🔧│keyboard_modding

[median spade]

yes

Issue is keycaps with jades not stabs

@grizzled edge

[dapper kernel]

Ok i bought one cant wait, even my balaced stabs always has rattle sound and i hate it 💀

[dapper kernel]

Yeah i use gmk should be safe

But spacebar might be wrapped idk

[harsh dove]

Yeah its usually keycaps with looser stem tolerances

[grizzled edge]

ahhh I see. thanks for the insight. Do all 3 conduct light from the backlighting equally as good? I've seen keyboards that have legends with unequal light shining through, pretty awful result (came across a review of the awful new logitech gaming 60% keyboard has precisely this issue)

[tawdry tree]

The Dye-Sub isn’t shine through. Doubshot PBT and Etched ABS are great for RGB.

[glossy pagoda]

The dye sub keycaps are not shine through

[grizzled edge]

oh yeah makes sense since it's essentially printing on a opaque material

[glossy pagoda]

For the shinethrough on ABS and PBT, that depends more on the LED placement on the keyboard and if that aligns with the characters or not

[grizzled edge]

and I would suppose also on how the light emitted from the led is "guided" to the shinethrough portion of the keycap

I suppose how the switch beneath is built will also impact how the backlight is guided to the keycap

is the light beneath the switch or switching on the switch itself?

[glossy pagoda]

LED is on the PCBA

[tawdry tree]

It’s about if your LEDs are north or south facing. South facing LEDs don’t light up legends as brightly as north facing LEDs do.

All Woot’s boards are north facing LEDs.

[grizzled edge]

thanks !

[grizzled edge]

had no idea there was these 2 configurations. Upon reading on it (https://keyboardable.com/north-facing-switches-vs-south-facing-switches/), I understand north-facing doesn't work well with cherry caps though. is that a concern with woot's keyboards?

[tawdry tree]

That isn’t a common issue anymore. Maybe with very specific keycap sets it’s still a thing but not at all with any keycaps Woot sells.

[median spade]

Yeah really only some switches on the mx side really

like the one true switch MX blacks

[leaden pawn]

specifically with module?

[tawdry tree]

Oh yeah it was the switches that caused it.

[polar girder]

Need south facing led’s

North facing straight garbage

Side print legends, come on folks

[grizzled edge]

@polar girder you're saying litterally the opposite to what I've been told here xD

[tribal tundra]

can a normal switch opener open he switches??

[polar girder]

Yes

[polar girder]

Yeah cuz I use side print legends so north facing led’s suck for me

[grizzled edge]

because the light of the led, being stuck north of the switch, can't possibility reach the shinethrough of the legend south side of the key?

(i'm learning, apologies for my stupid questions)

but if it's print anyway, is it even shinethrough?

[tribal tundra]

goood

[polar girder]

Yeah some gets through

But it’s lame not that bright

Side shine through I guess

[harsh dove]

Yeah, the top housing, which have now been rounded off to prevent this issue

[harsh dove]

Yeah works with module or regular 60he

[tribal tundra]

wooting 80he comes with tape and foam mode right?

[harsh dove]

Comes with tape mod and silicone gasket mount

[tribal tundra]

ok

what about foam

i thought it came with foam

[harsh dove]

All of this is on the website

[tribal tundra]

ok

[harsh dove]

What you see is what you get

[tawdry tree]

Exactly! Also, south facing LEDs (because you’re looking at your keyboard from the front) look a lot better with non-shinethrough keycaps.

[tribal tundra]

thx

ooh

it comes with tape and foam

[grizzled edge]

Hmmm, not sure I understand why though. By "shinethrough" do you mean completely transparent material keycaps, or opaque one with a shinethrough legend?

[tribal tundra]

then imma just do a switch pad mod probably

it makes it more thocky right?

[tawdry tree]

The backlight, the light you see below all keycaps is brighter with south facing LEDs as they shine out from in front of the switch.

[tribal tundra]

wait

do any switch pads fit?

[tawdry tree]

Yeah, most if not all switch pads fit. Just check if they have an LED cutout.

I don’t think it’s gonna be a big difference for the 80HE tbh

[grizzled edge]

ah I see, so north for shinethrough on topfacing legends, south for shinethrough on side legends (with a tradeoff of less shinethrough on the topfacing legend)

[tawdry tree]

and south facing LEDs for non-shine through/opaque keycaps, yes.

[grizzled edge]

ah yes, if you want to have LED bleed around the keys (I hate that) 😄

[fluid ravine]

PET film tape..

[tawdry tree]

Just a backlight, shine through keycaps have that too.

[grizzled edge]

I'm surprised no one figured out a way to remove light bleed

with optic fibers for instance

[tawdry tree]

Many like a backlight actually

[tawdry tree]

Could maybe work but the keycap moves up and down of course, it’d be possible but difficult I’d imagine.

[elfin garnet]

long pole or normal ones?

[grizzled edge]

had no idea!

[polar wasp]

Sent an email out, fingers crossed. Thank you!

[harsh dove]

I'm using normal one, but I also bought a pair of long poles too

[tribal tundra]

will these fit the 80he?

[tawdry tree]

Seems like it, yeah.

If the thickness is 0.3mm it’ll fit fine.

0.3mm or less.

[old swallow]

idk if i am wrong here, but arent these supposed to go on the PCB under the switches? cause thats what it looks like to me from the holes. and the bottom of HE switches is very different from 3/5 pin switches

[tawdry tree]

Yes, they go in between the PCB and switch. These are for 5-pin switches but they work fine for 2-pin switches as well.

[old swallow]

really? i tought the HE pins were much thiccer?

[tawdry tree]

I don’t think you can find them in a 2-pin + LED cutout yet. Maybe 3-pin originally for optical switches.

[fluid ravine]

They're switch pads so yeah

[tawdry tree]

No, mounting pins are thicker but they’re in the same location as on regular switches.

[old swallow]

ooh ok, fair enough

[tawdry tree]

👍

[fluid ravine]

0.5mm and beloew works fine actually @tawdry tree
I use to have them in my board (Took it out after 6 motnsh, regretted it, ima buy another set another time)

[tawdry tree]

That pushed on the plate a little right? Thought the gap between the switch and PCB was like 0.2mm

[supple field]

this is my wooting60

wooden DH60 case
gmk olivia clones
raptor switches with lekker stems
tape modded and tuned
spacebar foam

[polar girder]

Goes thock or what

👁️👄👁️

[supple field]

it's really hard to get a wooting to thock because of how the magnets work but the spacebar is very thocky. However there is a very deep clack for every other switch and it has a very tight stem, it feels really good with a nice bumpy spring and an overall really good feeling

it's worth buying raptors and taking time to make the frankenswitch

because after using the lekker switches i hate wobble

[tawdry tree]

Not so much to do with the magnets in a switch’s stem but more so to do with the lack of switch choices.

