gn and thx a lot
#🔧│keyboard_modding
weak inlet
unborn cargo
https://www.youtube.com/watch?v=N7CoA5bM93I can i make the Wooting 60HE sound like this the same way he does it or do i need a different way?
pine tiger
Anyone else had the issue where their inputs cut out with rapid trigger set at 0.1mm after a case swap? (E.g. holding W and it just randomly stops)
No problems when changing it to 1mm, all screws were finger tight when I put everything back together (tachyon mode with the OG cable too)
lethal dove
Anyone else had the issue where their inputs cut out with rapid trigger set at 0...
how did you mount the pcb to the case? just with the screws no orings etc?
pine tiger
how did you mount the pcb to the case? just with the screws no orings etc?
yeah just screws, i used the tofu screws instead of the OG ones, but theyre tight no shouldnt be an issue
lethal dove
yeah just screws, i used the tofu screws instead of the OG ones, but theyre tigh...
hm ok, I was thinking maybe with some flex the 0.1 might be too sensitive. but if its screwed in that cant be it
sullen salmon
https://www.youtube.com/watch?v=N7CoA5bM93I can i make the Wooting 60HE sound li...
mine honestly sounds better than this, little bit less scratchy and deeper. lube your switches, get a poly carb plate for the wooting, maybe new case, tape mod, lube stabs, bandaid on pcb and use all case foam. also new keycaps ideally
unborn cargo
mine honestly sounds better than this, little bit less scratchy and deeper. lub...
are there tutorials on yt? i dont understand much about keyboards
sullen salmon
there will be yes
customizing and modding keyboards is quite a broad genre now, there's loads of content out there for it and it's surprisingly extremely easy
unborn cargo
i bought the lubing kit from wooting too
sullen salmon
that'll be just fine
make sure to luhe the spring, bottom and top housing and stem
unborn cargo
so what do i need to buy a new case a tape and thats it?
sullen salmon
only use a very thin layer tho
unborn cargo
only use a very thin layer tho
ok
sullen salmon
so what do i need to buy a new case a tape and thats it?
potentially
unborn cargo
what is a poly carb plate
sullen salmon
it's up to you whether or not to buy a case
sullen salmon
what is a poly carb plate
it's a type of material that they use for the switch plate, a switch plate is what switches sit in
unborn cargo
it's up to you whether or not to buy a case
only if it makes a sound difference
sullen salmon
it changes the feel but mostly the sound
sullen salmon
only if it makes a sound difference
it can
maybe not the one you want tho. lubing and 3 layers of tape mod typically have the biggest sound for me
unborn cargo
which tape
sullen salmon
I used painters tape which is usually recommend however I've seen people use electrical tape as it's a bit safer around batteries and what not
blue painters tape is what most ppl use
unborn cargo
I used painters tape which is usually recommend however I've seen people use ele...
can i also use masking tape?
sullen salmon
do i put 3 layers on where?
the back of the PCB. make sure to poke holes for the screw holes after applying
typically you do it after finishing everything inside the board and are putting it back together
sullen salmon
can i also use masking tape?
you could but I wouldn't recommend it if you plan on modding it again
painters tape comes off easier which helps if you mess something up or want to change something
unborn cargo
ok ty
untold wigeon
is the wooting arm rest even with the tofu 60 redux
sullen salmon
np
sullen salmon
it's actually flush with it I think
untold wigeon
okay
sullen salmon
like exact same height
cunning cove
I thought the length would bother me but don’t notice it. Except when looking at it up close (from afar can’t even tell)
rugged marten
can i use L45 switches for 60he?
untold wigeon
yes
pale aspen
slender depot
Does anybody have recommendations for the Spacebar on the 2HE? I want it to sound like thock
polar girder
Does anybody have recommendations for the Spacebar on the 2HE? I want it to soun...
I got one for 60HE. Pretty sure they have same space bar profile. Helped a little. Nothing too crazy.
Could probably fill it with something else too
harsh dove
Full Mod List:
Alumaze60 Just Black
GMK Sumi Keycaps
L60 Switches Lubed with 205g0
Springs lubed with Super Lube Oil
TX AP Stabs with 205g0 & Dielectric Grease
Stabs modded w/ stabilizing foam on wire and foam pad under stems
PC Plate
Silcone Pad
Burger Mount
Alumaze stock foam
Keebtape mod
Switch tape mod - 2 layers lubed w/205g0
Spacebar mod - 1mm thick foam
I think that’s it
cyan adder
How do you like it actually
harsh dove
It’s terrible
cyan adder
Terrible what
harsh dove
Lmao
cyan adder
Terrible you don’t like it ?
harsh dove
Nah it feels good
cyan adder
Sorry in France we say terrible even when we like it
harsh dove
harsh dove
I think it’s good but I definitely feel like it need to break in and over time the sound will fine tune itself if that makes sense
I’m also giving the spacebar foam another chance to redeem itself
cyan adder
Did u relube them
After switches tape mod
And yeah I can confirm after 1-2 weeks it’s even better
slender depot
https://nuphy.com/products/ghostbar
The KOP(OEM) profile is sold out, cherry is available. Should i just buy cherry?
polar girder
The KOP(OEM) profile is sold out, cherry is available. Should i just buy cherry?
That’s what I got FWIW
Cherry
harsh dove
Did u relube them
yeah that's why it took me so long, I relubed everything
just wanted consistency for all my switches
and I pre-cut all the strips of tape I needed
so that made it easy as I was lubing, when i finished lubing I just slapped the tape on and put the switches back together
TenZ wasn't lying when he said it takes 4-7 hrs lol
Definitely closer to 7 hours if you relube everything or are lubing for the first time
but probably 4 hrs if you're just doing tape mod
harsh dove
And the sound
IRL my friend said it sounds creamy lol
quiet bay
Uhh should I have gone for an all black keyboard
cyan adder
yeah that's why it took me so long, I relubed everything
Have you tested without relubing ? Did it feel scratchy ? Or u just go directly into lube job
dreamy drum
i did stumble across these
https://www.thockking.com/products/stabilizer-tape-for-band-aid-mod
precut tape for the stabilizer tape mod
for anyone lazy enough and cant be bothered to do it themselves
harsh dove
Have you tested without relubing ? Did it feel scratchy ? Or u just go directly ...
