The one I have on the module now fell off right away I didn’t try the pre installed silicon yet but I’m switching over to it now
#🔧│keyboard_modding
late crow
tawdry tree
The one I have on the module now fell off right away I didn’t try the pre instal...
Ah, alright.
late crow
Ah, alright.
Welp if you’re wondering the friction pad comes pre installed with the 60he + module
late crow
I just took it all apart and installed a whole new silicon pad just to not have to do it.
late crow
It doesn’t fall out with it right?
It doesn’t just the usb port there’s like this silver piece idk if it’s suppose to come out or not or if the usb is suppose to go inside it or sit above it.
tawdry tree
It doesn’t just the usb port there’s like this silver piece idk if it’s suppose ...
That’s conductive foam to ground the board
it’s stuck to the case with adhesive
so don’t remove it
it’s normal.
😅
late crow
So this piece I just place the usb port above it I almost took it out
sick shard
can i cancel my order and add the keycaps with discount
i aint getting any sleep till i got the full setup
its in fullfillment so i cannot upgrade order
untold wigeon
does anyone have a good cheap palm rest for the wooting 60
fast oriole
does anyone have a good cheap palm rest for the wooting 60
i second this
untold wigeon
something that complements the stock case really well
fast oriole
dwayne do you have the raw he switches
untold wigeon
yea actually
fast oriole
the 50g?
fast oriole
how do you like them
untold wigeon
theyre good, sound is really nice and i like that the force isnt too much to press the keys in
stem wobble is significantly lower
its been a while since i used the lekkers so i forgot how they felt
fast oriole
do you find them to be too light?
untold wigeon
very light yea but thats what i was going for
i was making a lot of accidental keypresses
in the beginning
untold wigeon
nope i would recommend them
fast oriole
ah okay
fast oriole
order 90
fast oriole
order amazon ones
sick shard
i mean wooting 80he module and case
fast oriole
why edit the module and case
fast oriole
did you message support
sick shard
on here?
fast oriole
no on wooting
fast oriole
message them worst they can say is no
cyan lark
So this piece I just place the usb port above it I almost took it out
That is a bit of foam w/ conductive material wrapped around it to ground the case if you're using it in the friction fit mount arrangement.
sick shard
finally found a cool keycaps set but its not cherry profile
with this the ghost case will look like the transparent Gameboy Advance remember those?
if i could find a cherry profile double shot backlit shinethrough PBT with this colour i would buy it
tawdry tree
if i could find a cherry profile double shot backlit shinethrough PBT with this ...
It’s OEM, OEM is just a little taller. You won’t even notice it. They’re cheap, just get them and see how they are. If you don’t like them, you can return them.
sick shard
i think i am gonna get SA
i looked at the profile thing i think i might enjoy SA
then again my previous setup was laptop keyboard xD and ps5 controller
tawdry tree
Did you check KeyGem and Oblotzky?
If you want the best, you’re not gonna find the highest quality on amazon.
late crow
That is a bit of foam w/ conductive material wrapped around it to ground the cas...
Is the friction pad suppose to be this loose I flip over the optimum case and with the friction pad it still falls out if I shake it very little.
sick shard
Did you check KeyGem and Oblotzky?
after searching far and wide
i found the one.
Finally, i can sleep 
tawdry tree
Is the friction pad suppose to be this loose I flip over the optimum case and wi...
No. If you hold it upside down without shaking, does it fall out?
late crow
No. If you hold it upside down without shaking, does it fall out?
A little bit yes it moves a little bit and I have to be very gentle flipping it upside down it it does fall fully out but it does move a little bit out but not fully til I shake it or move it a bit hard or fast.
late crow
No. If you hold it upside down without shaking, does it fall out?
Does this help?
That’s how easily it comes out with friction pad.
late crow
it doesnt come out when shaken upside down in Calder's vid
Exactly idk why it’s coming out this easily with mine I’m also using Lekker V1 switches with 15G springs.
fallen pecan
maybe you missed a step during installation
tawdry tree
Is it seated properly everywhere?
tawdry tree
Exactly idk why it’s coming out this easily with mine I’m also using Lekker V1 s...
15g is crazy haha
late crow
Is it seated properly everywhere?
I believe so I pushed down on all the switches with my hands as much as I could
late crow
15g is crazy haha
It’s whatever the lightest springs Wooting makes gives me way less fatigue in the fingers vs the heavier switches.
tawdry tree
I believe so I pushed down on all the switches with my hands as much as I could
On the sides, between the plate and PCB, does it look good?
Not anything weird
like it not sticking out all the way
or a wobble
glacial wind
mine is definitely tighter than yours, could just be tolerances between builds
I wouldn’t really mind it being looser though because if anything it means yours won’t be a pain to take out and swap things
I already have some scratches on the inside of my optimum case from the tighter fit pcb scratching the wall when swapping out things on mine
tawdry tree
having to hold it down to take the caps off ain’t that great either tbf
late crow
This is what the sides look like with the friction pad on
late crow
On the sides, between the plate and PCB, does it look good?
I believe so
glacial wind
Could be tolerance differences between plates too. I’m using the 60he+ with a wooting black pc plate
So mine isn’t the stock plate
tawdry tree
I believe so
It looks good and even. Very odd though, especially because it’s specifically shown in the video.
People are gonna try it, and for some it’ll fall out..
late crow
Could be tolerance differences between plates too. I’m using the 60he+ with a w...
If it is tolerance the only think I can do is screw it all down into the case?
tawdry tree
No, just keep using it.
It’s fine but I would post it in #1141096226884956181 if you don’t mind.
late crow
It’s fine but I would post it in <#1141096226884956181> if you don’t mind.
I’ll do that
glacial wind
If it is tolerance the only think I can do is screw it all down into the case?
I mean if it’s tolerance yeah, but if it’s not falling out I wouldn’t worry about it
Unless you specifically use your keyboard upside down it doesn’t matter at all
midnight flint
Question. If you use the friction pad does that mean you can no longer use one of the sandwich pads?
tawdry tree
Question. If you use the friction pad does that mean you can no longer use one o...
Yes
the friction pad is the silicone pad though, basically
midnight flint
Alr thanks
tawdry tree
so you can’t use the foam one or nothing.
late crow
I mean if it’s tolerance yeah, but if it’s not falling out I wouldn’t worry abou...
Yeahhh you’re right it’s just when I saw the Wooting video of it it was not coming out at all like what if I was traveling with this I out it in a bag then when I open it back up it all comes out again or what if I put it in a traveling case then out the traveling case into a bag and opening it back up and it comes all out again.
inland jetty
where are the filthy geon raw users out here? xD
chilly mural
where are the filthy geon raw users out here? xD
hello
inland jetty
hello
Hello, good evening/morning/afteroon what are the actual noticeable difference if I may ask?
glass comet
has anyone tried the everglide rice pudding switches yet?
glacial wind
Yeahhh you’re right it’s just when I saw the Wooting video of it it was not comi...
