🔧│keyboard_modding

[glossy pagoda]

Consumer would win that dispute 100% of the time

[prime orbit]

Soooo

Should I save the $2

I’m always down for saving money

[glossy pagoda]

Yea, what's life without a little risk?

[prime orbit]

True 😂

Now I can use that $2 towards the laser cutter mod 😭

if it’ll work

in my head it does

[tawdry tree]

Yeah it is! From my understanding, sellers just use that as an excuse to relieve them of their customer support duties. Route or something is another “service” similar to it and that auto added with everything I ordered from the usa. (https://www.reddit.com/r/changemyview/comments/10x6dc8/cmv_route_package_protection_is_highway_robbery/)

[prime orbit]

Bet I get to save $2

[tawdry tree]

It seems popular there but maybe I don’t understand its purpose fully?

[prime orbit]

Eh

I’ll save my money

If anything happens

I don’t mind being on the phone all day

I ain’t got anything better to do

[tawdry tree]

😂😂

[glossy pagoda]

That's the spirit

Prepare the Karen cannons!

[prime orbit]

Lmaooo

Do you guys know if my “mod” would work?

Laser cut the inside of the freebird60 to fit the brass bar from the tofu60 redux?

[tawdry tree]

It’d have to be machined and you’d have to check if the bottom is thick enough.

[prime orbit]

Ye I would pay someone to do it

[tawdry tree]

In theory could work but I think it’d be too expensive

[prime orbit]

It looks thick enough

[tawdry tree]

to make it worth while^

[prime orbit]

Oh yeah it probably would cost a lot lmaoooo

I’m just thinking of ways to mod it to fit some brass

Since I heard having it makes it sound way better

[tawdry tree]

If there’s enough room between the inside bottom of the case and how high the PCB sits, you could just tape it down 😂😂

or some thinner weights

[prime orbit]

Jank ass

😂😂

[tawdry tree]

would be much cheaper

😂

[prime orbit]

Fair

@calm pulsar ik you gonna be biased but which is better quality the redux or the freebird?

You too @tawdry tree

Which would you say

Save the money and get the freebird?

[tawdry tree]

just reduc

[calm pulsar]

tofu's finish is a bit better I think

[tawdry tree]

redux

[tidal frigate]

@prime orbit do you have family nembers with machines like that?

Like luthe

[tawdry tree]

thicker overall walls too

and heavier

[prime orbit]

Nah just figured there would be a company around me or sum that could do it

[prime orbit]

Ah ok gotcha

[prime orbit]

Makes the sound deeper im guessing?

[tawdry tree]

there def is, you could search one up and ask for a quote

[tidal frigate]

Well hand luthe should be enough

[tawdry tree]

yes, and less pingy I suppose.

[prime orbit]

Not sure what that is lmao

[prime orbit]

Pingy?

[calm pulsar]

to me I was willing to go for fb60 cause I liked the looks better

[tawdry tree]

Ringy/Pingy, the sound of a bell?

[tidal frigate]

It is cnc but you have to do everything by hand

[prime orbit]

Ah ok

[prime orbit]

I don’t trust myself enough for that 😂😂

[tidal frigate]

Thats why I ask if you know someone

Also it has to be in exactly same thickness

Yes

[prime orbit]

Yeah the redux is looking better

I’ll just do that

$20 more

That’s fine

[calm pulsar]

the weight costs too

[tawdry tree]

less than having someone mill the damn thing would be

🤣

redux with weight is like $80?

[calm pulsar]

wasnt following the discussion but yeah I'd avoid paying forthat lol

[prime orbit]

$20 more than freebird in total

And yes I added the switch puller to get free shipping

I save $3

[magic forge]

I s the just white alumaze case shiny? or the ocean blue abit more ?

[sweet oak]

Pinks also shiny

[magic forge]

cause im trying to match this keycap above. I kinda like the ocean blue (shinier case), but i think it will be too mcuh blue. Any thoughts? and just go with white.

[gleaming crow]

What stabs would work with the wooting 60he (not he+) polycarbonate plate, tx ap long pole tkl plate mount or clip-in, I’m very confused on which ones to go for

[paper bloom]

Get the normal ones first

[gleaming crow]

Which ones are the normal ones

[paper bloom]

without long pole and id recommend not to get TX ap

get SWw

Swag keys

[gleaming crow]

I ordered magnetic jades though so idk what is really compatible with those

I’ve heard that the stock stabs don’t work with the jades because of the travel distance

[paper bloom]

Any stabilizer

only issue is the tolerance

[gleaming crow]

So the tx aps won’t work with the pc plate

[paper bloom]

MAYBE or not idk

Some ppl are saying there are issues with irt

[untold wigeon]

NPKC GH60 A60 Heavy Anodized... https://www.amazon.com/dp/B06XSW3N27?ref=ppx_pop_mob_ap_share

[sweet oak]

Wish they had a coffee color

[tawdry tree]

SW Knights are PCB mount only.

Which keycaps do you plan to use @gleaming crow?

[paper bloom]

O theres no plate mount?

[tawdry tree]

Not currently

[paper bloom]

O ok

[gleaming crow]

just the ones that come with the wooting 60he

[boreal fjord]

Yo i got a question

[gleaming crow]

the shine through ones

[tawdry tree]

Then there’s no need for long pole stabilizers, those are only really necessary with loose keycaps.

[boreal fjord]

My aftermarket plate doesn't support snap in stabilizer can i still make snap in stabs fit somehow?

[gleaming crow]

so ill be fine with the stock stabs, jades and the polycarbonate plate?

[tawdry tree]

You can balance your stock stabilizer wires to improve sound if you hear rattle.

[tawdry tree]

Yessir

[gleaming crow]

sweet

[tawdry tree]

You mean PCB mounted stabs?

[paper bloom]

The durock

V3'

s work

[boreal fjord]

Would there be anyway possible for my pom plate to still hold snap in stabs

[tawdry tree]

You can’t make that work but you have the 60HE+, you can buy TX APs, Staebies or others.

[boreal fjord]

Attempting to gummy mount so i cant use screw ins

but i just noticed my pom plate isnt made for snap in stabs

[tawdry tree]

You can use a softer O-Ring or just TX AP PCB mounted clip in stabs

[boreal fjord]

I see

Damn more waiting

[tawdry tree]

Those work with an O-Ring.

[boreal fjord]

I might just temporarily use my brass plate or the stock plate

Until i order something resolve my issue

To*

Very unfortunate

[tawdry tree]

You didn’t have the Module right? Just the 60HE+?

[boreal fjord]

I have the module

It came with the stock plate

[tawdry tree]

Then use the stock stabs

of the Module.

[boreal fjord]

On my pom plate?

[tawdry tree]

for now

Yeah

[boreal fjord]

Let me check if they happen to fit

Brb

[tawdry tree]

or your brass plate but if you want to try out the POM plate you can do that.

[boreal fjord]

Bro

@tawdry tree

Stock stabs worked

U deserve a handy

Tysm man

I have a new question now

Will changing the stock stab wires change the initial sound?

[cyan zodiac]

No

Aren't you trying to minimise wire sound as that is where the rattle comes from

[tawdry tree]

Not change the wires, but balancing can help if you hear a rattle or ticking sound.

