#🔧│keyboard_modding
1 messages · Page 210 of 1
Sticky rice as well, but they no good
you know, i probably shouldve checked that before responding lol
raw he is 3.4 or something aswell
are the raw switcehs known to be good in the keeb community?
is that series good?
I don't think anyone's tried them yet?
too fresh to tell
Geon is Goated
And the other raw Mx stuff is great
Gateron Raw and Bsun Raw are good
are there any high quality keycaps that i can buy on amazon?
I have them on hand
sticky rices have magnet issues appearantly, Dashes are just Jade recolours and Raws are unreleased. so i guess jades are the only short travel switches. (that are good/released for now)
Amazon is mostly low quality stuff and clones
yeah ik i js wanted to buy a set of high quality ones from amazon cause i got a giftcard
so i was wondering if there were any high quality ones on amazon
Bsun and Gateron are good
im sure theres some. i mean, is there anything that isnt on amazon
i see
its kinda sad that i like the way tecsee swtiches feel but
their
materials dont last long especially uhmwpe stem
fair enough, i was js wondering if anyone here had knowledge of a high quality set / manufacturer sold on amazon to save time
can i use krytox 205g for stabalizers or should i use grease from wooting? is there really much of a difference?
if not im just going to use my amazon gc on krytox 205
TO LAUGH OR NOT TO LAUGH? THAT IS THE QUESTION...
As promised, the lubed and spring swapped comparisons of all six RAW switches: BSUN, Gateron, Haimu, Huano, Keygeek, and Tecsee! Comparisons to stock are at the end of each sound test. I was a bit surprised at how little the spring swap affected the overall sound of the switches, but at least w...
bruh every single he switch is POM stem PC top housing NYLON bottom
right yea yeah, fair enough
This guy went in depth on them
oh geon uses nylon twice
pom pc nylon pom pc nylon
i think you can use 205 for stabs, but its just kinda unnecesary, so people just use grease for stabs since its cheaper
Pom stem will be most common always
Low coefficient of friction
LY is another one and UMWHPE sometimes
yeah i love uhmwpe stem
and PC top, cause oooooooh shiney lights ooooooooh
most of the switches i love have uhmwpe stem
ah thats why
PC top can be good if it’s opaque but it’s so rare 
that makes sense
ok am i misappropriating material science or does clear plastic usually sound more
Yes
higher pitched
It does yeah
ah. well im getting the 205 for my jade switches, so can i just use it on the stabs aswell?
Opaque tends to be more muted
yeah....
i think so, but i never actually lubed switches/stabs. sooo yeah
might need someone more experienced for that
Stabs are better with something thicker but 205g0 works
It justs it tends to spread out over time
i dont use anything on my stabs cause im lazy
fits wooting 🤔
pffft, actually just slap a stick of butter on your stabs
makes it....... smooth like.... butter
fire no?
400 for a case is interesting, does it sound btr than the redux?
Would avoid Baionlenja tbh
sound better is highly subjective
or look better? i cant really see from the pic, but doesnt look like anything too special
fair enough
it probably doesnt sound better lmao
im pretty sure its only o ring mount
its just looks fire af
Also
eh idk man i dont think ive heard any build that sounds btr than the rdux regardless of the sound they were tryna get
What does "raw" mean in the context of switches btw?
oh
not compatible
rip
wow they actually included that in the descrption thats crazy
no lube, just going raw
wait what
hm?
ye why else would u get a 60% if not wooting?
That's just your opinion though, which is subjective. There are no objective standards when it comes to what sounds better with keyboards because it's all individual.
salvation is actually good
i cant say its good for the price
okok, what case have u haeard that sounds btr than the redux?
in ur opinion
i cant say that feel and sound is worth the price but
i mean if you get it used or at 200 its
its something to think about
:)
You are asking the wrong guy, I don't care about sound. I think the stock case sounds best lmao
interesting
its just a value proposition, it does actually sound and feel better
me when my wooting sounds pretty good but i never hear it cause i use it for gaming and i game with headphones on
Sound tests are meaningless anyway. It's all about how your components sound in your build in your space. Listening to a random guys tofu and then a random guys alumaze online doesn't really inform you well on the cases.
honestly I just use my sweat
unless, it is the alumaze and redux from the same guy online, you cant know what it will be like for you, but you have some degree of comparison
pffffft, sweaty nerd
heh
hehee
Yeah, but even then, what if the mic is biased and picks up on high pitched sounds more, and then you get the case and realize, in your space, the difference you felt online isn't present because it was just the mic.
i use my spine fluid personally
ugh nurd
i think you mean "ugh~~"
👀
i mean yeah, offcourse, you can never get a 100% accurate sound, but its a decent comparison
Shotgun mic :D
metal cool nuff said
anyone that knows mic stuff can u help me make my samsom g track pro sound good pleaseeeeeeeeeee
I personally feel like more often than not, it's not really an informative comparison, there is no substitute to trying it yourself. A lot of things I thought I would like or not like based on the comparisons I did online, only to try it and get the opposite result.