[pastel fulcrum]

Na the black

[little glen]

black zinc case?

https://oblotzky.industries/products/gmk-cyl-mictlan ive been looking at these caps myself

or maybe gmk dots

[little glen]

you could also get some cerakeys if you'd be interested in that

i do also like white/beige with a black case but that might just be me

[median spade]

Beige with silver only

[polar girder]

Those are sick

[little glen]

yep

[tribal tundra]

K thx@

[tribal tundra]

It doesn’t say

Should be though

[tribal tundra]

can switch pads go on the 80he?

[uneven cradle]

well they use the same switches so I'm going to guess yes

[tribal tundra]

ok

[boreal fog]

have a parcel shipped from wooting, via fedex - and its experiencing a Clearance delay - Import
"Shipment requires a Commercial Invoice."

What do?

[fluid ravine]

Yes switch pads do indeed work with the 80he and the 60he to answer your questions, in my testing anything below 0.5mm should work fine, although I use 0.5mm I don't recommend it as it actually get compress and it could potentially mess up with some of the switches sensors. But in my experience I have not gone through any issue with it, but I still recommend using 0.25mm too avoid any issues.

[tribal tundra]

it doesn't say what mm 😭

[fluid ravine]

Millimeter

It should be stated in the descriptions

[tribal tundra]

ok

[fluid ravine]

of where you're buying it from

[tribal tundra]

im getting it off temu cuz im broke 😭

do these fit?

[fluid ravine]

I mean $5 for a set of 100 iirc
cheap as shi

Without any details of the switch pads in the image, I cannot say

[tribal tundra]

thickness is 0.5mm

[fluid ravine]

Again works fine, but should def avoid sensor issues, go for something thinner

like Aligner said 0.3 or below

[tribal tundra]

ok

[fluid ravine]

I agree with him on that when choosing switch pads

[tribal tundra]

ok

i can't find any 😭

they are all 0.5mm

this good?

https://www.amazon.ca/DUROCK-Switch-Mechanical-Keyboard-Switches/dp/B09KPKB5N9?

[fluid ravine]

Those are switch films

[tribal tundra]

oh

what do they do?

thocky?

[dapper kernel]

Make switch housing tighter but pretty much useless for jade and lekker

[fluid ravine]

Sorry to ask but is thock all you think about?

[tribal tundra]

ok

[dapper kernel]

Hearing this from THE THOCKSON is something else

[tribal tundra]

yes

[fluid ravine]

LIke ArtGZT said they're useless as these films are made for MX switches mold, HE switch mold is too big so they come out warped when installed

[tribal tundra]

ok

[fluid ravine]

Yeah-

[tribal tundra]

I CAN NOT FINDD ANY 0.3 MM SWITCH PADS

HELPPPP

[fluid ravine]

Again 0.3mm or below

there should be 0.25mm in the market

[tribal tundra]

i cant find themmmmm 😭

[dapper kernel]

Is switch pad even good for lekker since the switch just has a hole at the bottom

[polar girder]

Nah fuck a switch pad, homie

[fluid ravine]

To be honest, optional, for my board I do personally find a difference

Don't really need tbh

[polar girder]

Lolz

[fluid ravine]

lol

[sweet oak]

Why would you do that?

[fluid ravine]

LMAO

[dapper kernel]

With lekker i would imagine the switch to be almost completely silent

[tribal tundra]

why

[fluid ravine]

i mean if theres a-

[tribal tundra]

ok then

ig

[sweet oak]

Aw hell nah

[fluid ravine]

Sure ig

[tribal tundra]

do yall know how thick the foam is in the 80he?

[fluid ravine]

which foam

plate foam or case foam

[tribal tundra]

uhhh

idk

[fluid ravine]

;-;

[tribal tundra]

what is the difference

[dapper kernel]

80he use silicone, so foam is mostly at the bottom

[tribal tundra]

ok

[fluid ravine]

Plate foam is the pad/foam between the plate and pcb

Case foam is foam being used in the case

EPDM foam is being used as case foam for the 80HE

60HE as well iirc

[tribal tundra]

whhich one is added in keyboard modded

[fluid ravine]

?

No engles

[tribal tundra]

uh

[sweet oak]

Unrelated, but what case are you using Thockson? Im curious

[fluid ravine]

GH60 Grey Tofu v1 clone
gifted by The Thockfather himself

[sweet oak]

niiiiice

[fluid ravine]

Thanks :]

Special present lolz

[sweet oak]

Im craving the mocha redux

Never built a board so thinking itd be fun to do over the summer

[dapper kernel]

I want my 80he but i dread doing the stabs 💀

[sweet oak]

[tribal tundra]

how do u get roless

[polar girder]

Just not personally a fan of things potentially getting in the way of magnet/PCB connection

[tribal tundra]

i have beta updates??

ok

[polar girder]

It could work. But could also cause trouble

[tribal tundra]

makes sense

[polar girder]

And I’m generally more of a purist

Less is more

[tribal tundra]

the 80he has tape foam and gasket mods already

[polar girder]

Yeah that’s cool

[tribal tundra]

idk what mods to do thenn

[polar girder]

I think I want gasket mount for 60HE

[tribal tundra]

more foam??

[fluid ravine]

frrrr

[polar girder]

lol just lube the switches and stabs and you’re chilling

[dapper kernel]

Cant really do that unless there is plates for it

[tribal tundra]

true

wat are stabs

[polar girder]

Custom made plates exist

Stabilizers

[tribal tundra]

ok

ohh

should i do a bandage mod on stabalizers

[polar girder]

If you want to experiment, sure

But also I don’t use that

[tribal tundra]

k

[polar girder]

Stock stabs are fine

[fluid ravine]

@tribal tundra understand this, Mods in the keyboard hobby is mostly used to fix a problem in your keyboard and yet some to find a certain keyboard sound. Usually it shouldn't be used as if you WANT to mod the keyboard unless you got alot of money to spend on keyboards and mess around with it.