Wires are often slightly bent from factory and balancing means to bend them back.

So they’re (almost) perfectly straight.

[paper bloom]

@boreal fjord make sure ur lube for ur stabs and to the wire are prim and proper

[gleaming crow]

which mods are actually worth doing, i have a new case and jades on the way, is there anything else i should look to mod to make it sound a little better?

[paper bloom]

Tape mod, stabilizer relube or switch out

Burger mount

Or gummy o ring mount aka friction mount

[marsh saffron]

Friction mount

[paper bloom]

Relube ur jades

Spring swap

[marsh saffron]

Has anyone tried putting L80 springs in jades?

[untold wigeon]

Do I understand correctly that the stepped caps lock keys don’t work on the Wooting? I thought I read that somewhere.

[marsh saffron]

Pretty sure I remember reading the same thing

[tawdry tree]

Why would it not? Was there a reason with it?

[untold wigeon]

If I remember correctly it had something to do with the posts not lining up properly. It doesn’t make sense to me but I swear I read it somewhere

[tawdry tree]

Posts?

As in for stabilizers? That a 1.75U key doesn’t have?

[untold wigeon]

Ugh. I’d have to start digging. I was hoping someone with experience could tell me.

[tawdry tree]

Only thing I can think of that it’d interfere with the switch itself, as in you can’t press it down all the way.

[untold wigeon]

Yes where the key connects to the stabilizer

[tawdry tree]

But I don’t think that’s the case with Gateron’s switches and GMK’s keycaps.

[tawdry tree]

Caps Lock doesn’t have stabilizers.

It’s a 1.75U key.

😅

[untold wigeon]

Good point. lol

[little glen]

Does not work

[untold wigeon]

So maybe it’s as you say and you don’t get a full press

[little glen]

Stepped cap has the stem on the left

[tawdry tree]

Ohhh

[little glen]

Wooting stem is placed to be in the middle

[tawdry tree]

Yeah you’re right

forgot about that

[little glen]

At least that‘s how it is on my one but i assume it‘s the same on all the other models

[untold wigeon]

I knew I heard it somewhere. Ty @little glen

[tawdry tree]

There are that are centered

[untold wigeon]

I’m grabbing a GMK set and was hoping it was possible to use. I read about a workaround where they were gluing it in place with a home-brew epoxy. Super jank though

[tawdry tree]

I don’t think GMK’s is though

[untold wigeon]

I guess I’ll find out.

[little glen]

Gmk is on the side not centered

Source: my gmk

[untold wigeon]

You truly are a wizard!

lol

[little glen]

I really wanted it to work for me as well but yk just not compatible

[tidal frigate]

It is true.

[untold wigeon]

@tawdry tree this is what I saw.

https://youtu.be/yItsd4QzEoA?si=HrzN-MoTuH1bikny

Like I said. Jank.

[tawdry tree]

That’s so tedious omg

[untold wigeon]

Agreed

It would be on a key I can’t use anyway. It might be worth a try.

[boreal fjord]

When gummy mounting do i still have to use the screw to align my connection port?

Or is that ideal?

[quiet bay]

no it's all friction mounted

[cold bloom]

I really wanted to get a stepped caps to work too, I remember researching it a bunch and there's a file on geekhack you can 3D print and try if you have some keycaps you'd be okay with cutting up a bit lol

otherwise it's not possible

https://geekhack.org/index.php?topic=88378.0

[untold wigeon]

I spend enough money on mice and keyboards. I’m not getting into 3D Printing. lol

[tawdry tree]

Imagine if you could order a Woot PCB in any layout

like PCBWay but for keyboards only

[clever flower]

lol, imagine actually ordering a 60he+ module. i want to but it doesnt let me for some reason.. tried on 3 different browsers, 2 different payment options and all the shipping methods xD

[harsh dove]

Afternoon yall

[normal schooner]

heyhey mister cam

[harsh dove]

https://tenor.com/view/forest-gump-wave-hi-hello-howdy-gif-22164679

[cold bloom]

Had a little piece of plastic come off my space bar somehow lol

You ever have this happen cam?

Just flipped it back to right side up but sucks lol

[harsh dove]

Wait you’re saying that actually chipped off?

[cold bloom]

yeah

I can feel a small bump

and I can't wipe it off

I have no idea how, it was on my keyboard all night

[harsh dove]

You sure it’s not a mold mark?

[cold bloom]

It wasn't there before

let me double check my photos

[harsh dove]

Hmm

[cold bloom]

oh nvm

it was

I just now noticed it with my overhead lights lmao

I just flipped it back around tho either way, unfortunate spot for a mold mark I guess

but I remember my pudding keycaps I had wait back had like 5 of them in a row on that side of the spacebar lmao

[harsh dove]

You use flipped spacebar?

[cold bloom]

yeah I normally do

[harsh dove]

Ah okay

Then yeah you’d see it

[cold bloom]

I find it easier in games I jump with space

I prefer scroll wheel jump but some games like ow2 I leave it double bound or some games I need to use it

[harsh dove]

On a side note, I pulled the trigger on that GMK Stealth set

Offered the seller $15 less

[cold bloom]

that's dope

I'm gonna try and keep my eye on gmk cosmos

and maybe get dualshot sometime soon

[harsh dove]

Yeah those are both great sets

Can’t wait for cosmos

[cold bloom]

cosmos is exactly how I'd design a set I think

wouldn't do as good of a job but I love that theme

[untold wigeon]

You got that Stealth set? Nice!

[harsh dove]

Yeah

Talked him down to $150

[cold bloom]

yeah I checked my 7u spacebar and it has the same mark, I usually don't use my overhead lights so today I was like WTF IS THAT

lol

[untold wigeon]

That’s a good deal! Happy I could help

[harsh dove]

lol thanks

[fluid ravine]

Afternoon

[cold bloom]

Imma need that optimum case to drop

I think this gmk ascii set would look cool in that too

pretty minimal

[harsh dove]

Mainly wanted it cause I already have a BoG set but it’s PBT and I want an ABS BoG set

[harsh dove]

Afternoon

[untold wigeon]

@harsh dove look here. I doubt he would break them up plus he’s asking a lot.

https://www.ebay.com/itm/176062117065?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=yLkgN2exThC&sssrc=4429486&ssuid=8hmdpzngt6k&var=&widget_ver=artemis&media=COPY

[harsh dove]

Yeah I doubt it and yeah he is

[untold wigeon]

@harsh dove this guy may be more nutty.

https://www.ebay.com/itm/196275645879?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=IKysbKHnRSu&sssrc=4429486&ssuid=8hmdpzngt6k&var=&widget_ver=artemis&media=COPY

[harsh dove]

They’re opened…..

Whether they’re unused or not he reduced the value of them

Charging that much for open box is crazy

[cedar gate]

This dude thought he knew what he was talking about cuz he watched 2 yt vids🤣

[harsh dove]

Yeah don’t lose sleep over it lol, idk why people insist on thinking they’re different

It’s literally been confirmed by manufacturer

Aka Gateron

[tawdry tree]

There was another guy a while back that was also very insisting on them being different.