But that's just part of the journey. There's no map to endgame.
you just gota know a guy
or spend your own money to test
and then know how to sell it
i js buy whatever looks the best that has comments that say "i busted a nut after i tried it myself"
I've got 4 60hes and already sold my least favorite lmao
oh yeah, but as what duke said, thats not an option for everyone. so sometimes you just gotta take a bit of a risk, but try to get as much info as possible
why do u have 4 and can i have one
testing things out is addictive
i have 2 haha
Blank you can buy my black tofu redux with weight 
wait. i have one of those
oh god that url
i have the black tofu redux with the weight im tryna sell it lmaoooooooooo
Delete everything after html?
why you tryna sell it, didn't you just say it sounded the best
cause i dont have a 60he
lmao
but to answer, yeah. Magnetic Jades are pretty damn good, its all subjective, but a decent amount of people consider this the best HE switches
what is it a tofu?
gotcha.
ye the tofu redux
switches and keycaps?
https://www.aliexpress.com/item/1005006738645806.html these are cheaper
they are being sold at a bunch of places, make sure to find whichever is cheapest/quickest yea
nah just the case, mint condition factory sealed with the weight and a wooting compatible plate that i forgot the name of
since you forgot the plates name, i will name it. your plate is now called bob
@median spade btw why you keeping the freebird and not the tofu?
i leave naming roights to whoever buys the thing from me lol
W name tho
🇧 🇴 🇴 🇧

neuron activation
sameeee
i love monkeys sm
he's just like me fr
Also love frogs. I have a frog tattoo lmao
fuck
it is now
ty
bob the frog
or is it frog the bob?
i like how this whole channel spiraled into madness, and then theres just the occasional actual conversation going on
what keyboard modding does to a mf
seems legit
keyboard modding my beloved
wtf is this price? The first batch were like 500aud and cough hidden from current archive. I like Baion's 'alien suck the life out of my face and wallet' theme... but that pricing for a 60%. Ooofff 
we out here using the randomest parts and materials to "improve" our builds
that case looks like ass
its artsy
this guy designed the gmk nerves
me sticking bread in my case... ooh yeah, thoccs
i use moss instead of foam to dampen my builds
makes the noise thockier
mossier
mmmmmm mosss
its organic
oh ok...
vegan too
our keyboards are alive...
am hungy
yep
monkey brain?
hot take: neon fonts on white do not work. Gmk nerve mid imo
lmao
lovin the server
and yet i still havent found a high quality keycap set on amazon
that set is one of the worst GMK sets Ive seen
WHYYYYYYYYYYYYY
It just screams edgy teenager with no class
nah dude, it screams kids toy
im an edgy teenager with no class so id know
hey, its about what you like, not what others like. sooo yeah, you do you
no thats fine lmao
Big true
its giving bile
best gmk yet to exist
CONSUME
its giving

i mean, that would make it better
i can see why without the novelties the colorway is mid
bionicles are mid
i can kinda see that logic
Bionicle is love, Bionicle is life
I also opened the nerve IC in geekhack and it was so much drama
would turn me off getting it even if i liked it
hell naah they always end up in like a weird amagamation of part in the shape of a ball
honestly idk, i never really had bionicles. but i heard people on the interwebs like them
i had a few
not my thing
legos ftw
^^
and use them with?
ill figure that out later
It's really hard to mix and match sets
a lot of things you think could work, until you try it out and then realize the shades don't actually work
novelties still ugly af
it does
more mass
more thock
More dust = better
i cant tell if its hollow or filled with resin
im filling my keyboatrd with sand now
I like the part where the artisan dude is claiming that honeycomb type design was his 
thats hollow, resin distorts light a little
bro gonna claim he invented grey next
Looks filled with resin to me
lmao, instantly 2 different responses
read the description
🤔 gmk nerve novelties with eva alphas
pfffft, reading is for nerds
trueeeeeeeeeeeee (hides books)
nvm that too much purple
no?
[IC] GMK Dragon Witch | GB DATE CONFIRMED!
just let me be
dark dark pink is like
dark magenta
and technically
magenta is a type of red
you fool
but red is just dark pink
did u not just read what i said
dam crazy novelties again
lmao
sigh
maybe ill just become a gmk novelties colelctor
and if i collect enough ill use novelties as keycaps
koi spacebar babyyyyyyyyy
grey is just light black, or dark white depending on the moon cycle
still missing that set of high quality amazon keycaps damnit
once you buy enough sets you realize that most artisans and novelties actually make the set worse
honestly, i never cared for novelties, i usually prefer the very simplistic stuff like this
you must be fun at parties 
nah jk wob goated
no. i do be weird
Ah, well, you see, in the intricate and convoluted realm of color theory, there exists a peculiar notion that black is merely the absence of color, or rather, the absence of light. But let us delve deeper into the labyrinth of chromatic musings to uncover the truth that has been obscured by the shadows of conventional wisdom.
