#🔧│keyboard_modding
1 messages · Page 330 of 1
who made this 💀
BadSeed Tech wrote a "Ultimate" guide to modding Wooting 60HE;
- Should I worry about lekker spring magnetism? 🤔
- Is it worth conformal coating the Wooting Two HE PCB for more reliablity?
- I bought the wooting switch opener, doesn't appear to be the gateron opener.. 😦
- What kinda "burger" oring should I use for the screw mounts 🤔 4mm x 1mm x 1.5 mm ones?
- Tape mod: Is it always painter tape.. ? Can I try other tapes like kapton, or super 88 series electrical tape? Is there a concensus on how this affects the sound of the switch key presses?
- Is it worth installing the tripod switch pads?
best keycaps?
lol what?
Ex Topre fan here. Sorry if I overwhelmed you? Just asking for opinions.. 😵
- Lekker Springs are already nonmagnetic (pretty sure any HE switch already has nonmagnetic springs lol)
- I think wooting already has some type of coating on their pcbs already
- Well yeah, it was never really advertised as a gateron opener
- I believe those are the right ones
- No it's not always painters/masking tape. As long as it's not conductive or anything super sticky it can work. I use moleskin tape myself for a deeper sound.
- I have switch pads installed but I honestly forgot how much of a difference they made. It doesn't hurt to really try though since it's a few bucks (shouldn't affect performance as long as it's not that thick)
So this just happened should I just buy a new board I have to bend the connection really far back to make a contact so I can’t use the existing usbc plug. Luckily the pads are not stripped from the pcb just looking for recommendations
I have much to research. I wish the wooting two he had a side mounted usb c connector. But it appears to be a wire that's mounted onto the center bottom. Which will make custom made usb c to usb a cables hard to use.
Would recommend sending an email to social@wooting.io about that one
I can't tell in the pic. But is the PCB cracked? If that's the case. You might need a new PCB. You should be using a hot plate / hot reflow station for large reflow mass connectors like that.
USB port
Feel off
No it’s not cracked and the pads did not come off.
Yeah I know
I'm telling him not you
That's crazy.
Link this pls
GMK evil dolch acquired
went with the 60% base kit for my wooting and got the shine through set for the caps lock
Check out the Fractal Design Meshify Lite case here! - https://bit.ly/meshifylite
👇 PULL IT DOWN FOR THE GOOD STUFF 👇
Finally getting under the hood of the Wooting 60HE. We're gonna talk best practices for the Lekker switch, swap it into a Tofu60 case, we'll talk stabilizers, case dampening, and how to get the best sound out of your keycaps.
✅T...
I wish the wooting led was south facing so it would fit the shine through caps better, but hoping it will still work okay
Follow K5 to R55 to R9 looks cracked to me.
Line the inside of the cap with mirror film
hmmm
It should still work fine if it's not at 100% so it spills everywhere
but we'll see
watches one Optimum Tech video
anyone here have a shine through caps they can test it with the wooting? lol
just the LED on the caps
I do
black snail
tbh not that bright
On the north east and west sides. Leave south alone. Could help
If you'd be willing to test just an LED that turns on when you have caps on that would be great
cause rgb is on the other side
I might try that tbh
let me find a pic
thanks
also I'm assuming if you rotate the switch it doesn't really change much eh?
cause the LED would just be blocked more
I have a south facing side legend set. It’s super dim even at 100%
probably will be even worse
that's not too bad tbh
I don't want it super bright just wanna be able to notice it
yeah but at some angles can be kinda worse, but yeah you can def notice it
Regardless of rotation the stem / housing will block the lighting, looks solid as-is.
that 60% base set for gmk evil dolch is such a good deal
I'd love to see more like that