For now just get the board and if you have problems with it in any ways, slowly figure out the mods to get the solutions

[tribal tundra]

ok

[dapper kernel]

CAM was talking about the knight stabs coming with hole mod

[fluid ravine]

the hell?

that gotta be interesting

[tribal tundra]

also is the force break mod just a switch pad

[polar girder]

Too much stabilizer anxiety

[dapper kernel]

Yeah they call it injection infused or sth

[polar girder]

Well not exactly

Right yeah

Different solution to similar problem

[fluid ravine]

No, force break mod is for top mount keyboards

[dapper kernel]

But it’s basically just silicone on top

[fluid ravine]

puting tape between the metal contact of the chassis

[tribal tundra]

is that the wooting 80he

[fluid ravine]

reduces pinging

[tribal tundra]

ooh

[dapper kernel]

I dont like hole mod because it feels mushy for me

[fluid ravine]

80HE is gasket mounted

[fluid ravine]

Usually I'd say break it in but oh well I agree

[dapper kernel]

And without it the sound is so off from one side to the other even if i balanced the wires

[tribal tundra]

ohhh

is the kilmat mod just foam?

[polar girder]

Kilmat is a foam replacement

[tribal tundra]

this is my first time so i have lots of questions

[dapper kernel]

I bought 3 different stabs for my 60he and it was a nightmare because it was so tight and the stab doesnt go up

[tribal tundra]

is there a difference?

[polar girder]

There’a more things than foam you can put in your case or as plate foam

Kilmat, Polyfill, diff types of foam for case

Can put anything in there really. To change acoustics

Change how the sound bounces around

Can go empty for case and/or plate

Don’t have to have foam or silicone or whatever

[fluid ravine]

All personal preference

I favor in polyfill

[dapper kernel]

Stabs is my nightmare, others are easy to compared to getting stabs right

[fluid ravine]

so does Pops (Thockfather)

[tribal tundra]

too messy imo

[polar girder]

Kilmat is AKA dynamat

[fluid ravine]

Sound killer 🔪

[polar girder]

Sound proofing for cars

[dapper kernel]

I prefer denser and thicker case foams, reduced high pitch sounds

[fluid ravine]

Oo yeah denser foam

esp for pingy case

[polar girder]

I think so long as you can embrace experimenting and playing around with combos you’ll be able to make the most out of mods

[fluid ravine]

yessir

[polar girder]

Planning ahead and expecting to get it perfect the first time is a fools errand

[fluid ravine]

haha-

yeah... I wonder who made that mistake

[dapper kernel]

The foam that comes with wooting is good, wont really change it unless u dont like the sound

[fluid ravine]

agreed^

[polar girder]

IMO the biggest mod is mounting style

and lubing switches/stabs

Different switches matter

[fluid ravine]

Mod for a wooting 60he?
Yes indeed

[polar girder]

Right

[fluid ravine]

Mounting style just goes crazyyy

[dapper kernel]

He’s getting the 80he so there wont be much mods to do tbh

[fluid ravine]

yeah

[polar girder]

Oh mb

[fluid ravine]

Wooting trying to live up to expectation
I respect that

[polar girder]

Yeah I think it’s mostly just about the switches at that point

[dapper kernel]

All im doing will be jades hand lubed, and stabs 💀

[fluid ravine]

I know some will be disappointed (Like the size layout for example) but i mean like cmon

[polar girder]

The case foam and plate foam mods will change sound a little but it’s small change

[fluid ravine]

they do some good shi

[polar girder]

Fun experiment tho

[fluid ravine]

I just need to get my hands on some new switches and keycaps

[dapper kernel]

I was thinking about switch pads to soften the jades sound but nah too lazy

[polar girder]

I suddenly want aluminum keycaps

Soften Jade sound = don’t get jades

[fluid ravine]

I did every mods out of my wallet (a non existent one to be infact)

[dapper kernel]

I want the sound but not so loud but i dont know how loud it actually is because all i heard are videos

[fluid ravine]

I don't think switch pads for HE softens the sound

more like giving a fuller bottom out sound

i would say

[fluid ravine]

avoid tape mod

and try to use less denser foam?

[dapper kernel]

80he comes with tape mod

[fluid ravine]

then take it dafuq out

[dapper kernel]

I will keep it because it actually look nice with it explaining the kb components

Might give jades a heavier lube, hear jades likes it more

[fluid ravine]

yeah its pretty cool i agree

[fluid ravine]

well who knows
try it out first

then give some thoughts lolz

[cedar gate]

I honestly kind of wish 80he didn't have the rgb bar

[fluid ravine]

hmm interesting

[cedar gate]

If I want a no rgb build it ruins it

[dapper kernel]

I don’t like F keys but i got it for the arrow keys

Led bar is whatever, i dont really look at my kb anyways

[dapper kernel]

I think black = off so it’s just there but turned off

[pastel vigil]

Bro when are those xray keycaps coming out

I can't wait anymore lmao

[harsh dove]

https://tenor.com/view/winterz-soon-gif-19096204

[pastel vigil]

https://tenor.com/view/crying-crying-meme-gif-26327776

[uneven cradle]

group buy life

[pastel vigil]

It's not even a group buy that's the problem lmao

it's an instock set and am gonna cope a set asap for my tofu acrylic

[wet depot]

hmm should i lube my lekker 60s i just got today?

[pastel vigil]

We can't really decide that for you. If you are into that sort of thing, sure? If not and you just wanna game, it doesn't really matter.

[wet depot]

thing is they feel really gud

probably no need

idk if they changed their lubing methods but they sound diff from the sound tests ive heard on stock

[marsh saffron]

sounds tests also just sound completely different

[pastel vigil]

sound tests are a stupid lie

I am tired of them

[cedar gate]

Getting new switches is better deal than buying lube and tools

[dapper kernel]

Hand lubed is

[naive sage]

Did anyone else that built in the Salvation have a more pingy left side of the board as well? My thought is that it has to do with the USB port location, but IDK.

It doesn't particularly bother me in any case, I actually kinda like the way my Wooting sounds compared to other customs. It's different.

No foam but the included *plate foam, for reference. Jades, etc.

[harsh dove]

Check to make sure none of the leaf springs are loose

Can also try burger mounting it

[harsh dove]

They tend to come loose esp over time, best to use some purple loctite on the screws

[wet depot]

i just spent 4 hours lubing 61 switches i wanna die

[weak inlet]

and what parts of the switch have you lubed

[dapper kernel]

I spent 6hours when i did it 💀

[marsh saffron]

Same

[frosty delta]

anyone got recommendations for a case for the 60he

[wet depot]

tofu 60 redux

[wet depot]

top bottom stem springs

[light agate]

does anyone have any experience ever ordering keycaps from antidote studio?? i tried looking online and a lot of ppl are claiming that it's just drop shipping (which it looks like for some of their items) and to avoid ordering from there.. however for the particular keycaps i ended up being interested in, it isn't anywhere else

would love to get them since they'd look really good with my keyboard........ but would love it even more if there wasn't a high probability of getting scammed

[dapper kernel]

