#🔌│tech
1 messages · Page 1094 of 1
192.168.X.X are local ips reserved for the local network and are only available if you are on the same router
Okay worked
0.0.0.0 and X.X.X.255 arent even to be considered for people like you
Changing end to 1.1 seems to have worked
and everything else is a publicly available ip
Just setup static IP distribution via your router instead of the PC
if that's what you're doing
usually thats the routers ip
Don’t even ask this man to touch specified range DHCP, omfg.
254 has always been mine
C’mon, Tony.
I am able to connect from another pc from same network now
Just explain binary to hex, 7head.
But port still seems to be closed when checking
so now the real issue is most likely your ISP
ItS nOt ThaT hArD
- teachers
and the fancy tech called DSLite
which has multiple issues imo
but i can see why ISPs run it
I can’t.
Does it also affect IPV4?
it only affects IPv4
Literally change to IPv6 and this whole problem vanishes in about 2 seconds.
it basically means 1 public IPv4 is split to multiple customers
IPv6 DHCP server.
Yeah small form factor, no camera and no 3d screen.
not the kind of dslite i meant
dslite as in dual stack lite
basically
ipv6 gets passed straight to everyone
doesnt matter what the ISP uses
Explain how in the fuck removing stereoscopic 3D was anything other than a good move?
XD
DSLite means theres a NAT router in between that translates a public IP into a WAN IP
xD
I remember a buddy had a 3d phone and he liked it
Bruh what?
I do not know mans
wait the 3d slider moves on the 3ds?
Man must have eyes of steel.
It does
Down is the correct position.
Alright
its a real shit show
But what if you play upside down

towards the touch screen is the right position
I never understood why the screens had to be so small
have you ever tried showing a 49" monitor down your pocket?
I bet my ex could
she could fit anything anywhere
at least that's what all these strange men kept telling me
so
i guess its good to have a small pp for all the man who think its shit
small pp = fits into pocket
What is it detachable
urs isnt?
They do say big things come in small packages 
Might be an American thing
yeah I'm thinking NA at best
awful lot of small man syndrome going on here so that makes sense
🤣
Well how many days of the week do you eat McDonald's
too many
i was at mcd yesterday
and ate it this morning
nice and stale from yesterday
McD got those new-ish spicy fry sticks
Those are sick
But they got nothing on the Burger King steak burgers
Man those trump McD's
Some of them costs as much as bar burger though
And they are better though
Like I had some burgers in my life, and by far Burger King fucks all of em
Although in a restaurant I don't typically get a burger, I guess 
I had two satisfying burgers both from bars
Hardee's feels too greasy
Mc Donald's is below average
I guess Burger King is fine but can be expensive
Arby's is probably a better choice between the 3
Yeah those western brands have very few outlets in my country
Burger King just opened their 3rd in the whole country I think, in my home city
KFC's I think planning on a second one
No Dunkin Donuts, Wendy's, Domino's, Nando's, Sailsbury's 
Hell not even a Starbucks
KFC only matters when it comes to our KFC gaming PC

I did have KFC for the first time very recently
It's literally chicken
Like my man, get a kilo of chicken for 3$, and crust it for another 1$ with some spices 
Yeah America has a problem...
I mean oil is in theory, reusable
Just need to filter it out
Still better than spending 10$ for a bucket
It is pretty good though
and the sides are good too and it's just so convenient
that's what it's really about, imo. The convenience
How about papa John's Vexx?
Nowhere near my country 
Ah
Yeah health isn't why I want nandos 
Mostly the food seems a lot better
Oh shit Dominos did open up here
Just single restaurant and nobody seems to be going there
what the fuck is a nandos
0.0.0.0 only makes sense when binding listening ports, which means "listen to any interface".
And I finally got off 6rd and onto native a month or so ago. Such relief.
My MTU is finally 1500 all the way home.
Awesomeness
psure my mtu is like 1472
or some shit
or at least segment size
idk how big headers are
but its prob close to 1500
O o
Maybe
:')
Yeah, sounds about right for what I had with 6rd. Those headers eat a few bytes.
Oh, even worse. It was 1452.
Just out of curiosity. Would the Wooting two HE be able to reliably register acceleration of a key? Not just how far you press it. But how fast you press it.
Don't think Wootility has anything like that. But it's just a question of charting the key poilling.
Yeah. Maybe I need to read up a bit more. Was just curious. There is a lot of metrics one can gather from acceleration curves and such. But for the most parts one do not need such detail. And like I said it was more my curiosity that wanted to be satisfied. 😉
well with 1k updates a sec u can get accel yourself
the wooting midi app for example supports key velocity
oh yes. I have heard about that MIDI app. of course that would support it.
Not that I am a expert on instruments. But I do know digital pianos to mimic real pianos do read that
cough #🐸│memes
its fun looking at your server logs and seeing things like this:
() {36 vars in 645 bytes} [Sat Jan 1 14:48:33 2022] GET /vendor/phpunit/phpunit/src/Util/PHP/eval-stdin.php => generated 143 bytes in 410 msecs (HTTP/1.1 400) 3 headers in 116 bytes (1 switches on core 0)
vurnability scans!
