🔧│keyboard_modding

[stone flax]

uhuh

enjoy then

[reef oar]

did you use honey at checkout

[frank mica]

and stood on their claim 5-10-12 months after

[frank mica]

no i uninstalled that years ago

[kind helm]

UwU version of mj still sleeping

[frank mica]

it never gave coupons

[reef oar]

[frank mica]

you have to admit current consumerbase is significantly less inclined to buy a new keyboard compared to people who havent bought from them before

[reef oar]

i guess but it kinda depends at the same time

i think gamers that bought the 60 and just used it stock and chilled probablu bought the 80 if they were on 80 before and were only using the 60 because that's all wooting had

[frank mica]

vocal minority vs. majority situation

[reef oar]

most people aren't even doing the easiest of mods of taping their pcb

so yeah the layout sucks but

[stone flax]

Talk to me when tsangan exists

[reef oar]

is what it is

[frank mica]

ngl i couldnt hear a difference between tape and no tape

[stone flax]

wootings locked to 6.25u

gg go next

[reef oar]

add more tape

[frank mica]

plus i am NOT pulling out my board for a girl to see random tape on the bottom

[reef oar]

why is your girl dismantling your board

[frank mica]

im dismantling it to upgrade case

[reef oar]

is tape on your pcb l rizz guys?

[frank mica]

yes

[kind helm]

also why are you showing your keyboard to the lady

[frank mica]

that looks stupid

[reef oar]

i'll take all the tape off then

[frank mica]

they can walk in on u working

[reef oar]

i can't have the huzz laughing at my pcb

@frank mica you tape INSIDE the board

[frank mica]

REAL

[reef oar]

I'M CONFUSED

[frank mica]

ruin the board

[reef oar]

hold up

you're not getting off this easy

did you tape the bottom of the case

[frank mica]

point being it makes the board look broken / damaged, like you didnt take care of it

[reef oar]

you taped the bottom of the case didn't you

[frank mica]

LOL

[glacial wind]

ngl my partner would not know what would or wouldn’t make a bottom of a keyboard looks broken/not broken

[frank mica]

i have not used tape anywhere near my wooting

[kind helm]

preference

[reef oar]

[glacial wind]

Where are you guys finding partners that care about what your keyboard pcb bottom looks like

[chilly mural]

ayy, more cooling the better

[frank mica]

i am 21

[reef oar]

you don't understand. they hate tape on your pcb brother

it's L rizz

[glacial wind]

College must have changed a lot since my days

[reef oar]

i pulled out my redux and she said

hold up

open it up

and she saw my tape and left

[frank mica]

have nice things, take care of them, etc.

[kind helm]

clearly she is not worthy then

[frank mica]

u just dont put tape on things, even if it'll make your phones watercooling work 10x better

[frank mica]

LOL

[glacial wind]

“Why does bob in room 432 keep being shocked and hiding his keyboard when we go in to ask if he wants to go pregame?”

[frank mica]

gotta hide that blue tape man

[kind helm]

meanwhile mr. thackson shows off his battle scarred tofu clone like its nothing

[frank mica]

thockson*

[tawdry tree]

thackson*

[tawdry tree]

tape shaming is not okay! it doesn’t matter what you have in your case as long as you like it! 🥰

[fluid ravine]

Thockson
Clackson
Thackson
Turkeyson
Frostson
Etc etc..

[tawdry tree]

known by many names

[fluid ravine]

[chilly mural]

Saxton Hale!!!!

[kind helm]

if thack is thock + clack, does it mean thack is actually cream?

[frank mica]

r/wordstoconjuresatan

[tawdry tree]

The Creamson

[ionic breach]

loobed going thru it rn

[kind helm]

whats the drama

[ionic breach]

multiple discords are on fire

[calm pulsar]

yeah... hope my luminkey arrives xd

[chilly mural]

ooo, drama?

[ionic breach]

a fking lot

[chilly mural]

gimme tldr

[ionic breach]

a message from alexotos a few min ago

basically money issues

bad at business

[kind helm]

oh no

[calm pulsar]

wtf he said lx60 was paid in half or 75%...

damn should I refund then...

[chilly mural]

condolences

[kind helm]

@stone flax your take on the loobed situation :3 ?

[calm pulsar]

I really wanted a new case for my venom

[kind helm]

i guess wait for leggra

[calm pulsar]

I have the frog mini, I don't need leggera

[kind helm]

honesty i'd follow alexotos' suggestion and just wait for something else

[calm pulsar]

lol

[kind helm]

fuck is a partial fulillment?

[calm pulsar]

seems like they agree to only provide some part of the initial order

[kind helm]

that is bs though you paid for a full set of items

[calm pulsar]

yeah it seems between the vendor and manufacturer

[ionic breach]

so he wants to fufill what ever possible

and refund the rest he cant fufill

its reasonable

[kind helm]

that makes sense

[stone flax]

everyone knows loobed suck

[kind helm]

that would be fine honestly just a gamble with not much to lose

[calm pulsar]

it still seems weird on manufacturer's end
chris says he helped distribute samples for content creators in US

[stone flax]

who tf buying from them

so

susge

[kind helm]

not everyone knows

[calm pulsar]

I want a new fucking 60%

[kind helm]

tofu 2.0?

[calm pulsar]

I dont like the looks, which is why I sold my 2 tofu reduxes

[kind helm]

my guess is that tofu 2.0 most likely is frog mini but worse though

[ionic breach]

:) protaganist

[kind helm]

that one is indeed interesting

[ionic breach]

from not fking loobed lmao

[kind helm]

and if anything happens you get to suffer with cam

[ionic breach]

there will be some extras protags instock

[kind helm]

instead of suffering alone

[ionic breach]

wait cam got it from loobed?

[kind helm]

think mr cam got protag

[ionic breach]

ya but protag is fine

just loobed as one of the vendors

[kind helm]

ahh me not following mb. dk havent seen him about it i think he good

hopefully he good

[ionic breach]

probably he just got it direct

[fluid ravine]

Who dafuq is loobed

[calm pulsar]

@stone flax what is the 60% you ordered recently? is it still on preorder?

[kind helm]

wasnt that name on a popular stab at some point

only thing i know this name from before lx60

[calm pulsar]

just a keyboard store/vendor, who seems to be failing at doing business

[fluid ravine]

Ruh roh

[fluid ravine]

Dunno

[kind helm]

me clueless too

[calm pulsar]

I should've preordered from luminkey directly, but they had some expensive shipping options to russia lol

[frank mica]

what are recommendations for a tofu redux w/ completely even borders

[kind helm]

i thought you happy with what you have

[frank mica]

i was going to pick freebird60 but it sounds, no pun intended, like tofu redux w/ weight is supposed to sound better?