Now, picture this: within the vast expanse of darkness, there exists a kernel of potential, a minuscule spark yearning to break free from the shackles of obscurity. This spark, my dear interlocutor, is none other than white, stripped of its luminosity and shrouded in the cloak of shadow. Thus, black is not the absence of color, but rather, the culmination of all colors absorbed and muted by the omnipotent void.
Think of it like this: white is the canvas upon which the artist of the cosmos paints the vibrant tapestry of existence. Yet, when the artist lays down their brush and the gallery falls into silence, what remains is the canvas itself, devoid of color but brimming with the latent potential of creation.
Consider, if you will, a prism refracting the boundless spectrum of light into its constituent hues. In this metaphorical kaleidoscope of perception, white stands at the apex, the source from which all colors emanate. Yet, when the prism is shattered, when the colors are scattered to the winds, what remains but the absence of that radiant brilliance? Black, my friend, is the shattered prism, the fractured reflection of what once was.
In conclusion, my dear comrade in chromatic exploration, black is not merely the absence of color, but rather, the twilight realm where light and shadow intertwine in a mesmerizing pas de deux. It is the yin to white's yang, the darkness that gives depth to the light. So, the next time you gaze upon the enigmatic abyss of blackness, remember: it is not the end, but rather, the beginning of a journey into the depths of the unknown.
naah but haha, i tend to go pretty monochrome
yo could u find me one of those but like an amazon
Chat GPT looking ass
I aint reading all that. Congratulations, or sorry, depending on what happened.
Yeah I’m not reading that either sorry
Just made scrolling up more difficult NGL
euhm, probably just look for WOB with simple base
Blud doesn’t get it
dawg i am not payin attention to u
just search white on black keycaps and ull get tons
i dont get it either, since i dont read either
before you ask, no, none of them are high quality.
gyatt damnit
$260 tho ☠️
ur telling me there are zero high quality keycaps on amazon?
ok but do you perfer with legends or black without legends
just blackout
legends too big, what are you, blind?
with legends if possible
I'm thereabouts, I tried lighter keycaps but just didn't compute
Yes lol, amazon doesn't really sell any high end keyboard gear
Ok fine just blanks then lol
i fuck with big legends i cant lie
my faovrite set the " "
that's crazy - they forgot to print the legends
I kinda like em lol the font isn’t my absolute favorite
im not neccesarely going for dark colours, but i have a set of WOB and BOW, Cookies n Cream, which is kinda BOW with speckles. and BOG on the way
Kinda neat tho
oh, and getting X-ray when that releases
German manufacturer GMK is one of the premiere keycap makers in the industry. This white-on-black GMK keycap set gives you a chance to experience the company's premium build quality firsthand. Made in Germany using original Cherry tooling, the set comprises 140 ultra-thick, ultra-durable ABS keyc...
thats the only one??? that is unfortunate
Other than these cant really find anything reputable on there, just random brands, no names and clones
i hate shine on black keycaps
i love gmk shine
but i hate it when its on black
no idea why
based
nice, would love to see more speckles in caps, pretty sure GMK is working on one; space something something
anything here really. Drop is good
GMK Cosmos
noicee
https://geekhack.org/index.php?topic=122582.0 Its taking forever
[IC] GMK Cosmos
yeah, i didnt really have any interest in those before, but i just saw that set when it was in stock, so i tought. might as well get it
GMK cosmos about to be fire with the 80he Ghost Case
ooh shit, thats crazy. its black with like, irridescant text
ik drop is great but i got an amazon giftcard that im tryna use on a leycaps set which is why im tryna find em on amazon
and that enter and esc key
Is that just BOB?
thatys why I linked the drop storefront on amazon for you lol
i may be stupid
no
simmilar, but
"The base is black and the legends provide subtle hints of multicolor that become visible when viewed under specific lighting conditions for an overall minimal and dark aesthetic."
Colors: CR base. Multicolor "liquid black" for the legends (referred to as M-LB going forward).
Legends won't be super visible. That is by design. I like black sets and it's about the details here. Less is more.
Get good (coming from someone who is looking down as I type this).
this set tells you to git gud. Instant buy. Unreal.
i kind dont want to get GMK, since i think its kinda too expensive for keycaps, but damn is this sexy
i use my keyboard all day every day. If I use a gmk set for like half a year that's basically a dollar a day. Worth it
i already wanted the stealthy look with PBTfans BOG, but that is still a lot more legible
just wait for that 1 keycap set thats your thing
that once in a lifetime
set
maybe your fav anime or
i mean, true. but what if you have 3 other keycaps sets at home, and have 3 others coming soon, and still have more in my sights
🤔
How do you know how many sets I own
dangerous statement to make in the internet
hmmm. im in your walls
https://kbdfans.com/products/pbtfans-x-ray
This is the set I am most excited for this year.