FINALLY
Plasma desktop let's you finally use root access on apps like dolphin and Kate
So many times I needed to open a text file and I can't cause you can't run Kate as sudo
Now you can
Woooo
btw those usually generate a good 2mb of log a day
or just 195.54.160.149 - - [01/Jan/2022:03:47:33 +0100] "GET /index.php?s=/Index/\x5Cthink\x5Capp/invokefunction&function=call_user_func_array&vars[0]=md5&vars[1][]=HelloThinkPHP21 HTTP/1.1" 404 188 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/78.0.3904.108 Safari/537.36"
how about
2 megs access log total? Or just those types of requests?
i mean
its basically just that
if id boil it down
its like maybe 50 or so legit requests
and then around 5k of those
btw thats just 1 domain
that i seperated out in nginx cause it spammed the logs
Why do you have logs for a Russian site
remember the thing that happened with my image host?
Oh
apparently i also hosted gigabytes of hentai
also people trying to access a project i havent even touched or uploaded since i removed it years ago https://discordjs.moe/saiypczgzqc2.png
poor souls
I'm in the tech department of a fairly large player group for Elite: Dangerous. We have 4 dedicated servers running just to handle our infrastructure needs at this point. There is... significant log spam from exploit scanners and intrusion attempts, not to mention old apps apparently expecting a different server on a likely recycled IP.
Great way to start the new year, phone leaks
Hmm, probably something that wouldn't work on my pcie4 platform. Interesting nontheless 🙂
i heard ed
now im interested
We run a player group called the Fuel Rats. Basically, we go out and save people who run out of fuel.
Its infrastructure sort of... er, grew, over time. Too many clients, too many rats. So almost €200 per month in dedicated servers, AWS DNS and various sundries. 😛
here i sit with a puney 50bucks
altho i also am unsure if i could max the 14cores and 64gigs of ram
its a glorified imagehost atm
well and discord bot test heaven
We run 3 dedicated servers on Hetzner, and one AWS instance for our US IRC server. We do our own image/paste hosting as well, though the image hosting is just a Nextcloud tied in with our SSO so rats can have a gig of upload space for their rat related stuff.
Squeak! o7
imma quickly check what a comparable root costs at hetzner to what i pay atm
they dont even offer 14cores, 64gb ddr4 ecc and 2tb ssd
let alone epyc
ngl
this is sad
literally the price i pay
hows the price on aws and something smaller like linode looking in comparison?
Fuel Rats were so dang helpful back when I played Elite. I've had at least a handful of really close calls when exploring blindly like a dope 😄
linode wants 480/mo
but id get 32cores
also less ssd
and limited transfer
8tb bandwidth
for multiple hundreds a month it might be cheaper to buy the hardware and rent a spot in a DC
no
yeah but that's a bit older compared to what a host could offer or did you get a milan server?
at home the machine is snapinator
i mean
my host offer 14 epyc smthsmth cpus and ddr4 ecc
for 40bucks a month
i paid
430eur
for a dl380p g8 with 128gb ddr3 ecc
and dual smthsmth
Intel Xeon E5-2697 v2 (2.7 GHz/12-core/30MB/8.0GT/s QPI/130 W, DDR3-1866, HT, Turbo2- 3/3/3/3/3/3/3/4/5/6/7/8)
those
g9 and ddr4 is just too expensive for home lab
altho id doubt for the applications i use it for that it matters much
i could prob just host my image server at home now
i would host at home
but my interwebs just aint reliable enough
i only get 12 up
on a good day
thats what keeps me from hosting at home atm
50up is sad
and the fibre shit
well
they forgot to plan fire safety and stuff for the apartment buildings in my city so i aint getting fibre soon
living the coax dream
i need to clean up
Dang tony your girlfriend gets a whole 5.5TB
same
I’d kill someone for this internet.
i have 400gb in redundent backups alone
is that a future confession I hear
Does anyone know why USB 3.1 generates ISR counts even when setting the controller to messagesignaledinterrupt mode on?
If you wanna get me gigabit down, sure. 
How long till i need to backup my files 
never
10 times the piracy legitimate game downloads.
id prob just spin up a proxmox vm with an image of the doommachine
Callum sorely needs an expanded NAS xD
measily 2tb
too many.
no we talking formatted and raided
1 >= 10TB for games and then some arbitrary size for other stuff
oh u actually got 4tb formatted
i dont care about data loss
just noticed
i disconnected myself from important data
anything i need backing up is backed up
my greatest moment of shame
one day ill finish them... all star wars
your onlyfans or somebody elses?
Can't listen to audiobooks. My brain filters it out immediately.
I can only do it when doing mindless tasks like moving shit around or yard work
If I do literally anything other than listen, I will zone out. So I might as well fucking read the books manually instead 😄
I hear we're comparing drive clutter. https://absolver.cloud/index.php/s/f4KyC9zZQYxc6eE/preview
heheh
What? Freenas is a fine NAS OS.