[frank mica]

i already said i was upgrading the switches

[kind helm]

subjectively yes due to heavier weight

[frank mica]

i dont see how weight and avoustics intermingle besides the brass doing smth

[calm pulsar]

here's my freebirdie

[frank mica]

sounds good to me

[calm pulsar]

clackbird

[frank mica]

honestly no ones done an identical build in freebird and tofu so the sound differences usually boil down to the different switches and other stuff

[kind helm]

heavier case would be less hollow sounding because of physics

[calm pulsar]

yeah there's a lot of variables

[kind helm]

fuck logic i guess

[frank mica]

i watched a video comparing raw he, lekker, gateron jades, and smth else and they all sounded the same

😭

what do u want from me

[calm pulsar]

once you get your hands on open and closed bottom switches youll understand the difference better

[frank mica]

https://youtu.be/U_SwZCBQj1w

like this sounds clackier than the freebird

https://youtu.be/03Jx_kzoMks

then this sounds totally different

same case

[glacial wind]

So cam was corrupted into buying $1 switches, how about $2 switches https://www.bilibili.com/opus/1021799563282874376?spm_id_from=333.1387.0.0

[kind helm]

i can "make my board sound different" by moving the mic

[frank mica]

can u take a photo of the usbc port

[kind helm]

that is hella fancy

another one of those "i know it is there" kind of things

[calm pulsar]

i have my board in a diff case now

[frank mica]

[sacred elm]

tf is this 😳

[calm pulsar]

they are like ttc

[frank mica]

well it seems everyones subjective opinion is that lekker v2's suck

[glacial wind]

they are ttc. It's their even newer switches just announced

[kind helm]

v1 sucks not v2 from what i see from people's opinions

[calm pulsar]

I personally dont like open bottom switches so I agree xd

[sacred elm]

yea open bottom is poop

[frank mica]

pretty sure 60he+ stock still come with v1's

[sacred elm]

1.5

[calm pulsar]

this seems like highground G R A P H I C switches

[sacred elm]

theyre basically v2

[frank mica]

ill go double check the replacement switches in the box

[calm pulsar]

v1s would say gateron on them

[glacial wind]

it's literally just ttc pom magneto but they found a way to increase magnet accuracy, which i don't think is worth another $1 per switch though lol

[calm pulsar]

not sure if 1.5s as well

[ionic breach]

1.5s too iirc

[sacred elm]

will they sound different or nah

[frank mica]

ye they still come with v1's

[calm pulsar]

gg its over for you

[glacial wind]

it's same stem structure and everything, except some minor tweak that increases accuracy a little

[calm pulsar]

[kind helm]

can you still buy from another place

or the period is already over for everywhere

[calm pulsar]

preorders are done currently
maybe if luminkey sell loobed's units as in-stock then I might be able

[stone flax]

wdym

[visual ore]

Looks like they change the top housing to hold the pin slide

[frank mica]

i can appreciate the difference in sound between my stock and the various upgraded sound tests online but not between finite switches

[visual ore]

But $2??!?!?!

[calm pulsar]

you linked some 60% board not long ago that you wanted to order, or preordered

[visual ore]

Man that's a first

[kind helm]

120 for switches

[tawdry tree]

They did.

[calm pulsar]

consider geon raw he or gateron jade pros

[stone flax]

neo60cu

[calm pulsar]

yuh thanks

[kind helm]

were you able to get it

[tawdry tree]

From my understanding, these are for CNY and limited.

[frank mica]

why does he have milk dribbling down his cheek

[kind helm]

dont work with venom

[calm pulsar]

since loobed failed me...

[calm pulsar]

fuck

[stone flax]

goes live after cny

[visual ore]

Limited Switches

[stone flax]

so februarish

[visual ore]

You got to be joking me

[tawdry tree]

Rare switches bro

[stone flax]

hawt

[frank mica]

whats the factory lubing like compared to lekker v2's?

[calm pulsar]

sex

[kind helm]

i dig the way they do the connection to the daughter board as well

probably the future

[stone flax]

pogo pins?

[calm pulsar]

they are all fine tbh
could don with spring lubing

[glacial wind]

the real question is what is the difference between the green and white version, because they both are listed as pom switches

[visual ore]

Wait hold on....

[stone flax]

dont last long but they make ball catch so easy

[visual ore]

These are tactical switches?

[stone flax]

More ttc slop

2 dollars?

[visual ore]

I'm not crazy right?

[frank mica]

this looks obvious to me

[visual ore]

That's a tactile bump right there

[calm pulsar]

mx switch

this one

[tawdry tree]

The non magnetic ones.

[visual ore]

AHHH

[frank mica]

the difference is clear and the other is not

[stone flax]

I see a leaf

that aint he

[visual ore]

Yeah I see it too now

[glacial wind]

best i can guess is maybe top housing material is difference but both use pom stem, but can't tell if and what material change it is

[kind helm]

looks hella convenient though and honestly cleaner than cable

[stone flax]

i can dissasemble and switch mounts on my neo in 40 secs

very braindead easy

👅

[visual ore]

$1 dollar is reaching it but $2 is crazy to me

That's a jump

[stone flax]

ITS MORE STABLER

MORE PLASTICKY

MORE TTC

[tawdry tree]

The top housing rails are interesting.

Apart from the cost, they’re unique and worth to try out.

[glacial wind]

the only gain over previous ttc seems to be the stability improvement, although i'm questioning what stability improvement we need when the rgb/pom are already 0.01 capable

[tawdry tree]

It’s funny they’re starting to put serial numbers on their switches as well. 😭

[visual ore]

That's the part that got me lol

Each switch now has a serial number

[stone flax]

price tag warrants improvements

Youd think the price would warrant a better sound or feel but nah lets just schizo into oblivion

[visual ore]

I wonder if you can claim warranty per switch

[glacial wind]

i assume the serial number thing is gimmick of the cny edition

[tawdry tree]

Limited edition bro

you have to be able to verify exactly which switch you have!

