🔧│keyboard_modding

[cold bloom]

Agreed. I think the l60s are my fave springs for he switches that I’ve tried so far but I ordered black jades so wanna try those two stage ones out

[hard moon]

i'll buy some black jades too, but only for some more wobble reduction

[cold bloom]

Not the worst I’ve seen

[hard moon]

time to copy @harsh doves Frankenstein switches

the wobble on the Jades is impressively less compared to the regular L60's

[harsh dove]

Tbh idk if it’s just me but every set I’ve received has either been perfect or ever so slightly tossed around like a couple keys

And it’s funny cause where I live is not exactly smooth roads

[marsh saffron]

cant wait for my dashes

[fluid ravine]

all my alphas keys were all tossed around when i recieved my set ;-;

my roads are smooth

[harsh dove]

Yeah I swear my sets are never tossed around like crazy

[fluid ravine]

pretty sure like almost more than half of my alphas keys were like flipped sidways or upside down lol

[harsh dove]

[cold bloom]

Same with the roads here lmao

[polar girder]

CLEAN

AF

[cold bloom]

Thank you lord bigsly

Means a lot

[harsh dove]

Yeah this is pretty good

In terms of being tossed

That’s probably about as bad as mine ever get

[cold bloom]

yeah I'd take that lol

I wonder if they could mold a case for them like the pbtfans trays but maybe outta some kinda like hemp plastic

or something that will meet their regs

these definitely sound a bit brighter than the pbtfans abs keycaps, I see what alexotos was saying when he mentioned that before

it's a really satisfying sound tho

[fluid ravine]

oh man thats nice

[cold bloom]

Nightlight on the iPhones is so cool lol

Or night vision or w/e it’s called

[exotic inlet]

Is that 60he with custom case?

[cold bloom]

salvation case!

it's the business grey but it looks rather black in most lighting lol

[fluid ravine]

The lighting is noice

[quiet bay]

that keyboard looks nice

[fluid ravine]

fr

[quiet bay]

I tried out snappy tappy btw

idk if I feel a difference 🤔

[cold bloom]

rappy snappy? LMAO

[quiet bay]

rappy snapty

ljahsdfkljseve

[cold bloom]

LMFAOOOO

[quiet bay]

AHHHHHH

[cold bloom]

[quiet bay]

I just mixed up rappy snappy and snap tap

[cold bloom]

that just sounded so funny

snappy tappy

[quiet bay]

it's cause Im half asleep and read the twitter post about it 😭

[cold bloom]

where did you try it?

did you download the beta?

[quiet bay]

osu and valorant

[fluid ravine]

LMAO

[quiet bay]

I kinda have to get used to it though since strafing requires me to press the other key down more

[cold bloom]

yeah ive been trying to get my brain used to counter strafing more often lately

but it takes some time

[fluid ravine]

Yeah esp ever since i got my wooting

took some time to get use to it and notice a difference

New era has begun

[fluid ravine]

Honestly, it's like when u get use to some thing you dont notice it, but when u downgrade yourself back to what you were using before you notice a big difference.

It's like going to 1440p back to 1080p

Worst time of my life when looking at a screen

[quiet bay]

I've still yet to get to 1440p 😔

[fluid ravine]

Same :c

[cold bloom]

I just switched to a 1440p 360hz oled a few months ago I love it

[fluid ravine]

I mean you could also like try to play on your typing profile and compare it to your rapid/RS profile

[cold bloom]

I had the 360hz zowie before

[fluid ravine]

You can clearly feel the difference

[cold bloom]

which was insanely good for gaming

but I didn't watch anything on it

cause it wasn't as nice

[quiet bay]

my typing profile and gaming profile are the same lel

[fluid ravine]

deadah?

[quiet bay]

yes

[fluid ravine]

the hell

[cold bloom]

lol wtf

[fluid ravine]

no Rapid?

dasmn

[quiet bay]

with rapid

[fluid ravine]

even for typing???

[quiet bay]

I just use it to type and play game

ya

[fluid ravine]

dafuq

[cold bloom]

https://tenor.com/view/jail-right-to-jail-right-away-parks-and-recreation-parks-and-rec-gif-16177531

[fluid ravine]

I have 2 profiles on my board

one typing one gaming

[quiet bay]

https://tenor.com/view/my-apologies-cheese-kitty-cat-sorry-my-bad-gif-1026852287997442026

[quiet bay]

too lazy, 1 profile is enough for me xD

[cold bloom]

this profile is one of my faves

[fluid ravine]

My fn H is my typing and my fn J is my rapid

[cold bloom]

for ow2 mostly

I can use controller input to move

[exotic inlet]

Looks cool

[cold bloom]

super fun in ow2

[fluid ravine]

interesanteee

[quiet bay]

rgb looks nice on my cerakeys >:D

[untold wigeon]

Dude I can’t type for shit on my gaming profile. So many spelling errors lol

[cold bloom]

there's a setting in ow2 to lock the input shown on screen

[fluid ravine]

fr

[cold bloom]

so it doesn't flip controller to mouse

[quiet bay]

except I dont use rgb

[exotic inlet]

Crazed cerakeys are impressive imo

[untold wigeon]

Crazed are nice but I like my indigo ones better. Plus they diffuse way more light.

[quiet bay]

crazed is a bit thicker

cuz extra coating

[cold bloom]

def a bit brighter than the other keycaps

but I still really fk with the sound

[fluid ravine]

oh waittt i like thiss

[untold wigeon]

That video is 0 seconds long for me

[fluid ravine]

That is def brighter

[cold bloom]

LOL might still be uploading

[fluid ravine]

Dude main these caps this slaps

[marsh saffron]

dang, works for me

[untold wigeon]

Oh ok. 👍

[cold bloom]

It doesn’t play for me on mobile

[fluid ravine]

[cold bloom]

For some reason

[fluid ravine]

https://tenor.com/view/lebron-sunshine-lebron-james-sunshine-sunshine-lebron-you-are-my-sunshine-you-are-my-sunshine-gif-509896211431970290

So bright I love it

[cold bloom]

Same 🤣🤣🤣

[fluid ravine]

Yoink my sound test now

im gate keeping

FK

o wait nvm

[cold bloom]

Hahahahahahah what

[quiet bay]

Yoink the keyboard itself instead 😏

[fluid ravine]

U RIGHT

[fluid ravine]

I usually like download sound test and send them to my alt account so i can gate keep them

or anything that has useful info i just send it there

Like this for example lol

random shi

[marsh saffron]

i just use a discord server for this

i put stuff there to remember for later/check what photos look like before i send them to servers

[fluid ravine]

I miss this :(

[quiet bay]

go back to foam 😎

[fluid ravine]

Time to downgrade back to the all days

lul

stock case go hard fr

[polar girder]

Frfr

Ong no kizzie

[quiet bay]

can always upgrade that switch 👀

[fluid ravine]

👀

Honestly getting a new set of switches may be my last purchase for a while on my board

It's prob where I can say that the switch will define how my board will sound no debate

clack, thock, neutral, all depends on the switch now

Pretty sure i need something really high pitched, my board is pretty low on the frequency chart

[mortal pine]

Anyone hear about resolving their cerakey spacebar sticking by lubing stabs?