It wasn't when I made it. 😛
Because the data volume mounts from a script, most likely.
I am luckily not that deep in the OCD traits.
u can sure be glad
It also annoys me too....
I am seriously considering redoing them now, by putting them all in script. Or well, those I can.
Like this:
for mount in mounts:
mp=''.join(choice((str.upper, str.lower))(c) for c in mount))
``` :>
Because different users mount different volumes.
Sure, but that's not the environment I run in.
ngl im not even sure if mapped drives are kept between users
Mapped drives are on a per user level.
even less reason to have scripts then
In fact back when I worked with Windows XP domain servers, it was perfectly common to temporarily map drives every time you logged on. Just to be sure they stuck xD
I think I'm in the best position to know what needs I have for my own network in this case.
It isn't.
i dont understand
mapped drives are per user
they stick anyway
so
i dont see a point in scripts
My network is segregated. How I mount the volumes depends on how I am connected to the network.
For example, if I am connected using wireless or VPN, I can't access all the shares. Some require a physical LAN connection to a specific switch to be available.
personally still dont see a reason for scripts but i guess you do you
I can 100% confirm that group policy is jank and needs to be supplemented by scripts to make sure important things happen
Even more so when dealing with RADIUS MAC authentication, and split horizon networks. 😛
the usual .. #GNOME #GTK4 and lots of upcoming things, for #Files this time!! nd im using YouTube fonts in case you're wondering :p
hello, is there any downside to leaving tachyon mode on all the time?
no RGB effects, but if you keep the lights still, that is not a problem anyway
so it doesnt add like extra stress or anything that the keyboard wont like for prolonged periods? can just set and forget?
yes
Ye
pogchampion

here have my latest one
recorded it early in the morning so my WPM was complete garbage
@old marlini was more showing my shitty soldering with the leds lol
ah
well
I can show my non shitty soldering

would not say it is great
but passable
My fault
i went in without any experience
with an expensive build
I could do it just fine if i rebuilt it
oh i had that one too
@shadow minnow https://i.redd.it/h7rlrg65e3981.jpg
thought of you
my phone is 128gb
idk how i could ever fill it up
I think I literally filled up more space in phone then pc if I count in photos I moved from my phone 
Netflix downloads hd quality + Disney+
theyd expire before i could watch them all
Getting close to running out of space again with raw photos and Dolby vision videos
Damn
Luckily I found out I indeed can import by one click photos from phone to max and have all the photos that are imported deleted on phone afterwards automatically
My phone autouploads to Nextcloud, so I can just nuke the local camera storage when I run low.
Bexin dont like that
2tb iCloud too expensive
Just get 512gb iphone next time
More like 1tb 
Like I am pretty sure I would have filled up 512 in less than a year
Or just backup on pc and from there hard rice and don’t buy anything 
COS
SIN
YOU TAKE PICS OF EVERY SECOND OF THE DAY
TAN
^
Takes one step oh that stone looks pweddy
Hey I am not t3 
Bexin you may as well buy a dedicated camera at this point
Too hard to carry around
And a ton of sd cards
Though I do agree dedicated cameras are Pog
Also would fill up storage even faster 
Especially since I tend to take photos at random times
Why though
Especially for low light EOS r6 or 5 or whatever I tried is Pog
Also overall for details way better than phone
Still too expensive
And can’t carry it everywhere the same way
which then no longer is the same way he'd just carry his phone
The SanDisk Ultra microSD UHS-I card gives you the freedom to shoot, save and share more than ever before. With capacities up to 1 TB, our SanDisk Ultra microSD card is perfect for recording and watching Full HD video, with room for even more hours of video. Transfer speeds of up to 120MB/s help ...
Don’t have enough space there usually
Bexin
when you get your server just make a photo server
all my photos auto backup to my nas
Guess I could do that if I ever get that server
Though idk, is there any app that can auto do that from my phone?
Watch this be a thing you can pay extra for to enable in the future..
basically useless for desktop anyway and amd will have it starting with zen4 so the better option is team red again
not that useless honestly
considering a lot of game devs do pointer encryption bullshit
AVX instructions help with optimizing that code by a lot
I recon if any game is optimized to a point where your cpu not using avx3 is the bottleneck something else has gone wrong
and avx/avx2 all still work obviously
oh so you don’t remember pubg 3 years ago
where they killed performance with pointer encryption
something else has gone wrong
I count that game as a total mess
that is a great point
Gotta agree with Quin, tbh.
And most of the time games are horrifically badly optimised anyway. Shit like Unity is great for sheer speed of development, but compared to C++ or assembly it’s laughably slow.
Lots of tests have been done to compare C++ optimised code to unity development and C++ is legitimately several orders of magnitude faster.
Assembly is even faster still.
I think that just having people that can actually use and optimise C++ work is a bigger boon for a game than AVX-512 could ever really be.
c++ code gets compiled to native code (== assembly)
and no, it is honestly not faster
a modern c++ compiler is smarter than you and can make much faster code
Kinda.