yeah I figured
it probably would not happen
@cold bloom evil dolce is top legend right? Or are you looking for side?
Is it just for caps lock?
Yeah yeah ok. Got it now
I really want a stepped key. Looks so nice
evil dolch deskmat is very cool lol
these don't work on wooting layout sadly, the stem is in a different place
The switch is, yeah
I know just hoping
I ended up grabbing two ED sets, such a good colorway
it just works so well
I love dolch already but this is easily my fave dolch
I wish they'd make an adapter for stepped caps on regular caps position if you still wanted to use it, there was a geekhack post about a 3d print file once is the closest I could find
I really like the Gloves x Domikey HX-20 keycap set too, it's just $$$$
@untold wigeon https://geekhack.org/index.php?topic=88378.0
[IC] Stepped Caps Lock Adapter - GMK/Cherry Profile
Yeah I read that also. Seems to have died
https://www.youtube.com/watch?v=G_8KvxfJjgA woo finally
안녕 It's Mikey here! Thank you so much to @Wooting for sending me the Lekker V2! The newly upgraded Lekker V2 which is to have much less wobble and better sound lets test it out and compare it to the Dash, Geonworks and the Lekker V1s!
Mods Done to my Wooting: Alumaze Case, PC Plate Switch, 2 Layer Tape Mod
Lekker V2: https://shorturl.at/oT6...
Yeah, you end up sacrificing a keycap lol. I will see if there's a 3D print file
oh, thanks, didn't notice
yeah good point, but if it was a set like gmk evil dolch I got as a 60% only I wouldn't mind
also gmk ed as an acronym for this is wild i just realized LOL
ngl
the lekkers kind of sound
scratchy
That's also a shit vid filmed with a phone.
I'm sure they are exactly like V1 except less wobble and more lube like they mentioned.
nah v2 is alot better from v1 though
still prefer the sound of raws tho
cause it sounds so clean
I think the v2 and v1 sound "similar" but the v1 is much more chattery sounding
I still prefer the jade and Raw HE sound profiles esp when you spring lube jades but Raw HE just sounds so clean to me overall
Jades still kinda have a bit more spring noise even when lubed I find
jade's bottom out is also different due to semi-closed bottom on the raws
If Jades had a milky top like raws they would be really good
I think you're right
Jade's have a weird resonance when "topping out"
like a marble reverb
fits with their sound that they are going for so its fine

84 for ANSI, 85 for ISO. Getting 90 would be best so you have a few spares.
Blessed are those who walk the path of geon raw he, for they shall inherit the kingdom of heaven
how fast is shipping from geon for raws
casts Consecration
cause not that big of a difference with the coupon code Geon so graciously gave
free ship slow'er' ship
you could get ed at the same time
it's uhh 5 day shipping for divinikeys
even if you dont want it you can sell it
Erectile dysfunction was also a possibility
That is what would happen if you didn’t buy the geon raw he
Send Woot an email asking to buy a replacement USB C port, then repair it yourself or get it repaired by a local repair shop to you. Shouldn’t be expensive at all.
I'm excite for the clear jades, prob make the 80HE RGB look disgusting even though I'm not an RGB'r anymore
Only Lekker switches support .1mm 🗣️🗣️🗣️
Would geon honor the coupon code on my raw he order that i made on august 29th when the coupon didn't exist?
well heck it's not like I play competitively anyways-
This is the reason why coupons are a pain.
you could ask
but this kinda things ive only seen by wooting
Some shops let you do that, like buying an item before it goes on sale
being broke 
what tha
😭
sell your coupon LOL
Think of the $12 extra you paid as donations to the temple of geon
Glory to geon and the raw he
Ask him for money off since the Geon logo is off center on the top housings 
oh and .48 cents per mag switch is insanely cheap
is it actually?
I’m surprised pochizo didn’t order an 80he honestly
oh I didnt order anything yt
Not much else to spend that store credit on unless you buy another 60he lol
ya
You could wait on that as well.
yeah just mostly waiting rn lol
It’s off center on purpose. That’s art. What a great artist