yeah I tested 3 switches un lubed and it was too scratchy for me
not only sound-wise but also in feel
like it felt scratchy
but all my switches come right back up nicely, I only had 2 that got stuck on the downward stroke but I fixed them
cyan adder
thanks for all your feedbacks ❤️
harsh dove
yeah, no problem
stray tiger
Morning all
quiet bay
Good afternoon
stray tiger
Fair enough, it's afternoon here too lol
stray tiger
12:26 here
harsh dove
Morning Tirade
slow idol
fluid ravine
Uhh should I have gone for an all black keyboard
yessss
fluid ravine
Man everyone having a clean ass setup
quiet bay
Man everyone having a clean ass setup
just have very little stuff on ur desk xd
and get a color scheme
fluid ravine
and get a color scheme
Color scheme all over the plac3
Literally
White
Black
Gray
Purple
Pink
quiet bay
Color scheme all over the plac3
Color scheme is key with setups lol
u gotta stick with it
fluid ravine
💀
quiet bay
but u dont even have one 😭
quiet bay
yis
fluid ravine
Eye catching 🤭
quiet bay
u can even order keycaps off aliexpress if ur on a budget xd
quiet bay
Nah I want the cannon keys blanks
did u order them yet
quiet bay
damn
honestly I regret getting my mic and shoulda just gone for a less flashy one
I like my mostly non-rgb setup
elder dune
building a high end gaming rig without rgb is nearly impossible these days.
quiet bay
building a high end gaming rig without rgb is nearly impossible these days.
I really wanna make a non rgb white/black pc build
and make it actually look good
but I dont have the funds for that yet soo :p
polar girder
Yeah my pc is whack aesthetically
Want to evolve to all white no-rgb
Tempted to upgrade to ddr5 with white no-rgb motherboard and ram but can’t be assed lol
elder dune
@quiet bay yeah I am a fan of black white non RGB builds, they look so timeless
polar girder
The AIO and GPU would still kill it
elder dune
@polar girder lol yeah this is why I had a 20 year old double sided server case with no window until a few weeks ago xD. IDGAF what it looks like as long as it's reliable, fast, quiet
elder dune
hide the small cables behidn the mobo bruh xD
polar girder
They’re the cables for the old GPU AIO fans
Useless and coming out of the GPU lol
They suck 
elder dune
ah you hooked it up to a proper loop now?
polar girder
It’s still AIO
on cpu and gpu
Just upgraded fans
P28’s all around
It’s a stock liquid cooled ROG strix card
Hot spot temp delta is slightly too high but not enough for me to mess with it lol
elder dune
shiesh okay they get pricey. just easier to deal with?
Yeah repasting can help with the delta but wait fo rit to get bad and try some PTM7950 TIM
it doesn't pump out so you won't have to do it again. I also run radeons for the last 15+ years lol
devout torrent
non-rgb white/black pc builds are non-existant
RGB gets the clicks
quiet bay
but I don't wanna bleed my setup with rgb 😔
quiet bay
oo ok
polar girder
shiesh okay they get pricey. just easier to deal with?
Yeah exactly. I could repad it once I care enough
elder dune
hey the 7800x3d is just about a year old same with 7900xtx 4090 etc etc still kings
quiet bay
maybe I can just get pc building simulator 2 and simulate my dream non-rgb pc in it
elder dune
Yeah exactly. I could repad it once I care enough
Gl when you do! I get PTSD from old bare die athlon/duron days of the risk of chipping them. GPUs of course. CPUs with modern heatspreaders are nearly foolproof
@quiet bay Do you like the ProArt boards? I think they look classy AF without RGB
polar girder
Yeah it seems like the cold plate on this one is pretty solid. Not that heavily used either so kind of weird the delta is like 20C
elder dune
@polar girder could be factory paste wasn't so good. 15 isn't super bad but it's also not super good for a new card
quiet bay
<@617121680417882132> Do you like the ProArt boards? I think they look classy AF...
oo yeah they do look clean
elder dune
*30f sorry i'm changing units
quiet bay
but im looking for a white/black theme that's non-rgb
glad ruin
Do we have any idea how much the Wooting 60HE Module kit will cost?
elder dune
yeah the proa rts don't have RGB. but just black lol. Check out the steel legend it might suit you for black and white build without being proart overpriced.
x670e steel legend. looks great till its covered by GPU. but the white parts pop if you do light it (even white light would do that...)
polar girder
Yeah a full proart build is pretty sexy NGL lol
fringe torrent
proart gpu looks so good 
unborn cargo
is there already foam in the wooting 60he?
harsh dove
yes
elder dune
is there already foam in the wooting 60he?
2 layers
unborn cargo
oh ok
so what more can i do to really improve the sound ? to make it more quiet and creamy
already bought the lubing kit too
elder dune
only thing against proart is Asus. I used Asus for last decade+ and they have dropped the ball more lately so I stayed away this time 😦 Or I would've done a pro art board
unborn cargo
so i dont need to replace the foam? is it good
fringe torrent
foam is fine
unborn cargo
so what else can i do to improve sound except lubing
harsh dove
yeah that was kind of the reason for me getting the MSI board over the ASUS boards for my 7800X3D, ASUS was havin some issues at first and were being kinda lame about their warranty @elder dune
elder dune
yeah that was kind of the reason for me getting the MSI board over the ASUS boar...
yeah bingo, and pushing bios default volts wayyy too high they have doen that for a while. So I gave ASRock their old company a shot lol
harsh dove
Yeah, now I would buy an ASUS board for my 7800X3D, no problem
harsh dove
yeah bingo, and pushing bios default volts wayyy too high they have doen that fo...
yep, exactly why I didn't get one
polar girder
MSI motherboard and Intel CPU ♥️
harsh dove
yeah I went with MSI X670E Carbon
elder dune
@polar girder yeah MSI and ASrock were my two contenders. Proart was so tempting but I just worried about support for it, it's the one thing ASUS lacks in atm
polar girder
Quite tempted by the z790i edge and the t-create 7200 sticks. No -RGB, all white. 
elder dune
@harsh dove they are a very good board.