Compilers still leave unoptimised code, but it’s usually to the point of diminishing returns.
Theoretically could be faster, but the gains wouldn’t be amazingly high.
well obviously compilers don’t know what the fuck you want to do
Though with that said there’s some extremely clever tricks you don’t see a lot of the time.
Mate of mine is making a hyper optimised game engine, it’s hilarious seeing what lengths he goes to for more speed.
the reason performance in so many apps/games sucks nowadays is because people are incompetent
ask an average developer what a profiler is and they won’t know what to say
unity runs on c++ and can convert IL to it aswell, bit of an off comparison
which engine?
il2cpp is nowhere close still
Yes, I know.

sure il2cpp is still not native but quite good and most of the comparisons made on unity vs native c++ are made in incredible dumb ways
like no shit your native c++ engine that has literally no editor UI can spawn things faster big congratz
That’s kinda the thing though.
If you have a fully functioning engine versus a C++ native one with a full UI in the hands of somebody talented the C++ native will win.
when saying you’re a programmer also meant you’re competent huh

It’s just everybody is used to using libraries and skipping instead of learning.
but same thing for unreal and other engines that are purely cpp I think I understand your point but the language is irrelevant
basically... like those people knew how to write efficient or smart code
but then you are using something not art or design person can use without doing cpp themselves
programming being more accessible is both a blessing and a curse
This.
10000% this.
thats basically every profession tho
Look at literally every game made for an N64, they’re all works of hilariously optimised and corner cutting art.
Shit all modern is done to that level of skill.
disagree, yes the bad parts are obvious but the better parts coming from it are so much better than the limited options we would otherwise have
sure we would not have NFTs and probably no javascript in websites but we also would not have functional websites at all
thanks for reminding i need to take my ps1 to moscow
Just wish more people would learn fundamentals instead of ‘java go brrrrrr’ and ‘python go brrrrrrr’ library hell.
to run the nuclear reactor?
Y’know how many pointlessly large libraries exist that can be done in maybe 40 lines of code?
ill just write horribly inefficient js and make a fancy looking but running like ass website
then rinse and repeat for my first program
You better be using that 120k line library that’s entirely unneeded.
Fuck it, import the whole thing and slap that bitch into a loop variable.
I promise no slowdowns.
yes import all the functions even if js and css can do it by now
Literally call ALL the functions.
Doesn’t even matter.
Bodged solutions from 10 years ago still work fine regardless of C++ being able to do them faster and in 8 lines of code.
window.close() intensifies
Who needs 8 lines of code when you can have 40k? Bigger number go brrrrrrr.
for real tho
i like programming being accessible
but
i dont like the people jumping in wanting to make a vulkan based game engine as their first project
My bigger gripe is people not understanding fundamentals and assuming memory leaks and garbage collection are a problem of the past.
if we would not ahve those 40k libraries we would not have the Log4J issues sure, we would also have basically no software that would to the thing, optimized or not
hence I think the part thats a curse is by far smaller then the benefits
Guy, I’m perfectly ok with a library, but I’m not ok with idiots ham fisting it in because ‘Python go brrrrrrrr’.
Lack of knowledge is the problem here, not lack of tools.
And yeah, the drawbacks are fine now, but y’know how often we’re getting into the issue of “well we would fix it, but nobody knows how the technology works” comes up?
That is only going to get worse with time.
sure but I rather have tools with big issues than not having the tools at all
I know the massive issues it all has obviously
And when nobody can fix the underlying technology?
Seems like one of those massive problems that’s only able to be fixed via education.
still better than never having it because we never progressed that far
it'll always be a battle to make it better
Tbh what it looks like is a few hyper talented devs trying to hold together the foundations while morons keep apeing around with simpler language and have no idea what they’re doing.
Literally all I want is basic fundamentals of computer science to be included here. :(
Not everybody needs to be the holy grail developer that can solve world hunger, but goddamnit why are we lacking basic knowledge like this?
Just... take the primer to whatever course you’re doing...
I'm amazed how Wooting and other smaller vendors are able to provide serial numbers with their devices... yet Logitech and Roccat can't
Logitech do?
You can register it
It's on the bottom of the device under the weight thingy
That's useless
Oh
"Please hold the bottom of the blinking mouse in front of your camera."
The device itself does't report this serial number, so if I plug in two devices of the same model, things get tricky.
Worth throwing it out there: anyone have experience with generic LCD(?) drivers off of Amazon/Ebay? I've got one that does what it is supposed to, but it doesn't seem to support all of the LCD's features. There's no DDC (as far as I can tell) and no USB connection. The menu seems barebones too, so I'm wondering if there's some secret hold/click combination or something. Thanks.
LCD.. what? LCD monitor?
Yes
You can buy the bare panel online
I'm just saying, the question is a bit too generic to actually be able to help with. 😛
lcd panel
its generic
cause mage is using generic stuff
an lcd driver and some lcd panel
Even generic devices have a manufacturer, and knowing which it is would at least give some hope of finding some documentation.
i will agree on that
tech scammers got a new domain now.....
