#šātech
1 messages Ā· Page 1053 of 1
on top of his own shit
but if you apply like 200 mods
and they all add stuff
and all get handled differently
Learn from Terraria 1.1, do not do Terraria 1.1 netcode.
gl optimizing that as a total
Terraria 1.1 netcode is fucking cursed.
This modpack is mix of every single mod that looked interesting. But some mods donāt work well, gotta check if there are new versions. Also one mod would require me to change biome ids in config since no unlimited ids supported which would take possibly hours.
Rebuild modpack, yeah.
Nope, want most mods there. Possibly gonna update all mods but thatās around it. I would have to remove like 400 biomes if I wanted it to work well without spending time which I also donāt want to do.
Not enough IDs is the best 1.12.2 mod 
Dude, you should rebuild the modpack because it's not optimized at all.
Keep the mods, but do the base level rebuild first.
Make default forge + optimization mods.
Probably take you a few days, but more modpacks is more good.
Hell, upload it to Curse as well, big packs that're well made aren't too common. 
Always just cursed.
This is cursed. Also huge mix. Flying stuff, basically all tech mods, optionally Emc, huge amount of biomes, I would need OTG for even more good ones, and also magic mods⦠basically everything
Could not even uploaded to some stuff because too many mods.

Wow Samsung come on really
I have a feeling the EU might get involved.
tbf, most custom roms wont work on the fold anyway
cause a lot of it is custom code to support folding in the way that they do
I think we are the point where custom firmwares are mostly pointless, they are pretty much behind what exists. Performances gains seem unnoticeable. Only real reason to jump onto a custom firmware is for a different stock look.
I fail to see the argument there 
If you have a custom rom, the folding support wont work very well
you wont be able to do some of the things for multitasking and whatnot they added in
Fair point but sadly unless someone intends to build it themselves only devices I have seen to degoogle is pixels
That will eventually work fine, just needs a lot of time to be ported.
Only way my pc finds multimc is by searching through whole disk. Search function working very well again.
Luckily error code has told me enough details so just gonna try to update/remove mod that caused it.
Linpack is pretty good for heating up room, 300w of cpu power consumption, since itās getting cold. Surprisingly cpu block does not get hot at all, just cpu can hit 96c and water gets 3 c warmer
at least run folding@home or something if you just want it to heat
Mine crypto
Actually thinking of that but atm I am not really running at stable speeds so not yet, but thinking about letting that run overnight.
With iGPU? 
Yes and CPU
Definitely rather folding at home.
Even if I wanted to mine crypto profit fees here are pretty high afaik.
Donāt really need that much heat
Linpack alone can get to 96c. Surprisingly the 100% linpack load periods are colder and lot less power consuming compared to 75% ones.
I burn my cpu for heat 
Pc with GPU under full load can actually be comparably hot to some heaters 
Here just wood (and silicone) is burned for heat. Also no gas at all coming to house where I live.
Hmm, strange, one cpu code is lot colder than average, should I increase clock on it. Question is if I can just add +100 or sth since I am using different frequencies based on cores active.
I donāt. One thing is that I donāt like what they sometimes do with voltages. But also with 11900k there are not many extra gains even with custom watercooling.
Some cores get lot colder, any way to set +100mhz to set frequencies instead of per core limit with RKL?
tf are you trying to do
Increase frequency on ābetter coresā that get less hot
By less I mean almost 20c
but it's not like zen where two cores get selected as best cores and get thread priority
also you do realise increasing their speed will make the other cores hotter?
Sure, but there is some spaces for other cores to get bit hotter. Found that I can set per core frequency limit but donāt think that would help since biggest issue is usually voltage drop with multi core boost, and cores are already on lower frequency so it would not help for multi core workloads.
what
so you dont think its doing anything for multicore
but still want to increase some cores for multicore
The point is, settings only allow me to limit per core frequency, what I would need to do is increase frequency +100mhz for some cores no matter base frequency
very misleading headline
fabs charge by wafer not by chip
and a wafer price increase is in no way an equal price increase for resulting chips
Donāt get DVID. No matter what number I set, itās not dynamic, itās just added to voltage and no matter the load voltages stays as high. For example 1.2v vcore and 200mv dvid results in voltage being 1.4v no matter the load for some reason.
if using dvid leave vcore on auto
Yeah rather wonāt use it then. Since with my current frequencies voltages sometimes get high on auto.
just saying that is your issue
dynamic voltage is offset for the vcore
which means if you set both, they just add together
dvid is more for raising or lowering the auto setting
Ram unstable at settings it was previously more stable at again smh.
Thing is that itās not stable at same temps it used to be at.
Well it was not totally, but totally stable does not really have a definition. Basically it was previously stable at lot higher temps, and now errors are on lower.