X-ray Keycaps A translucent minimal keycap setinspired by transparent tech accessories. Available as an in-stock drop Q2 2024. Scroll down to learn more, and fill out the interest check form to leave feedback as we finalize the design. X-ray Keycaps – Overview X-ray is a keycap set that features a clear-on-white, low-c
oh yep, thats on my coming soon list
Thockfather saw them in person and he said it's a must buy, attention to detail is unreal
what case with these though, you would have to do transparent arcylic right?
Thats what I am doing. Tofu Acrylic
green check is have, gray is ordered
see, but all that money on these, could have been a few GMKs. One day you will see a GMK you cant refuse and it's all downhill from there lmao
im doing it with Mode SixtyFive which i got with PC bottom
it makes sense when most of their keycaps are wob bow
it doesnt make sense to gmk when you only do wob or bow
yeah, PBNTfans isnt the cheapest, but its not GMK amounts, but aaaaaaaaaaaaaaaaaaaaaaaaaah
Mode is based. I really want a Sonnet for Redacted. But I just feel like I can't invest in non HE now.
GMK has a lot of really good "mostly" BoW/WoB sets
tbf, i only got BOW as a kinda temporary one, but ive been using it on my main board for a while now
but as far as themes and colors go, GMK is unbeat, so if a theme really appeals to you., once they are on it, it's game over for your wallet
I was a WoB only guy until I saw GMK Pharaoh because I am obssessed with ancient egypt
HE for gaming, others for typing i guess. altough i fear i might just keep my wooting on my desk 24/7 lol
I just take the gamble on sales these days, If I misss out then so be it. Crazy overpriced imo
wtf.
That's what I do. I rather get used to one keyboard. I swap my wootings around for aesthetics. lol
I understand it's not everyones taste, but when I look at this keyboard, the money is worth it for me.
this is kinda what im rocking still, only is BOW not cookies n cream now
My most heavily used set, already got shine a few months in
I think cookies n cream would look really good on Raw 80he
the omnitype happy hour is truly goated. Waiting on duel shock sale lmao
thats also why im kinda scared to go for GMK, im kinda a PBT simp now, even tho half of the sets on my list are ABS lol
im actually going kabuki-cho on Raw 80HE
PBT shines too.
oh wow they match
yeah, but i prefer the feel for gaming
fair
GMK does make PBT
but it's nto cherry profile sadly
so i would use PBT for gaming, and ABS for typing, which is a lot less used
it works
Initially I got it thinking it would match the alumaze accent, it kinda did but I hated the alumaze
lmao, thats kinda unfortunate
i would just get a black redux for that then tbh
nah its staying in the stock case, I unironically love it and think its great.
I have other wooting builds for other purposes.
i actually did quite like that stock case too, but i just wanted to get the redux for aesthetics and it does sound better
Using a black plate instead of white now so it looks even better.
Yeah for sure
i mean, i did match mine with mouse
nice yeah looks good. love the black plate. 
that's what's up
Stop copying me 
\
I am not a huge fan of how it sounds, but it looks really good. Keeping the case until a better case comes in blue. Lowkey waiting for Klippe T to be in stock in ultramarine.

yoo what iems?
sennheiser ie200. grossly overpriced but sound good imo
but yeah sooo, thats my second setup. here is the original plans.
but ive not got BOG yet, altough i think where i ordered a set might be a scam actually, so hey, might be a while
anyways, imma go now. since its nearly 5AM, and i still need to sleep before i go to work lol
aiite sleep tight 😴
Yeah but the MTNU profile is actually really really nice.
I haven't tried it so can't say. I do wanna try it though, waiting for the right set to come along.
what are these?
look really nice.
also anyone know a good spot to grab some keycaps for 60he
GMK Cosmos
thanks
isnt leafspring (just in general, not the salvation)
just superior to gasket becuase it supports the entire assembly isntead of attempts to support everything form the side like a trampoline
anybody got a video for building it with the tofu redux?
Yea i can grab it
thx
So KBDfans is dropping the Tofu Redux and Wooting fans everywhere once again have an affordable aftermarket case option. Also checking out the new Gateron KS-20 Orange Hall Effect Switches.
👇 PULL IT DOWN FOR THE GOOD STUFF 👇
✅TOFU60 REDUX CASE (SHIPPING IN SEPTEMBER) - https://kbdfans.com/r?id=io0457
✅WOOTING WRIST REST - https://wooting.io/...
It's not a matter of support, it's how much contact the mounting system has with the PCB directly. Every mounting point that touches the PCB changes the sound or creates dead spots of sound. Gasket mount prevents that and gives you an even sound
If it was me sound is just a personal preference
its like running Wooting steel plates and the prebuilt poron foam + L45's
and tofu case
my favorite thing about gasket mount is that they keyboard feels consistent comaprd to top mount.
With top mounts different spots on the keyboard feel different
And hell it sounds hella nice and there is no difference in bottoming
As compared to polycarbo
Yep it's all preference and while things like gasket mount has distinct advantages, some people may prefer the colored sound that you get with tray or direct mounting options
Btw what screws for the M2*5x6mm would u recommend
a hex nut or a normal philip flat head or those button headed ones
For the head clearence when you screw into your board
Anything will work but if you want to be fancy, get some nylon screws
ok ty just checking
I always assumed gasket would be more inconsistent because the center of the board has less supprt than the sides
But it kind if makes sense even with leaf spring, every contact point is going to create variation
Wow i literally own nylon screws but never thought of using them on keyboard
Im a dunce
For the burger mount?
