damn u got me kinda concerned now, ill probably open it back up and remove the wooting foam then 😭
#🔧│keyboard_modding
fringe forge
polar girder
I mean thock isn’t created
It’s funneled
Well any sound is created at the switch
Everything else is about channeling the sound waves
fringe forge
kinda want some other opinions first tho, if its fine having the wooting foam along with the tofu foam in the redux
do let me know if anyone reading this has a redux
polar girder
Well it’s fine until it’s not fine lol
stray tiger
Acrylic cases arent really a great choice for deeper sound though if thats what you're after.
stray tiger
kinda want some other opinions first tho, if its fine having the wooting foam al...
If the keyboard is working fine and continues to work fine after long sessions, then you should be good. Even though the heat generation is low, things like LED's and IC's do get hot when being used, especially at bright LED's and faster settings.
purple Tofu60 with led heat marks after a years use. This wasnt with a 60HE PCB, but the same principal applies
marble shuttle
Damm
fringe forge
oh shittt
yea lol imma take the extra foam out
not worth risking the keyboard just for some sound improvement
stray tiger
Try adding the wooting foam by itself and you can use the piece you ripped off the top to fill in the battery cavity if you didnt get the brass weight
fringe forge
ah i have the brass weight
so that wont work
maybe ill use the wooting foam instead of the tofu foam
stray tiger
Then just use the 60HE foam, you dont need the extra
fringe forge
cause the tofu one is really thin
stray tiger
yeah
fringe forge
i think ill still need to squeeze it a bit
cause the screws arent raised like they are on the wooting case
polar girder
I skipped the brass weight cuz I was scared it would be too heavy actually. But wondering if maybe I should have got it just to experiment with .
Guess I’ll figure out once redux arrives
fringe forge
I skipped the brass weight cuz I was scared it would be too heavy actually. But ...
nah the case is really heavy to begin with
stray tiger
You might even like it better with just the 60HE foam. I dont even use foam in my aluminum cases, I usually use fiberfill
fringe forge
i wouldnt recommened brass weight
stray tiger
cause the screws arent raised like they are on the wooting case
You installed the standoffs right?
stray tiger
You can use the 60HE screws too. Same thread/pitch size
polar girder
Right on ok yeah that’s kind of what I was thinking. Like I still want to be able to move it around but just never move while I’m gaming
fringe forge
Right on ok yeah that’s kind of what I was thinking. Like I still want to be abl...
oh it wont move without the brass weight
dont worry
polar girder
🥰
fringe forge
You can use the 60HE screws too. Same thread/pitch size
yeah i used the 60he screws to screw the keyboard into the case
didnt have to use the ones that came with the case
polar girder
Stock one barely moves so that’s what I figured. Thanks
fringe forge
👌
stray tiger
Ok nice I’ll save my $20 then thanks lol
Im trying to save folks money all the time. So much wasted on unneeded mods because some guy on youtube gets referral link $$ to suggest products they used that cured keyboard cancer
fringe forge
You might even like it better with just the 60HE foam. I dont even use foam in m...
tbh, the tofu foam itself is so thin, i think its just that the wooting foam is too thick which is why we need to squeeze
if i install the wooting foam by itself, there wont be the same risks? or will the chances of any damage be just reduced a bit
cause there is still a need to squeeze
stray tiger
The wooting foam is open cell and squishy, you'll be ok if thats all youre using
fringe forge
alright, thanks 👍 ill see how much difference there is with and without the tofu foam
and ill update you
stray tiger
I like to record before and after so that I dont have placebo affect when doing a/b comparisons
fringe forge
alright got the wooting foam in and the tofu foam out
live review
sound is noticeably different compared to both foams in
albeit, not a massive difference
screwing it in was SLIGHTLY easier, still had to push a bit
all in all, not much difference to having the tofu foam in by itself
pine marsh
What thickness foam did you order?
sleek trench
sound is noticeably different compared to both foams in
got a sound clip to share? would love to hear 😄
fringe forge
What thickness foam did you order?
didnt order any, i was using both the stock wooting and the thin foam that comes with the tofu
pine marsh
Ah, okay, thank you for clarifying that
fringe forge
got a sound clip to share? would love to hear 😄
havent ever recorded a sound test, is it fine with my phone?
if so ill record and send within a few hours
sleek trench
havent ever recorded a sound test, is it fine with my phone?
yea thatd be fine! thanks
quiet bay
Yeah I used switch pads and tx films they work
weary tree
Yeah I used switch pads and tx films they work
Where would i find films that fit? i had a set but it didnt fit.
stray tiger
Where would i find films that fit? i had a set but it didnt fit.
There arent any that fit off the shelf. Some fit better than others but none fit perfect. You can 3d print some though
stray tiger
Where would i find films that fit? i had a set but it didnt fit.
Are your switch housing wobbling?
fringe forge
recorded using my phone, not 100% accurate to irl sounds
weary tree
it certainly could be better
fringe forge
the keypresses after 11 seconds start from top row and comes down to spacebar row by row
weary tree
especially after opening them up for lubing and such
fringe forge
@stray tiger what do you think?
sleek trench
<@189118524784902146>
thanks for sharing!
stray tiger
<@409738213297487874> what do you think?