Glory to geon and all that he touches
Looks like the G / mold is off or different
looks like its cutoff
fuck you
reeeee
😂😂😭
how you even spot that shit is impressive tbh
do kenokeys keycaps work with the wooting???
also who the fuck?
lol
LOL
Any keycaps that fit cherry MX work
Mr Coochie Clapper 🍆
dad is that you
thank u
I have a sacrificial set I can send.
LOL if I ever try it out I'll let you know
are 4mmx1mmx1.5mm the right size for o ring mounting
If youre talking about burger mount Yes
thanks
Sacrificial GMk set to be specific. eBay let me keep the set my wife got me that’s missing caps.
Gotta find it 🗿
oh right I forgot that happened lmao
Yes
@glass comethttps://www.amazon.sg/dp/B08F2HPLG3?ref_=mr_referred_us_sg_sg&th=1
Yeah eBay said not to return them then the usps wanted them for investigation purposes and now they are sitting in my back room. Missing the “ key. So they are pretty useless.
thanks
this will fit with the tofu60 right and wont misalign the port @paper bloom
Bento R2
I have joined the Raw HE (50g) gang. So far I have enjoyed the sound and feel better than the Lekker V1.
nice
that set is really nice on the new raw emerald redemption
Would’ve been lol. I really love that set but where the hell am I supposed to get 1 “cap
LMAO
It is! It’s one of my favorite sets.
Mine is the all blue
oh nice
yeah I just saw that pic
Yee
How bad is the abs shine on gmk sets
I heard it starts after like a couple months rip
All sets no matter what material will shine
Mmmm right
My Devoted set started shining after a month or so. Wasd shift and spacebar
Get what you like
Gmk too expensive for me
Yeah it's hard to see if I like it just with videos you know hahah
as long as the legends don't fade I don't mind shine at all
I think it looks good over time
If you want a set that holds up get Cerakey
Mmm yeah I heard cerakeys have issues tho with 50gr switches
V2 specifically
Got a set when they were on Indigog or Kickstarter can't remem, sold them in about three days lol
Just the spacebar
Hmmm right
V1 had a lot of problems. V2 is light years ahead
Coz I got a full set of geon raws at 50g and was worried it would be too heavy
Nope. Just the spacebar
Do you have longer screws?
The stab keys and shit were awful. And always having to re-apply the little slivers of PTFE tape
incredibly touchy
Yeah those problems are long gone
So I think I should just get another switch that's 80g just for the spacebar?
Yep
Are you doing a O ring mount on your PCB
Very cheap magnetic switch.
Apparently they are clearing out their stock.
Another spring rather
^
Any recommendations?
I recommend 100g but 80 is fine
there's a ki don etsy that sells a switch with a pen spring in it claiming like 400g or 600g lol
use dat
Ah I see
If youre talking about friction mount it wont work @glass comet
im talking about burger mount
So I should open the switch and get a 80 or 100g spring right
I got the wooting spring set.
Then yes it fits
Ok I'll keep that in mind
ok thank you
I bought a ton of bulk springs off aliexpress a year or so ago
Spring has to be non magnetic. Be careful. That’s why I got the set from Wooting
Which switch is it? I see a switch puller when I click the link 😅. Taobao is hard to understand.
@glass comet do they have 3x1x1 O-Rings as well wherever you’re ordering from?
burger mount bad
Wow! Another Sticky Rice recolor!
Ok easy
I'd have to lube the spring wouldnt im
I?*
@fresh citrus you can get 10pcs as well if you send the seller a message.
I would
Might as well.
you could buy more keyboards as well
I trust that seller I linked. I worked with them when the 60HE came out, they were making Topre springs and I was begging them to start making mag switch springs lol
Does the 80he module come with switch puller?
That's true but I kept my razer black widow for 12 years hahahah
getting a lube kit for just 1 keyboard sounds not efficient
Binned it the second I got my 2he
Yeah ikr
I still have these too 😄
Cerakeys look nice but I heard they can be slippery AF for gaming but hmmm
If ur pfp an osrs reference bahaha
Is*
Here's best burger mount setup https://www.reddit.com/r/MechanicalKeyboards/comments/13k2z8m/burger_mount_endallbeall_setup/
Disagree. You should be lubing your switches more than once
true buy multiple sets of lube case while ur at it
Not true. People say that but it is nonsense
Mmm okay good
Just need to chill out a bit since I just spent $550 on the keeb and all the accessories so far already
Yeah they’re fantastic, no problem with custom orders/amounts as well.
Yes.
That could be sick, plateless with RGB to “charge” them.
my old first gen 60HE in the back too
those GID switches and stabs are god tier, they aren't like any of the recent year glow in the dark stuff, they are full blown insanely sensitive, insanely bright GID.
im sure this has already been said but the v2s feel lovely
their switch game is about a year or so behind.
still nice to see 🙂
https://awekeys.com/products/fullmetalkeycapsset?variant=47271416824089 what are yall thoughts on these keycaps on the 80he?
Upgrade your regular mechanical keyboard to a full-metal, gold keyboard masterpiece with Awekeys Full Metal Keycaps Set. Designed by Cherry Profile Keycap, Best keycaps for Thock. Transform your key cap into a symbol of sophistication and style. Gold keycaps, Titanium Keycaps, Gaming Keysets, Custom keycaps and more.
it's not a widely liked option
but if you like it why not
there are heavier springs for such cases
Heard of many issues getting them to fit switches and even then it's very difficult to make the spacebar not rattle a lot, I wouldn't especially for the price personally
sleek design
it should be fine
the weight
but if not you can get spring packs
Prices isn’t too bad considering how much a full set of abs ones are these days just the quality control scares me
are there any wooting sound tests with them?
I think so
a few here have them
I imagine they sound super loud w/ closed bottom switches
and just noisy with open bottoms
I haven’t been able to find anyone with a post on Reddit or YouTube with a wooting & these particular keycaps
searching awekeys on here I immediatyle found a test
I found this that’s it
oops
I'll get sick of it
Yeah I thought it would’ve sounded better
I think if you must go for non plastic keycaps then cerakeys are better
Well thank you back to drawing board I go
what were the metal keycaps taeha did a build in a bauer with
the spacebar sounded like a samurai sword it was wild LOL
I can say I've touched Linus' hands now
▼SHOW MORE for Keyboard Specs & More!
Keyboard: Bauer (Battle-Scarred custom cerakote)
Plate material: Brass
Keycaps: Salvun Brass Keycaps
Switches: Gateron Blacks
Lube: ???
Stabilizers: Genuine GMK screw in, lubed and clipped
CHECK OUT MY SECOND CHANNEL
https://www.youtube.com/TaehaSnipes?sub_confirmat...
bruddah
salvun brass keycaps
its right there
damn it does sound good tho
sounds really cool
but I'm sure it wouldn't be fun daily haha
how did it happen?
brass plate brass keycaps
damn
Brass plate
bruh, no dark coloured pipe included
I kinda prefer the lighter coloured pipe key personally
but I know what you mean lol
dolch r5 is the same
unless you use split backspace
split backspace >>>>
keep staring at long enough and you'll wish it was dark 
lol nah