I was gonna get the titianium hex nut bolt head for the M2*5x6
But i realized a better option is to just get a carbon steel one O and differnet screws can give off different sounds considering the fact of the shockwaves but it varies
Nylon screws because we would want the screws to get damaged first rather than the case standoffs I suppose?
I dont know how easy nylon screws would strip 😂
Is it safe to order cheap jade switches from Aliexpress? Will i get the real one?
https://www.aliexpress.com/item/1005006738645806.html these are real
I was sleep, but what Fenix said.
Did you buy from this store?
yes
Oh nice so how about packaging?
was normal nothing to say about it
I mean, is it in plastic bag or something?
I really don't remember, showed up how switches normally show up.
Ok nvm thx for answer
ive ordered from ali, from gateron and from other keyboard stores and all their packaging blends together. All of them have been fine, no one has pckaged anything poorly.
So I wouldn't worry about it.
I'm worried they might send me a defective switch keyboard, so I'm asking just to be sure. XD
Highly unlikely, but if it does happen, aliexpress has your back, I wouldn't sweat it.
i lubed my switches like a month ago but now i feel like the lube is gone do i need to put more lube on? or whats the issue here
can you take out the stabs on the wooting60HE?
yes
do you have a video on how to do it ?
do have a switch puller?
yes i do
what do i do with the switch puller?
pull out the switch first
i did thta
u have tweezers right?
yes
if u look at the bottom of the stabs there is a little clip
yea i see it
just push it in
np
after u pushed in that clip all the way u can lift one side up
and then u just do the same on the other side
yea i just pulled it put thanks
no problem
(:
I decided to get a tofu and just to check it only has 2 screws and not 5 like stock right?
Why? You risk snapping the PCB if you carry the keyboard vertically or upside down
At least put the screw next to the space bar
Because I dont like how stiff it gets if you use all the stand offs. The spacebar one is the worst one in terms of spacebar sound and feel. I dont carry my board anywhere so I don't see it being an issue
As long as the keyboard is always horizontal, that's fine. Burger mount?
Yes, it's burgermounted. But still - the weight of the PCB+plate etc is not that heavy. I don't see it snapping because its attached to 2 scews if you carry it
Are there any reports of that happening to people?
The only way I could see that happening is if the board gets hit really hard somewhere without a stand off to support it
or like squeezed between something
If you turn the keyboard upside down, the weight of pcb switches and keycaps induces horizontal tension below an imaginary horizontal line between both screws
I see what you are saying but that whole assembly is not that heavy. Unless you use keycaps made of stone lol. Also the keyboard is short so the distance between those 2 screws are not that long
you might as well use gummy o mount then
that is way too much stress on 2 screws
maybe use screws that will give?
use nylon screws that will snap
if you are going to take so much risk
reminder that the screws screw into the PCB
not your plate
so youre litearlly stressing the wooting pcb
stressing plate is kind of less risky but then agian why would you do that
I used 4 in my redux, the 2 mentioned, and the 2 others on sides. Didnt use the spacebar one
it has all 6
2 left, 1 center, one near spacebear, 2 right
if you dont see all 6, look for standoffs to screw in, from your packaging
Wont snap
Only 1 of those is compatible with wooting PCB
The only thing would snap is if u managed to hard throw
I might but not going to because I'm not using my redux. I've never heard that being an issue. I know there's several in here doing 2 screws
Oh, it didnt reply to the message, but only 1 of the standoffs is compatible. And then the 4 other ones
lol I’ve used two screws on plenty of my boards with no issues guys
It legit wont snap its screws and the design is legit not flimsy
Sounds like people are using their board as a pingpong racket not a keyboard
Yeah, thats why i got 2. So i can ping pong with friends
And even the Salvation is designed with only two screws really, depends on your PCB as well
It has the option for 4
4
The wooting wont give way
Most only use two
Even with 2 as a ping pong racket
i did all 4 on the sides
I did 5
I used two screws on my old ducky one 2 mini and that one I hit so many times right across the middle. No snapping
salvation has 5?
