🔧│keyboard_modding

[brazen sparrow]

What’s this 👀?

[tropic bear]

a mount for the UWU I'm making for my desk

still rough but this is the prototype

[little glen]

why keep the top part of the uwu case

[tropic bear]

I have the RGB

I wanna keep the band

[little glen]

ah

do you have it on hand?

then you can check what you need for the assembly

[tropic bear]

I have the CAD model but it's not 100% clear to me

[little glen]

yeah if you have the uwu, you can just open it up to see for yourself

[brazen sparrow]

That’s amazing!!!

[tropic bear]

thanks 😃

[tropic bear]

yeah I think I will just do that

I'm like 90% sure it's ok but I wanted to make sure before I spend 4 hours on a print that doesnt work lol

[brazen sparrow]

[little glen]

i mean, worst case you can just get a long screw and screw the whole thing in

[tropic bear]

worst case ya lol
I'm trying to use the same hardware and geometry as the bottom case so it's nice and clean

[restive gulch]

Who here uses the dash switches?

[harsh dove]

What’s your question?

[restive gulch]

I want to get a Tofu Redux for my wooting, but I am unsure of which switches to get and I am very unsure of how to make it sound good.

[harsh dove]

Well my first advice would be to take any switch/keyboard sound test videos with a grain of salt, simply because there’s a plethora of variables in sound test vs how it will sound at your setup, i.e. desk, desk pad, room acoustics, mic, etc

My next bit of advice would be to check out the #🪛│modding_faq , it has all the basics covered for you in terms of modding your board.

It’s all personal preference and depends on the sound you’re looking for.

If you have further questions, I’m happy to help

[restive gulch]

Which switches do you personally prefer for your wooting?

[harsh dove]

I like the reduced travel/long pole switches (even tho they’re not really long pole). Which would be anything like the Gateron Jades, Neo Lavenders, WS Dashes, Raw Raptor HE, and a few others

I’m currently using the Neo Lavenders and Jades which are the same as Dashes (jades)

[restive gulch]

Do you think the stock wooting steel plate is better then the poly plate that comes with the module sound wise? Reason I ask is because I have a 60HE with the steel plate.

[little glen]

steel is way louder

i think people like pc more

[harsh dove]

I personally like the PC plate but I don’t have a problem with the steel plate either

PC plate will reduce resonance vs steel plate

[restive gulch]

Do you happen to have a soundtest of your wooting?

[harsh dove]

In a tofu? Not that I recall

[harsh dove]

https://media.discordapp.net/attachments/984799440072220692/1214031205360599090/Tofu_Jades_CF.mp4?ex=6664656a&is=666313ea&hm=b70742572b994a477c20c813832956b3c0c362989dcfed354212fb34e25a6147&

I’m slow sorry

[somber roost]

great sound test and nice sounding board

[harsh dove]

https://media.discordapp.net/attachments/984799440072220692/1214345421640695832/2024-03-04_13-25-48.mp4?ex=6664388d&is=6662e70d&hm=241ea87a40c62fa145be0447fe5b34d40befc5141c7e67b0f5b8ba4a4de0ef3f&

Salvation x Jades

My frog mini sound test sucks so I’m not posting that

[restive gulch]

Actually doesn’t sound too bad

Did you lube them yourself?

[harsh dove]

Yeah

[restive gulch]

Which foams did you use? on the tofu

[harsh dove]

And I have a different config than that one now , that’s an older vid

[harsh dove]

Tofu foam, but now I use polyfill

[marsh saffron]

Do you have a vid with lavenders in a tofu by chance?

[harsh dove]

Nah :/

[marsh saffron]

Unfortunate, you said they sound fairly similar anyway though hey?

[harsh dove]

Yeah

Lavenders are a bit poppier

Slightly lower pitch

[restive gulch]

So you’d go jades over dash?

[harsh dove]

Jades and Dash are the same tbh

Just a stem recolor

[marsh saffron]

Lovely

[harsh dove]

Go for whatever’s cheaper

[marsh saffron]

That's exactly what I was waiting for

I like jades but they are higher pitched than id like

[restive gulch]

And was the the pc plate?

aka the module

[harsh dove]

Uh it shows at the end of the video lemme check

[harsh dove]

I’m pretty anti-foam now lol

[old swallow]

blasphemy

i will put foam in all my boards in protest now

[harsh dove]

Only board I have foam in right now is the tofu, but only plate foam with the gummy mount and then polyfill

I’d do silicone but don’t feel like cutting my silicone pad

[old swallow]

wait, why would you need to cut the silicone?

[harsh dove]

Silicone doesn’t work with gummy mount

[old swallow]

for the gummy?

[harsh dove]

Yeah

[old swallow]

ooh ok

[restive gulch]

The putty in space

[harsh dove]

lol yeah

[restive gulch]

All of that to make wooting sound decent is intimidating

[harsh dove]

I’ve removed that now tbh

That’s probably my most modded config

Now it has less mods

[old swallow]

oh yeah, but to continue this conversation kinda, i have foam in both my 60HE's , but even for other boards hearing sound tests i usually prefer with foams, even if people call them "foamy"

[harsh dove]

Yeah foam really only bothers me when I feel that I can hear it almost like compressing and decompressing

Idk maybe my ears are sensitive to it

[old swallow]

hmmmm, i guess. but idk, usually it just sounds more pleasant to me, but then again. with online sound tests its kinda hard to judge, and i think for the 60HE it sounds better

[harsh dove]

Yeah fair enough, it’s all preference. Even that tofu video of mine that I just sent sounds kinda foamy to me lol

[old swallow]

haha fairs yea, but its all preference yeah. thats why its always tricky when people ask: what are the best mods to do to my wooting?

[harsh dove]

Yeah exactly, there is no best

Just whatever’s best to you

[old swallow]

hey @harsh dove do you have the wooting 60% travel case?

if so, does the redux fit in it well?

or anyone else that has those **

[harsh dove]

Yeah I do and tbh I haven’t tried the tofu in there, I can when I get home

[old swallow]

yeah if you could, that would be nice. ive been considering getting 2 for my boards, but i want to know it fits well atleast.

i assume it does, but i want to be sure

[harsh dove]

Yeah I’d assume it does to but we’ll see

[old swallow]

if only they made them in multiple colours

would be nice if i could get different colours for my different boards

hey pssst, any wooting employees got prototype 60% cases with different colours, send them over haha

[cold bloom]

I took the switch pad foam out of my tofu (non redux tho) and I think it sounds great, I have the stupidfish tofu case foam under the pcb/plate but nothing between currently.