I actually dont like the sound with both foams. Sounds very muted
fringe forge
i think wooting foam only is best of both sides
stray tiger
Keep in mind, sound preference is super personal. Someone else might love the sound with both 🙂
fringe forge
i like both foams sound, but its a pain to screw in so i dont wanna risk damaging anything
currently typing with on screen keyboard as i decide 
stray tiger
I think if it takes a good amount of compression/effort to screw it in with both pieces of foam, I'd avoid that
fringe forge
it does, takes some fiddling to get the screw into the hole
quiet bay
Where would i find films that fit? i had a set but it didnt fit.
Tx films
buoyant onyx
is there any update to the wooting module that i missed?
looked cool like a month ago but idk if anything was said about it
weary tree
im waiting on that module too
cyan adder
Yo my 60he is incredibly smooth as stock. I’ve heard they do have new process for factory lube months ago and I don’t feel like it would improve something hand lubing it myself, I’m a bit scared of overlubing.
Any of you have receive one from recent batch / last batch and noticed the same ? Or I can go without being scared
stray tiger
Yo my 60he is incredibly smooth as stock. I’ve heard they do have new process fo...
If you are happy with your keyboard as is DO NOT DO ANYTHING. Enjoy it and save yourself the time lost on chasing ghosts
pine marsh
If you are happy with your keyboard as is DO NOT DO ANYTHING. Enjoy it and save ...
Uhhhhhhhh…. Totally didn’t just purchase a lube kit. Whoops
stray tiger
Uhhhhhhhh…. Totally didn’t just purchase a lube kit. Whoops <:pepecry:6439732351...
Proper lubing wont hurt at all! No worries there. Im just saying if the factory lubed job is great, dont feel like you need to change it
pine marsh
Oh I see, thank you 👍🏽 since I got the full 2 HE, should typing on the big enter and a few number keys give me a good idea if I should lube anything?
Or do I test like the home row?
I’m sorry if this seems obvious, I’ve just never purchased a nice keyboard for work before
stray tiger
The 2HE is actually really well lubed. Just use the keyboard like normal and see what you think
pine marsh
Awesome, thank you 🙏🏽
fringe forge
Yo my 60he is incredibly smooth as stock. I’ve heard they do have new process fo...
mine came like 11 days ago, it was really well lubed
i still lubed it cause i wanted to, but i dont think u need to if you're fine with the factory lube
cyan adder
Do you feel any difff ?
fringe forge
its not worth the effort unless u really really want to
cyan adder
i love smoothness
would probably go for it then ahah
is that normal that my keyboard already thock as stock ahahah
fringe forge
yeah mine was too
cyan adder
never had a better keyboard before
fringe forge
the biggest difference i noticed was less scratchiness when lubed
sound wasnt too different
cyan adder
did u lubed only switches or stabilizers too?
fringe forge
only switches, but i wanna lube stabs too
my stabs were phenomenal out the box
like insanely well
didnt see the need to even touch them
still dont tbh
fringe forge
mine wasnt that loud, it was slightly scratchy
buoyant onyx
Yo my 60he is incredibly smooth as stock. I’ve heard they do have new process fo...
if you actually overlube switches they eventually even out and the excess lube goes to the bottom housing of the switches
it'll just feel a little bit sluggish for a bit after overlubing
so no need to worry
fringe forge
yeah thats what seems to have happened with my \\\\ switch
feels soft/silent and slightly mushy when you bottom out
cyan adder
if you actually overlube switches they eventually even out and the excess lube g...
then they would get stuck on the bottom housing? isnt it bad
fringe forge
no, it just feels kinda mushy
cyan adder
should i removed these overlube lube if i get to overlube it
fringe forge
like imagine pressing your key and when it reaches the bottom it doesnt feel solid but kinda soft
fringe forge
should i removed these overlube lube if i get to overlube it
yea u can just wipe off excess lube if you aren't happy with it
cyan adder
also do i have to go wootility everytime i wanna swap profile? kinda hard to type ingame with rapid trigger profile tbh
buoyant onyx
removing overlube is a bit difficult though lol
if youre really concerned about overlubing just lube the stems
fringe forge
also do i have to go wootility everytime i wanna swap profile? kinda hard to typ...
FN + a1 / a2 / a3
buoyant onyx
does anyone have files to a 3d printed tofu?
normal schooner
does anyone have files to a 3d printed tofu?
https://grabcad.com/library/60-case-1 this isnt a tofu but its gh60 which is usually compatible with wooting https://grabcad.com/library/60-case-1
mental hemlock
does anyone have files to a 3d printed tofu?
lmfao
normal schooner
no promisses
buoyant onyx
https://grabcad.com/library/60-case-1 this isnt a tofu but its gh60 which is usu...
this thing is at a 0 degree typing angle LMAO
granite current
purple Tofu60 with led heat marks after a years use. This wasnt with a 60HE PCB,...
Hm. Was planning to bandaid mod and maybe tape mod. Does this mean id have to redo it every year? (I never modded a keyboard before)
mental hemlock
this thing is at a 0 degree typing angle LMAO
why would you want to 3d print a case
mental hemlock
they're already hella cheap
buoyant onyx
why would you want to 3d print a case
unless i didn't look hard enough, the plastic tofu cases are sold out
mental hemlock
unless i didn't look hard enough, the plastic tofu cases are sold out
they're acrylic, not plastic
honest flume
Yea my wooting foam won’t fit in the redux case
buoyant onyx
they're acrylic, not plastic
let me look at those ones
weary tree
you can just preorder and once they are available they will ship
buoyant onyx
they're acrylic, not plastic
ali express n stuff sell acrylics for ~50 dollars
and i wanted actually a plastic one for cheap
like shockport had plastic tofu cases for 15 dollars
weary tree
it looks like a downgrade to me, the stock case looks better
buoyant onyx
for module if it comes out
mental hemlock
ali express n stuff sell acrylics for ~50 dollars
explain yourself because you're not making any sense
buoyant onyx
explain yourself because you're not making any sense
wanted to get a cheap tofu case to get module to work and the cheapest case option would be plastic
or if I could 3d print one it would probably be more affordable than paying for alu or acrylic
fringe forge
Yea my wooting foam won’t fit in the redux case
i just spent hours on this, the wooting foam has 2 piece, seperate the two pieces and you can put the bigger piece in instead of the tofu foam
that works
honest flume
i just spent hours on this, the wooting foam has 2 piece, seperate the two piece...