150.co.il
the title of the website is in arabic and its strange overall
has links to remote access software on it
yeah, I found a new scammer domain
of course they have a new domain
They can get new domains anytime they want wtf
whys it got arabic on the site?!
Ok
no
idek anymore
hebrew
ooohh
Lana get off the internet 
bruh
lana is the queen of random shit
that surprises her
depsite being non surprising
just wait until she finds out discord scammers also get new domains
Lol
Right kinda my fault for not specifying what I was talking about. I'm using a PQ3QI-01 LCD. It's supposed to be able to switch between transmissive, transflective, and reflective mode. Documentation about this LCD can be found at https://elinux.org/images/3/3f/PQ3QI-01.pdf and https://cdn-shop.adafruit.com/datasheets/3Qi-1_V22_spec_20110919.306200524.pdf (unaccessable via Tor). As far as I can tell however, the LCD board driver I'm using (https://www.amazon.ca/dp/B07VD3446G/) does not have any options to support these modes. Looking on eBay, it seems like the other controller boards on there are pretty much the same (at least in terms of design). My guess would be I need to go dig at the bottom of the internet to find a genuine board driver, or figure out how the hell to run one of these manually, which is probably way out of my god damn expertise. On that note, the resolution of the display is also limited to 1024x600, even though the documentation states it should be able to go up to 3072x600, but this might just be me being dumb as hell and not understanding the documentation. So that's why I'm posting here in case anyone has any knowledge in this area. If not, it was worth trying.
The driver you're using is the limiting factor there. It only supports 1024x600.
That's unfortunate. I didn't notice the max resolution on the driver at first, so that's my fault on that end. Thanks for at least mentioning that. But I would have at least taught that it would support the other two modes. On that note, the board also has two different labels on it, one stating Y-158624 and the other stating P21071592-0A00769. I can't find anything on this though.
According to PQ3QI-01 specs, it also only supports 1024x600. I suspect you have confused a triple display setup, which would be 3072x600.
There is a Pixel Qi Mode Control Application for mode switching for reflective, trasnmissive and transflective mode.
Switched the PDF.
The first document states "In reflective mode the screens shows higher resolution at 3072 x 600 pixels", so not entirely sure why it's missing from the 2nd.
As for the control application, I'll have to go and dig for this, I couldn't find anything last time I checked for it unfortunately.
That's why I tried looking into if there was a DDC or a USB connection, but there was nothing there to go from.
Oh, you mean luminance resolution.
Yeah, my bad on that part
This is not actually "resolution" in the normal sense of things. Yes, you can do what's called subpixel rendering while in transflective and reflective mode, where you push additional 'resolution' through the luminance channel. Each actual pixel (in the 1024 rows) actually consists of several subpixels, and those modes can give you control of each individual subpixel.
Pixel Qi was apparently bought by Tripuso. This is their new site. https://www.tripuso.com/
I suggest contacting them for the software.
I likely will need to be doing so.
Thanks again for the help.
It's a shame that there aren't as many reflective/transflective displays out there though. E-ink is good and all, but it cannot achieve a decent refresh rate without issues. Not to mention they're generally very expensive for higher resolutions and sizes.
Point 6.3 of your PDF:
The display panel supports 3 modes: purely reflective, purely transmissive, and transflective. The mode is set by the ambient light intensity and backlight intensity. The following truth table shows how different modes are selected
Right. Trying to set the backlight to 0% in the menu doesn't seem to turn off the backlight however.
There's also no ambient light sensor that I can see on the LCD or driver.
So either the driver isn't actually setting the backlight to 0%, or something funky is going on.
You've got the NT68676 board controller docs, right?
I actually do not.
Is there something I'm missing here? I apologize for my naiveness.
And its datasheet. https://datasheetspdf.com/pdf-file/1031031/ETC/M.NT68676.2A/1
Download M.NT68676.2A pdf datasheet file
Oh well this is interesting
Ok, doing the power/menu thing, as far as I can tell, the backlight is at 0%. Moving it up to 100% and back down to 0% did nothing.
There is one more thing I could try I guess, unplugging the inverter cable. As far as I can tell, this wouldn't damage anything (inverters go all the time, don't they? And when they do, last time I checked, LCDs still function but they are pitch black).
I'd try setting up a way to hook into the LCD backlight signal pin instead.
Yeah unfortunately that looks like what I might need to do instead. The inverter circuitry wires seems to be soldered on (or superglued, whatever be the case, it is unremovable, short of potentially breaking the board).
Just hook in to LED_EN with a switch. 0v = off, 3.3v = on.
And if the board is supplying a constant on anyways, just interrupting it is enough.
That at least gets you reflective and emissive modes. For transflective, you'd have to hook into the PWM.
Might have an easier option, but I'll have to ask first: What about removing the jumper pin instead?
I haven't read the board spec that thoroughly, and certainly not the circuit. You could end up overvolting it, if the jumper is to a voltage sink.