I am also using jades but have the l60 stems swapped into them cause I like a heavier key stroke

I think my next step is some long pole tx ap stabs cause I can notice my back space get a bit rattly when I press it on the corner, my spacebar seems fine otherwise tho

[old swallow]

if its ratly, you could try hitting it with some dielectric grease, cause i think that might help. (altought this is kinda noob modding advice from me)
But i think if the issue is in regards to the travel distance being different between switches and stabs, then i think it would be more wobbly to the feel, rather then sounding rattly.

i have jades, and default stabs feel good to me, altought maybe sound a bit rattly. so i might hit it with some grease to see if it helps

[cold bloom]

I just put some dielectric grease on it the other day, I can kind of feel the keycap move to the left on that one but not the spacebar

[old swallow]

hmmm, fair enough. i think wire balancing is an option, altough i actually have no clue how that works (never looked into it) but yeah, could also try some other stabs

[cold bloom]

I'd like to get some new stabs to be able to lube them a bit better this time and to tune them a bit more individually until they're all solid, I think I've reached my limit with these lol

[cold bloom]

yeah that's a good call, idk if I have anything flat enough but I'll try that before I get new ones

the other stabs mostly sound fine

[old swallow]

im kinda in the same boat, most of my stabs sound fine, but a few are a bit rattly. but the feel on mine feels fine to me

[cold bloom]

I noticed when I looked at the stab itself the right side seems to be a bit crooked when clipped in and with the gummy oring mount, idk what else could change that with pcb mount stabs so idk what to do lol

Like the o ring kind of pushes it in a touch, even with the foam pad between the pcb and plate

[gritty fiber]

Yo! Thought this would be a good place to check in. I have been thinking of getting the Wooting 2 He, but compared to the other keyboards in the selection it has a different case. It "open", instead of being covered around the sides of the switches. Do you know if there is a case for it to have the same design as the others? Because from what I have seen from the competitors it doesn't seem like they come close to the same quality of a board. 🤔

[fluid ravine]

There isn't any 3rd party case for the 2HE, you would sadly have to make a custom one.

[pure magnet]

Which mx stem dampening switch foam would you use?

My gmk hats are fucked due to the beer

Does someone offer then precut so I can just push them into the key cap

Like an oring

Kind of like the spacebar foam

[restive gulch]

Anyone have a link for Wooting POM plate?

[quiet bay]

https://smkeyboards.com/products/wooting-60he-plate?variant=43923321553143

this company makes them

idk if it has any issues with 60he+ tho

[restive gulch]

Is it ANSI or ISO

[lament grotto]

i need to make a critical decision T_T

do i lube the jades before popping them into my new 60he or.. just go for it T_T

[uneven cradle]

Try them out first

If you think they could benefit from some extra lube then you can always go back

[quiet bay]

They have both

[uneven cradle]

I think they're pretty nice stock I'm not gonna bother

[lament grotto]

yeah.. tbh this batch feels pretty solid

I just got my haul so its time to the ting.. the Wooting 😄

https://tenor.com/view/zhu-li-gif-27319109

[marsh saffron]

I hope the lavenders have good factory lube

Probably would end up just lubing them anyway though..

[lament grotto]

gotta retake my haul pic since my box of jades wasn't in it before T_T

i ordered a 72 pack off amazon, came in a legit gateron box. felt premium. when i ordered my hmx xinhais, i got them in a plastic bag T_T

felt like my drug dealer turned the wrong corner and came back with keyboard switches

There we go that’s a beauty shot

[cold bloom]

I fixed my backspace a bit by putting the plate foam back in, it's aight now

damn those black jades sold out quick eh

anyone here snag some?

[harsh dove]

https://tenor.com/view/maybe-alasdair-beckett-king-8-out-of-10-cats-does-countdown-8oo10c-perhaps-gif-3217791915938617000

[cold bloom]

I'll keep my eye out to see how you like them, I'll probably buy some when they're back in stock

[lament grotto]

same

Who the link for em?

[mossy thorn]

Black jades?

[cold bloom]

https://backspacetg.com/products/black-jade-switch

2 stage spring which could be interesting

[uneven cradle]

I just got some of these with a 2 stage spring

https://klc-playground.com/products/theca-x-rubrehose-linear-switch

[cold bloom]

how do you like the 2 stage springs? Does the force increase kinda linearly as you press further?

compared to just a static force?

[uneven cradle]

haven't arrived yet but from what i've heard they feel a bit more tactile and bounce back more quickly

[cold bloom]

very cool

[split dagger]

wish i had money i would love to build this

[cold bloom]

I'd love to build this if I had the cash

the toyota ae86 design is so dope

the boot up when you plug it in is so badass, I recommend watching alexotos' build of it on his youtube

[quiet bay]

Damn thats nice

The translucent keycaps go really well with the case

[cold bloom]

Yeah I hadn't seen that combo until I searched for the photos

this goes hard too

gmk redline I think

[lament grotto]

for those using the jades

silicone pad or poron pad? anyone have a leaning opinion on either with the pc plate?

[old swallow]

I tried both, prefered poron myself

Still have that in both my boards

[harsh dove]

Silicone Enjoyer myself

[cold bloom]

are you not using oring anymore?

or are you using it with your frog mini case?

[harsh dove]

Yeah frog mini

[cold bloom]

nice

I'd love to do that build someday

there's a guy in Toronto who does a custom plate that fits it and I'm super tempted

[harsh dove]

Hypekeyboards

[cold bloom]

yessir

that's the one I saw

[fluid ravine]

i use silicone

personal preference

i use to use no plate foam

[marsh saffron]

I use silicone with friction mount

[lament grotto]

i tried it with the silicone but i def want thock

and.. this is a rreally nice muted thock

[fluid ravine]

same^

[marsh saffron]

It was so worth cutting it to make it fit

[fluid ravine]

real lol

I need new keycaps D:

switches prob as well

[cold bloom]

where did you cut?

I kinda wanna try this at some point

[lament grotto]

i def will be looking for better keycaps. these were just some basic bitch ones off amazon. "Happy Balls" can't make it up

[fluid ravine]

i got pictures

gimme a few

[cold bloom]

awesome thank you

[lament grotto]

really love the shade of this blue alumaze. def gotta be on the hunt for a the right shade of keycaps

[marsh saffron]

Same

Getting lavenders and pbtfans BoW

[marsh saffron]

Yep did mine the exact same

I love how the silicone sounds

[fluid ravine]

i want lavenders and prob Drop DCX

i forgot what set

i think dolch?