dolch looks better on heads anyways
ooo thats nice
*not mine lol
nuffin, just ate a shit lunch and now I wanna sleep it off
shit what time is it for you lol
15:15pm
Which switches for the 60 and 80HE produce the most thock sound? I went with zinc alloy case for my 80he but still want a deeper sound if I can help it with mods n stuff
Good
Black Knights and Lekker V2s.
Don’t need to do any mods really. The 80HE is filed with foam already.
do you guys think poron switch pads would be a good addition to the 80he?
no not really
I was thinking about getting them to make the keyboard sound even deeper
wondering if it would be "overkill"
guess I will just try and see if I like it
yo im cheap and i dont wanna buy an expensive keyboard case would I be voiding my warranty if i spray painted my stock case a different color?
the warranty of the case ya
so ur good
unless ur case spontaneously explodes then idk
ye
alright thanks man
wut colour u thinking? 👀
ngl i want to try black 3.0
terrible idea, still want to tho
why?
tbh if ur spraypainting it will probably be ok
ye mayb
im gonna prac on a few test mice tho before i decide to do anything fucked up to my wooting
I doubt it’d be a big difference if at all. They’re very cheap though so you can try it and see how it goes. 😊
exactly what I was thinking :p
You can see all of them if you open them in the application.
Or, I think you can see it in your browser if you log in.
You can see all of them if you open them in the application.
Or, I think you can see it in your browser if you log in.
I bought it👍
do you have to lube hall effect switches any different to like a mechanical switch
?
Ive been told by this https://www.youtube.com/watch?v=WN_-GYLTfpY&t=101s
Always wondered how you can lubricate your lekker switches or grease your stabilizer wire. In this video, we will deep dive on different methods of lubing and some general tips and tricks. Using the Wooting 60HE.
Krytox GPL 205G0 and Molykote EM-50L lubricant:
https://region.wooting.store/products/lubrication-set-krytox-205g0-molykote-em-50l
:...
Ive been recommended to only lube the stem of the switch
I want a more thocky sound
would lubing it more give a big difference?
waiit
my gateron jade switches are pre lubed
should I still lube them?
hello, so I was told about the code WOOT for a discounted price on raw's does the code also work on divinikey website? or just the official GEON site?
you can go check it out yourself, no?
yea, im just a bit lazy
yk what
you're so right
lol
yea nvm doesnt work :(
is this real or a copy? i swear there isnt a variant that doesnt have icons https://diykeycap.com/en-au/products/klein-blue-keycaps?variant=43707215413469
Cherry Profile ABS material (the space key part is PC material) double shotinjection molding process A full set of 140 keys Note:The inner layer of the keycap will have injection plastic points. This is a necessary injection molding point for dual -color injection molding technology, not keycap defects.
i thought they all looked like this
hrm sold my 60he, now to decide what to replace it with
Geon just sent me the Raws switches today!
mine too woohoo
i just dropped $211 for these...
they are tasty tho...
211 💀
sorry guys
but yes
like the same price as cerakeys lol
but at least i dont have to stuff around with springs or anything lol
where did you find them for sale? iirc they're sold out in most places now
venom60 pcb in unikorn
i sold my 60he for no loss, but it only gets me 1/4 of the way to just the unikorn lol
hold up
Designer Inspiration Whenever the Kabuki-cho shows up in all the Japanese novels, anime, and movies I have enjoyed, this scene could be different every time in my imagination. It is the irreplaceable landmark of how a nightlight city like Tokyo could be. Sometimes that is the hustle and bustle you ever want to fit in.
its one of the vendors on the kbdfans site
oo i could do frog mini leggera cream and combine with my osume dalgona for full cream board
that might be the play
mini leggera isn't until january delivery though so a bit aways
leggera is cool, pessante tho 
i think i can't justify pessante for my travel board lol
fair 
It is a brick
oooh
part of me just likes to justify the osume dalgona kit I have had sitting in a box for 1 year now
at some point in time when I do buy a cream case it will be justified
using 2 purchases to justify each other 
to be fair, you probably can sell the keyboard for equal or a little extra
yeah i didn't lose anything on the 60he itself. Lost a bit on the case and keycaps but they were cheapie case/keycaps anyway
think that counts as a win for a 1 and a half year old board used daily
this is the way
what keycap set is that on the background?
I also bought X-RAY keycaps
theyre beatiful
we got frog mini alu plates for clip in stabs 
when you got those raw hes though
but thank you for the plate 
when we get money to buy them