Yeah that's what I was thinking. I don't know for sure how it works, so it either defaults to 12V, or doesn't
Well, I'll have to go find out which wire is LED_EN. There's one problem though: I don't have any switches on hand, as ridiculous as that sounds.
For now though, I'll likely leave it into emissive mode for now, and whenever I get a switch, I'll try it out and report back with results.
Thanks again a lot. And sorry for my ignorance in this domain, first time I'm doing this.
True. No stupid questions, right? Then again, some people aren't as understanding.
Oh, that might make a bit of sense now.
Pin 4 is left unconnected, and there's two wires going to pin 3. Figures.
Well then. I'd definitely start with a multimeter, and figure out which is which.
But double check that the board revision is correct to the manual you're looking at.
Given that no voltage on pin 3 originally should lead to the backlight NOT turning on, that's a flag that it may be a different board revision.
Asking for a friend, not for myself but where would one find windows server isos
On MSDN?
If you could be specific about what version of Windows Server you're looking for, I could probably give a better pointer.
Actually, they have them all in one place now. https://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2019 - just pick your flavor, select ISO, and click.
The Microsoft Evaluation Center brings you full-featured Microsoft product evaluation software available for download or trial on Microsoft Azure.
Huh. Well, that is one way to prevent having your bandwidth used for pirated keys I suppose. I've always either had Bizspark or MSDN access, so I just use the ISOs there.
which one
2008
2012
2016
2019
or 2022
hyperv?
do you also need a key?
just hmu bro i can hook you up
i need help
with?
go to the right channel then
thank you
i wish i had more proficiency with uup dump
but i just log into company msdn
way easier
EVGA GeForce RTX 3090 Ti Kingpin to require dual 12-pin power connectors
https://t.co/akif5oAHkd
179
UN LIMITED
POWER
UNLIMITED FRAMES
UNLIMITED PRICETAGS
Too
Ooo I forgot this little trick
whats the conversion of 8ping pcie to 12pin
2 6/8 pins are one 12 pin
also it's coming as pcie5 spec so you might see it on futures psus directly
My only issue with two 12 pins is that they will kinda go against purpose of 12pin and won’t be much better since you will still need two 
but fully modular so i can just swap in another psu
I also have just 850w
People said it gonna be enough so hopefully 
Wanted to get 1000
But Corsair discontinued it just before 
why would it go against purpose of 12 pin
the purpose was never to have it be less cables
cause 4 8pins is better
No but just wish we could have just one cable 
splitting up the load between two is much better even if you could deliver all the power through one
well I wont stop you from putting candles into your pc
That’s true tbf
well ebay seems to still sell those for a grand so depending which one you have you might get lucky
zotac extreme amp
How does my phone reminder the volume levels I set for the aux cable in my car and another volume level for my earphones
I don't get it
They use the headphone jack so it should be the same volume I'd think
850w for a 3090 or 3090 ti?
No
They don't
it is 2x 16 pins (up to 1.275 Watt)
Hmm... Not sure
I plug phone into car, it remembers it should output full volume
I plug my earphones in and it plays at 20% volume
Coax lol
yes i got that
Odyssey G8 Neo was announced
basically a G9 neo
but in 16:9 4k
at 240hz
up to 2000 candela per square meter
Most likely impedance detection. That's pretty easy for a circuit to do.
Relevant patent: https://patents.google.com/patent/WO2006045617A3/en
An electronic device comprising a jack arranged to receive a peripheral device AN plug, the A/V plug providing an end-terminal for a peripheral device to be connected to the jack, wherein the device is arranged to detect insertion of the A/V plug, and upon detection of insertion, discriminate the functionality provided by the peripheral de...
My poor arms...why can't monitor manufacturers give their boxes a goddamned handle.

Mine had!
Mine too. They're usually on the sides. Though the 37"+ ones get a bit stretchy.
I'm talking a proper plastic handle. Not cutouts.
Those are surprisingly useless on a wide ass box to have on the ends. 
#1800DEAD
#1800BEEF
i always feel like a springloaded smartphone holder when i carry big ass screens via side cutouts
just have longer arms smh
Wiiiiiiiiiide
Thicc
Learn about an NFT’s blockchain history from the comfort of your couch
Ffs Samsung
Corpos are acting up again

They really believe that it's a "movement"
It's more or less a few idiots trying to make a fortune out of it and people with more money than they need getting caught up on it...
Oh wait, "more money than they need"
Yeah I see why this is happening now 
its such a weird concept
cause arent nfts only verifyable at 1 specific like verifier
or smth
Correct. You'd need to tie it to blockchain somehow to make it a more global thing.
I have zero love for NFTs. But they do aptly prove the whole foundation of cryptocurrency. Things can have value because people agree they do, even if they're ephemeral.
The trouble with NFTs is their digital nature. Unlike a gem if the NFT authority who you'd check your ownership against vanishes, you can't prove you own anything unique.
