk starts from like $90, and there's no actual gmk on aliexpress
Besides clones anyway
Ok ty
GMK is also exclusively ABS
erm ackually 
gmk samurai starts at $60
true, this is a set constantly made for drop.com
so 60% kit is cheaper
I am looking for exactly this set
So buy that set
Both websites we looked at sold the same set, 1 with a weird scalped price on Etsy and then XVX
They make MTNU as well which is PBT 
Yes, I was just figuring out who to get it from
the set is going to be same quality so get whichever is more convenient vendor wise
Ok so you recommend xvx and not Etsy. Not Aliexpress, because they cost about the same but could be even worse
A lot of stuff on Etsy is just upsold stuff from aliexpress
keycaps id assume that would be the case unless if its artisans most likely
yeah bc theres only 1 set for that so there isnt going to be really any differing quality wise
Ok thank you for all your help. You've been very kind 
lmk how the build comes out 🫡
Don’t be afraid to pivot either if you find a different vision also
Of course, for now, what we have said is the best for me
I bought my set off etsy and all I can say is I wish I bought it off Ali and saved like 15 dollars
@rotund perch wood lwk looks like shit icl
side brass accent piece is actually ok
Wood looks good if the whole keyboard is themed around wood
That just doesn't😭
Brass looks much better
for me its the dots on the side of the piece of wood
it just... doesnt do it
Yeah, especially because of how light the wood is
is the stem wobble on the raw he good or bad
Average
how about on the jade max or jade pro
anyone have hmx crystal soundtest?
I’ll add it to database tomorrow with soundtest
whats the difference between top wobble and bottom wobble
High top wobble means you might actuate when resting your finger on the key, high bottom wobble means you might accidentally release the key just by wiggling
I have some jade pros, I'll show the wobble hold on lol
They're still in the box
and raptop v2's are rated highest on average for both
currently they are the best combination
besides the holy60 and the tofu60 redux, whatre some of the most popular cases for the 60he
Frog mini Leggera T
isnt that the one commonly used on the venom60
It is made by Geon like the venom60 yes, the T version is the Wooting compatible version
Alumaze, optimum
GT60 just came out but will also be popular
oh 11.11 sale on aliexpress isn't far off
good idea for people to start thinking what they might want to buy if they have aliexpress things they might want
that's the biggest aliexpress sale each year
i just got my gt60 today and swapped from the tofu60 redux
just make sure its the kbdfan gt60
and not the gateron gt60
Brazen just gave me a free shipping code...
It was going to be 50 euros otherwise
I think they f-ed up lol
not nessiserlily modding but does anyone have good usb c cable recs? ik wooting's use a lot of power so cant just use any one but i need a longer one for when my desk is raised, currently using the wooting detachable set
you can just use any cable
the issue is often the usb port as in not enough or not stable enough power is provided
oooh thanks for clarifying
just stay at 2m max to be safe
and then ofc just dont get a charging only cable (yes thats a thing)
beige 
struggling to decide between getting the v2 in the metal case and keeping it in that, or getting it in the abs case and getting a holy60 and putting it in that

Plastic case won't be available until March
If you want to use Holy60, then probably order module
i know the video said $180-220, was that the plastic case price range?
Yeah, plastic prebuilt
might do module, depends how much the metal case prebuilt costs
think i might go ANSI Split, since I usually go ISO
ANSI superior layout
I decided to go split, might aswell try something new
Kinda gauging the cost of the metal case with how much the 80+Zinc case cost me
ANSI > ISO confirmed
based
wait I read that wrong
Not wearing any hat, no cap fr fr ong
wasnt it $180-240 usd and plastic was the lower end of that range, metal being the higher end?
fax, no printer
@sacred elm
https://youtu.be/Se5QsCctXvY
This build is super interesting, I'm a big fan. Cherry still wins in this board though
Board: Kohaku
Plate: Carbon Fiber
Switches: Creams (1m actuations)
Keycaps: GMK Evil Dolch
close to optimum
guys, is it me or the tikkens have a bit more stem wobble than the Lektor (Lekker v1 stem on Raptor HE v1 housing) ?
"lektor" is very tight because these parts are not designed to fit together initially, thus reduced wobble, but increased tightness
to the point it can be too tight sometimes
so its natural that tikkens have more wobble i'd say
Maybe
Chimeras can be more stable than titons surely
yeah like arc said, lektor is going to be tighter than most switches, including a lot of current top gen stuff. They're literally too tight to the point they have a bit of weird friction until you wear it down
i still have some lying around somewhere actually
where do yall get deep clack for cheap
Aliexpress shops
cheapest ive seen there is 90€ for 70
Toronto keyboard man also put them up
I think eu has less options too
not available at my location
A lot of the usual shops don’t appear for eu
so they expensive for me then hm
Germany?
yep
yeah you're cooked
ah yeah Wizard cant order em too
do we have tariffs on pink switches from china
I’m ready for the next wave of switches in a few months
what do yall pay for them
I’ve heard rumors of some neat stuff coming from some brands
raeds v2??