Cant wait for the 80HE, will be so much easier with a bigger racket
No
im refering to salvation btw
Salvation only has 4
yeah
And you really only need 2
thats all i got
I thpught the 2he is the competitor
To the 80
Hmmmm. Probably yea
Cardboard80HE
Including the space bar
CardboardHE
Lightweight racket. I see potential
Nah bro we going full metal year
Swinging that zinc alloy might be tricky
Gear*
Zinc alloy is lighter than steel if im not wrong by 2kg
Or 800g
Idk. But it will be the most dense board i will have
Smh wooting, not giving me a tungsten case
Is ok wait till u get the cardboard wooting with the water proof coating
And a hard slim resin coating
U wont suffer
Don't let your dreams be dreams
when the files are out you can contact a manu and have tungsten one made
Yeah, let your dreams be memes
LOOL
"It's gonna snap" - yeah obviously
I'm 0 screw gang
U know what fk this ima use the default case on the prebuilt no screws
And just duct tape
No ones gonna stop me
Wait
@elfin garnet i got the most cursed idea
Ever
Noodle case
Fucking using packet noodles to make a case
That shit wld be so fucking cursed
yeah glass noodles at that for better RGB lol
Honestly
I just tell my keyboard to stay and she listens
what are screws?
All these cheap NK and Omnitype GMK sets are making me go broke... Ive got to hide the credit card bill from the gf
Olive is such a nice set though
Thought about olive too many times but never have a case I would put it on
Ive yet to build my Clay Derivative so Im thinking Olive might be where it's at. Although I did almost cave and buy this set yesterday when I placed my Geon order - https://geon.works/products/key-kobo-alhambra
Bro forreal
The key kobo stuff has been really impressive lately
How was that key kobo set you put on the Rose60?
Really really nice for the price
Awesome
Anyone know any Canadian keyboard retailers selling stem spacers? Don't really feel like paying 28 usd shipping on a 5 dollar cad set of foam spacers
Perfect for the frog
Aliexpress is the move
is this what the stem spacers would be used for?
i was going to get jades, so should i get some then?
Depends on what keycaps, but unlikely.
The vast vast majority of us use jades with no issues.
Its only an issue in some rare cases, usually with cheap keycaps.
oh alright
what type of keycaps would you recommend
ill be using tofu60 with jades
i don't use them, but i'm actually thinking about to buy a pack and see what it's about
if anyone could send an aliexpress link for the stem spacers i’d appreciate it, i looked a bit and couldnt find for some reason
What are you using atm, lekkers?
i mean i'm low on L60's anyway
I use stem spacers on my stab keys with jades
yep, hand lubed L60's
imma get the stem spacers just incase
any1 know where i can get some nice mute vol down and vol up keys?
anyone able to find an aliexpress link for stem spacers? lmk
Damn bro got the Pearl Ghost Cable
From where
WiredIn
Wow bro I'ma get one cuz my setup all white
Oh damn bro the stormtrooper one really the one damn Fam thx
Im waiting till wooting releases a full white cable. Coming soon. Hopefully

Black and white cables coming with the 80he
That's alr ig I just won't be able to do a burger mount
Not enough o rings there so damn easy to lose
Came with 20 and I have like 6 left
hi guys, just wondering should I use the middle screw on my 60he+ module with alumaze case? If no, can anybody explain why pleaseeee
I wouldnt recommend using the center screw location
again, I wouldnt recommend using the center screw location
why is that? I am just curious
it overall just makes the keyboard stiffer and makes the sound worse
there are sorta dead spots around screws where the keyboard sounds different
makes sense, thanks dude 🙂
im on gummy o im just letting them know the spec of tofu
i dont think ill ever tray mount ever
how much bewtter is that on a scale of 1-10 and what gummy can I get? Do you have a link for this?
you need to find 35A gummy o ring to fit the wooting
this is where i got mine but you can get it elsewhere
Me thinking that it was for IEMS
hopefully there will be 80he comptability list just like for the 60%
but my hopes are kind of low because their gasket system might be propritary or something
might get the module for fun
every time i see those connectors i feel poor
i just know its 100 dollars every time i see that connector
wait its kind of cheap to build your own
no massive markup
from their site
Yeah he has DIY KITS
i recognize them cause of the gmk nerve cable
does this work with 60HE+? or do I need the 30A?
guys 35a for wooting right?
idk been a while not sure if memory reliable
can someone confirm
just asking cuz I saw this https://www.reddit.com/r/WootingKB/comments/1ackpuo/is_60he_module_copatible_with_oring_mount/
between 30-50 is reccomended hardness
Anything between 30 - 50A is recommended but everything up to 70A have been proved to work
Also have to keep in mind if you’re using screw in stabs or clip in, plate mount stabs
so will this be okay with the screw in stabs?
how about the size
yo does anyone have an aliexpress link for stem spacers?
Yeah it’s recommended to get a small size o ring with screw in stabs, but some people have gotten them to work with medium size o ring , also depends on which case you’re using
Another option is to just swap out the backspace and spacebar stabs with clip in or plate mount and then you can still use medium size o ring
The only person who made it work with screw-in stabs and a medium o-ring ended up putting the o-ring behind the stabs. If you want to gummy mount I highly recommend clip-ins or plate mount stabs
Ah yeah that’s right
oh, slow response, but i know, i want the white coiled cable when that comes tho
- epic keyboard
that's actually reasonable compared to some of the builds on here lmao
got a 800 euro kayboard that i dont use because of wooting xd
uhhh
true
just turned 16.
got a job so i can afford it now. been wanting a custom build for 3 yrs
wich switches did you endup buying ?
im assuming tofu redux ? with the 60 he module ?
jade
nice are you gonna lube them ?
nice bro hope you like the process and share your final build
i will for sure
i was wanting to get a coiled cable as well, but i heard that it could cause under voltage with the wooting.
would i still be able to get one without causing that or nah
just has to be a high quality one
like from wooting themselves
or wiredin
some random $30 one wont work
gotcha
ill get one of those once i gather some more cash
hope this build goes well though
cheap ones can work, just not 100% RGB with tachyon mode
what does tachyon do?