Most likely bought from china then, aliexpress, taobao or temu

[obtuse fossil]

can u tell me when theyre out ? i need one for my acrylic one aswell

[light agate]

i'll try to look for them on taobao, tried reverse image searching for these exact ones previously.. but sadly nothing came up besides their instagram post

..yeah, i sadly cannot find any other place for these keycaps

[leaden pawn]

https://wooting-technologies.notion.site/de7a52e2b5a941258a17e448b0c9d9b0?v=5ec0b31c59db4a51b8a86a1288249e9f

[wind karma]

i think sound tests wiht dynamic mics are always misleading....

they just don't sound pleasing with thosed

especially

[median spade]

Only thing worse is when people record phone sound tests, drives me nuts as they are so inaccurate

[tawdry tree]

Phone flat on desk next to keyboard so you hear each key through the desk and in an echoy room are the absolute peak of sound tests

[median spade]

[wind karma]

yeah phones too, my keyboard sounds so flat and horrible recorded by a phone 😭

[median spade]

As someone who has done/do proper sound tests

when I see someone has uploaded a phone one im like why

[median spade]

you just spreading misinformation basically smh

man what a good sounding keyboard, what switch???

is it the slam 30s??

[tawdry tree]

😂😂

[wind karma]

exactly

i'm assuming condenser mics would be most accurate but i haven't tested that yet

[tawdry tree]

Another Jades recolor. Spring is interesting though.

[median spade]

Dual stage spring has arrived to HE

Give us opaque top you cowards

[harsh dove]

I know

They resist to change the top housing

Boutta just buy more jades smh

[wind karma]

then there's this guy

a whole ape

[median spade]

Can even be pc still but going from clear to opaque does a lot

[harsh dove]

No more pc

[median spade]

give me nylon

[wind karma]

what does an opaque top do for the switch

better sound?

[median spade]

Change sound profile

yeah

[wind karma]

ohh

[median spade]

clear top pc notoriously the worst even on the mx side

[wind karma]

well

how do nylon tops sound compared to clear pc

[median spade]

depends on the switch

[wind karma]

oh

[median spade]

but can be deeper, and can be more clacky

[wind karma]

so there's no

general RIGHT answer to that

[median spade]

Yee

[wind karma]

i see

[median spade]

like oil kings from gateron are deeper and use nylon top

but then you have cherry switches, and HMX which are clacky

[wind karma]

yup

[median spade]

oil kings also use ink bottom housing however

[wind karma]

yeah

i'm guessing rgb would have to be really strong to get thru that

[tawdry tree]

nylon can be translucent too just not transparent I think

[median spade]

yep

[harsh dove]

No

You turn it off

Like a true enthusiast

[wind karma]

yeah ik

[median spade]

milky tops are usually a nylon blend

[wind karma]

i meant if you wanted rgb it just wouldn't work most likely

im guessing

[median spade]

it would just go through the channel on the switch

[harsh dove]

With opaque no

[wind karma]

cause ive never had an opaque switch

Ye

[median spade]

but yeah overall rgb would be hindered

or they could do what outemu did with boba

have a cut out for rgb to go through

[harsh dove]

With the window

Yeah

[wind karma]

yeah

[harsh dove]

Which might be the case for HE tbh

When they finally do opaque

[wind karma]

possibly

most people using HE switches are epic gamersz (professional rgb users)

probably

[median spade]

when they see the market grow even more to get more sound oriented people iti will happen

but for now they know most are gamers like antiq saying and the jades will sound good enough

[harsh dove]

Yep

Gotta have RGB for the gamers

[wind karma]

helps the performance ingame

[harsh dove]

And the fact HE is marketed towards gaming

So they gonna prioritize RGB

[wind karma]

yup

[harsh dove]

Let’s 3d print our own opaque tops @median spade

[median spade]

might have to at this point

[wet crown]

Are there any low profile cases compatible with the Wooting 60HE?

[median spade]

like the ones that show the switches??/

[opaque fractal]

Damn I should've joined the discord before buying sticky rices

[median spade]

Time to send them back for return

[split dagger]

I wanna do this so badly

[glossy pagoda]

How about we take the edginess down a notch or twelve

[split dagger]

My life was threatened and I’m very scared

[eternal crest]

?

is this 1978

or sum

did I travel back in time

[glossy pagoda]

No this is a keyboard discord

[split dagger]

Lmao

[eternal crest]

wtv bro, I suggest experiencing some hardship in life if you "police" that sentence

[split dagger]

Mr Akbar sir can I have your opinion on this per chance

[eternal crest]

snowflake ahh

[glossy pagoda]

My opinion on this is that the Alumaze60 looks nicer 😉

[split dagger]

How rich do you think I am

[mossy cloud]

but can you really put a price tag on swag?

[sweet oak]

Yes

[mossy cloud]

Well then it would be around 130 euro

[median spade]

I would sell you my black redux for cheap if I wasn’t leaving across the country tomorrow

[wet crown]

Yes.

[harsh dove]

Brought the white girl to work

Need my white wooting cable mark

[old swallow]

https://tenor.com/view/think-mark-invincible-omniman-bhondamous-gif-22025607

wheres my damn cable mark

[glossy pagoda]

https://tenor.com/view/soon-tm-soon-space-gif-23401891

[harsh dove]

https://tenor.com/view/well-be-waiting-james-dutton-tim-mcgraw-1883-well-be-waiting-for-you-gif-24553307

[cedar gate]

Hope you overlubed you switches lol wooting is loud

[harsh dove]

Nah, ultimate ear piercing clack enjoyer

I want my coworkers to know I’m hard at work

[dire thicket]

Hello everyone, i've heard that there is a vidéo from wooting where they're explaining how to dissasemble the wooting 60 for modding, where can i find it?

[harsh dove]

https://youtu.be/PsRcYxZgBCo?si=338xiK7xc4h0tQSs

[dire thicket]

Thx!

[harsh dove]

https://youtu.be/WN_-GYLTfpY?si=RddYFZtUFsNLzW6C

[dire thicket]

Oh pretty nice! Is this ok? https://fr.aliexpress.com/item/1005006554207379.html?spm=a2g0o.cart.0.0.5dd1378dNJXMsm&mp=1&gatewayAdapt=glo2fra

Or should I take a better one? It's my first time, i only saw content creator making this, never tried by myself

[harsh dove]

That’s fine for stabs, some users said they used it on switches but it’s quite thick, you can get a whole kit with tools for around $15-30

Wooting sells their own kits as well

[dire thicket]

So that's not OK for lubing switches?