Of course when you get more heat even very stable things stop being as stable.
ok, rephrased: you knew it was unstable to a certain degree, so changing things and then back to those unstable things is not guaranteed the same level of "sometimes stable"
thats how it is
Sure, but the differences are sometimes too highs. Also anything can be seen as unstable to certain degree. However previously it was completely stable unless under memory focused stress test which got it to 10c higher temps than normal usage. Apart from that it was stable. Now itās not. Nothing is completely stable too.
yes I don't care about a philosophy talk about it, you're constantly changing about every oc setting available so it's to be expected if something that worked doesnt work anymore is all I'm saying
and not something surprising
I mean I changed all settings back. So sometimes even without changing settings from boot to boot differences are pretty high, sometimes not
yea thats to be expected
Makes finding out which settings are better lot harder, especially with manually changing every secondary timing.
welcome to the world where we made sand smart
Now my modpac not only needs specific config folder since some world ids had to be changed an OTG, but also specific Java arguments that some mods need on windows, great 
Why am I getting errors I would not get on macOS smh
3 new errors with forge. Before it worked. Smh
good job
Only thing I changed was OS
Run Minecraft servers in docker
Of server, just client.
@wheat plume https://youtu.be/Vid8lIXmZwE?t=355
In this video, I'll tell you about my journey to discover the source and the fix for the Joycon Drift problem
SONG OF THE OUTRO (totally forgot to add it to the credits)
Super Bomberman 5 (OST) - New Worlds
⬠Chapters ā¬ā¬ā¬ā¬ā¬ā¬ā¬ā¬ā¬ā¬
0:00 - Intro
0:42 - What is the joycon Drift?
5:55 - How to fix the Drift
7:31 - Why the Drift Happens
Support m...
should ur cons ever drift
this fixes it
and is prob why my old cons dont drift yet
I'll try that tomorrow. I have my doubts though.
u can squeeze test
My joycon doesn't drift very consistently.
It just sometimes rarely go full north.
So... hard to test š
oh, I already knew this fix
u see i didnt
i added a 1.5mm self adhering rubber rubber sheet to it when swapping shells tho
cause i wanted my stick this tiny bit further towars the upper shell
Either itās multimc or windows but the same mods and config that work on macOS, donāt on windows. First I had to disable one mod on windows, then add something to Java arguments and yet it not work.
Would try non multi mc but canāt.
There is such a massive difference between different distributions for the Pinephone.
Manjaro regularly made it lose all of its battery pretty quickly. I couldn't even leave it unplugged over night because it would die.
Arch has been unplugged for 14 hours and its only lost 10% of its charge.
I'm thinking Manjaro had a problem with the default power settings.
Not completely sure but that big of a difference shouldn't be a thing when both of them are Arch or Arch-based.
Yeah... Idk either
I do have to say that the battery life is getting a lot better with every update. I was never expecting it to be this good.
I can sorta get that, kinda.
Though simply being able to do basically everything a laptop does with one tiny device is unbelievably useful.
Quite literally having the entire wealth of knowledge of all of humanity at your fingertips, it's something that people of 40 years ago would have considered a dream.
Yet this be the reality we live in.
I mean shit, it's something your average man in the 50s would think impossible. Tech really does improve quickly.
Certainly could be better, yeah. 
valve help

why does nintendo not do that
like
they could even have a pad on top of the module
to keep the console as slim as possible
a friend of me had drift for over a year now
and he uses them quite a bit
he never sent them in because he would not have them for a month
and new joycons are 70ā¬
the problem is even stupider than I originally expected

This shit is always scary https://www.youtube.com/watch?v=tF4DML7FIWk
Parkour is the perfect sandbox for the Atlas team at Boston Dynamics to experiment with new behaviors. In this video our humanoid robots demonstrate their whole-body athletics, maintaining its balance through a variety of rapidly changing, high-energy activities. Through jumps, balance beams, and vaults, we demonstrate how we push Atlas to its l...
For some reason monitor limiting DP to 1.2 fixed my strange issues.
finally, this monitor looks so much better
Yep, it's why I miss my Sony ux atleast once a month
Uh yes, this is totally the right name of this song

insert obligatory imagine dragon deez nuts joke here
Looking at the numbers I canāt say I am the biggest fan of hue much I spent on my pc 
speaking of big fans have you seen corsair's ll500 fan
they post about it on tiktok and I want it
Yes. Would be useful for my 11900k 
for anybody who hasn't seen it
Since MS Word started to make the document itself have a dark background, non of my diagrams look good anymore....
uml lol
holy shit
mansen
are you sure you'll be able to make rent after such a large purchase?
/s
oh dear
Back to pole dancing at the local chinese takeout place.
a tv for 40 dollars? is it 720p?
that is such a cursed statement
holy shit
Used Sony from 11. 32" with all the inputs I need and not a huge bezel.
back
Definitely not a thing boy tho.
š
I need the SCART and Component for the older consoles. Cause fuck spending a fortune on those retro upscalers right now š
Looks like the TV we currently have in the sitting room
Sony Bravia
has SCART port also
Not even a bad deal honestly. Probably on par with the 43...? inch Samsung we have in the living room.
Except obviously smaller š
Just tried folding at home. Apparently GPU better at it so only got 65000 points a day estimate. Issue is that after pc restart it stopped working. Reinstalling, different browser, nothing helps.
My 3950x when under load pulls close to 250 watts.
tf how much did you OC that
Yes.
