🔧│keyboard_modding

[empty sinew]

bassically the hall effect sensor should detect the strength of magnetic field and then can produce digital\analog signal afaik

simply put

[untold wigeon]

i want my ANSI

🥳🥳🤓

[empty sinew]

got my Tofu at before 20 min lol

sent yesterday from Sweden jezus

[austere creek]

ive extensively explained your flawed logic. if you do not want to listen and wanna stay set in your flawed way of thinking thats for you decide. i wont explain it over and over just for you to reply with more flawed statements

[untold wigeon]

liiit

i get mine tmr

[grim steppe]

Why so toxic?🤔

[untold wigeon]

prolly get module in 2 weeks or sum shit

[untold wigeon]

how’s that toxic?😄

[grim steppe]

Maybe I just misunderstood. Never mind😌

[untold wigeon]

yea prolly

[river socket]

How can i TaKe them apart?

They are stuck together

[empty sinew]

rip 🙂

[glacial wind]

you just grab each and roll them - comes undone pretty easily

don't pull but basically roll them so they unwind from each other eventually

oh calslock beat me to it in under channel

[river socket]

np thanks for the help

[verbal knoll]

can someone explain to me why my 3mm o-rings did nothing to reduce the travel-distance of my keys?

it just lifted the actual button higher but the traveltime is basically the same

how in the world am I supposed to reduce the travel distance if I can't do it with o-rings?

[austere creek]

how did you put on the orings

[verbal knoll]

on the keycap stem

[austere creek]

should work if they arent too thin

most people ive seen stick ceramic beads under the keycaps

[verbal knoll]

this is 1x 1.5mm ring

I put 2 of those on

the key should be reduced from 3.5mm to 0.5mm

but it's still 3.5mm

the button is just taller

I really don't get it

see how elevated the W is in comparison to Q and E

[river socket]

Some of my switch covers dont work is there Any fixes?

Like it doesnt let me press the switch down its just rock Sokos

Solid

[stray tiger]

You put the switch together wrong. Turn the top housing around

[river socket]

And one of the clips is a little bit over than the other onks

[stray tiger]

You can assemble the switch two ways but it only works one way. Rotate the top 180 and put it back together.

[river socket]

Its working now thx

I was about to lube my switches i lubed a few but it sounded the same

[wet hazel]

For me the O-Rings only mutted the sound and added kinda mushy-weight feel to the keypress

[verbal knoll]

right. same for me man. why is this different than mechanical switches?

if you put o-rings on them you reduce the travel

but not on magnetic switches

I'm confused

[somber drum]

guys what formation should i put my case foam inside, spongy rough side or smooth side?

i feel like spongy rough side made my kb sound and feel better, smooth side was a little bit deeper i think or i maybe be tripping, although feel was nowhere nicer

[empty sinew]

can check diff on my video: https://discordapp.com/channels/167181566978555904/984799440072220692/1211663995858194472

[untold wigeon]

Finally got all parts and assembling: HE60+ module Tofu redux dark purple with jade switches and steelseries prism caps (reusing from old keyboard)

No physical issues with stock stabs with this setup so far (information i was looking for myself)

[empty sinew]

hows the spacebar level given that you using both optional standoffs?

[untold wigeon]

Can you specify the question im new, do you mean the height compared to the case rim?

[river socket]

Which one should i Use poron foam or silicone

[empty sinew]

example

had this issues with mine, but fixed it with removing the bottom right standoff

[untold wigeon]

Hope this helps but looks level to me maybe with LEDs it will be more apparent

Pushing with «full force»

[wet hazel]

With Jades I have that problem if I push one side of the spacebar with force

But when I'm typing doesn't occur

[untold wigeon]

Maybe the caps themselves are a factor too idk but im happy with the level and that they dont get stuck as ive also seen

[empty sinew]

nah with me was the PCB

[untold wigeon]

did u get redux

lolhero

[empty sinew]

ye

its in my home 😄 but I am stuck in work office

going to check it once I get home

[untold wigeon]

nice

when u home blud

[empty sinew]

like 16-17cet

[untold wigeon]

kk

[river socket]

Which one should i Use poron foam or silicone under the pc plate

[empty sinew]

I like the poron more

[untold wigeon]

Finished with full 100% white lights. Slightly tinted because of switches i assume and for some unkown reason space is tinted pink

[empty sinew]

Mine are tinted bit reddish

[untold wigeon]

the space bar only or do you use raptor switches?

[untold wigeon]

he use l45

[harsh dove]

My spacebar led is pink too when I use white

[wet hazel]

Jades alter the colour, but pink(?) my white was blueish-greenish

[harsh dove]

Was on my regular 60HE, my module is fine

Also lil fun fact, RGB LEDs can’t do white

[old swallow]

wait wait wait, let me guess what colours they can do

hmmmmmmmmmmmmmmm

[wet hazel]

https://tenor.com/view/rgb-hair-meme-rgb-hair-fgb-fade-haircut-gamer-haircut-led-light-haircut-gif-26124904

[sweet oak]

2077 cut

[median spade]

Taking this to my barber

[empty sinew]

All of them and I use lekkers.

And yeah as said by CAM the white leds are a bit of a no go. I tried something like 230 255 255 to get a bit less reddish

Its here bois

[median spade]

Did you get weight too

[empty sinew]

Ye

[old swallow]

ngl, weight with acrylic kinda weird

[empty sinew]

You out the pads in anyway

[median spade]

Not weird at all

Adds more weight to board and changes sound profile

[old swallow]

ive got the weight aswell, but you can see it with the acrylic, so you know

but its actually pretty cool

[empty sinew]

For mounting the module, did you have to use any standoffs?

[old swallow]

you can do the spacebar one, but you dont need to

most people prefer the sound without it

[empty sinew]

And did you add the stickers that come sith tofu?

Theres some black stickers

I think its for the additional standofs

On edges

Not the screw mounts

[old swallow]

i didnt, not sure about others

[soft pawn]

I’ve just tried screw in tx ap stabs on module space bar feels mushy ?

[empty sinew]

which ones did you get?

[median spade]

Yeah because tolerances are really tight

So if the plate plus stab combo is too tight it will be mushy and slow to return

[soft pawn]

Ah right I got 1.6 normal

So u have to sand the plate then

[river socket]

Can you Use electric tape on pcb

[agile grove]

you can but you shouldnt

electrical tape is wayyyyy too sticky

[river socket]

Ok is painters tape the only one?

[peak oasis]

i dont recommand its gonna make contact with some parts you wont

Can I put silicone in my case without risking breaking the PCB? with Electrosatic ( ESD ) or shit like that ..

[agile grove]

painters/masking tape and moleskin I guess

[shell crown]

What for?