[fluid ravine]

Thats new?

[fluid ravine]

Usually we would have keycap stab binding between stabs that has thicker housing for the wooting plate like staebies and TX ap rev4 clip ins

But since you specifically said cerakey all i can think of is the spacebar being too heavy for the switch or your lube/grease has gotten under the stabs on the pcb which makes it sticky causing the stabs to have a bit of a delay when returning to its inital position

[mortal pine]

Ya know I think you're right and it is simply the weight plus the extra friction from unlubed stabs. I was wondering why a standalone 40g switch is able to easily lift the spacebar but not the one in the Wooting but I realized the switch in the wooting has the weight of the stabs plus the friction working against it.

My cerakey spacebar won't return whatsoever on the stock wooting. I'll give the stabs a good lubing and/or switching to better screw in stabs to see if it helps.

[untold wigeon]

It won’t return because the spring is too weak. At minimum you need the stock L60 spring to lift it. I’d suggest an 80-100g spring.

@mortal pine

[cold bloom]

yeah I think it kinda sets the base, I was surprisingly shocked when the fr4 plate and the keycaps changed the sound as much as they did but I think the switch determines how far it can go etc

[untold wigeon]

Reading your comment more thoroughly I guess a dry stab could contribute but I’m certain your spring is more likely the culprit. 55g is required at a minimum. I found in my testing that 60 was doable but had return problems. I regained normal spacebar function after installing 100g spring.

[median spade]

I love seeing everyone get into keyboards because of Wooting

Fun seeing everyone experiment what we been doing on the MX side

[untold wigeon]

It’s fun, but stupid expensive

[median spade]

Oh don’t I know it

Used to have a spreadsheet of my total spent and sold

Stopped counting after a while but it was pretty bad haha

[tawdry tree]

cute

[harsh dove]

Pink jades

[cold bloom]

The keyset takes its colors and legends from the vintage Halleffect Keyboard by Micro Switch. The sub-legends on the alphas are ASCII control characters, an early method of issuing commands to a computer.

just realized the Ascii keycap set has a cool history for the wooting lol

[polar girder]

Yeah Wooting probably my first and last custom TBH

unless my wife needs something for work

What’s ASCII lol

[cold bloom]

I have a feeling I'm gonna end up with a bunch of mx keebs and the 80he eventually lol

[cold bloom]

it's those grey keycaps I put on earlier

I guess it was a language one of the first hall effect boards used for input or something too

[polar girder]

Ah

https://novelkeys.com/products/sa-ascii-keycaps

Goodness

[cold bloom]

yes sir

I saw those on a few posts on reddit too

just not a fan of SA myself

I think it looks dope tho

[polar girder]

I’m kind of digging SA

want to grab some black on grey

[cold bloom]

I think that new mtnu profile looks interesting

[polar girder]

With a grey nylon plate

Yeah it is neat

Fairly shallow tho

[cold bloom]

true

[polar girder]

I like the SA depth

But I like the flat aesthetic and everything else about it

Once they drop the legends I’m sure they look fire

[cold bloom]

https://www.deskhero.ca/products/gmk-cyl-mtnu-susu-keycaps

[polar girder]

Black on Black I think they’re planning

[cold bloom]

kinda gives me typewriter vibes

the top profile looks so satisfying to type on lol

[untold wigeon]

@polar girder dm me I’m ready when you are

I love the big finger bowls on the SA caps. My favorite.

[leaden sinew]

based on what i read in the FAQ, is the best 3rd party pre-lubed switch in terms of compatibility and all that the jade / dashes? at this point at i cant use un-lubed switches due to preference and im much too lazy to lube my own switches anymore after experiencing the quality of higrounds geo linears. i read a little bit into the magnet compatibility and all that but admittedly didnt know what any of it meant lol

[tawdry tree]

Most magnetic switches come pre-lubed, the sound is the main thing you should consider.

[leaden sinew]

yeah i like the sound of the dashes and the stickyrices but ive heard the sticky rices are especially unreliable i guess? i have never used / built a magnetic keeb before so i dont really know how to tell what that even means / looks like so im just trying to get the best option overall

unless the lekkers come prelubed too? i cant see anything about them being lubed but i saw in the batch update channel that they are doing a v2 of them and dont know if thats what would come if i ordered them rn (im getting a module and alumaze so i have to buy them separately on the site)

[polar girder]

Yeah I would skip sticky rice

Prob dash, jade or lavender or raw HE

Lekkers are good

Most factory line is just a swipe on the stem

But that’s the bare minimum

Some are better than others

[leaden sinew]

would you say overall 1 to 1, dashes are better than lekkers?

[polar girder]

Pretty sure dashes are just a jade recolor

And most people seem to prefer it to the lekkers.

Just a sound, feel difference but lekkers kind of being the first one, most newer HE switches are an improvement

[leaden sinew]

in terms of performance tho i wont really have an issue with the dash / jades? i know they have a slightly tighter top to bottom distance so idk how that would affect the performance, im assuming it just means i have less actuation points and release points to work with, but the switch itself still works fine?

[polar girder]

Yeah they’re all the same performance wise. Yeah just little difference in total travel and spring weight

Well not ALL the same. Hence avoid sticky rice lol. But yeah

[leaden sinew]

bet. appreciate you!

[quasi current]

@swift hatch tape mod, Aluminium Keyboard Case, lubed up switches, burger mount, new keys, new foam if you want, new switches

Wooting on their youtube does a good job in tutorials but BadSeed Tech can go a bit more in-depth in vids

https://youtu.be/igy_n3f7VeI?si=rZs7QFJwY-lGeWfk

[swift hatch]

thank you

[quasi current]

no worries

[tawdry tree]

Anyone here have a Q1 HE and a Woot? Please lmk!