[marsh saffron]

oh those look nice

my build is basically entirely gonna be BoW

white case with black pc plate and BoW keycaps is gonna look so good

[fluid ravine]

mines grey case

gonna need a gray keycaps

i like to match em

[marsh saffron]

This is what my build looks like currently

Just using wootings white keycaps

Wish I didn't buy these and just got pbtfans BoW but I didn't know about them at the time

[uneven cradle]

GMK lazurite would go hard

[lament grotto]

heall yeah!

[fluid ravine]

dont got a photo rn lol

[lament grotto]

if i find a set, im swipin that credit card so hard

[fluid ravine]

but yea^

[marsh saffron]

is that a tofu?

[fluid ravine]

gh60 tofu v1 clone

Pops gifted to me

[marsh saffron]

ah, i like that color a lot

[fluid ravine]

(Thockfather)

yaaaa

[marsh saffron]

what a guy

how many wooting builds has he done by now

[lament grotto]

yes

[fluid ravine]

yes

[marsh saffron]

sounds about right

[fluid ravine]

indeed

how many switches does CAM have?

yes

[median spade]

You should see my desk drawer and my box in closet for MX switches

[uneven cradle]

I'm worried what mines gonna look like in a year or two

[marsh saffron]

Hopefully I don't go off the deep end and it's just my lekkers that are off to the side

Probably will end up with a few different kinds eventually though...

[tropic bear]

Well the UWU model is great. Perfect fit. Stream Deck’s on the other hand….

[lament grotto]

i mean. great first shot though?

[little glen]

That looks decent apart from the stream deck not fitting at all 💀

[prime orbit]

Just gonna post this in here from the general chat. For modding I’m planning on getting the detachable wooting cable, a new case (probably just generic like the redux with brass insert), for switches I was told that performance is the same for all of them but the sounds are different (if there is one that’s the best for performance lmk), I’ll get a foam pad if the original 60he doesn’t come with one, and a plate (I’ve seen carbon fiber and one other one, not sure which one is better, also would like to know which one to get!) If there is anything else I should get please lmk. Thank you!!!

[marsh saffron]

Almost all of this is preference

[prime orbit]

That’s my worst nightmare 😭

I know basically nothing

[marsh saffron]

Switches don't affect the performance, for switches a lot of people go with gateron jades, geon raptors, or neo lavenders

I'm gonna be picking up some lavenders soon

Going with the redux is a good choice I'm very happy with mine

As for the plate, I just use wootings PC plate and don't have any experience with other plates

[prime orbit]

The wooting comes with a plate installed?

[marsh saffron]

It comes with a steel plate, I believe the module has a white PC plate pre installed though

[prime orbit]

Is the difference here just sound?

[marsh saffron]

You can get a black PC plate but you'd need to buy it separately if you want it (if you get the 60he module it comes in white)

[marsh saffron]

Sound and feel yes

[prime orbit]

Ok

And I’m getting the 60he stock

To start

[marsh saffron]

Prebuilt will have steel plate

[prime orbit]

And that’s perfectly fine?

[marsh saffron]

I recommend the black PC plate from wooting but again, haven't tried other plates

[marsh saffron]

I personally don't like it

[prime orbit]

The black one

Got it

[marsh saffron]

Ive got the black PC plate it looks great and sounds much better than the steel one

This is what my 60he looks like in a white tofu redux

The black PC plate adds a nice look contrast with the all white

And looks just as good if not better if you are going all black

[prime orbit]

Yeah I’ll probably be going all black

[marsh saffron]

Def recommend black PC plate

[prime orbit]

Then my keycaps will most likely be black with Japanese lettering in white

Or sum with that

Ok cool

[marsh saffron]

My next keycaps will be pbtfans BoW, they do have sets that are WoB as well but lack the japanese secondary lettering

https://kbdfans.com/products/pbtfans-doubleshot-wob

This is pbtfans WoB

[prime orbit]

I saw some that looked good lemme find them

Just saw this case

It’s compatible

Looks cool

[uneven cradle]

there's also black snail which is decently priced GMK https://novelkeys.com/collections/gmk/products/gmk-cyl-black-snail-keycaps

[marsh saffron]

Oh this is kbdfans new one isn't it?

[prime orbit]

Yeah

[marsh saffron]

Seen someone here talking about it

[prime orbit]

The Holy60 looks interesting too

Maybe too much for me tho

Simple is better

[uneven cradle]

sounds like poop don't get it

[marsh saffron]

Yeah this is all I've heard about it

[prime orbit]

Which one does?

[marsh saffron]

Interesting case with a cool design but impossible to not make it sound hollow

[marsh saffron]

Holy60

[prime orbit]

Ah ok

Yeah so it’s the redux for me then

Unless the new one is good

[uneven cradle]

turns out all those holes aren't so good for acoustics

[prime orbit]

But idk when that’s coming out

[marsh saffron]

I'm very happy with my redux

It was a tough choice between alumaze and redux, sad to have gotten rid of my custom strap but the tofu is worth it

[marsh saffron]

Yeah I remember someone saying the spacebar especially sounds terrible

[uneven cradle]

https://youtu.be/DSGwlzI5h5g?t=1232

[marsh saffron]

I don't mind the regular keys but god that spacebar

[prime orbit]

It says preorder but has 45 remaing

?

Does that mean it’ll ship soon or no. Very confused

[marsh saffron]

it likely will ship quick/just fine

the pre order probably means the next batch is on pre order but there are only a few remaining

[prime orbit]

Ah ok

These are what I was looking at

That price hurts my soul tho

[marsh saffron]

yeah gmk aint cheap

[prime orbit]

What’s the difference between them all?

Quality?

[marsh saffron]

gmk uses high quality abs

and has very high standards for their molds and legends

[prime orbit]

What is abs

[marsh saffron]

the type of plastic used

[prime orbit]

Ah ok

[marsh saffron]

the ones i linked are pbt

[prime orbit]

Are they considered the gold standard then?

[marsh saffron]

basically how the difference goes is like this ive been told

[prime orbit]

Is that why it’s much more

[marsh saffron]

cheap abs < cheap pbt < good pbt < good abs

thats what i was told, dont have any experience with abs

[marsh saffron]

its just overall a high quality and fairly made product

[prime orbit]

Well those have Been like the only white on black Japanese keycaps I can find so I’ll have to suck it up

[marsh saffron]

its a german (iirc) company that pays their employees fair wages with very high standards for their molding and legends. lots of sets/keycaps get tossed if they dont fit the tight standards

[marsh saffron]

im sure they wont disappoint

[prime orbit]

Bet

Also something I forgot to mention

With the redux case

I’m also getting the brass insert

Yeah here’s the other 2 plates

Not sure how they are vs the wooting one

But I’m sure the wooting one will be fine

[harsh dove]

Bro got OG Nixies in there somewhere

[harsh dove]

Sounds good with MX (to me) and terrible with HE

[marsh saffron]

Me neither I just went with the PC plate because it was easy and looked good

[harsh dove]

You won’t regret it, GMK is one of the best

[prime orbit]

Bet sounds good

[harsh dove]

I’ve used the carbon fiber one, they’re good, just need countersunk screw standoff kit as well, but the wooting pc plate is great too

Don’t need a kit for wooting plate

[prime orbit]

I’m all about not wasting money so I’ll do the keycaps and the wooting plate

Ty guys!