[peak oasis]

?

[agile grove]

does anyone know if theres a publicly available tofu redux 3d model?

[shell crown]

What do you want to put it for?

[stray tiger]

Keep the silicone layer below the height of the standoffs by at least 1mm and you should be ok

[median spade]

There is not

Could always ask Wei from kbdfans himself but that’s about it

[stray tiger]

Im going to re-record the switch test video. Watched last nights stream and camera focus was locked and the 3rd microphone has some noise filters on that shouldnt have been there.

[untold wigeon]

i was gonna say this but i didnt knew for certain when i watched vid this morning

[stray tiger]

Which part, the mic or the focus?

[untold wigeon]

focus

😄

[stray tiger]

Yeah, camera #3 which is the side view camera had autofocus turned off lol

[untold wigeon]

ah, tbh raptors with stem swap sounded the lowest out of the pack

but if u dont want to mod/change switches i feel like ks-20u is the best alternative

for thock

[stray tiger]

That was my conclusion. The stem swapped ones suprised me for real

[untold wigeon]

sounded great

but for a noob like me i cba doin a steam swap so ill go with the ks-20’s

[stray tiger]

When i redo the video Im going to use a 100% stock new out of the box 60HE+ so thats its more relevant of a test

[untold wigeon]

yeah fair

prolly have to watch it tomorrow morning😄

[stray tiger]

Might record it tonight but wont stream it, so Ill have to edit and upload Im guessing. We will see. I wasnt impressed with multi-streaming last night, I might just go 100% youtube for now and stream at 4k instead of trying to do 1440p youtube and 1080p twitch

[static tendon]

@harsh dove not sure if you’re currently on but do you tighten the screws all the way down when screwing in the PCB to salvation case? I feel like if I tighten it somewhat snug, it removes a lot of the bounce

[stray tiger]

Im not Cam (he has more hair than me) but Id tighten them just enough to be snug

[untold wigeon]

ah okay

[static tendon]

Sounds good. I have gotten the screws to be just snug enough to not decrease too much bounce from the leaf springs

[static tendon]

Sounds good. I did just about that yesterday. Helped improve the bouncy feel a little more

I’ve seen some people off YouTube make the salvation bounce like crazy using a full plate, not half plate and not plate-less but they were using regular PCBs not Hall effect ones

[soft epoch]

thats awesome to hear

these jades are awesome!
much better than the ks-20 (which I had filmed and lubed)
these are awesome as they are, idk if I wanna bother filming these or lubing them

[thick mural]

i think it's because the stem is so tight theres no air pockets

it traps a lot of the high pitch sounds

sounds really good

[cyan adder]

Any sound test ?

[agile grove]

just dont mind the giant hole in the bottom of the switch

[thick mural]

that gets absorbed by the case and foam

any rebound sound wouldn't

id assume that's what gives the jades such a different sound profile

[soft epoch]

dont rlly have a good setup for that, sorry. otherways I defo would have done a comparison test between them.
The KS-20 is slightly more silent than the Jades, but also has a higher frequency.
the Jades is very thocky''

the stabs is noticably too long for these switches. So I will have to switch those out.
not a problem with the spacebar, but I do feel it with the shift key

[polar girder]

Can’t wait to rebuild keyboard once my brass plate gets here

Joy

Probably not touch it for a while after that

Swap to module

Sell the stock 60HE

Woohoo

[stray tiger]

Trying out brass? Youll have to let us know how it sounds. I ordered a PP plate that should be here Friday if it ships on time

[polar girder]

“Jades is very thocky” that’s first time I’ve ever heard that

[polar girder]

Yes sir

Nice

[sharp yew]

counterpoint

https://tenor.com/view/undertale-asriel-asriel-dreemurr-hair-cut-fade-gif-20015484

[harsh dove]

Yeah I would have to disagree

[harsh dove]

Jades sound different because they have a closed bottom

On regular HE switches there’s no bottom out sound

All you’re hearing is the upstroke sound of the stem coming back up and hitting the top housing

[thick mural]

raptors with the lekker stem sound significantly deeper

compared to the normal raptors

[stray tiger]

They do and I was surprised by that

[empty sinew]

Idk why thouh since stem looks very similair

Could be a lube job?

[harsh dove]

Yeah they’re quieter than the rest and I think that also makes them sound somewhat deeper

Stock raptors don’t sound deep at all

KS20u is probably the deepest to me in terms of stock switches

[polar girder]

Jades are very clean and crisp. But not very deep.

Yeah the muted and low sound of the stem swapped raptors I really like

Staying with those for now

[wet hazel]

Yeah, the closed bottom hits very clacky

At least compared to the L45 lubbed that I had before

[stray tiger]

Yeah I think thats pretty clear in the video I made yesterday but I plan to do it again with some better explanations and on a stock board

[polar girder]

Yeah the l45 spring and stem in the raptor housing I like quite a bit

[harsh dove]

Yeah I really like jades but the raptor hybrids are nice if you manage to not get the friction feel

[stray tiger]

I might go ahead and stem swap a bunch when my replacement switch opener comes. because Ive had those lekkers for almost 2 years, they are pretty broken in

[harsh dove]

Yeah definitely, I’m planning on stem swapping mine again and putting them in my alumaze x Olivia build

[polar girder]

Yeah I’ve only really noticed it on my backspace. But it’s gotten better over time. And hopefully can get rid of it when I swap to module and try other switch

[harsh dove]

Yeah I mean based on tirades experience, his l60s are very broken in so that should help with the friction feel

[peak oasis]

and if i put a layer of silicone and on this i put the layer of foam included in the wooting 60 , youy think it can be okey ?

[stray tiger]

No. I think you would need to do 1 or the other

[fallen crag]

Lubed my L60s to high heaven, and they feel pretty good, still thinking about ways to make them better

The fit could be tighter thou, but that brings more friction with it.. Wondering if its possible to create PTFE stems that sit tighter, but wont have the rubbing feel due to their low friction.
At least at an affordable/reasonable price that is.. .-.

[untold wigeon]

jades thocky? damn never heard anyone say that before

i mean bigsly already explained that it seems😄

[peak oasis]

why ? i think the layer included gonna protect no ??

[stray tiger]

Not sure what youre asking. You can do a silicone pour in the bottom or do the foam in the bottom but doing both is going to be hard. If you think it'll be great you should try it and report back.

[peak oasis]

i want do this

[stray tiger]

Do it

[peak oasis]

no probleme with electrostatic ?

[thick mural]

depends on the case

i have 2 sets of foam in my fjell

wooting foam and tofu foam

wootings foam is easy to compress

[wispy thistle]

anyone have a sound test with jades + alu case + pc plate + case foam.

