🔧│keyboard_modding

[tropic urchin]

[glacial wind]

It’s a pity all the sales ran out

[strange bloom]

cannot find any jades pro raw

[glacial wind]

Think next big sale for aliexpress isn’t until Chinese new year I’d guess

it’s going to be hard to ever beat the $24 for 90 jade pros though

[strange bloom]

any shops recommendations from AE?

[tropic urchin]

im still amazed at that finesse

[strange bloom]

whaaaaaaaaaaaaaat

when and where was that?

why life is so unfair?

[visual ore]

Where what

[chilly mural]

almost as much as lucifer lmao

[glacial wind]

It was only during Black Friday sales by stacking up what was Black Friday coupon + coin discount + store discount + store coupon lmao

[strange bloom]

LOL

[calm pulsar]

damn was this recently?

[glacial wind]

and also because keypro had new item discount on jade pro at same time

[strange bloom]

too much work, prefer to pay more

[glacial wind]

Yeah keypro suddenly added new switches to their Ali store right at Black Friday

So timing just happened to be insane

[chilly mural]

cosmic alignment type of shit

[glacial wind]

Lemme see where that screenshot was

[strange bloom]

I'm sure I checked during BF for any discounts about this shit and found nothing, why, whyyyyyyyyyyyyyy

[glacial wind]

Ah it’s actually more like $22 now because Korean won dropped lmao

[tropic urchin]

there were some jade pro discounts on black friday which is when I copped mine

[strange bloom]

maybe I exaggerated a little

[glacial wind]

I actually just got around to hand lubing and oiling all their springs today

Honestly the best tip for aliexpress outside of the crazy sales is just use the aliexpress app and check in daily to get free coins

You automatically get like 5-10% off as a start because the coin store puts coin discounts there on whatever you’ve been browsing recently

so you already save a few dollars on everything just from the freebie coin discount

[strange bloom]

all that to get at least 2-3 weeks delivery

[glacial wind]

yeah the best way to deal with Ali delivery is just forget you ordered it then it’ll show up 2-3 weeks later lol

[full mauve]

Do I need to use this screw hole or can I leave it?

[strange bloom]

hahahaha that's right

[strange bloom]

you can leave it

[glacial wind]

otherwise you’ll check their tracking and see it went through 10 different Chinese cities in a national tour

[strange bloom]

nah, I agree it's nice to forget about the orders you made, when you hear your ringbell it's like "not here, I ordered nothing..."

and when you open it, it's like when you find a 50 bill on a jacket pocket

[glacial wind]

Ttc switches are so ungodly expensive outside of the big sales though I swear

I saw they’re back to like $1.10-1.20 a switch for those rgb/poms now

[strange bloom]

on keypro AE

[glacial wind]

Yeah the keypro early item sale ended pretty quick

[inner wren]

Is the v2 lekker45 good?

[glacial wind]

I think jabberwock and a few others managed to snag it while they still had the ‘new item’ sale on

[glacial wind]

they’re okay. Not the best but not the worst

[inner wren]

Good to hear because ive ordered them

I liked the sound so i ordered them

[strange bloom]

I'm on KBD with tofu60 redux, weight bar and a beautiful cleaning brush on my cart, is there anything else you would add to improve sound/quality? I have the 60HE, not HE+

[glacial wind]

rest would be preference really

Things like space bar foam for some is nice depending on the switches

[inner wren]

What do i need to make my wooting thocky

[glacial wind]

Fasting and prayer

Because you basically need a miracle since thock doesn’t exist in the same way custom keyboard folks are talking about it

Need someone to invent an entire new switch design for that

[inner wren]

Ohh alright thanks

So impossible?

[strange bloom]

also HIIT

[inner wren]

[glacial wind]

Yeah basically impossible. It’s why everyone here with ‘clean’ builds are all clacky sound builds

all the popular clean switches are clack city

[inner wren]

Okay thank you

[strange bloom]

wait, so jades pro sounds are not kind of thock?

at least a little

i'm sad now

[inner wren]

The time for my order to arrive keeps getting longer lol

[glacial wind]

Nah they’d be technically a clacky build

[strange bloom]

OMG wanna die now

[inner wren]

Last time i looked it was 30th December -6th January now its between the 1-8th January

[analog pasture]

anyone know the difference between the jade maxes and pros

they're the same price

[strange bloom]

it's a Christmas miracle

[glacial wind]

Don’t worry jade pro sound is super clean anyway so I wouldn’t feel bad about it

[analog pasture]

and as far as I can tell the only difference is rgb

[strange bloom]

not me, maybe @stone flax for sure

[glacial wind]

Jade max is a big no. Friction issues

[analog pasture]

oh ty

[inner wren]

What does it mean when the order is ready to pack or something i forgot

[glacial wind]

We have people in the server who literally had to refund $100+ of jade maxes lol

[analog pasture]

i think it means its at there warehouse but they haven't packed it yet

i guess

[tropic urchin]

Jade Pros are what you want

[inner wren]

Oh alright

[strange bloom]

says the "Jade Pro Ambassador"

[tropic urchin]

not sponsored, but a believer in the church 🙏

[tropic urchin]

I also got the jade maxes and they were mid tier at best for smoothness

id rather have bought the TTCs for their price and I hate how they sound 💀

[strange bloom]

i know i know

[glacial wind]

Let the power of ttc clack empower you

Your neighbours can all enjoy the loud clack on your cf plate

[strange bloom]

I'd like to find the mfs who recommended here to me the black knights (joke)

[tropic urchin]

I got something close with CF plate idk if i want something more xD

[strange bloom]

what "ttc" means? it's the second time I read it from you and i'm lost

[glacial wind]

It’s the company

Ttc make ttc magneto, magneto pom, magneto rgb switches and more

[strange bloom]

ah ok ok

[glacial wind]

They really are absurdly loud compared to every other switch though lol

[tropic urchin]

have you tried lubing them sno or are you just running stock like a fiend

[glacial wind]

I did a video earlier today comparing lucifer vs jade pro vs ttc switches

Try to guess which is ttc magneto pom lol

[glacial wind]

All hand lubed

[barren wasp]

sounds the same to me

[glacial wind]

I hand lube everything, even if I don’t use it - I think for the sound and feel tests it’s only fair if all the switches are hand lubed

[strange bloom]

ahhahahahha

[tropic urchin]

the TTC stock is absurdly sharp, you need to hear it xD

its like a right of passage

[glacial wind]

I even hand lubed all 90 Jade pros I have sitting in a bottle on my shelf lol

[inner wren]

How much have u spent on lube then

[barren wasp]

is it worth hand lubing

[glacial wind]

Honestly not really unless you’re particular

[barren wasp]

whats your favorite HE switch

[strange bloom]

man, when you quick press the three key it sounds like a horse running, am i right? i am

[glacial wind]

Ttc magneto pom, but I have no issues with the loudness so it’s fine for me

[analog mulch]

since you have experience 🤣 what would you say are the quieter of the HE switches besides the phoenix silent?