Well it hits around 4.25 or 4.35 GHz on all cores.
I could've tuned it to every individual core but I was too lazy.
I mean almost double the stock tdp is impressive to run stable
I did modifications to my cooling setup to get it to work that well.
Mostly lapping the CPU IHS.
modifications? Do those perhaps include liquid nitrogen
https://edition.cnn.com/2021/08/19/weather/greenland-summit-rain-climate-change/index.html
This is what Fymrin means. They're melting the glaciers.
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
submerge a pc in a block of ice
Nope, this was on a standard watercooling loop. I was using a 360mm radiator and an Optimus PC waterblock.
Running the same OC on this 240mm Liquid Freezer Arctic II seems to be stable as well.
It doesn't run as cool but it does remain stable.
how the f*ck does one get that nice of an OC that stable?
silicon lottery and a seriously nice mobo?
Crosshair VIII Hero.
yeah
It isn't even the best motherboard on the market either.
definitely a nicer one though
I setup a lot of custom things in the BIOS.
Don't even get me started on my RAM overclock.
get started
something tells me it ain't just XMP
I want to know
One moment. Let me check the timings again.
16GB of 3600MHz memory running at 14-14-8-12-30-42 and 241 tRFC
I was running it at 3666 MHz but that seemed to be unstable. Going to have to test it again to make sure it's stable and wasn't just an OS error.
I don't know half of what you just said
must be quite impressive though
I got 16 gb at 3733 mhz, CL17
never found a way to get latency to creep any lower
It's an extremely impressive overclock.
Well, the memory overclocking community says it isn't that big of a deal but it's a big deal to me.
I have 48gb 3200mhz CL17 or CL18 can't remember which
Generally timings have more of an impact than frequency.
š¤Ø
what mismatch of kits are you using to get 48 gigabytes of RAM?
I had to fix a PC once that had a 16, 8, and 2 RAM config.
That was some super fucked up performance.
the only reason I'm using 48 is because I bought two 32g kits but one of the 16g sticks was doa so I used two 8s on that instead of an 8 and a 16
Ah.
A few weeks ago I saw a commercial for "vegan beeswax". I had to laugh.
You could say,
They grounded it
Setting folding at home power to light changes nothing
so i finally need to use the fucking female-female ethernet adapter
flat iām renting has a PAINFULLY short ethernet wire
the router is supposed to be hanging on its power cable lmao
canāt really do that considering my router has a hard drive in it

need those way too often
dont u just have a shitty igpu
Yes, but itās working on cpu. Get up to 87000 points a day estimate consuming almost 300w. But wish moderate mod would decrease it a bit to like 230w for lot lower temps.
AMD, methinks.
Or maybe infinity fabric would be detrimental to FAH.
Idk. Thatās been tested, yes?
easy fix just do the math manually by hand
It would if I didnāt overclock
Just teach the Asian kids with FAH problems. Easier fix. 
Thatās the biggest lesson in life.
idk why u complain then
No matter who you are, no matter what you do, there is going to be someone in Asia that actually destroys you in it.
The work ethic over there is nuts.
shrugs My point stands.
ok so
Itās not unlikely that thereās someone out there thatās basically you.
i can just kill myself
Hells no.
hells yes
For self explanatory reasons hells no.
an asian guy will just replace me
M8.
Iām like 99.9% sure I have an exactly 0 percent chance of actually locating this theoretical Asian dude.
Probably exists in the same way aliens probably exist.
ill bet on the .1%
Because games consume lot less power, or even normal benchmarks. So I would have to go too down with clocks for other things. Almost nothing else eats over 150w
No
Microsoft is so annnoying with the browser recommendation. Literally worse than apple in this way with customization.
And on windows 11 there are even multiple settings required to change itā¦
i havent been happy with the networking on win 11
I haven't been happy with the forced thicc taskbar without any labels
lmao yeah that too
I'll just wait till 2025 when it's hopefully fixed and tuned more than it is now.
Small correction on my part as well, there is no need to hit "more options" to see rename. Rename is now an icon on the main menu and I didn't realise.
Regardless, I went back to Windows 10 for now.
Edge browser do be pretty good though. If it was old edge or internet explorer I could understand the outrage.
He has a fucking ghilli suit for this video :') https://youtu.be/cPbKsX8uzUI
Destroying RC Cars in Creative Ways, including smashing through glass, jumping through a ring of fire, with axes and chainsaws, a bed of nails, a three storey drop, and strapping them to fireworks. The Ferrari, Tractor, Monster Truck and Toy Blue Car don't stand a chance!
Multiple.... wtf
No matter how good the browser is, still the way itās done is justā¦
It gives more control honestly at the end of the day
need 4 meters of ethernet cable, do i have to buy anything fancy or do i just say fuck it
Eff it.
AS Mansen said, if you don't care, than f@#$ it, if you do care, feel free to go fancy, they won't really be that expensive anyway.