elder dune
LOL
polar girder
Yeah I had an Asus prime b660 on my 12400. Solid board. Didn’t need much tho
elder dune
@polar girder white build lookin' crisp man
harsh dove
yeah proart screens are solid out of box
polar girder
Yeah my buddy got a proart 4080
fringe torrent
the motherboard designs are clean af
polar girder
Pretty sexy
fringe torrent
this with the rgb off is nice
elder dune
yeah thats tidy
harsh dove
this with the rgb off is nice
Lol I was gonna get the one thats a step up from this one with the led screen across the m.2
fringe torrent
Lol I was gonna get the one thats a step up from this one with the led screen ac...
oh that one looked cool but was in white i think at the time right ?
elder dune
I wish they bought back different coloured PCBs again. Used to get stuff in gold, translucent whiteish, green, etc etc
harsh dove
oh that one looked cool but was in white i think at the time right ?
yeah they have a black one now too
the white one is clean tho
I was gonna go for black
unborn cargo
I wish they bought back different coloured PCBs again. Used to get stuff in gold...
you got any good sites for mda keycaps?
fringe torrent
i pretty much went all black for my current build
elder dune
Sorry we don't do keycaps yet. Might get into it if there's something not made with enough demand though sorry 😦
fringe torrent
i left the rgb on too lazy to turn them off 
unborn cargo
Sorry we don't do keycaps yet. Might get into it if there's something not made ...
maybe you know any other websites that sell mda keycaps?
fringe torrent
plus i cant see them anyways when im at the pc
untold wigeon
just bought these keycaps
elder dune
@versed plinth dayag the only custom keycaps I have are freebies that came with PC hardware xD I'm the wrong person to ask lol
polar girder
The Dell OEM gpu’s with the green PCB are kinda neat lol
untold wigeon
my build is going to be insane
unborn cargo
<@766345813940633640> dayag the only custom keycaps I have are freebies that ca...
oh alr ty anyway man
unborn cargo
just bought these keycaps
oh they look fire where did u get them from? maybe they also got other stuff
elder dune
i left the rgb on too lazy to turn them off <:KEKW:869295189674565712>
yeah I will turn mine off when I take the PC back to my home country and it's on the desk xD Right now it's harder to see lol
untold wigeon
oh they look fire where did u get them from? maybe they also got other stuff
i bought them on amazon
idle pier
just bought these keycaps
is it just me or the enter key says "tenz"
untold wigeon
lmao ur kinda right i see it now too
untold wigeon
oh they look fire where did u get them from? maybe they also got other stuff
https://www.amazon.com/Japanese-Inukuma-Sublimation-Mechanical-Keyboard/dp/B097RBS4H6?th=1 heres the link
unborn cargo
ty man
quiet bay
is it just me or the enter key says "tenz"
I can't unsee it now 😔
unborn cargo
pretty cheap too
fringe torrent
untold wigeon
also bought this for the ESC key
elder dune
The Dell OEM gpu’s with the green PCB are kinda neat lol
hell yeah haha I love that old stuff. back in the days we'd get some wild ass colour PCBs lol, nowadays its black, white, grey if you're lucky
quiet bay
man how can I get this type of photography
untold wigeon
pretty cheap too
shipping was 15-25€
fringe torrent
man how can I get this type of photography
pick up camera point at subject and click
elder dune
@quiet bay lots of light, some tele/zoom and a stable camera
unborn cargo
shipping was 15-25€
for me to the middle east its prob gonna be 50 usd and takes at LEAST 2 weeks
fringe torrent
first photo was iphone 2nd was my canon
untold wigeon
for me to the middle east its prob gonna be 50 usd and takes at LEAST 2 weeks
amazon said itll come friday (24th) this week
quiet bay
<@617121680417882132> lots of light, some tele/zoom and a stable camera
I think I should start by not using my iphone x camera
unborn cargo
amazon said itll come friday (24th) this week
lucky you man 😦 ill move to the usa so it comes after a day and come back to the middle east
untold wigeon
lol
elder dune
@quiet bay you can do it with a cellphone they just need lot sof light. Within reason obviously and within your lens capabilities
elder dune
if you dont have strong lights (diffuse is best) take it outside 🙂
harsh dove
first photo was iphone 2nd was my canon
which iPhone
elder dune
the zoom removes some of the lens warp/distortion
unborn cargo
but its so damn expensive
quiet bay
if you dont have strong lights (diffuse is best) take it outside 🙂
I think I just have to unfold my window shades at the right time
elder dune
yessss good move
idle pier
phone is fine for photography
why is this pad so small
solemn flame
quiet bay
phone is fine for photography
ima be reall honest that gpx looks cropped in lmao
solemn flame
Left side of my wooting rattles after the bandaid mod, right side doesn’t. Any ideas?
fringe torrent
why is this pad so small
because its very small
harsh dove
ima be reall honest that gpx looks cropped in lmao
its not
its a prop
really well done if I might add
fringe torrent
why is this pad so small
its this small
harsh dove
Nah I know lol
idle pier
its this small
did you fail when ordering your first hien? and bought S? ahahahah
harsh dove
I thought the same too at first
fluid ravine
im homeeeeeeeeee
idle pier
its like a cute little mousepad
untold wigeon
dance dance
fringe torrent
did you fail when ordering your first hien? and bought S? ahahahah
nope i wanted a small one
you can see the arm
fluid ravine
hmmmmmmmmmmm
harsh dove
showing the behind the scenes secrets
idle pier
nope i wanted a small one
how come if i may ask? well i just checked my sens and im at 74.22CM/360 apparently so of course my brain has some issues processing this lol
open wagon
fringe torrent
how come if i may ask? well i just checked my sens and im at 74.22CM/360 apparen...
to pair with the laptop when out but at home the mice i have in rotation live on it
idle pier
to pair with the laptop when out but at home the mice i have in rotation live on...