[kind helm]

some interesting colors

[glacial wind]

i love that they give 282030 pages of talk on what the switches do and zero just page telling you the actual materials for each part

all it has for materials is some blurb letting you know they use pom somewhere

[visual ore]

I'm still wondering about the whole swapping bottom pin feature

I want to know if this actually does anything

[tawdry tree]

All you need is a lego crowbar to take them apart. 🥰

[fluid ravine]

Oo candy

[tawdry tree]

Affects top out and bottom out sound

[fluid ravine]

[tawdry tree]

It should*

[reef oar]

i guess they're just trying every variable

[glacial wind]

that's on current ttc switches already and they never released the other stem parts for sale lol

[reef oar]

because at one point the rng blesses you with a god combination

[visual ore]

What is it by default?

[visual ore]

That's exactly what I mean lol

[tawdry tree]

The logic of it is pretty farfetched IMO, it doesn’t make sense.

[visual ore]

It's like is it more expensive because we are getting the swappable stuff now?

[tawdry tree]

Stem swap > whatever that is.

[tawdry tree]

More expensive because it’ll be sold.

[cyan lark]

Tactile TTC HE? Pinch me

[tawdry tree]

I wish.

[visual ore]

Oh wait

[cyan lark]

Must've skimmed bad 😦

[visual ore]

Unless they want you to buy different switches

And manually swap them xD

Color seems correct

So Blue and Green are PC

[tawdry tree]

Like they are swappable, but the effect the “stem” part alone has is very little. So it doesn’t make sense to swap just the bottoms, you’d swap the whole stem.

It could’ve just been one piece.

Like they did with Uranuses.

[cyan lark]

Last night

[visual ore]

Oh wait.... get ready

It's a swappable swappable

Yeah I think this is a bit much

[stone flax]

Fake

This is never happening

TTC KOFP
King of Failed Promises

[visual ore]

I agree

[tawdry tree]

You can hear this working* but it’s too inconsistent which sucks.

[visual ore]

Not sure about the whole swapping thing but the switches are nice to use at least

[tawdry tree]

Potential though.

[visual ore]

Not $2 worth to use though

[stone flax]

people will rationalize it

doesnt matter

$5 ttc when

its more stabler ☝️🤓

[tawdry tree]

I’m guessing this is gonna be the new design of KoMs going forward.

[sacred elm]

wait is it actually 2$

[visual ore]

This time we got 4 rails!

[tawdry tree]

TTCs more expensieve than gold by weight when??

[tawdry tree]

16/32usd

33*

[sacred elm]

NAAAAAAAAH

[stone flax]

Oh so its not $2

Lowkey cheap

[tawdry tree]

you don’t understand bro

in a year, they’ll sell for $5 per

[fluid ravine]

[tawdry tree]

invest now

[visual ore]

To be fair

The snake and serial number is cool?

[kind helm]

test pack

for collection?

[calm pulsar]

nah man the stem swap bs is so stupid

[sacred elm]

well if they have jade pro sound im sold 🤓 ☝️

[visual ore]

Artisian Switches?

[frank mica]

for 2$ a switch?

[visual ore]

Oh god why did I type that

[frank mica]

[visual ore]

My mouth is puking

[sacred elm]

🥶

[tawdry tree]

Selling sealed TTC KOM POM POK PC PBT CNY LIMITED EDITION switches $20 each!!

[fluid ravine]

My fingers would be

[fluid ravine]

It is..

[kind helm]

creamson be creaming out of his fingers

[fluid ravine]

Ok-

[tropic urchin]

What are these new TTCs 😭

[sacred elm]

[tropic urchin]

Making Jade maxes look like RAWs with these prices

[sacred elm]

get ttc new switches for 2.06$/1pc

if you want extra fancy stuff, you have to buy them too

[cyan lark]

https://tenor.com/view/credit-card-smacking-credit-card-on-table-gif-21340324

[tawdry tree]

Sold out already 👍

[sacred elm]

not surprised

[visual ore]

[cyan lark]

So what is the deal w/ these silly expensive TTCs?

[tawdry tree]

They’re for CNY and have a new design.

[cyan lark]

Just better tolerances and super heavy springs?

[visual ore]

CNY exclusive

[sacred elm]

stabler

[calm pulsar]

none of that

[visual ore]

Different top housing

[cyan lark]

Oh I was looking at that snake image that showed 100/90g

[visual ore]

That's about it

[cyan lark]

👍 Thanks

[tawdry tree]

magnet tolerances are improved as well.

don’t think that matters much though

[calm pulsar]

at this point it's paying for proof of concept

not worth it

[cyan lark]

I needs have 0.00001% wobbles

[visual ore]

If it was tactile

[tawdry tree]

you’re paying for bragging rights

[visual ore]

I would have consider getting a few to try tbh

[brittle grail]

you are a life saver man i love you

[tawdry tree]

I saved a life guys wow!

[tawdry tree]

Yw bro!

[glacial wind]

okay i had to dig through press releases to confirm

the clear top is PC and the other is full pom

so both are 'pom' but one is full pom and one uses pc clear top cover

that's the difference between the 2 new snake magnetos

[tawdry tree]

There are four new ones right?

RGB too

[glacial wind]

well 2 new ones but i think 2 limited edition so 4 if you counted the limited edition

[brittle grail]

Also going off the item you recommended I checked all 7 hardware stores in town and found an option that wont make me order 40000 pieces or a 40m by 40m sheet of the stuff

[tawdry tree]

Ohhhhhh

[cyan lark]

The ones I picked up on amazon did include like 200x but it also cost I think $10. If you had a electronics hobby shop nearby you could probably get one for a nickel, but those are becoming harder to come by 😦

[glacial wind]

you can buy the OG edition for more money just to have a serial number vs. the regular version is what it looks like lol

[tawdry tree]

I see now, so basically 6 new ones, two of which limited and for CNY (those are the ones with a serial number on them) and the four other ones (two of which are the same as the CNY ones just without serial).

[tawdry tree]

Yeah

[visual ore]

How much do the regular ones cost?

[tawdry tree]

I thought they were all limited

cause of the snake

Like 20% less

[glacial wind]

yeah and some of them are mx, so basically there's just 2 new switches (for magnetic), but each version has a special version with serial number for collectors or whatever

[jaunty latch]

having a very weird issue with my kb, in game, some keys just stop working. most recently my C, V & H. But as soon as i press my windows key and type into the search theyre working. this isnt game specific, so far i have noticed it on Warframe, Marvel rivals and rocketleague. anyone have any ideas at all?