You can miss your combos twice as fast 
lol
the keycap set i grabbed was 50% off, looks pretty clean tbh
a lot was OOS or $100, the budget went over
That profile looks painful to type on lol
To each their own ig I have always been more of a cherry profile guy
Ironically my favorite profile is whatever the hell is on a macbook air, but on a "real" keyboard, go cherry or go bust.
yeah probably why it was 50% off lmao
but i already own basic black cherry keycaps.
so if i cant deal with the feel of those, ill swap to the black until i order more
what would you put them on
I have nothing to put them on, that's why I haven't bought them yet.
They would look goated on a green frog mini but those are impossible to find now.
spray paint a silver one lol
ah
what do you use currently?
Depends on my mood.
Mostly the stock plastic case because I uniornically think its the best case.
shame it's tray mounted but it is what it is.
something rubs me the wrong way about buying an expensive case and then spray painting it
Cerakote perhaps
me 2 but I would make someone who knows what they are doing do it tho
got my render for my frog mini plate by tom earlier
https://geekhack.org/index.php?topic=121676.0
Damn, lotta cool purple ic on geek hack lately
【IC】Key Kobo-Helleborus |Christmas Roses blooming in the dark night
what keycaps you throwing on your frog mini?
gmk november fog for now
Silver frog, ye? that would look good
do you have another one in mind down the line for keycaps?
yeah its silver
I really want the cosmos keycaps whenever they come out. That's when I consider spraypainting the case. I bought a white and black plate so I can go either dark og light build
yeah I also make sure I have one of each plate. Will be using white plate for the xray set.
That Cosmos looks sick, i want it to enter GB already
i hate waiting 
yeah im waiting for those as well so might try that as well
^^^they look so gooooood
yeah cosmos is my number 1 prio right now
100%
I really think xray + white plate + tofu acrylic is gonna be insane
https://geekhack.org/index.php?topic=122302.0
This is more niche, but this and Cosmos are the GBs am looking forward to the most. Not sure any others I will be committing to so far for this year.
[IC] SL Cipher (Morse & Radio Alphabet) | Artisan Collab
I built a tofu acrylic with my standard 60HE that I gave away and I really liked it. Might grab another one just to build one with the xrays
I'll be sure to show you what it looks like when I get the keycaps
yeah I saw these. They look good imo
I think these would look really good on the ghost PCR case.
And am putting redacted on the white zinc.
most likely will yeah
that is gonna look so good
I love redacted, been holding on to a set for months waiting for the right board lol
Just a few more months haha
I feel for yall, life is easy when you are an ansi user. I don't have to struggle like you do.
yeah I have payed way too much for stuff u guys get easily
Although I will say I want a good set with Arabic sublegends but thats impossible to find.
I'm in Canada, no the US, so I still pay a premium on most things sadly
But at least its almost all easily available
oh ye I bet
I saw one I liked but I cant remember the name
https://mekibo.com/en-ca/products/gmk-green-arabic
This is the only one I know, but I really don't like the theme.
Buy Deskmats here. Buy Salvun artisan here. Disclaimer Please read our REFUND POLICY before making a purchase. Renders are for illustration purpose only. Final products may show differences. Keyboards are not included with the purchase of keycaps. Introduction Designed by SMOKEY, the designer of Taegeukgi! Specificatio
this I think
yeah thats the one
grey white and green sublegend is just too hard of a combo for me to make it work
most green cases in stock atm would clash a bit
once again wishing for a green frog mini
spray paint lol
real shame its only restocked in silver lol
but ye I feel u
i mean if they can spraypaint cars and make it look good and durable. A keyboard case must be light work
true
I picked up a set too. I want botanical desert base but that's because I already know how good it looks on the green frog, now I'll see how Olive looks. $90 for the base and novelties was a steal.
I'm excited to see it when you put it together, I think it's gonna be 🔥
It really is a steal.
GMK Wasabi is a really tame green set, have you seen it in person ?
I would highly recommend some pbtfans wob or wob crosshair (my fav)
Might try to rebuild the keyboard tonight with it
YOOOO
Maybe even get crazy and put together my M3K 
That's fucking hype
And new Saturn pro showed up fk
Is ergo build actually viable or is it just a talking point on reddit
Yeah dude that thing is nasty
that looks amazing
Like the mouse?
Am copping. Just need to find a case for it now lmao.