And since the same exact "object" can be NFT'ed across a dozen different authorities, do you really own anything unique other than a string?
no
not like your "object" is in the blockchain to begin with usually
Hence the need to tie two systems together.
But serverless architecture! Run it all on the blockchain!
one word
degeneracy
you could make the "link" into a hash or smth that translates into the picture via an algorithm or something in that nature, then it would be closer to you owning the actual image
still mostly a big scam regardless
and as we see with them recently blocking sales of some stolen nfts, they aren't even using the decentralized system it's supposed to have or that would not be possible
what most game companies want is just what valve did with the steam market years ago, make money for free basically lol
I just went to the tech shop near me
They are selling HDMI cables for 50 euro ....
DAFUQ?
Sometimes I feel like you're stuck in some sort of time shifting thingy where you discover stuff from years ago just now xd
The only game I miss my 21:9 monitor on is Minecraft
Minecraft is so damn nice in ultrawide
More pixels, slightly less height, much more wide. 😄
34" vs 31,5"
price of convenience of getting it right now
Or just "gold plated home cinema" style cables.
What's the input lag on gold plated cables?
no no, cause if you look at their wall of accesories, you get cheaper HDMI cables there for like 12 euro
but these one arent as fancy, they are sealed in that shitty plastic you need to risk losing a finger while opening it with scissors
the copyright part of this argument is really up to the conditions of the sale.
Maybe the next generation lekker switch should have gold plated magnets?
the expensive 50 euro ones come in a sealed bag
thats not new and not something only in ireland, has been a thing for years and still is
🦭
I know... sucks .-.
is that the "hassle free packaging" that amazon sometimes offers on tech produts?
the bag vs that shitty tough plastic?
please do us all a favor and just ignore wcctrash
I'll ignore you instead 
Oh snap
For less elitist of you
AMD's CES 2022 lineup has leaked thanks to WCCftech. The company will announce refreshes of its Zen3 Ryzen chips. The yet to be announced Zen3+ APUs, codenamed "Rembrandt", include Ryzen 9 6980HX, Ryzen 9 6900HX, and Ryzen 7 6800H all of which feature 8 cores and 16 threads. AMD will also announce the Radeon RX 6850M XT, an RDNA2 GPU for laptops.
That news is so last year.
Radeon RX 6850M XT, the product is a Navi 22 GPU paired with 12 GB of GDDR6 memory, a 175 W TDP, and a 196-bit wide bus. All of these spec bumps result in a reported performance uplift of up to 15% compared to other Navi 22 laptop GPUs.
To be fair, sounds pretty good
yes and lisa already showed the actual chip https://twitter.com/LisaSu/status/1478003330463019010
Happy New Year and welcome to 2022! We are kicking off the year with lots of new tech - hope you will join us for our #AMD2022 Product Premiere on January 4th at 7am PT: https://t.co/ixOLhxjkuM
thats not what I care about, wcctrash is a garbage site using recycled content with writers that have less journalistic ethics than trash cans or video game journalists
I am somewhat boggled about the choice to not add 3D V-Cache to the APUs.
I am well aware of the writers issue of Wccf
It's just that the comments are really funny to read
I mean, it's a 20%+ boost in single core performance over the line. Why not?
$$$
v cache is a slice of 7nm wafer allocation so putting it on a product that does less gains and also less profit gains makes little sense
and that is excluding any other issues as a apu is monolithic instead of having io and gfx on a seperate die
which might make it cost more or harder to do
cant move, can anyone help me?
oh sorry
r/chargeyourdamnphone
Actually using my warranty for that
It's a fucked battery
Mm. Well, the dip is consistent with a LI-Ion battery reaching the discharge voltage dropoff point, but that would be happening at like 10-15%, not 25-30%. So bad BMS, likely.
Million dollar question
What’s your phone’s battery health?
I am at 86% 
Not the best not the worst
% of max battery capacity your phone can achieve I think
that's what i know of it 😄
It’s a pretty good thing imo. May not be fully accurate but gives you general idea of state of your battery
no it has sensors for that to have a fairly accurate number to show
cool then get one and look into it I guess
meassuring rough estimates of things like that is doable with basic functionality that components have nowadays so idk why you're so sceptical
I think some android phones have it too though not entirely sure
Also was added to MacBooks
Cheap case
Official Apple case. Was nice at first. Just looks like silicone doesn’t really last with the way I use it 
So yes cheap
I mean wasn’t cheap as in how much it costed 
It depends on the BMS implementation. But there's quite a bit of intelligence to most systems, especially in phones. Most BMS systems have individual cell monitoring, meaning it tracks the state of charge for each cell, and tries to balance them out as they degrade. Even if a set of cells are fairly equally matched right after production, they will often become more and more disparate over time as they accumulate cycles.
Apple for ya
2026
Just in time for cyberpunks re-work!
Which turned out to be a fake leak.
I was gonna say ashes of creation but lul let's be real
Hm.... I might need to return this monitor.
Red text on grey looks really pixelated and bad.
I can't seem to fix it.