[brittle grail]

Yeah sadly they arent aviable in my country so it would cost me a lot more to redirect the package but hey at least I did get lucky, Personally I think wooting could've easily saved people the headaches and just incude one or even 2 of them with the friction fit but oh well

Now im just waiting for my buddy to gather all the tools and make my low profile full brass case

[cyan lark]

I agree it would have been swell of them to include a few pads of varying sizes.

[tawdry tree]

4 unique new magnetic switches (without serial).

Green, Grey, Blue and Transparent

Also:

😂😂

[tawdry tree]

That’s good if it’s not more expensive.

[glacial wind]

the other ones are mx

[tawdry tree]

nono, magnetic ones too

scroll a bit down in the listing

I don’t know what lifetime limited warranty means though.

On the CNY ones

[glacial wind]

oh weird, they didn't have any pages with info on the bottom ones

[tawdry tree]

Yeah they aren’t listed yet

maybe soon

Not sure why they call both “RGB edition”

PC bottom housing ig

[glacial wind]

probably just old non pom magneto but with new upper housing rail change

[tawdry tree]

💀

[tawdry tree]

maybe

[glacial wind]

from best i can tell the serial number og stuff is only sold in small quantity collector edition sample packs

[tawdry tree]

yeah

[glacial wind]

basically just for collectors

[tawdry tree]

Were they already for sale and actually sold out that quickly

or they didn’t go on sale yet?

[glacial wind]

yeah they already had the sale

[tawdry tree]

gg

[glacial wind]

it's taken off store already, so first batch is gone

[orchid folio]

i bought qwerty as a german iso user, hopefully i can actually touch type

[ionic breach]

[orchid folio]

they do look good tho

thought i could swap some of the extra keys out but forgot key profile is a thing

[stone flax]

[orchid folio]

like i wanted to swap z and y but i got ocd from the profile being wrong

[orchid folio]

what color should i put the rgb on now

i actually like this more than the shine through legends but on 100% it looks overpowering no matter what color i put

[tawdry tree]

red obviously

[orchid folio]

255,0,0 red is like more red than the legends

:D

[tawdry tree]

I put mine not very bright

and with uh

I don’t remember the effects name

AoE

and put that on bright

looks sick imo

[orchid folio]

aoe is pretty

thats actually nice setting ill use this for a while :D

next thing i need to get is a black red strap

in a few days the alumaze arrives with new strap, i guess ill see how that one ends up looking

[brittle grail]

Personally I put my strap on the keychain, but the holder for the strap gave me an idea

I might one day customize a numpad and just use the strap to secure it to the left of my keyboard beacause numpad on the right at least in my opinion is impractical

[orchid folio]

i actually ended up having to use my old full size board the other day

cause i wanted to play gtav and the plane / heli controls are on numpad

so for me it had to be right side

how do you put that on your keychain tho

i wouldnt want that hole on the left to just be empty

anyone ever made a strap themselves? since its 2.5cm wide can i just get any strap and put it on there somehow? :D

i think if i go with a printed one itd look cheap

[tawdry tree]

Yeah, a few.

Or they had one made rather than make it themselves.

The dimensions are in #🪛│modding_faq if you haven’t seen them already.

[orchid folio]

thats amazing

ty

now im bursting with anticipation for the case tho

i gotta make a red accent piece for it somehow

[tawdry tree]

👍

Or its clone:

[vernal jay]

that looks dope wtf

and expensive holy moly

[fluid ravine]

Pun intended?

[vernal jay]

LOL

[wicked hull]

Can anyone here recommend a low profile HE switch that fits the 60HE?

If such a thing exists ...

[uneven cradle]

It does not currently at least

[wicked hull]

https://nuphy.com/collections/switches/products/gateron-low-profile-magnetic-jade-switches As someone who knows nothing about this, for now, why would something like this not work? I'm not sure what to look for

[uneven cradle]

These require a different PCB not supported on any HE PCB aside from Nuphys

[wicked hull]

Thanks!

[stone flax]

melgeeks might

[lean peak]

Does lube brand/type/etc matter, or is it just overpriced vaseline or so?

[flat cobalt]

The holy is so ugly lol

To me

[orchid folio]

can keycaps make a difference in how wobbly a board feels

i swear now when i strafe its like i can feel my a and d key wobble

and i never noticed with wooting keycaps

[uneven cradle]

that's mainly the switches that cause that feeling

[orchid folio]

maybe its time to try the v2 lekkers

[tawdry tree]

I don’t mind it

It has its place

[uneven cradle]

when did you buy your keyboard? If you recently got it the switches will basically have the same tolerences as lekker v2s

[tawdry tree]

A taller profile can, yes. Woot’s stock keycaps are OEM which is already pretty tall so it might be placebo.

[orchid folio]

last year august i placed the order

[cyan lark]

I imagine a wider keycap top would also expose more wobble since you're increasing your leverage when pressing the outer edge of the cap.

[uneven cradle]

then yeah swapping out the switches should resolve the wobble

[orchid folio]

i never changed switches before, what will change when i use other switches?

will they perform with the same accuracy

[cyan lark]

Changes in sound, stability/wobble, feel, travel distance, and spring weight.

[marsh saffron]

Absolutely nothing performance wise is affected

[orchid folio]

i see

[pine anchor]

what r the best switches based on performance

[tropic urchin]

Entirely personal preference, depending on your budget and what you’re looking for specifically. As a starting point, if you like clacky switches try RAWs/Jade Pros, if you like a quieter experience definitely Lekker V2s.

[winter jungle]

does this count as keyboard modding?

[sacred elm]

Not entirely true, the difference isnt noticeable but with stable switches you get less deadzone, so acktwually you get better performance 🤓 ☝️

[high sphinx]

Np

[stone flax]

lol imagine needing to force urself into using plasticky koms just for better deadzones

venom could never

[sacred elm]

benom

[chilly mural]

gettem

[icy dew]

POV you accidentally bought an 80HE foam modding kit

But you already built your keyboard and won't use anything 💀

I mainly bought it to get some foam to do a PE mod, but I ended up just using normal PE foam. The stuff in here feels high quality, but idk if it would give me the sound I want

[gleaming dagger]

Jojojo this is a special question, i wanna build a hatsune miku wooting 60he for my girlfriend, are there any keycaps and aluminum cases wich matches thr color scheme (:

[harsh dove]

I’ll take it

[glossy pagoda]

What was the packaging like for this?

[stone flax]

[icy dew]

I'm thinking about it. My keyboard isn't fully built yet, everything is together I just need the key caps. So I could open it up and still change some stuff. But what would I even do? I don't think I could put this foam anywhere

Like maybe I could replace the silicone mold with this foam material one

Would that make the sound more quiet? More thocky? More clicky?