Just join 4 1 meter cables with those female females lol
or just get/make a 4 meter cable like somebody who isn't a psychopath
or you could get a 12m cable and have it go there and back and there again
Tie it in a bow
whatever floats your boat ĀÆ_(ć)_/ĀÆ
sorry for asking, but where are the wooting keyboards being produced ? (origin of the country)
im just curious
Mainland China. š
Like... well... almost all other consumer electronics really š
oh thanks, i kinda guessed it
didnt they move parts to taiwan or was that just the wrist rest?
would be interesting to know how much it would cost to make keyboards in europe
Given how many tiny parts need to be produced in China anyway... probably a lot š
You'd mostly be wasting money on import fees, still needing to visit China.
Let's say everything is made from Wooting down to the smallest circuits. They'd need a massive EU based fabrication plant to make everything.
And that's assuming they could license all of those components - Or spend a ton of R&D on creating clones š
oh i see, i wasnt aware of that
Pretty sure the only the military is making electronics with no Chinese parts
Not even
No Chinese manufactured ics
But the case, secondary risers, and plastic components are still made in china
As I said
Depends on the device and manufacturer
Some are 100% us made and sourced. They get a bonus factor on contracts for it.
It's how Intel/ti/etc can operate us fabs
They get massive bonuses, tax breaks and incentives for us made products for the dod
Intel has us sourced only chip for secured machines
As well as motherboards and memory
HP and Cisco have us made networking equipment
Intel also dose ASIC for secured devices for DOD
Dell HP and Lenovo all use those guidelines for made in USA products
HP 100% offers us sourced only equipment for large customers
As I've handed it before
They come in different packaging which is holographic sealed entirely
They are like 3~4x the cost
Cisco offers it as well
If you install Linux onto a portable SSD, like those ones that plug in via USB
Could you essentially have a computer you can carry with you? XD to boot into at any computer?
Tails does exactly this. It resets all of your files each boot and is intended for people that need that functionality like journalists.
Ehhh not really unless Nvidia seriously molests your system
im sure if windows can do it, so can linux
hmm...Yeah, if its install on a system with nvidia drivers, then it may not boot on a system without a nvidia gpu
You're still going to be installing drivers every single time you visit a new system though š
And it doesn't work all that well on Windows to be fair.
Yeah, I want TAILS but permanent, like booting into your desktop computer but on a different one
You generally don't "install" drivers on Linux systems though
If you install the actual operating system and not a live image that could technically work.
Thats what im saying yes
Of course you do. š
Since 99.8% of the drivers you'd ever use are always included unless you use a really minimal distro
Just because it isn't a bunch of fancy wizards, doesn't mean you just have all of the drivers pre-configured for every setup.
Just know in advance that drivers could be an issue if you swap it between PCs a lot but I'm sure you know that already. Other than that, yes it should technically be possible.
i think the nvidia drivers might be a pain
and wifi maybe
Luckily, I have not had wifi problems on my of my devices with Linux
But my friend had... he had some cheap ass USB wifi card and it barely worked even on Windows
He eventually got a PCIE Intel card
Avoid the USB WiFi cards. I had one where a hotspot was required to download the driver and get it to work.
Yeah....
They shitty
I am trying to find the card he got.... it was some chinese brand
The official driver from the company website breaks the Linux kernel for me. Literally doesn't boot with it installed.
o.o
Yeah if it's not in the kernel it's probably of dubious quality
I had to find a really stupid version on GitHub.
M.2 wifi card....wut now
Yes, newer laptops tend to use those
o.o
not even newer laptops
M.2 is after all just a different looking PCIe
my HP netbook from yester-decade has one
Does it matter what antennea I use? Cause I dont like the one my mobo came with, I want ones that screw onto the back instead
oh right 10 years ago was 2011 damn feels like last year
o.o
NVME is anyway š
M.2 as a socket not so much.
NVME is the standard for PCIe storage devices yes
I must see what the max speed for this is.... hmm
I cant use 5GHz cause my Switch no like it :/
I dont even hit the 2.4GHz speed anyway so yeah...
Lifehack : Use both
Ah yes - We've had this talk before. Use ethernet :3
If I could, I would
The house I am in next semester has real speedy wifi
Need a dock.
You uh... you DO know access points can pick up wifi and give you ethernet ports. š
yes
Avanna is about to become the flash in terms of internet speed.
Well, when the semester starts that is.
I like the Manjaro GRUB theme... This is nice
nah, its like 30MB/s
Manjaro just looks nice in general.
Better than mine though
30 MB/s is still plenty though. I only get around 10 MB/s and it's fast enough to download a lot of games quickly.
Is LibreOffice using QT? Cause it looks far better in Plasma than any GTK desktop I have seen
It uses its own widget toolkit that pretends to be GTK or Qt depending on what you prefer
its a jpeg
oh..... hmm
My landlord is paying for 600 MB/s download and upload but doesn't know that her router can only handle 100/100.
The speed I said above is my steam download speed. I don't know why but steam never uses my maximum download speed even if I tell it to.
He was paying for real speedy wifi but since he had 16 houses in the estate and only ONE ROUTER IN THE MAINTANENCE SHED
IT WAS SUPER FUCKING SLOW
Otherwise it's somewhere around 70 MB/s if I remember right.
each house had an Access Point but no router
How did he think that would be a good idea?