[quasi current]

the new tofu cases dont need you to shift the module a likkle left a bit

when you watch youll understand what im saying

so dont worry about that if you see the video above

[swift hatch]

oh okay

thank you, im just looking for anything to purchase while im waiting for my 60he+

[normal schooner]

I heard the thockfather send his q1he back because it sucked

[tawdry tree]

Yeah heard that too 😂😂

would’ve asked him otherwise

but need to confirm something

[swift hatch]

is it worth it to upgrade stock 60he switches to jades?

(no idea what switches stock has lol)

[normal schooner]

if u want lighter switches then the stock ones yes

[quasi current]

stock has lekker 60s

jades are nice

[normal schooner]

however some people like even heavier switches

[swift hatch]

i might just wait until it gets here and see how the lekker feels then

anything is really an upgrade from my current keyboard

[quasi current]

☝️

[harsh dove]

See how you like the board first then decide if you wanna get some modifications later

[cold bloom]

Fack

[polar girder]

FACK

[steep veldt]

SYN

[polar girder]

lol

[cold bloom]

LOL

[swift hatch]

shoulda been r2d2

[cold bloom]

I was just thinking the same thing lmao

[untold wigeon]

Oooooh. Look what just showed up on eBay.

https://www.ebay.com/itm/326178899453?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=J4Dc86MJSsm&sssrc=4429486&ssuid=8hmdpzngt6k&var=&widget_ver=artemis&media=COPY

[cold bloom]

that's super clean

[harsh dove]

Yeah GMK Stealth goes hard, I’d want the novelties too tho

[tidal frigate]

Because of special letters?

[untold wigeon]

@tidal frigate These.

@harsh dove ⬆️ ⬆️ ⬆️ those are super awesome

[harsh dove]

^

[cold bloom]

okay that's dope

[untold wigeon]

Wuque Studio jacking up prices on the Dash switches on AE

[dawn stag]

170 is insane for keycaps

[untold wigeon]

Pretty standard for GMK

[tidal frigate]

Isint it only available on aftermarket?

[uneven cradle]

$120 is standard base price for GMK, in stocks usually higher

[untold wigeon]

That set, yes. They are out of production.

[untold wigeon]

Yes true. I meant for out of production, only available second hand $170 is pretty average

[uneven cradle]

Yeah stealth is a pretty in demand set too

[fluid ravine]

FACK

[untold wigeon]

Most definitely. Those caps could make any keyboard look awesome.

[elder gazelle]

Hey, looking for keycaps like this ? Someone know some good

[untold wigeon]

I have a set just like that in purple gradient

[dawn stag]

a bunch on aliexpress

[untold wigeon]

https://a.co/d/fUYuyXL

That link I posted has a few different options

That exact set is in the link.

[polar girder]

I can sell you some like this that all black

Cheap

Just took them off and switched to diff profile lol

That’s not the stock space bar tho lol

[untold wigeon]

Did you get your SA caps?

[polar girder]

Yeah

Might order black on grey tho

But then also debating grey nylon plate

And or CF plate

And also going to get swag knight stabs

And after just spending $400 kind of want to chill and just enjoy it tho lolzzz

The keycaps were cheap

But WoB looks kinda fire and I’m digging SA

[untold wigeon]

I love SA. So comfortable to type on.

[polar girder]

Yeah I’m liking it so far

Feels super natural

[uneven cradle]

WoB

[polar girder]

Turned RGB off

I like it while gaming too

[polar girder]

Clean

[untold wigeon]

I wish I could get Cerakeys in SA profile. That would be game over on buying keycaps.

[polar girder]

Commissioned a custom cable too

Going full hog

Never thought I would go this deep

[uneven cradle]

Gotta send it

[polar girder]

But I should’ve known lol

Pumped this cable tho

No quick disconnect all black 8-core IEM cable

[untold wigeon]

https://tenor.com/view/cbz-gif-27104348

[polar girder]

https://tenor.com/view/hyped-happy-yessirr-yes-sir-lets-go-gif-17289987

[untold wigeon]

Wifey asked what I wanted for my birthday in a couple weeks. I told here these. GMK Bento R2 revival, Pulse, & Blurple. Any of them would be sweet

[uneven cradle]

I'm pretty much replacing everything soon 👀

[untold wigeon]

Only parts of my original Wooting I have left is the Stabs and PCB lol.

[uneven cradle]

I got a frog mini coming probably swap out to dualshot keycaps then 80he coming after that

[elder gazelle]

This I have too 🙂 but looking exactly this gradient 🙂

[polar girder]

Yeah I’m happy I don’t want any other form factor than 60%

So I can pimp this thing out then move on with life lol

[uneven cradle]

Not sure what I do with my tofu60 might grab a wooting module or just a generic pcb for it

[polar girder]

https://kbdfans.com/products/pbtfans-neon-r2

Kinda nice

[prime orbit]

My switches were supposed to be here today. AliExpress ain’t looking too hot for first time buy 😭😭

[untold wigeon]

I’m in United States and anything from AE takes at least 3 weeks

[prime orbit]

It said today tho

They gave me a $1 for not being here today lmao

[untold wigeon]

https://tenor.com/view/please-sad-spongebob-puppy-face-gif-19536863

[prime orbit]

How nice

[uneven cradle]

Aliexpress is always a buy and forget kinda thing

[prime orbit]

Yeah I’m just gonna buy from actual sites from now on

[untold wigeon]

Haha. I’ve gotten that dollar like 4 times

[prime orbit]

Even tho the AliExpress store was the actually company

[uneven cradle]

Although I've had them arrive in ~1 week sometimes

[prime orbit]

So weird

[untold wigeon]

Who do you have naked pictures of at AE???

[cold bloom]

I really like these too https://kbdfans.com/products/pbtfans-kabuki-cho-r2

the pbt fans translucent keycaps are so nice

I love the ones in my vior set, there's like sparkles in the clear purple top then a beige dualshot underneath it's so nice

I might have to try and get the xray keycaps whenever they restock

[untold wigeon]

Those are nice.

Get ready for next week people!!

[prime orbit]

Keyboards?

[untold wigeon]

A little bit of everything. Keebs, caps, accessories.

[prime orbit]

Ah ok

Is it a drop or they just releasing them daily?

[untold wigeon]

Some stuff is in stock some are drops.

[halcyon lagoon]

yall have stabies suggestion for wooting?

[untold wigeon]

How are you mounting them?

[cold bloom]

@harsh dove might need this if I get dualshot https://spaceholdings.net/products/dualshot-2-cables?variant=43836477276418#additional-information

[fluid ravine]

Oh damnn thats sick

i didnt know they make cables based off of gmk keycaps

I know theres some for pads but gah damn

thats clean

[cold bloom]

yeah they do some dope cables

[cold bloom]

This kinda goes hard

[final widget]

Are these custom cables worth it? Do they change or make better anything performance wise or they are just purely aesthetic?