[stone flax]

tsktsktsk

[stone flax]

silicone runs higher pitched than thick poron

[icy dew]

See I have no idea and idk if it's worth opening it all back up, closing it back together, and trying it out

[icy dew]

So if I switched the silicone out with this foam, you think it would be a deeper sound?

[marsh saffron]

Yes

[glossy pagoda]

Interesting, thanks

[stone flax]

ya

[icy dew]

The thing I want to avoid is it becoming like silent. U sure this would make it deeper and not just like make it quieter

[little glen]

no better way to find out than to just give it a try

[flat cobalt]

I bought it just for this and the aluminum plate to check it out

[orchid folio]

when your grey keycap bleeds rgb

i literally drew over it with black permanent marker XD

[icy dew]

What is the sound difference between silicone and poron foam in your experience?

[cyan lark]

Foam is more muffled/dampened

[flat cobalt]

what plate do you use?

[hollow bear]

random question does anyone here use side print shine through caps?

[cyan lark]

I had cf on the foam plate pad until last night

Went back to silicone

[stone flax]

not really recommended when the led’s are northfacing tbf

[flat cobalt]

Hmmm maybe it's gonna be perfect for me then

[hollow bear]

True, my friend has a South facing board and we're having an argument rn about what caps look good on em

I've always been more of a standard shine through guy or no shine through and get a themed set of caps

but he hates themed sets

[icy dew]

O rly? Dang alr, I think I'll stick with silicone then

I heard it's a more secure mounting style too

[flat cobalt]

@sacred elm finally put a little piece of foam in my spacebar

clack is destroyed

https://tenor.com/view/orange-cat-laughing-gif-13031147940704744720

[night atlas]

So I gasket mounted my wooting into the tofu60 acryllic...

idfk how to take the pcb out without breaking shit... idk why I didn't think of this earlier... any tips?

on the plus side... it sounds nice 🥲 lol

[sacred elm]

👀

[celest violet]

Anyone got a good looking red and white keycap set?

[polar girder]

You did what?

Like the friction fit pad or what

[tiny plume]

Are the stabs on the wooting good enough that I don't need to relube them?

Also, should I be putting the center stand off if I'm putting the wooting inside the tofu 60? I already put the spacebar standoff

[night atlas]

i got an O ring to gasket mount the PCB into my case haha

it's just really difficult to get out, it's SUPER snug

[polar girder]

Oh gotcha

Yeah that’s not quite what gasket mount means technically but I got you

Take the space bar keycap off

Use gravity and the space bar slit on the plate to kind of tug it out

That’s what I did before

Just be gentle

Gravity is your friend

[stone flax]

No

[sacred elm]

no

[stark osprey]

Had the same prob with my case on the 60HE, even with the size small O-ring. Wound up using the friction fit pad from Wooting, and that was a better solution for me.

[night atlas]

oooo my bad, shoulda been clearer on that, thank you!

[night atlas]

that makes sense, i just didn't like the sound of silicon plate foam so that was my compromise haha

[night atlas]

okay, mine's like REALLY snug, will this work? like I squeezed in the remaining O ring w/tweezers to get t all in

[barren wasp]

Best long pole stabs for jade pros?

[polar girder]

I think so

Just kind of wiggle and pull and gently shake and be careful not ish

Make sure it’s supported and doesn’t just fall

[reef oar]

do you guys think a 205 105 concoction is something that isn't braindead

for stabs

i'm feeling experimental

[gilded comet]

🫎

[inland jetty]

@tropic urchin

Wanna hear some ear gRape? Og koms with a Kom pom space bar.

Pitch was higher when I swapped Kom pom spacebar to OG Kom.

[tropic urchin]

If I’m not wearing my IEMs my shit sounds like 88% of that 🤣🤣

That strobe is gonna give me a seizure tho

[sacred elm]

tf is that spacebar 💀

wait is this cf plate

[tropic urchin]

Nah no way it’s CF

CF would make that shit sound like you’re throwing your iPhone at a chalkboard

[reef oar]

almost woke my grandma up in her grave

[harsh dove]

why is that sound test so spasm

[inland jetty]

its part of the experience, its just as agressive as the sound LMAO

[inland jetty]

mind you, this is tray mounted, no cf plate, crazy how tray mount can sound so damn loud. im wondering if any of the plates available for the 60he can make this even louder. It will be interesting to see this same build on my 80he once my mineral wool and the abs keycaps arrive. Im waiting on those to redo my 80he

[tropic urchin]

Steel

Go for fucking Jupiter

[cyan lark]

Yeah so it’s not far from cf right?

[tropic urchin]

🤣🤣🤣

[cyan lark]

Harder even? I dunno

[inland jetty]

yeah, everything about it is extremely agressive, the rgb effect wasnt even intended, it was the default typing profile rgb but it goes so well with the agressive sound

[tropic urchin]

Steel is 8/8, cf is 7/8 for stiffness

Steel is the final boss

[inland jetty]

signed sealed and delivered 😂

[tropic urchin]

I respect the degeneracy tho musicah

Know what you want even if it will hurt others might need some earplugs for guests tho 🤣🤣

[inland jetty]

brother idk what to say, it started as a joke but i actually enjoy the sound. i just played marvel rivals with it and god, its amazing..... probably not for my neighbors tho.

[tropic urchin]

That’s how it all starts

[reef oar]

marvel sleepers

[inland jetty]

it all fucking started with a cf plate yall were joking about lmfao

for the 80he lmfao

[tropic urchin]

Oh I was never joking lmao

[inland jetty]

and i bought it and jesus christ brother, i dropped the whole thocc bullshit right then and there

[tropic urchin]

I got a CF mouse first and was like “aight this is legit” and then discovered CF plate after hating PC and was like “aight bet”

[harsh dove]

Embrace clack, forget thocc

[inland jetty]

this is on the wooting website right?

[tropic urchin]

Steel should be available I think, it’s the default plate for 60HE or was

[reef oar]

i might need to add "CF Jade Pro Ambassador #2" after i relube my switches and put it all back together

[tropic urchin]

Hehe

Join the church bröther

[reef oar]

my cf plate arrived but i don't wanna pull the switches twice

[inland jetty]

i understand now 😯

[tropic urchin]

Tuff

I did it once on the fr4 after an hour

[cyan lark]

Who was joking about cf? Mine’s cuddled up with my pros

[tropic urchin]

Wasn’t super fun

I was the first to take the plunge and started a pc plate rebellion

[reef oar]

i feel like we could create some really good propaganda here

it's like an echo chamber

[cyan lark]

I am back to pc for my koms though. Kinda evens them out a bit

[tropic urchin]

It used to be a lot worse @reef oar

Now it’s like a rivalry vs everyone on RAWs in here

[reef oar]

it actually is

[tropic urchin]

Shafie started the mass enlightenment

Long live our cult leader @sacred elm

[reef oar]

jade proers. arm up.