LMAO thats actually fucking smart
open wagon
fringe torrent
i also have a medium artisan
idle pier
i also have a medium artisan
when i get a job i'll be rich like you and order myself an artisan pad for work lmfao
fringe torrent
when i get a job i'll be rich like you and order myself an artisan pad for work ...
nah im broke af
idle pier
bro lives on pasta to afford multiple sizes of hien 
idle pier
and btw why specifically a hien in small? i tried otsu and zero and i'm pretty sure they're way more comfortable than hien, so i thought like why bother with the "roughest" pad for non work?
non gaming*
elder dune
Ayy sick W2HE mods. Did you get the foam lasercut? Our prototype case is machining Mon/Tues, I think you will be interested ;). https://discordapp.com/channels/167181566978555904/984799440072220692/1174862504237744178
fringe torrent
and btw why specifically a hien in small? i tried otsu and zero and i'm pretty s...
hien is also pretty durable
elder dune
do they still put the damn charge port underneath?
fringe torrent
do they still put the damn charge port underneath?
idle pier
this is atrocious to look at
fringe torrent
this is atrocious to look at
s tier setup
idle pier
and i still dont understand why hien LMAO
harsh dove
best mouse
quiet bay
How does this look
elder dune
S tier RSI mouse lol. I just can't gel with them at all. But I'm one of those weird guys at the LAN who uses a production trackball lol
fringe torrent
How does this look
digging the high contrast black and white
harsh dove
How does this look
your spacebar annoys me but otherwise its good
atomic plaza
How does this look
It looks very good but the spacebar is weird 😅
quiet bay
I use reverse spacebar 
untold wigeon
the spacebar tf
fringe torrent
S tier RSI mouse lol. I just can't gel with them at all. But I'm one of those we...
since i ftip a lot i actually dont mind the apple mouse tbh my biggest issue with it is the polling and the bad performance
idle pier
How does this look
this looks sick but whats going on with the spacebar here?
quiet bay
damn u guys are roasting my reversed spacebar
fringe torrent
i once tried the mx master 3 besides the shape being super uncomfy for me it was the performance that got to me the most in use
i love reverse spacebar in use
so comfy
untold wigeon
damn u guys are roasting my reversed spacebar
elder dune
since i ftip a lot i actually dont mind the apple mouse tbh <:KEKW:8692951896745...
my biggest issue was using the scroll, it wasn't so good for my hand size. Interesting though I don't see gamers using them
elder dune
it looks so whack lol but hey whatever works
fringe torrent
i think it just comes down to where you rest your thumb
it looks weird but it works
idle pier
it looks so whack lol but hey whatever works
honestly i kinda dig the look
goes well with that black & white theme, only keycap to not have that white or black arrow is spacebar so might as well do something fun with it
(you can tell i dont mod keyboards)
elder dune
honestly i kinda dig the look
i guess I need to see it more, it's new to me and I'm not used to it at all. But yeah everyone has different posture etc
LOL yeah same. cases yes, caps not so far haha
fringe torrent
@quiet bay photo taken with the phone ?
quiet bay
ye
harsh dove
fringe torrent
i keep debating if i should switch back to the LP arm
fringe torrent
i have both rode arms and the lp
untold wigeon
the carbon fiber desk go hard
idle pier
bro is optimum tech in person
fringe torrent
you need a carbon mouse to go with the desk
fringe torrent
I would literally buy the m3k just to have it in the background
they sold like 5 prototypes earlier
fringe torrent
they went in like 3 seconds
fringe torrent
500euros each
quiet bay
wth
untold wigeon
oooffooffooffof
quiet bay
500 euros...for a prototype
harsh dove
Kinda crazy but also not surpised
untold wigeon
for 500€ i could buy like 2 bigmacs
harsh dove
Yes
fringe torrent
looks so good
harsh dove
Thank you I appreciate that
fringe torrent
i think BT has them on his wooting
harsh dove
I feel like I should know who BT is
fringe torrent
harsh dove
Ah yes
Yeah
Damn I see what he did with his shift
I got the novetlies too
Might have to copy him
Lmao
fringe torrent
really clean set
harsh dove
I like the red esc tho
quiet bay
Im making my friend a keyboard with that keycap set except they're clones
fringe torrent
iv been meaning to add an artisan to my wooting
harsh dove
Are the clones PBT?
quiet bay
ye
harsh dove
Thought so
quiet bay
dye-sub pbt
quiet bay
idk what artisan keycap would go well with my keycaps
it looks fine as it is but
I could add something more
elder dune
is there anything missing from the aluminium/brass key cap market? curious. We could look at doing something Wooting specific
fringe torrent
not sure tbh
when it comes to metal keycaps tho i really like what salvun is doing
elder dune
wow cast and machined I guess?
elder dune
they are beautiful
I think we'd have to stick with e.g. alu+brass finger caps machined, the salvun stuff is outside our area of expertise.
fringe torrent
I think we'd have to stick with e.g. alu+brass finger caps machined, the salvun ...
what kind of stuff do you make now?
elder dune
3d printed containers are awesome though
We are doing our first case for the W2HE. We normally make high end lasers for show use, you've probably seen them before or lasers based upon our invention.
just had the volume control PCB prototype finished on sat lol
harsh dove
fringe torrent
thats quite the change tho from lasers to keyboard case
harsh dove
Swapped novelties
elder dune
Yeah but in the end of the day it's all down to machining and electronics which we do all day long
I bought a W2HE and went looking for cases, realised there are none so.. if no one else is going to do it (wooting dont have time) why not us
loud zephyr
noicee, changing up keycaps feels like a new kb
harsh dove
Haha right
loud zephyr
I'd love to see someone flame patina that accent piece
elder dune
slick combo
harsh dove
Yeah I’d like to see some custom inserts for the accent
harsh dove
slick combo
Thank you 🙏🏽
elder dune
that red enter gives the old school + new vibe
fringe torrent
I bought a W2HE and went looking for cases, realised there are none so.. if no o...
cant wait to see the end results
elder dune
cant wait to see the end results
you saw the prototype from Friday already eh?