Yea I jusr figured it out, now I’m having a hard time lining the usb port on the case
buoyant onyx
just use the wooting case
but module only comes with pcb
weary tree
he wants this for his module
normal schooner
im sure u can get one for cheap on ebay
fringe forge
Yea I jusr figured it out, now I’m having a hard time lining the usb port on the...
look at the screw holes to help guide you
mental hemlock
he wants this for his module
his or hers?
weary tree
i dont care
fringe forge
they should be visible properly, and then see
buoyant onyx
im sure u can get one for cheap on ebay
ya maybe that would work too i didnt consider that
mental hemlock
save the money seiki lol
normal schooner
if ur from the benelux u can have mine for free
buoyant onyx
save the money seiki lol
by buying a plastic case?
buoyant onyx
if ur from the benelux u can have mine for free
ah thanks but i live in the americas i think it's a bit far
honest flume
look at the screw holes to help guide you
The space bar screw is hard to screw in wyf
Wtf
mental hemlock
by buying a plastic case?
my brother in christ. the module is going to cost near the amount of the wooting
save the fucking money for a redux lol or even a psd60
shell crown
Dude yeag it'll cost just the same
fringe forge
The space bar screw is hard to screw in wyf
make sure u aint doing anything wrong
shell crown
Max 40€ down
honest flume
make sure u aint doing anything wrong
The other screws go in, not the space bar one tho
buoyant onyx
i think pc and switches together would probably be like 90 or a 100 bucks
fringe forge
ye i used the wooting screws
honest flume
How did u screw them in order
buoyant onyx
pcbs are like normally 40 / 50 bucks and if wooting decides to make it expensive on it at max itll be 70
polar girder
Y’all some postulating mf’s
normal schooner
we sell the pcb in like if you break it for 95 usd iirc
we dont have logitech funds to mass produce
fringe forge
How did u screw them in order
any order works
buoyant onyx
i guess the ahll ssensor pcb really making it expensive
honest flume
All the screws can go in besides the space bar one wtf
buoyant onyx
an h60 from hineybush is 35 bucks :c
fringe forge
All the screws can go in besides the space bar one wtf
take it out, check everythings alright, nothing out of line
then pop it back in
try again
are u using the standoffs?
fringe forge
try using the one near the spacebar
normal schooner
Yes
dw if u miss 1 screw
its not going to walk
at least thats my opinion on it, tirade is the expert
tardy echo
does anyone have the new lekker switches and can anyone make a video comparing the two sounds?
polar girder
You don’t care about feel? Only sound?
Plus I only have old lube job l60 vs new lube job l45’s
Not fair
L45’s better tho
mental hemlock
@buoyant onyx
tardy echo
i do but no one has made a sound comparison video they only made videos on how they feel and act but not sound
polar girder
Not true
tardy echo
what
tardy echo
thank you
honest flume
Does this look right?
tardy echo
they sound almost the same no point to switch unless you want lighter
honest flume
take it out, check everythings alright, nothing out of line
Did it
Is the port a bit off? Or is it just me
Someone double check
tardy echo
its a bit off its closer to the top
honest flume
How do I fix it
polar girder
Lol what
mental hemlock
slightly closer to the top, still looks fine
tardy echo
How do I fix it
why does it matter
honest flume
It was kinda hard to plug in
fluid ravine
im home :D
tardy echo
you doen't stare at it when u use your keyboard
polar girder
I would consider it perfect and just never look at it again
mental hemlock
you doen't stare at it when u use your keyboard
stop saying shit that doesn't help
fluid ravine
what we talking about
polar girder
Delete that picture that’s not straight on and move on with life lol
fluid ravine
i feel like someone here is being a dumbah
polar girder
Or tighten screw. Up to you
fluid ravine
polar girder
Does this look right?
Hole anxiety @fluid ravine
mental hemlock
need ur help
fluid ravine
need ur help
wassup
tardy echo
stop saying shit that doesn't help
its legit a port why should it matter
fluid ravine
my delete key sounds hollow as fuck lol
yeah your orings prob fucked
polar girder
Because nothing we do here matters lol
tardy echo
true
polar girder
And that’s the point.