I would definitely not travel with a keyboard in a loose bag even if it were a tight fit
Invest in a decent travel case for sure
chilly mural
Hello, good evening/morning/afteroon what are the actual noticeable difference i...
compared to what?
glacial wind
has anyone tried the everglide rice pudding switches yet?
They be bad
Well not bad but just awful for what they offer, which is a box stem that’s less stable than non box stem switches
glacial wind
i havent heard a sound test yet but people were saying theyre good
It’s just ‘feel’ reviewers who have no specs or tests and seemingly aren’t much of gamers themselves
When tested the rice puddings are more wobbly then most of the good non box stem switches and way wobbler then the good box stems
They’re just saying it’s good purely because it has a lower pitch sound, but in actual performance and feel it’s an awful switch
inland jetty
compared to what?
jade pros
i think thats the only worthwhile comparison at tghis point since the jade max are flawed
chilly mural
jade pros
Mmm don't know. I haven't tried jade pro. But I prefer geon raw sound more in sound test because of how close it sounds compared to sanwa button to me
inland jetty
It’s just ‘feel’ reviewers who have no specs or tests and seemingly aren’t much ...
this....they just talk about the typing feel xD
late crow
I would definitely not travel with a keyboard in a loose bag even if it were a t...
Alright will do
inland jetty
Mmm don't know. I haven't tried jade pro. But I prefer geon raw sound more in so...
honestly, the sound profile is so similar in reviews, raws seems clackier by a little but im more interested on how it feels during use and if there are any other noticeable differences during use
glacial wind
honestly, the sound profile is so similar in reviews, raws seems clackier by a l...
they feel really similar. Maybe very slightly softer bottom out on raw he, but not anything average person will notice much
wispy wharf
I might be stupid but I put TX AP screw in stabs in my 80he and they are uneven and loud
I put grease on the wire and krytox in the housing and idk what I fucked up
Could use some help
Somehow the ends of the keys don't depress evenly
I push one end down all the way and the other end can wiggle which was not the case with the stock stabilizers
I baby figure out why
Is there anything I can try to fix it? Did I get bad stabilizers?
glacial wind
what keycaps are you using
(also normally you don't use grease on the wire for tx ap)
wispy wharf
The stock wooting ones
It was loud even with grease
I don't know if my comment about the uneven press made sense
glacial wind
well loudness is just going to be up to the stabilizer not much can change there
it's possible you overlubed maybe
particularly since you're not supposed to use grease on tx ap
wispy wharf
Too much lube makes plastic louder?
glacial wind
no not the loudness, i mean more the uneven or stuck stabs
wispy wharf
How does it make uneven or loose?
glacial wind
because they're a tight fit and the grease might be making them not fit properly
but we can only guess since we have no video or anything to go by
fallen crag
Yeah, video would be nice
glacial wind
honestly stab diagnosing is pretty tricky, because so many things can influence it and with no video we can't really tell what's going on
wispy wharf
Ok I will take one tomorrow I need to sleep
glacial wind
it's also partly why I usually don't recommend people change their stabs unless they have issues with stock, because i think half the people run into more issues changing to 'better' stabs than just using the stock ones which were fine
fallen crag
Have a good night
wispy wharf
Just thought I'd ask before calling it quits
wispy wharf
it's also partly why I usually don't recommend people change their stabs unless ...
I was having rattling issues with the stock spacebar one
I feel dumb
glacial wind
stabs are finicky. Could even be you just put in part of it reversed, or one of the holes isn't fully inserted properly
wispy wharf
I am not sure what could be reversed but the holes thing might be possible
It would be on like all of them
fallen crag
Yeah, if ya shoot the video tomorrow, can u press them with the keycap on, so we see what u talk about, and then take it off and actuate the stabs
wispy wharf
That makes sense I just don't know what to be looking for in that stuff
sacred elm
seems like 80he cf plate from ali has some tolerance issues even with lekker v2s and raws
fossil panther
Are there any third party cases for the 80HE other than KBDfans?
fallen pecan
bone80
fresh badger
I've looked around a bit in this list but it seems like there aren't many options for ISO PBT keycaps, anyone have some more suggestions?
little glen
I've looked around a bit in this list but it seems like there aren't many option...
I can find a lot of ISO PBT caps myself
Just not a lot of ISO with lettering that isnt US/UK
fresh badger
Just not a lot of ISO with lettering that isnt US/UK
Yeah, I personally have a ISO French layout. I know the layout by hard tho, so I don't really care if the lettering is US/UK.
heady dragon
@fresh badger https://www.keychron.com/products/iso-cherry-profile-dye-sub-pbt-full-set-keycap-set-developer?variant=41711343501401 found those a few months ago, due subbed but still nice
And yea, iso fr is really hard to find, choices aren't aplenty
glossy pagoda
I've looked around a bit in this list but it seems like there aren't many option...
Unfortunately there are very few people in the world who enjoy ISO keycaps
ANSI > ISO
fresh badger
Unfortunately there are very few people in the world who enjoy ISO keycaps
Well, I assume I can't put on ANSI on my ISO keyboard
Or can I?
glossy pagoda
No they are physically different
glacial wind
Hello can how make 80he zinc most thocky
prayer and fasting for a miracle, because you need 'thocky' switches (which don't exist yet for HE)
otherwise there's some stuff that is highly not recommend and can make your wooting not perform accurately that will make it more thocky, such as PE foam mod
surreal edge
otherwise there's some stuff that is highly not recommend and can make your woot...
So making he thocky i mainly need thocky switches?
sacred elm
forget thock
glacial wind
yeah, for HE the sound is determined mostly by the switch. Unfortunately no one has figured out how to make a 'thocky' switch for HE yet
surreal edge
otherwise there's some stuff that is highly not recommend and can make your woot...
Why it isn't that much usefull? Or not so cost effective....tape mode work??? Wooting is 1st keyboard i use before laptop keypad
Its a biggest upgrade ig
glacial wind
if your follow up question is "what is the most thocky switch then?" the answer is it doesn't exist. There is deeper sounding switches but none of are what the custom keyboard 'thocky' folks would call thocky
surreal edge
if your follow up question is "what is the most thocky switch then?" the answer ...