[fluid ravine]

aesthetics

Fyi for wooting tachyon mode, your cable needs to be 6ft or shorter for it to be compatible, anything longer could freak out the board and mess with your pc windows/tabs

[final widget]

Not even a tiny bit better performance/connection?

[sweet oak]

Just style

[final widget]

6 ft I’m playing from my bathroom then 😂

[fluid ravine]

Lul

[sweet oak]

Cant even use a coiled cable (first world problems)

[final widget]

Any good cable makers? May look into it but I don’t like the coiled cables with the big aviators 🤢

[harsh dove]

The idea behind a QDC cable is for people who frequently change their setup and/or keyboards. (like myself)
It’s not only for aesthetics, it’s also for quality of life at your setup without having to change out entire cables, get under the desk/behind the computer etc.

Most people do just buy them for aesthetics though and don’t fully use them for their intended purpose.

And there can be a performance difference if you get a low quality cable, I.e tachyon mode on Wooting boards may not work with lower spec cables. I’ve had friends with cheap cables get random key presses on their boards, RGB Flickering, etc etc

[cold bloom]

My PC is just too far for 5-6 ft usb cables to reach so I use a ugreen usb extension and then just leave my rgb off or use it lower and it works fine

[harsh dove]

I hear Space Cables is pretty decent, I personally only use Wooting Cables or get customs from Randall @ WiredIn

[final widget]

Interesting! The reason I asked also cause I saw a video of someone reviewing 60 and said they couldn’t use tachyon cause of their cable aswell and tbh not sure if I will use it but I don’t want to be limited if I would like to.
Could you recommend any good/trusted cable makers? If anything I’d make a basic black one.
I did see also that usb can be silver or gold(which is more expensive) any particular reason for that?

Are wooting cables good generally? Or would you recommend me to make one anyways

Also could you link wired in? Not heard of them before

[harsh dove]

Wooting Cables are guaranteed to work, so there’s that.
If you want a custom, it can get expensive depending on what you go for and I’d shoot for 6ft or shorter because that also affects things like tachyon mode, and keep in mind coiled cables have most of their length wound up in the coil itself so be mindful of that.

Silver and Gold Connectors are - well I’ll just refer you to this picture lol

Wooting Cables are pretty solid and come with straight and coiled in a single kit for around $50 USD and they just released some new colorways as well.

If you really want something personalized and custom and have the budget for it. Then WiredIn makes some insane custom high quality cables.

[dawn stag]

womier has pretty decent cables

[harsh dove]

https://wooting.io/product/detachable-cable?Color=Stealth

https://wiredinstore.com/collections/premade-in-stock/premade
@final widget

[verbal reef]

does anyone have any recommendations on a good 60HE case

[paper bloom]

@harsh doveIs the Lekker v2 going to be closed or open bottom if you know

[paper bloom]

Tofu 60 redux the salvation case

You can run just about any case depending on your needs and wants

[paper bloom]

Nvm i answered my question myself thanks again

[verbal reef]

thank you

[paper bloom]

SO LONG AS

IT IS COMPATIBLE

https://wooting-technologies.notion.site/de7a52e2b5a941258a17e448b0c9d9b0?v=5ec0b31c59db4a51b8a86a1288249e9f

Sorry caps

Just incase if i miss out anything you can see it here ^

[final widget]

If anything I’d go for 2ft. I generally don’t like the coil look so I’d go for a straight one preferably with the small slim connectors I’ve seen(don’t like the aviator look, it’s very bulky and unnecessary).
I see, so if you’ve tried or what would you say is generally better, gold or silver.

[harsh dove]

You speak my language lol, I prefer straight cables too and I agree the Aviator connector is ugly imo LEMO/FEMO all the way lol but some people like the chub connectors

As far as connectors being gold or silver, gold is more resistent to tarnish and corrosion so if you care about that or live in a more humid enviroment

[final widget]

Lol ! Now what’s better lemo or femo 😬 so gold it is then I guess right? I mean I live in dubai and in summers it’s hot/humid

[harsh dove]

Femo are just fake Lemo basically

They're exactly like Lemo pretty much but just not genuine Lemo

Usually diff materials

The housings are made of chrome-plated brass (LEMO), which is why they only come in 2 colors (from the factory) and then 3rd party cable makers can cerakote them or whatever they wanna do

Femo are usually made with aluminum

[final widget]

Naa if I’m going to make one I’m just gna buy the best, cba with all the other stuff

[harsh dove]

Basically how I roll

[final widget]

Well Mr @harsh dove , pleasure speaking to you and thank you for being so informative and helpful as always 🤝🏼 I may hit you up later when I’m making it, to get the best if that’s cool

[harsh dove]

Yeah, my pleasure, hmu whenever

[cold bloom]

I love my wooting cable but I wanna get a nice lemo one soon

are those wiredin ones lemo @harsh dove ?

I really like the look of some of them

[harsh dove]

He uses both

It'll tell you

Can also just request for a LEMO

[cold bloom]

oh dope thank you

[uneven cradle]

real LEMO are on the pricey end

[harsh dove]

^^^^

[uneven cradle]

in saying that I want to get a matching custom straight cable for the raw

[harsh dove]

Yeah I mean just the LEMO connector alone before even building a custom is $99

[cold bloom]

what do you guys think of f and j keycaps with the bar on them btw

I've always liked them cause I can find my neutral kinda position

[harsh dove]

Bars for aesthetics, dips for feel

[split fractal]

So I just tape modded my wooting, need opinions on if it sounded better stock vs tape mod

[cold bloom]

real

[split fractal]

tape modded

stock

[cold bloom]

oh wow it sounds a lot better than stock for sure haha

stock was so loud

[split fractal]

i think the fact my mic is now on an arm vs desk stand also helps with the sound too and give it more justice 😂

[cold bloom]

these gmk keycaps have me sold btw @harsh dove

I know they're pricey but they feel so nice

and sound awesome

I can kinda see the difference in the legends next to my kbdfans ones that don't have symbols on the mods, the vior set with the symbols on the mods looks a lot cleaner

[steel hemlock]

Ok am I doing something wrong

I’m trying to put on my gummy oring

Mech.lands medium

And I just can’t

Doesn’t seem to fit right

[cold bloom]

looks fine

the standoffs on the edges kinda prevent it from sitting in the gaps like a real oring mount

[steel hemlock]

Do I have to force it in?