[prime orbit]

If you don’t mind could you look at my list and see if you have any recommendations?

I’ll @ you it

[prime orbit]

@harsh dove

This is gonna hurt my bank acc

😭😭

[harsh dove]

Seems good to me tbh, idk if you’ve also looked at Wootings Alumaze60 Case, and idk exactly what sound you’re looking for but seems solid. If you’re planning on buying a case and switches, just buy the Wooting60HE Module

[prime orbit]

I don’t like the look of the case. And I’m more of a performance over sound or feel kinda thing.

The module is back order I think

Lemme check

[harsh dove]

Says July

Pre Order basically

[prime orbit]

July ain’t that bad

I was just gonna get the base one

Then upgrade like one thing every month

[prime orbit]

I just added it all together

This will be a $520 keyboard

This better be worth every penny 😭😭

[harsh dove]

Yeah sounds about right if you’re getting a case, GMK keycaps, and switches , if you’re doing the prebuilt that’s also more

Vs the module

But would have to wait slightly longer

[prime orbit]

Ok changed it to the module only at its $475

Imma do that

July 27th estimated date is totally fine

Still better be worth every penny 😭😭

Aight final build here. Need anything else? @harsh dove

[paper bloom]

Just be aware to do a brass nut on the spacebar

@prime orbit

Once u get it

Then boom ur done

U can yse wooting or the foam provided in the case

I cant wait for the optimum case tho

[harsh dove]

Looks solid

[prime orbit]

Wait explain this again in simple terms

I need something else?

[prime orbit]

The YouTuber?

[harsh dove]

Yeah

Wooting x OptimumTech Collab

https://youtu.be/-Zzy5nLEz34?si=D606I4XU-qPDcNK3

[harsh dove]

No

You have everything you’ll need besides a lube kit

[prime orbit]

They come lubbed right?

[harsh dove]

Yeah

[prime orbit]

Ok cool

[harsh dove]

Just if you wanna handlube additionally, you’ll need a kit

[prime orbit]

What about the brass bar tho?

He said something about it

I didn’t understand it tho

[harsh dove]

He’s referring to the brass standoffs that come with the wooting for the spacebar

It’s not required tho

Just optional

[prime orbit]

Should I use them?

And the module comes with the foam right?

Oh wait the optimum tech looks dope

I’d get that if there was a release date 😭

[elfin garnet]

No you shouldn't

[prime orbit]

Ok cool

[elfin garnet]

Yes

[prime orbit]

Bet bet

[harsh dove]

I personally don't

[prime orbit]

aight bet

[old swallow]

Same, just the 2 screw left side and 2 screw right side.
That holds it in place just fine. And arguably makes the spacebar sound a bit better

[prime orbit]

Sounds good

[paper bloom]

Wait it isnt ?

I tried that for my space bar

There was any clearence

But yes the spacebar standoff

Is optional

[paper bloom]

Ye

[prime orbit]

Still no news on release date im assuming?

[paper bloom]

Yes

[terse quail]

Is there any mods I can do to the Wooting 2?

I want to install a different case on it but I can’t seem to find any

[paper bloom]

3d printed wooying 2he

Wooting*

Different custom plate

Burgermount

Tape mod

Stabilizer change

Switch changes

[paper bloom]

U gotta 3d print it on ur own

No 3rd party sells them

[terse quail]

Oh damn that sucks

[paper bloom]

Plates u can go to hypekeyboards and do a request

[terse quail]

Is there already stl files for different Wooting 2 cases or would I have to make my own?

[paper bloom]

Theres an STL file for the wooting 2 HE

[terse quail]

Okay thank god 😅

[paper bloom]

https://github.com/WootingKb/wooting-design

[paper bloom]

Not sure

If this is the one

But try ur luck

[terse quail]

Well I’ll have to do some research when I get home because I don’t really know what I’m looking for on their

There*

Should’ve gotten the 60 HE lol, didn’t realize it was so hard to mod full sized keyboards

[median spade]

Nah that’s one thing I never did because I got to try OG nixies and $10+/switch no thanks

[harsh dove]

Yeah fr lol I heard that too and was like F that

[old swallow]

oh hey @harsh dove, did you happen to try the Tofu redux in the carrying case?

[harsh dove]

I'll do it rn

[old swallow]

alright, ty

[old swallow]

oooh, so should be all fine

[harsh dove]

Yeah

[old swallow]

awesome, thank you

now to convince wooting to make me different coloured ones

[old swallow]

https://tenor.com/view/patrick-scheming-plan-gif-10212416

[harsh dove]

Haha right

[old swallow]

hey, how else am i supposed to keep my boards apart

haha

[brazen sparrow]

Morning everyone!!!!

[cold bloom]

I'm trying to decide what I should get for a new case for my wooting, I'm between either trying a salvation or a frog mini with the custom plate

anyone try a salvation here before?

Prob won't be ordering either anytime super soon just trying to decide haha

[median spade]

Yeah don’t do salvation imo

Wasn’t that good with 60he

[harsh dove]

@cold bloom

[cold bloom]

ty I like it, not sure which I'd go with but I'm leaning more towards the frog mini

[harsh dove]

Yeah Frog is nice, that's my main board rn for the HE

[cold bloom]

yeah solid choice, I think I'll grab one here soonish, probably get the plate in the mean time to get ready

there's only b stock silver cases left rn tho

[harsh dove]

What material plate are you getting?

[harsh dove]

Yeah unless you check mechmarket

[cold bloom]

I was gonna do POM or polycarb

[cold bloom]

ah fair

[harsh dove]

Yeah I have a POM and Alu plate for it

[floral vale]

So is KS20U the best switch?