For deeper sound what can do....
glacial wind
Why it isn't that much usefull? Or not so cost effective....tape mode work??? Wo...
because PE foam mod is the only mod i've seen remotely do anything to get it closer to thocky, but it messes with your wootings HE ability
glacial wind
For deeper sound what can do....
keep using the stock switches basically and put foam into your spacebar
that's 'thocky' for wooting (which isn't really all that thocky and is more of a deep muted sound)
surreal edge
Oka bro....i haven't got my 80 he yet....so idk how its sound
I check youtube sound test but i like to hear directly infront of me
delicate idol
I wish somebody made a keycap which can be put over the small ISO shift key and the backslash key on the left hand side. With key mapping on the wooting you could have a bigger shift key then as you can programme the slash key to shift key also. Only thing as an ISO user I’m jealous of on the ANSI layout is the bigger shift key on the left side. Surely it would be possible to do such a thing no? I know there wouldn’t be any stabilisers but still a cool idea.
mental basin
It'd probably feel weird to press against two switches under a 2U keycap, but definitely possible to do
untold wigeon
people who have the wrist rest 60 and the stock case how is it
in terms of fit/ comfort etc
forest crag
Can someone tell me if the friction fit pad fits the holy60?
sick shard
G.SKILL Crystal Crown Keycaps anyone got these?
keen mica
People reccomended sticky rice switches for 60he didn't they or is jade pros a better fit (ik it's preference im just looking for a mix of performance to quality)
glacial wind
People reccomended sticky rice switches for 60he didn't they or is jade pros a b...
jade pros. Sticky rice is bad
sacred elm
sticky rice
reef oar
who tryna patent HE tactile technology and make quadrillions with me
reef oar
paper bloom
who tryna patent HE tactile technology and make quadrillions with me
OKEY I COME IN XD DESIGNS TACTILE SWITCH just a normal leaf on the side of the housing
DONE
PATENT PENDING TECHNOLOGY!
sick shard
i went and canceled the crystal crown switches
keycaps*
and got steelseries prismcaps color white instead, i already got a steelseries mouse and headset
so this will be a nice addition to it
now we i gotta wait till i can avengers assemble everything
stone flax
sick shard
i went with the following,
Wooting 80 HE Module | PCR Ghost case| Geon Raw HE | Steelseries Prismcaps White
keen mica
sick shard
nice artisan
i am looking for a mushroom cloud explosion artisan for my delete key
know any?
something like this but then a keycap
tidal frigate
who tryna patent HE tactile technology and make quadrillions with me
Wooting does.
calm pulsar
HE tactile😭
cyan lark
HE tactile 😈
sacred elm
he tactile
chilly mural
hehe 
sick shard
Who is he?
sick shard
Woo Ting HE?
kind helm
open minded like a hole on the head or what :V
cyan lark
They will be.
sick shard
what do you mean will? elaborate plz
calm pulsar
just build a tactile MX board, it will sound better than HE🤠
cyan lark
It's not as straightforward to pull off as with standard contacts, but it is certainly feasible, and there's a gap in the market, and HE is gaining in popularity.
kind helm
i just think its like if you go with tactile, you want the activation happens at where the tactile bump happens. then the whole HE part is kinda jank
untold wigeon
What plate is best for wooting 60he? Pc, fr4, carbon fibre or keep the stock steel plate?
cyan lark
So I strongly believe that, assuming HE holds its popularity, tactile options will improve in time.
calm pulsar
i just think its like if you go with tactile, you want the activation happens at...
pretty much that
however I am looking forward to try those rubber dome tactile HEs that were shown earlier
cyan lark
If a tactile HE switch is created, its featureset would inherently be a superset of mech tactiles
A competent one*
I should say its capabilities
tawdry tree
seems like 80he cf plate from ali has some tolerance issues even with lekker v2s...
What about Jade Pros?
sacred elm
What about Jade Pros?
No clue, this isnt my vid. Jade pros are probably worse
calm pulsar
What about Jade Pros?
I found gateron were a bit less snug in geon made plates for venom, so maybe it is less of an issue with jade pros
oh wait
I misunderstood the issue on the kbdfans plate
stone flax
raw housings fit tighter fosho
calm pulsar
actually yeah it will be worse on gaterons
sacred elm
raw and lekkers are tighter fit yea
calm pulsar
ye
sacred elm
its so easy to pull jade pros, but torture pulling raws/lekkers on my 80he
tawdry tree
Not the pulling, just the wobble
calm pulsar
good thing black knight top housing on my switch is a tighter fit than gateron switches 
tawdry tree
Raws and Lekkers aren’t hard to pull out because they’re tight. They’re hard to pull out because their design is shit.
tropic urchin
I'll prob end up trying the CF plate first to see how bad the wobble is on pros
coping that it wont matter
calm pulsar
maybe there is margin of error
and it varies from plate to plate
or even from each switch spot
old swallow
nothing beats the feeling of pp
i love a hard pp plate yea
calm pulsar
anyone here beats their pp
kind helm
i never seen a plate cause wobble tho, doesnt the little thingy on the switch where you need to pinch with the puller kinda allow for the flexibility?
tawdry tree
..
tawdry tree
😂
tawdry tree
Am I doing this right?
10/10 execution
calm pulsar
kind helm
not wrong
calm pulsar
better call sno
sacred elm
💀
calm pulsar
I could get a custom pp but too much hassle rn, and I like alu and fr4 that I have anyways
kind helm
I have pp rn
from hypekeyboard? you think its worth?
i kinda want to try pp actually, everything else i am waiting on rn is either fr4, cf, or alu
polar girder
Yes
It’s been my favorite that I’ve tried between steel, PC and PP
I also have a nylon and aluminum plate I haven’t even tried yet cuz PP is good lol
calm pulsar
damn HMX switches wobble is nonexistent, very cool
yet they are smooth to press even from different angles
kind helm
you building your mx board?
calm pulsar
you building your mx board?<:SwitchyLaser:1272510062773927958>
still waiting for case and will be ordering a pcb soon
just trying the swithes in hand 😄
kind helm
nice
calm pulsar
feels kinda similar to my jade knights, just less thuddy since there's no magnet inside
sick shard
still waiting for case and will be ordering a pcb soon
just trying the swithes i...
i in the same boat as you
currently - my mood is https://www.youtube.com/watch?v=AN5RyeUzsso
watching the delivery busses
waiting for them packages 
calm pulsar
I do have my wooting on hand tho, this is a second build im waiting for hehe
sick shard
the pain is different
i got some motospeed keyboard i am borrowing from my bro
some chinese ck104 shit
i think it is a clone steel series
calm pulsar
i got some motospeed keyboard i am borrowing from my bro
it will be a huge change after you build your wooting
calm pulsar
i spend console money on a damn keyboard
well at least you will be able to play games
tropic urchin
atleast you'll get more than 30-60 fps on your PC
sick shard
i just calculated
all bells n whistles cost me 276,78 Euros
Wooting 80 HE Module | PCR Ghost case | Geon Raw HE | Steelseries Prismcaps White < what i got for it
stone flax
damn HMX switches wobble is nonexistent, very cool
which one are you using
stone flax
Wooting 80 HE Module | PCR Ghost case | Geon Raw HE | Steelseries Prismcaps Whit...