Eh that could work well assuming the APs were connected with ethernets
Get each apartment their own internet plan OR get a custom internet plan and share that with access points over ethernet.
US is calling, stop copying their infrastructure
The thing is.... one day I saw the ISP van in the car park and I assume they took a look at his existing system and just didnt bother to tell him get a router for each house?!
That was when he swapped provider
Sounds like laziness or they didn't know.
Eh sounds like someone who thinks WiFi is just magic wireless who even needs cables
I don't even trust wireless for a mouse let alone my internet.
:')
If this mouse breaks, idek what id get to replace it
cause idk any other mouse that stores settings onboard
Glorious does.
and has buttons I can assign to media controls
You have to hit apply in software and then it saves in the mouse but the media control doesn't work in Linux.
you're currently describing about 90% of mice on the market
Ah yes Glorious hardware needing special quirks in the kernel how wonderful
That does not sound glorious
My solution in the future will be a 60 HE keyboard and a separate custom 20% keyboard for all media controls, OBS scenes and all of that stuff.
š¤
Preferably with a dial for volume control.
Why not
larger = better
It should also do your taxes
I'm a masochist or something I don't know.
please not a planck or preonic
I've tried a planck before and I can't make it work
it's just...yikes
You both need this https://youtu.be/sVInBOLSqoM
men, i've found my endgame.
I've searched far and wide, sailed the seven seas and climbed the tallest mountains. I've traveled to the edges of the world, and tried everything from Cherry Reds to Holy Bobas. All in a vain pursuit of this beauty. No matter what I did, no matter what I tried, I never felt satisfied. I thought I would never find my ...
Apparently the 40% market has grown considerably.
The spacebar is an upside down shift key xd
staggered...small form factor for maximum pain...meh
sounds too good
that but with outemu blues maybe
it sounds soooo good
and a really really shitty stab for the spacebar
Is there a form factor smaller than 40% for a proper keyboard, not a numpad?
uh, I'm sure someone has done a 3x5 per hand split
Yay! More reasons to potentially hate my past self for making bad decisions for future me!
ben valleck iirc
name something like that
This video is a walkthrough of my new 36 key layout (almost 30%!) that I'm using on my Moonlander split ergonomic mechanical keyboard. It also adapts well to the Planck EZ and of course any other customisable mechanical keyboard.
I actually removed all the keys that I'm not using from the keyboard here which is a pretty interesting way to set ...
the pain
After a little while of testing my 36 key layout ( https://youtu.be/S0bBmcoVsm8 ) on the Moonlander I knew I had to figure out a way of getting it to work on the Planck EZ by ZSA.
There is an issue of course in that my minimal keyboard layout heavily relies on having a key to each side of each home thumb key. But the Planck only has a single ke...
let's one up that
fuck spacing out your shoulders
more pain

Something tells me Doge enjoys pain a little too much.
@wheat plume Why does that keyboard sound good?
cherry housings are great for sound due to the nylon material
That keyboard is so small it doesn't even have a layer key.
with a thinner lube and actually decent stems, you can get some shockingly nice sounding switches
I'm waiting for a company to come along and create a keyboard with a 60% size, a 4k OLED display, SSD, hard drive, power supply and other stupid stuff.
Basically an all-in-one but in a keyboard form factor for no apparent reason.
With an attached screen for extra anxiety and self-hatred.
pretty sure apple did as close as they could with the tech they had...40-ish years ago with the apple IIc
ngl, I want one
Imagine that but the display is just a 4k OLED going straight up.
I forgot I got ice cream at the fast food place and its still in my fridge....
Time for melted but still cold ice cream
it's virgin
untouched
I'd feel dirty using it
and worst of all, I know there's amber alps in there

I do that all the time with Dairy Queen Blizzards.
I think they capitalise the Blizzard name but I don't know.
They have good chicken strip baskets.
wait wait
Actual chicken, not like chicken nuggets from McDonalds.
I thought they were jsut ice cream and things
ooh
Mushroom swiss burger and the chicken strip baskets are my preference.
or if I do, it's whatever decent ramen shop is near
I mostly stick to places I know but sometimes I try new things and enjoy it.
sounds like diabetes
Mint Oreo Blizzard.
dark chocolate. 90%
Ignore the misspelling of the word. I'm not dumb I swear.
100% or you haven't lived.
I've had 100%
it's actually amazing
oh jeez
mess food is always awful
š¤Ø
I have never had decent mess food in my life
I don't remember the brand but there's a store near me that has 100% chocolate on the shelves.
I might get some just so I have a little treat for myself from time to time.
nope
not cool enough for that
WTF
it was a dice roll if we even had chocolate milk
and you fucks got ICE CREAM???
I don't know of any places near me that make good milkshakes other than maybe Denny's.
well then, you got your opiates and your fountain pops in the same place
very nice
I can't even trust someone I've known for almost 3 years and some people I've known most of my life. I have issues.
I'm going to go see what the local cafe has because I've never been in there before.
I only discovered it a couple of weeks ago.
I'm just scared of trying new places sometimes but this time it should be fine.