[cold bloom]

you might have to press it into your case a bit

but it shouldn't feel too hard to press in

[cold bloom]

yeah that's not right lol

[steel hemlock]

I mean anymore force and it doesn’t feel normal

[cold bloom]

can you try and press the oring in from the bottom

like press it in with your finger nails or something pointy

and see if it goes in easier

[cold bloom]

also the right side near the backspace you'll have to make sure the oring goes in first

[steel hemlock]

I can but it just

Pops out

[cold bloom]

weird

it does look like its a bit wider on the assembly than mine was

try stretching it out?

[steel hemlock]

Do I have to remove any screws?

From the pcb

[cold bloom]

not usually cause the plate has standoffs anyway

so it'll still be there

the one near the top right near the backspace is the hardest one

you gotta kinda insert the left side first, then press the oring in from the top right first

then press the bottom in if needed

[steel hemlock]

Yeah I don’t get it 😭

It’s easy to just

Wrap around

It isn’t that tight?

[cold bloom]

if it isn't too tight you're just gonna have to press it into the case better

try getting it in from the top first

so put the usb side in then you'll see the standoff near the backspace it kinda warps the oring out

press that in and down into the case first

then push the assembly more from the bottom

if the oring hits the case press it in with your finger nails so it goes in below the plate

and then try pressing it down in

[fluid ravine]

@steel hemlock i can try to make a vid for you but im in a game rn so i may need a few mins lol

[steel hemlock]

I got it I think

[cold bloom]

W

[fluid ravine]

dub

[steel hemlock]

But the spacebar sounds ass now

[cold bloom]

make sure its in as far as itll go

press down all the corners

[steel hemlock]

If I press on the bottom the top goes up a bit vice versa

I don’t think I can realistically put any more force on it

[cold bloom]

yeah it's probably a soft oring

[steel hemlock]

And I’m fairly rough with my electronics

45A

So pretty balanced

[cold bloom]

sometimes the space will sound a bit better with the back of the assembly pressed down

and the top lifted a bit

[steel hemlock]

Before putting in O-ring

[visual sonnet]

i know i sent this before, but upon listening to it again i feel my stabs are a bit messed up. I’m having trouble deciding whether it’s the L60s, being notorious for its rattle, or the stabs being weird

i’ll send another one when i’m home again

[steel hemlock]

After putting in oring

The sound was fairly consistent on both endsbefore putting in oring

[fluid ravine]

Dom you have the 60he+ right? and what stabs?

[steel hemlock]

Found the issue

[fluid ravine]

LMAO

[steel hemlock]

Plate mounted

[fluid ravine]

alr alr

gimme a sec

just finished

[polar girder]

it's called friction mount for a reason. it doesn't slide right in

[fluid ravine]

heh but mine does

:P

[polar girder]

yeah plate mount stabs good for friction mount

lol yeah if there's no plate foam or anything it kind of does

[steel hemlock]

Uh

Guys

[fluid ravine]

sup

[steel hemlock]

How do I take my board out

[polar girder]

that's the tricky part

[fluid ravine]

You got the prebuilt 60he right?

[steel hemlock]

60HE+

But yes

[polar girder]

gravity and using the big space bar slot

[fluid ravine]

if you have the prebuilt with the stock plate then you should be fine with this method

take a switch puller

[polar girder]

but it's not easy sometimes

[fluid ravine]

and hook it under the plate where the spacebar is and pull up

[steel hemlock]

Holy shit

We got it

[polar girder]

nice

[fluid ravine]

lesgooo

alr gimme a min

im making the vid for you

[steel hemlock]

I’m so lost

[polar girder]

but yeah i'm not a huge fan of friction mount cuz it is kind of tricky lol

[steel hemlock]

Yeah idk

After this

If I ever meet a girl named friction

I don’t think I’ll test the waters

PTSD

[visual sonnet]

idk if the stabs are rattly or i’m going insane

[steel hemlock]

Screw mounted?

[visual sonnet]

yep

[steel hemlock]

Maybe you’re having the same issue as me 😂

Oh then idk

[visual sonnet]

what’s your issue?

[steel hemlock]

Likely stabs

For me it’s oring mount

Screw stabs were fine

Screw mount*

[visual sonnet]

would like multiple opinions, so i’ll wait for what others say too

[steel hemlock]

I’m having a completely seperate problem, just similar result to yours

[visual sonnet]

ah i see

oh yeah, also physique reveal too ig

[polar girder]

"ig"

like you're not hella zoomed out and you're the majority of the shot

[steel hemlock]

😂

[polar girder]

lol just trolling

🙏

[visual sonnet]

LMAO

[steel hemlock]

Guys

I managed to get the oring in correctly

[visual sonnet]

its because i have an AC unit, so i have to tilt it away so i can reduce the "MMMMMMMMMMMMMMMMMMMMMMMMMM" sounds

[fluid ravine]

Just to keep it simple on how I would do it with one handed xd

[fluid ravine]

Mb bout my wording
Was rushing the vid to be 1 min as I don't got nitro

[fluid ravine]

So the main idea of this would be that beaware there is 2 standoffs on both side of the plate and pcb that will be pushing out the o'ring, you would need to make sure that does get pushed in between the pcb and plate as those would be pushed above the plate more easily.

[steel hemlock]

Yeah mine doesn't seem to slot is as easily as yours but after a few tries I managed to slide it in without anything "spilling" out

I pushed it in a similar fashion do yours

[fluid ravine]

I recommend starting with one of those standoffs either side while inserting the whole top module with the oring into the case, then also pushing in the other side of the o'ring for the other standoff. Once you push both sides in, you will be left with the bottom side of the module with the oring. Take something or with your thumb and push the oring in between the plate and pcb evenly and as you push it in, push the module down so it can be inserted into the case.

[steel hemlock]

Never mind I lied..