why those caps
rgb lover?
sick shard
yes
stone flax
rip
calm pulsar
which one are you using
geon extreme gaming
sick shard
i wanted something grey/white
stone flax
geon extreme gaming
oooh
ive had one good hmx experience
T_T
and it was with new molds
tropic urchin
geon extreme gaming
geon boxstem? 👀
cyan lark
Money is just a shared fiction anyway. Tell your landlord that.
calm pulsar
and it was with new molds
not sure how new these are, havent done a build with them yet, waiting for lx60 and probably will get venom MX pcb
calm pulsar
geon boxstem? 👀
no these arent boxed
stone flax
not sure how new these are, havent done a build with them yet, waiting for lx60 ...
im getting a neo60cu
sick shard
so the grey/white keys with it look like a gameboy advance + the pudding keys for rbg lit it up like a Gameboy xD
stone flax
but bowl boards are cool aswell
i was debating 60cu vs pangea mini
but pangea wait time and mounting options made me opt for 60 instead
-_-
tropic urchin
wait the geon extreme gaming is real? 💀
calm pulsar
wait the geon extreme gaming is real? 💀
yes lol
sick shard
how long have you guys been in the kbd modosphere?
stone flax
very sex
calm pulsar
<:SwitchyLaser:1272510062773927958>
wtf is this out already somewhere?
might have to cop
tropic urchin
<:SwitchyLaser:1272510062773927958>
that red is actually sick af
stone flax
wtf is this out already somewhere?
nope just renders of it so far
sick shard
cant we just 3d pring casings?
calm pulsar
probably like 500 bucks
stone flax
bananas
stone flax
i will buy
:3
unless it turns out to be horrible
but the 75cu was so nice
and this one comes with 2 mounting styles
fluid ravine
<:SwitchyLaser:1272510062773927958>
I just got edged
Quite literally
polar girder
how long have you guys been in the kbd modosphere?
Since I bought a 60HE two years ago and wanted better switches lol
sick shard
Since I bought a 60HE two years ago and wanted better switches lol
i was gonna go for 60he too, but then i remembered i am a programmer and the directional keys are musthaves
also what are stabilizers do, where do you connect those?
damn, why did i have to find these on etsy
fluid ravine
how long have you guys been in the kbd modosphere?
Almost 3 years
sick shard
sick shard
Almost 3 years
was your entry also with a wooting kbd?
fluid ravine
also what are stabilizers do, where do you connect those?
Stabilizers are used to stabilize big keys like space bar, shifts, backspace, and enter
Since those keys are so big, a single switch can't stabilize them on their own
sick shard
so they do not tilt to the right and left?
fluid ravine
So they use a big wire with two stems on the sides to stabilize them without the keycap having a seesaw affect
fluid ravine
so they do not tilt to the right and left?
Yes
sick shard
are they like those metal wires that old kbds used to have?
fluid ravine
Once one side is press the whole thing goes down
fluid ravine
are they like those metal wires that old kbds used to have?
Kinda but better if I know what ur talking abt
fluid ravine
was your entry also with a wooting kbd?
Nope
Gaming keyboards like HyperX were my first
Tried all sorts of them and all I can say
They're all shit
Just buy actual custom keebs and go through the experience of building one or having I'd say ¯_(ツ)_/¯
sick shard
i was gonna buy steel series apex pro tkl until rtings test said 80HE was better
but now i am going for prism white keys but these clear black keys on etsy look like they would match Ghost PCR case so well
fluid ravine
Just buy actual custom keebs and go through the experience of building one or ha...
Unless you want to get into the space of hall effect then yeah wooting is sick for building a "custom" while maintaining a good performance gaming keeb
Venom 60he is cool as well
sick shard
i was gonna get 60he, but not having directional keys and other keys like it, was a nuisance to programming
fluid ravine
i was gonna get 60he, but not having directional keys and other keys like it, wa...
Yeah I mean there are shortcuts like using mod tap to access it much easier but having it not there directly is a pretty big disadvantage to some people
fluid ravine
i was gonna get 60he, but not having directional keys and other keys like it, wa...
80he would def be the move then ig
stone flax
i was gonna get 60he, but not having directional keys and other keys like it, wa...
venom tkl time
fluid ravine
Or that^
sick shard
Its a Progragaming kbd xD
fluid ravine
I mean I would only buy 80he or tkl HE if I game and have a job at the same time that uses those f keys and arrows keys
cyan lark
All keyboards are programming keyboards
stone flax
Other wise if its just for a job then I would go with custom MX boards
bruh who is using he given the option to use mx
😭
sick shard
All keyboards are programming keyboards
that is true, but some are better then others
stone flax
he modding's only purpose is to make it as painless as possible
sick shard
oh, well with ai advancements i might be out of a job, then i can still enjoy the KBD as a gaming tool xD
cyan lark
Gotta specialize my dude
sick shard
Generalize is better, because AGI is not here yet
but they are pretty close with OpenAI model o3 i think
chilly mural
but they are pretty close with OpenAI model o3 i think
nahhh
AI only truly can replicate human if it can do thing it isn't supposed to do.
also not having slop phrases
cyan lark
Generalize is better, because AGI is not here yet
🤔
sick shard
it is not intelligence until it can get depressed and drink beer.
cyan lark
What would I know
sick shard
idk your name is TuringTest, so i assume you are either British or look up to Alan Turing?
or your also a IT person
cyan lark
🎯
sick shard
all 3?
fluid ravine
he modding's only purpose is to make it as painless as possible
The pain to go through modding them to make em thocc was a pain in the ass
fluid ravine
sick shard
if it aint thocc enough it aint thicc enough.
polar girder
i was gonna go for 60he too, but then i remembered i am a programmer and the dir...
Mod tap works great if you don’t have to hold down your arrows
sick shard
what is mod tap?
tawdry tree
One action for tapping the key and another for holding it down
sick shard
Nice Sweden, is nice place i want to visit 1 day
How is the weather in Sweden? right now?
is this arround the time to visit if you want to see northern lights and stuff like that
tidal frigate
Nice Sweden, is nice place i want to visit 1 day
Well sweden ot depends...
sick shard
Well sweden ot depends...
why Sweden is cool, its where vikings lived so its AUTO cool xD
Also, i think Swedish architecture looks amazing
Kinda same as Netherlands, but bigger and more colourful
tidal frigate
why Sweden is cool, its where vikings lived so its AUTO cool xD
I'am more talking about "population"
sick shard
what is wrong with the population?
maybe best we close off this topic this should be about modding
what did amaze me though is, i googled population such a big country but low population
do many swedish nationals live abroad?
tawdry tree
I'am more talking about "population"
the quotes 😭😬
polar girder
what is mod tap?