[barren wasp]

its close

[tropic urchin]

mine sounded better after hand lubing

[barren wasp]

does it feel better than jade pros

[strange bloom]

oh sir, I see you have the goxlr and streamdeck like me, my respects @glacial wind

[glacial wind]

No, Jade pros/raw he are still going to feel better than any box stem

[glacial wind]

Just lekker v2 honestly. There’s not much out there that’s quiet besides maybe the fake silent gateron genty silent that isn’t really silent

[barren wasp]

is there a barebones kit for 60% that is compatible with wooting? i want to be able to add more than 1 layer of bottom foam but the stock plastic case isnt thick enough

[glacial wind]

what do you mean by a barebones kit?

[barren wasp]

i see on amazon a ton of barebone keyboard kits that come with a ton of stock foam and a new plate and i was thinking of just replacing their stock module with my wooting one

[strange bloom]

and why more than 1 layer? not so much space

[strange bloom]

barebone you mean case? or the plate? I guess the second

[barren wasp]

case, plate, and foam

[strange bloom]

hum

[glacial wind]

There’s probably plenty if you mean cases, but I’d post here about it before you pick one

You don’t really need plate and foam though for those kits if you have a wooting module

It has all the foams and a pc plate already. You’d only maybe buy another material plate if you wanted to - like folks here have fr4, pp, carbon fiber etc

really all you need is just the case itself that is compatible

[strange bloom]

guys, not related but as I'm a Discord Nitro subscriber I have 3 Nitro subs to gift (they last just for 2 weeks, after that you have to pay), anyone here wants one?

[barren wasp]

🖐️

[barren wasp]

i have stock wooting 60he+

[strange bloom]

you want one?

[barren wasp]

yeah

[strange bloom]

you know you have to give Discord your payment details and cancel before the 2 weeks period, right?

[barren wasp]

i have been looking at the optimum case to try and get a cleaner sound. i hate tray mounting

[strange bloom]

don't want any complaints hahahaha

[tropic urchin]

nah you'll get it anyway

[barren wasp]

yeah thats fine

[glacial wind]

Honestly optimum case is great and it comes with friction mount

[strange bloom]

ahhahaHA

[tropic urchin]

just the nature of the internet

xD

[strange bloom]

ok, you have to be my friend so accept my friend request

[glacial wind]

I like mine. My travel board is the optimum setup right now

[fluid ravine]

pc plate?

[glacial wind]

Yeah black pc plate

[strange bloom]

you mean "of colour" pc plate, right? sorry bad joke

or not, depends

[fluid ravine]

couldnt tell if my eyes were trolling me or not but i barely saw the wooting logo on it lol

[fluid ravine]

ermm actually it's a shade

jk

[strange bloom]

ahaheah

[glacial wind]

I really want to do the cf 80he plate but not until I’m done with recording sound tests for the mod site

Cf plate sounds so nice and poppy

[fluid ravine]

mhm mhm

[tropic urchin]

CF plate best plate

[fluid ravine]

https://tenor.com/view/preference-glarses-mx-brown-cherry-mx-brown-keyboard-gif-21044520

[strange bloom]

what CF means here?

[tropic urchin]

carbon fiber

[strange bloom]

ou, thanks

[tropic urchin]

its second stiffest to steel for the the different plates you can get

[sacred elm]

Love to see jade pro church grow

[tropic urchin]

very nice for a clacky build

for the thoccers not so much

[fluid ravine]

brightest sounding plate out of the bunch

[strange bloom]

it this a thing for ISO layouts too?

[fluid ravine]

yea

[strange bloom]

and can I put it on a 60HE? not HE+

[sacred elm]

yes

[fluid ravine]

D: im white

nuuu

[sacred elm]

https://tenor.com/view/dumpster-fire-dumpster-fire-burning-gif-13420145

my pc plate location soon

Garbage

[strange bloom]

i don't even know where to buy one, KBD? cannot find

[fluid ravine]

mines to Hyperspeed

[sacred elm]

60he cf plate?

[glacial wind]

If you mean pc plate then just wooting store sells them

[strange bloom]

yeah, like this https://kbdfans.com/products/tofu60-redux-plate?variant=42637258784907 but ISO

[tropic urchin]

just dont forget to copy the standoffs before you toss it @sacred elm

[glacial wind]

https://wooting.io/product/60he-pc-switch-plate?Layout=ISO+Kit&Color=Black

[strange bloom]

but not carbon fiber, right? it's pc

[sacred elm]

wooting fr4 plate😳

[fluid ravine]

now we're talking

[glacial wind]

Nah good cf plate you have to go to aliexpress

[strange bloom]

it's on KBD too (ANSI)

[glacial wind]

Is kdbfans ones still with weird flex cuts

Or did they stop that already

[strange bloom]

what shops would you recommend there? apart from keypro

[sacred elm]

ye, not 80he. but they will release it soon

[strange bloom]

ah yeah, sorry

[solar tundra]

Any good Quality Shine Trough PBT Keycaps?

[glacial wind]

I haven’t checked for 60he cf plates honestly

[glacial wind]

Honestly if you want shine through just stick with wooting keycaps

[sacred elm]

wooting keycaps are nice

[strange bloom]

https://www.reddit.com/r/WootingKB/comments/1ho1esm/this_glow_is_just_unmatched/

[solar tundra]

Unfortunate my W&A Key arent shiny like the other ones

So i need to buy new ones

[solar tundra]

Any black ones?

[uneven cradle]

Honestly the aliexpress PC plate is not very good compared to the Wooting one

[calm pulsar]

yeah the quality of the plate affects the sound too

[fluid ravine]

alright everyone get your solar panels and sunglasses

[sacred elm]

https://tenor.com/view/flashbang-gif-22572243

[glacial wind]

I really hope kdbfans doesn’t do weird flex cuts in their 80he plates

[fluid ravine]

see this itself hurts my eyes

[fluid ravine]

i hope not too

it was pretty pointless on the 60he

risky and pointless

[sacred elm]

Why you dont order ali cf plate?

[strange bloom]

I was kind of trolling but bands seemed to like the idea so now I don't know what to do

[glacial wind]

I can’t bring myself to change plates every time I need to record a sound test for the site so I’m holding off for now

[sacred elm]

ah

its nice that cf plate from ali doesnt have tolerance issues like that plate from taobao or whatever, safe to buy

also why is there T1 logo in squidgame

[glacial wind]

When you win 45 million dollars you get to watch every t1 game

that’s what it takes to buy seats from the 5938292 fangirl groups

[strange bloom]

everytime I read "cf" my mind says "crossfit", sorry, had to say it

[visual ore]

What plate for thock?

Although I guess HE can't

[tropic urchin]

PP or PC plate prob, you’ll want softer plates and not stiffer

[visual ore]

Hmmm

[sacred elm]

thock

[tidal frigate]

If you want thock wait for tactile lekkers

[sacred elm]

no thanks

wtf

[calm pulsar]

uhh why tactiles?

[sacred elm]

no clue

why would they release tactile lekkers before improving current v2s instead

[tidal frigate]

@sacred elm how they would name it? Crunchy Delicious switch in dutch?