[bleak steeple]

where can i find the video?

[stray tiger]

Pinned

[bleak steeple]

perfect thank you!

[harsh dove]

No case foam here but there is plate foam I believe

[wispy thistle]

ty! did you tape mod?

[harsh dove]

Moleskin

1 layer

[wispy thistle]

is that gummy o ring mounted?

[harsh dove]

No

Damn autocorrect

[wispy thistle]

lol no worries thanks

[harsh dove]

No probs

[wispy thistle]

I like it, not exactly what i was going for but I am not too picky 🙂 sounds good

[harsh dove]

That is a salvation case so it’ll sound different in something like an alumaze or tofu

[wispy thistle]

oh yea mine will be in a tofu alu with brass weight, and ill probably gummy o ring mount. so it will sound slightly diff or you think completely diff

[harsh dove]

Well..

Modded with everything you said but also has plate foam and I’m using carbon fiber plate here

[wispy thistle]

oh hell yea. that sounds amazing to me

maybe ill use the pe foam then

[harsh dove]

lol yeah

I actually like the tofu foam

Nothing wrong with wootings either

But I like the smoother tofu foam lol

[wispy thistle]

wait when you say plate foam that goes in between pcb and plate right?

[harsh dove]

Yessir

[wispy thistle]

i dont think i got a tofu plate foam

[harsh dove]

I don’t either

I’m referring to tofu case foam

[wispy thistle]

ohh gothca

yea i dont have the wooting case foam cus i only got the module

[lapis stump]

it should come with the module

its looks more porous

[wispy thistle]

oh yea im tripping its right here

thanks lol

so do i have to pull all the switches on before i do the tape mod?

[harsh dove]

No

Either way works

With switches on or off

[wispy thistle]

ok sweet thanks.

[fluid ravine]

MMMMMMM

tastes good

is that the peaches?

[harsh dove]

Nah Jades

Same video you seen before

Except I modified the spacebar

First one had a hollow spacebar

[uncut musk]

wasnt able to catch the stream the other day, when are they planning on putting the new wrist rest colors on sale

[agile grove]

never 😈

[uncut musk]

me as well, I like how its super smooth

[atomic basin]

guys im struggling

i need help finding a website for good keycaps lol

[stray tiger]

Whats your budget?

And where are you located?

[atomic basin]

ENDLESS BUDGET 👿

united states

[stray tiger]

https://matrixzj.github.io/docs/gmk-keycaps

[shrewd dragon]

same thing with about 100 euro budget but located in Germany but idk if you can help me with ISO and German layout as well

[stray tiger]

Cant help you there

[atomic basin]

actually one of the best custom dope looking keycaps

thanks bro

[loud zephyr]

Maybe this? https://oblotzky.industries/products/gmk-cyl-norde?variant=44609459847436

[polar girder]

man i've always really liked bordeaux

[stray tiger]

I've been trying the find sloth without luck for a year

[untold wigeon]

case foam or ? nvm gpt my answer

[kind helm]

any recommendation of switches for 60he? i did gummy oring + stab + cotton mod. i was like "ok its not bad" at first. 3 months later i switch back to my old keeb i am like "yea i am hecking lying to myself this whole time"

[quiet bay]

If you’re going for sound then I’d recommend jades, ks20u, or raptors with lekker stems

[kind helm]

🥲 anything that is not hybrid? my brain is already melting from all the work stuff

[quiet bay]

https://youtu.be/59byy865KnM?si=q94DMznY5YijRrZ4 somewhere here it should have some samples of sound tests

well raptors w/ lekker stems is the only one thats hybrid

Jades sound good stock idk about ks20u

[delicate crescent]

i got the 60he+ module, which comes with PC. but theres no where to also get the steel plate, is there? was wanting to experiment with that one as well

[kind helm]

still all on the high pitch side.. but i think that has to do with the mods he has. but yea jades sounds cleaner than lekker

[fluid ravine]

This sound test is based off from the pure sound of the switch fyi
All there is to Pop's board is just the default 60he with steel plate and gummy mount

nothing else

[kind helm]

yea that steel plate was probably the more important factor in terms of the pitch

[fluid ravine]

well at least you would know the sound difference of each switch in the same board

tech without any mods

OK i gtg sleep gn yall

[kind helm]

thank you guys btw

W suggestions

[quiet bay]

They dont sell steel plates separately, and I think you’re better off with something like an aluminum plate anyway

well really depends on what sound ur going for ig

[shrewd hatch]

Hey I've got some TX AP rev 4 stabs sitting here since I accidentally didn't get plate mount 😅

If anyone keen on paying shipping I'd be happy to send them. I'm in Australia so not too sure if would be even worth unless you're also in aus haha

Should work with the HE+ or module I think ^^

[vague socket]

Hi i got brand new lekker 45 switches that havent opened. My fren just gave me magnetic jades so if anyone wants to buy just dm me

[untold wigeon]

u could also just return

[wet hazel]

https://m.youtube.com/watch?v=6lp_kJNGPyI

[vague socket]

Ohh i can?

How?

[untold wigeon]

i mean if has gone less than 30 days u could just email support and ask for a return

[vague socket]

will i have to pay for shipping though

[untold wigeon]

no clue, ask support

[untold wigeon]

so u just one brass weight and only the tofu foam?

[empty sinew]

This is what I will also test brass weight and tofu foam + included stickers for standofs

[untold wigeon]

do u get orings with the tofu?

[empty sinew]

No but some stickers for additional standof points in cornerns

Tofu has some non screw points

[untold wigeon]

u have pictures of the stickers?

is it the same as you get with alumaze?

[empty sinew]

No

They are not circular shape

As the standofs are not circle

[untold wigeon]

oh

[empty sinew]

Its like a special shape

[untold wigeon]

hmm

guess ill have a look

[empty sinew]

Its for these

[untold wigeon]

yeah ill look im omw to pick mine up

[wind karma]

yo what..

how did you get it to sound like that?