[harsh dove]

You can, but 205g0 would be better imo

[dire thicket]

Mh, do you have a link maybe?

https://fr.aliexpress.com/item/1005004712676802.html?spm=a2g0o.productlist.main.3.538a5eeck6qEaX&algo_pvid=c09652b3-5a8d-4b32-a028-706444b3b4aa&algo_exp_id=c09652b3-5a8d-4b32-a028-706444b3b4aa-1&pdp_npi=4%40dis!EUR!7.91!7.91!!!8.40!8.40!%40211b613917162247158904891e29df!-1!sea!FR!2619017799!&curPageLogUid=rpXCMi1S3Zjo&utparam-url=scene%3Asearch|query_from%3A

this one is good?

[harsh dove]

https://wooting.io/product/blank-switch-toolkit?Option=Wooting+Lubrication+set

Full kit from Wooting for $23.99

[dire thicket]

How much should i need for all switches?

[twilit folio]

Gateron have just released new jade with dual rail but I’m pretty sure they are incompatible with wooting because of the extended mag inside the switch am I correct ?

[harsh dove]

That kit will be enough for multiple boards/sets of switches

[harsh dove]

They’re incompatible because of the polarity of the magnet, it is South Polarity, Wooting uses North Polarity

They have a Mini N version that will release soon that may be compatible

[harsh dove]

https://loobedswitches.com/cdn/shop/files/5_f9363f0b-4b6d-486f-8350-25b75fe2d580.jpg?v=1715717054&width=1200

@median spade

Need this for HE

BCPs

[polar girder]

Disclaimer: I don’t like those tweezers

Can’t grip shit

[polar girder]

Fr fr

[harsh dove]

Wonder which manufacturer will be the first to do opaque top

[median spade]

BCP HE would be great

[harsh dove]

It’s almost starting to bother me that there isn’t a different top yet

Or even talks of one

[median spade]

The funny part too all these other companies doing clear top PC too lol

or the pa12 nylon

the geon raw new one is at least milky top it appears which is good

[harsh dove]

Yeah I think Raptors are the only Nylon top right?

[median spade]

ye

"nylon"

the new raw are milky top PC so should be better somewhat

[cedar gate]

One time I took a custom a colleague gave me a membrane and begged me to use it lol

[harsh dove]

Ima grab some fuck it

Need to entertain myself

[cedar gate]

I then swapped my work kb with silents

[harsh dove]

Gonna see if I can franken switch em

[cedar gate]

With what

[harsh dove]

Jades

Won’t ship till June 15th

So about 3 weeks

[median spade]

I'm about to leave across the country for 3 months tomorrow so probs won't even have my setup or anything to game with

[harsh dove]

Rip

[median spade]

Go hiking every day or something

[cedar gate]

I'm prolly the only one here who regularly hikes daily lol

[harsh dove]

There you go

[median spade]

DOUBT

[cedar gate]

Almost 7 miles in the early morning 6-7ish

[median spade]

Dan I think you're like a fake person at this point

[harsh dove]

https://tenor.com/view/doubt-press-x-la-noire-meme-x-button-gif-19259237

[cedar gate]

Me?

[median spade]

Yeah or you really are 15 and I'm not misremembering

[cedar gate]

BTW is hiking just walking for a really long time

[median spade]

[harsh dove]

https://tenor.com/view/here-we-go-again-gta-gif-20483040

[cedar gate]

Nope I'm 15 not working o. My masters or anything

[median spade]

I'll come say hi to you cam

[harsh dove]

Ayeee

[cedar gate]

...

[harsh dove]

We can go hike and grab some drinks 🍹

[median spade]

[cedar gate]

My morning routine in kinda brutal tho lol

First I wake up at 6-7 ish walk/run at least 6 miles usually more than don't eat till noon at noon I have a smoothie only real meal is dinner

[harsh dove]

Dan do you find yourself to be a humorous person?

[median spade]

[cedar gate]

Honestly I think I'm subtly funny

[cedar gate]

But yeah its igor voitenkos morning cutting routine great for losing extra fat you gained while.bulking

[cedar gate]

I don't usually follow his workouts but his diet advice is great

[polar girder]

Good man

You know if there’s any ambition for plate mount swagkeys knights stabs, @harsh dove

[harsh dove]

I doubt they’ll make any but who knows

[polar girder]

Meh

Thanks

[harsh dove]

lol no problem

[harsh dove]

What is your stab setup rn?

Just wooting plate mount?

[polar girder]

Module screw in

But I’m going to order 461E I think

[harsh dove]

Oh but you want plate mount ?

[polar girder]

I also have TXAP plate mount and clip-ins at home

Yeah gasket mount, plate mount seems sweet

[harsh dove]

And you just want the knights cause you want quieter right?

[polar girder]

Yeah

All quiet everything

[harsh dove]

Was gonna say you could try, bandaid mod and/or holee mod to potentially make them quieter

Or even stabilizer pads underneath

Like the 80HE has

[polar girder]

I think I just need to buy the 461E

[harsh dove]

Lmao

[polar girder]

Gasket mount too good

And also do stuff to stabs lol

[harsh dove]

Yeah it’s nice for HE especially

How about no

[polar girder]

BLOCKED

[harsh dove]

Now ima have to go check each channel

[polar girder]

https://www.amazon.com/PORON-Stabilizer-Pads-Mechanical-Keyboard/dp/B0CFGZTCN7/ref=asc_df_B0CFGZTCN7/

This good? @harsh dove

[harsh dove]

Yep

I used them before

Definitely a personal preference type of ting lol

[polar girder]

Oh that’s for PCB mount tho

Good for plate mount?

[median spade]

Even better for plate mount

[harsh dove]

Yeah still works

Cause the stabilizer stem still hits the PCB

And that’s where the pad sits

[polar girder]

Gotcha

has no clue

[cedar gate]

A lot of people's space bar sounds bad including mine but it's not the stabs usually tbh it's the case and the switches after I swapped the lekker to the jades and put it in a tofu it sounds SO much better

[harsh dove]

It’s because they don’t have GMK spacebars

[median spade]

Pics or didn’t happen

[polar girder]

Mine sounds great

But yeah not the stabs

So much stab anxiety

Just lube them and maybe grease them

Get better switches

[harsh dove]

My method is just, as long as it sounds like a helicopter

I want my stabs to sound like they’re about to take off

[dapper kernel]

Mine sounds like a helicopter crashing

[polar girder]

I want my stabs to STFU

[polar girder]

Too soon

RIP

[normal schooner]

[old swallow]

https://tenor.com/view/quickly-that-escalated-quickly-joker-the-dark-knight-dark-knight-gif-5841756

[polar girder]

Any KBDFans discount codes?

[median spade]

No codes except for the ones they give you

[cedar gate]

I'd like to sincerely apologize for making fun of you all for buying switch pullers earlier this week

Prying them off with tweezers is so freaking hard

[polar girder]

Good.