[strange bloom]

WHAT

[sacred elm]

they need to improve v2s first because its clear that theyre nowhere close to jade pros/raws

[sacred elm]

https://tenor.com/view/jose-mourinho-sweet-trouble-gif-26762341

[tidal frigate]

I don't think so they will do it in 2025

[sacred elm]

lekker pros 😎

60he pro with lekker pros

[strange bloom]

sorry, dumb noob question, pro cannot be raw?

so, Jade pro raw is not a thing?

[calm pulsar]

raw is a different switch

[sacred elm]

raw is separate switch from geon

[calm pulsar]

geon raw he

[sacred elm]

jade pros are from gateron

[strange bloom]

i'm asking because of this answer that mj gave to me before

[calm pulsar]

he just listed 2 switches

[strange bloom]

ah ok

so, geon raw he, or gateron jade pro he

ok

[sacred elm]

jade pro yes

[strange bloom]

ye sorry

[glacial wind]

Please use correct terminology

Lekker moist

[sacred elm]

My bad https://media.discordapp.net/attachments/167181566978555904/1282224703595085865/leaked.png?ex=6771938f&is=6770420f&hm=aa7221ae981d0c5f95c52bbdc097ee1dd9d231d1af626e068cab52bec3d3b5fa&

[tawdry tree]

Lekker Krokant. 😋

[solar tundra]

What is the Licker moist Switch?

[glacial wind]

What isn’t the lekker most switch is the real question

[calm pulsar]

licker moist💀

[sacred elm]

those who know

[solar tundra]

lmao i just saw my mistake

[gilded copper]

hi, what are the main difference between jade pro and jade gaming ? because they're the same price at gateron.com (i'm upgrading from lekker45 V1)

[sacred elm]

closed bottom lekkers please

[glacial wind]

Jade gaming are box stem switches, so they are tighter but smoothness takes a hit

[sacred elm]

and sound

[glacial wind]

Yeah

They sound much muddier vs Jade pros

[sacred elm]

if you have lekker v1 now any switch is going to be an upgrade

[gilded copper]

oh so less wobble right ?

wobble is my main issue with lekker

[sacred elm]

jade pros have way less wobble than lekker v1s

[glacial wind]

They’re both pretty low wobble although jade gaming has a tighter bottom out

[calm pulsar]

less wobble, closer to MX sound and feel

[sacred elm]

not even close

[glacial wind]

honestly if wobble is your concern look towards ttc magneto rgb/pom though (but it’s expensive)

With a lot of the box stems they’re tighter but the slight wobble really hurts feel

[strange bloom]

they're not HE, right?

[glacial wind]

For example this is the geon lucifer box stems vs ttc magneto pom. You can hear the difference

[sacred elm]

they are

[gilded copper]

ok thank you so much, i will go with jade pro i think, if the difference is already huge from lekker i should'nt be disappointed

[sacred elm]

you cant use non HE switches on wooting

[sacred elm]

yes

they are

[calm pulsar]

withing ttc lineup, what would you say is the best one?

[strange bloom]

hummm

ok

[wintry oxide]

Help

Help

[strange bloom]

911

[wintry oxide]

Need Help

[glacial wind]

Pom for sure

[wintry oxide]

Need Heöp

Need Help

Pls

[tawdry tree]

are you out of breath bro? what’s going on?

[strange bloom]

hahahahhahaha

[sacred elm]

please dont spam

lmao

[tawdry tree]

unplug replug

[sacred elm]

bro is crying

replug

[tawdry tree]

the board is working, you can see the light indicator

[strange bloom]

he needed help

looks like

[tawdry tree]

yeah I think so too

not entirely sure though

[calm pulsar]

damn 71 for 70 of these is tough...

[glacial wind]

Yeah they are absurdly priced

[calm pulsar]

wtb ttc pom, fine if slightly moist

[glacial wind]

I bought them on large discount stack for like .87 cents a switch and that was on hyper Black Friday discounts

now they’re back to like $1.10 which is rough

[calm pulsar]

ohh wait I found a listing for $56 for 68 of them

oh these are not pom

or are they all pom

[glacial wind]

Nah only the purple top red bottom is the pom one

[jagged obsidian]

Anyone got recommendations for keycaps with Japanese and English characters in black

[calm pulsar]

"The king of magnetism who struggle with the edge"

[glacial wind]

Yeah that’s just regular magneto

[calm pulsar]

lmaooo

[strange bloom]

not all are POM

[calm pulsar]

okay thanks, I keep looking for the pom ones

[strange bloom]

don't even know myself what pom means xD

[calm pulsar]

plastic material

[calm pulsar]

yeah seems I need to search for "full pom" keywords

[strange bloom]

OMG ok thanks

[glacial wind]

it’s basically the ‘in’ material for smooth switches, that’s why you see so many full pom switches outside of he right bow

[calm pulsar]

oh no the full pom ones seem to have a separate diffuser

[tawdry tree]

💀💀

[glacial wind]

Yeah full pom is like raw he with the not built in diffuser

[tawdry tree]

are they easy to pull?

pull out

[glacial wind]

Yeah they’re not held in place besides gravity

[calm pulsar]

do the full pom ones come without lube as well?

[strange bloom]

would you say in terms of wobble these are a better choice than raw or jade pros?

[glacial wind]

Yep lol. I don’t know why but ttc don’t factory lube magnetos

[sacred elm]

Yes, but sound is not as good

[tawdry tree]

So you turn the board upside down to remove em? 💯😅

[glacial wind]

Yeah they’re the tightest switch for wobble in he right now

[strange bloom]

but not lubbed? neeeeeeeeeeeeeext

[calm pulsar]

yeah this is tough tbh haha

[strange bloom]

i'm not manually lubbing anything except what you all know

[calm pulsar]

better get jade pros or geon raw he if you're not a nerd like us @strange bloom

[sacred elm]

https://tenor.com/view/side-eye-dog-suspicious-look-suspicious-doubt-dog-doubt-gif-23680990

[glacial wind]

It does seem like a bizarre choice to not factory lube their most expensive fanciest switch

[solar tundra]

Any1 know if i need to put the Friction Mount Pad between the PCB and the PC Plate?

[tawdry tree]

KoMs? Mine had lube on the bottom and top of the spring.

[strange bloom]

+1 hahaha I'm trying to buy them from Amazon like a proper noob

[tawdry tree]

A decent amount and not oil.

[glacial wind]

Yeah I think that’s only thing they lube

[tawdry tree]

Yeah

Rails were dry

[glacial wind]

They do some weird donut dip thing but the stem is raw

[sacred elm]

are jade pros still on sale on amazon?

[calm pulsar]

do I waste some of the new years bonus on full pom ttc

[sacred elm]

yes and use those on steel plate

[glacial wind]

It’s quite the acquired taste honestly lol

[calm pulsar]

im wondering if this is actually close to my frankenswitch in terms of tightness, but way more consistent

could be something I prefer

[strange bloom]

https://www.amazon.es/Jade-Yellow-Pro-V3-interruptor/dp/B0D6RRD94R from Amazon ES, 43 euros 72 pics, monday at my home, am I losing something?