we poor
buy more from us please
well I'll be buying the evil dolch base kit soon

where WKL Wooting
i doubt wkl will be a thing on wooting
@elfin garnet yo what’s the word on that monitor?
yo, anyone knows a good place for usb c cable for the wooting? germany or eu
ngl they look so low quality idk
Well if you're looking for some more expensive options https://keebstuff.com/
oh swagkeys changed their v2 stab metal from gold
now it's just normal metal color and new package
changed from plated to unplated now. I wonder if tolerances or anything else changed there
Wish someone linked me this before I bought my wooting cable lol
those are slightly different price bracket though lol
I made my own USB C to A cable with LEMO connectors, it looks cool 😮
Looks more premium, price wasn't an issue for me personally but yeah very true lol
honestly i think wooting would sell way more cables if their options aren't all 2 tone
a lot of people want an all white or all black cable or even 2 colors but not wrapped around each other
Agreed, you should send one of those post card things 😄
The stock wooting cable sticks out like a sore thumb on my build, gotta switch that out someday
Exactly why I bought the stealth version, plus you get a lil discount if you already own a wooting board
on plus side the wooting version may not be sleek all black but it's at least going to work with tachyon mode + rgb at max
a lot of those custom cables won't run max brightness rgb + tachyon (not that most people use full brightness though)
Dang I liked the gold. RIP
Yeah I lamented dropping cash for a custom cable but now that I have it I’m really happy lol
Seems weird that the box art has the big gold lance but comes with a silver wire
😵💫
it might be a little better maybe though as far as tightness
if they're using their own wires now that they sell separately, i know theirs are supposed to be 1.65mm instead of 1.6 for the c3 equalz wires
maybe means a little less wiggle if so?
Let us join our hands and prepare to welcome a new disciple of the geon raw he. I sense his presence incoming
anyone know what switches have a better tightness than others?
😭
Frog look so derpy, truly the hero we needed
oh hello! Geon raw he is the tightest stock switch right now for wooting (you can hear soundtest in latest wooting youtube video)
https://geon.works/products/geon-raw-he-switch?variant=44485640388771 (discount code woot to help save on the high shipping cost thanks to geon himself)
GEON RAW HE Linear Switch 2pins Switch Type – Linear, LubedInitial Force – 27.0g / 36.0g / 45.0gBottom-out Force – 40.0g / 50.0g / 60.0gSpring Length - 15.0mmSpring Type - Single-stagePre Travel - 0.1 ~ 3.3mm (Analog)Full Travel - 3.4mmTop Housing Material - PCBottom Housing Material - NYLONStem Material - POMMounting
didnt even know this existed
they're very similar to the gateron jade sound profile, but tighter stem wobble
You’ll get a lot of news on switches here
we also have daily prayers of thanks to geon here. Blessed be geon and all that he touches