fringe forge
u cant get it perfect
mental hemlock
Because nothing we do here matters lol
wym
fringe forge
its gonna move when u screw it in
polar girder
Obsession for the point of obsession lol
polar girder
Like I already bought a Wooting
tardy echo
it does matter in a way
how does it matter
polar girder
I don’t need to spend another $500 to have the same Wooting lol
fringe forge
stop saying shit that doesn't help
they have a point, if its slightly to the left or right who cares if it plugs in just fine
polar girder
I’m not hating. Just saying
fringe forge
u aint lookin at the port when the cable is in
tardy echo
^
polar girder
Obsessing about minutiae like this is fairly masturbatory
Same thing audiophiles and the like
mental hemlock
it's good to know it will work well
polar girder
It will lol
tardy echo
its still going to work well lmao
fringe forge
mine was slightly to the right, but cable plugs in just fine and its hard to get perfect since it moves when u screw the keyboard in
polar girder
Well your o-ring this is maybe diff. I was talking mostly about the port
fringe forge
if u worry about this you're gonna go crazy over whether ur left side gap is larger than your right
fluid ravine
@mental hemlock what orings and screw
fringe forge
gg, time for refund email wooting ASAP!
polar girder
Then why you worried about where the port is located lol
fringe forge
u gotta push
honest flume
I can’t fit
tardy echo
is the cable plugged into your pc?
fringe forge
is the cable plugged into your pc?
lmfao
fluid ravine
take the module out
plug it in and see if it works
fluid ravine
LMAO
polar girder
Only one way to make it perfect
fluid ravine
lel
fluid ravine
totally know waht yall are talking about
fringe forge
Does this look right?
this
fluid ravine
yk what? just use the keyboard with no case
i did that before
tardy echo
just screw it in the position you want it on the desk and boom solid keyboard
fringe forge
i did that before
tbh i tried it with no case today it sounded pretty good
fluid ravine
before i got my gasket ring
fluid ravine
tbh i tried it with no case today it sounded pretty good
ongg
my standoffs in my case are fucked up
honest flume
…
fluid ravine
so i couldnt do burger mount anymroe
polar girder
Ong ong
honest flume
Okay
polar girder
Burger desk mount
fluid ravine
LMAO
fringe forge
like kevone said, drill the whole keyboard into your desk
polar girder
5 head
fluid ravine
ONGGG
fringe forge
desk mount
fluid ravine
LEL
fluid ravine
did you do it
honest flume
Doing it now
fluid ravine
?
polar girder
Plug it in bro
tardy echo
Doing it now
you gotta push
polar girder
fringe forge
it looks aligned, it should be fitting
fluid ravine
you gotta push
doing what i told him
fringe forge
u kinda gotta push
polar girder
Lol ok sorry. Idk but the center thing isn’t issue. Maybe it’s too far back but I don’t see that be issue either
tardy echo
doing what i told him
good
polar girder
Find out where the friction is
fringe forge
i put it in before but it didnt turn on, you gotta put it in with some force
not too much that u break the keyboard tho
fluid ravine
make sure the pcb is still working
then try to figure out why it aint working in the case
polar girder
Well sounds like they can’t plug it in
fringe forge
if u damage the pcb cause of ur own modding, is warranty void
fluid ravine
and stop trying to complain the damn thing to be a few millimeters off
polar girder
Like is it fully plugged in??
fluid ravine
and call it a day
fluid ravine
what foam are you using
honest flume
The tofu foam
fluid ravine
bro what-
honest flume
The one that comes with the redux
fringe forge
its not required
fluid ravine
that shouldnt be a problem
exactly
fringe forge
its optional
fluid ravine
bro that shit thin as hell
fringe forge
i think u are doing the same thing i was doing, you gotta push the cable in a bit
fluid ravine
Yes I can go in call if u guys want and show u
ok
honest flume
I can go rn
polar girder
Plug that shit in bro
Probably not that wobbly not in case
Cuz it actually goes in port
polar girder
With PCB not in case?
fringe forge
in case
polar girder
That’s whT I’m saying
Bet if plug it on not in case it’s not wobbly
In which case not plugging it in all the way in case
Something getting in the way
fringe forge
its cable problem then
fringe forge
Cable seems to work just fine
he tried another cable and it wasnt wiggling as much as the wooting cable
fluid ravine
if a different cable works fine then
that means its just his wooting cable sucking ass
polar girder
W/L
fluid ravine
LMAO
fringe forge
i never even unpacked my wooting cable
just kept using my hyperx cable from previous keyboard
fluid ravine
just kept using my hyperx cable from previous keyboard
i was looking for that so i can bring it for school
but hell i cant find it anywhere
found razer
but shit too big
fringe forge
yeah hyperx works perfectly
fringe forge
the yellow and black would look ass with my red build anyways
fringe forge
what color is ur build
fluid ravine
fringe forge
i like the keycaps
fluid ravine
thx
im going to stick with stock case for a while
so that sucks
mod for the sound
even thought i wear headphones all the time 
fluid ravine
lol
fluid ravine
can i see
fluid ravine
o shi
fluid ravine
rough pic, i aint a photographer like some of u here
nor am i 😂
fringe forge
us both bro 😭
buoyant onyx
<@253338789798346763>
bro 🤔
fringe forge
maybe you oughtta take his username seriously
polar girder
The fuck
fluid ravine
Wait bro chill to who?
idek which one
buoyant onyx
it's whateveri just thought it's funny
polar girder
Ay yooo
polar girder
Yeah don’t be weird
buoyant onyx
ill see which case would be cheaper for the modujle later when it comes out
fluid ravine
?
polar girder
🤖
polar girder
Idk seems like they have a history
polar girder
I’ll bow out
fluid ravine
reason he senmt that was cuz i wnated to get a plastic tofu 60 case
uh huh
and then..