[calm pulsar]

steel💀
thankfully I only have fr4 and alu for my frog mini haha

[tawdry tree]

Not

Jade

Pros

Those aren’t magnetic switches.

[calm pulsar]

wait this is a mechanical switch

[sacred elm]

these are not it💀

[strange bloom]

wtf they say jade pro (not HE, but...) fuck my life

they make it more difficult than it is

[stone flax]

nice find

[sacred elm]

https://www.amazon.com/GATERON-Magnetic-Pre-lubed-Pre-Travel-Mechanical/dp/B0DFH4LKML

[strange bloom]

ahahhaahhaa you

[sacred elm]

no sale anymore

gg

[stone flax]

you should look for geon raws for ur wooting

[calm pulsar]

IQ test

[strange bloom]

until 10 minutes ago I thought gateo pro raw was a thing

[strange bloom]

ADHD test

[strange bloom]

what's this website?

[solar tundra]

Can i use the Friction Fit Pad with Tofu 60 Redux?

[stone flax]

geon

[strange bloom]

21 shipping, aham

[calm pulsar]

pay

[strange bloom]

price is ok?

[tawdry tree]

Yes.

[calm pulsar]

check aliexpress first tbh

kbdfans have an official store there

might be cheaper shipping

[strange bloom]

which shop?

[strange bloom]

ok

[solar tundra]

Not grounded, be aware there is a very low chance to damage the electronic board with severe electronic shocks (ESD). ESD damage falls outside of warranty. Modification is: Use at own risk / Uhm

[tawdry tree]

Any

[jagged obsidian]

Anyone got recommendations for keycaps with Japanese and English characters in black for 80he

[strange bloom]

there are fake ones xD

[sacred elm]

https://deltakeyco.com/products/geon-raw-he-switch

[solar tundra]

Just found this

[tawdry tree]

If you’re worried, just get a conductive foam strip/piece and place it under the USB-C port.

[meager pivot]

for a 60HE+ module + tofu60 build using geon raw HEs: do i need long-pole stabs or are the module included screw-ins gucci?

[strange bloom]

hummmm better...

[sacred elm]

stock is fine

[sacred elm]

yes get them

[cobalt marsh]

https://kbdfans.com/products/tofu60-redux-case?variant=41478178898059 any keycaps yall can reccomend that will go well this this color that isnt exspensive for no reason

[sacred elm]

https://shop.wuquestudio.com/products/in-stock-ws-pbt-wob-keycaps

if you like this

[cobalt marsh]

those are too dark for tghe andonized grey

the preview isnt the same

[meager pivot]

good to hear because nowhere has reasonable uk shipping AND both the lube / tools + long-poles i was looking at 🤕

[sacred elm]

youll be fine with stock stabs

[meager pivot]

would still benefit from lubing the geons right? or also unnecessary

[sacred elm]

hand lube will always be better, but they are decently lubed already

[calm pulsar]

I'd say just lube the springs to improve the sound

[sacred elm]

what you can do is, bag lube springs

and call it a day

[meager pivot]

amazing

[strange bloom]

wooooooooooow amazing team job, thanks guys

[sacred elm]

[strange bloom]

any experience with this spacebar foam?

[solar tundra]

Which Switches have the same Soundprofile like WS Dash Switches?

[sacred elm]

jade pro/raw he

both will be an upgrade to dashes

[strange bloom]

the slash that made all the difference...

[sacred elm]

lol

[solar tundra]

When i listen to Videos for example i always still like the Sound of WS Dashes more. Upgrade in what? Feel?

[sacred elm]

everything

[strange bloom]

man please you got scammed a 2,5% of your wooting 80HE...

[dusty wren]

does tape mod hurt the pcb

[sacred elm]

smh...

[dusty wren]

like i feel like its bad ofor the pcb

[strange bloom]

its feelings?

[strange bloom]

nah

[jagged obsidian]

Anyone got recommendations for keycaps with Japanese and English characters in black

[strange bloom]

I'd say the opposite in fact

[tawdry tree]

If the tape isn’t very sticky, like painters tape, then no.

If it’s duct tape, then yes.

[dusty wren]

like would the kbdfans tape mod one

is that sticky

[tawdry tree]

that’s fine (it’s made for that)

[sacred elm]

just use painters tape

[uneven cradle]

The tape mod I got from kbdfans was actually really sticky and left residue

Would not recommend just use regular painters tape

[tawdry tree]

Wtf

That’s how they advertise it right?

As tape mod

[uneven cradle]

Yep

[strange bloom]

is there a comma lacking here?

[rancid crypt]

Does anyone have a decent keycap website for europeans//quick shipping for a european

[uneven cradle]

This is the one I ordered from kbdfans

[solar tundra]

So would you say that Wooting Friction Pad, Raw HE and PBTFans Keycaps in my Tofu60 will improve everything alot?

[tawdry tree]

🥴 very nice KBDFans

[sacred elm]

Yes.

[tawdry tree]

Oblotzky, DeltaKey, Keygem

[calm pulsar]

I have this one as well, havent opened or used it tbh 😄
maybe the glue substance went bad in time?

and became sticky

[knotty iron]

case might need to have a grounding sponge if you wont screw it in at least one place

im not 100% certain

[uneven cradle]

Not too sure I applied it pretty much as soon as I got it and it didn't feel great going on either

[rancid crypt]

Going to check them out straight away, appreciate it! Thanks!

[solar tundra]

Yeah its said its not grounded on the compability site

[stone flax]

where are u from

eloquentclicks

https://eloquentclicks.com/products/geon-he-raw-switches

also try aliexpress

prototypist

and delta keyco

maybe kbdfans

[tawdry tree]

If your budget is <€90 then you can skip Oblotzky

[strange bloom]

already buy them from the frenchies

delta

[stone flax]

oof

it ended up cheaper than from eloquent?

i know it costs like double but

[tawdry tree]

Wow

[stone flax]

free shipping ya never know

[solar tundra]

You have any Grounding Sponge to recommend?

[tawdry tree]

Just adhesive conductive foam on Ali or a hardware store near you if they have it

you can cut it to size yourself

[strange bloom]

hahahhaa no, I forgot about them, it's cheaper and faster actually, 42 euros, shipping 48-72 hours xD

[stone flax]

:0

[calm pulsar]

there are now 4 vendors who sell Venom60he on aliexpress

[strange bloom]

yeah, now I'm buying in eloquent and cancelling in deltakey, welcome to the life of an ADHD person

[stone flax]

haha

its all good man

<3

[dusty wren]

what keycaps are these

[strange bloom]

nah it's not, but I don't care anymore about these "mistakes" xDDD

[knotty iron]

i dont no, maybe Im just looking up the wrong words

[visual ore]

https://torontokeyboardman.ca/products/wooting-80he-modding-kit?variant=44037787451587

Do you guys think there are any difference between these plates?

Vs the Aliexpress stuff?