Thanks.

[harsh dove]

I can get you $5 off

[polar girder]

Ayyy

Just realized I could wait for ali express to save on shipping 😅

[harsh dove]

LOVEKBDFANS is the code

[polar girder]

Thanks bro

Just trying to confirm ill be able to get a custom plate for it

Need the plate file from KBD to give to Tom

[harsh dove]

For the 461E?

if I recall, you don’t need a custom plate?

[cedar gate]

AND NOW YOU TELL ME

I COULD HAVE USED THAT A MONTH AGO LOL

Rip 5$

[harsh dove]

Rip

[harsh dove]

Uses standard plates as far as I’m aware

The gasket just goes between the plate and PCB like plate foam or silicone would

[median spade]

You just need a standard 60he plate is all

[harsh dove]

^^

That’s honestly what makes it so nice, you have options and you don’t need custom plates for it

[polar girder]

Oh dang really ?

Yeah I couldn’t make sense of all that stuff

Seemed like just a plate foam replacement

Thought plate still needed some custom mount thing

[median spade]

nope

you just take your current plate(s) and then put the plate foam gasket in

and that's it

[polar girder]

Oh damn ok

I kind of want a nylon plate anyway tho

But sweet, thanks for info

[harsh dove]

It actually works the same way the 80HE does

As far as I can tell

[polar girder]

Idk what that means lol

[tawdry tree]

You’d put it in similar to a friction mount but with this it “clicks” in place seems like.

I wonder how hard it is to get out

There’s a hook or something included I think.

[marsh saffron]

Probably easier than friction mount

[polar girder]

Gasket mount or tadpole mount??

Superior???

[median spade]

with HE

not much difference tbh

they're both isolationg the plate with rubber or another gasket material

[polar girder]

Right on

Yeah hard to beat for $120

[harsh dove]

If you look at how the 80HE gasket works and how the 461E gasket works, it’s the same

[fluid ravine]

interesante

Sup guys

[fluid ravine]

Ayy the nipple case- Trademark by Pops

[harsh dove]

Can’t believe he said such a thing

[fluid ravine]

LMAO

well theres pops for ya

[polar girder]

Lol I understand what “the same” means. I just meant I haven’t taken the time to understand the implications of that or how it actually works

[polar girder]

Well I guess I gotta get it

Plus they have that design contest for best nipple design

So that’s cool

[fluid ravine]

[cedar gate]

Why are the screw holes in the tofu so hard to screw in

[harsh dove]

Ah okay gotcha lol

The case basically creates a sandwich

With the silicone gasket in the middle

Clamped down by the top and bottom of the case

https://youtu.be/TbC4UpRDf48?si=EhU-kfF9ya6RtSoz

Can skip to half way

[polar girder]

Interesting they went gasket mount but screw in

Hmmmmm

[fluid ravine]

dude-

I just showed my friend that bought me my wooting the nipple case and I said "Look it's a nipple case, I want tat" as a joke of course
But then bro proceeds to order one a few minutes later and say "I bought it, I don't even know what it is for"

...

[tawdry tree]

“as a joke of course” … “few minutes later says “I bought it””

🤣

[median spade]

yeah that's what I was saying why i't snot biggest deal with HE rn

in order for the performance to be consistesnt you need to screw pcb to plate to keep switches as close and level to magnet always

[harsh dove]

Plateless HE when

[pastel vigil]

HEless plates when?

[tawdry tree]

If only sticky rices were stem swappable.

[harsh dove]

For plateless HE, we’d likely need 3 or 5-pin plastic pins for them to work

[tawdry tree]

nahnah, screw in switches bro 🔥

[pastel vigil]

https://tenor.com/view/art-scarface-supernatural-sad-horror-gif-2728156965924579840

[polar girder]

Is that not the case with regular mechanical switches?

I’m just a noob and in my HE bubble lol

[median spade]

nope they have legs and the pins to keep the distance

and solder in other cases

[fluid ravine]

Well well well

Look what keyboard we have to lube here

And a free switch and keycap puller from my besto friendo

"Gasket mounted"

this shit stiff as a rock

[harsh dove]

Get to work!

lol

Those keycaps bother me slightly

[fluid ravine]

the font...

[harsh dove]

Feel like the legends should been dark purple

[fluid ravine]

or legend

its kinda

Big

[harsh dove]

The white contrast is weird

[fluid ravine]

and that^

[polar girder]

Ohhh right right. Ok yeah I knew that

Yeah Black plate always wins

[polar girder]

White legends. White little poking out bits underneath

TRASH

[fluid ravine]

😂

[polar girder]

Why that spacebar have a 5 lbs spring?

lol jk I’m just trolling

Godspeed bro 🫡

[harsh dove]

Bro tried clicking the knob

That’s not a switch brother

[fluid ravine]

I mean it clicked

[harsh dove]

It did lol

I had to rewatch to make sure

[cedar gate]

My first build stock with tape mod burger mount jades and tofu

[cedar gate]

Wanna get the wob crosshair and maybe a pc plate if it's worth it

[harsh dove]

If you're rockin the Steel plate with those Jades, PC plate is def worth it

[pastel vigil]

The Steel plate is unbearable, it's a shame its stock.

[harsh dove]

for MX it'd be okay but for HE, it hurts

[tawdry tree]

Really not sure why Woot does not seem to want to drop the steel plate already 😂

[pastel vigil]

If they dropped their price I'd be fine but at the price point it sells at, the PC would be huge.

[tawdry tree]

I’ve thought about it long and hard and I really don’t see any benefit in Woot’s plate, neither from business nor a consumer’s perspective.

Seems like a lose - lose really

[polar girder]

Win win

They use existing infrastructure/systems, and get to upsell $20 PC plate

Plus customers can have options

Steel plate much more user friendly

Fool proof

pc Playe more room for error

It’s soft AF

I honestly don’t even like it that much but I prefer the sound over steel

[median spade]

mass manu steel cheap af

is why

[fluid ravine]

We still get these type of shit stabs???

oh nah fk this

[polar girder]

Devilish contraption

[brazen sparrow]

Are these the clip-ins?

these aren't the ones that come with the module right?

[dapper kernel]

Its the ones with uneven bottom which means u have to do the clip mod

Every time i see stabs my ptsd comes back

[polar girder]

Yeah im glad i was late to the game lol

Hate that jank shit

[fluid ravine]

these are plate mount

[fluid ravine]

im currently lubing this keyboard ^

Epomaker The8 SE

[fluid ravine]

well i did for on

e

but it made the modifier hollow

so ima not clip these

just lube them

[tawdry tree]

Would be the same with a PC plate which I don’t doubt is preferred by most, so it’d make a better product.