[gaunt marten]

what are those stickers even for honestly, like do they change anything

[empty sinew]

most likely not, but they attach to the parts I shown on the pic above

probably to dumpen the sound a little

[gaunt marten]

yeah i was wondering what the fug theyre supposed to do lmao

[empty sinew]

same type of thing as o-rings on the screw points

[gaunt marten]

[empty sinew]

probably more for the PCB not to get any scratches\dents

[cyan adder]

Finally got my jades, yikes packaging is rude

[untold wigeon]

now i just need my ansi module and its done😄

[idle pier]

i bought mine from ali and got them in a plastic box without any label, wanted to know if they were legit but damn you got even more unlucky than i

[untold wigeon]

yeah this feels better then alumaze imo

dunno wh

[untold wigeon]

i used these and the ones that i had on the alumaze for the screws

[untold wigeon]

they're fine

[cyan adder]

Well I bought them from Kprepublic official store

Which is totally legit so

I will just put them in my own jar

[untold wigeon]

there's fake switches? 😄

[idle pier]

mine came in like this (sorry for dirty desk this ikea thing is atrociously impossible to keep clean)

[gaunt marten]

unless u buy the exact amount u probs wont get the official box

[idle pier]

bought 70 on ali express

[gaunt marten]

nvm i forgot for jades specifically

retailers doesnt get box

this is how they ship jades

to retailers

my friend is an official retailer here

[idle pier]

i mean they sound great, function on my wooting normally and look exactly the same so i wasnt that worried ahha

but thats super cool insight thanks

i guess this is cheaper for shipping yeah

[wet hazel]

Yeah, had the same packaging from Kprepublic but the Jades work fine

[empty sinew]

I can't wait to get my peaches

hopefully china delivers fast 😄

[idle pier]

is that a new HE switch?

[untold wigeon]

yes

ks-20u

[glacial wind]

it is a bit funny they didn't even give a cheapie plastic container like a lot of other brands do and just threw them in a baggy lol

[untold wigeon]

wonder how they come in packs of 10 from mechkeys

[glacial wind]

baggy is fairly normal but usually the brands as least get a nicer looking branded baggy instead of something from the supermarket aisle

Geon raptors came like this for example

[untold wigeon]

nah this redux is literally fire

[untold wigeon]

this how it looks from mechkeys?

[glacial wind]

nah this is from geon in korea

[untold wigeon]

ah okay

[glacial wind]

usually most brands have cheapie mini plastic tins or branded baggies

[untold wigeon]

have u ordered from mechkeys before?

[glacial wind]

nah not personally

[untold wigeon]

okay

[glacial wind]

i wouldn't really mind if it came in a cheapie baggy though, it's just funny that a retailer was too cheap to even use branded ones

[untold wigeon]

i wouldnt either as long as it works and isnt damaged

i get my pbtfans keycap set next week

WoB

cant wait

[glacial wind]

i like that set. That and the wuque studio bow are my go-to wob/bow

[untold wigeon]

hows the feel on them?

[glacial wind]

standard pbt feel

[untold wigeon]

like the wooting ones?

[glacial wind]

honestly not even sure how the wooting ones feel, i've never used the stock wooting keycaps

[untold wigeon]

ah okay

but its different from pbt dye sub keycaps right?

since they are double shot

[glacial wind]

eh not really. Double shot can get better legend quality but feel wise i don't notice any real difference assuming both sets are quality ones

[untold wigeon]

i noticed a different from wootings double shot pbt compared to the dye sub ones i have now

wootings felt more grippy ish

dunno how to explain it really

[glacial wind]

there's different levels of pbt materials you can use

[untold wigeon]

ah

[glacial wind]

some brands mix abs into pbt as well, so not all pbt keycaps are the same amount of pbt

[untold wigeon]

hope the pbtfans are a little bit on the grippy side and not slippery xd

[glacial wind]

if you ever want super grippy you can always get pulsar supergrip for keyboard stickers

some folks put that on wasd for example to get rubber keycap grip feel without needing to change keycaps constantly from the wear

[untold wigeon]

nah nah i just want a little bit grippy but not too much

yeah on reviews it has texture

so thats good

1.6mm thick also

[cyan adder]

Found a jar

[glacial wind]

honestly i'm just glad we're past the days of scuffed molds being considered good quality

like comparing some of my earlier sets from few years back to entry level sets now. It's funny how much scuffed edging and warping on pbt keys was considered good back then

[idle pier]

wtf thats ggenius xd

[harsh dove]

Magic lol

[wind karma]

mods?

that sounds really nice imo

[harsh dove]

Tofu x Jades x TX AP Clip Ins x CF Plate x Case foam x Plate foam/sandwich pad x Tofu Switch Pad x Friction Mount

[wind karma]

which case foam? and im assuming you're talking about the silicone sandwich pad and poron plate foam?

[harsh dove]

Yeah but I’m using the foam one , not silicone

And the tofu case foam

[wind karma]

ohhh alright

wait i'm confused lol

plate foam and sandwich pad are the same thing?

[harsh dove]

yeah, I always call it plate foam but it's listed as poron sandwich pad on Wooting website iirc

[wind karma]

i see

soo
tofu60 redux
gateron magnetic jade
carbon fiber plate
tofu case foam
poron plate foam
tofu switch pad
FRICTION MOUNT

okay but why tofu case foam over wootings?

and cf plate?

[harsh dove]

I just like how smooth it is

CF Plate is carbon fiber plate

[wind karma]

ye i know

why cf over pc i mean

[wind karma]

soundwise or like

literally the material lol

jades on cf plates sound really marbley in a way tho

[harsh dove]

soundwise

[wind karma]

i see

[agile grove]

should try polyfill

[untold wigeon]

i also prefer tofu's case foam over wooting

[wind karma]

how does it sound compared to the wooting.. all i know is that it sounds smoother

[untold wigeon]

idk what to tell you

i use

tofu case

brass weight

tofu case foam

poron pad

pc plate

and 3 layers of tape

and orings around stand offs

mine sounds amazing

i really like how this sounds over the alumaze

[harsh dove]

I have some

[wind karma]

do you have a recording of how it sounds? the build you have is basically what i was going to do except mount and case foam lol

[untold wigeon]

i do not

i can record on my phone

but its way lounder on the phone comapred to irl

its creamy to me irl

which was what i was going after

[untold wigeon]

something like this

its not that accurate

sounds better irl😄

[wind karma]

oh oh

[untold wigeon]

phone recording type shit

[wind karma]

yea proper mic needed i guess? sounds off on a phone recording

[untold wigeon]

yes

its thocky to say the least

[wind karma]

i can imagine how it would actually sound tho phone mic just doesnt do jutice here

[wind karma]

yeah i like the deep profile

[untold wigeon]

yea then youll like

[wind karma]

which switches are those

[untold wigeon]

L45’s

stock lubed

[wind karma]

ill like what?

[untold wigeon]

while i wait for my ks-20u

[wind karma]

ohh

[wind karma]

that should be even deeper correct?

[untold wigeon]

the build i posted

[untold wigeon]

yes they are

[wind karma]

oh ye

[untold wigeon]

also waiting for some new keycaps that comes next week

[wind karma]

only difference is i would choose the ks-20U or jades over any lekker so

[wind karma]

which keycaps are they?