[stone flax]

if i had to guess

crp arabic

or another dyesub set similar

[calm pulsar]

@stone flax do you think it's worth getting some of these plates from hyperboring to use with luminkey lx60 or just try with the included plates?

[dusty wren]

oh yeah

thanks

[cyan lark]

It is done: friction fit added to my 60HE. Alumaze case, Jade Pro switches, tape mod, foam in spacebar.

[sacred elm]

😳

[calm pulsar]

sounds clean, have you tried without tape mod though? I kinda feel like with friction mount tape mod isnt really needed

[reef oar]

no reason to go and take the tape off though

plus i imagine it'd still have an effect

albeit a little less

[cyan lark]

I did but didn't record it. Will do so at some point in the near future.

[reef oar]

what's the consensus on steel plates

wanna replace my pc plate

might get fr4 but i imagine steel is stiffer

[dusty wren]

what does tape mod even do

[sacred elm]

steel is stiffest plate

[reef oar]

it's like a dampener

[sonic sierra]

anyone seen jerrorr's vid on the Geonworks Venom 60 HE x Wooting Optimum case?

[reef oar]

can't even find steel

alu will do

[calm pulsar]

I feel like tape mod reflects sound from pcb back to you

so depending on the build it can make the board sound worse, like cheap typical sound of chinese plastic boards

[sacred elm]

yes

[calm pulsar]

but if you have a hollow case it can improve the sound

[halcyon flax]

Do we have ceramic keycaps for iso layout

[reef oar]

i'm sure they exist

or you can do the cursed

[halcyon flax]

Which is?

[reef oar]

and have the plastic enter key

that would be cursed though

[halcyon flax]

We have other keys to worry though like shift?

[reef oar]

yeah

it's like 2 keys no?

left shift and enter

and the one next to enter

[halcyon flax]

There’s one more key with the left shift

[reef oar]

i forgot, haven't used iso in years

[halcyon flax]

It’s fine

[reef oar]

oh yeah

|/

or something

[solar tundra]

You have any Issue with the Port?

[halcyon flax]

I will just stick to normal until they release new ones hahahaha

[dusty wren]

so would u recommend it for tofu redux

[reef oar]

yes

[calm pulsar]

if you mount using screws might give it a try

[cyan lark]

Without the tape mod it was fine, with it it's a little tight, but I'm not worried about the small bit of pressure.

I will note that I had to get a grounding pad and scrape off some of the paint job to get the PCB grounded, in case anyone else is thinking of doing this.

It's on the inside of the case so no ugliness, just some strips to electrically connect the grounding pad to the case.

[solar tundra]

Which Grounding Pad did you buy?

[strange bloom]

guys, is the weight bar on the tofu redux a yes or yes buy?

[reef oar]

if you want to buy

[rancid crypt]

No worries, thank you!

[strange bloom]

I mean if it's really useful

[solar tundra]

I have a Tofu 60 Redux so its also not grounded like Alumaze

[reef oar]

it's not super useful but it does help

[cyan lark]

Just something off amazon, can link if you can't find it

[reef oar]

i wouldn't say it's a must have or make or break thing

[solar tundra]

You from EU?

[cyan lark]

Negative, USA

[reef oar]

nice to have though ofc

[strange bloom]

help to what? sound? stabilization? feels like it's 25 dollars just for the keyboard to be a fatass

[reef oar]

sound & weight

[solar tundra]

Mhm can you still link me so i can see what i need to get

And wym by Scrape off Paint? On the Grounding Pad?

[reef oar]

because otherwise it'd sound slightly more hollow and be lighter right

even if you fill the gap with foam

[strange bloom]

I guess

i could also fill it with rocks

[reef oar]

i'd say get it though

it's like a peace of mind thing

[tawdry tree]

The white and pink(?) Alumaze are painted

[reef oar]

it'd be like getting a ferrari without carbon seats

[tawdry tree]

for anything anodized, that’s not necessary

[strange bloom]

totally get it now, that's why I got my Ferrari with carbon fiber seats

[reef oar]

same

my beautiful f12 berlinetta

in game

[dusty wren]

dyk how many layers come w the kbdfans tape mod thing cs i bought it

or does anyone konw

how many layers would u recommend

[calm pulsar]

seems like 1 to me

[reef oar]

isn't that thing like a cutout?

[calm pulsar]

on kbdfans tape

[reef oar]

so it'd be one layer but thick

[cyan lark]

https://www.amazon.com/dp/B0CXPHPYZR?ref=ppx_yo2ov_dt_b_fed_asin_title

[reef oar]

idk i haven't bought it

[cyan lark]

I'd also recommend using a multimeter to check for continuity from the case to the usb port after you finish, just to be sure.

[dusty wren]

oh

if its js 1 does that work or how many layers od i need

[calm pulsar]

this is subjective, some people say 3-5 layers which is kinda crazy xd

[reef oar]

well

i assume the kdbfans tapemod thing is like

gonna be thicker so you don't have to buy several

but maybe i'm wrong

[solar tundra]

You scrapped the Paint of the Case?

[strange bloom]

LOL I just discovered KBD prices are no tax included, so my redux 80$ order is 120 with shipping xD. I'll go with the alumaze then, or the optimum

[cyan lark]

Yes, with a razor.

[inland jetty]

https://www.youtube.com/watch?v=e86irQcJaDI

[tawdry tree]

Where are you from?

[reef oar]

i got my tofu redux on aliexpress

[calm pulsar]

with those taxes EU I guess haha

[strange bloom]

Spain, 20 shipping + 20 taxes (aprox)

[strange bloom]

yeah

[tawdry tree]

Maxgaming?

[strange bloom]

humm...

[strange bloom]

kbd website

[tawdry tree]

I mean check maxgaming

[reef oar]

https://www.aliexpress.com/item/1005005913007417.html?spm=a2g0n.order_detail.order_detail_item.3.1c58f19ca8CmMI&_gl=1*1hw63rt*_gcl_aw*R0NMLjE3MzU0MjYxNTYuQ2owS0NRaUE0TDY3QmhEVUFSSXNBRFdybDdGNklNQjlOeE5TWElmbnhtX0sxcG1TRzlsR29FcjFHRkd3eGxtTEdVYUhIeUZ1M3owR1p1c2FBdEkzRUFMd193Y0I.*_gcl_dc*R0NMLjE3MzU0MjYxNTYuQ2owS0NRaUE0TDY3QmhEVUFSSXNBRFdybDdGNklNQjlOeE5TWElmbnhtX0sxcG1TRzlsR29FcjFHRkd3eGxtTEdVYUhIeUZ1M3owR1p1c2FBdEkzRUFMd193Y0I.*_gcl_au*MTA0NTk2MTQzMS4xNzMzNjc1MTQw*_ga*MTAxNzU1MzY4MC4xNzMzNjc1MTQx*_ga_VED1YSGNC7*MTczNTQyNjE1NS42NC4xLjE3MzU0Mjc1NTAuNTMuMC4w

[strange bloom]

ah ok

[tawdry tree]

see how much cheaper it is.