The greatest feature about 60HE
cyan lark
ST?
tawdry tree
Snappy Tappy
cyan lark
Ah
tidal frigate
maybe best we close off this topic this should be about modding
Not that type of population
sick shard
just spill the beans dammite
tidal frigate
Illegal immigrants
tawdry tree
😂
sick shard
illegal?
tawdry tree
THE QUOTESSS
sick shard
i think immigration is a problem we all face
tidal frigate
i think immigration is a problem we all face
In my country technicly not
sick shard
But we also have problems, with a aging population
no your problem will probably be invasion instead of immigration
may god be with you, i saw on news kids get taught how to use guns
tawdry tree
Let's not
x2 or in #💬│general
sick shard
anyway back to the topic, after going on a searching spree till 7 am in the morning
sick shard
x2 or in <#167181566978555904>
i finally found all the parts
tawdry tree
for real this time?
tawdry tree
If you like them, that’s what matters.
sick shard
all bells n whistles cost me 276,78 Euros
Wooting 80 HE Module | PCR Ghost case | Geon Raw HE | Steelseries Prismcaps White
but, now on etsy i found black transparent keycaps
and i am so tempted
tawdry tree
all bells n whistles cost me 276,78 Euros
Wooting 80 HE Module | PCR Ghost case...
That’s very decent
tawdry tree
but, now on etsy i found black transparent keycaps
omg 😭
sick shard
do i need stabilizers on the geon raw HE?
sick shard
also the profile on the keycaps is OEM is that far off from Cherry?
tawdry tree
also the profile on the keycaps is OEM is that far off from Cherry?
No, it’s fine
sick shard
i checked sideview of SA white jades those sucked ass too high
tawdry tree
OEM is just taller Cherry really
sick shard
thats fine
polar girder
RT > DKS > Mod Tap > ST
RT is on top. True. Mod tap incredibly usability function tho
DKS and ST idc about cuz CS2 lolz
polar girder
i checked sideview of SA white jades those sucked ass too high
SA so high but so good lol
stone flax
Dynamic key stroke?
I'm guessing
YA
fluid ravine
YA
How does it work
It's been 2 years yet I still don't know how that damn thing works LMAO
cyan lark
DKS? It just activates different keys at different parts of the travel down/travel up, either holding or tapping the keys along the way.
tawdry tree
RT is on top. True. Mod tap incredibly usability function tho
Mod Tap is nice but way less versatile than DKS. What do you use Mod Tap for? Only arrows or more?
weak inlet
i have hand lubed lekker v1 switches will GEON raw he if i hand lube them a improvement in sound? i am trying to find switch that sounds as quite as possible
tawdry tree
i have hand lubed lekker v1 switches will GEON raw he if i hand lube them a impr...
For quiet, definitely not Raw HEs.
sacred elm
Mod Tap is nice but way less versatile than DKS. What do you use Mod Tap for? On...
esc and ` in cs xD
for console
tawdry tree
esc and ` in cs xD
that’s pretty good
weak inlet
For quiet, definitely not Raw HEs.
what would you reccomend
green ivy
anyone know a good purple case for wooting 60he (not vey expensive) and a purple keycaps???
tawdry tree
what would you reccomend
Either Lekker V2s (quite an improvement over V1s) or Black Knights (if they’re available near you).
tawdry tree
anyone know a good purple case for wooting 60he (not vey expensive) and a purple...
What is not very expensive?
green ivy
under 100 maybe?
tawdry tree
Hmm
weak inlet
Either Lekker V2s (quite an improvement over V1s) or Black Knights (if they’re a...
can you link me the black knights i am from EU
tawdry tree
can you link me the black knights i am from EU
green ivy
or maybe a good case, i say purple because i like it but i don't mind, I want to start in the keyboard moding and I don't know what case is maybe goog for my wootinh 60
green ivy
tofu is the name?
tawdry tree
tawdry tree
tofu is the name?
Tofu Redux, where are you from?
polar girder
Mod Tap is nice but way less versatile than DKS. What do you use Mod Tap for? On...
Only arrows. What you use DKS for? Lol
polar girder
i read that SA you need to do more stretches
lol idk about that
I didn’t need any special accommodations to use SA but maybe I’m just built different 
sick shard
green ivy
Tofu Redux, where are you from?
Spain
tawdry tree
Only arrows. What you use DKS for? Lol
I used it to edit in Fort
weak inlet
https://keygem.com/en-nl/products/black-knight-magnetic-switch-10pcs
and do i need to buy 60 or 70 for my 60HE?
tawdry tree
and do i need to buy 60 or 70 for my 60HE?
weak inlet
and is hand lubing them also worth it?
tawdry tree
The 60HE has 61 keys.
weak inlet
any sound tests?
polar girder
I used it to edit in Fort
Ah gotcha. I played Fortnite for like a couple weeks and only no builds lol
I tried to get it to counter strafe for me but didn’t really work great.
sick shard
do you need to lube geon raw HE?
sick shard
i really do not wanna lube better leave that to diddy
tawdry tree
any sound tests?
Won’t sound the same as on your 60HE but you can hear the difference relative to the other switches tested in this vid: https://youtu.be/wYACSlhQg9E
sacred elm
why are you buying black knights xdD
tawdry tree
Ah gotcha. I played Fortnite for like a couple weeks and only no builds lol
Basically I use DKS to cheat in every game lmao
sick shard
this video made me switch from BK to GR
stone flax
this video made me switch from BK to GR
gr?
sick shard
Geon Raw
stone flax
lol
weak inlet
Won’t sound the same as on your 60HE but you can hear the difference relative to...
thx a lot
polar girder
this video made me switch from BK to GR
Raw are objectively a better switch
polar girder
Lololol
tawdry tree
I tried to get it to counter strafe for me but didn’t really work great.
Yeah it’s tricky, it’s possible but there’s a pretty big learning curve
green ivy
https://www.maxgaming.com/en/cases/tofu60-redux-e-purple
Thanks! How many time have you been in this hobby? I want to start but i dont know so much things only the basic
polar girder
Bro should I go JP or KoM?
sacred elm
im switching from gr to jp
👀
polar girder
Or other
sick shard
altough i do like the black colour of BK
sacred elm
fck
cyan lark
JP if you like rock & roll, KoM if you like jazz.
sick shard
what if you like soul?
calm pulsar
what if you like soul?
then it's JK
tawdry tree
Thanks! How many time have you been in this hobby? I want to start but i dont kn...