[cedar gate]

Yeah I bought a ten pack of both and the only real difference was the lube

The lube was noticeably better on the jades ime

[harsh dove]

Yeah and lubing can make a switch sound different but that doesn’t mean it is physical difference in material or design

[cold bloom]

people like that are what ruin hobbies for people lol it takes no effort to be like you know what I might have had a diff experience with the ones I got, but just use whichever you prefer @cedar gate

dude doesn't have to defend one switch to the end of him

everything you said was pretty objective

[surreal heron]

my gateron jades just made it from china to the US

so excited to get them

[marsh saffron]

My dashes are in Vancouver so they should get here Tuesday

It's only a 4h drive, but it also needs to go to a city an hour away because my town is too small lol

There is a single mail truck that makes the 1h drive each day

[steel hemlock]

Can you friction mount in the original wooting plastic case?

[polar girder]

Yes

[tawdry tree]

buyers remorse, they paid more so they must be different

[cold bloom]

cognitive dissonance is really strong man lol

buying something more expensive inheritently makes people think it must be better, sometimes the same goes just cause they bought something different

[harsh dove]

Yeah and being someone who usually likes more expensive, you learn more does not always equal better

[marsh saffron]

yeah its basically, more can mean more better

[untold wigeon]

-Turtle Beach has entered the chat.

[fluid ravine]

Da flip

Did I just come back to

[fluid ravine]

Friggin 4090 owners

[harsh dove]

https://tenor.com/view/hey-woah-wait-hold-on-back-off-gif-14483661

4090 has earned their place alright

[fluid ravine]

Lul

[polar girder]

The best

No competition

I just helped my buddy build a new 4090 PC last night

He got a 4090 build for the same price as a 4080 super prebuilt lol

Cuz we bought the parts

[untold wigeon]

Do you mean to say $1,700 to $4,000 for a 17% improvement over a 4080 which is only $1000 isn’t a good deal?

[polar girder]

Liquid cooled suprim x 4090 pretty sexy

[polar girder]

What?

[untold wigeon]

What what?

[polar girder]

1700 to 4000 for what

[untold wigeon]

a 4090

[marsh saffron]

they are like 2500-3k CAD on newegg

[harsh dove]

The two 4090s I got for MSRP

USD

[fluid ravine]

2?!

[untold wigeon]

That is NOT typical

[fluid ravine]

;----------;

[harsh dove]

Yeah I got em at launch

[untold wigeon]

Well there you go. Smart

[fluid ravine]

da flip

[harsh dove]

I know they got marked up during the whole China tariffs and ban thing

[harsh dove]

Yeah I got a gigabyte gaming OC model and an ASUS STRIX OC model

Ended up selling the gigabyte model later on

[harsh dove]

Prices seem to come have back down since this too

[polar girder]

Yeah idk

I mean it’s an expensive GPU but they’re mostly between MSRP and around $2k at this point

[harsh dove]

Yeah

MSRP of AIB Models is between $1600 - 2000 anyway

[cedar gate]

Yeah thx

4090 is a waste unless you have money to spend are in esports or mining bitcoin or doing graphics design or... maybe it isn't a waste

[harsh dove]

I wouldn't say its a waste but most people don't need one, I don't even need one tbh

[cold bloom]

4080 gang

[calm pulsar]

here

[uneven cradle]

Thinking of getting a 5080 myself

[untold wigeon]

4080 for $1000 or a 4090 that is 17-20% faster at $1,700-$2,300

That extra $700-$1,300 could be a sweet CPU and a PSU and you would still be in the same ballpark.

[untold wigeon]

I’m dying to know what the msrp is going to be on those.

[calm pulsar]

$5080

[untold wigeon]

[cold bloom]

I've always leaned more towards the 80 series card myself

but I wonder what we're gonna see in the new gpus

I feel like it's gonna be a lot of AI powered stuff

maybe improved frame gen etc

[elfin garnet]

50-series and AMD 9000X3D series

[uneven cradle]

https://tenor.com/view/book-of-boba-fett-the-mandalorian-this-is-the-way-the-book-of-boba-fett-mandalorian-gif-24825263

[cold bloom]

I think I'm gonna go amd mobo/cpu next before I get a new gpu

[calm pulsar]

once the new x3ds come out I will likely just drop-in upgrade from my 7800x3d

[untold wigeon]

This is why I want to jump to AM5. I love my 12700kf but I love the freedom to upgrade across generations with AM5

[calm pulsar]

yeah the lifetime of the amd sockets is great

[untold wigeon]

Seriously. AMD is really great with value for money

[harsh dove]

Last I checked it's about 30-40% faster unless CPU constrained

It's basically 70-75% of the performance of a 4090 at 75% of the price

[untold wigeon]

25% faster at 4k

17-20% faster at 1440

[harsh dove]

I'm referring to overall avg and msrp prices

[untold wigeon]

Ah.

[harsh dove]

You can refer to Gamers Nexus and Hardware Unboxed 4080 Reviews, they test all resolutions

[untold wigeon]

Yeah I know them. I like TechPowerUp too

https://tenor.com/view/ltt-lmg-linus-linus-tech-tips-sexy-gif-23988155

The only one I don’t trust is ⬆️⬆️⬆️

[sweet oak]

“And the one you should trust, our sponsor!”

[untold wigeon]

https://tenor.com/view/hysterical-laughter-laughing-gif-25735842

[harsh dove]

Yeah it's only about 12-17% faster at 1080 and 1440p and at 4k it was about 30%

so biggest gain would be from gaming at 4k

[untold wigeon]

I paid enough for my 1440 monitor. I’m not switching until prices come way down

[harsh dove]

Yeah you're way better off with a 4080, not missing out on much

[rich cape]

This works wonders for that issue

[sweet oak]

4080 is gud

[polar girder]

4080 1080p gang

Nvm I’m the only one

[untold wigeon]

@polar girder but you’re the only one in the 500fps gang. lol.

[cold bloom]

I was there for a long time LMAO

I'm on the MSI 1440p 360hz oled right now

but I think my 4080 will be good for a while still

[untold wigeon]

I have the 45” LG 1440p 240hz oled. I love that thing. You’ve never seen blacks so black

[sweet oak]

27” gang

[fluid ravine]

here!

am on 1080p 27' 165hz 🥲

[sweet oak]

Youll get that oled soon enough

And experience greatness

[calm pulsar]

1440p 27" 165hz

[fluid ravine]

trust!!!

how much are oleds ;-;

[sweet oak]

I think the new gens are much more affordable

[fluid ravine]

like...

👀

[sweet oak]

Hold on ill check real quick

MSI’s qd right now is 680 USD

ASUS has their glossy woled at 700 USD on newegg right now also

Definitely much better than how the oleds originally started

[fluid ravine]

what's money?

[final widget]

yo @harsh dove

[sweet oak]

gone, poofed out of the wallet

[fluid ravine]

What wallet?

[sweet oak]

[cold bloom]

the vividness of the colours on qd oled is INSANE

I still can't believe it when I watch hdr content especially

I have a really dimly lit room too so I can get really nice blacks out of it and use the 1000nit HDR mode also

I think the LG is w-oled

so the blacks might be more consistent in diff lightings

but they're both super nice

[sweet oak]

yeah both are top tier

[uneven cradle]

Time to upgrade soon

[untold wigeon]

Only part that sux is my monitor is $700 less than it was when I got it when it first came out. Though it is out of stock through LG.