Well idk if the tape mod helps for the two he however I am almost done with it
sounds like you want geons new group buy too lol
delivery won't be for awhile though for his gmk groupbuy, but his gmk evil dolch is some of the highest quality keycaps you can buy for the price in that color combo: https://geon.works/products/gmk-evil-dolch-the-split
GMK Evil Dolch - The Split by GEON, S3LQ Sales Method - Group buy purchasing- Unlimited Group Buy Timeline - Start Date: September 5th- End Date: September 15th (to ensure quick ordering) Production Timeline - 16 weeks after Group-buy Closed- There may be slight delays due to shipping and packaging to each vendor.
$40 for a set of keycaps from gmk for 60he is a great price
50g is what i'd go if you're not sure. 60g is roughly what stock lekkers are
yea thats insane ngl
Next week we cop 
thats interesting its crazy bc i thought the only switches that can be used is the ones on the wooting site
nah there's a whole bunch of options these days, although geon raw he is definitely the most popular right now due to it's sound and tighter stem while still being fairly cheap
The list of compatible switches is growing 
is there a reason y u recommend the white ones over others?
they're just the tightest stock switches for wooting right now, while also being one of cleanest sounding ones at same time
or ig hall effect over the raw zeros
61
usually folks buy 65 or so to have a few spare
(62 for the iso layout) but yeah good to buy a few spares like sno mentions
is there any possibility that wooting could sell their parts/mods to other retailers like kbdfans? very expensive to ship here from the EU so a china warehouse would be nice
Tell you what I'm gonna have a lot of v2 lekkers soon 
👀
how do these compare to the v2?
There's a sound test Sander uploaded not too long ago testing some of the more popular options against each other in the 80he https://youtu.be/wYACSlhQg9E
Time for custom switches! I tested the Geon RAW HE, Gateron Jade, GUGU Black Knight, and our very own Lekker V2 to compare their sound profiles. All of these switches are compatible with both the 60HE and 80HE.
Lekker V2 L45 https://wooting.io/product/lekker-switch-l45-v2?Size=70+pack
Lekker V2 L60 https://wooting.io/product/lekker-switch-l60-v...
they are tighter than v2 according to folks who have both
v2 not bad tightness wise though, just that geon raw he are a step tighter
i see appreciate the help
So my magnetic jades come in, and i was wondering if there is much of a difference between the jades and the WS Dashes.
ik the dashes are mainly just a recolor but is there any noticble differences other than color?
Sheeesh, wasn't it just the ks-20's like a year ago lol
dashes and jades are literally the same switch
okay thank you thats all i needed
Anybody know where I can get those spacers they are providing with the jades switches?
wooting provides not spacers, but longer pole stems for stabilizers
spacers are made by geon
you can find them on his website or some other vendors
are the longer pole stems available anywhere?
Even if I have to buy a full set of stabs
sw knight v2 stabilizers have long pole variants and are compatible with wooting
there are other long poles like TX AP, but it's too wide for wooting plates, so they don't work without cutting your plate
The correct one?
yeah these
they seem to be in high regard too, cause you only need some krytox 205g0 to lube them
It doesn't say screw-in or clip, are they all screw in?
Yes
And these stabs with the Geon Raws will make everything all good?
all keys the same height
Well that has nothing to do with stabs if you mean key height
well what's the issues of needing longer poles?
In rare cases loose keycaps might wobble on jades or raw he switches
This doesn’t happen in probably 99/100 cases though and it’s to do with the stabilizers and keycap tightness
if you press firmly on the ends of stab keys, they might tilt around
but it doesnt happen in normal use
I have GMK keycaps, sooooo, not an issue?
in my experience with gmk keycaps
Yeah I haven’t heard or seen a single report of this from a gmk keycap user
But these stabs would mitigate any issues for sure?
and are a decent upgrade anyway?
Sure. But the reason people are saying not to buy unless you have issues is it’s like buying anti tank protection living in the suburbs of America
I did already by TX stabs
yeah
Then just use the tx stabs
Alright thanks $40 saved then
All of this was originally caused by like one viral reddit post from a guy with aliexpress keycaps
lol
almost no one with half decent keycaps will ever run into this issue
Only a $5 temu set got it
It’s the same as that guy who reviewed raptor he switches and said they have more raw data because he confused magnetism amount with he data
And suddenly tons of people believe raptor he switches are best for he data information
yeah cause obviously geon raws have more raw data
I have raptor switches in my 60HE but not because of that reason.
Just for the sound and feel
There’s also a far cheaper option if you do run into the longpole switch issue
These are literally $3 https://divinikey.com/products/geon-stem-spacer
Geon Stem Spacer is used on top of the switch stem or stabilizer stem to balance long-pole switches (3.0-3.5mm travel) when paired with standard stabilizers (4.0mm travel) to reduce interference. This is a great option when switching between different switches with different travels and not needing to disassemble the b
I had an issue with TX AP screw-ins and clip-ins not working with my 60he, is it fixed in 80he?
Yeah 80he won’t have any compatibility issues because it’s built only for screw ins
The 60he is purpose built hybrid for clip in and screw ins and this causes compatibility issues with certain stabs
oh so the stab cutout must be wider to fit more stabs
Yeah basically they cannot change the 60he stab hole to be more compatible because they currently use clip ins for the prebuilt
i see, that's nice
One day without my wooting and I’m already sad playing fps games. Need that 80he quicker
soon
I'm going with the white zinc and GMK Matsu
did you sell it? D:
Yeah 60he is sold
It’s okay, I’m just ahead of curve to buy 60he pro as new travel keyboard
I’m using jades and I dont think you need those
What
No wobble issues if properly installed
Yup it's time to go pro chat
i dont flipping know 
You missed livestream leaks
is there also a 60he max
Need some opinions. Does this wrap color look similar enough to the tofu?
any clips?
Lekker Keycap 🤔
60HE Pro 🤔🤔
What is a Calder stream without leaks? Nobody knows because that never happened! 😂
So probablly 8k polling 60 he?
It sure looks like it! 🥲
Free switchy 
so 60he pro is real... what would be pro about it?
That it is for professionals
guess i wont be going pro
that would be me

noob
😂
I guess if it's going to be 8k polling it won't be worth to upgrade
I wonder what else can be upgraded
Any one tried jade pro? Can be better then raw he?
gasket mount similar to 80he?
ermmm that'd be a whole new board
im down