buoyant onyx
idk they got upset at my grammar
polar girder
Weird
sand oasis
I haven’t tried to use both it might fit
fluid ravine
idk they got upset at my grammar
i thought my english was ass
fluid ravine
I haven’t tried to use both it might fit
what if you mix the foam
redux foam and big peice of the wooting foam
sand oasis
what if you mix the foam
I can’t believe I hadn’t thought of that
Cause the tofu foam is super slim
fluid ravine
ya
sand oasis
Might do some experiments tomorrow
sand oasis
Yeh all doesn’t
fringe forge
dont
fluid ravine
?
fringe forge
i spent like 5 hours today bro 😭
fluid ravine
??
sand oasis
Sound test with both?
fringe forge
yes
fluid ravine
oh
fringe forge
.
i would not recommend to install both the wooting and tofu foam together
its wayy too tight
sand oasis
Will listen when I’m on pc
fluid ravine
i would not recommend to install both the wooting and tofu foam together
so you use half of the wooting foam?
tried with both small and big?
fringe forge
so you use half of the wooting foam?
yes, u cant really use the full wooting foam
u gota split it
and use the bigger piefce
i dont see why u would use the smaller one
i didnt try that
sand oasis
Smaller wooting and tofu foam
fringe forge
u could try that, arent both pieces the same thickness?
fringe forge
then it might work, im too tired of trying so u can try and let me know Raffi
fluid ravine
i dont even really know what it looks like
fringe forge
based
fluid ravine
i would do it
sand oasis
then it might work, im too tired of trying so u can try and let me know Raffi
I will try tomorrow as well just got off work and it’s already nearly 12pm
sand oasis
Come fly to london
polar girder
You fly him to London^
sand oasis
Fish and chips are nice
fluid ravine
ya
sand oasis
You fly him to London^
I would have offered but it was his suggestion not mine
fluid ravine
lol
sand oasis
Got try a steak and ale and chips as well
polar girder
Lol
fringe forge
Fish and chips are nice
too expensive now to enjoy properlyt
wow look at mr fancy pants here
fringe forge
yeah 😔
sand oasis
8 fucking quid
sand oasis
What football team you support
fringe forge
not really into football
sand oasis
Surely you at least support a team
sand oasis
Yikes
sand oasis
Korean fried chicken nice
fluid ravine
do u instalock jett or yoru
not a instalocker
sand oasis
Reyna instalock ftw
fluid ravine
nah
fluid ravine
you dont understandddd
fringe forge
ur pfp isnt tenz, sorry
fluid ravine
unless i explain it in a certain way
fringe forge
is it based on the jr part
fringe forge
ok its not that
sand oasis
People say I look like Micheal Jordan
fluid ravine
not only i marshal like kaemi
we have the same names
so
thats where Jr. came from
fluid ravine
ur pfp isnt tenz, sorry
its me!!!
fluid ravine
y
fringe forge
your picture too hot fr
fluid ravine
LMAO
fringe forge
HOLY SHIT ITS MJ
sand oasis
omg is that MJ!??!?
Jk I’m a 5ft 9 semi white guy
fluid ravine
Jk I’m a 5ft 9 semi white guy
MJJJ
fluid ravine
ONG
fluid ravine
you'r my superidol
sand oasis
can i get an autograph
yeh for 25 quid
fluid ravine
me
sand oasis
@fringe forge how thickly did you lube the switches
sand oasis
i will experiment while i watch the wire
fringe forge
<@781579226616037397> how thickly did you lube the switches
this guy explains it well
to prevent overlubing
fringe forge
also check out the wooting lube video to also prevent over lubing
how many have u done?
sand oasis
i lubed mine already
fringe forge
all of them???
fringe forge
damn well
fluid ravine
i lubed mine 3 or 4 times :>
sand oasis
yeh honestly i think same
fluid ravine
fringe forge
if they feel alright then thats that otherwise u gonna have to open them all up and wipe excess lube off
sand oasis
first time i didnt lube them enough
fluid ravine
i didnt have to wipe it off
sand oasis
mines not overlubed i was just wondering cause of how yours sounded
honest flume
It’s alright you don’t need to apply too much lube
fluid ravine
but its fine enough for me to put lube over it
honest flume
Less is more
fluid ravine
Less is more
not with these fugging lekker switches
fringe forge
tbh after i changed to wooting foam today my keyboard feels different to type on
fluid ravine
more is more now with these aholes
fringe forge
i hope i didnt mess anything up
sand oasis
more is more
sand oasis
Both wooting foam pieces same size @fringe forge @fluid ravine
fringe forge
thought so
yea i wouldnt put them together
unless u dont mind pushing the keyboard in with mad pressure and not worrying about damage later on
sand oasis
Yeh it’s proving pretty difficult already
sand oasis
gave up already
polar girder
Ay yo, redux showed up
Ali Express FTW
comes with a screwdriver. That’s perfect lol
weary tree
ye its cuz my country not kbdfans
polar girder
I just ordered off aliexpress cuz it was cheaper
honest flume
ew my wooting does not sounjd as poppy
with the tofu foam
its okay tho
like a nice change of pace
sand oasis
try the wooting foam but you have to peal off the top layer
honest flume
try the wooting foam but you have to peal off the top layer
that.. is there issue
so i was going to use it
Enter this mf
he made the foam go bye bye bc i left it on the floor whjile i was testing it
fringe forge
LMFAO
fringe forge
get me one too
stray tiger
I just got caught up on the last 2 hours of chat in this channel and I feel dumber for it.
fluid ravine
I just got caught up on the last 2 hours of chat in this channel and I feel dumb...