(to be fair, there was this Jamaican place near me that I've walked past almost every day for my entire life, just set foot inside a week ago and ordered some oxtail, was actually quite good. TL;DR, I really shouldn't be throwing rocks in a glass house)
Be right back, going to see what they have to offer!
the liquor store?
If they have sandwiches I may be a while. I always take a while to figure out what I want.
The local cafe.
ah
well then
have fun!
wear a mask or I swear I'll cross borders and oceans to break kneecaps

They have bubble tea as well so I may get some.
I wear a mask everywhere I go, even if I'm on the sidewalk. You can't force me to take the thing off.
yus
just like me, outside the house = mask
even if I'm still on the property line, it's 4am, dark, snowing and no one is around
š
I may have a problem
I figured that out already
No need to cross oceans or borders.
Knowing where people live you're probably in Ontario or British Columbia.
Almost everyone is from one of those two.
noice
Winter sucks.
you said it
it barely snows here anymore
haven't had -20 C in...5 years or more at this point

We get way too much snow, normally the really bad stuff everyone hates.
Normally -40 degrees Centigrade on a regular basis. Some years it's more mild and -20 degrees Centigrade is normal.
lucky bastard
Mild years are rare.
Recent years have been so brutal that they cancel school and even close businesses for a few days because it's so brutally cold.
There's always businesses that stay open but the point is winter sucks here.
Do you enjoy the brutal sub-zero temperatures or something?
You are an absolute masochist.
I'm only 649 years old and I have arthritis!
Definitely not using that as a cover for my real age.
all elves live to at least 500, most to 750 or more, so you're fairly old
arthritis makes sense at the age of 649
š
Thanks Doge, good to know I'm normal.
Look carefully on the risers and sheet metal
It may be assembled in the USA and the motherboard and CPU too, but a number of the parts are made in china
And yes even for the made in USA units with the fancy packaging from dell and hp
They literally say on them made from 100% USA parts and materials, so I doubt they would pull a fast one.
š¤·āāļø it took patrick 30 seconds to find one
All the fans for example are made in china
STH Main Site Article: https://www.servethehome.com/hpe-proliant-dl380t-gen10-trusted-supply-chain-server-teardown/
STH Merch on Teespring: https://the-sth-merch-shop.myteespring.co/
STH Top 5 Weekly Newsletter: https://eepurl.com/dryM09
In this video, we delve into the HPE Trusted Supply Chain offering. Specifically, we look at the HPE ProLian...
China is forcing taiwanese manufacturers to say made in roc for their parts
And roc stands for republic of china
so thats where rocM is used 
Also that isn't want I'm talking about. That is a cheaper version that is off the shelf. The DOD ones come in a antistatic bag that is holographic/tamper resistant
They come with a BOM with company name and traceability for all major components
They also have almost zero expandability, or accessible ports
The trust supply chain stuff is more for SIPRNET or JWICS
But not NSANET
Or other secured networks
š My chair: https://amzn.to/3D2J2Jb
š WSJ article: https://www.wsj.com/amp/articles/parents-beware-nerfs-newest-blasters-wont-fire-knockoff-darts-11569240001
š Nerf fight: https://youtu.be/AwZCHKvM4BA?t=53
š This video was recorded with the following:
šµ Camera: https://amzn.to/3eO58my
šµ Microphone: https://amzn.to/2GoiSb0 OR https://amzn.to/2W1...
That's just dumb.
noice
Ohh now it just got personal for Louis
Real personal xD
I stopped caring when he explained the problem.
New type of nerf dart. Old ones can break it. Block old ones.
Cool. Not really something you can tie a parallel to Apple to.
if you let one company get away with it, more follow
Mansen
they aren't going to take my twin stryfes and retrofit them in a way to destroy my old darts, and they definitely won't for anyone else
just...use older blasters
I mean they ditched the new dart because parents and kids aren't smart enough to not mix darts. They had the same issue with the suction cup and the streamlime darts
the suction cup darts worked fine out of my front loading nerf blasters, like my firestrikes and my triad
but the magazine-fed blasters were a no-go
I figured that would have been obvious given how the suction cups are larger than the diameter of the foam and don't even fit in the mags...unlike the streamline tips
Fractal's Torrent launched to extremely positive reviews, but unfortunately, the company has discovered a potential short-circuit from its fan hub PCB design. It's doing the right thing.
Sponsor: Arctic Liquid Freezer II 280 (Amazon) https://geni.us/RJBy and Arctic MX-5 Thermal Paste (Amazon) - https://geni.us/EXf0I
The short of the matter is ...
This is how you do things right.
Hyyypppeee
hmm plugging in a new modem/router tonight... i need to backup the static ips i have configured
Use your blinkers.
Links 'n Stuff
Aging Wheels' video on my Figaro:
https://www.youtube.com/watch?v=HE2dKZ492TA
My old turn signal video:
https://youtu.be/O1lZ9n2bxWA
Technology Connections on Twitter:
https://twitter.com/TechConnectify
The TC Subreddit
https://www.reddit.com/r/technologyconnections
This channel is supported through viewer con...