Now that ppl got to try it

[fluid ravine]

"Best" is subjective, there's really no best switch nor stabilizers in terms of keyboards, same goes with foam, keycaps, plates, etc.
It's all about preference

[floral vale]

no

[lament grotto]

https://tenor.com/view/family-guy-crazy-stewie-griffin-gif-4247110

[floral vale]

I dont believe in preferences

[lament grotto]

i guess.. thats your preference

[harsh dove]

In that case, Lekkers are the best

[floral vale]

https://tenor.com/view/sleepy-sleepycat-sleepycar-cat-car-gif-314119685102089835

whats best gimme dem opinions & reasons

[lament grotto]

in b4 someone lists every switch being the best for something else

[fluid ravine]

I do you one better
MX Browns are the best

[lament grotto]

[floral vale]

Think about Gateron bottom line, or I will have to save 70$

[harsh dove]

I like Jades and Neo Lavenders

[fluid ravine]

Save it and give it to the next person

[floral vale]

bc of the lower AD?

[lament grotto]

I like the jades, I dont really have anything against the lekkers though. I just prefer the sound of the jades

[fluid ravine]

I like Jades and Neo Lavenders as well
If Geon RAW turns out to be good and how they feel and sound, then I'm down to put it on my list

[floral vale]

why do u like the jades over ks20? distance?

[cold bloom]

https://www.youtube.com/watch?v=79RcRFiSKm0

they sound pretty solid here

[fluid ravine]

yupp

[harsh dove]

Sounds and feel

[fluid ravine]

^

[cold bloom]

the bottom looks interesting

on the raw he

[brazen sparrow]

Is the RAW he confirmed compatible yet?

[floral vale]

Im limiting the distance to 2mm anyway with some hard O-ring s anyway so idc about that and dont care honestly abt the sound either

[harsh dove]

No but it most likely is

[fluid ravine]

@wary pollen You have any knowledge?

[floral vale]

So ks20 should be best for me if I want least wobble?

[cold bloom]

there are dual rail jades coming for the wooting supposedly

[harsh dove]

honestly the wobble is comparable to the jades or neo lavenders

[cold bloom]

they have the East polarity switches on the gateron site rn for boards with that polarity like the endgamegear I think?

[fluid ravine]

they do not need to do all that-

but im down

[cold bloom]

but supposedly there's a N polarity version coming

[fluid ravine]

wondering how it will turn out anyways lol

[cold bloom]

agreed

https://www.gateron.com/products/gateron-dual-rail-magnetic-jade-mini-e-switch?VariantsId=10812

[lament grotto]

those black jades seem super interesting

[cold bloom]

yeah I think black jades might be my next pickup

[fluid ravine]

Esp the springs

Im really interested in the springs

[cold bloom]

same

[fluid ravine]

dude black jades and black pc plate

[lament grotto]

so we're all agreed! Jades are the best!

[fluid ravine]

all black build? 👀

[lament grotto]

LOL

[fluid ravine]

LOL

[lament grotto]

in b4 someone starts playing Michael Jackson

[cold bloom]

https://tenor.com/view/michael-jackson-smooth-criminal-smooth-criminal-gif-thriller-glitter-m-jackson-gallery-gif-4400392586414863116

[floral vale]

good shit

[fluid ravine]

I feel like they could make the jades a bit better tbh
I feel like if they make the top out sound a bit more cleaner I'd put it as my #1 (not like if i had a #1 anyways)

[cold bloom]

agreed

[fluid ravine]

Lavenders and Jades are fighting for that spot on my list rn

haha

[cold bloom]

lavenders use a nylon top housing right?

[fluid ravine]

yep

[cold bloom]

I wonder how jades would sound with that top housing

[lament grotto]

kinda poppy

[cold bloom]

prob similar to lavenders stock haha

[brazen sparrow]

What’s the one that had the two step spring?

[fluid ravine]

Alright boys
Hypothesis

[cold bloom]

black jades

[brazen sparrow]

Black jades?

[cold bloom]

yeah

[brazen sparrow]

Yeah

[lament grotto]

yeah

[fluid ravine]

lol

[lament grotto]

https://tenor.com/view/spring-punch-gif-7332126

thats exactly how i want my switch to feel

[potent pawn]

whens the optimum case dropping

[polar girder]

Fk

[lament grotto]

they didn't have a date for it.

[polar girder]

It’s not nylon housing tho

Fk jades

[harsh dove]

I've tested this already and yeah its basically just turning a jade into a lavender

[cold bloom]

yeah makes sense I guess

[fluid ravine]

HmMmMmmMMm
Since I don't know the thickness and if its compatible with the jades or other HE switches, I think the top out sound on the Jades with the Nylon top housing of the lavenders should make it sound a bit more softer or lower pitched as PC is usually higher pitched for a switch material (i think, i cant remember shit)

[lament grotto]

buy black jades, buy lavenders. FRAKENSWITCH

[cold bloom]

I've frankenswitched all my switches lmao

[lament grotto]

https://tenor.com/view/frankenstein-its-alive-gif-10618052

[cold bloom]

had the raptors then put L45 springs/stems in them then put my L60 springs/stems in my jades

[fluid ravine]

waittttt CAM you should try to fraken switch the jades and lavenders :0

[cold bloom]

can never be satisfied I guess lmao

[fluid ravine]

pls

[lament grotto]

i think Your dad already did on livestream o.o

[harsh dove]

Dude I already did that lol

[fluid ravine]

oh fr?

on stream?

[harsh dove]

Yeah lol

[fluid ravine]

man i missed it :(

[cold bloom]

lmao

[lament grotto]

bruh is ages behind

[fluid ravine]

BOTH OF THEM

[lament grotto]

Go ask the OLD MAN

[harsh dove]

Yes

[lament grotto]

jk he not old pls dont kill me T_T forgive me thockfather for i have sinned

[polar girder]

Wait why lol

[lament grotto]

get best of all worlds.

[fluid ravine]

I wanted to play volleyball :(
But then i wanted to watch the stream :_(

[polar girder]

Lavender housing is nylon?

[lament grotto]

yes

[harsh dove]

It's basically like a Frankeswitched Raptor Lavender @fluid ravine

Cause it's tighter too

[polar girder]

All stems are POM

[harsh dove]

and I hate it

[fluid ravine]

Nah he's old and wise in my eyes
:) thats why i love him sm hehe

[polar girder]

I have raptors with l45 stem/springs right now

[fluid ravine]

o

kk good to know

[polar girder]

Lavenders aren’t black. Missing the point lol

[fluid ravine]

Colors

[harsh dove]

Yeah so you can basically make Raptor Hybrids but with Jades and Lavenders

[cold bloom]

why are all the stems POM?

cause of the magnets?

[harsh dove]

if you want the tighter stem

[polar girder]

Need oil king HE

[fluid ravine]

FRRRRRRRRRRRRRRR

DUDE $100+

IDC I TAKE IT

[polar girder]

Need

[fluid ravine]

dead ah

[lament grotto]

Imagine a Tactile HE!? LOL

[fluid ravine]

i do anything for oil he

[fluid ravine]

heh

[polar girder]

Fr fr

Legit anything

[lament grotto]

Boba HE lol

[polar girder]

I’m good on tactile switches

[brazen sparrow]

@harsh dove you get around to testing the new durock stabs?