Are you sure it's not doing like 4:2:0 nonsense or such
it's a budget monitor so likely just bad panel
How would I test this?
My AOC was bounds better...and years older. And was cheaper on release than this 😄
...that was weird. Just fixed it by changing DP signal version on the monitor OSD. From 1.2 to 1.1...then to 1.2 again and it's normalized.
Somewhere in a graphics control panel near you you should be able to se whether it's proper RGB or YCbCr
There we go. Had to force the monitor to 1.4
1.1 and 1.2 wouldn't let me pick both 144hz and retain an uncompressed colour standard.
Sounds about right

Think 1440p is max for 1.2 with 144hz. Not enough zoomies.
Apparently 1.4 is minimum for 1440UW 😄
2560x1440 for 1.2 and 3440x1440 for 1.4, yes.
depends on what frequency you want
(@144hz)
30hz all one needs
24 final offer
15
My battery health 86%. How long did you have your phone for?
2 years in 5 days
Hmm 78 is not good then
Even if not the worst
Do you fast charge it, and charge wirelessly?
you cant compare two different batteries in two different phones
Fast charge also your battery is a fuck ton smaller
It’s less than 10% smaller
Since when
Mostly true tbf
Your says 4000
13 pro max is even higher and lasts way longer but yeah don’t have that.
Oh I forgot they charge for HD and bigger size 
What?
If i remember correctly the max was a way of getting a higher res and battery
Yes
But it is the case for every phone I think with battery at least
More space so more battery
And res, well, PPI is the same so res gets higher
I mean sure iPhone batteries aren’t the biggest but still more space is more battery space
And with 13s battery is way better too. Though with 12s it was pretty bad, worse than 11 I think
is there any keycaps that has some sort of soft material that helps suppresses noise of typing
Orings
i was looking something more of that suppresses the noise of the keycap hitting the keyboard plate
something like a material that goes under the cap itself
Your keycap* should never hit the plate.
But what if I'm angry typing on Facebook?
Your switch rests on top of the plate. So for a keycap to touch the plate, you would have to hit it so hard, the switch falls through 😄
oh no
please let it be something small and not very relevant
I can get really angry on facebook comments.

...
Er, ASML is one of the lynchpins for semiconductor production. Soooo, er. Yeah, this is not insignificant.
I hope the fire is insignificant.
I know what asml does but that doesnt mean anything
bc that area might not be significant
at least it wont make anything worse in the short term, if it affects something it just means it gets worse in a couple months/years xd
Things getting worse in semiconductor world right now would be suboptimal, even if it's 6 months in the future. When we're hopefully supposed to start recovering from the current shenanigans.
I love Louis Rossmann reacts with fans 😅
"i just heard someone start fanboying so I started to walk faster, I'm going to hell for that"
"how are you? Fuck me, i never know how to respond to that shit, maybe I'm autistic idk, I'm an asshole, I'm sorry"
@wheat plume you watch him right?
Omg lol
if it’s a video of nyc streets it has to be louis rossmann
Last I heard he was house shopping in the NY burbs.
most american cities
the trash bins in the suburbs would like a word with you
but yeah it trash
He moved a few days ago
But angry new Yorkens are funny
And A380 seems to be their "entry level" card?
So if 128 EU's can match 3050
512 EUs should defo be enough to match 3070
Let's just hope that it's cheap and available and has good drivers
Entry level
400 €
That is true, my little experience is that Intel graphics on Linux is a smoother experience than on Windows
Pick two of the above.
I'll pick all of them
Intel doesn't have a keynote this year.
They're doing press releases during CES though.
doesnt matter because nvidia is going to release high end product and intel just the gpus that are low end to mabye mid range
so no chance of last minute adjustments
and I'm certain intel's cheapest gpu will be below 300 (msrp at least)
just because they first need people to buy it so it is more out there in the wild and getting used
and not by people who are not general users
We don't have swarms, but we do have rescue drones hereabouts now. FLIR/Thermal equipped, for searching inaccessible areas. Cheaper than helos.
I love how you can basically do a clean install of clear Linux by just deleting /etc and /var
Very very neat
Their stateless design is really clever
AMD reveals Zen4 Raphael CPU design Desktop Ryzen CPUs with 3D V-Cache and next-gen Ryzen with Zen4 architecture are part of the CES 2022 announcements. AMD finally confirmed the name of the upcoming Ryzen CPU with 3D V-Cache. The Ryzen 7 5800X3D will offer ‘extreme gaming performance’ and it will be available in Spring 2022. […]
Legit rubbed my eyes thinking I was tired when seeing that img
assumedly just a 5800X with a shitton of cache?
maybe better binning too yes
Damn, would have been amazing
AMD XD
What the keyboard do
It clicks
And sends a signal via USB I guess?
That's about it
Oh and also
LAYZERRS
FOR GAMERS
DP2 also pretty cool
Doesn’t really matter if the new chips are a big focus on igpu power where they are miles ahead
Different price segment
isn't USB4 just a repurposed TB standard?
might be a driver thing?