[wind karma]

ah

[untold wigeon]

kbnordic WoB

[wind karma]

i want gateron to make a double rail closed bottom HE switch

[untold wigeon]

ive had these for 2 days

imma sell em off

since im getting pbtfans WoB

[wind karma]

ohhhh i see

[untold wigeon]

here’s how it looks tho

[wind karma]

yeah i was going to build a red/white themed keyboard

but

[untold wigeon]

gonna get a new cable someday

[wind karma]

i might have to go with a gray tofu60redux with PBTfans wob

[untold wigeon]

yeah banger

[wind karma]

it's hard to find red/white stuff lol

[untold wigeon]

u could go BoW too if u pick a gray case

[wind karma]

i think it looks more black than gray

wait

[untold wigeon]

ah i see

i havnt look i just got the black one

waiting for my ulx to come ans setup is done😄

[wind karma]

ye i remember it looks more black than gray

cant find who said it..

[untold wigeon]

yeah

either one works

BoW and WoB

[warped inlet]

what height have the stock foam case of wooting?

[untold wigeon]

just what u prefer really

[wind karma]

found this from some random vid but this is gray anodized

[untold wigeon]

oh is that pbtfans keycaps?

they clean anyway

cant wait to get my ansi module

[wind karma]

let me check

it's GMK

[untold wigeon]

yeah gmk also nice

but pricey

[wind karma]

ye plus its prolly abs

[untold wigeon]

yeah

[wind karma]

keycap shine makes me play worse cause the feel frustrates me LOL

[wet hazel]

Gmk is always ABS I think

[wind karma]

yeah i think so too, just not 100% on it

[wind karma]

man i have a lot to do for my setup to be done

mouse mousepad keyboard chair LOL

[untold wigeon]

i need a new chair aswell

i hate mine

[wind karma]

same man

maybe i need a new desk tho im short as hell

yeah i need a desk more nvm LOL

[untold wigeon]

yea look at this

i hate that red thing on my chair

altough it looks like it fits perfect in that picture😂

[stray tiger]

Im 100% the opposite. I love the tacky feeling from the shine and helps me play better

[untold wigeon]

i could never

preference at the end of the day

[lilac edge]

What kind of springs fit lekker switchs?

[untold wigeon]

#🪛│modding_faq

as they told u in general

[wind karma]

is that... an air 58?

[untold wigeon]

yes

[wind karma]

im guessing you just played well wth it so never decided to buy anything else?

[untold wigeon]

i have both😄

[untold wigeon]

ive tried gpx, i hated it

the shape of the air58 fits le the best

[warped inlet]

what chair is that? look comfy

[untold wigeon]

hence why i bought the ulx

[wind karma]

damn. me personally, my fingers start feeling itchy cause of it.. perhaps somethig i should worry about but shine makes it worse

[wind karma]

i see

[untold wigeon]

oh boy trust me this chair hurts ur butt dont buy it

ulx tiger banger mouse i hope

if not ill return😁

[warped inlet]

is a herman miller?

[untold wigeon]

no haha

althought i want the aeron one

its an ikea chair bruh

dont buy it just trust me

[wind karma]

probably better then the air58 though

[warped inlet]

okok trust u

[wind karma]

i want whiteand red keycaps to match this 🤬

[untold wigeon]

yeah its an upgraded air58 in my eyes

[untold wigeon]

https://www.customkeycaps.co.uk/products/red-and-whiite-pbt-keycaps?variant=39555689676885

shine thru tho

on legends

[wind karma]

thats what i see it as too

[wind karma]

i like the shade of red but the legends and shine thru aren't it for me

and japanese sublegends would be sick cause im quirky like that

[untold wigeon]

yeah

feel that

[green pebble]

Classic Aeron can be found for pretty cheap secondhand. Wework went out of business so they've been liquidating their chairs so you can usually find a Sayl or Aeron, other offices usually liquidate the Aeron when they close or move buildings too. I bought my Embody at a corporate rate and it's great. I was looking at the Steelcase Gesture at the time too but I was able to get the Herman Miller for a better price.

[wind karma]

yup. pretty hard to find a good set ig with what i'm looking for

[untold wigeon]

shipping will be a pain to EU tho

[untold wigeon]

always have hope brotherman

[green pebble]

Local secondhand is your best bet. With no exaggeration the Aeron has been the most popular office chair for 20 years. I’ve seen the classic models go for 300 CAD and the new remastered model fully loaded go for 600 to 700 CAD on local marketplaces. They go FAST though.

[untold wigeon]

yeah ive seen that

i found a couple for 400 euro

[wind karma]

yup

[green pebble]

Even if you get it new the investment is worthwhile if you spend an extended amount of time at your desk. I work at home as a software engineer so I’m sitting all day

I can promise you won’t be disappointed 👍

[untold wigeon]

oh i know they're good, ive havnt heard anything bad about them yet, just gotta find the perfect price point 😄

bro lmfoa

i literally cannot get above 65wpm xd

[warped inlet]

u need that so 😂

[wind karma]

bro......

😭

[untold wigeon]

wait how?

is that the one from finalmouse?

the scrollwheel

[warped inlet]

nope, i have a black one also on my lamzu, a shop on AliExpress start to sell these rubber bands

[untold wigeon]

can u link pls?

[warped inlet]

https://a.aliexpress.com/_EJbTz1L those are for the starlight, there's other mouse compatible

[untold wigeon]

damn the cant make one for ulx?

[empty sinew]

Mounted the tofu

Damn looks good

[untold wigeon]

can i text the shop somehow?

[warped inlet]

i think so like any other shop..

[untold wigeon]

ive never used aliexpress so idk how to lol

[warped inlet]

below the review of the product should be a "ask now" button

[warped inlet]

if u know the size wheel of the ulx u can try to compare to the bands they sell, i see they sell for gpx,razer viper and other mice

[bold sentinel]

What's the best switches for gaming?

[untold wigeon]

im trynna ask om FM discord but no one answers me

[polar girder]

That’s nasty bro

Nice

I can’t wait for the M3K PCB drop

Otherwise might try the OP1

The razer wireless performance is really good. But still can’t quite beat wired and I just generally need a lighter mouse

Viper v2 pro too heavy

[empty sinew]

must say the Acrylic has rlly lovely sound

[median spade]

Op1 8k Goated

Love mine

[polar girder]

Yeah acrylic or PC case tempting NGL

[polar girder]

What grip?