[cyan lark]

Prophet

[inland jetty]

no way

[cyan lark]

I figured you were going CF for the 80

[inland jetty]

this is for the 60

[reef oar]

50 for a plate is crazy

[cyan lark]

Yeah that is too much

[reef oar]

i got the kbdfans one, it's like 20

that's super acceptable

[inland jetty]

good catch, i didnt notice the price not updating as you put your choices, i literally just thought $30

it would actually end up being more

on smkeyboards, its the same as well. $50 but i guess theyre the only guys who does cf for 60he cuz theyre the only website tha tpopped up

https://kbdfans.com/products/compatible-accessories-for-wooting-60he?variant=41579926651019 how about this? cant find alu for some reason

[reef oar]

i wonder how nylon feels

[cyan lark]

Lot of flex cuts

[reef oar]

that's the one i bought, just on aliexpress instead so i didn't have to pay 10mil shipping

it has less flexcuts than that in person

[inland jetty]

that is hilarious, let me actually compare

[reef oar]

i guess cf has less flexcuts than fr4

https://a.aliexpress.com/_EJTpgzA

[inland jetty]

thank you <3. You guys will regret this

[sacred elm]

[reef oar]

another one converted

the ponzi scheme continues

i mean pyramid scheme

[stone flax]

yapyapyap

another trend

cf cf cf

[inland jetty]

holy shit, never bought from kbd fans and never will lmfao

[reef oar]

yeah shipping is crazy

[inland jetty]

you know, $20 for economy shipping is insane

[reef oar]

not even economy atp

just slow

[inland jetty]

yeah, thats crazy work, im not paying that xD. Im going straight to the manufacturer.

[reef oar]

fuck it, i'm weaving the carbon fibers myself

[inland jetty]

we got a volunteer here guys, hes gonna make the whole church, one. line up ladies

[reef oar]

F1 grade carbon fiber

all weaved within my bedroom

[cyan lark]

Sounds like knitting for uber-geeks

[sacred elm]

https://aliexpress.us/item/1005006050178592.html?

just get from keyboard fun store

no flex cuts

[reef oar]

think he wants cf

[visual ore]

What is wrong with Flex Cuts

[reef oar]

https://a.aliexpress.com/_Ey6Wgeu

i guess there's this

[visual ore]

Also Keyboard Fun Store should have CF

[reef oar]

cf non flex cut option

[visual ore]

Oh wait I'm dumb

[sacred elm]

😳erm, i thought they had cf plate for 60he

weird

they sell for 80he

[stone flax]

makes sound thinner

[visual ore]

Ahh

[harsh dove]

https://tenor.com/view/clive-handforth-lbp-lbp2-littlebigplanet-littlebigplanet2-gif-2029825097039243787

[sacred elm]

mj gif frfr

[stone flax]

https://tenor.com/view/boom-cat-gif-12892056996301838631

[glad hull]

I heard silis is good for dampening sound. Is this true?

[flat cobalt]

https://tenor.com/view/cat-gif-21574546

[lone mural]

LITTLE BIG PLANET

[kind helm]

rank your subjectively best to worse plates in terms of material?

[fluid ravine]

oh lord what cult we starting now

[mossy river]

do we know what happened to the original switches that were made by huano? is there a way i could get my hands on them?

i know this is an insanely far shot, but it would be really cool

these were both made for wooting as part of the lekker edition wooting two btw

[night atlas]

has anyone had/solved ticking switches? not talking about stabs

hand lubed WS dashes btw

[uneven cradle]

They were prototypes but they were eventually replaced by the Gaterons

Can read more here https://wooting.io/post/we-overcame-the-challenges-lekker-update-5-part-22

In terms of getting your hands on them probably not they are most likely only in the hands of staff in limited quantity since they weren't mass produced

[kind helm]

【25年度生肖轴 | TTC乙巳蛇轴 | 首款生肖磁轴】 https://www.bilibili.com/video/BV1yYcUeBEbb/?share_source=copy_web&vd_source=83f04eac3fd0a04d5c308473e7804ce4

comparison against jade pro at 1:10

[high sphinx]

Next part arrived 😀

[prime orbit]

My Lucifer switches got sent out

[high sphinx]

Oooh u ordered the lucifer switches

[prime orbit]

Ye!

Going for a blackout build

Had some RAW he in there rn

[high sphinx]

Do you have the stoxh switches now the lekkers ?

Oh ok

[prime orbit]

Nah I started with black knight switches -> raw he -> Lucifers

Now I just need to get black stabs

And blank black key caps and it’s done

[high sphinx]

Isnt lucifer kinda a downgrade from rthe raws ?

[prime orbit]

Tech yes but I don’t notice that stuff anyway 💀 I care about performance and it doesn’t mess with that

Plus it sounds cool

[high sphinx]

Yeah and if you go for all black that one is black 😜

Do you have wooting 60he ?

[prime orbit]

Ye module

With redux

Friction fit pad

Brass bar

Lucifers

Blank black key caps

Full build^

[high sphinx]

I am gonna do the same but with the venom pcb

[slate narwhal]

is there any yt sound tests ive never head of these switches

[high sphinx]

Also redux case friction fit

[prime orbit]

Not sure cuz they just came out I’m pretty sure

[high sphinx]

But raw he switches

[prime orbit]

Wwww

I would’ve done that if I knew about it before wooting

Maybe

[prime orbit]

You are doing those?

[slate narwhal]

been looking into switching to aftermarket switches but not sure if even worth

[prime orbit]

What you got rn

Cuz v2 lekkers are honestly really good

If you got OG

I’d say the upgrade is worth

[slate narwhal]

how would i know if i hav og or v2 lol

[prime orbit]

What did you get

Base wooting 60he

80he

And when

[slate narwhal]

60he sometime last year

[prime orbit]

Probably OG then

[high sphinx]

Yup tofu redux with brass weight friction fit pad i also ordered silicone caps to put over the standoffs off the case then venom pcb with alu plate geon raw and gmk evil dolch keycaps

[prime orbit]

Are they yellow?