Any new marbly clack introductions
I got 90 for abbout 70eur
62 eur with no tax and free shipping
for 90 pcs
damn
I can’t say who/what without exact details but there’s some switches I’m excited to try once they’re out
Let me rephrase in less coded terms: Will I be interested
But that’s how it always is with switches in that there’s always new stuff around the corner
Thumbs up or thumbs down reaction only needed 
I think you’ll be keen on 2 of them if they turn out to be what I’ve heard
Although those hmx crystals are neat too i guess
when they gonna be on the list
I’ll do a proper test of em tomorrow and soundtest record them
bro who picked these colors
I assume it’s going to be exactly what people expect which is raptors with different material bottoms from my very early playing around with them for a few mins
They look better than the red purple POM colors
Ooooooooo
can u ping me if you dont forget
Yeah sure

They're loud so probably not for you lol
I heard they were awful so they weren’t high on my list to test lol
love that for my HE switches
4mm or bust

When 8mm switches?
Shit don't stop there, I want switches measured in cm
high profile switches
The switch for high society
nah huh
Speaking of high society, I got a little crazy with my build for the people who keep ragging on my spacebar right shift version 
No RGB mode but except for lightsaber bar
Classy
I would’ve matched it up but unfortunately it didn’t come with a blue tab key
So making the most of it with some color contrast
I would change the ctrl and windows key to white to make the blue slide down smoother
I’ve got to figure out what config to run my personal v2 split
Raeds
The optimum one has to stay as it is for sound tests but I got a personal one now that I can mod however i want
Modern tech design/layout meets ancient back pain
Change windows and control and leave alt original colors for both sides or do full swap
I was debating doing windows key swaps but looked out of place
Mmhm
next we need switches with force feedback for racing games
New $3 per switch idea
when u wanna press the switch but the switch presses you back
bring back the spacebar
Then @calm pulsar and aligner is going to roast me whenever they see it 💀
3rd color works well here imo
then hide it from them. their eyes don't deserve it's innovation
Say, put the circular blue as L alt, and put the L close together while leaving R alt untouched
Left windows key just be white
Man I just say those finalboy posts, centerpiece software is a year out from being in finished state that he wants?
I’m curious to see what it’s like at launch then
Well aligner is responsible for the DCF church growth and Mr arc is a based individual
too much praise for someone who's gonna end up with spring crunch
(havent got any)
Bros hard flexing on me now
really looking forward to seeing these on aliexpress
hope this design improves in the future and there's no spring crunch
liking the astrolinks with the stock 80he plate, don't even want to try anything else
@tropic urchin silver case 🌹
How unscientific
No happiness allowed
i thought about astrolinks at the start lol
Not tikkens you’re not allowed to look
Divert thy gaze
and waste alot of money on shipping
spongebib
spunch bop
Eepy chat
lol what are you rocking on your daily HE ?
astrolinks
What?
Ah
but same switch
What plate?
80he, stock PC plate, silicone insert, GT80 case
Yeah sounds soft
Nice
Didn’t knew you had an 80HE
What a poser
Jk lol
I am a stronger adherent to the Marbly Clack faith
lol fs
got it recently lol
Arc is just a fellow co-collaborator since we have an overlap of taste 
I need more good clacky switches
None of that half assed bs
If the hmx crystals sound good they may be my endgame
just use a hard plate and most switches will already be very clacky
crystals will probably have a brighter bottom out than raptor v2s tho, cause of that cf infused bottom
think sno is going to do a sound test later
This build is unironically what got me to ditch RGB somewhat since the marbly look of Lazurite looks really good when you reverse the colors so blue is on WASD area and the right side is the white alphas
The only thing I dont have is a home key which is annoying but whatever
there's no home key at all? or is it blue
idk if i lost it or what but i cant find it anywhere
legit
its bizarre
need to buy a white GMK home key with blue legends
which keycaps do you guys recommend, i have a white case
Do you which colour?