I love his videos.
He had a blooper reel in this one.
This motherfucker man
best deez nuts joke of all time
If you have it in you https://www.youtube.com/watch?v=tURHTuKHBZs
It's all about the air.
Link to Part 2:
https://www.youtube.com/watch?v=F3rncxf4Or8
Technology Connextras (the second channel that stuff goes on sometimes):
https://www.youtube.com/channel/UClRwC5Vc8HrB6vGx6Ti-lhA
Technology Connections on Twitter:
https://twitter.com/TechConnectify
The TC Subreddit
https://www.reddit.com/r/technologyconnectio...
15:16 for the lazy and unappreciative
That was a pretty good video.
Have you seen the microwave and toaster that are better than yours?
The toaster is from the 1940s and consistently browns the toast on both sides reliably and not only take the bread down automatically but also pops it up automatically. The microwave had recipes, cook timers for complicated meals and sensors which made sure that meals were cooked correctly and evenly.
The videos are better than what I could explain.
toaster yes
and I want a new one that does the same thing
I want one like that, but burns in a darth vader pattern as well
because stupid and pointless novelties are the best
The toaster has a cult built around it where they swear by it being the best thing ever and it's so easy to repair with the single failure point being available almost everywhere.
Youtube: https://www.youtube.com/watch?v=1OfxlSG6q5Y
Invidious: https://yewtu.be/watch?v=1OfxlSG6q5Y
He covers what toaster's name and brand is, when it was manufactured, how it works and how it can be fixed.
Mhm. Made in the 1940s if my memory is right.
Discontinued in the 1960s or 1970s because the toasters not only lasted a long time but needed one part to be replaced to fix it if it stopped working.
Basically they made such a good product that they went out of business.
:(
I would seriously want a new old stock one
my toaster consistently burns my bagels and it pisses me off
@digital cliff had some recent issues with a toaster. Maybe you want an antique toaster like this one?
Well considering it sells your data I would say it does.
i need to know why people blindly accept eulas and tos just to later cry about them doing what they said theyd do
Because reading sucks
EULAs are typically filled with legal speech that few laymen can understand, much less do anything about.
You really do either need training or a lawyer to get through most of em.
uh only an idiot doesn't read the EULA before clicking accept
Are you kyle broflovski?
Very, very few people read a EULA before agreeing.
That do be the reality. Pognāt
which is why EULAs are not necessarily binding in germany 
My comment was nothing more than a reference to the south park episode about Apples ToS
ik
I had to accept the one from my bank without reading it because the bank assistant was helping setup my account and the eula was legit like 3 pages long
I didn't want to be sitting there for an hour with them
:/
Hide mein kampf in ToS
Wait to see how long it takes for people to notice
Get free promo in the media
Profit
How do I make Youtube Music regenerate my music playlist image?
cause its using album art of a song I no longer have in the playlist
Two of them arent in the playlist now...
fml
I looked up how to change it on google, and it just says put the song you want it to be the image for at the top
THATS NOT WORKLING
it picks 4 random songs it seems
Survivorship Bias, yeah.
You can't really. I play the playlist, then move two songs back and forth, after that you can save it as a new playlist
GPM was superior in every way to YTM
Speaking of Nirvana, y'know the baby in the album cover there grew up and is now trying to sue the remaining members for child exploitation and trauma.
Life is sad.
Yes, cause he is salty he just got $500 for being on the cover
AFTER he used it to boost his only worth in life
He really enjoyed doing that and wanted to replicate it now fully grown
he literally has the album title tattooed on his chest
wow
I think he did recreate the cover
at least he isnt naked in the recreations
Anyone know of any software
that will just rip everything from my phone
vs me manually dragging etc
@pale sigil What phone?
Android
Mmm.
Like you normally would :p
but the problem with accessing as a drive is it does not index files
unless you manually view the contents
moving stuff to a new android phone is a bit of a pain.. :/ there is android backups (built in, enable it)
and then the storage is just moving the files over. you can do that with any file manager and file sharing (smb/ftp/sftp) thing
same thing applies :p
you can also use usb transfer
but.. that wont backup app files/settings
anyway.. i need a new AP to fully ennjoy my new internet speeds :/
dont forget the one time password stuff and steam and.. everything else
Because Google wants you to use ** the cloud** for all your data, nothing else
sigh
Yeah.
and ofc
The Official Mi device desktop client
does not work with my phone still
xD
Read the article: https://blogs.gnome.org/tbernard/2021/07/13/community-power-4/
Join this channel to get access to perks:
https://www.youtube.com/channel/UCv1Kcz-CuGM6mxzL3B1_Eiw/join
You can find me on these socials:
- Odysee: https://odysee.com/$/invite/@TheLinuxGamer:f
- I am an Odysee partner
- Twitter: https://twitter.com/gardin...