[prime orbit]

Fire build!

[slate narwhal]

jan 2024 - 60he

[high sphinx]

Yeah i am only waiting on my keycaps and the caps to put over the standoffs in the case and i can start my build

[slate narwhal]

so prob og

I got a few of the yellow switches but the og yellow not the v2

[high sphinx]

I wanna see ur build when it is finished tho also look super cool full black

[prime orbit]

Fire bro. Friction fit doesn’t need stand offs no?

[prime orbit]

Ye I gotchu. I got my t99 coming in

Got v3 pro recently

All black ofc

On a wood desk built by myself

not the best tho

[prime orbit]

Ah gotcha. Honestly I’d say the v2 45 ones, raw he, and like uh nah probably those 2

[high sphinx]

No but u know the standoffs that are in the tofu case already ? Well if u put caps on it it will be slightly better like the thing they do with the optimum case there tehy also but little things over the standoffs

[prime orbit]

Unless the Lucifer is good I’ll lyk in a couple of days

[prime orbit]

Ohhhh where are those standoffs at cuz wooting don’t sell them right?

I’ll get them

[slate narwhal]

do keep us posted will prob end up purchasing whatever you recommend

[high sphinx]

They are not really standoffs they are more like caps to put iver them

U can find them on aliexpress or kbdfans

[prime orbit]

I’d take on some other opinions tho cuz I can only recommend what I’ve tried. I’m also not a giga nerd about sound and feel and stuff. Lots of people have way more knowledge than me

[prime orbit]

Ah gotcha

Can’t wait to pay $35 for shipping 😭

[slate narwhal]

That's fair. What made you switch to aftermarket

[high sphinx]

Is it also that much when u order from aliexpress ?

[prime orbit]

I built it from custom. I got the module from the beginning. Black night sounded cool so that’s why I got them first 😭💀

[prime orbit]

True but then I wait 3 weeks sadge

I’ll look around

[high sphinx]

Also you gotta watch out i will tell you why just give me a bit of time to type haha

[prime orbit]

No worries

I’m bored at work

Don’t worry 🙏

[high sphinx]

So i ordered

Those but you see they are round and the wont exactly fit on all standoffs in the tofu case

U have 4 standoffs where u have to put them on

[prime orbit]

Yeah those look like they won’t work

[prime orbit]

Ye

[high sphinx]

Those four they will only work on the top two if u want them to fit on the bottom two you will probably h1ve to try and cut the silicone caps a bit (that is what i gonna try atleast)

[kind helm]

what are those pads on the sides

those came with the tofu?

[prime orbit]

I’m hoping wooting will put them on the website. Like they did with the friction pad

[high sphinx]

The black things ?

[kind helm]

yea

[prime orbit]

Shadow?

[high sphinx]

Yup came with my tofu

[kind helm]

that is nice

[prime orbit]

I must be blind

[kind helm]

that should help with the keys in the corners

[prime orbit]

Wait came with the tofu

[high sphinx]

Yup it was a pain to put them on tho haha

[prime orbit]

Mine didn’t

[slate narwhal]

is there a spreadsheet that shows compatible switches?

[prime orbit]

Ye

One sec

[kind helm]

maybe new, i dont think i have those on mine either

i brought some foam tape seperately and cut pieces for those positions

[high sphinx]

Well i hope the cutting thing i wanna do works fine on the little caps i will let you know if u want ofcourse

[prime orbit]

Well actually any HE switches should work

They have to be HE

[kind helm]

nope

[prime orbit]

Ye lemme know bro!

[kind helm]

some works differently

[high sphinx]

Yeah maybe included now

[high sphinx]

Ok i will 🙂

[prime orbit]

I tried finding the spreadsheet but couldn’t

I have failed

[kind helm]

sno is building a new one i think, modding faq has the old one that hasnt been updated for a while

[prime orbit]

I couldn’t find it

Again I’m super blind rn

Jk

@slate narwhal

There go

[slate narwhal]

tyty

[prime orbit]

New one is being made but this has a lot

[kind helm]

if you are looking for new switches i would just recommend getting geon raw he

high quality at a decent price

[prime orbit]

^

[high sphinx]

Yeah i h1ve geons they good

[prime orbit]

Even the wooting v2 are super good for the price too

The 45s

But yeah geon RAW are the goats rn

If you don’t mind the all white

[kind helm]

all white is better for rgb

[prime orbit]

Shit I’ll sell you mine for cheaper than you would get them for

[high sphinx]

You dont really see it that luch except if u have translucent keycaos ofcourse

[prime orbit]

Yeah true true

[slate narwhal]

no wobble

[prime orbit]

If you get jades

[kind helm]

dual-rail is worrying, many say that dual rail is a bad design

[prime orbit]

The pros are the only worth ones tbh

[slate narwhal]

this right

[high sphinx]

Yes

[prime orbit]

Yup

[proven wadi]

I would have gotten the Geon RaW he switches

[prime orbit]

The Jade pros are top5

It’s alright

Raw he are 1 tho

[weak yew]

Which bottom force do you use? 40 50 60?

[prime orbit]

I went with 50

If I could go back

I’d try 40

Feels good tho on 50

[tawdry tree]

Those aren’t compatible.

[prime orbit]

Think he getting pros

All good

🙏

[prime orbit]

My Lucifers should come in this week

[agile arrow]

anyone know where to get aluminium plate?

[slate narwhal]

ended up getting raw

[prime orbit]

W choice

U gonna love em

What force?

[prime orbit]

Kbdfans

[slate narwhal]

40g I'm all for it being light

[prime orbit]

W

My man

[slate narwhal]

it was an extra $2 for 1 day shipping so hopefully I get it that fast will keep yall posted

lmk how the lucifers go might get those next once i get bored haha

[knotty iron]

I got 50g and 60g

I make too many mistakes with 50g

[prime orbit]

Will do

[prime orbit]

50 feels good to me. 40 seems interesting. 60 seems like too much 😭

[tawdry tree]

On KDBFans but do note that you need to buy the standoff kit separately as well. It’s not included.

[kind helm]

60 has alu plate now?

[tawdry tree]

For a while now but it wasn’t listed as 60HE compatible.

Cam uses it.

[kind helm]

https://kbdfans.com/collections/plate/products/tofu60-redux-plate?variant=42637258784907

pogger

[kind helm]

i remember before it doesn't have the screw holes

maybe they added later

and it works with plate mount stab, so gummy oring friction works with it, double pogger

[tawdry tree]

Could be, I don’t remember.