WHAT IS MY INTERNET DOINGGG
Tru. 😭😤
that's what you get for calling me a noob!
mue ehehhehehe
top 3 cases for wooting 60 he (iyo)?
now that I think about it, 461e is the 60% 80he lol
Frog mini, salvation, Fjell
cause it's similar to 80he mounting system
exactly!
now i want a nipple case
fr
yeah it's cool, but I think I don't like the silicone insert that much
in general, as a material for in-between the pcb and plate
I think I like poron more for sound
i mean yeah you aint wrong
honestly i would just use it for mounting and have nothing in the middle
what would u say the best is under 150 is?
yeah but isnt it required?
no
the middle pad is optional
so the outer part of the silicone is used for the mounting
oh in 461e? yeah I think you can use the outer part only
yeah more possibilities is always cool
if it was poron on the outer gasket then that shi will fold
ig you can even put material of choice in there
true lol
but yeah otherwise you have 3 options for the alphas
so berry berry gudo
someone get that shi on AE >:(
my frog should be here in time for my bday, but I need some more plates
cause I feel like alu is going to be super bright
the 461e?
hell ye
I asked kbdfans to put pbtfans emma on ali not long ago
they did it but I decided not to get that set lmao
I was considering at the time but then I thought I still don't like the alphas on pbtfans
so decided not to get it
😂
he has it?
yeah he said he got it for his bday
aussie accent
Does anyone know what mods you can do I just got the keyboard and scared to mod it cost alot and I don't wanna break it lol
its pretty hard to break it with mods dont worry, just follow tutorials on youtube and youll be alright
should even be some videos on the wooting channel itself about modding
Thank you was just a little worried bc it's expensive and I've never modded before
just handle it with care and its pretty much impossible to ruin it
Ok, do THESE look similar lol
Nope
What about these do not look similar
I mean i dont know much about anything but my eyes tell me the color seems kind of alike
:D
That is the only thing that matters, so thank you for the input lol
They are, wrap has lighter colour and it is more glossy
the right is anodized alu, the left is a wrap
also images on the internet under random lighting or renders even are not good to colormatch 
unless you can whitebalance the images and have a reference monitor
Yeah I'm not doing all that, the wrap is good enough
not sure what you are trying to do but probably 
Just trying to get as close to dark grey tofu with a vinyl wrap as possible
what are you trying to wrap
I'm wrapping a keyboard case that I like more than the tofu
I hope you are good at wrapping then
Yeah I have experience with cars lol should translate well enough
Mans took a pic of his dads car asking about wrapping a keyboard
how do you guys feel about this
~~ its gmk clones but its geon clones so.................. ~~ (edited)
It’s literally official gmk
I don’t know why you think it’s clones
?????
bait obviously
its geon and a manufacturer
???????
geon and gmk, yes.

The manu is gmk. What are you talking about lol
people really just say anything, huh?
i told you all
AI is tested in wooting
we’re talking to gpt
😂😂😂
You get one of these too cause it's off the wrap sellers website
this time?????

bro geon designed gmk black snail and gmk creme and now evil dolch
all of which are made by gmk
they partnered with some company from CN called "Aifei" in the past
no they didnt
Stop making shit up
no?
respectfully
stop lying
aifei makes clones of gmk colorways as well as other manufacturers
like pbtfans
If they happened to clone a geon designed set
that doesnt make them collaborated with him
LOL

oh so it was the reverse ok
?
He’s confused. Geon did make stuff with aifei in the past but it wasn’t gmk clones lol
no geon branded “gmk” is made by aifei
thats just plainly off
What he did 2 years ago doesnt matter now lol

Also
iirc
It never even happened
Lmao
lemme check about it
I like that geon went out of his way to acquire a license for gmk evil dolce, purposely set the price low and ate a lot of cost to encourage new keyboard enthusiasts and folks just spread misinformation about it
damn geon is such a goat for cancelling the partnership and then making an affordable set with GMK themselves
anything that was going on with aifei no longer have any bearing with geon
I might just get evil dolch even though I don't like the colorway lol
this
kinda fucking sucks a guy can go
“Geon gmk clones hurr durr!!!!”
i see
thx!
geon has to be one the most honest people in the hobby
one of the few people that stands up for their mistakes and also has the funds to eat up a million dollar manufacturing error
and he repeatedly tried to push prices down for high quality boards
100% hes father is higherup in samsung
Food, agd, phone, nukes, tank, ships, nuclear reactors
In one of these
bro what?
Yes samsung does that
he literally own factories for shit and just happens to be really into keyboards
not no nepotism money

rather, glare approached him to make boards and got geon hooked 

heehee
I prefer the rumour that geon is t1 fakers secret brother and that’s why he supports t1 as well
He made him addicted