[fluid ravine]

soon

[harsh dove]

Nah

[fluid ravine]

or not 👀

[lament grotto]

more like unholy panda lol

[fluid ravine]

no v3?

[fluid ravine]

unholy lol

[brazen sparrow]

Doesn’t the two step switch have a tactile feel?

[polar girder]

I might put the stock PCB in the redux and sell it for $250 with PC plate accessory

Good deal yeah?

Then keep my module in stock plastic case and buy frog mini

[lament grotto]

noo the 2 stage spring makes it much snappier feeling

[fluid ravine]

sry maf aint maffing big bro

[lament grotto]

much better bounce back response

[lament grotto]

I'll see you in court., thats my line!

[fluid ravine]

The design of the two-stage spring makes it longer than a normal “one-stage” spring. This means that the spring is compressed more than a one-stage spring during the unactivated state, and it reaches its bottom out weight more quickly. This makes the downpress feel more firm and consistent, as there is a smaller range of forces between the beginning of the keypress until bottom out or even actuation. In addition, the upstroke after lifting your finger is noticeably faster, meaning that there is the ability to rapidly repeat keystrokes in a shorter amount of time. Two-stage springs are also less likely to have spring ping because being more compressed even in the unactivated state means that there is less room for the spring to move/rotate around. -CAM

[polar girder]

Sell Wooting 60HE in tofu redux with brass weight for $250

Might have to add shipping

[fluid ravine]

im kidding
yeesss

[brazen sparrow]

Interesting!

[polar girder]

Then friction mount module in stock plastic case

[harsh dove]

Sounds like a solid plan to me

[fluid ravine]

add the screws lol

[polar girder]

Until guy frog mini with nylon plate

I’ll tray mount the redux for sale

[fluid ravine]

troll the customer

[harsh dove]

Bigsly wants all black all nylon all silent he board

[fluid ravine]

frfr

[harsh dove]

I know this mans

[polar girder]

YES

[fluid ravine]

we all do\

[harsh dove]

lmao

[polar girder]

💕

I feel seen.

[fluid ravine]

[polar girder]

[fluid ravine]

looking at you rn

[polar girder]

[harsh dove]

https://tenor.com/view/the-office-steve-carrell-michael-scott-peeking-spying-gif-8222622

[fluid ravine]

reading you like a book

[polar girder]

Oh god haha

Ok that’s enough

Just gimme silent he now

[fluid ravine]

https://tenor.com/view/i-can-read-you-like-a-book-gill-engvid-i-know-what-you're-thinking-learn-english-with-gill-gif-17226131047863255272

[polar girder]

[fluid ravine]

nah we wait for Oil King HE

it finna be black black

[harsh dove]

Yeah whenever gateron decides to do that "special in-house blend material"

for HE

[fluid ravine]

never

or maybe 👀

[polar girder]

Tom said he has grey for nylon plate rn

Have to see if it’s dark enough

[fluid ravine]

da flip

[harsh dove]

If its like a space gray that could be nice

[polar girder]

Yeah bro then if I could do that I would be set

Frick

Idk if they’re still doing that grey tho

If they ever open up to orders again lol

[fluid ravine]

Clear (Almost clear) PC plate

[polar girder]

I don’t like PC plate honestly

Too soft

[fluid ravine]

fk

i was gonna say smth

[polar girder]

[fluid ravine]

but i forgor how to spell alexotos

anyways, i saw some almost clear pc plate on one of his tofu60 v1 build stream

[polar girder]

Need that for cam XRAY build

[fluid ravine]

it was kewl

[polar girder]

I gotta rebuild my pc (swap CPU and GPU) then swap out 60HE cases then

Then sell some shit

[fluid ravine]

It was a build where he made the tray mount bouncy
I tried it, it was sick

[harsh dove]

wwhat you swapping too?

[fluid ravine]

stabs was hollow but it was frigin fun

[polar girder]

Long story ngl

[harsh dove]

oh damn

[fluid ravine]

pc parts problem lel

[polar girder]

But for now going from 14900k/6900xt to a 13700k/4080

[fluid ravine]

wait-

YOU STILL HAVENT BUILD IT

[polar girder]

I’m trouble shooting as I go

It’s running lol

Chill

[fluid ravine]

ITS BEEN MONTHS D:

[harsh dove]

Ah okay nice

[polar girder]

The GPU isn’t my problem

[fluid ravine]

o

the whole pc is the problem

https://tenor.com/view/ron-swanson-throw-out-computer-get-rid-of-computer-trash-dumpster-gif-13481995905193221419

[polar girder]

I was having intermittent black screens and I’ve nailed it down to either cpu, motherboard, or ram

Not cooling, not power supply, not GPU and I’m pretty sure not SSD

So if it black screens on new build then it’s CPU broken

If not, then I can sell cpu for $300

And then test motherboard and ram

[fluid ravine]

Saw some MSI PC at costco with a 14900F with a LONG AH 4070 with 2tb ssd selling for $1600/1700

[polar girder]

Weird pairing

[fluid ravine]

fr

i wish i could show the pic but my phone isnt working for some damn reason

found it

bro i swear when i saw the gpu is was not big but long 😭

bro even some of the gpus in prebuilt pc in best buy were so fking weird

[harsh dove]

Gpu cable?

[sweet oak]

Elongated gpu

[fluid ravine]

[polar girder]

Naw cuz I swapped out PSU and cables too and same issue

[harsh dove]

What cables you running? OEM?

[polar girder]

Current setup is not blackscreening

[harsh dove]

and was it doing this with the 6900XT?

[polar girder]

So I’m good. I just need to figure ours what’s broken

No

It’s 14900k/6900xt ddr5 right now and working fine

It’s not GPU

[harsh dove]

It was black screening with 4080 tho?