[tawdry tree]

Bad! Friction pad better!

[kind helm]

80he enjoyer would say that of course

[tawdry tree]

I rather have PCB mount support with friction than plate mount support with gummy.

[kind helm]

already coping L gasket mount

[tawdry tree]

😂

[kind helm]

maybe i should one day try the friction pad, i am actually curious how well it works if i try to cut it off like thackson

but that is janky

but actually i think about it why dont i just buy 461e at that point

[harsh dove]

cause friction fit pad is cheaper and more versatile

just buy two and only cut one

[kind helm]

hows that more versatile

[harsh dove]

cause you can use it in multiple cases , you can't use the 461 silicone gasket pad in different cases

[kind helm]

i just recently brought a plane ticket for 500 and a keyboard for 300, i can't. i gotta stop for like a few months

[harsh dove]

They're like $12 each

[kind helm]

but like why would you even use friction pad on non tray mount case

from my perspective it was a janky solution to get softer mount to begin with

[kind helm]

nah nah nah dont bait me

[high sphinx]

Well i am curious about my friction pad build 🙂

[tropic urchin]

Jade pro cult hehe

Can add CF plate to the cult part too

[kind helm]

raw he + alu >>> jade pro + cf to me

[reef oar]

it's 2v1 rn buddy. this is our block

[kind helm]

more like 1v0 since you havent try that i assume

[reef oar]

[kind helm]

curious what mr cam prefers though

[reef oar]

you've tried both?

[kind helm]

i have jade pro + cf on my salvation and raw + alu on my tofu 2.0

[reef oar]

which one did you build most recently

[tropic urchin]

Wake me up when aluminum is added to the keyboard fun store

[kind helm]

raw he but i swap whenever i feel like

[tropic urchin]

Until then aluminum plate is cancelled until further notice

[kind helm]

for me, cf is too... aggressive in a way, i think it would work better on a softer mount though

[tropic urchin]

It definitely is rather aggressive, but it’s a tamed aggression vs what I figure steel would make very overkill

[kind helm]

i am not touching a board with steel plate

alu is like "hi i am here", cf is more like "hi i am in your face"

[tropic urchin]

I’ve never tried it, but prob for the best if CF is borderline too much

And steel plate is flipping you off in the background trying to steal your car

[kind helm]

probably the most stupid decision i made when it comes to keyboard is buying a pre built wooting

[tropic urchin]

I only got module so I wouldn’t get lekkers kekw

[kind helm]

imagine if i chill in the discord for a few days first then i couldve got a frog + wooting module like mr. arc. i joined i think oct or something of 23

[calm pulsar]

I personally only joined after I ordered my module, and before that I only modded my stock og 60he, with a redux case and jades😄
joined to see shipping updates and stayed for the modding channel

[kind helm]

i came in to see what mods and cases people were using for it so maybe i can copy some stuff :3 then i saw the switch tape thing

[reef oar]

i was gonna lube my switches today but fuck it

that's a job for tomorrow me

[kind helm]

"hell nah i just gonna leave my wooting unused for a bit"

[tropic urchin]

Until it’s the day after

https://tenor.com/view/dwight-the-office-countdown-persuade-convince-gif-25275628

[reef oar]

that's for tomorrow me to decide

[kind helm]

you dont get to go to sleep until you finish your keyboard and fix every problem on it

[tropic urchin]

https://tenor.com/view/chihuahua-cane-recensionivere-cosa-what-gif-7417567602944477819

[kind helm]

tune them stabs, test those mods, make sure everything is good then you can crash out

[reef oar]

sounds like effort present me doesn't need

i need coffee

[silver nest]

Geon RAW HE
tape mod
tofu redux with brass weight
pbtfans wob keycaps

syringe lubed stabs

friction fit pad

valid build?

[reef oar]

valid

those keycaps look so rough

[silver nest]

yeah i had an older 60he that i gave to my brother

i’ve used the keycaps for about a year and a half

[sacred elm]

😳

[sacred elm]

https://x.com/morrtex/status/1878954050781372736?s=46

MorTex (@MorrTex) on X

Disappointed by Wooting Lekker L45 V2 switches

Twitter · Jan 13, 2025, 11:55 PM

based

[icy dew]

What is a friction fit pad?

[austere creek]

i mean given that we dont recommend to remove them the way they tried anyway

[tropic urchin]

Hopefully Gateron gave him a bottle of whiskey for those 2 containers 😭

[sacred elm]

L hejin

[austere creek]

basically since lekker was introduced the recommendation was to lever them out not pull straight up

and not by levering towards you but basically pushing the top of the puller away from you

[sacred elm]

that doesnt actually matter, switch is just stuck in the plate because of poop design

[austere creek]

i mean my v2s sit slightly tighter than my v1s. cant say i have a lot more trouble than with my v1s removing them from the plate

[sacred elm]

Havent tried v1s in my 80, but I remember it was pretty easy to pull v1s from 60he

compared to jade/jade pros, pulling lekkers and raws is just torture

[austere creek]

havent tried jades only got lekkers in various versions and raws

[ionic breach]

i wonder who manus the owlabs switch

[austere creek]

and the are all relatively easy to remove imo. the v1s easier, the raws slightly harder, v1.5 around the same as raws and v2 slightler harder than raws

but the whole shaking from the strength i need to apply like in their vid i havent experienced at all

[sacred elm]

bro shits on lekkers and has jade maxes in a keyboard

[austere creek]

the one thing i am certian on though is i personally dont like our plastic puller as much as the metal puller we have in the lube set

[sacred elm]

🤷‍♂️ maybe my plate is tighter because my right hand was all red pulling both raws and lekkers v2s, raws were worse. pulling jade pros is very easy

[ionic breach]

wait the owlabs are having their own custom switch right?

or am i halluciating again

[sacred elm]

Yea, that plastic puller is not it

[ionic breach]

this one

[orchid folio]

im at work and watched on mute cause im curious, my mind immediatly went to "guy explaining in front of whiteboard meme" from the way he was moving x)

[sacred elm]

its probably hejin

[ionic breach]

what material is that tho

[sacred elm]

no clue

its probably similar to raws

[orchid folio]

does that mean wiggle them out? i will soon have to replace my switches my intution was kinda like if you dont pull it straight you might damage something of the internals below (never replaced switches)

[sacred elm]

no you cant damage anything below

you might break the clips of your switch

thats about it

you have to wiggle it and then pull