heh
should turn this channel to idiotic modding
polar girder
Lol well it’s the only that isn’t “Wooting-Issues-Complaints”
Fk
Yeah bro. Quality content. Glad you enjoyed. 
fluid ravine
fluid ravine
Holy Fk bro. I just looked at Support Center for first time
now you made me look at it-
polar girder
Not worth
fluid ravine
digital gust
just made my own artisan key and im so hyped
loud zephyr
just made my own artisan key and im so hyped
Got a photo of your wizadry? 
digital gust
ill try im not good with pics lol
Made of brass
It’s the armorer from the mandolorian
Thinking about making another of mando
loud zephyr
It’s the armorer from the mandolorian
Well done, dude - nicely done! How long did it take? I've slowly leaned out of keyboards in general but love artisans
digital gust
Well done, dude - nicely done! How long did it take? I've slowly leaned out of k...
If you include all the time I had to spend waiting for things to cure/dry it came out to about 5 days total
Longer if you include all the time I spent doing other things in preparation
Would go up to about two weeks but if I were to make another of the same thing it would be 5 days
Now that I have everything but I don’t plan on making more to sell lol
polar girder
Was planning on waiting for module but now that I have no switches, keycaps and case I might just have to put it all together
loud zephyr
Now that I have everything but I don’t plan on making more to sell lol
Were you tempted to try and make the eyes glow with the RGB, or maybe it does a little? I'd imagine that would be pretty hard to do to carve the insides out
digital gust
Were you tempted to try and make the eyes glow with the RGB, or maybe it does a ...
nope, already hollow on the inside, i just have the rgb turned off for that key
i just prefer it without the glow 🙃
loud zephyr
Oh yeah I see some light in the first photo
digital gust
yeah pictures arent doing it justice
cyan adder
do u guys know why my spacebar sounds good thocky on right but like cheap switch on left
digital gust
do u guys know why my spacebar sounds good thocky on right but like cheap switch...
probably uneven
loud zephyr
Was planning on waiting for module but now that I have no switches, keycaps and ...
For every day you leave your Wooting unused, some kid is ranking higher and higher with their Wooting. Can you live with being left behind?
loud zephyr
yeah pictures arent doing it justice
Have you tried working with Resin, the process looks so daunting but would love to try someday
digital gust
Have you tried working with Resin, the process looks so daunting but would love ...
i havent yet but it looks like a lot of fun, i have a friend whos really good at it and has her own shop, i should probably ask for some advice
digital gust
in term of lubrification?
no, sometimes one side of the spacebar might be lower/higher than the other
wooting has a tutorial to flatten out your spacebar
cyan adder
no, sometimes one side of the spacebar might be lower/higher than the other
oh. is that even ppossible? its wooting keycaps
loud zephyr
Lol It’s not unused 😅
Don't mod it. Use it raw like driving a manual car; no power steering; no GPS; no radio
mental hemlock
Don't mod it. Use it raw like driving a manual car; no power steering; no GPS; n...
just like my car lol
untold wigeon
@loud zephyr
polar girder
comes with a screwdriver. That’s perfect lol
SYKE
Just for the standoffs lol damn
I went to swap out and realized I didn’t have the right screwdriver for the case whoops.
Finally got the l45’s in anyway lol
Guess I’ll swap the case once I get the screwdriver 😅
stock case, stock plate, basic aftermarket doubleshot pbt keycaps and stock lubed l45's and stock stabs.
stray tiger
stock case, stock plate, basic aftermarket doubleshot pbt keycaps and stock lube...
Sounds pretty good already man!
polar girder
yeah not bad eh?
Pretty smooth. The new lube job does seem improved.
liking these lighter springs too
great for gaming and no problems really when just typing
fluid ravine
stock case, stock plate, basic aftermarket doubleshot pbt keycaps and stock lube...
ok
1.) Sound pretty good for stock holy shi
2).MY EARSSSSSSSSSSSSSS
polar girder
lol your ears why
fluid ravine
lol your ears why
i think the mic was picking up the rgb noises
i forgot what its called
i think it was like when you put the rgb to like 100% brightness it makes this frequency noise thing
like when you do a check up on your hearing
polar girder
lol fk my bad bro
fluid ravine
nah you good
polar girder
lol bruh my audiologist said "juding by your test results, i wouldve thought you were a 60 year old man that worked in a factory his whole life"
fluid ravine
LMAOOOOOOOOOOOOOOOO
polar girder
i was like 30 lol
sly relic
Will the Alumaze and PC Switch plate make my 60He sounds creamy?
fluid ravine
Will the Alumaze and PC Switch plate make my 60He sounds creamy?
cant confirm
have not tested
i dont think anyone has test it yet
so we dont know
polar girder
insider only would know
sly relic
aww, welp, put it in the cart just in case
fluid ravine
insider only would know
ins1der?
fluid ravine
aww, welp, put it in the cart just in case
well those 2 wont like make the board sound creamy like right away once you install them
which you need other mods
but who knows
i do think the pc plate will make a huge difference
sly relic
yeah, been browsing all over and they all said the plate is the source of not pleasant sound
polar girder
there's nothing unpleasant about the sound of performance. 😎
sly relic
there's nothing unpleasant about the sound of performance. 😎
Indeed, no complaint on that 
fluid ravine
yeah, been browsing all over and they all said the plate is the source of not pl...