This :')
same

I agree, BUT, so many important things on docker that need saftey updates, I kinda want this just to prevent people from human stubidity
the snooze button is still there
But wouldn't you run production on real Linux servers and none of this Windows nonsense?
see, asshole design worked on you too
Imo do whatever you want with a free product as long as all the problems go away when you pay money
If it's too problematic people won't use it to begin with š¤·āāļø
what was the last time you paid for a subscription to skip an update though 
i never pay if the software straight up does annoying shit
Then show them who's boss and do the uninstall
You probably don't need docker in a professional environment then
uninstall?
Ah yes so still using garbage software
if only there were alternatives
It's a free market fam š¤·āāļø use something better
Podman
Aka don't use apple
That too
Then don't complain about expensive software
Then you better enjoy that ecosystem
i am
At least it just works
i usually say that when i want to trigger somebody though
you like my apple product
Tbh I get using apple
I've got 2 MacBooks and an iMac within arm's reach
Not to mention my work phone is an iphone
If you want a curated experience for technology it's amazing
But I personally like to own the equipment I paid money for...
Why not resolve?
whatās not basic about vegas
or Avedmux
Vegas has garbage ux
Resolve
Blender kekw
Not any more :/
try after effects
Kdenlive is apparently nice but I've never used it
And it's a small install
It's not resolve but it's light and small
After effects is the most painful video editing software I've ever used
Id rather install windows movie maker
Windows Photos app kekw
Or that
Try kden live it's 80MB
Bomb?
What
God a numberpad is so nice
Just got my he and a calculator button + numpad is fantastic
pretty neet
ty
enjoy the ear rape
Oh @wheat plume its the KDE team who work on this
Work on what?
Use Microsoft's time lapse software to speed things up it usually looks way better tho it depends
KDEnlive
Oh yeah
I love kdenlive ā¤ļø
that i can find
It's a bit old and it might be android only
huh?
Hyperlapse
That's what it's called
Hyperlapse pro is available online somewhere and Microsoft put a key code for it on their forums somewhere
If you remind me in like 4 hours I can get you a copy
X-Kom takes advantage of NVIDIA GeForce RTX 30 LHR launch, offers lower SKU for outstanding non-LHR orders An extreme example of a retailer taking advantage of the market situation. Over the past year, we received hundreds of emails from customers who have had trouble with their graphics card orders. The issues mentioned in those emails [ā¦]
I wish kdenlive wasn't so fucking unstable for me.
Retailer does scummy but entirely legal thing.
More at 10.
I dont think them falsely saying its the same performance is entirely legal if one would go to court for that?
Oh I just skimmed it to be fair.
THAT isn't true. š
But cancelling orders is not illegal.
'exactly the same performance as its predecessor'

so personally I think they just made a mistake and had this form for everyone non lhr card and messed up this 3070 model with the 3060 mail
or thats how they are hiding it if someone comes after it idk
Finally... it updated the playlist thumbnail
the stuff you care about lol
Finally, some good fucking charts
yeah, cause I dont want a naked baby part of the thumbnail when the song from that album is no longer in the playlist
Heat map charts....
where color and size show the same data
If you saw the whole chart, it has the x and y axis labels and a legend
and if you hover over any dot it tells you the x and y values
even the file the data comes from!
Amazing
x axis: var 1
y axis: var 2
color and size of dots: var 3
yes brb hovering over a specific dot in that huge clump
ikr....
i dont design the charts, I just code and document them
If they want a heatmap, i aint arguing
Other than the fact this library is fucking POINTLESSLY DIFFICULT .-.
It calls plots "traces"
and the entire chart as a whole as the plot
fig["Layout"].update()
LIKE WHAT?!
why is blue off by a half chart?
Different bin range
blue 18.5 - 19.5
red 18 - 19
etc
This is terrible presentation design but hey, I was told to point to the things im referring to with arrows, so not my problem
Ok, this is peak bad design...
oh?
bought 15m cat5e and a f-f adapter
aha
heh, i got a similar solution for my poe accesspoint
Why not both
lol
True
I pickd orange at first since i change font color ot orange for key words
Since normal text is blue
you gonna present this over a videocall?
or irl?
make them thicker and high contrast
Videocall i think, its not me presenting it
Thats my supervisor's job
If I knew how, id make the arrow only appear when you hover over the keyword
:O Hollow leg reveal
thats not a desk lol
is the sub your chair?
the what
subwoofer?
subwoofer
not the sexslave
that is.. the pc case
ah, lol.
honestly, if there is a sturdy enough PC case, id use it as a chair
Yeah
I do
my room is freezing
the top of my PC rn is pretty cold, cause im not doing anything heavy
Well, I have two virtual desktops of mostly Chrome electron apps open
Thats heavy on ram lel
LOL
why the fuck are all hdds spinning
O.o
6gb seems like tame usage of ram nowadays
i have 4 and windows really seems to like them all
Yeah, for windows it isnt bad
o.o
discord
wut
yeah windows doesn't care about using ram efficiently if you have shitloads
wifi lol
do you have WSL running?
As has been said before here, you can absolutely mount it through WSL2, it's gigascuffed but doable
š¤
wtf
heh weird.
putin needs you to seed that torrent for him 
i got 500down and 60 now.. but i cant get it as i have a wifi N accesspoint
Can WSL do GUI apps? I saw somewhere it can