3d+brass
fringe torrent
might of missed it
fringe torrent
looking good
elder dune
thank you! its getting a volume contorl option too ;D
loud zephyr
This is the rabbit hole within a rabbit hole I wish I didn't get into; artisans are bad for your health. Not my collection but damn some sculpts are fire
fringe torrent
imagine the alumaze coming in these colours
loud zephyr
The pink and aqua are pretty
fringe torrent
This is the rabbit hole within a rabbit hole I wish I didn't get into; artisans ...
those look so nice
loud zephyr
the Bongo cats are hella cute
fluid ravine
@quiet bay can you take a picture on how you position your boom arm
fringe torrent
thats something i need to do is find a new spot for my boom arm
fluid ravine
how much is that mic again
quiet bay
how much is that mic again
I remember getting it for 110 on sale
elder dune
imagine the alumaze coming in these colours
they are all possible to a point. but anodisation varies lots between batches in most colours so that's the issue
fringe torrent
they are all possible to a point. but anodisation varies lots between batches in...
it could be cerakote
elder dune
I think some of the alumaze colours were yes
fringe torrent
I think some of the alumaze colours were yes
3 were ano and 1 was mao
harsh dove
Making me want this mobo now after taking some photos of my pc lol
Would suit it better than this damn dragon
quiet bay
gyat
fringe torrent
Making me want this mobo now after taking some photos of my pc lol
it also gives off prada vibes
fringe torrent
harsh dove
is yours the hero?
fringe torrent
ye
fringe torrent
z690
harsh dove
oh ok
fringe torrent
intel
harsh dove
yeah
elder dune
paint it ;D
fluid ravine
quiet bay
damn urs is right in ur face
fringe torrent
i use to have my mic in this spot
harsh dove
@fringe torrent
Kinda feel like the Intel variant looks better slightly
This is the am5 one
elder dune
i use to have my mic in this spot
looks like a tiny mouse
fringe torrent
Kinda feel like the Intel variant looks better slightly
i think a lot of the times the intel boards look nicer tbh
elder dune
yeah and they usualy put on the intel tax too
fringe torrent
looks like a tiny mouse
even smaller mouse
elder dune
even smaller mouse
how on earth do you use it :o?
quiet bay
finger tip
elder dune
the ergo is doing my head in lol
elder dune
i guess you have desk perfect height for it
fringe torrent
think of like your normal mouse but only the finger contact areas are actually touching
and the mouse weighs barely anything so its easy to move
elder dune
wow okay, totally new to me I'll have to try it one day. TBH full size trackballs are sorta similar, fingers do all the work
fringe torrent
wow okay, totally new to me I'll have to try it one day. TBH full size trackball...
this is the company who makes it https://zaunkoenig.co/
and what it looks like
marble shuttle
It is too much for cable mouse imo
fringe torrent
i personally dont think it is
elder dune
wow that's quite impressive. I was reading about how they did their cables, they go all in. Love it
fringe torrent
they're all about performance and going for the lightest weight
also carbon fibre for a mouse shell is just amazing to touch and hold
elder dune
yeah I'd love a brass/CF/etc trackball housing for this reason.
plastic all day is tiresome haha
how much is the Zaunkoenig?
fringe torrent
so the m3k when it comes out will be 340 euros
quiet bay
harsh dove
So I need new motherboard and new mouse for aesthetic purposes
Narisa is making me spend money
quiet bay
I also need a new mouse for aesthetic purposes. 😄
fringe torrent
Narisa is making me spend money
lunar sand
Cus to me it's really not ;-;
That’s very personal. Ergonomics wise yes. Too close. But each individual has different needs and expectations
fluid ravine
That’s very personal. Ergonomics wise yes. Too close. But each individual has di...
hmmm ig so
fluid ravine
That’s very personal. Ergonomics wise yes. Too close. But each individual has di...
how far is it usually
lunar sand
Google it 🙂 there’s an equation for that 😜
fluid ravine
cus usually when it comes to guides
they say they recommend to have like one fist away
so i did that
elder dune
lol yeah all depends on the screen PPI and diagonal size. My 48" oled will be almost 1m distance
harsh dove
Yeah the average recommendation for monitors is 5 degree upward tilt, eyes should be level with the top of the monitor bezel when sitting up straight and monitor should be approximately one arms length away from you
fringe torrent
monitor on the arm so can change it depending how im sitting
harsh dove
Narisa sits like a pretzel in their chair lol
fringe torrent
Narisa sits like a pretzel in their chair lol
depends on the chair
harsh dove
Haha , I just figured with you saying “depending how I’m sitting” I can imagine some type of Slavic squat position in your chair lol
fringe torrent
sometimes im like one foot up , sideways , cross legged , normal
fringe torrent
iv disappointed arden 
fringe torrent
You ever seen death note? <@117261989021089798>
i dont watch anime at all
harsh dove
i dont watch anime at all
Oh okay
I was gonna reference how a character sat in that show
normal schooner
harsh dove
Lmao
fringe torrent
harsh dove
Basically
fringe torrent
i wore out one of my chairs on the left side from sitting with 1 foot/leg up
like you can see the plastic under the foam
normal schooner
fringe torrent
its not that bad 
fluid ravine
The distance from your eyes to the monitor has a ratio
That's on my dad to choose
fringe torrent
the armrest seen better days tho
elder dune
kek
normal schooner
t3nz have u been playing valo?
elder dune
i can smell that from here xD
untold wigeon
That’s horrible
fringe torrent
its what happens when you dont sit in chairs properly
untold wigeon
cursed armrest
I would send you mine
But it's beyond anyone imagination
Both my arm rests broke so I taped them back together
true geyser
its what happens when you dont sit in chairs properly
Or if you chew on them every now and then
fringe torrent
Or if you chew on them every now and then
never tried that whats it like ?
true geyser
never tried that whats it like ?
Surprisingly addictive
fringe torrent
fleet gull
hello friends! completed build. So happy I went with the grey Tofu60 Redux, goes so well with the JTK Sakura Night caps.
untold wigeon
Itadori keyboard
quiet bay
welp
looks like whoever got my wooting uwu is not giving it back
I hope they take care of it
fringe torrent
quiet bay
I hope wooting sends me a replacement 😭
urban kraken
hello friends! completed build. So happy I went with the grey Tofu60 Redux, goes...