[polar girder]

No

4080 is new

[harsh dove]

Oh okay

Then nvm

I was gonna say cause I had this issue before

and it was the cable

[polar girder]

It was blackscreening on 13700k/6900xt/ddr4 only

[harsh dove]

ah okay

then yeah nvm

[polar girder]

And it’s not 6900xt problem since current setup is fine

[harsh dove]

yeah

[polar girder]

Yeah I saw 6900xt have some issues for some

Mine is asus rog stric liquid cooled and runs well tho

[harsh dove]

oh for me it was the 12vhpwr cable for nvidia cards

giving me black screens

[polar girder]

Sometimes drivers aren’t perfect but I just don’t update unless I have to for new game or something

Oh damn

Curious

[harsh dove]

its been resolved now but yeah

[polar girder]

Yeah I was thinking to get new PSU to have native atx3.0 cable support

[harsh dove]

Yeah I haven't bothered to do that yet

just have Corsair RM1000x rn

[polar girder]

Yeah I have EVGA 1000w P6

Pretty solid except not white and not native 12vhpwr cable

[harsh dove]

Nice, yeah I haven't had any issues with mine

I got a custom PSU to GPU 12vhpwr cable for it

instead of that octopus oem cable lol

[sweet oak]

Hate that cable

[harsh dove]

Yeah there's no way I was rockin that

[cold bloom]

I've been using this cable with my RM1000x for a while now and it's great https://www.corsair.com/ca/en/p/pc-components-accessories/cp-8920332/premium-individually-sleeved-12-4pin-pcie-gen-5-12vhpwr-600w-cable-type-4-white-cp-8920332

for my 4080

[sweet oak]

Same, but in black

[harsh dove]

Yeah corsair made their own as well, I used it for a bit before I got my custom when I had the black screen issues

It was good

yeah I got the black version

[cold bloom]

I wish I got the white/black cause I got custom cables that are white/black sleeved but oh well lol

[harsh dove]

Lol yeah mine are black/silver

[cold bloom]

I’d like to get an aio with black sleeves but just haven’t gotten around to it cause it’s not a priority really

[sweet oak]

Charmander

[cold bloom]

I want that new ekwb aio tho

[harsh dove]

Nice build man

[cold bloom]

ty

[harsh dove]

I love the aero cards

Best white card besides strix

[sweet oak]

They’re pretty

[cold bloom]

me too, I feel like I get a bit of colour instead of just plain white

but no red/blue like the strix

[harsh dove]

well the white strix is chrome

only black is redblue

[cold bloom]

oh right I forgot about that

good point lol

[harsh dove]

yeah I wish they did chrome on the black one

sadge

[cold bloom]

but I like the frosted blue accent

[harsh dove]

yeah its nice

[sweet oak]

[harsh dove]

doesn't matter too much for me cause mines horizontal anyway

not vertical

[fluid ravine]

WRONG GUY

[fluid ravine]

DAMN ITS FAT

[sweet oak]

[cold bloom]

LMAO

[honest sapphire]

anyone knolw the thickness of the wooting pcb

[cold bloom]

1.6mm

[honest sapphire]

thanks

thinking about getting TX AP Stabilizers

[lament grotto]

Has anyone seen the WS Pearls!? Ball bearings in a switch!

[sweet oak]

So i can throw them even better

[lament grotto]

and if you have a dog, they can go fetch!

[sweet oak]

Okay boy! Go get it-

[lament grotto]

[cold bloom]

I saw the milktooth video about these last night

kinda interesting tbh

[honest sapphire]

anyone have acrylic tofu redux?

[civic sentinel]

just got one last week

looks and sounds really good

[cedar gate]

For a plastic case?

[honest sapphire]

how is the rgb?

[polar girder]

Yo does frog mini come with 60HE compatible plate foam or silicone pad? @harsh dove

[harsh dove]

Nah just use the wooting foam/silicone

[polar girder]

Ok ty

[civic sentinel]

just in general

got the pc plate added foam and ws jade switches tho so i cant comment on the improvement the case would make alone

[civic sentinel]

rgb looks good too

im not a huge rgb enjoyer but it looks good imo

[polar girder]

Yo if anyone in here wants to buy a 60HE in a black redux that comes with a PC plate I’ll give free shipping to anyone in this discord interested. $250 shipped.

https://imgur.com/a/gKXxCid

With brass weight obviously. Not trying to make a trade post just wanted to offer a deal to the community. Just private message me if interested. USA shipped UPS and PayPal for payment.

[sweet oak]

[pure magnet]

Looks like da Dude has WS2 accent keys with his GMK WoB? Never seen such as set

Wish I could just buy single keys for accent like that simple coloration

[prime orbit]

What switches?

[polar girder]

L60

Steel plate installed. Comes with PC plate

[cedar gate]

While I know gmk shines super fast I can't deny gmk looks awesome

The color and legends are so nice

[harsh dove]

https://tenor.com/view/nodding-crossed-arms-pikachu-eyes-closed-pokemon-gif-15194868

Embrace the shine

feels better over time

[cedar gate]

Honestly after seeing it maybe I was too quick to judge but I'm just more of a matte guy

Ngl this would bug tf out of me

[paper bloom]

It isnt that bad

[paper bloom]

Wait till you buy ceramic keycaps and have it break on you

[quiet bay]

I don't think they're that fragile

it's made of alumina ceramic so it should be pretty durable

[paper bloom]

O if it is then it shldnt that bad yea

[sharp vigil]

eww

[uneven cradle]

It ain't that bad I've had mine for 2 years but I guess your mileage may vary depending on how greasy your fingers are

[sharp vigil]

I'm sure it's not the worst it could be but it still looks ugly

[paper bloom]

Na so long as you wipe your board down

Every once a week with wet wipes

[uneven cradle]

Looks aight to me

[paper bloom]

I dont see a issue

Ive been running the stock keycaps for my 2HE for sometime its a bit worn

[sharp vigil]

That looks ok

[sharp vigil]

This doesn't

[uneven cradle]

Happens with PBT too especially cheap PBT

[uneven cradle]

just put my jades in feeling and sounding nice, still on steel plate though still waiting on the PC plate to arrive and my new stabs

[visual sonnet]

this came with my tofu 60 case (not redux or 2.0, the old one). Idk what they are

pls help

if you guys have a tutorial on youtube or something, that would be great too

im assuming the black circles are for the feet, but idk what the clear thing is/what to do with them

[agile drift]

guys does anyone know if the wooting60he+ module is compatible with the tofu acrylic case ?
and can i use a pcb that has underglow with it or will i be loosing all the features of the wooting e.g rapid trigger etc. (going to be my first custom keyb so dont judge plz)

[visual sonnet]

yes to both

you can use the pcb and case

[agile drift]

do you have any pcb reccomendations that have an underglow?

this is my goal^

[visual sonnet]

its my first time building a keyboard

i know the theory, not the practical

[agile drift]

ohh

no worries thank youu

[cold bloom]

black are the feet for the bottom of the case, the screws are to screw your module into the case if you choose to go that route, and the clear rubber parts are to put over the standoffs inside the case so the screws don't go metal to metal

[visual sonnet]

wdym by “choose to go that route”? is there an alternative?