[tawdry tree]

Paint chips and rust? What’s not user friendly about PC?

[fluid ravine]

holy shit i cant take this keeb apart

fking annoying cheap ah clip moutns

fk

[tawdry tree]

Stamped steel isn’t cheaper than PC, surely.

[tawdry tree]

lost to stabs gg

[median spade]

You would think, but all the $20 prebuilt on amazon also use steel

[tawdry tree]

I’d think cause the mold for PC is more expensive than the pattern for steel, maybe

Many have plastic plates too

[fluid ravine]

no no not the stabs

well maybe

im talking about the case

[tawdry tree]

lost to case, even better

[fluid ravine]

this piece of shit

[tawdry tree]

oh lmao

[fluid ravine]

i hate these

[tawdry tree]

is it possible to open w/o breaking it? 🤣😂😂

[fluid ravine]

got it

[harsh dove]

@fluid ravine I can help you and your friend

Get him a wooting

Problems solved

[fluid ravine]

real

80he

problem solve

[uneven cradle]

Might as well just get rid of this channel with the 80he coming out

[fluid ravine]

no...

Not getting rid of my home
Our home*

[polar girder]

Jail

[polar girder]

looks perfect for those raptor raws

good looking set

[uneven cradle]

Got my keycaps ready for my 80he

[harsh dove]

Now just need the Xrays

[harsh dove]

One of my fave sets

[uneven cradle]

Which case is this? Tofu60?

[harsh dove]

and my ghost cable

[polar girder]

yeah top 5 set for me too

[harsh dove]

the white one? yeah the redux

[uneven cradle]

Had my eye on it for ages but finally went on sale for around the price of the group buy

[uneven cradle]

Can't go wrong with a tofu

Not sure if I'll end up cerakoting my raw zinc 80he, guess I'll see how it looks when it arrives

[harsh dove]

Yeah I debated on raw zinc or white zinc

went with white

[fluid ravine]

Bro this epomaker board a scam
Although i say this shit was hard as a rock even when they stated it was a gasket mounted keeb, but like bro, even when having the plate assembly with one half of the case with the gaskets, there isnt even any gasket performance in this shit ;-;

[uneven cradle]

Cheap for a reason I guess

[fluid ravine]

90 bucks

gmk67 gasket performance better 💀

@stray tiger Pops I want to use polyfill but I'm worried about the battery, should I be using it?

Wanna see if replacing the foam would make the gasket performance less harden

[uneven cradle]

I wouldn't want to risk that

[pastel vigil]

anyday now

[cedar gate]

I wonder why they went with zinc over aluminum?

[dapper kernel]

they had trouble with cnc alum cost i think

[cedar gate]

Oh that makes sense casting zinc is prolly cheaper than milling alu

Less waste

[uneven cradle]

Yeah Calder talked about it in one of the livestreams in more detail

[cedar gate]

And machines are prolly cheaper

[cedar gate]

But wbt the quality is zinc equal to alu

[dapper kernel]

and heavier too which i prefers

[thorn zealot]

I saw in their latest stream that they are releasing new cables

Anyone know when?

I think I heard them say this week or sometime soon

[paper bloom]

Shld work

Unless u do a poly fill first then do a cutout

But make sure it has some room to breath else if the batt heats up I think thats it

Cuz thats an lithium Ion battery and doing a polyfill esp if its above or covered entirely from my knowledge WONT have an issue but the chances of rare blowups or some sort of cable problem cld arise down the line

and if u plan to get a new batt Then its a lot easier as well O and don't forget to account for heating properties make sure the polyfill isnt flammable

JUST incase if the battery goes

[uneven cradle]

Just take the battery out because wireless is useless anyway

[paper bloom]

^Unless you want that capability then thats up to you

[fluid ravine]

Ain't my board so idk

[paper bloom]

Better ask ig

[fluid ravine]

I just want to see if there's any potential bounce with a dampener

Cus the stock is pretty firm

[paper bloom]

Shld be

[fluid ravine]

Oh btw polyfill isn't flammable

Unless at a certain temp

Like 200 or 500 f or some shi like that

[paper bloom]

Ig it depends on what type of it as well

[fluid ravine]

Static wise however

Idk about that

[paper bloom]

Eh shld be fine

Meanwhile im thinking about procurring a

[fluid ravine]

Wait

If my friend uses usb

[paper bloom]

540HZ BENQ moniter or ima wait for the 480OLED LG

[fluid ravine]

Would the battery not do anything?

[paper bloom]

Depends on the board

[fluid ravine]

[paper bloom]

If ur friend uses USB ONLY the battery wont do shit

Unless he feels like running a wireless capability then theres something done to it if its removed

[fluid ravine]

What abt dongle

[paper bloom]

U need the dongle for the board which is on the chip

If u remove the battery it wont do anything

[fluid ravine]

So the dongle doesn't require the battery?

[paper bloom]

From my understanding if ur talking about the PCB

[paper bloom]

For this

[fluid ravine]

Yeah ig

[paper bloom]

then yes it needs power/a battery

[fluid ravine]

K

[paper bloom]

FOR wireless

BUT idk how the PCB is done from looking at it looks like a regular logitech board

BUT id say keep it

[paper bloom]

Case someone goes on a rant

[uneven cradle]

Cheap board with cheap battery, I'd remove it just because I don't want a fire hazard in the house

[polar girder]

All wired everything

[uneven cradle]

https://youtube.com/shorts/hIA_25MyyYQ?si=J9xC_7ifV7w-bP8S

Polyfill doesn't seem that non-flammable

[polar girder]

toxic af

[fluid ravine]

Alr I asked him about the battery

Ah
Lubing switches at 12am mid night

A time where my mom yells at me to go to sleep and my dad not giving 1 fk

Gotta love school

[polar girder]

“Just don’t fuck up, son”

Classic dad advice lol

[pastel vigil]

All the more reason I avoid wireless shit that I don't need to be wireless

[polar girder]

Wired mouse, wired audio, wired keyboard, wired mic

What else

Wire it

[dapper kernel]

Wireless pc when

[polar girder]

Never that

Although the BTF stuff is kinda sweet lol

[paper bloom]

MAGNETIC Motherboards soon

[polar girder]

Magnets are bae, ngl

[dapper kernel]

With how gpu keeps getting bigger, i have a lot of doubts

Like technology didn’t really improve, rather they just added more components 💀

[marsh saffron]

Everything but my mice are wired

I like wireless mice too much can't go back

[polar girder]

Yeah I go back and forth but I don’t mind the right setup

I generally prefer wired mice tho

[marsh saffron]

I haven't used a wired mouse since I got my gpx

[polar girder]