Bro has a rug for mousepat
harsh dove
I hope wooting sends me a replacement 😭
Damn
fluid ravine
looks like whoever got my wooting uwu is not giving it back
someone help get le uwu back
stable kindle
@fluid ravine Yo yo, king of thoccin thoccness
fluid ravine
<@755503622728450269> Yo yo, king of thoccin thoccness
wasssaap
stable kindle
does adding mods like bandaid, burger, etcc... add any squish to the board?
potential performance issues
well not issues
differences* i think is a better word
and if the module is coming out next week was wondering if you could look over my list to see if i have everything covered
ok then 😦
fluid ravine
sorry mate
stable kindle
im just jk !
stable kindle
o shit hopefully it aint on your setup
fluid ravine
does adding mods like bandaid, burger, etcc... add any squish to the board?
define squish
fluid ravine
and if the module is coming out next week was wondering if you could look over m...
sure sure
stable kindle
linear60 has a 40cN start
lets say i add foam + tape + burger + etcc
would it be possible that all those mods could cause the switch to require a higher force than 40 cN before moving?
and would i even notice
fluid ravine
would it be possible that all those mods could cause the switch to require a hig...
nope
what every happens in a switch stays in a switch
sacred jay
would it be possible that all those mods could cause the switch to require a hig...
dont think so
stable kindle
kk im guessing its so negliable that we wouldnt notice then
fluid ravine
The only thing that would change it is using different weight springs
oh and ceramic keycaps
since they're heavy
increase weight which means pressing on the keys make them lighter
stable kindle
so with the halleffect switches im guessing ceramics arnt recommened
fluid ravine
so with the halleffect switches im guessing ceramics arnt recommened
oh no they're fine
fluid ravine
just keep in mind that the weight from them can make it easier to press
stable kindle
hmm gotcha
fluid ravine
L60's are recommended when it comes to it
quiet bay
I want cerakeys ngl...
stable kindle
how much are they usually?
fluid ravine
I want cerakeys ngl...
i just want the blanks i want :P
quiet bay
ima wait for them to be able to do custom keycaps...oneday
stable kindle
or are they wildly differect like the plastics
stable kindle
i just want the blanks i want :P
i wanna find a set of blanks that are black, but like awhite enter and esc key
but i cant flippin find em
stable kindle
https://www.cerakey.com/products/full-set-v2?variant=41532871377035
thanks
shrewd hatch
i wanna find a set of blanks that are black, but like awhite enter and esc key
might have to just buy a set of blanks then get those 2 white seperate and replace them
fluid ravine
stable kindle
@fluid ravinehttps://drop.com/buy/drop-dcx-white-on-black-keycap-set?defaultSelectionIds=979573
fluid ravine
stable kindle
something like these but blank
fluid ravine
<@664985532564111360> https://divinikey.com/products/enjoypbt-blank-keycap-set?v...
^^
stable kindle
stable kindle
i get it, buying two sets of these
would be cheaper than buying one of the PBTfans
fluid ravine
just take a look at this https://divinikey.com/products/enjoypbt-blank-keycap-set?variant=40266334961729
and i will try to find a set of blank modifiers
oh no
they're sold out
i just noticed
stable kindle
DCX vs cherry profile?
fluid ravine
D:
stable kindle
D:
similar enough?
ive been using the cherrys on my 10+ year old corsair keyboard
i dont something too different
fluid ravine
brb gonna get food
stable kindle
kk, ill type up that list
thanks for all the help youve given me over the month+
appreciate it
fluid ravine
thanks for all the help youve given me over the month+
no problemo
stable kindle
thanks man
didnt know that cherry progfile was also called gmk
looks like its bout the same
slate jolt
Hi yall, trying to put my wooting back together with a new tofu60 redux
Having trouble screwing the PCB back to the foam and plate. Are the stabilizers supposed to be against the PCB?
PCB goes on top?
loud zephyr
plate on top of pcb
harsh dove
Stabs are plate mount
harsh dove
Yeah my brain paused for a second too
slate jolt
Idk if I’m reassembling this wrong lol
stable kindle
you finished eating already? ?????????????
stable kindle
what kinda pizza?
fluid ravine
went to the restroom and clean my hands
fluid ravine
what kinda pizza?
domino supreme
harsh dove
fluid ravine
but when i saw the image i was tripping
slate jolt
Like did I put my stabs on wrong
stable kindle
domino supreme
supreme is the way
harsh dove
Right
fluid ravine
ah haha
slate jolt
But now I’m having a problem attaching the plate to the PCB?
harsh dove
Then foam underneath the plate
fluid ravine
you put the foam on the top
harsh dove
Then PCB
slate jolt
Because there’s a lot of room and the screws don’t reach
fluid ravine
it goes underneath
slate jolt
Ty
cinder merlin
so with the halleffect switches im guessing ceramics arnt recommened
it works, I am using them rn. U just need to not fully press down the space bar when u attach it initially
stable kindle
@cinder merlinpics or fake news
@fluid ravine saw some posts the other day where people recommened slightly larger O-rings as well
can you link me your fav build?
high saffron
whend they get fr4 for wooting?
fluid ravine
<@755503622728450269> saw some posts the other day where people recommened sligh...
what kind of orings
high saffron
and i finally finished my wooting, attempted adding new things but i gave up cause it didnt help
stable kindle
what kind of orings
silicone O rings for the burger mount
fluid ravine
silicone O rings for the burger mount
yeah...
i havent really been up to date with burger mounting so i wouldnt know
stable kindle
gotcha
fluid ravine
but if i remember correctly
the bigger size of those orings were
4mm 1.5mm 1.5mm
im not sure but out of the back of my mind it was that
stable kindle
so the thocc king doesnt do burger mount?
fluid ravine
so the thocc king doesnt do burger mount?
nope
fluid ravine
The king uses Gummy O'ring Mount
stable kindle
the fk is that
fluid ravine
any particular reason?