\

[fluid ravine]

Once you get it in, check if there's any o'ring that is sitting above the plate

If there is, take it out and retry

[fluid ravine]

or you can take something like a card and push it in

@steel hemlock should be no sign of oring being above the plate

[steel hemlock]

No sign of spilling anymore :)

[fluid ravine]

If it makes it a little bit better on what it looks like for me

[fluid ravine]

Nice

If you notice that any of your stabs sound weird like space bar or backspace then something wrong with the oring

[cold bloom]

@steel hemlock do you have any plate foam in?

it might work a bit easier without

but idk how it'll sound

[fluid ravine]

Or you can the outer bit like i did

thats how i got my silicone to work

and also made the mounting easier

[cold bloom]

OH it's silicone

that would explain it

might would only fit in my tofu with the poron foam

stock anyway

[steel hemlock]

I have the stock wooting foam

[cold bloom]

oh okay

that sounds a lot better tho

[steel hemlock]

The only thing I notice is one side of the space bar is a bit more rattly sounding but that was the same as before the oring

So I'll just need to grease it or something idk

[cold bloom]

yeah mine still does that a bit

[steel hemlock]

But yeah it does a big difference

I like it

[cold bloom]

just soak it in dielectric grease

that's all I've been able to do

it'll come back slowly just keep it greased

[fluid ravine]

there we go thats better

[fluid ravine]

gj

[steel hemlock]

This was plate mounted

The quality is ass because Im recording off a wifi app from phone cause my webcam isn't plugged in

[cold bloom]

that sounds nice too

[fluid ravine]

Voice reveal on the server? 👀

[cold bloom]

the mic makes it sound a bit more hollow than I think it really does

OMG THACKVOICE

[fluid ravine]

But it also shows the difference a bit more

[cold bloom]

HIS VOICE EVEN THACKS

[fluid ravine]

LOL

[cold bloom]

bro can you read me a bedtime story

[steel hemlock]

SM7B GoXLR is a pretty baseline mic for this kind of thing. If anything it's the ikea desk with no deskmat lol

[fluid ravine]

I mean think abt it when you tray mount the board, the pcb makes direct contact with the case which would mean the sound reverb would go boucning in the case and travels through the case which would make it sound a bit hollow unless you use a dense foam

[cold bloom]

yeah I have an mv7 which is similar ish

I use the sm7b foam on it tho

[fluid ravine]

o

[cold bloom]

I like how it makes it sound

gives it a bit more of a dense foam for the plosives

[fluid ravine]

puh puh

[cold bloom]

peter picked a pickled pepper

[fluid ravine]

Ping Pang Pong

[steel hemlock]

Ok enough keyboarding on a 1AM friday night before work

Thanks SO much you guys for the help

[fluid ravine]

lul

No problem anytime

Let us know if you got anymore questions or problems

[steel hemlock]

I probs would've figured it out EVENTUALLY but man just getting it done like you guys said made it so much faster

And the spacebar trick to pull the board out

Kudos man that saved me

[cold bloom]

yeah I struggled with mine a bunch

but it works eventually

lmao

[steel hemlock]

Appreciated big time

[cold bloom]

anytime brotha

[steel hemlock]

I'm getting the 60HE module later this week

[cold bloom]

W

[steel hemlock]

I say I'm but

[cold bloom]

I wish I had the module

[steel hemlock]

It'll be another build for a friend

[cold bloom]

my stabs are fine but still

wish I had it

[fluid ravine]

same xd

[steel hemlock]

Hehehe

[cold bloom]

maybe someday I'll get one as an update

have had this since it came out basically

[fluid ravine]

Yup same here

Just gotta find the opportunity

need to sell and buy

[cold bloom]

Yeah exactly

[fluid ravine]

yeah mines like 1 1/2 old already

[cold bloom]

and I've been happier buying other keeb shit in the meantime

[steel hemlock]

If ever you have a friend that wants a Wooting

Hook them up

[cold bloom]

I think when I have a nice mx build it'll be easier to sell and buy a module

[steel hemlock]

And then get what you want for yourself

That's what I did 😆

[cold bloom]

so I can give it up for a bit

[fluid ravine]

Got someone in this server that i want to sell it to, just dont know when or how im gonna take the chance with my parents on selling it and buying a module

[fluid ravine]

real

[steel hemlock]

Are you NA?

Canada by any chance?

[fluid ravine]

I like wanna fully build my Wooting to the extent, then like build another DZ60 MX build and gummy mount that one so i can swap between both Wooting pcb and MX pcb in the same case

[cold bloom]

I'm in Canada

lol

[fluid ravine]

I'm NA

[cold bloom]

salvation

[fluid ravine]

heh

Well don't wanna spend extra money on a case

so

[cold bloom]

fair lol

[steel hemlock]

If you're Canadian, Post Canada has a delivery with signature that require the payment to be done directly to the delivery driver by debit/credit and then postcanada fowards the payment to you

[fluid ravine]

might as well reuse the one i have been gifted with

[steel hemlock]

I think some states might have something similar

They take a small cut but

For things like these I feel can be worth

[cold bloom]

that's kinda dope, like they'd take payment for the whole keeb?

[steel hemlock]

When the 30 series scalping stuff was happening some guy sold me a 3070 PC that way and I had 0 issues

[cold bloom]

not just the delivery?

[steel hemlock]

Yeah

[cold bloom]

that's awesome

[steel hemlock]

I missed the delivery, they brought it to the post office

I paid like 1400$ for the PC and Delivery

[cold bloom]

that's actually really cool to know

[steel hemlock]

He got ~1350$ back?

[cold bloom]

decent

thanks for sharing man

[steel hemlock]

Yeah

It's very cool in Canada

[cold bloom]

I had no idea

I might use that in the future

cause paypal takes like what 9% anyway

[steel hemlock]

I wouldn't do it for things worth less than 200$ because then you start seeing a dent on the money you couldve made selling it locally

[cold bloom]

exactly

[steel hemlock]

But higher end custom keyboards, computers, etc.

Totally worth it

[cold bloom]

that sounds better than paypal fees tbh

for Canada

[steel hemlock]

Even with Paypal, I don't feel safe with anything that isn't friends and Family

[cold bloom]

agreed

[steel hemlock]

But try convincing someone to send friends and family that you don't know

[cold bloom]

I've had some bad experiences

not many

but enough

[steel hemlock]

Yeah

My CSGO trading days taught me the ways

[cold bloom]

LOL

[steel hemlock]

They taught me to not

[cold bloom]

my sneaker days did too

same shit

[steel hemlock]

sneakers you have to worry about fakes and trades too

Whole different art

[cold bloom]

yup

not fun

but I got some good deals over the years

I got a pair of turtle doves on a trade for a macbook LMAO

and got the soles repainted

[steel hemlock]

Niceee

My friends are really into sneakers so I know a bit

But I’m happy with my airforce ones

[steel hemlock]

Ok those are CLEAN

[cold bloom]

af1 slap

and right

I love them

[gilded hinge]

are there any good silent he switches yet

[cold bloom]

not really

mostly just lekkers/similar variants which are loud and jades which I find kinda clacky

[gilded hinge]

are there any at all

[cold bloom]

and similar recolours/variants

no real silents yet

no

[gilded hinge]

damn

[cold bloom]

maybe soon

it seems to be a growing market

but still early

[fluid ravine]

heh me with my silent board

not really

[cold bloom]