[median spade]

Relaxed pincer

[untold wigeon]

nah that question aint real

[half marsh]

☠️

[feral jacinth]

I just woke up man give me a break

I figured it out

🫡

[untold wigeon]

there u go😂

[wild sphinx]

Personally going to go with the GPX 2

[nimble warren]

\

[wind karma]

why does that mouse have sm hype

not saying its bad i’m just confused about what makes it so great ykyk

[median spade]

Shape and performance

[wind karma]

what about the shape?

performance yeah i saw its good

is it about the width cause it looks narrower than most mixe

mixe

i cant spell

[median spade]

Shape is Goated for claw and relaxed claw is all

[wind karma]

ohh okay

[median spade]

But it’s the fastest mouse in terms of performance also rn

[wind karma]

i like mice with a small mid hump but the OP1’s width looks rlly nice unfortunate for me

[wind karma]

yup

plus i like lower weight mice

[cyan adder]

@harsh dove yo

I started opening my jades

The factory lube on the stems is very good and consistent, what did u do on the stem factory lube ? Did u lube it over the factory lune or just let it like that ? Idk what to do. Already did bag lubing the spring and top/ bottom housing, only wondering about the stems

[stray tiger]

Just lube over it

[untold wigeon]

were u going to record a new vid for the switches thockfather?

[stray tiger]

Yes sir I am. Waiting on a new mount for the other mic to arrive tomorrow so that i can fix some echo issues

[untold wigeon]

awsome man!

[polar girder]

Yeah op1 took over the dav3 wired for value performance and nice that’s its diff and not a big ergo. Goated

[pastel vigil]

Do any of you mix and match keycaps I'm looking to do that with these two, thoughts? https://www.nouvolo.com/products/gmk-metropolis-keycap-set https://www.deskhero.ca/products/gmk-metropolis-2-in-stock-extras?variant=40195316383810

[stray tiger]

Thats not a mix & match. Thats the same set

[pastel vigil]

I assumed so but the colours don't look exact. One is also ABS and one is PBT so am not sure how well that translates to both feel as well as color matching.

[stray tiger]

They are both ABS unless one is fake. The 2 just means its the second run of the set.

[pastel vigil]

one could be fake, I don't know much about keyboards.

[stray tiger]

If they are from Deskhero then you are good. They are legit

[pastel vigil]

Good to know, thanks!

[cyan adder]

Ok m’y jade done lubing. Oof fgsake I only have to do it once

[harsh dove]

First link is clones /fake

From Nouvolo

Deskhero is legit

[fluid ravine]

Hey pops, now ive been thinking about it, decided to not think about getting new switches. Find that my tapped l60's sounds good enough. A bit of stem wobble here and there but dont mind it at all

[stray tiger]

Plus you never know what the new Lekkers will be like. Could be awesome 🙂

[fluid ravine]

argggggggggggggggggghhhhhhhhh

[quiet bay]

do u guys know any places to find nice keycap modifiers 🤔

im trying to find black keycap modifiers to replace my current ones

since they're kind of uh..broken

I can just get the same set but I wanna switch it up

actually lemme just search up novelty keycaps

[fluid ravine]

Well maybe not gonna think about the latest releases of HE switches, hope the future releases get better

[cyan adder]

stupid question but

should i change anything in wootility settings now i got my jades

dang first time typing for real with my jades

[fluid ravine]

should be fine

[cyan adder]

so sad i dont have a microphone that realistically record the sound of my keyboard

[polar girder]

Lekker 2.0 when tho

Like 2024?

[cyan adder]

sounds like shotgun in counter strike

First sound test of my jades, they sound clacky on record but they are the opposite (more thocky) in real

[fluid ravine]

If there were to be a Lekker 2.0, wouldn't it sound like the peaches and have tighter tolerance without the dual rails like the jades.
Like IF they were doing the same materials and everything

[harsh dove]

Lekker V2 needs closed bottom lol

Which it won’t

Tired of the HE upstroke

That’s all we hear

[fluid ravine]

indeed

[fluid ravine]

closed bottoms, tighter tolerance, nylon housing?

:0

[harsh dove]

Full opaque pom switch or that special Gateron blend from the black inks

[quiet bay]

and all that without affecting performance

[fluid ravine]

yeeee

[fluid ravine]

shi finna be $120

💀

[harsh dove]

lol nah

[fluid ravine]

itd be amazing but im good

[harsh dove]

Knowing wooting

I think they’ll try something kinda different but idk

I expect a nice switch

[fluid ravine]

same here

[quiet bay]

as close as possible to a mechanical switch

[polar girder]

Need a tiny yet powerful magnet

Minimize weight in stem

Box stem?

Dual rail didn’t improve sound much it seems. Just tightened up wobble

[quiet bay]

They did attempt that before but idk what happened

[polar girder]

They switched manufacturers to gateron

Yeah I learned about that whole lineage and was disappointed to see a lekker with box stem that never lived lol

The lekker springs work on the raptors FWIW

[quiet bay]

and now it may be possible they're cutting ties with gateron

[polar girder]

just need non-magnetic springs

[polar girder]

Oh wow

In house time?

[quiet bay]

I mean they did make all those switches without telling wooting

[polar girder]

😅

[quiet bay]

idk but it doesn't seem like they're on good terms

[polar girder]

I mean Wooting always said end goal was Wooting made lekker switch

I’m just not sure if they’re ready yet

Would be sweet

Just different weights/actuations

Very similar

[agile grove]

doesnt change anything

I will note that im taking this from lekkers, but im assuming it would be the same here

[harsh dove]

Of all the videos/sound test I’ve heard of people with filmed HE switches, they all sound the same as if they weren’t filmed to me

To me filming does nothing for HE switches

[quiet bay]

in my experience they did tighten top housing but did make it sound clackier

[harsh dove]

Fair, yeah I haven’t used them on any of the HE switches I have but just based on videos they don’t seem to change sound much, but I do imagine they tighten housing

[median spade]

I did it on my raptors and lekkers

Made housing a tad tighter but nothing to sound in my back to back sound test

Gib MX Black HE edition

[agile grove]

does anyone know any good cheap 205g0 and switch openers?

[untold wigeon]

from kinetic labs and they have a switch opener for 12.99

[cyan adder]

Aliexpress switch opener

[polar girder]

I could use a syringe

[wind karma]

hey @harsh dove did you try the ks20u’s in the build you sent yesterday

[harsh dove]

No

[meager pine]

Has anyone here used a custom PP plate in their wooting build?

[drifting stream]

I plan on doing so, love the pp plate on my other board tho

[meager pine]

Sweet lmk how if when you do because im curious on adding it to my board

[drifting stream]

for the friction mount, I would like to know which type of gummy o ring should I get for the same case?

[harsh dove]

I'm using a Graveshift M-size 40A Ring

[agile grove]

graveshift S for screw in stabs, M for plate mount.

[drifting stream]

noted, much appreciated!

[wind karma]

hmmm do you plan on trying it

[tired girder]

Yo anyone know good key cap vendors?