I almost bought it yesterday for my clay colored Derivative but I didn't. Still might, set looks sick
I didn't know you could build those ur gonna bankrupt zaunkoenig
I'll have to think about what Case to pair it with.
I’ve been thinking to build my wife a keyboard and this entire thing would be perfect for her. Inspirational.
It would look ok good on almost anything white, good, silver, brown, gray
I mean... 🔥
First thought was grey klippe t
If you get to it before me, I want pics.
do you know what case that is?
I'm thinking about a Copper Salvation now .... hmmm
Actually maybe not, I forgot it has a texture
no idea. prolly would look good in this:
I dont know if anyone here owns it, wonder what it's like in person
Would look great on that too. Even (and hear me out) the mocha Tofu
@pastel vigil - this is the case:
#haven #atelier #weswtch
Build stream: N/A
Spec:
- Keyboard: Haven TKL (HE - Gray Copper + Bronze PVD SS + Bronze Highlight ) by Atelier Haven
- Mount: Gasket mount
- PCB: 1.2mm hotswap, flex - cut
- Switch: Gateron Minks
- Lube: Krytox 205g0 || Tx 55L springs lubed w/ Krytox 105
- Film: Deskey
- Plate: FR4
- Stabilizers: Tx AP lubed w/ Kryto...
It would. But I don't want to get another tofu. Althought this would be metal and not acrylic ... hmmm
TKL 
yup...
Yeah I've got this guy which would go great
That'd be sick actually
which case is that?
would def be banging
Clay color https://jjwkb.com/products/derivative-r1
Details Kit includes keyboard, aluminum full plate, PCB + Daughterboard, carrying case & microfiber cloth, 50A O-ring, assembly hardware, misc. documentation. HHKB layout kits include 2 o-ring standoffs and mounting hardware. Kit does not include keycaps, switches, or stabilizers. Note - while A stock Blackout kit
beautiful case
That kilmat is fking dense
Jeeeze
In other exciting news I switch from stock PTFE used/venus to tiger ice v2/saturn pro and it’s a completely different feeling
Excited to try it
Will wait to swap out the kilmat lol
what pad do you prefer? i have saturn, but i do sometimes want to try a faster pad
I also have a saturn, I feel like it's plenty fast, crazy there is faster lol
I dont play on low sens though
It’s so different dude haha
Crazy
I would say biggest difference between Venus and Saturn is hybrid vs cloth, respectively
They just feel totally different
The pro’s base is crazy sticky
I'm not competitive so I don't see myself trying out new pads until mine is dust
hell I wont even try skates lmao
I'm too OCD to go down that rabbit hole. What I dont know cant hurt me.
haha fair enough, i am using Xraypad Jades skates rn, so i am kinda a tryhard lol
anyone using something other then stock skates is a little bit of a tryhard
yeah, but how are you gonna show your friend that you are a pro gamer if you cant beat them
By doing PvE content they can't do 
hmmm, weird
I mean... i don't want to say it was just the mousepad but:
😆
we won
saturn pro W certified
just casual btw x.x
yeah, its just the base pretty much
I have the Venus noob
and as long as you dont have issues with sliding
It’s glued
But with no friction
Tiger ice v2/saturn pro v nice control combo
IMO
But yeah prob any Saturn
yea
I had a cheap Amazon cloth pad before and there was way too much static friction
Cloth is kinda cool tho
I do love the hybrid texture tho
cloth is pretty good, but i do want to try hybrid texture sometimes
wow, bro clicked the link 
Haha I’m friends with that bot 
but yeah no i'm not good but just funny
new mousepad buff x.x
lol it's a steam friend bot that tracks games for stats
yeah, i figured lol
but bro i hate premier
just had 2 people team kill everyone then back out
lost my first 7 in a row games trying to play premier. 3 of them with leavers
honestly, shouldve just played better and won
dont blame teammates, thats a bad habit
just do better
if your team cant get kills, then you should just get all the kills on your own
There awesome aren't they
yeah that's on me
In valorant it's 100% a team game tho it doesn't matter if your the best in the world if you're team is bad your losing
ok, but have you considered. just getting even better and carrying
Should work fine
man just played my first Faceit CS2 game and that was 10x any of my premier experiences
that's crazy
yes they are clean
might get them honestly, after a while of using mine
@stray tiger if i was to use the Sticky Rice Switches and i use max 2.5 actuation point or less is the sensory overload still going to be issue for me or no?
Is there a reason you won't just get another HE switch that doesn't have issues?
I'll try and knock out analog testing tomorrow, work has been crazy this week. But the issues fo beyond just the magnet overloading the switch or maxing out early. We also saw odd behavior such as the switch causing actuations without even touching it.
okey thx a lot and you dont need to rush it i was just curious
yeah the random actuation is primarily why I would be avoiding that switch for the time being.
I use the Wallhack SP-04 Glass Pad
With their UMW material skates
The even vague questions about the integrity of its performance would make me avoid it
Why risk a dysfunctional or troublesome mediocre switch
My feedback on the skypad v4 is that its incredible