Not sure about how many times but it’s been quite some time. 😄
tawdry tree
Bro should I go JP or KoM?
KoM more interesting.
green ivy
Any one that have tried it, what switch i should buy to play games, the lekker v2 or jade pro, also i like that the keyboard do sound
tawdry tree
Jade Pros sound cleaner than Lekker V2s
cyan lark
I prefere lekker v2 for gaming over jade pro
But jade pro definitely sounds much nicer
tawdry tree
Any one that have tried it, what switch i should buy to play games, the lekker v...
What sound profile do you like more?
green ivy
The v2 sound similar to v1 right?
tawdry tree
That of the Lekkers or of the Jade Pros and Raw HEs?
tawdry tree
The v2 sound similar to v1 right?
Sound profile, yeah.
tawdry tree
😂😂
sick shard
then open your speakers watch switch videos
and if it matches the note you like
buy
green ivy
That of the Lekkers or of the Jade Pros and Raw HEs?
Yeah the sound of the lekker i like it
cyan lark
Open your brain and watch the clouds go by
green ivy
And for the price only for playing it would be better v2 or jade pro
stone flax
And for the price only for playing it would be better v2 or jade pro
RAW HE
sick shard
Raw He
polar girder
KoM more interesting.
Yeah seems better
sacred elm
half cipher
anyone know if the stock screw-in stabilisers on module are any good ordered my module appreciate the help
polar girder
Yeah they’re good
tawdry tree
anyone know if the stock screw-in stabilisers on module are any good ordered my ...
They are fine.
half cipher
I want best build possible you recommend aftermarket or are the stock ones the way to go?
tawdry tree
If they don’t sound perfect right away you can tune them.
tawdry tree
I want best build possible you recommend aftermarket or are the stock ones the w...
Tune the stock ones.
calm pulsar
Tune the stock ones.
nooo I want to spend money to tune a whole another set of stabs from the ground up and be disappointed😭
half cipher
Okay perfect appreciate the help thank you i’m a noob at all this 😂
tawdry tree
Anyone knows a mod that is easy to do and it is efective?
Effectiveness of the tape mod is arguable. The friction pad has a much bigger impact (if your case allows it).
gleaming crane
I purchased a salvation case about two days ago, any idea on how long it would take to arrive?
tawdry tree
I purchased a salvation case about two days ago, any idea on how long it would t...
From where?
gleaming crane
Salvun
polar girder
I purchased a salvation case about two days ago, any idea on how long it would t...
This is a Wooting discord
green ivy
Effectiveness of the tape mod is arguable. The friction pad has a much bigger im...
I have the wooting stock case
gleaming crane
A week tops for any countries close to Belgium.
Okay thx
tawdry tree
This is a Wooting discord
Maybe for his 60HE?
gleaming crane
It is yea
calm pulsar
This is a Wooting discord
sir this is a wendys
green ivy
Yes
green ivy
Yes!
tawdry tree
It’s an easy mod.
green ivy
Thanks, i am new at this 😅🫣
tawdry tree
Thanks, i am new at this 😅🫣
sick shard
i am gonna order these as backup caps from china
these match the ghost case i think
green ivy
https://youtu.be/6poF-Z0ajhE
Wow a lot of thanks!!
sick shard
cause if i do not like prism keys i can put in the chinese keys
and then return the prism keys
i think i managed to pull off a decent mod pack for a price under the wooting website
with the criteria that it has to be useable ASAP
grim trench
yo since I'm getting a 60he as a gift for someone. I was wondering though if I should also grab anything here if I'm planning on modding my keyboard in the future (delivery is like 18bucks so). I have a 80he zinc if relevant. Not sure if there's cheaper/better options for the modkit stuff closer to me in Sweden
sick shard
what does friction fit pad do?
grim trench
dunno but it's for the 60he
cyan lark
Hold the pcb in the case with friction alone, no screws.
sick shard
oh that is nice too
maybe later i might make a
60he travel board
how is the MDA profile?
grim trench
wait if I buy this can I skip out on getting the lekker v2 35g on my 80he and instead just modify them
ionic breach
wait if I buy this can I skip out on getting the lekker v2 35g on my 80he and in...
u got switch openers?
cyan lark
If you have other switches to put them in
grim trench
u got switch openers?
uhh, are they included in the blank toolkit?
ionic breach
yup
grim trench
If you have other switches to put them in
wdym?
cyan lark
Those are just springs. You need the housing and stem as well
grim trench
oh, I'd be putting them in the stock switches I got with my 80he
cyan lark
Oh, then yes sounds like you’re set
keen ledge
d
tawdry tree
uhh, are they included in the blank toolkit?
You can get the tools and springs from Ali as well if price is an issue.
grim trench
You can get the tools and springs from Ali as well if price is an issue.
As long as it's not overpriced I don't really mind. New to the hobby so don't know what I'm expected to pay for stuff xd
As far as the springs go I'm not even sure if I'll get them since I was considering getting the TTC magneto POM's
tawdry tree
As long as it's not overpriced I don't really mind. New to the hobby so don't kn...
It’s not extremely overpriced and the shipping from Wooting is quite a bit faster depending where you’re from.
grim trench
first I wanna figure out what mods I can do to my 80he and what effect it being zinc has on it. It seems like tape mod is one of the safe mods
Shipping is about 18 bucks for me, but since I'm getting a 60he+ as a gift to someone I was considering getting the blank kit as well for myself if they're worth it
sick shard
anyone win these ? https://www.jellykey.com/raffle
tawdry tree
first I wanna figure out what mods I can do to my 80he and what effect it being ...
It’s safe for sure but it doesn’t have a big impact. Especially because the 80HE comes stock with a tape mod, kind of.
grim trench
Do you know about any good mods for the zinc 80he that I could try to look up
tawdry tree
Shipping is about 18 bucks for me, but since I'm getting a 60he+ as a gift to so...
That’s a bit pricey but if you get it with the 60HE as well it’s fine.
tawdry tree
Do you know about any good mods for the zinc 80he that I could try to look up
Different plates and switches.
grim trench
okie
cyan lark
Fill it with sand/goo! (don't)
sacred elm
tawdry tree
okie
FR4 plates for the 80HE:
https://a.aliexpress.com/_EyROP4c
They have black and white.
grim trench
FR4 plates for the 80HE:
https://a.aliexpress.com/_EyROP4c
oh damn when you said plates I thought you meant case 💀
already had a zinc case so that was kind of out of the question for me
tawdry tree
oh damn when you said plates I thought you meant case 💀
Haha, nah
FR4 is a bit stiffer than the stock plate
grim trench
o what's the implications of that
does it matter what colour I get. can I even see it 
tawdry tree
Has an effect on sound
tawdry tree
does it matter what colour I get. can I even see it <a:ThonkSpin:431450659016146...