[uneven cradle]

Early adopter tax be like that

[untold wigeon]

If I were to buy it again I’d get a total tech membership from Best Buy. Because members get it for $999. Non members $1,699

[untold wigeon]

Yeah it’s rough.

[final widget]

is Mr Cam here

[untold wigeon]

He was earlier

@harsh dove

[jade storm]

Where is the chart showing all the different switches?

[median spade]

#🪛│modding_faq

[jade storm]

Can we get a pin?

And thank you

[harsh dove]

No

Wassup

[untold wigeon]

How do you typically get the orings to stay put when doing a burger mount?

[harsh dove]

I thread them onto the screws

[untold wigeon]

Oh like before you even offer it up to the case you have all the screws in the orings?

[uneven cradle]

Lose your mind trying to do it any other way

[final widget]

lol, i was wondering about the cables- i got a question .. with the lemos especially, how are they screwed into each other, i just thought about it and couldnt they easily be unplugged when gaming and makes ur keeb dc ..

[harsh dove]

They have little latches

It won't disconnect trust me

[uneven cradle]

Yeah they're designed to be super secure

[final widget]

cause i saw they dont have screw ons or anything, and they seem pretty easy to pull apart 😒 so im kinda confused

[harsh dove]

There's a push mechanism that releases the latches

you can't pull it apart otherwise

[untold wigeon]

These? Gat Damn!

https://loobedswitches.com/products/genuine-lindy-lemo-usb-cable?gad_source=1&gbraid=0AAAAAqIrbjqbCK7Rm6HLKUOlMNMKY-TiI&gclid=CjwKCAjw7s20BhBFEiwABVIMrZqtnKsdwLjX0p95gg79XdE2o-ki4eW8DEbDXecMUywVFTzBqIf_1RoC4n0QAvD_BwE

[uneven cradle]

The connector is designed for shit way more important then connecting a keyboard

[harsh dove]

Yeah but just referring to the connector itself

[untold wigeon]

Oh ok. That’s an expensive cable. Is this like an alternative to the aircraft cables?

[harsh dove]

Yeah the Aviator connector

[untold wigeon]

Gotcha. Looks sweet.

[harsh dove]

Yeah they're nice

[uneven cradle]

Can get this one if you have something to compensate

[harsh dove]

haha I remember that one

[untold wigeon]

Dude I’ve never seen one that size

[brazen sparrow]

What is the purpose for aviator connections?

[untold wigeon]

https://tenor.com/view/look-size-that-thing-gif-10812270

[uneven cradle]

https://spaceholdings.net/products/chad-cable

Appropriately named

[untold wigeon]

https://tenor.com/view/mujikcboro-seriymujik-gif-24361533

[final widget]

ahh i see! could you also tell me why wiredin is the best place to buy them cause compared to other places they are more on the pricier side when thinking they all are giving the same product no?

[brazen sparrow]

It’s huggggeee

[harsh dove]

It's really up to you , I just like the options from WiredIn and the personalization, quality, etc, plus he's a cool dude

It's all handmade stuff for the most part

[final widget]

any other places youd recommend? any personal personalization we can do at wired in

[harsh dove]

Yeah if you join his discord and hit em up, he'll be happy to help you with customizing a cable. I haven't really bought custom cables from other places besides him tbh lol, I have some custom cablemod cables that are pretty nice, the powder coat paint on them comes off pretty easily tho imo, and there's also Space Cables which i've heard is pretty decent

[brazen sparrow]

@harsh dove the aviator connections are they purely aesthetic?

[harsh dove]

I mean they have a purpose but yeah basically aesthetic

[brazen sparrow]

What is the purpose?

[harsh dove]

In the keyboard world, just keyboards really lol but those same connectors are also used for military equiment

[final widget]

lets see the cables you got from him 😄

[uneven cradle]

You're buying for the aesthetic mainly

[harsh dove]

Right now I just have these 3, and then I have a custom copper cable being made by him that’s gonna have copper connectors and he’s gonna do a patina on them for me

[uneven cradle]

I need to get a silver one for the raw case

[harsh dove]

Yeah I thought about getting his xray cable

[final widget]

im thinking to get a black one with some mods for the raw case to match with cosmos ..

[harsh dove]

I bet you could get him to do some Cerakote on the connector to match the GMK cosmos

Little colorful specks or something idk

[final widget]

yea im thinking about a combo but ill speak to him ina bit to figure it out aswell

[untold wigeon]

Killer deal on AE for Jades right now.

https://www.aliexpress.us/item/3256806424710853.html?ug_edm_item_id=3256806424710853&pdp_npi=4%40dis!USD!%2448.85!%2421.49!!!!!%402140f62117209950630518158d0a54!12000037821096656!edm!!!&edm_click_module=alg_product_3_8345504470&creative_img_ind=4&edm_log_data=edm-item-list-three-columns.store-product-log-link&tracelog=rowan&rowan_id1=aeug_edm_23869_1_en_US_2024-07-14&rowan_msg_id=mikdCOWS_23869_%2412744e9d27eb4aefb725f7b3b55dd5dc&ck=in_edm_other&gatewayAdapt=glo2usa

70 for $40.06

[harsh dove]

$40 for 70 nice

Ima need to talk to Calder about some All Black Closed bottom yellow stem switches lol

[untold wigeon]

https://tenor.com/view/wink-eye-wink-gif-12352742718877841322

I need all purple. Let him know.

[harsh dove]

Ima tryna L45 stem in my black Jade knights real quick

[untold wigeon]

I thought someone tried that and it was sloppy

[harsh dove]

Nah its not bad tbh

[untold wigeon]

I tried Lekker stems in a Dash. It didn’t feel any different.

[harsh dove]

about as much wobble as a Gateron jade tbh

[untold wigeon]

Interesting

[harsh dove]

this is with black knight top housing

not jade

[untold wigeon]

I’d definitely be down with a black and yellow aesthetic

Looks really nice

[harsh dove]

Part of me wants to convert my switches to this tbh lol

[untold wigeon]

Go for it. At least you’ll know

[harsh dove]

Well the wobble is less than the box stems and it's not too tight to where it causes friction

[untold wigeon]

I wanna see black with the purple stems from the dash’s

[harsh dove]

Yeah thatd be cool

[untold wigeon]

I’m telling you, get a file and trim those box stems to fit. It’ll be worth it

[brazen sparrow]

THAT is so fire

[harsh dove]

Neo lavender stem @untold wigeon

Has more wobble than the l45 stem tho

[untold wigeon]

Looks nice though

[gleaming crane]

Who here is knowledged in pc building, cuz I severely need help😭, it’s more so with trying to figure out why my pc won’t leave bios

[uneven cradle]

What's wrong you got windows on a USB or something

[quiet bay]

Did you install windows

[dark gyro]

1. Aesthetics: 😄
2. Practicality: Makes it easier to switch to older keyboards which might have different connectors i.e - mini usb, micro usb without plugging/unplugging the cable from PC.