[cold bloom]

you can friction mount it with an oring

[visual sonnet]

also as for the rubber parts, is it the same as a burger mount?

[cold bloom]

but you don't have one rn by the looks o fit

[visual sonnet]

that sounds awful, would rather screw it

[cold bloom]

burger mount would be using the black screws you have in that photo but a small oring around each screw above and below the pcb

friction mount is easier cause you can remove it put it back in pretty quick

but both valid

[uneven cradle]

prior to what the other guy said you need the wooting PCB that's the main thing you're buying with the module

[visual sonnet]

nah, im not gonna be changing it so i think its better to screw it in

could you elaborate on the clear rubber parts more pls?

[visual sonnet]

i thought he meant plate, whoops

[cold bloom]

fair, friction mount can isolate it a bit better from the case but they both work if you screw the screws in lightly with burger mount

and the clear rubber parts basically cover the metal stand offs that are poking out of the inside of the case

so it basically works as the bottom part of a burger mount

[visual sonnet]

i cant burger mount, so that may be later down the line. I was told not to screw it in that hard, except for the usb port for my case specifically

[visual sonnet]

ohh i see. So i would have to place them over the standoffs?

[cold bloom]

yeah exactly, in ur case Id use the clear rubber pieces then atleast so the screw doesnt go right into metal

and yes

exactly

[visual sonnet]

okay sweet, thank you

[cold bloom]

no problem

[visual sonnet]

i will most likely stream myself building it in vc

so i dont get lost or do something wrong

[cold bloom]

are you just swapping cases or anything else?

[agile drift]

oh, so if i do change the pcbs i loose all the features

[visual sonnet]

just swapping cases and keycaps, thats all for now

later down the line i will disassemble it for the burger mount and perhaps lube it

[harsh dove]

#🪛│modding_faq

Please refer to this^ for a lot of references and questions

[visual sonnet]

okie dokes

i dont think my question could of been answered there

[harsh dove]

No worries, just plenty of good info there

[cold bloom]

kk shouldn't be too bad, unscrew the module from the old case, put the clear rubber covers over the standoffs, screw the module into the new case and keycaps on

good to go

[visual sonnet]

might have to watch a youtube video on it though. My case is finicky

should’ve gotten a redux, but it was a steal

[cold bloom]

the tofu? I have one rn

the non redux one

[visual sonnet]

original or 2.0?

[harsh dove]

Yeah you shouldn't have any issues

[cold bloom]

just put the module into the case closer to the left side, screw the top left in and make sure it lines up

then do the rest lightly

I have the original

[harsh dove]

just make sure to line up the USB Port before screwing it down completely

[cold bloom]

^^

[visual sonnet]

yeah, i know you have to screw in the left corner more than the rest because of the port

[harsh dove]

yup yup

[cold bloom]

just do the left corner first and line it up a bit

then do the rest to the point they just kinda screw in lightly not fully

[visual sonnet]

also with the foam inside, i can’t just plop it down right? i think you have to cut off some parts

[cold bloom]

should be okay

[harsh dove]

Yeah just put it in

don't gotta cut anything

[cold bloom]

some people flip it or take off a layer but it's fine the way it is

[visual sonnet]

i saw a youtube video and some guy had to cut it down a bit. I can send a link to it and a time stamp

[cold bloom]

maybe he took off one of the layers?

I had used it just the way it came out before and you maybe gotta press down to get the first screw in but it should be fine

[visual sonnet]

https://youtu.be/igy_n3f7VeI?si=KpkMDMbWFgyB9DFi

6:54

[cold bloom]

I think that's cause he flipped it?

you can cut a bit for the usb like he did if you want

doesn't hurt

[harsh dove]

It doesn't use that foam anymore

[cold bloom]

You can see where he flipped it

[harsh dove]

It's already cut

[cold bloom]

theres a cutout already

yeah

he just flipped it over

[harsh dove]

and the lower standoff is optional

not required

[cold bloom]

I was just gonna say that

[visual sonnet]

on the newer ones? i ordered mine last week

[harsh dove]

Yeah

[cold bloom]

the one by the spacebar often messes up the sound

[harsh dove]

It doesn't look like that anymore

it's thinner too

[cold bloom]

if you just do the 4 corners that should be enough

[visual sonnet]

okay let me write this down

shut

shit

[cold bloom]

lmao

don't cut any foam

screw in just 4 corners

and line up top left first

with usb port

[harsh dove]

Yeah

[cold bloom]

and put rubber clear covers over standoffs

[visual sonnet]

• dont need to cut any foam
• screw only 4 corners, dont have to do centre or anything else
• line up top left first with usb port
• screw lightly so they just screw in, but screw the left one enough so it lines up the port to hole
• put rubber clear cover over all the standoffs, and if it doesnt work just skip it

[cold bloom]

they may not fit the 2 side ones but you can check

[cold bloom]

perf

[visual sonnet]

why not?

[cold bloom]

the side ones in the original case are kind of blended into the case

and the covers are circles

so they don't really fit on

they fit the 2 top ones and the spacebar one

[visual sonnet]

ill just put it on all the standoffs and then see which one fits and doesnt

[cold bloom]

yeah exactly

do the 2 without light so they just screw in and you should be fine

I can send you the orings for burger mount if you wanna do that down the road

that obviously will work on the side standoffs too

I think badseed tech shows how to do it

[harsh dove]

Tofu foam on top
Wooting foam on bottom

[cold bloom]

and links them

[visual sonnet]

tofu one look eh

[visual sonnet]

he does

[harsh dove]

It has cutouts for all the screws and usb port

[visual sonnet]

and i have a link for it already, ty tho

[cold bloom]

https://stupidfish.design/en-ca/collections/keyboard-foams/products/tofu60-dz60rgb-ansi-v2-case-and-plate-foam-set

I use this one

it's aight

I wanna get a new case eventually

[visual sonnet]

ohh i see

i may not buy one tho so

no point if it works fine

[cold bloom]

yeah you def don't need to

[visual sonnet]

i wish i could get weights for it to make it heavier

[cold bloom]

you could always sell it sometime and get a redux or something

but it's a decent case as is

the stupidfish foam I linked is nice cause it has foam for the battery well too so insulates it well

[visual sonnet]

it was a gift from my girlfriend, i will not be selling it

[cold bloom]

fair lol

[visual sonnet]

ohhh thats pretty good actually

[cold bloom]

another thing I found that helps is to plug the hole on the bottom left of the case idk why it's there

but I put some foam I cut into small pieces in it and taped it lmao

it helps the board sound a bit more consistent from left to right

[visual sonnet]

wait where

[cold bloom]

on the bottom left of the case like under where wasd would be

there's like a square hole