[solar tundra]

You think i need to do it with Tofu60 too?

[kind helm]

what is this?!

[calm pulsar]

nahh

[inland jetty]

are you listening to the vid? all the stuff are listed below

[calm pulsar]

is that a hyppiyo video

[tawdry tree]

Which board is this?

[strange bloom]

spider eggs, now you're doomed

[polar girder]

Caviar in a case?

[reef oar]

caviar

[cyan lark]

I don't have a Tofu60, but if the case is painted, yes probably.

[calm pulsar]

lol that's elite

[tawdry tree]

Which Tofu bro

[cyan lark]

You can tell easily by using a multimeter and see if you get continuity between any two points on the case itself.

[inland jetty]

that video is for new people before they start buying all sorts of materials

[kind helm]

i just clicked on it, this s44t is a remake of his old vid no?

i watched the old one before

[solar tundra]

Redux

[tawdry tree]

Color!

[solar tundra]

Black

[polar girder]

!

[tawdry tree]

It’s anodized so you don’t need to scrape off anything.

[cyan lark]

Isn't the alumaze as well?

[tawdry tree]

The White and Pink aren’t afaik

[inland jetty]

could be, he uses some footage from older vids on it I believe. It's a really good video reference tho whendeciding what materials to mod keyboards with

[tawdry tree]

White I know for sure

Pink I thought so but not sure

Can’t anodize in white

same with the tofu

E-Coat

[cyan lark]

I'm on blue, which it says is anodized. Had no continuity between points on the case until I scraped it.

[tawdry tree]

then paint I think.

🤔🤔

[kind helm]

didn't mention what that is, he was talking bout technical things about sound

[stone flax]

appears to be tiny steel balls

[inland jetty]

exactly.... specific sound profiles require specific materials

[reef oar]

crunchy caviar

[kind helm]

maybe the board is blackwidow? dk

[cyan lark]

I just tested the 80HE black zinc, which is also anodized, and no continuity on the case. I'm not scraping it right now, though 🙂

[tawdry tree]

Oh interesting, anodization can hinder conductivity.

[stone flax]

clay, polyfill, epomaker switches, razer bw4, steel balls

waow

when did keybored become a hipyo fan

[kind helm]

my guess as well, hes talking weight of board in that part

[cyan lark]

There you go. I had thought I wouldn't need to with anodized paint, but empirically that wasn't the case 😦

[reef oar]

fr4 vs carbon fiber for plate?

[tawdry tree]

The Optimum is anodized as well but maybe not below the pad?

[strange bloom]

meh, it's almost the same, thanks for the recommendation, I think I'll go with the alumaze

[cyan lark]

Yeah I'm guessing they left a spot beneath the pad

[inland jetty]

lol, that vid is actually legit, not sure why u guys are memeing him

[tawdry tree]

Interesting. @solar tundra you might need to scrape as well. 🥴

[reef oar]

i'm not a fan of hipyo

[inland jetty]

some of the materials are not common in the modding scene for sure but the video does a good job covering the topic

[tawdry tree]

nobody here is, so you’re not the only one 😂

[tawdry tree]

a sort of reputation if you will

[inland jetty]

just because they use unconventional materials on keyboard?

[tawdry tree]

nah, because of the advertising he does and his takes overall

[reef oar]

every short is the same

[strange bloom]

yeah @tawdry tree alumaze on wooting website is 120 at home with the 60he early buyer discount. What's better, redux + weight bar or alumaze?

[reef oar]

they send him a board

[tawdry tree]

highly opinionated content imo.

[reef oar]

he'll press the switch a couple times and say "it has good switches"

[inland jetty]

here's the thing

mfs watch it lmao

[tawdry tree]

Tofu with weight over alu for sound

[inland jetty]

we can hate on it, call it shitr, for what it is

[tawdry tree]

true

[strange bloom]

ok

[inland jetty]

but mfs watch it LMAO

[reef oar]

i mean yeah

it's tiktok format

[tawdry tree]

you can check 2nd hand markets as well

could get a deal there

[strange bloom]

sorry I can't speak poor

[inland jetty]

so you cant really hate him in taht sense cuz thats his job and thats where the money trail is. Im not saying its a good review or its moral and such

[tawdry tree]

no hate, just (reasonably constructive) criticism

[inland jetty]

dayum, i felt that LMAO 😂

[strange bloom]

hahahaahha sorry

[tawdry tree]

HEYYYY

[cyan lark]

Removed tape mod and took a recording. Still alumaze friction fit, Jade Pros

[tawdry tree]

it’s an aluminum block

[strange bloom]

[inland jetty]

kat specimen makes me feel poor. Im trynna find the thing used, it still cost an arm and a leg LMAO

[gleaming crow]

my 80he spacebar and left shift get stuck sometimes when they bottom out, what do i do?

[reef oar]

bash it

or maybe too much lube on your stabs

[cyan lark]

Remove the pads from underneath the stabilizer housings

[strange bloom]

yeah, on the stabs...

[gleaming crow]

how do i do that

[cyan lark]

Take apart the board, remove the stabilizers, peel off the white pads under the housings.

[inland jetty]

usually, youtubers have a full vid when posting shorts like that since they probably cut the short from the video but yeah, I dont really follow him like that so idk.

[gleaming crow]

are the stabs screw in or clip in

[reef oar]

diddy?

[cyan lark]

Screw in

[gleaming crow]

okay easy enough ill get working on that

much appreciated

[cyan lark]

The only tool you should need is a PH1 driver bit and maybe some tweezers for getting the pads up.

Or a guitar pick

[tawdry tree]

neither do I tbf to him but from what has been posted here, I mostly agree with the criticism.

[reef oar]

personally i'd just bash them but maybe that's just me

[inland jetty]

dicks lmao. Be nice bois. They probably do have a full vid of them. Aint no way companies are paying them just for shorts, theyre not famous.

[reef oar]

i mean

nah i won't say it

he's good man

[inland jetty]

? lol

Not even Boardzy ( Mouse end of things) is safe when it comes to those. He does both

so I just assume they do both when I see a short honestly.

[hearty path]

Hello

Any one know what hex code is optimums case is ?

[cyan lark]

Alumaze friction fit Jade pro w/ tape mod from room cam

I'm digging how it sounds and feels. I think I might be done messing w/ the 60.

[sacred elm]

thats pc plate right

[cyan lark]

Steel

[sacred elm]

😳

[cyan lark]

The friction fit + tape really tones it down, it seems

[kind helm]

#1308938534224138270 message you wanna tone it down some more?

[sage flicker]

ok so I need to buy more switches. I only bought 8 Magneto TTCs to test them out, are they still the best?

[tawdry tree]

In terms of performance, yeah. Not that you’d notice the difference between them and Raw HEs for example though.

[cyan lark]

I like them for their loud and sharp feedback, but that is very much preference. For performance I don't think I could tell them apart from any of the popular switches (raw, jade/pro)

[hollow heart]

Bag lube or hand lube my springs?

[cyan lark]

How much do you value your time?