You slightly see it
grim trench
also if the brass or CF plate is worth it
tawdry tree
The stock plate is white
tawdry tree
also if the brass or CF plate is worth it
I like FR4 over CF personally
haven’t used brass
grim trench
oh now that I actually look I can kinda see the white
ionic breach
I like FR4 over CF personally
grim trench
dunno if the contrast makes it nicer or not
tawdry tree
but definitely noticeable
grim trench
damn does someone have images comparing the two xD
(like when they're on the keyboard)
ionic breach
damn does someone have images comparing the two xD
dont they have it?
sick shard
would you guys reccomend the palm rest?
ionic breach
(like when they're on the keyboard)
no lmao
tawdry tree
dont they have it?
he means with it installed
ionic breach
just picture it
grim trench
would you guys reccomend the palm rest?
wrist rest 100% yes
tawdry tree
hmm
sick shard
100% or the 80% for 80he?
sick shard
i also bought a monitor arm so my monitor can fly instead of stand on the desk
grim trench
my one complaint compared to the steelseries one I had before is that it's not magnetic so I have to adjust it a bit more
tawdry tree
damn does someone have images comparing the two xD
grim trench
I also got a dual monitor arm this year
grim trench
Stolen from night: https://media.discordapp.net/attachments/984799440072220692/1...
is there an image of the black plate on a black keyboard xD
tawdry tree
haha
grim trench
I have the black 80he zinc
sick shard
Nice
sick shard
I wanted the PCR frost originally but those do not come till feb
ain't nobody got time for that
How do MDA profile compare to Cherry and OEM?
tawdry tree
if I can find it
@grim trench
sick shard
sleek
tawdry tree
I liked black more
grim trench
I wonder if it'll make my cats white fur that somehow got under the plate stand out more though...
sick shard
white looks like, those dusty old keyboards
grim trench
they're not even allowed in my GamiNG RooM yet their presence is still here
tawdry tree
I wonder if it'll make my cats white fur that somehow got under the plate stand ...
That’ll be difficult to see but yeah
sick shard
that you saw growing up
tawdry tree
hairs and dust on black is more visible than on white
sick shard
true
grim trench
white looks like, those dusty old keyboards
don't diss my old apple pro keyboard I used as a kid, it's goated >:(
grim trench
also how do I even get stuff that gets under the keyboard switches out
sick shard
white tee prone to stains
grim trench
it's only like 2 pieces of fur so far but I bet it'll add up and give me brain damage over time
sick shard
you have to unscrew i think
ionic breach
the zinc is easier to open than plastic
sick shard
but i wanted frost pcr
ionic breach
tawdry tree
also how do I even get stuff that gets under the keyboard switches out
take off the keycaps and use a vacuum
it’s pretty fast to do
grim trench
take off the keycaps and use a vacuum
oh I don't have to worry about static electricity or nothing?
tawdry tree
nah
grim trench
and I don't have to take off the switches, just the keycaps?
tawdry tree
just the keycaps yeah
grim trench
cool cool
tawdry tree
you can take the keycaps off of one side only and tilt your board so the dust falls to that side
grim trench
and I can just wash my silicon wrist rest
tawdry tree
and I can just wash my silicon wrist rest
yeah
sick shard
woot
my switches on the way
ready to be shipped*
i think my Steelseries caps will arive first
Geon Raw He - 90 pcs
i did not know anything the community here helped me
and i was presistant started searching at 1:30 AM
and did not sleep till i finished build at 8 am xD
that is the Sweet Spot where Price meets Quality
what did it for me was i ordered a module and case and jades on wooting were 75 euro for 90
for that money i bought switches + keycaps
sick shard
cost me 276,78 Euros
Wooting 80 HE Module | PCR Ghost case | Geon Raw HE Switches - 90pcs | Steelseries Prismcaps White full set
dawn stag
does it make a difference if i add another layer even with the built in one
sick shard
does it make a difference if i add another layer even with the built in one
do you have pcr + geon raw?
dawn stag
yeah
sick shard
what is the sound you get?
dawn stag
kinda clacky but just slightly hollow
sick shard
a hollow clack
worthy rover
it sounded less hollow after tape mod tbh
dawn stag
it made a big difference for me when I did tape mod
did you do it on top of the factory tape mod
or just redo it
worthy rover
yeah 80he
I peeled off the film, 3 layers of tape mod, put the film on tape then the foam and closed up
i dont even know if thats a good order but honestly it sounded better afterwards
dawn stag
ive seen people replace the factory foam with polyfill too
sick shard
so you take off the film go right on pcb then after 3 layer tape you put film on tape
calm pulsar
you need at least 7 layers for most creamy thock
dawn stag
the hollowness could just be from the plastic case though
sick shard
i think he want a full tack
dawn stag
maybe ill get that pbtfans one
worthy rover
only the spacebar enter etc sounded hollow after my tape mod, so I ordered spacebar foam
until then I put painters tape in those keys
it helps a lot
dawn stag
yeah i have tape in my spacebar
calm pulsar
sick shard
what key caps you got?
might also be caps right?
so he got Geon raw he + 80he Module + PCR case
what are his caps
does the 80HE module come with cable?
which color?
i have ghost pcr
if its black or white
or gray it wont matter
when do you think we will have translucent full hd keyboards
not just rgb but straight up animating images with detail while being a keyboard
omg it already exists
flux already made it
thats even better
but this is it
wooting needs to make this
whats the point of a keyboard
Performance and the rest is all bragging rights
finalmouse keyboard is better for gamers
flux is more for work
tbh i would buy it then use 1 time then toss it
wooting gonna be my work horse and play horse
your right
might use 1 time and return then
cause it has a blurry picture
oh the keys make it look like that
i am comparing it to flux
that is clear to me
center piece looks like street fighter 2
i might buy both later
first quest is a RTX 5090 hehehe
right now i use a RTX 4080
thank you GFN
old sapphire
what the fuck are u playing?
sick shard
Geforce Now ultimate has RTX 4080
i am paying 20 bucks per month and i got fiber optic internet it runs so smooth like i have my own RTX card installed
the future is cloud gaming really mad
i got 8 ms ping
right now the geforce now runs on w11
imagine they partner up with valve and run the cloud pcs on Steam OS 3
why
steamOS is modified Arch Linux with Proton layer for windows compatibility
less Resource heavy
Valve is coming for Microsoft's Gaming Throne
Sony already pwned Xbox this gen
Valve gonna slam the nail in the coffin, as a True OS competitor for gaming
why you think alot of Valve Lawsuits are popping up Microsoft is playing dirty
vapid oracle
Hey guys are these any good for keycaps ?
https://mechanicalkeyboards.com/products/ducky-tuxedo-108-key-oem-profile-pbt-double-shot-keycap-set
tawdry tree
Hey guys are these any good for keycaps ?
https://mechanicalkeyboards.com/prod...