no raws

No frog mini
no F1 
great view
Yeah it’s awesome down there
The more that I listen to Geon Raw HE sound test the more that I want it. There's just something with its tone that I like.
best wooting 60 he case under 150?
Tofu redux might be under this price
Shipping/import fees might set it over though
Here’s more lol.
bro Korean but especially Japanese companies are so varied in what they produce it's hilarious
Mitsubishi is like that too
One of their biggest areas is shipping. Like giant container boats.
Uwooooooooooo
It sounds soo good on bigger keys
@untold wigeon this is a personal fave
And with gmk
Yeah they’re all over the place too
there's so many of these memes lmao
okay I'm done
I finally got the proper bumpons for the bottom of my case and tried them on my wooting/tofu build, so much cleaner and less thuddy now.
also Geon's tip to grease the oring on the outside with 205g0 might be the smartest thing I've seen in this hobby all year
I found before in my tofu the spacebar sounded like it was right on the desk lmao
is this refering to burger mount?
Oring friction mount
in his last YT stream he showed him building the new oring mount frog mini leggera with the venom HE pcb and he put a coat of 205 around the o ring around the assembly before installing it, mine always got caught in the tofu on the top right near the backspace and bottom right cause of the stabs and Im using a poron plate foam, but with grease it went right in fine
It def makes it a bit slippery but I didn't get any on the outside of the case or you can clean it after etc
def makes taking it out often and messing with it a bit tougher lol
but isa it the best at this price point?
YOO THATS MEEE
yeah it can be a bit tough to get it sounding perfect but it's great for the price
Texans smh
someone should make a tier list for all wooting cases
or some resource for custom plates
Purely subjective tho
Tier list wouldn’t make sense
yeah true
I'd like to see some of the bigger twitch keyboard streamers get more into wooting, like do a stream testing it stock for their audience then putting in something more accessible like a tofu redux or an alumaze then maybe exploring more
If like one of them did a wooting build in a frog or a salvation for example after showing the stock case it would be so dope
well if u like a case that sounds like shit and full of reverb then a tierrlist would be shit
but if ur any other kind of normal then it would be ok
Does it win again 100 yuans tho

Mmmm, these black knight switches are so good.
Although the return sound when the stem hits the top housing is left to be desired.
Thinking of ways to make that less harsh
“Sounds like shit” is purely subjective
Same for look and feel
It’s all purely subjective
Appealing to “normal” doesn’t make sense
It’s a range anyway
is there a list of compatible cases?
actually
before u keep asking questions like this
Refer to the faq
🙏
I wonder, what if we put different keys near an Audio spectrum analyzer to actually objectively see what sound frequencies and amplitudes it emits during the bottom out and return stroke.
forgot it existed mb
Not that I’m aware of
Prolly will be in the future
there is
Would be cool ig but still doesn’t make a objective “best sound” or any of that
Watch some sound tests for em and see what’s most preferred for u then ig
Yeah, but would be a good way to properly gauge switch acoustics
Rather than "it sounds creamy"
Yeah would make it easier to judge the sound before u get it rather than just hearing it through videos and whatnot too
Prolly not gunna be mfs taking switches or anything else that seriously for quite a while tho lol
Yeah lol
iHasWooting
https://www.theremingoat.com/blog/swk-ripple-switch-review this site has had the best switch reviews as far as detail and history go that I've seen yet, haven't read them too in depth yet but I don't see anything like sound frequency analysis yet lol
"Are you sure that's not a typo and supposed to read 'JWK Ripple', Goat?"
To add a whole bunch of unneeded complexity to my documentation process, no, I meant SWK. This review not only takes a look into SWK's latest switches in the Ripples, but what little we do know about this otherwise
having a frequency spectrogram of the switches wuld make them easier to compare against other switches.
supply chains are kinda like that yeah
for sure just kinda wild to see
where it's gotten to
That's switch family tree?
more like a supply chain web diagram
all good
No wooting on pic
although what is interesting is that gateron started their old tool and die manufacturing so they dont rely on other tool and die manufacturers anymore.
that's kinda cool
wooting uses graingold switches now
I like the sillyworks Type switches they did with gateron, I haven't tried them but they sound like a cool project
the best keeb sound test setup is on a c920 webcam with max volume input and lowest quality
and the webcam is hanging on my actual mic
I see

😵💫
there is
What
yeah
I can't find that manufacturer
Graingold is a switch manufacturer and now they make the lekkker v2’s
dude
i love the sound of the lekker v2s on my 60HE+ alumaze
i do wanna ask, can I use tap water to wipe down the surface of the alumaze or should I use distilled water or 75% alc wipes
also steel plate
for now im just gonna dry wipe to be safe
theyre actually in a patent war with gateron over the magnetic switch tech.
I Google name and I get no answers
Gugu black knigts sound very simiar to V2 from what I can hear from wooting's video