[hollow heart]

😭

[cyan lark]

I don't think I will ever hand lube a switch/spring again.

[hollow heart]

I mostly just mean the spring

Like is bag lubing the springs that bad?

[stone flax]

?

[kind helm]

its not bad at all

[stone flax]

people literally popularized the use of baglubing just for the spring

[hollow heart]

Bet

[stone flax]

because its the part which can take oil and doesnt worry about careful coverage

[hollow heart]

I'm starting tonight but I'll prolly take till tomorrow

[cyan lark]

I put oil on the springs and tub lube stems. Hand doing all of that took so long, and my poor back.

[hollow heart]

Haha fuck my back

I got the wooting lube kit, is the stabilizer grease for the springs too?

[kind helm]

hell nah

[hollow heart]

Or the krytox 205 for both switch and spring

[kind helm]

dk if you can bag lube with 205, people using lighter lube aka oil to bag lube spring

[cyan lark]

I used the krytox on my springs when I hand did them.

[stone flax]

tub lube stems ☠️

[stone flax]

NO

[hollow heart]

Tub lube meaning what?

[stone flax]

NO

[cyan lark]

Hey, you live your life the way you wanna.

I just wiped the tops/bottoms off after

[kind helm]

👅 tub lube for that creamy look

LMAO

[stone flax]

i mean its a waste of lube and even though it just the job done it’d be discernibly worse than hand lubing

[cyan lark]

It is the MSG of switch enhancers 😋

[inland jetty]

goddadmn, someone say msg? i put that shit on everyday

[hollow heart]

So krytox 205 on switches and springs?

[stone flax]

paint 205 on a container, put stems in, shake shake

[stone flax]

?

[cyan lark]

For me it isn't discernibly worse, but I am also not drinking my keyboards from a brandy snifter

[stone flax]

bag lube springs with oil

[hollow heart]

I'm just making sure

[stone flax]

205 to hand lube

grease for stab wire

[cyan lark]

Waste of some lube yeah, but Daddy can swing that expense if it saves me several hours and back ache.

[stone flax]

205 for stab housing and stem

[cyan lark]

(I'm Daddy)

[hollow heart]

Damn so it just doesn't come with lube for the springs?

[stone flax]

i mean you can tub lube springs if u dont have oil in hand and dont want to buy

But no

It didnt come with em

[hollow heart]

What kind of oil works?

I've got 10w-30 💀

[cyan lark]

I use

[hollow heart]

I'll prolly just hand lube them than

Thank you for advice everyone

[stone flax]

sure

please dont overlube

esp since ur doing springs

it shouldnt be cakey

[hollow heart]

Yeah I got a tiny ass bottle I can't overdue to begin with

[cyan lark]

You'd be surprised

[hollow heart]

Haha

[cyan lark]

It takes an exceptionally small amount on stems to overdo it IMO

[hollow heart]

I'll be conservative, I would rather do it twice than ruin anything

[cyan lark]

It is way harder to remove than to add. Good idea.

[kind helm]

personally, the best way is to experiment with the first few

[hollow heart]

Exactly what I was thinking

Their technically factory lubed too

[kind helm]

see how it turns out, then you know how much you need

[hollow heart]

Ty :)

[cyan lark]

I did that but I found it surprisingly difficult to get a sense for the extra "weight" from the new friction until I had enough keys going to really type on them.

[hollow heart]

I'm doing 36 to start than the other 54 tomorrow

[cyan lark]

By weight I mean pressure needed, but maybe more importantly how sluggish they were on the return

[kind helm]

my perspective is that as long as its not squishy you are fine

a tiny bit of overlube it would just take a day or 2 to even out

[hollow heart]

Gotcha still gonna play it safe

[kind helm]

if it sounds watery/ squishy then its fcked you gotta redo

[hollow heart]

I went super duper light but I hit a lot of the switch

Seems no squishier/ slower than the unlubed switch

[limber void]

why does my spacebar sound so pingy

[barren wasp]

Needs more lube

[limber void]

which lube?

[cyan lark]

https://tenor.com/view/every-single-one-samus-paulicelli-66samus-faq-my-worst-live-gig-fail-gif-17724859

[barren wasp]

i bought the store one

[inner wren]

Cat

[barren wasp]

and my stabs sound nicer than ever

[limber void]

ok thanks

[sage flicker]

mmm ok nice. thx. Now that you mention it, I actually found the Raptor HE Geon switches I ordered a long time ago, lol. Will use these instead and save some dough. 💪

[sacred elm]

raptors

[tawdry tree]

I didn’t say Raptors, just to be clear. Raw HEs are very stable so you won’t notice a difference in performance with TTCs. Raptors are not, the difference in performance will still be small but the sound and feel is drastically different.

[stone flax]

were never the best

for supercalifragilistagaming stability deadzone gooning sure

[tawdry tree]

Just performance, yeah.

[sacred elm]

just use lekker v1s bro

[tawdry tree]

Realz

[sage flicker]

ohh ok. ic ok thx lol

[cyan lark]

The only performance issue that I noticed at times is the sticking at the top for Geon RAWs

And really only when gently pressing. Regular typing it isn't noticeable IMO.

[sacred elm]

yea at the very top there is some friction

[tawdry tree]

You can resolve that by slightly cleaning the lube off the top housing and top of the stem.

[sage flicker]

I think I originally bought the Raptors because they had less stem wobble, so I'm guessing the Magnetos and Raw went further and got even better.

[tawdry tree]

The part of the stem that hits the top housing, that spot. If there’s lube there it feels like friction.

[cyan lark]

Huh, I'd tried resolving it by lubing the stems. Project for another day 🙂

in an attempt to "even it out" I guess

[sage flicker]

so for gaming, TTC best? 😄

[tawdry tree]

Stem swapped Raptors have less stem wobble but Raptors, not really.

[stone flax]

no

Kom

[sage flicker]

Kom? why they the best for gaming? lol

[cyan lark]

TTC is KoM 🙂

[sage flicker]

ah k

[cyan lark]

Or vice versa

[tawdry tree]

Yeah it’s tricky, it feels a lot like friction. I thought it was friction too but someone here found out that it wasn’t.

[sage flicker]

ah yes the stem swap, now I remember. Think I did a few of those.

[sacred elm]

lets be honest, unless you have lekker v1, raptor or some dogwater switches, most decent switches nowadays (raws, jade pros, ttc) have the same ish performance

no need to chase that nerdge 0 deadzone

[stone flax]

nah bro

i need it

who cares if shit is plasticky box stem

[tawdry tree]

you’ll lose games because of this mindset

[stone flax]

light 30g shit spring

[sacred elm]

ok

[tawdry tree]

lowest latency, highest performance. there is no other way.

[stone flax]

mommy said koms make me game better

[sacred elm]

i need koms with 20g springs!!!

[sage flicker]

just swap spring?

;0

[sacred elm]

light springs better for gaming!!

[tawdry tree]

springless KoMs bro

go all in

[sage flicker]

and wdym by deadzones

[cyan lark]

Springless? Is this the dark abyss of modding?