I have deathadder v3 wired, op1 8k wired and m3k modkit (wired)

[marsh saffron]

Only one id consider would be op18k or m2k/m3k

[polar girder]

Should probably sell the op1 8k tho

[marsh saffron]

But id still prefer wireless

[polar girder]

Yeah they’re nice

Wireless is also nice lol

[uneven cradle]

Things have gotten smaller the last couple generations, shits just getting more complex 2080 ti was a 754mm die that thing was huge

[marsh saffron]

5000 series is gonna make my o11 dynamic look small

Shits probably huge

[dapper kernel]

yeah 50series will be like 10% bigger probably

[uneven cradle]

I'm a fan means my computer runs quieter

[dapper kernel]

cards are already bending because of how heavy and big it is rn

[harsh dove]

I doubt 5000 series will be bigger
4000 series air cooler were already over engineered
they'll just use the same coolers for 5000 series most likely

[uneven cradle]

That's what I'm thinking, I doubt the die sizes are getting bigger and the coolers are already overkill

[paper bloom]

Imagine your 5000 series card is slowly reaching half your hall way

And then the 7k series is just gonna be through the wall

[pastel vigil]

8K is actually a case, you just install all the other parts to it

9k is a house

[split dagger]

Anyone know some good keycaps that are grippy because my hands get a little sweaty playing sometimes and just wanna get a nicer pair of keycaps

[wind karma]

hey guiys i accidentally disabled windows key somehow, how do i get it back lol?

[elfin garnet]

could go with something like this:

https://shop.tai-hao.com/categories/22-key-rubber

they wear over time tho

[elfin garnet]

Depends how you disabled it. If you removed the key entirely from the software you need to put it back in the "Remap" section

if you locked it by a shortcut, try FN+win key to unlock it

[elfin garnet]

Otherwise I recommend getting some quality PBT keycaps. They have some texture to them so they grip more. PBTfans is a good option

[wind karma]

nope i didn't do that

[wind karma]

that doesn't work either

[elfin garnet]

Unplug the keyboard and plug it back in

[wind karma]

the windows key has no rgb coming from ti either

[wind karma]

alright

yeah that worked thanks

[elfin garnet]

np

[sacred jay]

it might just be too warm where u are

[paper bloom]

Keycapo

Has not bad ones

The wooting ones are also good

[frosty delta]

anyone know the difference between the tofu60 and the tofu 60 redux

saw both of them and not sure which one is better to get

[near barn]

tofu60 is the original, it's (afaik, MOSTLY)compatible with the wooting pcb

tofu60 2.0 is NOT compatible

tofu60 redux is the redesign of tofu60, with a adjustment to the port which allows wooting pcb to fit easier

[frosty delta]

redux is the way to go then. tysm

[stiff dagger]

Hey guys, I finally got the jade switches into my wooting but I have a question. I read somewhere that the jades has to be adjusted at some point, because there is a difference of the activation point due to the larger springs or something

[near barn]

u ain't gotta worry bout that

just plug n play, the keyboard will do the rest

[near barn]

the only thing you'd need to worry about is making sure ur firmware is up-to-date; i'm always running the latest beta and the jades have been working fine

[stiff dagger]

Oh really? Thaht's awesome. Thank you

[near barn]

yup!

do note though, because they ARE in fact, shorter, your activation points are much tighter

say you set it at 4.0(even though that's physically impossible), it accomodates by making the whole range fit within how far the jades go

hope that makes sense

[stiff dagger]

hmmm

I'm not really sure

[near barn]

i could be wrong, but in a nutshell i believe ur actuation points are a bit more sensitive(for better or worse)

[stiff dagger]

I see

Well I'll look how it feels and make some adjustments over time if it's necessary

[tawdry tree]

Correct, if you use the Jade switches with an actuation point of 1mm, they’ll actually actuate at 0.875mm in practice.

[thorn zealot]

So is it like a ratio between the normal 4mm and 3.5mm ig?

[tawdry tree]

Jade switches have a physical travel of 3.5mm and Lekker switches have a physical travel of 4.0mm. You can set both to 40 different actuation point so for Jade switches: 3.5(mm) : 40 = “steps” of 0.0875mm and for Lekker switches: 4.0(mm) : 40 = “steps” of 0.1mm.

Wootility states mm when setting an actuation point but it is actually % rather than mm.

[old swallow]

just use 0.0mm, then it will be the same for both

[austere creek]

#1019755933959733258 @uneven torrent

[uneven torrent]

aha ok ty

[tawdry tree]

0.00mm actuation point wennn

[glossy pagoda]

Let's keep the random gif spam to either #🐸│memes or not at all, thanks

[brazen sparrow]

Is it still planned to have wootility try to recognize if jades/ other switches are being used.

[median spade]

Yeah and it recalibrates anyways when you unplug and plug in again

[random dagger]

would this full size case be compatible with the wooting 2he pcb?
https://akkogear.eu/products/monsgeek-m5-diy-kit?currency=EUR&variant=43265633616071&utm_source=google&utm_medium=cpc&utm_campaign=Google Shopping&stkn=b57c867d0c91&gad_source=1&gclid=Cj0KCQjwjLGyBhCYARIsAPqTz18VS7UF2d5hMxRAhhKC4jAFu_jxV2V9xDgnHIDWGtGtWcY0wk78ofEaAhY5EALw_wcB

[stray tiger]

It has not been reported as being compatible

[median spade]

No

[random dagger]

but are there any compatible for a full size?

[median spade]

None that we know of

[tawdry tree]

If you mean a select switch feature, then yes.

[cedar gate]

I am kinda conflicted should I get the polycarbonate plate I'm getting a lot of mixed information

I have a wooting 60he+ with the tofu60 redux with brass weight and jade switches

Also planning to gasket mount with bakeneko 60 30A and get wob crosshairs

[harsh dove]

Mixed information?

[median spade]

bakeneko huh?

[leaden pawn]

60he+ comes with pc plate installed, wym?

[marsh saffron]

Yeah but black PC plate is better looking 🤷

Worth the 20$ imo

[harsh dove]

Not if it’s a prebuilt

Prebuilt comes with steel plate

And plate Mount stabs

Only module comes with pc plate and screw ins

[thorn zealot]

what are the benefits of gasket mount?

ive seen alot of talk about them here

and how can u do it with the wooting?

60 module specifically

[polar girder]

60HE+ module *

[polar girder]

New 461E case I think only way idk

[leaden pawn]

ye mb

[polar girder]

Pre-order only rn

[polar girder]

Word

[median spade]

https://keyboardcentral.net/case-mounting

https://www.keyboard.university/200-courses/keyboard-mounting-styles-4lpp7

enjoy