I mean there's no real silent switch yet tho

like modded to be silent

[fluid ravine]

yeah there isn't

[cold bloom]

easiest way to silence boards lately with he switches is just a fuck ton of foam and tape mod etc

load it up as much as you can lol

[gilded hinge]

ic

[fluid ravine]

nah no tape mod

I think mostly really on foam

thicker foam i say

Case foam i would use sound deadner like kilmat or silicone

[steel hemlock]

Dude I wanna take those to the gym

They’d elevate my fit

[fluid ravine]

pads i would go silicone to remove the mid tones to give it a more muted sound

[steel hemlock]

But they definitely are worth too much for me to comfortably wear to the gym

[fluid ravine]

Poron removes the high tone which could also help as well so i would try both silicone or poron but from my experience silicone cuts out the mid tones very well to make it muted like advertised and tested which makes it quiet

[steel hemlock]

Btw

Can you gummy mount on module?

With screw in stabs?

[fluid ravine]

Nop

Best results would be Clip ins and Plate mounts

Screwins are a guarantee no

even with the traditional gummy mount boards

o'ring doesnt work with screw ins

[cold bloom]

Cherry clip ins best stabs anyways

just gotta clip the bottoms

[fluid ravine]

yup yup

[cold bloom]

I noticed my stock plate mount stabs have similar bottoms to the stems too, I might try and clip them sometime and clean them and re-lube them etc

[steel hemlock]

Stabs seem to be the most pain in the ass thing to mod about a keyboard

[fluid ravine]

@steel hemlock Staebies and TX AP clip ins would have problems with the wooting PCB plate as the housing is too thick which the plate compresses it and making the stem stuck between it

[cold bloom]

yeah stabs can be a pain in the ass

[steel hemlock]

Oh wow

[cold bloom]

do you have dielectric grease?

[fluid ravine]

I might as well drill hole sin my pcb and make it PCB mounted compatible LOL

[steel hemlock]

I was looking at staebies

[cold bloom]

LOL I thought about that

[steel hemlock]

Good heads up

[fluid ravine]

haha dont

😂

[cold bloom]

LMAO

I would never

[fluid ravine]

imagine

[steel hemlock]

What about Durock stabs? Are they even worth touching

[fluid ravine]

LOL

[cold bloom]

Dom do you have dielectric grease

[fluid ravine]

Sure they're fine

[cold bloom]

for your stabs

[steel hemlock]

Somewhere in my dads garage definitely

That mf was bored just the other week and built a whole ass boat from scratch

I’d be surprised if he doesn’t

[cold bloom]

ok find that, and take your stab wires and dip the ends where it bends and clips into your stabs

like coat it good

past the bend

trust

[fluid ravine]

Durock stabs are fine, i'd say they're pretty average and iirc i dont think they have clip in stabs only plate mount and screw ins

correct my if im wrong anybody

[steel hemlock]

Oh I was talking about their plate mount stabs

[fluid ravine]

i mean they got they're v3's

idk if they're good

[steel hemlock]

I’m fine with my current keyboard but as I mentioned getting a module for a friend

[fluid ravine]

but the stem updates seems promising?

kinda?

idk

¯_(ツ)_/¯

[steel hemlock]

Idk if keep screw ins and burger mod mount instead of gummy or smth

[cold bloom]

try the dielectric grease on your spacebar dom

[steel hemlock]

Or upgrade stabs

[cold bloom]

let me know it if works

or helps

[steel hemlock]

Oh for myself I’ll definitely do that

[cold bloom]

yeah I wanna see how it improves it

[steel hemlock]

I’ll keep you updated

[cold bloom]

for mine it just makes it more consistent

if you do a good enough coat so it's covered all over the 2 ends just past the bends

it'll sound great

you almost want it to look like it's more than you'd think is good

[steel hemlock]

And holey mod right 😂

[cold bloom]

you want a lot

I didn't do that

but you can

[steel hemlock]

Is it even worth

[cold bloom]

it wasn't for me

[steel hemlock]

The bandaid and hole mods I see for stabs are just wild

[cold bloom]

I couldn't get it to stick cause I had too much lube already lmao

[steel hemlock]

So much effort for tiny changes

[cold bloom]

the one on the pcb might be more worth

idk tho

[fluid ravine]

You can lube and grease just fine

[cold bloom]

just the small squares under the stabs

if you have pcb mount

[fluid ravine]

You don't really need to do the extra mods

[cold bloom]

I would try the one under the mount points

myself

but otherwise nah

[fluid ravine]

Stabilizer pads?

[cold bloom]

yeah

[fluid ravine]

Ah

Those are preference

100%

[cold bloom]

I forget which "mod" that is

[fluid ravine]

Yeah same

xd

[cold bloom]

but some people cut up squares of band aids

and put it on the pcb where the stabs hit

[fluid ravine]

Wooting pretty smart with the imprint of the stem bottom out on the pcb

[steel hemlock]

So I’ll just do grease with mine, that sounds great.

Otherwise for a wooting module, would you replace the screw ins? I’d assume they’re pretty good stock but then your best mounting option is burger mod

[cold bloom]

wait what

I never noticed that

[fluid ravine]

LMAO

yeah when you take out your stabs and look on the pcb

there's like X squares where the stem hits

[cold bloom]

that's dope

[fluid ravine]

it makes it useful for people to know how big to cut the bandaid and where to place

[cold bloom]

that's why they sound decent lubed up

[fluid ravine]

without having to guess

[cold bloom]

even the plate mounts

[fluid ravine]

mhm

[cold bloom]

that's dope

[fluid ravine]

yup yup

[cold bloom]

oh wait you mean just the x lines in white?

or does it like depress there too

I thought you meant there was like a divot

[fluid ravine]

lemme take a pic

[fluid ravine]

ye ye

[steel hemlock]

Ok time to sleep for my boys goodnight ty again and I’ll keep you updated Dave

[fluid ravine]

xd

[steel hemlock]

GN

[fluid ravine]

Gn

[cold bloom]

GN boss

[cold bloom]

yeah I just checked that lmao

[fluid ravine]

lol

[cold bloom]

on the ones with pcb mount you can kinda tell by the 2 holes anyway

but the wooting pcb is so dope

[fluid ravine]

oh yeah thats for the pcb mounted

[cold bloom]

oh I didn't notice with the plate on

[fluid ravine]

lol

[neat spruce]

So everything was perfect until it was time to take the metal bar out of the stabilizer housings. There’s no explanation on how to remove it properly and I’m pretty sure I just broke the stem from removing the bar without explanation… can someone help explain how to remove metal bar from the end stabilizer housings? Just want to lube them and throw them back on 😕

[opal horizon]

how can i add an insert key to my wooting keyboard?