yeah its producing the high pitch sound to the 60he
after eliminating the chatter from the switch
i could literally hear the downstroke of each key being filtered through the plate
everyday
i would spam one key to my ear and be like
ah the wonderful sound of steel plate
how nice
sly relic
feels nice to have a feeling maybe wooting have a new case and plate, check the web and there it is
fluid ravine
my pc plate is coming mid oct
sly relic
will send the review if no other people already posted it
fluid ravine
or arriving to the warehouse mid oct
sly relic
I don't think I will get it soon, late oct maybe
fluid ravine
its been like a week or 2 since i placed the order
im not gonna lie
it feels like hell
idk how but i could wait for a month for the wooting 60he
but 2 weeks in for the pc plate
hell something is wrong with me
polar girder
yeawh i'm gonna wait for module to realease to decide to buy PC plate or not
fluid ravine
yeawh i'm gonna wait for module to realease to decide to buy PC plate or not
you're going to wait for the price drop then decide if you wanna get the module or the pc plate?
polar girder
yeah
i thihnk it's more worth to just build a second 60he at this poin t
two sets of everything lol
polar girder
gn bro
fluid ravine
is this boom arm position fine?
i really need a tutorial on this
watching yt and nothing really helping me
honest flume
should turn this channel to idiotic modding
hey bruh I did everything right blame the cable LOL
fluid ravine
hey bruh I did everything right blame the cable LOL
tell tirade that not me
you did everything right but yet you couldnt find the problem
😂
ok actually tho
tenz & kaemi out
honest flume
LOL
digital gust
Two desk mats?
honest flume
nah BRO i did not know the wooting cable was gonna be bugging
digital gust
Also those keycaps are sick
fluid ravine
Two desk mats?
UGH YOU'RE MAKING ME WANTING TO STAY
fluid ravine
i moved it all the way to the right for mouse space
honest flume
ur dpi gotta be crazy high
fluid ravine
nah
digital gust
My guess is that it’s low
fluid ravine
400 dpi .5
fluid ravine
yeah
fluid ravine
switch to 800 for movement
like bunny hopping or whatever
arctic comet
What are some recommended mods for the wooting two HE for better sound?
graceful pawn
What are some recommended mods for the wooting two HE for better sound?
If you have the stock l60's they didn't come lubed and the housings didn't seem that tight. A cheap (but time consuming) mod would be lubing the switches and filming any with wobbly housings. You may have to 3d print films or find some that are "close enough" while making sure the film isn't too thick so it doesn't mess with the sensors. You should also definitely lube your stabilizers as well.
As for other mods, there's no alternative cases on the market for it currently and I'm not sure how safe tempest mod is.
Lastly, the new lekker 45 switches on wooting's websites come with tighter housings and factory lubed. I still personally opened them and lubed the top and bottom of the housings and the 45's sound much better than my 60's that came with my HE
And of course you can replace the stock keycaps with some nice pbt ones for a better sound as well
gentle silo
400 dpi .5
lol i essetially play on 800 dpi 0.123 sens XD which is like sub 100edpi
untold wigeon
I overlubed my switches a bit >.<
Should be good after a week tho hopefully
spent 3 hours on that shit
vivid jetty
is this boom arm position fine?
No idea, but those WooZoo fans are the shit.
shell crown
I overlubed my switches a bit >.<
Should clean them and relube IMO
vivid jetty
Should clean them and relube IMO
untold wigeon
Should clean them and relube IMO
gentle silo
I overlubed my switches a bit >.<
sounds fine tbh, mine sounded like this aswell, it just took some time for the Lube settle. With more use the sound is gonna change a bit
lost bolt
their site says shipping date is september so i see no reason to write them before september ends :)
cyan adder
Is that okay if I only have Krytox 205G0 and Krytox GPL 105 oil at home, i wonder if I can put krytox 205G0 on my stabilizer too ? Or is that a big change to put XHZ or Molkyote on Stabilizer
Sorry first time lubbing a keyboard
loud zephyr
Is that okay if I only have Krytox 205G0 and Krytox GPL 105 oil at home, i wonde...
205 is perfectly fine for Stabs and I use 105 if I'm bag lubing the springs
Also 205 for the switch stems but I only do the siderails
crimson sky
yea completely fine to do it that way
imo bdz can make stabs a bit easier but it is a lot messier
and if you only do one set it is not worth to buy an extra lube just for that
robust scroll
is the alumaze still moddable? (With like foam n stuff), because looking at the video from wooting the cable port area looks a bit too short to have foam added to it
last lintel
is the alumaze still moddable? (With like foam n stuff), because looking at the ...
I asked this also back when it was released, cos i thought the same thing. But aparently the standard wooting foam should fit np
robust scroll
Hm Okay.
last lintel
@robust scroll Here is the answer i got
fluid ravine
No idea, but those WooZoo fans are the shit.
robust scroll
<@701770724481826876> Here is the answer i got
ty
cyan summit
maybe a dumb question but can I order from korean or chinese aliexpress when I live in europe?
bronze grove
Sure. You might pay some import fees though
cyan summit
ah I see, cuz part availability is so much better for them
robust scroll
W/L? (Got for my Wooting)
bright spruce
Didn't use the 2 dollar discount L
cyan summit
Didn't use the 2 dollar discount L
imagine you don't care about money cuz it gets printed infinite either 
polar girder
Damn bro I have same problem as the homie yesterday
Cord not working
Redux case prevents the cord from plugging all the way in
The fuck
glacial wind
Redux case prevents the cord from plugging all the way in
Did you make sure it’s aligned correctly?