Fine
reef oar
idk, haven't heard anything bad about ducky keycaps
you get a free panda plushie though
tawdry tree
With an ANSI 60HE yes
vapid oracle
With an ANSI 60HE yes
Not the 60he+?
tawdry tree
Not the 60he+?
Yes, 60HE+ too. It just needs to be ANSI.
vapid oracle
Yes, 60HE+ too. It just needs to be ANSI.
Kk thank you
tawdry tree
Yw!
sick shard
Also because SteamOS is Linux Based it has greater Privacy that Windows
Linux shuts the blinds xD
craggy horizon
Is there any obvious things I should avoid when buying a keycap set? Like for example how these ones I'm looking at only say "PBT", rather than Double Shot PBT.
stone flax
Is there any obvious things I should avoid when buying a keycap set? Like for ex...
pbt is a material
double-shot is a proccess
craggy horizon
double-shot is a proccess
Gotcha. I would assume that PBT is not always Double Shot then in some cases
Hence the reason why the set is pretty cheap
inner wren
Is there any obvious things I should avoid when buying a keycap set? Like for ex...
So as far as i know theres Pbt and Abs keycaps. Pbt keycaps have a better quality and feel better typing on. Abs is a lower quality material and id say u can definitely notice if something's abs or pbt, pbt has like a texture on it while abs just has a smooth feeling.
calm pulsar
double-shot is a proccess
and gmk is a way of life
craggy horizon
Okie, ty. I'll avoid abs. I see more PBT anyway, so I figured that was the better one
sick shard
What are Polycarbonate caps?
stone flax
Gotcha. I would assume that PBT is not always Double Shot then in some cases
nope, can be single, double triple shot even, dye sublimated reverse sublimated pad printed uv printed, plain blanks etc etc
craggy horizon
The hole goes deeper than I thought
sick shard
double shot has a innershell and out shell
inner wren
Yeah
calm pulsar
noticed a fuckup on keykobo's website
calm pulsar
double shot has a innershell and out shell
in gmk caps the outer shell is part of the stem, which is different from the pic above
calm pulsar
when I compared pbtfans and gmk I liked the typing feel a bit better on gmk, it felt a bit less dampened, a tiny bit more feedback, but it is probably insanely small difference
the latter is probably closer to dyesub/blank feel
since the stem part is the same as the main outer shell
inner wren
How did u guys get that role btw?
calm pulsar
How did u guys get that role btw?
check announcements
stone flax
does it sound better?
theyre just different processes that usually entail different materials and thicknesses
sound is preference
abs runs higher pitched and livelier (or thinner if done badly) depending on composition and thickness
inner wren
check announcements
Tyy
stone flax
for pbt its deeper or more muted given thickness
inner wren
check announcements
Going to win the giveaway now 🙂↕️ LOL
inner wren
https://www.keykobo.com/products/in-stockkey-kobo-cherries?variant=5071351998086...
Id love to buy keycaps like these but i dont have no money for that
stone flax
Id love to buy keycaps like these but i dont have no money for that<:dogekek:113...
buy clones
its the ethical thing to do
or just buy cheaper caps
or do aftermarket
pretty easy
i know a cherries clone lol
raw ivy
buy clones
clones feel so odd
stone flax
if u wanted that exact set
inner wren
or just buy cheaper caps
I am honestly theres no really good ones i like when buying cheap ones
stone flax
I am honestly theres no really good ones i like when buying cheap ones
wdym?
calm pulsar
clones usually have ugly legends, unless it's an exact replica
even then probably not as sharp as actual keykobo or gmk
sick shard
what do you call the odd shaped keys on a keyboard
i am looking for artisan replacements for them cause translucent on them will look crap
stone flax
clones usually have ugly legends, unless it's an exact replica
thats literally down to the clones tho?
and ofc if it was kkb or gmk quality, then itd be gmk or kkb pricing
sick shard
anything from ~ to left CTRl to Right CTRIL going back up to backspace
stone flax
modifiers
calm pulsar
thats literally down to the clones tho?
fair, I've only seen ugly clones on aliexpress tbh, like they would have a similar color scheme but with some different stupid font
stone flax
fair, I've only seen ugly clones on aliexpress tbh, like they would have a simil...
case in point
20 dollar darling clones
calm pulsar
now that looks nice
inner wren
now that looks nice
Was about to say that they look great
inner wren
Im thinking of buying these but idk if theyll feel really cheap or not
stone flax
inner wren
Its 45 euros
calm pulsar
45 oyros for that...
flat cobalt
You have to buy authentic
inner wren
Yeah..
calm pulsar
ngl I think its overpriced
calm pulsar
You have to buy authentic
it should include this actual anime girl in the package
inner wren
it should include this actual anime girl in the package
Exactly
calm pulsar
damn I want this cherries set
bright palm
clean
calm pulsar
i want this set
is it beige or white
sick shard
how the keycaps of 3dkeycap.com
calm pulsar
sick
calm pulsar
how the keycaps of 3dkeycap.com
wait they are made of resin?
sick shard
yes
inland jetty
what do u guys think for the raw zinc 80he
calm pulsar
looks kinda more beige than the white background
stone flax
calm pulsar
love the beige
bright palm
anyone have a nice set of caps, blueish theme?
Im struggling to find a set that fits my setup 😄
bright palm
The blue/blk/pink one
inland jetty
do you think the grey/green is ugly?
calm pulsar
for me 1st and 2nd are too low contrast, would be weird looking at them probably
inland jetty
atm, the blue/blck one but the green one is kinda interesting
bright palm
i think the blue blk will make a nice and subtle contrast to the raw zinc
inland jetty
i think the blue blk will make a nice and subtle contrast to the raw zinc
im thinking of that with the novelty keys so i can get those paw keycaps
stone flax
anyone have a nice set of caps, blueish theme?
too many
bright palm
send them over :d
stone flax
be more specific
inner wren
How about this the letters are white but would they look good on a black case?
stone flax
striker, mizu, nautilus, nimbus, prussian blue, rudy, shoko, space cadet, blue samurai, trackday, 8008 bl00, classic blue, masterpiece, etc etc
@bright palm
bright palm
ill check them all out thanks!
I have a blue themed desk mat, dark wooden countertop desk
inner wren
Ooo can i see? Idk if u can send it here
inner wren
I have a blue themed desk mat, dark wooden countertop desk
Can u show me in dms?
calm pulsar
ofc you can post it