[tawdry tree]

the metal bar (stabilizer wire) is clipped into the housings. You can push it out (which can require a bit of force) and then it pops out.

[tawdry tree]

In Wootility under “Remap”

[opal horizon]

yes but idk how to add an insert to it

[tawdry tree]

Drag Insert

to the key you want it to be

[opal horizon]

drag insert from where????

[tawdry tree]

From the Remap tab

You don’t see Insert?

[opal horizon]

no

i just see this

nvm i got it

[tawdry tree]

Unlinked?

[opal horizon]

yea i figured it out

thanks

[tawdry tree]

Yeah, all good!

[valid lily]

guys what will be the best switches for wooting that sound and feel good

cuz the stock ones are really haevy and quite

[stone wharf]

anyone got any keycaps recommendations

[dark gyro]

Just got the 60 HE+ yesterday. Paired it with the GMK Mecha-01 I bought years ago. Might upgrade/mod further in the future.

[fluid ravine]

Alright modders
Thackson out

[visual sonnet]

looks good

i was planning on getting those

ended up with this

[dark gyro]

Thanks! That looks clean. What set are those?

[visual sonnet]

Akko Cool Gray

in Australia it was fairly hard to get

and i really like the subtle gradient and texture

sounds better too, compared to my wooting sub dyes

[dark gyro]

Awesome! Glad you're happy with them.

[stone wharf]

should i get these Lol

[paper bloom]

Ur choice

[stone wharf]

would u ?

[paper bloom]

Me? I wouldnt mind it

But id rather run anime girl shit for my build if u ask me

Including the optimum case

[stone wharf]

nah i’m using the wooting 60he board

so idk if the keycaps would go well with it

[paper bloom]

@stone wharf i meant the case

Like the tofu60

If u ask me if u wanna run gojo go ahead

[stone wharf]

oh

or i might get one of these

[paper bloom]

Optimum is a youtuber

His got a collab for cases

With wooting

And it shld b coming out this

After the 80he is kut

Out*

Or idk

[stone wharf]

which one looks better? @paper bloom

[stone wharf]

ohh

[paper bloom]

@stone wharf the one in black

If not

[paper bloom]

Run gojo

Or see the kapco

[stone wharf]

okay

[paper bloom]

There are some good stuff there

[stone wharf]

was gonna run this but it’s out of stock

[paper bloom]

@stone wharf

https://www.thekapco.com/collections/kapco-original?gad_source=1&gclid=EAIaIQobChMI9KOeqtajhwMVsKhmAh1UrQpCEAAYASAAEgLkivD_BwE

[stone wharf]

Yo

those are hella cool

[paper bloom]

https://www.thekapco.com/collections/kapco-original/products/exclusive-original-citypop-tokyo-keycaps-set

https://www.thekapco.com/collections/kapco-original/products/exclusive-original-summer-wave-keycaps-set

[paper bloom]

Im probs gonna get this with jades or lekker v2s and the optimum case

So first ima secure the case then the keycap

Then ima see for the switches since i will no longer need to do a burgee mount anymore for the optimum case

[stone wharf]

Ooh

wait when things go out of stock on amazon does it usuallly come back in stock?

[paper bloom]

@stone wharf not on amazon

[stone wharf]

oh

bro i want those batman keycaps

but i think there probably not gonna restock

[paper bloom]

I cld find u some when im back

[stone wharf]

alr

[small canyon]

What all do I need to do when I get my module and switches? Are they already lubed? Are stabilizers already in or will I need to do the electric grease and all that? Also do ppl still do the band aid mod? I did that on my current keyboard

[calm pulsar]

switches should be factory lubed, stabs are in and lubed with grease

[paper bloom]

@stone wharf cldnt find any

Sorry man

[small canyon]

Ok thank goodness. I went so hard on my current board, I just really don’t wanna do that again 😅

Gonna miss my tactile switches

[tidal frigate]

What case are you getting

[calm pulsar]

yeah im even thinking of building a non magnetic keyboard to experience tactiles again 😄

but wooting is still the go to for gaming

[small canyon]

I’ll keep mine, but i definitely won’t ever use it again

[small canyon]

Give me a HE switch that’s tactile. But put a note that actuation needs to be set to 1.0MM that way it doesn’t start till after the bump

[calm pulsar]

I think there are some gateron switches that have some tactile bump thingies that fit into the wooting switches
I personally think it kinda defeats the purpose of rapid trigger, but it can still be done

[small canyon]

True but it would still be nice to press down again if you don’t fully come off of it

[hard moon]

tbf, it's not entirely defeating the purpose. In combination with rappy snappy it might be quite nice

[calm pulsar]

well now that I think about with rappy snappy specifically it might be cool, but rappy snappy still works dynamically, not only at one level set by the tactile bump

wooting could make some tactile parts for the switch and sell as accessory

[visual sonnet]

miss

that gonna look bad after a while

[lunar willow]

I have some questions about wooting 60he. Will there be any problem with trigger accuracy or the accuracy of RT function when using magnet jade?

[tidal frigate]

Nope Just jades have 0.1-3.5mm where lekkers have 0.1-4mm

[feral gull]

4

[stone wharf]

maybe

[stone wharf]

which one

bro idk which to get

[small canyon]

Everyone here amazes me with just backlit keyboards. Idk how yall do it, I can type without looking and all that but I just love the shine through

I got these from Etsy

[stone wharf]

that’s a crazy rgb choice 😭

[tidal frigate]

Get one you like

[small canyon]

No I would never use that, that’s just in their pic. Mine will prob rotate. Or something. One of the reviews where someone posted after they got theirs I’ll show you

[tidal frigate]

Because we have muscle memory also without looking it is faster

[small canyon]

Yeah I don’t look either I just like that I have it. If that makes sense

In reviews someone that got these keycaps has a wooting so I was like heck yeah they’ll work for when I get mine

[stone wharf]

ur space bar is upside down

LMAOAO

[visual sonnet]

left

[cold bloom]

Once you go upside down spacebar there’s no going back

[visual sonnet]

why do people do it

[marsh saffron]

I used to do it a few years ago

But stopped

[polar girder]

Fax

[polar girder]

Oh snap

Guess not

But yeah I like it

Just more relaxed position for my thumb

Just personal preference type shit

[marsh saffron]

My thumb sits flush with it normally