[sacred elm]

with stable switches, bottom deadzone decreases on wooting

[cyan lark]

KoMs make me happy, and when I'm happy, I'm a better person.

[sage flicker]

but deadzone as in like...it doesn't register at certain actuation points or something?

[tawdry tree]

when you bottom out a switch and release it, there’s a range in which RT won’t activate right away. The more wobble a switch has, the bigger that range is.

[sacred elm]

so if you have 0.15mm deadzone on lekkers, you will have 0.03mm on ttc koms

because there is almost no wobble at the bottom

[sage flicker]

ah ok yes. the .15 range at lowest. Yeah I had to decrease the sensitivity there because my WASD wasn't working properly.

[tawdry tree]

Just 4mm actuation point and 0.01rt settings and you can wiggle the switch to activate it.

yesyes

[sage flicker]

but that's at 4mm actuation which most don't use?

oh but for holding keys

[stone flax]

so if you have 0.15mm deadzone on lekkers, you will have 0.03mm on ttc koms on a wooting*

[sage flicker]

ok that works

[stone flax]

Venom sweep type shyt

geonworks

[sacred elm]

geonworks

[cyan lark]

Some troll mods making their way in, love it

Unless there's actually some use for that?

[stone flax]

Use for what

[sage flicker]

is this .15mm deadzone on top of the already built in .15mm RT actuation requirement?

[tawdry tree]

i’m joking

[cyan lark]

Springless

Sounds like a joke but I honestly don't know what some people use these things for

[sacred elm]

we are talking about bottom deadzone

[tawdry tree]

Springless is useless. If you have a board that can do very low RT and has a deadzoje very close to 0, you could actuate the keys by pressing on them I think.

Like by the little flex of the plate.

Touch screen ish.

😂

[stone flax]

neuratype

just think

type

[sacred elm]

holy shit

[tawdry tree]

goodmorning

[sacred elm]

what was that link😭

@sage flicker https://m.bilibili.com/video/BV1zH1zYcEHN?spm_id_from=333.337.search-card.all.click

[cyan lark]

One step closer to 0mm travel just like on the iPad my mother raised me on ❤️‍🔥

Gotta say I'm really pleased with this friction fit on the 60

[tawdry tree]

You’d have to relearn typing though. Typing without resting your fingers on the keys is hard af

[tawdry tree]

it’s a world of difference coming from tray

[sage flicker]

lol nice song. this is deadzone testing im guessing

[sacred elm]

😭😭😭😭 mad60

[sacred elm]

yes

lekker and ttc kom

im not sure if we know whats the deadzone with raws and jade pros but its better than lekkers

jade pros have slightly less bottom wobble than raws

[jagged obsidian]

Where can I buy ttc koms

[cyan lark]

https://google.com/search?q=ttc+magneto+buy

[visual ore]

https://letmegooglethat.com/?q=Where+can+I+buy+TTC+Koms

Just joking

Are you looking for like the cheapest price?

If so you will need to shop around

[jagged obsidian]

Ok thanks

[hollow heart]

First 36 are done

Kinda wanna do the other 54 now too

[drifting bronze]

Guys i have a wierd question what could I do to make my keyboard more quiet

I'm using a 60he with the tofu 60 redux pc plate and jade switches

[cyan lark]

Put on a podcast/long video and enjoy the process

[hollow heart]

I'm so happy with how they sound, after the first one and I did the rest with lubing the top piece and it makes it sound so nice

Plus my 80he is shipped finally

[drifting bronze]

Does anyone know? How to make it more quiet?

[visual ore]

Overlube the switches?

[cyan lark]

Jam that fucker full of foam

Treat it like a musket

[visual ore]

If you want to make it more quiet it's going to affect the feeling of the keyboard

Also maybe heavy springs so you bottom out less

Rubber dampers inside the switch

[drifting bronze]

yeah i was thinking of buying other switches

running these now for a few months

[sacred elm]

jades are definitely loud, if you want quieter switches, probably your only option is lekker v2 and if you have 60he with steel plate, you can swap it with pc plate

that will also help

[drifting bronze]

but metal on metal will ping righ?

right?

in my tofu 60 redux

[sacred elm]

wdym metal on metal

[drifting bronze]

yeah

not metal

[visual ore]

Metal on metal?

[drifting bronze]

but the redux with the steel plate

[sacred elm]

do you have steel plate now?

[drifting bronze]

no

pc

[sacred elm]

ah then its fine

steel is way louder

[visual ore]

^

The harder the material the more clacky

[cyan lark]

You could friction fit that pupper

[visual ore]

The softer the material the more thocky

[drifting bronze]

im currently using a 60he with the tofu 60 redux / pc plate and silecone insert and the jades

[sacred elm]

yea as TuringTest said get friction fit pad for your 60he, do tape mod and get some lekker v2s because theyre quieter than jades

[visual ore]

Your best option is another switch with heavier springs, lubed up and foam. Maybe throw in a tape mod, sand mod, etc.

[drifting bronze]

sand?

tf

[sacred elm]

sand

[visual ore]

Sand, Foam, Metal Beads anything to fill in the hollow space

[drifting bronze]

ohhhhh

[cyan lark]

https://tenor.com/view/anakin-star-wars-padme-gif-5048796

[visual ore]

Something that will absorb the sound

[marsh saffron]

Foam sandwich pad is quieter than silicone

Could give that a try

[drifting bronze]

oh ok good to know thanks

[marsh saffron]

I prefer the foam over the silicone for my jades

[drifting bronze]

damn that has been a while

[cyan lark]

My recommendation is not to put sand in your keyboard. I'm a wild one, though.

[drifting bronze]

hahaha ok thanks

[drifting bronze]

you got the dashes right?

[visual ore]

I was thinking about this video haha

https://www.youtube.com/watch?v=k8JI4zLT6WM

[marsh saffron]

Yeah

[drifting bronze]

oh yea

how are the lekker 60s

V2

[stone flax]

Just put meat in your keyboard

flank steak

[drifting bronze]

like i like the lighter click of the jades

way more then the ones of the lekker 60 v1

i also prefer the click force

[cyan lark]

They say you should put filet in there, but chuck is what's up

[hollow heart]

I can put meat in your keyboard 🥴

Excuse me I'll let myself out

[fallen pecan]

load it up with 2 wagyu ribeyes

[drifting bronze]

how big do you think the 60 is?

lol

[fallen pecan]

ok 1 wagyu ribeye sliced in half

[drifting bronze]

that sounds better i could try lol

[cyan lark]

If you pound it out

[inland jetty]

you guys are onto something here

she can be your thumbnail once you guys record the video lmao

[stone flax]

Visualization

[inland jetty]

makes sense

[stone flax]

idk someone needed to see this before

[inland jetty]

its really cool how we have these now

[hollow heart]

My neck is killing me

[cyan lark]

Take a break. But also you're so close.

[hollow heart]

Ikr Ima stretch tho

[dusty wren]

is it js me or are jaadde pros really hard to open

[cyan lark]

It's just you.

[dusty wren]

like my switch opener opens it

but

both sides never open