[polar girder]

Yeah it’s probably a boot drive thing

Need windows

I just built a PC for a friend last night lol

Got windows and drivers on it working

[gleaming crane]

Okay so pretty much, I was upgrading my whole pc a while back, mother board and all, everything looks as it should be I’m just stuck at bios

Ohhh

That makes sense

Why didn’t I think of that😭😭😭

I need to buy windows right?

[polar girder]

No

https://support.microsoft.com/en-us/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d

That’s what you need

USB drive with free windows non-activated version on it basically

[brazen sparrow]

Definitely seems helpful when you are dealing with older connectors!

[polar girder]

Then it will boot up from the USB drive then install windows on your actual drive

[gleaming crane]

Alr going to try that now

[prime orbit]

What usb does the wooting need for performace

performance

[uneven cradle]

For the 60he it's like usb 1.2

[waxen bane]

no latency???

[uneven cradle]

a good quality usb 2.0 cable will work

[prime orbit]

oh fr? any issues if i plus it into a 3.2 or sum

plug

[brazen sparrow]

It shouldn’t

[prime orbit]

kk

[dark gyro]

mine works well with tachyon mode. The general advice from wooting is as lo
ong as they are under 2 meters in length.

[gleaming crow]

any difference between burger mounting and gasket mounting and are both viable on the 60he in a tofu redux case?

[uneven cradle]

Gasket will be softer, tofu redux doesn't support gasket mounting

[steel hemlock]

afaik you can't gasket mount the wooting

or atleast in the tofu

[gleaming crow]

what are my mounting options for the tofu

[uneven cradle]

https://www.keyboard.university/200-courses/keyboard-mounting-styles-4lpp7

[steel hemlock]

Screw mount with or without burger mod or friction mount (gummy oring mod)

those are the most popular

[gleaming crow]

what would i need for the friction mount

[steel hemlock]

Quite a few active users with the Tofu60, including myself, has it friction mounted

[gleaming crow]

is there a specific oring i would need for that

[cedar gate]

I wouldn't recommend screw mount

[steel hemlock]

Do you have the module or regular 60he+

[cedar gate]

Graveshift or bakenenko

[red abyss]

man i wanna get a tofu too and have no clue at all what you guys are talking about maybe i should wait a bit

[cedar gate]

If you have module then just graveshift

[gleaming crow]

the original wooting 60he but im gonna be using the PC plate and the silicone layer

[steel hemlock]

Depending on where you live, Bakeneko isn't necesarily the best option because of shipping

Mech land offers the same o ring with way cheaper shipping to canada, for example (compatible with screw in stabs)

[polar girder]

lol you can use the tofu just like you do the plastic stock case

And just screw it in

[steel hemlock]

Oh you corrected it

Yeah then we're on the same page :)

[cedar gate]

The silicone kinda pushes the annoying magnet sound and the foam kinda reduces it in my experience

[polar girder]

These guys just doing some mod alternate mounting stuff

Yeah I think I prefer foam over silicone

Just little quieter

[red abyss]

ok ty all that burger mounting, gasket mounting etc confused the fuck out of me

[gleaming crow]

so if i use the foam which gummy oring would i need for my config

[polar girder]

Not a huge fan of the foamy sound

[steel hemlock]

Honestly if you want a Tofu, just get it

[cedar gate]

You have og wooting 60he so either bakeneko or graveshift

[steel hemlock]

Everything were talking about will get a lot simpler once you have it in front of you

[cedar gate]

Whichever one is cheaper tbh

[polar girder]

lol yeah there’s a bunch of different mounting methods. But the stock plastic Wooting case and the tofu Redux share the tray mount style (which is just screw it in)

[polar girder]

This is just a personal preference

[steel hemlock]

You have plate mounted stabs then correct?

[polar girder]

Tray mount works plenty fine. It’s ok if you don’t like it but it works and is the most simple and popular mounting method.

[red abyss]

i do but i got into this custom keyboard stuff like 2-3 days ago so i dont want to mess something up or miss out on a better option because i didnt know it existed

[cedar gate]

Yeah maybe but metal on metals usually a bad idea for sound

[polar girder]

Not everyone cares about sound

Some people just want a cool case

[gleaming crow]

thats correct, im also gonna swap to jades if that makes a difference

[cedar gate]

Tofu is the best option imo

[red abyss]

thats me i dont care too much about sound

[cedar gate]

It's good for durability too

[steel hemlock]

As far as keyboard mounting goes, it's the cheapest thing you can invest or change for the Tofu. Everything else will be preference.

[cedar gate]

Do you want bounce?

[polar girder]

I mean whatever but no reason to scare people away from modding by acting like there’s anything wrong with tray mount

[red abyss]

im ngl no clue what bounce is completly new to this

[cedar gate]

Well I don't like it but if you don't mind then go ahead ig lol

[polar girder]

Majority of Wooting owners aren’t*keyboard nerds like this lol

[cedar gate]

Damn I need to find a vid

[cedar gate]

🤣

[steel hemlock]

For mine, I got the 45A Medium Oring to gummy mount it. (https://mech.land/products/graveshift-o-rings?variant=41067113513113)

The number just means how firm it is, so the smaller number means it'll have a softer sound etc.

I have stock Jades and stock steel plate with the Tofu, this is the difference in between both for mine.

[red abyss]

i just want a nice looking keyboard and not have to study keyboards tbh

[polar girder]

Yeah it’s not that serious. If you want a cool/heavy case then the tofu redux is a great value. And you can unscrew your current keyboard and just screw it in the tofu redux

Keyboard modding is a rabbit hole and it’s ok not not cannonball in

[cedar gate]

https://youtube.com/shorts/X03UiWCDO8s?feature=shared

[cedar gate]

Like that

Do you want that

[steel hemlock]

The Thackson did a GREAT video demonstrating what the gummy mount mod is here (I needed his help yesterday he's the goat) So you can have an idea how/what it's for.

This replace the needs for screws as it fits in to the case by being tight around the rubber ring.

[gleaming crow]

so would this work for my 60he config, stock stabs, pc plate, silicone/foam insert in the tofu 60 redux

[red abyss]

tbh only looks like youll ever notice it is when you press half your body weight on it

[steel hemlock]

Yes

[gleaming crow]

sweet tysm

[steel hemlock]

Youre canadian too right?

[gleaming crow]

yes i am

[steel hemlock]

They offer lettermail with postcanada

2$ shipping

No tracking but

Super sweet

instead of paying 20$ of import and shipping from other sites

Mech land is the goat

[polar girder]

Yeah

[gleaming crow]

all the other sites have insane shipping

[polar girder]

Nice

[steel hemlock]

Yeah this site is the GOAT for Canadians

Brushes, lube, orings, etc.

Lil small items like that over Canadapost 💋

Insane items for barely any shipping cost

[cedar gate]

No if you press with any considerable amount of force you'll get that

[red abyss]

is this one just screwing in too?

[steel hemlock]

Anyways I'm also fairly new to the keyboard modding scene but if you have any questions or need help with anything feel free to DM me if ever :)

[gleaming crow]

do you know of any good sites that sell gmk keycaps?