robust scroll
Is it worth O-Ringing a 60He?
robust scroll
Didn't use the 2 dollar discount L
nooo :(
glacial wind
With custom cases you might need to adjust the foam amount to prop the usb port to the right height. I had same thing with my freebird60 case until I adjusted the foam so the port lined up better
polar girder
Damn. Yeah so really just have to make sure PCB is shoved all the way forward
It’s not so much the little bracket for the port as it is the case just keeps the bracket too far away from PCB
glacial wind
Yeah have to put that pcb to the right spot when you screw it down as well as have foam at right level - if it’s off by a touch then the cable can’t plug in fully
stray tiger
There are quite a few cases out there where the USB opening is too small or positioned too far away to get a good USB connection. I have some cases that only work with certain cables
polar girder
Yeah but like less about square and more about put PCB as close to front as possible
Otherwise cord doesn’t even plug in
Right yeah I think that guy yesterday had same problem. Blamed the cord but it was really the male to female connection
Using stock 60HE foam
One little snip and it fits perfect
stray tiger
Yeah but like less about square and more about put PCB as close to front as poss...
Well Ive seen 2 different issues:
- USB opening isnt wide enough to support newer high speed USB cable connectors and the cable cant plug in far enough
- USB port is too far back in the case and the USB connector struggles to plug in all the way.
polar girder
Yeah exactly. The case holds the PCB usb port a little too far back
stray tiger
for example, one of these is too wide to plug in to one of my cases
stray tiger
One sounds plasticky and the other sounds metally
polar girder
Yeah I thought the same
🤓
Some dude was asking about the plastic tho
So thought to share
stray tiger
It's funny though because people think an aluminum case is the trick to a deep sound. The reality is that the aluminum case is the trick to a dense/heavy material that wont break the bank and is easy to work with. You still have to find ways to dampen the vibrations and high frequencies.
A nice thick polycarbonate case with some weight to it like a heavy brass insert, would be easier to make sound deeper.
torpid crow
yeah i got the acrylic tofu60 redux with a brass weight, everything is noticeably deeper.
the key chattering due to the switches wobbling in the plate has been really bothering me
i think i'm going to experiment with 0.5mm pads
polar girder
yeah the brass for the density
stray tiger
the key chattering due to the switches wobbling in the plate has been really bot...
The plates are usually super tight, to the point that people may struggle to remove the switches at times. I havent heard of anyone having loose switches in the plate.
stray tiger
i think i'm going to experiment with 0.5mm pads
Start with a small piece of masking tape and see if that helps
polar girder
stock l45, stock stabs, stock plate, redux case, and aftermarket double shot pbt keycaps
When i swap the plate i'll probably lube switches and stabs
but rock solid for now
oh and wooting stock foam inside the redux
torpid crow
Start with a small piece of masking tape and see if that helps
any suggestions for switch stem wobble?
the performance for gaming has been unparalleled but i'm chasing a creamier sound
stray tiger
any suggestions for switch stem wobble?
Ohhhh stem wobble. Thats more common. The pads wont help with that, neither will films.
Describe "creamy" for me and maybe I can help
torpid crow
ive basically achieved every other factor i want to in the sound profile-- the keyboard sounds deep, there
is not scratchiness or spring ping, and the stabilizers do not rattle or tick
however, some of the alphas still have that "chattering" sound
pretty similar to what this person experienced i guess
it's also something that came up after a couple months of use, particularly for the left side alphas (so the 'gaming' keys like WASD QWER etc etc)
would a heavier hand lubing be one step in solving this?
stray tiger
Stem wobble is inherent to switches without box stems. I have probably 8 or 9 keyboards next to me that most would consider higher end and I can make my keys sounds just like that if I tap them lightly on about half of them
torpid crow
interesting
stray tiger
Let me see if I can make a quick video. One mine
polar girder
Yeah a box stem lekker switch would be sick
weary tree
yeah that does sound awsome
stray tiger
interesting
Here are 3 that have a similar rattle and see if you can guess which one has box stems
stray tiger
Its the white one but I think the steel plate of the 60HE amplifies the rattle a bit more. Here is a 60HE recording of the one Im typing on now
This one does have a steel plate
torpid crow
i did get the wooting pc plate
stray tiger
i *did* get the wooting pc plate
torpid crow
so we'll see how this goes
my board already sounds very good so now it's neurotic minmaxing time
stray tiger
my board already sounds very good so now it's neurotic minmaxing time
Thats a dangerous game
fluid ravine
however, some of the alphas still have that "chattering" sound
Did i hear
CHATTER
Ima let pochizo handle that
Anyways what mods
I'm curious
tidal pewter
For anyone with ePBT keycaps: does their PBT have a textured/gritty feeling like the stock wooting keycaps?
supple dew
are there any basic mods you guys would recommend for the two HE?
stray tiger
are there any basic mods you guys would recommend for the two HE?
Lubing your switches and stabilizers is the best place to start.
supple dew
Lubing your switches and stabilizers is the best place to start.
i thought wootings came lubed?
i will do that first thing then
cyan adder
Yeah they are insanely good factory lubbed but nothing that can compete with hand lubrification
supple dew
any guide u would recommend?
also would it be a good idea to add lubes from wooting to my order or buy 3rd party?
supple dew
Lubing your switches and stabilizers is the best place to start.
ty for the answer btw
normal schooner
Lubing your switches and stabilizers is the best place to start.
after lubing my 60 he