Looking for a black theme

[untold wigeon]

pbtfna

fans

[pastel vigil]

Is it worth it to change the stabilizers? If so, what is recommended? Using magnetic jades

[paper bloom]

#🪛│modding_faq

[paper bloom]

Idk about TX Ap's You gotta check i know cam's TX AP's clip ins worked

Screw ins don't fit

[fallen crag]

Hand lubed stabs on the 60HE seem fine for me, got no rattle at all. Is there any other benefit of screw ins?

[paper bloom]

Got told its less wobbly

But there is a risk where when you remove the PCB you gotta be careful

Since its screwed in

[fallen crag]

I already had the whole thing disassembled, changed almost everything except switches and keycaps

[paper bloom]

I c

Btw is it hard af to remove the screw in stabs

LOL

[fallen crag]

Cant say, dont have the +

[paper bloom]

Ah okay

[fallen crag]

I just went alumaze and PC plate, as well as lubing everything

Stabs sit firm and if ya give them plenty of lube on the sides as well, they are pretty much silent

[paper bloom]

Nice

Nvm i gotta remove the plate

THEN I CAN uninstall the PCB

screw ins

https://www.youtube.com/watch?v=vxHb6CJc9V8&t=488s

[untold wigeon]

what? i thought the 1.6mm fit?

[paper bloom]

No? since when was that stated in #🪛│modding_faq I hear some say it fits cuz they trim off the PC

[fallen crag]

I just did it blind, no videos, after a 12h shift xD

[paper bloom]

Either way just watch yourself idk @untold wigeon

[empty sinew]

Wdym?

Depends what keyboard you have

For the module it should fit without issues

[paper bloom]

no

Its a well known fact, The stabilizers for TX Ap's are a 50 50 same as stabies

staebies*

All in #🪛│modding_faq

[empty sinew]

my friend got 3-4 of them

and they all fit

I don't need modding faq

[paper bloom]

Screw ins

[empty sinew]

yes?

[paper bloom]

Hm

[empty sinew]

the module has screw ins

not the prebuilt

[paper bloom]

WELP individual ig

[empty sinew]

which has pcb plate mounted ones

[paper bloom]

Since some reported saying it wouldnt work and they gotta carve it out to fit

[empty sinew]

there are tolerances

but its rare

your more likely to have them fit perfectly then not

some of them might come from TX a bit wider

and then they are a "tight" fit

[paper bloom]

I c

[empty sinew]

anyhow you can also lube\grease the stock

as I did

and it works pretty well

greasing hard the end of the wires, till the curvey spot and a bit over

then lubing the stem and the housing

thin coating

makes them pretty much no rattle

but they are still tiny bit wobbly

also some tighten the screws very hard, which I don't like

I found that just tightening very carefull till its just enough is good

[paper bloom]

I see welp

HOPEFULLY it works for the others

[empty sinew]

note that wire should use the grease and the housing the lube

lube on wire is not that good

its not as thick

[fallen crag]

It always kills me on the inside, when ppl go full torque on a tiny screw.. Especially if its on a board..

[empty sinew]

Yeah golden rules small screw small torque 🙂

[fallen crag]

On a PCB its not even about the screw, but the stress u put on the PCB.. Its very easy to demage the board doing that.

[pastel vigil]

Does the 60HE+ prebuilt come with this https://wooting.io/product/60he-pc-switch-plate already installed? I'm confused on the wording in their website.

[fallen crag]

PC plate, silicon pad and screw ins are pre installed on the module,

[paper bloom]

It comes poron foam and silicone

Which is pre installed

Damn now im thinking about going into my PCB and have it change out for poron foam

LOL

[fallen crag]

the 60HE+ comes with steel plate and poron foam

[paper bloom]

But the silicone sounds nice

[fallen crag]

Changed my poron for silicone

[pastel vigil]

ok, so i will get this then. Since I dont want a steel plate.

[fallen crag]

If you dont want steel plate go with the module

[paper bloom]

LMAO

[pastel vigil]

I ordered the prebuilt because I wanna try it stock as is and then am gonna swap out the plate, case and keycaps. Debating if I wanna do anything with the stabs.

[fallen crag]

D is stock lube

[paper bloom]

Yea theyre hella different

[fallen crag]

Did the same, it sounds better than most gaming keyboards, but Alumaze, PC plate, silicone pad and handlubed switches+stabs sound better for me

[fallen crag]

Yep, also feel a little nicer

[paper bloom]

Since i got a module and a prebuilt

I cld just change the plates and leave it as it is

[pastel vigil]

It's my first time getting a customizable keyboard so it's also a fun project and something to learn on. I'm gonna record the sound stock,then after lubing, then after swapping out every component and then the final build all together so I can get a feel for things.

[paper bloom]

I legit dont wanna start lubing my keyboard yet since im waiting on my new house and then setup a workshop from there

[fallen crag]

Yee, would just do both xD

[fallen crag]

Its my first time modding as well

[paper bloom]

And then for the 4th keyboard im gonna use the

Shipping's box

as a padded foam

[fallen crag]

Lol

[paper bloom]

To try it out on a stock

Then a PCB change out of the silicone and poron and a self arts and crafts box Foam

LOOL

[fallen crag]

Still got some sound dampening from my car 👀

[paper bloom]

BRO TPU/RUBBER FOAM

OR the padding

LOOL

Thats actually a good idea

[fallen crag]

Alubutyl goes brrrr

[paper bloom]

Gonna be like:

https://tenor.com/view/solid-snake-kept-you-waiting-huh-super-smash-bros-brawl-the-subspace-emissary-just-a-box-gif-25132894

[fallen crag]

Thinking about a way to silence the bottom out noises

[paper bloom]

There was a method i thought of

But its actually schizo af

and it cld damage your switch

and PCB

[fallen crag]

Small rubber stripes on the parts that hit eachother

[paper bloom]

Nah you add TPU on the housing and then just slap lube in it

and then for the bottoming out you run some sort of tape (has to be conductive) to the eletrical

But there arent any of that

[paper bloom]

If not you can run a small one where the magnetic pole strikes

And then dampen it

[fallen crag]

Got plenty electrical tape

[paper bloom]

Eletrical TAPE DOES Not work since it might mess with the magnetic force

BUT if u strip it out to the thinnest

[fallen crag]

:/

[paper bloom]

IDK its an experiment i just thought of

and it IS SCHIZO AF

[fallen crag]

Strong raptor magnet + electrical tape

[paper bloom]

I mean there are many work arounds

[paper bloom]

IG thats one way LOL

[fallen crag]

Just brute force magnetic field

[paper bloom]

Cuz im p certain u def can do what i said but if its damaged and what not idk what to say LOL

Since i just thought of it

[paper bloom]

You can do tape on the housing and that

and it SHLD compensate

[fallen crag]

I already overlubed a little on top and bottom

[paper bloom]

Thats still okay

[fallen crag]

Ye, dont want the switch to get stuck xD

[paper bloom]

XD

[fallen crag]

Already got that experience with one of my kb due to alcohol being dumped over it.. x.x

[paper bloom]

Big L

[fallen crag]

Glad it was just a cheap 10€ mouse/kb combo

After that i went mech kb

[paper bloom]

nice

[fallen crag]

Btw, what new mouse u gettin?