[cedar gate]

For that price I'd just get a tofu

[gleaming crow]

i think mech.land has them too acc nvm

[cedar gate]

Idrk when I bought them I used drop

[red abyss]

will be around the same price for me

[cedar gate]

Yeah

[red abyss]

maybe 15€ cheaper

[cedar gate]

I say since tofu is more well known its probably better

[cedar gate]

BTW there is another option alumaze but that's all about looks what you prefer

[jade storm]

THACKSON

[steel hemlock]

Not really sorry

Other than Drop themselves

[red abyss]

all i care about is the looks as it cant make my keybaord any worse

[steel hemlock]

They might, but they don't do lettermail for those so shipping is the same as other sites.

[cedar gate]

I like the tofu because of the simplistic look but alumaze is a bit more flashy

Sound is similar but you don't care lol

[red abyss]

i barely even hear my keyboard anyways while wearing a headset

[red abyss]

seen it before but i really disslike the gold part

man i want a holy 60 but i cant spend like 500€ on this keyboard

[uneven cradle]

It's alright holy60 sounds bad anyway

[red abyss]

idc about sound

[cedar gate]

Lol then you can't really afford bounce

[red abyss]

huh?

[cedar gate]

The only case that has good bounce is the salvation and its like 1.5x the price of holy60

300+

[paper bloom]

He could try the burger mount

a little bit of bounce not so much

[cedar gate]

He doesn't care about sound

[paper bloom]

Yea burger mount has bounce to it

[paper bloom]

refer

[cedar gate]

Oh that

Yeah mb

[paper bloom]

Is cool

[paper bloom]

You could get a PSD 60 with a burger mount

But know that it wont be bouncy

[cedar gate]

I did burger mount on my tofu I don't get bounce like at all

[red abyss]

now im confused i never said anything about bounce i didnt even know what that was until 2 mins ago

[paper bloom]

Check ur screw holes make sure that the bounce

Youre getting isnt too fucked

U probs overtightened it like me

[loud zephyr]

maybe wait a little while and see what Optimum's case is like, or Geon's Leggera which is cheap as chips. Which I think is what the British are eating right now to drown their sorrow

[paper bloom]

Im getting some of it

[paper bloom]

Its the same price as the alumaze

[cedar gate]

No that's a rookie mistake

[paper bloom]

And theyre running something to a burger mount

[cedar gate]

I didn't crank it down at all

[paper bloom]

I did mine on purpose LOL

Esp on the far right

but not my left

[loud zephyr]

for a rounded wedge, damn

[red abyss]

can you already see what color options they will have

[cedar gate]

Then again I don't mind cuz I personally hate bounce I did burger mount to avoid metal on metal

[paper bloom]

Ive done metal on metal and i didnt like my tofu 7 degree cuz it started to hurt my wrist

So i went to stock case

[uneven cradle]

Anything better then tray mount fr

[paper bloom]

Well thats accordingly to calder and the others

[loud zephyr]

Optimum's will probably be his staple colours: monotone. Not sure about Geon's

[paper bloom]

Via a live stream

[red abyss]

i want a purple case

[paper bloom]

His running a night color

with a more texture based with a brass bottom

Thats exposed

[cedar gate]

Frfr

[paper bloom]

HE could try a gasket PSD60 but he will need a modded plate

[loud zephyr]

nah, I have one... avoid purple https://cdn.discordapp.com/attachments/1186265045227802714/1218181836371660940/IMG_0702.JPG?ex=6695c5fe&is=6694747e&hm=679e22b7d8cdcd2cbd10a506bbd396a0888bfa43ee31d2a092fba487f33a6160&

[paper bloom]

Cuz the plates in there dont cook for the 60

[cedar gate]

Alright you only care about looks let me make it simple for you

[paper bloom]

If not wait for GEONWORKS tray and gasket mount VENOM60HE

[cedar gate]

Black setup or white

[red abyss]

not really the nicest purple tbh

[loud zephyr]

oh yeah, sorry about that

[red abyss]

but looks nice

i want something darker

like this as an example

[cedar gate]

Lets make it simple are you going for a black setup white or other

[paper bloom]

Whats that case

[cedar gate]

Oh wait purple?

[red abyss]

https://de.aliexpress.com/item/1005007187811416.html?spm=a2g0o.cart.0.0.64a04ae4ZRObWr&mp=1&gatewayAdapt=glo2deu

[red abyss]

yh

[cold bloom]

that case is a chonker

[loud zephyr]

redux? https://kbdfans.com/cdn/shop/files/80eada6c5f888a8c1d5df019f6576c3a_39f45a07-9d42-4f00-aac5-a6a77c9deb84.jpg?v=1705890086

[paper bloom]

O a alumaze clone

[red abyss]

yh

[uneven cradle]

Yeah redux has the most colour options

[red abyss]

ill prob either get a tofu 60 or the alumaze clone

[paper bloom]

IF you ask me

Id advise waiting

If you dont wanna wait and would prefer to use now

Id recommend either the tofu or the GH60 aluminum case

[red abyss]

im not the best at waiting

[paper bloom]

https://de.aliexpress.com/item/1005001483751496.html?spm=a2g0o.productlist.main.5.d059Xn6QXn6QhH&algo_pvid=d1dae533-0b40-4568-aa40-facb84048420&algo_exp_id=d1dae533-0b40-4568-aa40-facb84048420-2&pdp_npi=4%40dis!SGD!90.34!89.65!!!65.33!64.83!%402102f6ca17210132261854520e277c!12000034147707164!sea!SG!0!AB&curPageLogUid=RDOGwQQ6o5r4&utparam-url=scene%3Asearch|query_from%3A

[red abyss]

there are so many nice ones that sadly dont offer the purple i want

[cedar gate]

K I'd get tofu60 redux dark purple and some pbtfans keycaps

It's just simpler that way

They have a few good purple sets

And gmk will shine so unless you want that pbtfans is the way to go

[paper bloom]

https://de.aliexpress.com/item/1005007245874820.html?spm=a2g0o.productlist.main.1.3e2157e6DMvjTN&algo_pvid=faf805f1-af5e-4e3b-aeaf-82a7b4185588&algo_exp_id=faf805f1-af5e-4e3b-aeaf-82a7b4185588-0&pdp_npi=4%40dis!SGD!337.34!158.55!!!1774.56!834.04!%402102f6ca17210133155317756e277c!12000039934314173!sea!SG!0!AB&curPageLogUid=eMHbHe2LK7db&utparam-url=scene%3Asearch|query_from%3A

NVm its a alumaze clone not worth it

[red abyss]

looking for something darker like the holy 60 purple but not as dark as the tofu 60

[cedar gate]

As much as it pains me to say this if you only care about looks you don't need brass weight

[paper bloom]

Depends

[loud zephyr]

Wooting needs some of the pcb underglow for acrylic cases

[red abyss]

that thing is only like 20$ ill still get that

[paper bloom]

If he wants a dark toner color and its light dependent it isnt gonna be easy because it varies on color

[red abyss]

how much would it be to get it recolored? anyone here any idea?