I mod my wooting alot
every day
taking it in and out
after realizing this is alot of work
decided to switch to gummy oring mount which gaves me better benefits
fluid ravine
the fk is that
a large oring that goes around the pcb
fluid ravine
then using a mount called friction mount
fluid ravine
(tray mount->gummy mount = friction mount)
fluid ravine
im taking notes
👍
fluid ravine
Wooting Lubricant Kit has lube for switches and stabs so you dont need to buy grease
high saffron
i find grease too thick and makes the response on stabs slow
fluid ravine
i think it was M2 6mm or 7mm screws
fluid ravine
i find grease too thick and makes the response on stabs slow
gotta work the lube in
it will settle over time
i just spam it for a few and it will sound good
high saffron
man
stable kindle
thank you man
high saffron
yeah i got time yesterday to do the switch tape mod and it was just pain so i wanted immediate results
high saffron
im using stock case instead of the redux i got cause i carry this thing everywhere and i dont wanna break my back
fluid ravine
Dont get switch films, waste of time, does nothing (in fact it makes the switch higher pitched)
Stabilizer mods you can do = Lubing Stem and housing with krytox 205g0 (in lube kit), grease on wire (in lube kit), holee mod (optional), bandaid mod (optional)
harsh dove
i think it was M2 6mm or 7mm screws
m2x5mm or m2x6mm
slate jolt
Damn I’m still having trouble screwing the PCB into the plate. From the back of the PC I’m looking at a
Plate on the bottom, stabilizer wires face up
Foam in the middle
PCB
But the silver screws won’t reach? Do I gotta just try and force it through?
high saffron
but l45s with switch tape mod, pc plate with silicone pad + sorbothane sound dampening is amazing
fluid ravine
Damn I’m still having trouble screwing the PCB into the plate. From the back of ...
wait...
did you buy the standoff kit
high saffron
yall talking about smkeys plates?
harsh dove
uxcell Silicone O-Rings, 4mm OD... https://www.amazon.com/dp/B082STN4LT?ref=ppx_pop_mob_ap_share @stable kindle
Orings for burger mount
slate jolt
did you buy the standoff kit
Hmm
fluid ravine
yall talking about smkeys plates?
swang bought the plates from kbdfans
harsh dove
https://graveshift.com/products/graveshift-m-o-rings @stable kindle for gummy mount
slate jolt
I bought the tofu60redux and added the option for the plate with the brass weight
fluid ravine
I bought the tofu60redux and added the option for the plate with the brass weigh...
please tell me you got the kit
harsh dove
Yeah you need a standoff kit
fluid ravine
m2x5mm or m2x6mm
im pretty sure the ones that comes with wooting uses 5mm
stable kindle
ill order the 6mm
fluid ravine
(i measured by eye so im not sure myself)
cinder merlin
@stable kindle
slate jolt
Where can I find the standoff kit??
slate jolt
Idk it didn’t say I needed anything else
fluid ravine
👀
fluid ravine
he didnt buy the standoff kit
harsh dove
Can’t remember but I’m just referring to this
stable kindle
the fk is a standoff kit
high saffron
yeah just search up kbdfans standoff kit
stable kindle
k
fluid ravine
you need to buy the standoff kit to screw in the pcb to the plate that smk and kbdfans makes
kbdfans sell the standoff kit
high saffron
stable kindle
@fluid ravineur saying if i buy the 60 redux, and and the m2-6mm to screw in the module
high saffron
yeah if you take a close look at the wooting’s plates compared to smkeys and kbdfans youll see the built in standoffs on the wooting plate
slate jolt
Is it
fluid ravine
<@755503622728450269>ur saying if i buy the 60 redux, and and the m2-6mm to scre...
no to screw the module into the case
stable kindle
i also need to buy the satnd off kit?:
fluid ravine
naw
slate jolt
Nothing comes up
stable kindle
o
high saffron
sorry @slate jolt i pasted link above
stable kindle
so why does this dude need to buy it compared to me?
high saffron
https://kbdfans.com/products/kbdfans-m2-3-countersunk-flat-head-screw-kit this o...
@slate jolt
slate jolt
Thanks? This is needed for the Tofu?
fluid ravine
i also need to buy the satnd off kit?:
the plates that kbdfans and smk makes has holes that are required to use when it comes to screwing the pcb and plate together.
The module that you are buying (from wooting) they made their plates with the standoffs so you dont need to buy the kit from kbdfans
stable kindle
ahh gotcha
fluid ravine
the m2x6mm screws are for your case
stable kindle
thanks for the break downm
slate jolt
Ahh
fluid ravine
where you screw in the module into the case
high saffron
the plate screws onto the pcb, and the pcb screws onto the case
slate jolt
Ok cuz the plate did come with these small silver standoffs
And small black screws
But I thought it was for the case
fluid ravine
but if you're me
using gummy mount
you dont need screw
you just insert the module with the gummy oring and you're done
harsh dove
My gummy rings will be here tomorrow
high saffron
so without the kit the plate is actually just sitting on the pcb, held by the switches grabbing on the pcb
harsh dove
My gummy rings will be here tomorrow
Got delayed by two days
slate jolt
Wait
harsh dove
slate jolt
Is this the standoff kit???
fluid ravine
https://discord.com/channels/167181566978555904/1173784544529363034 ( my logs for Alu case + Switch Tape Mod Guide; also found in #🪛│modding_faq )
https://discord.com/channels/167181566978555904/1166204178759176283 (My logs for Stock case + discussions that you can find)
https://discord.com/channels/167181566978555904/1121619438903513099 (my original/first log)
fluid ravine
https://discord.com/channels/167181566978555904/1173784544529363034 ( my logs fo...
@stable kindle if you're looking for inspiration from me or anything here ya go
slate jolt
Ok I’ll tinker with it
fluid ravine
If you ask me, which case would i prefer: plastic or aluminum
In terms of Thock, plastic
In terms of quality, def aluminum
if I were to have 2 wootings
I would have one in alu and the other in a nice looking plastic case
would be great
harsh dove
Glad you got it
fluid ravine
Got my PCB attached to my plate, ty <@755503622728450269>
good job
sorry about getting mad
anyways
test if the switches works fine
cus we worry about the flex cuts
cinder merlin
i wanna find a set of blanks that are black, but like awhite enter and esc key
U can do that with cerakeys if u do mx set. But spaces and stuff will also be white
eternal raft
@fluid ravine hey mister! I had a few questions
Im gonna get a wooting soon and one for a family member as a gift soon
(im going for a white alumaze n keycaps unless there are other recommendations) with a pc switch plate set from wooting
I don’t see the gold one like @slate jolt has above
was also planning to personally use the one for me in a tofu 60redux case
and a wooting travel case (to put the gift in)
I know how to lube switches n what not but thats as far as it goes and standard foam im pre clueless abt the rest
the person im building one for is also used to an iso layout.. was thinking of making them switch to ansi since there were no other plate switch options
fluid ravine
the person im building one for is also used to an iso layout.. was thinking of m...
so whats the question
eternal raft
what plate modding / what mods can I do that isn’t things like bandaid
other than mentioned above
esp if its an ISO layout
fluid ravine
<@755503622728450269> hey mister! I had a few questions
Im gonna get a wooting ...