I think a clean black and white would look good
But everyone have another taste
im open to any suggestions
im really looking for performance and feel more than looks and design but both would be cool
I really wanted to love tikkens but they‘re too muted for me 
Maybe itll grow on me
Yeah i‘m gonna see how i like it then and decide
They weren’t as muted as I expected but they have a more unique sound profile ish where there’s a bit more per key variance
Yep
I‘ll also need to fix the actuation on em
Cause i set my actuation for lower depth switches
Need to redo the math again 
wont really get a performance boost from your keycaps. Its going to be more feel and build vibes than anything
oh okay, i got ws dash switches i just dont know what keycaps to get
if you want basic white keycaps try looking into a GMK/WS BOW keycap set
for a minimalistic build
The best keycaps for performing well are GMK cause they‘re so expensive you feel the psychological need to play better to justify the price
if you want more variety, id try looking into PBTFans/GMK/KeyKobo for more complex looking sets
https://divinikey.com/products/pbtfan-bow-keycap-set-doubleshot-pbt this is how it would look more or less
PBTfans BOW Keycap Set showcases a black on white keycap set with additional black accents. Coming in a doubleshot PBT material for more durability. PBTfans BOW Keycap Set Features: Cherry Profile Manufactured by PBTfans Doubleshot PBT Material MX Compatible Available in: Base Kit Simple Base Kit (Non-text Modifiers) N
Gn
Not bad. Nice dude. Enjoy.
Anything I need to put in my cart besides flux deep clack for AliExpresses 11/11 sale?
Any recommendations haha
Depends if you want to try different plates ig
If you don’t have many lying around
Forgot about different plates, I'm just using the one that comes with the 60 PCB haha
Are you using steel by any chance
Nah just poly carbonate
Ah okay cool, yeah they should be fine on PC if that’s the stiffness you prefer, but other than a new plate not sure what else to add
CF wlate 
Hey Guys, any personal opinion about TIs Heavy vs Tikkens? How the feel? Are the Tikkens noticiable heavier?
just personal preference. Tikkens feel a little stiffer at start since they're 42gf start with 54gf end
the start force is more noticable than the end force
so good news, hmx crystal tested fine, it's compatible with everything and is basically raptor v2 but different sound
i'm recording sound test next, but not sure where to put it on the list yet as it's a sidegrade to raptor/astro etc
spring is 19mm also, for people curious
Any noticable spring crunch?
nope, but i didn't get crunching on raptors anyway (and flux deep clack actually have some minor housing crunching so in general i think minor crunching isn't as big a deal as people talk about)
hmx crystal he sound test is live
the duhuk are still sharper a bit so maybe the fiberglass amount is different
link !
DC Flux crunch is very minor and you have to wiggle the switch really hard to notice it. Also if it bothers someone, you can buy OG Flux and swap the DC stems 
it's on the database like usual: https://link.wooting.io/soundtests
just search hmx
sharper just as expected compared to the raptors
yeah although if you load up the duhuk sound test next to it you notice duhuk is even more
lowk might pick up a set for my venom
loading up that plus spark is funny because they're opposite
sno what keycaps are those
that's the limited edition version that is gold i think
there's a silver + black version and a gold + black version
ic
feel like my ears are suffocating, literally got home from a flight and it's been 5 days since i wore iems and my ears are popping 
did duhuk core ever say how much percentage fiberglass they used
30% i think
lemme check
interesting if they're the same percentage because the duhuks sound much more sharp
PA66+30% fiber
Hrm I wonder if just the design changes the sound that much
Duhuk are still sharpest by far
Sd is hmx crystal he, fg is duhuk
Crystal sounds cleaner
trying to search on the page but cant seem to find hmx or crystal
use search bar not page search
yeah the annoying thing about notion is it won't let me default display every entry, it cuts it off at like 100 or something then has a load more button
so not every entry loads at start
I spotted an 80HE in this video I'm watching that doesn't have to do with keyboards
yeah these are clean like astrolinks/raptors
but not sure if the carbon fiber bottom is worth the extra purchase over astrolinks
Raw zinc too
is this a video guide on pressing ctrl + f3
Yes
honestly sparks still one of my favourite for new switch sound because it's so interestingly different, but it needs right plate to bring out the sound
it's weirdly muted, yet distinct
the super short travel definitely not for everyone though, since it's noticably shorter travel than everything else
Probably due to protruding magnet?
https://www.youtube.com/shorts/c4HwFu-wQBw
direct link for the lazy
✨ Follow our socials! ✨
Discord https://discord.gg/wooting
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
TikTok https://www.tiktok.com/@wootingkb
Bluesky https://bsky.app/profile/wooting.io
Customer Support: https://www.wooting.io/support
Marketing/Press requests: marketing@wooting.io
➤ Check out...