Oh, wait, was it you? .-.

[paper bloom]

Rn im contemplating to switch out my G303

But idk what has the proper fitting and dimension Cuz i love the Shroud edition too much

[fallen crag]

Gladly i can just adjust to most mice xD

[paper bloom]

I can as well, itd take me like 3 hrs

Or 2 days

[fallen crag]

You got a store near you, where you can try them?

[paper bloom]

I do but their samples are trash

[fallen crag]

Oh..

[paper bloom]

Cuz the coating has been removed from periodic alcohol wiping

[fallen crag]

xD

Wear test

[empty sinew]

I kindof wanna test the WLMouse Beast X

[fallen crag]

Thats why i dont like coating, all mice i had so far died because of the coating going bad

[empty sinew]

I heard so many good things about it

[fallen crag]

My current mouse got coating as well, feels good and holds up so far

Maybe i just got bad luck with cheap coatings

[paper bloom]

Mine hasnt

I was gonna get the final mouse or some sort of mag mouse

I dont wanna get a zowie since their sensor is altough good but iffy

I didnt wanna run a finalmouse since their so fucking expensive

[empty sinew]

WLmouse 🙂

I like that it supports modding aspect

it doesn't include any feet oob

so you can unscrew it easily before sticking any skates you like

[fallen crag]

Im happy with my wired DAV3 , its light, can barely feel the cable, since i dont really need to move the mouse and it got a nice form

But nothing like the 303

[paper bloom]

I just run the G303 since it has a claw grip

spec

[empty sinew]

Viper V2 Pro atm its pretty good shape for me, I do relaxed claw kindof

[paper bloom]

I used to run that but not anymore

[empty sinew]

only thing I don't like about it its the wheel

bit stiff and click is hard

[fallen crag]

I only move the mouse with my fingers

[paper bloom]

The reason i have it swapped out is cuz of the

Lightness

ive hit my mouse b4 and it has never come out unscathed

[empty sinew]

i like ultra light

[fallen crag]

Why u punching the mouse? :0

[paper bloom]

Na is cuz of situational flicks

I used to Flick so hard and out extend to get my enemy

[empty sinew]

the bro be hitting them heads

[paper bloom]

From the range of motion

[empty sinew]

with flicks

[paper bloom]

There have been times where

Ive flicked so hard i let go of my mouse and it flies mid air

LOL

[fallen crag]

Lol

[paper bloom]

By accident too

[fallen crag]

If i do flicks i only move my hand to enter lightspeed mode

[paper bloom]

I move the entire thing dude

[fallen crag]

U a low DPI player

[paper bloom]

Ye

450 DPI 6/11 with a 1k polling rate

[fallen crag]

Im on the othe end of extreme xD

[paper bloom]

Ik

You told me b4

[fallen crag]

Used to play with 800 way back

Then stated to go higher due to space issues

Now i got plenty of space, but mouse just sits at 1 spot, and im still aimbot precise xD

Ik the feeling of accidentally punching a wall, or going offroad with the mouse xD

But never yeeted it away, it always got tanked by my hand

[paper bloom]

Yea lmao

[paper bloom]

I YEETED IT DUDE

[fallen crag]

U ever considered going higher in DPI?

It may fix your issue, but the higher you get, the harder it is to hit the target consistantly

1.600 to 3.200 are still very playable

If you go any higher, you need to aim more with fingers and hand, no longer with the arms

And you need to pushe your precision to the max

25.800 DPI are hella exhausting, went back to only 12.400 on the same 1%
Way easier in game and on desktop xD

[empty sinew]

me 800 dpi 🙂

[fallen crag]

Yall are low DPI players, only found 1 person so far with even higher DPI

[empty sinew]

I still can't figure if I am more finger grip or claw grip player

I variate between the two

like when I move freely I use finger without support, but then for precise holding small movements I rest the hand on the back of mouse

[fallen crag]

I do the same

Its for stabilizing the movement

[shell crown]

HOW

12400 wtf

[fallen crag]

Training and concentration

Going back to 3200DPI would feel like 100DPI to you

[ocean widget]

Im fine one 950 xd

[fallen crag]

Back with my xm1 i went from 800 to 1600 and then capped out at 3200DPI 20%.
With the DAV3 i went from 3200 20% to 6400 10%, to 12400 5% and peaked at 26800 1% for a few months. Now i went back to 12400 and 1%.. I may switch back to 26k later on

Also windows is neutral at 6/11, so i use the full DPI on desktop as well

[fallen crag]

But found some that runs like 55000 DPI 1% ing

[paper bloom]

@fallen crag man u gotta play fps games with me

Ima see u flick 360 degree and get an ACE

[fallen crag]

What ya playing?

[paper bloom]

Siege, val(region locked)

[fallen crag]

Im still stuck to BF4, since i couldnt find a replacement yet.
Hero and lootshooters arent really my thing and CS2 is way too slow for me

[empty sinew]

Warzone 😉

[fallen crag]

Is there a way to crack that?

[fallen crag]

I got Siege, but didnt touch that since it came out

[warped inlet]

poron pad like that can be useful for lekker 45?

[fallen crag]

Also R6 V2 the first game i started sweating xD

[fallen crag]

The L60s are already pretty tight in there on my board, so they may not fit

[fallen crag]

Could try, but im more of a small-medium map enjoyer

[fallen crag]

But for 5€ one could just try

Dont think anyone used them here yet

[shell crown]

Someone did, not sure if it's useful

[fallen crag]

I have my doubhts that it is, but 3,81€ to try them, isnt much

[empty sinew]

has a small resurgance map, where you respawn over time

if you get killed and your teammates survive

[fallen crag]

Just bought them, lets see if the do shit

[paper bloom]

I mean if ur in the same country region as me we will be gucci and we can play siege LMAO

[fallen crag]

Germany pretty much on the border with Netherland

[fallen crag]

V2 used to have regional lock as well, but you could delete a few things to unlock worldwide

[paper bloom]

Well it shld work so dw

[paper bloom]

We can play rainbow six siege LOL

[river socket]

durock v2 stabs or wooting 60he+ mudule stabs?

[untold wigeon]

ap tx

[river socket]

?