The one that Swangson has is the FR4 plate from KBDFANS.
fluid ravine
what plate modding / what mods can I do that isn’t things like bandaid
so you're asking for some basic or simple mods that you can do with any other keyboards
gaunt linden
Does someone have a setup for tarkov? Like keybinds and such
true patrol
anything special to keep in mind when looking for switch films?
gaunt linden
anything special to keep in mind when looking for switch films?
Thickness
true patrol
sorry, I more meant "as compared to mx switch films"
as in, will mx films from TX/THICC/Deskeys work
gaunt linden
https://keebmat.com/products/thockfilm has anyone tried these ?
marble shuttle
https://keebmat.com/products/thockfilm has anyone tried these ?
I will buy this next month they are saying slicone films fits the switch
gaunt linden
Yea me too
untold wigeon
Buying them right now
When they arrive I'll update yall
I wonder if the poron would be better though
scarlet rock
whats the difference between silicone and poron for that
i want like a muted deep thock
untold wigeon
Well technically one is 0.1mm thicker
But I mean
Is that really going to make a huge diff
Most probably not
shrewd hatch
@untold wigeon pls let me know how it goes 🙏
fair mountain
https://keebmat.com/products/thockfilm has anyone tried these ?
They are planning to release a lekker version in about 2 weeks
flint tiger
https://keebmat.com/products/thockfilm has anyone tried these ?
i did saw a youtube video about people modding wooting with firm, but you can only heard the sounds and dont know if theyre good or not
scarlet rock
Buying them right now
which one did you get
untold wigeon
i got the 0.3mm poron
we will see how it goes
but the shipping to me is legit like
6-18 buisness days
sand oasis
Does someone have a setup for tarkov? Like keybinds and such
i didnt use anything special for the wooting for kebinds
just used the usual tap for inspect hold to fix malfunction
but i havent played much tarkov this wipe
cyan adder
https://keebmat.com/products/thockfilm has anyone tried these ?
i just received them this morning !
I’ll install them tonight when my kid will sleep, will give you an update
But my keyboard is already thocky btw
marble shuttle
you have kids
scarlet rock
But my keyboard is already thocky btw
do a before and after sound test for us
marble shuttle
i boughty slicone one but unfortunetly i have cancel my order i needm oney
cyan adder
okay dont buy it
they have à adhesive part
kinda hard to get it to stay in place
also im dumb but there is no adhesive mentionned in the details of the product on their website
its realllllly hard to install
And the QR code on the package to the manual is a dead link… I’ll e mail the seller so maybe he can send me a manual in pdf
tall blade
anyone bought a type of foam?
scarlet rock
And the QR code on the package to the manual is a dead link… I’ll e mail the sel...
There should be pics on the website for where each of them goes
cyan adder
There should be pics on the website for where each of them goes
even with the pics
tbh since there is 0 sticky part this is tricky asf to install
scarlet rock
That would be annoying to install if there's no adhesive
glad ruin
If my keyboard doesn't make Mac and cheese noises I don't want it.
cyan adder
Actually it’s the worst product I’ve ever bought for my wooting. Wasted 10€
marble shuttle
Switch films ?
Did you tried
It has to be reduce to stem woble btw if its work iam okey with that
cyan adder
all the 3 product are bad
switch films, pcb pads, and plate pads
and if you look more deeply; there is 0 people saying that its good actually, even on reddit
i wont recomend you to buy it
and it reduce nothing actually
ill try to figure out a way to use it but... i am really disappointed
harsh dove
Yeah I remember Bad Seed Tech saying Switch Films weren’t good on Lekker switches and in general
Btw good morning
crimson sky
depending on the switch they can be good 
I had some switches that absolutely needed filming
(specifically old cherry ones)
harsh dove
Yeah , I think he was mainly referring to the difficulty of putting them on
crimson sky
ah
well idk about those
in general I feel like people overstate how difficult it is to apply films
harsh dove
Right yeah me either
crimson sky
lekker is a special case tho
harsh dove
Yeah
marble shuttle
Lekker are ass i dont think the switcj films are bad
cyan adder
Literally 0 changes in sound
marble shuttle
Maybe slicon will be different
lethal dove
Literally 0 changes in sound
sound is debatable, but I did notice a lof of housing wobble after opening my lekker switches for lubing. was so much that the 0.125mm films didnt even get rid of it completly, so I went with 0.150mm which made the housing tight again. Sound didnt change much in my opinion but the stem wobble is reduced a bit because the top housing doesn't move anymore.
TX 0.150mm were ok to install, a little bit more fiddly than on normal switches, but I only had to reopen about 3-4 switches where the films didnt sit right the 1st time
cyan adder
sound is debatable, but I did notice a lof of housing wobble after opening my le...
i was speaking about the thock film from keebmat which are really bad manufactuired and bad quality actually
i have no doubt TX films helped since there were many people testing it and feeling it good with the wooting atm
lethal dove
i was speaking about the thock film from keebmat which are really bad manufactui...
ah ok, thought you were talking about films in general for the lekker switches
vivid lintel
I was thinking about modding my wooting but I’m not sure if I should
untold wigeon
its worth it
polar girder
Agree
Aluminum case, pc plate and hand lube job
Set of keycaps if you want to get fancy
untold wigeon
why the box smell tho
harsh dove
Cause your upper lip
untold wigeon
:[
polar girder
Nice
fathom rune
Day #39 of asking, where is the module?
harsh dove
Day #39 of asking, where is the module?
Day #39 of the module being delayed by 25 hours every time someone ask
Module has now been delayed by approximately 1,025 hours
And yes the math is not mathing, we added 50 hrs as interest
fathom rune
And yes the math is not mathing, we added 50 hrs as interest
good delay it even more
harsh dove
In all seriousness, is should be announced this week or next
So get your wallets ready
fathom rune
they been ready for 2 months 😭
tall blade
any of you do the tape method for dampening the sound?
crimson crown