[paper bloom]

CUSTOM ones

idk

depends on ur metal worker and as well as how much you really want done

@red abysshttps://kbdfans.com/products/461e-case?variant=42378568269963

Try this

[red abyss]

ive seen the nipple case already i dont like it

[paper bloom]

LOL

NIPPLE CASE

Ok that killed me a bit there and i c

[red abyss]

this as my keyboard color would be a dream

[paper bloom]

WELP idk what i can say

RIP

[polar girder]

https://mekanisk.com/products/fjell-keyboard-case-only?variant=43196095365294

[red abyss]

guess ill have to look around and see how much that would cost me

[red abyss]

that one has the perfect purple but fuck 275$?

[polar girder]

lol

[red abyss]

i cant sell that many of my cs skins lol

[polar girder]

Maybe the Klippe T in purple

But idk color

https://loobedswitches.com/pages/cerakote-commissions?gad_source=1&gbraid=0AAAAAqIrbjqbCK7Rm6HLKUOlMNMKY-TiI

Or that

What colors can you do? At the moment, color matching is 15$, just provide a pantone and we can get a close match. You could check out cerakote.com for any color that they offer.

[red abyss]

purple is the only sold out color and they dont show examples for sold out stuff lol

[polar girder]

60/65% - Single color - 160 USD

[polar girder]

I know lol

Sad

Could do a metallic pearl purple for $175 it looks like

But then also have to buy the case itself lol

[red abyss]

ok i think we pass on metallic purple for now lol

[polar girder]

[red abyss]

yh and need to buy a case i actually really like for that

[polar girder]

https://www.amazon.com/Anodizing-Aluminum-Mechanical-Keyboard-Compatible/dp/B07HCZGNVS

[red abyss]

ive seen that one before that honestly looks pretty cheap imo

[polar girder]

Yeah

Agreed

[red abyss]

man i wish this one had purple

[polar girder]

https://www.aliexpress.com/i/3256801297436744.html

A violet

Not quite purple tho

[red abyss]

and not as round

i really like round corners

[polar girder]

They used to make that case

In a regular configuration

But like $300

[red abyss]

that one is nice

ah

[polar girder]

And you have to make a custom plate for it

Yeah the nice stuff gets expensive ☠️

[red abyss]

yh ik

oh i found one of the best purples yet but that case is so fat

[untold wigeon]

Its not far from the purple you want. Under $100usd too.

Good amount of weight to it also

[gleaming crane]

Alr I just finished downloading it and I got it to pop up

What do I do now

[snow flint]

who selling the xray cable?

[gleaming crane]

Nvm figured it out

[static tendon]

Anyone know when OptimumTech will be releasing the keyboard case?

[fluid ravine]

Could be next month

[still hatch]

im ordering things in for my wooting 60he+ module. I bought a graveshift 50A gummy oring. This wouldn't fit with stock stabs and I would need to get clip in stabs right? I've just read that TX stabs r a bit tight and the keys might get stuck?

[fluid ravine]

Yes, since the TX AP and Staebies housing are too thick for the wooting plate, the compression of the housing would make the stem stuck.

General rule with Gummy O'rings is that the O'ring cant fit with Screw In Stabilizers so it is best recommended to use Clip in Stabs if you're going for PCB mounted stabilizers, otherwise plate mount works fine as well.

[still hatch]

what clip in or plate moutn stabs do u recommend personally?

[fluid ravine]

@harsh dove

[prime orbit]

sending in the professional i see lmaooo

[still hatch]

calling in the big guns haha

[harsh dove]

Cherry Clip Ins are good, just clip the feet

[fluid ravine]

Honestly I don't have any experience with the clip ins as i dont have the 60he+ but I do know that plate mount stabs with 6.5mm housing thickness works fine like TX AP stabilizers (although depending on your keycap thickness they will not get stuck), Durock, etc.

[fluid ravine]

Haha, yeah again sadly don't got experience with PCB mounted stabs so I don't know much abt em or what works with the wooting plate

[still hatch]

perfect thank you!

im just using a typical redux case and epbt shiro

[fluid ravine]

So do you have a list on what clip ins work fine?
I may need to inquire some knowledge just incase

Can't experience? Just ask questions!

[cold bloom]

Cherry clip ins ftw

[steel hemlock]

Btw stupid question

Thackson

You obviously have a Wooting keyboard right

[fluid ravine]

Yeah

[steel hemlock]

Did you just not claim the role

I noticed a lot of people don't have said role

[fluid ravine]

My board is like a year and a half old

[fluid ravine]

Oh no bc I didn't buy my board, a friend bought it for me

[steel hemlock]

Can't you transfer ownership?

And claim the role that way

[fluid ravine]

It's fine, I dont want to go all the trouble

[steel hemlock]

Cause I just bought one for a friend and made a support ticket about it cause I was curious

Okok

[fluid ravine]

He bought 2 for himself so dunno which one is which

lul

[steel hemlock]

And gonna reuse my lekkers and case from my stock wooting :)

For the module

[fluid ravine]

👍

[steel hemlock]

I'd want to try the PC plate but

Not gonna lie

Jade's on steel plate is actually really crisp

[still hatch]

this is a silly question but since I am doing gummy o ring. I dont need to buy smaller orings for the burger mount right?

[steel hemlock]

Nope

[still hatch]

perfect that saves me some time on shipping then

[steel hemlock]

You won't use any screws for the case

[fluid ravine]

Gummy O'ring mount and Burger mount are two different things

[still hatch]

ahhh that makes more sense

[steel hemlock]

You especially DONT want to screw in your board to the case

That ruins the whole point

[still hatch]

ahh yep

no bounce if i screw it in ahaha

[fluid ravine]

Well not necessarily, traditional gummy mount boards have half circle pcb cutouts for the o'ring to sit on the posts which allows it to give it that bounce when typing. Converting tray mount to Gummy O'ring mount is considered a friction mount, using the o'ring to friction fit the module into the case without having to screw in the standoffs to make direct contact with the PCB and case. But this also means that the pcb will be sitting on the posts or standoffs unless you're using foam that sits higher than the resting points.

[steel hemlock]

Interesting

Didn't know their were boards specifically made for gummy oring mounts

[fluid ravine]

Well yeah, I have explain this before but if you want that bounce you could use some foam that can push back pressure to its inital position like polyfill

[steel hemlock]

I'm just using the stock wooting foam rn

[fluid ravine]

Think of it as a pillow ofc, pushing down the pillow then it slowly pushing back up

[steel hemlock]

Time to get so Polyfill :)

[fluid ravine]

Stock wooting foam is fine, i think you could get similar results but polyfill is more noticeable ofc

From my testing

Also note that wooting's foam is much denser

[steel hemlock]

Just feels bouncier or has noticeable sound diff?

[fluid ravine]

So it can remove so much more hollowness and make the board pop

[fluid ravine]

both

[steel hemlock]

Hmmm

Well I'll just have to try both and see which I prefer

[fluid ravine]

I can make a sound test for you rn

[steel hemlock]

I have some Polyfill somewhere

[fluid ravine]

Just to compare, although i dont have the best switches

[steel hemlock]

Appreciated but it's ok :)

Won't need to buy anything new so

Worth AND fun to try and compare

I got the hang of putting the board in and out since I first gummy mounted it so

[still hatch]

that makes sense now. Thank you!!