I like these quite a lot
@fringe quarry
11 more days till v2 founders 
Hrm what keycaps to do
Might be time to bring back the tutkeys game1989 for the v2 split
ive already planned my keycaps for 2026 lol
Although geon is having thocctober sale next week so maybe I pick up something

and its actually mostly kap and not gmk
what do you think is going on sale
oh yea its that time of the year again
i kinda want to try the hmx crystals and dcf 😭
leggera on sale would be heat
Gmk blacksnail is on sale which would look nice on silver v2
do the crystals also have spring issues like the raptor v2?
they dont do current stuff on sale rite?
i should pick up black snail
Depends but usually not brand new stuff
GMK Evil Dolch 
Mono cheap gud
Need me some grrrr
Where can we get crystal HMXs?
Unikeys or Milktooth
are they eu or na suppliers? do you happen to know?
Milktooth is NA
so is unikeys
Unikeys is EU and NA
Thank you!!
I was about to be so sad
Yeppers
Oh hell yeah 5 dollar shipping 38 euros total
bit cheaper than the fluxes I was planning on :D
lol mb
their store is toronto iirc
Guys do you think write rest is useful?
yes
unless you have one built in to your desk or your desk has a negative degree angle keyboard holder/plate yes
I watched this video and I'm not very convinced by the write rest https://youtu.be/oCtwPVAN-_A?si=cJAkPWEDGkfceV1h
FREE Wrist Pain programs for any type of wrist pain: https://1hp-troubleshooter.vercel.app/?utm_source=youtube&utm_medium=social&utm_campaign=wristrests
Are wrist rests helpful for wrist pain? Should you use a wrist rest for your keyboard or mouse? What about the floating wrist rests for the mouse hand? I use science and physiology to answer t...
it kind of depends on how you use it. The negative of wristrest is IF you push down with your wrist it's bad, but it's also something you shouldn't be doing
that's why there's always the "yeah but wristrests are bad because of this issue here" videos, but it's just about how you use it
if you use wristrest correctly then yes it's beneficial, if you don't then it's not. So the takeaway is don't push downwards into the wristrest and you benefit from a better typing angle
^^ this, as shown in the thumbnail of that video on the left side, he has his wrist flat against the desk with no wrist rest, you're actually supposed to float your wrist when typing without a wrist rest like that and as Sno said, when using a wrist rest, not to push down into it but rather literally rest your wrist on it as the name implies.
( I didn't watch the vid so idk if he explains that)
thx
Once again, I’m convinced that a keyboard carrying case is such a great thing

especially for travel
i am honestly thinking of getting the gt60 just for that travel case (and cause it looks good and would fit great with my gt80)
Yesh, buy the 60hev2 carry case
And 80he
And another one with white zinc
And another one based on your custom case
It’s super convenient for me, I can leave the house with it, go to the dorm, and then from the dorm to classes or practice.
Or bringing it around as a lucky charm
What I'm wondering is, if I don't have any problems in that area of my wrist, is there any point in taking it? Can it prevent this pain even if I don't have it now? I don't want to get used to something that isn't necessary
walking ur wooting is necessary

i love taking my wooting for a walk
do you carry your mouse with you too?
no one can answer that for you. wed have to be able to see into your future for that one.
wrist rests arent a magic cure they are preventative care
Hey guys
Yep
damn the lekker tikkens feel so good, no regrets upgrading from my jade pros
blasphemy
jade pros could never be topped
what about Deep Clack Flux
even the blind squirrel finds the nut
The one eyed man led the blind squirrel to salvation
You didn’t hear that from me tho 
still can't decide between flux and tikken, maybe I wait some more until wooting 60hev2 plastic
It’s really just if you want deepness + max stability or if you want deepness + more unorthodox feel compared to the standard 3.5mm + feel
either will really do fine, I guess I could go for max stability for a change. Never tried box stem before
Just depends if you’re sensitive to top wobble since that’s where tikkens are weakest imo
Since you already have Owlabs, Owlab -> Flux will be bigger upgrade than Owlab -> Tikken
Oh that’s right
If you’re getting v2 won’t your tikkens be dirt cheap to buy though
Since it’s usually heavy discount with module
this is for 80he, for 60hev2 I already have another switch in mind. Besides, getting the module also only give me just 70 switch.
Might as well just get prebuilt for tikkens included unless there’s something specific you’re after that requires module
Oh maybe you need module for the cursed split 
me want strap
It's not cursed, it's perfect.
Makes sense
Pötato, potato
you called for me?
are there bonuses for being in the founders campaign 
Maroon colored role
Especially if you preorder - I don’t know what our actual final perks list is so don’t take this as a leak or anything, but last time we gave free set of switches with bonus
Jk idk the color
pog
wouldn't be able to tell you either way tbh im colorblind as fuck
So id at least wait for campaign to launch before you decide
Tuff
soon we'll know. I think stream this week?
Oh they announce it when the campaign opens?
this is the most fortnite player name of all time
i dont play fortnite haha
Yeah perks will be revealed with launch or just before normally
nvm