[paper bloom]

@fluid ravine Do u want my profile by any chance?

i'll pass u the codes

BUT ITS THE SAME setting

XD

[fluid ravine]

Yeah sure! Might as well take a look

[paper bloom]

Dude its legit bland af hold up

[fluid ravine]

lmao

Did it anyways lul

[fluid ravine]

Wooting foam

Polyfill

God i need new switches ffs

[sweet oak]

I need a new keyboard.. (looks at 80he order summary)

[fluid ravine]

LMAO

[marsh saffron]

Mine should arrive tomorrow

[fluid ravine]

Whatchu getting

[marsh saffron]

Dashes

Tried jades from my buddies 60he in my tofu build and they sounded amazing

Ordered dashes the next day because there was a sale for 20 more minutes

[paper bloom]

They any responsive?

Any wobble compared to the lekkers?

[uneven cradle]

some more frog mini stock being put up on geon's website for the warehouse sale if anyone was interested

not gonna be wooting compatible though

[crimson sky]

those don't work for wootings

was about to say

[uneven cradle]

yeah guess no WK stock left

think most of the stock would have been sold to the korean market first

[red abyss]

This will fit the wooting 60he right?

[red abyss]

I think i just found the one i want if this one is compatible
https://a.aliexpress.com/_EQq6Lub

[glacial wind]

hrm $36 for 90 raw he in korea

[covert vigil]

Has anyone tried black jades?

[prime orbit]

@harsh dove

^^

[median spade]

Ez clap

[elfin garnet]

@polar girder did you get your frog from mechmarket?

[polar girder]

Already sold out lol

[polar girder]

Yeah I put up a WTB and someone messaged me

[polar girder]

Haven’t seen that one. It’s not on this list but looks like it might work

https://wooting-technologies.notion.site/de7a52e2b5a941258a17e448b0c9d9b0?v=5ec0b31c59db4a51b8a86a1288249e9f

[red abyss]

i just checked reviews say it fits the wooting 60he+

[polar girder]

Nice

[red abyss]

Do i have to order anything besides the case?

[polar girder]

No

[red abyss]

Ok ty

Guess ill make myself poor now

[red abyss]

man i only wanted to buy a keyboard and keycaps and now i spent almost 400€ already

[tawdry tree]

Don’t we all? 😂😭

[spiral canyon]

https://tenor.com/view/simpson-gif-25340727

[calm pulsar]

found a gasket mounted case on AE

have to drill the plate though

or make a custom one

[crimson sky]

I feel like I have seen that case before

got a link/name for it?

[calm pulsar]

https://sl.aliexpress.ru/p?key=Gkk4stR

here's a link from my region, you'll need to change region/language

[crimson sky]

ah

thought of a different one

mmh, no plate files sadly

[calm pulsar]

the bezels kinda too large for my taste

maybe they can provide the plate files in dms

[crimson sky]

maybe

if you can get them I can help you make a wooting compatible version

[calm pulsar]

oh so you can make plates yourself?

[crimson sky]

yae not that difficult

[elfin garnet]

How much did you end up paying? If you dont mind me asking. Considering getting a black one as well so I have it for whenever Cosmos is out

[calm pulsar]

that's great
well for now i'll be building in my fb60 and also want to check out wootings friction mount thing, but it's good to know that someone can make custom places

[polar girder]

$300 shipped

Which is what I put the WTB for

[elfin garnet]

Alright thanks g

[polar girder]

And a dude hit me up and said “I have two. I would sell you one” lol

Word

[crimson sky]

300 for a frog mini?

[polar girder]

Yeah

[crimson sky]

was it built?

[elfin garnet]

I paid 279 for mine with one set of tadpoles and one set of feet. That's without shipping. 300 is not bad if its in good/near new condition imo

[crimson sky]

I paid 230 for mine

[elfin garnet]

yeah I wish. I bought it directly from Geon too

[polar girder]

No lol

Just case, tadpoles and carry case

Yeah with bumpon feet and looks pretty pristine

I missed a couple opportunities to buy some at $275ish and was just tired of fking around lol

Cut the weight of the viper v2 pro in half lol

[tidal frigate]

Can you mske it 8x weight?

[barren abyss]

and only usable for Fingertip-Grip 😄 not my cup of tea, but nice.

[polar girder]

Yeah I’m a finger tip guy

[gleaming crow]

Anyone have some recommendations on where I can pickup some keycaps in Canada without crazy shipping costs

[polar girder]

The ultra lightweight just feels so natural

[red abyss]

🤝

[austere creek]

cool plugin card

[unique adder]

yall i need help

im buying a ergotron lx monitor stand but idk if its comaptible with my moniotr ( alienware AW2523HF) like idk the vesa stuff like are they compatabile ??

[austere creek]

if the monitor and stand have the same vesa support they fit

[unique adder]

idk if they do i can send pic of the monitor but like its weird on aliewanre

is this vesa

[crimson sky]

they have an adapter plate

look in the packaging

[unique adder]

wym

like the stand or?

[crimson sky]

no

there is a piece of metal

that you put on the monitor

[unique adder]

it doesnt come with metal tahts the thing

[crimson sky]

that has a vesa mount

[unique adder]

alieawnre is weird stand

[crimson sky]

dell ALWAYS packs it with their monitors

[unique adder]

ill show u

[austere creek]

in the box of your monitor m8

[crimson sky]

I know how their monitors work

[unique adder]

what do i take pic of

[crimson sky]

they include a plate that goes on the rear of your monitor that adapts to vesa

[austere creek]

you go to the box the monitor came in. open it. get the metal plate out

[unique adder]

there is no metal

literally

[tidal frigate]

?

[unique adder]

or idk how it looks like

[austere creek]

id be surprised if the 4 screws in the recess are for the 100x100 vesa mount

would be unlike dell

[crimson sky]

ah wait

[unique adder]

so is it compatble?

or not

[austere creek]

according to the website it fits vesa 100x100

[unique adder]

so i take them off?

[austere creek]

yeah but they look like youd squish the plastic and idk if thats 100x100

[crimson sky]

you know, easy thing is checking the manual

[austere creek]

from what i know from dell you get some adapter piece usually

[crimson sky]

yea

[unique adder]

i got some cables

and mount

and a book

and how to built

and thats prety muchn it

i thimk

[crimson sky]

the screws are apparently it

[tidal frigate]

Hmm

[unique adder]

okay so i just remove those???

[austere creek]

interesting

[unique adder]

wait

so if its 100x100 its compatible?

[crimson sky]

yes

[unique adder]

with the ergotro n lx

[crimson sky]

it is 100x100 compatible

[crimson sky]

my man

[unique adder]

so im good??

[crimson sky]

are you able to read something on your own

[austere creek]

why is this in keyboard modding anyway

[unique adder]

idk where else to ask

[austere creek]

tech talk

[unique adder]

oh my bad

[austere creek]

the talk about... tech

[glad iris]

When I switch out my Lekker L60 on my Wooting 60He+ for any other switches, do I keep my 4 year guarantee

and is the PE Foam mod safe on ther woooting 60he+