#🔌│tech
1 messages · Page 665 of 1
Its a new windows install
I did memtest a few weeks ago
Was fine
Weird it only happened today and I've had this new os/mobo for over a week now
One thing I was doing was downloading a game and using rvnc
Can still be drivers then
It doesn't happen when I'm using my desktop, only seems to happen remotely, could it really be vnc?
However I've noticed the last few months my monitor will randomly go off for a second and back on.
I just assumed my monitor was dying as if made a pop noise
Nothing ever happens when I'm gaming
Tbh I'd hope it's ram because I can rma it
You sure? They could just refund you and keep the ram 
Also it only happened after moving to the newest windows
Yep
Good luck trying to argue you need the ram to use the pc
Can they refund me when I didn't buy from them lol
I didn't buy from gskill directly
So?
The webshop will refund
Not gskill
Gskill will probably tell you to contact your vendor
Afaik the vendor doesn't need to do shit after 6 months here
It's entirely up to the manufacturer after 6 months
Reddit seems to indicate they are replacing kits
it highly depends on what the vendor and gskill have negotiated in RMA cases
Don't you still have EU rules when it comes to that? 2 years vendor warranty? 
Not really no
It's pretty lame, it's technically longer than 1 year but it's weird

Anyway, not gonna panic
It happened once in one week
Last time it happened multiple times a day, always when I wasn't using my desktop.... I do think something fucky is going on with vnc maybe.
Because it's always when I use my desktop over vnc and leave it idle because I don't disconnect
Given it's a newest Windows it may also be something with that, given MS released like 3 emergency updates this year alone 
If is Windows why not RDP? 
And it only started happening when I updated to 25h2
Because I don't like rdp, idk how it is these days but rdp used to require being logged out of the desktop itself.
But also vnc is widely supported and super smooth.
If it keeps happening I'm actually really annoyed and might force myself to go Linux
I was stuck on an old version of windows for ages because the next version was unstable on all my devices
Works quite good nowadays 
I use it with KRDC, works nice 
In NL its even better, 2 years mandatory and you can argue by law for it to be longer than 2 years depending on the segment the product falls in
Same here, UOKiK (consumer protection agency) is very effective when it comes to that 
I've slowly come to terms with that this is just how the future is
nothing works properly and everyone wants to fleece you of money
PWEEEASSE SUBSCRIBE TO OUR AI 365 PLAN!!
openrgb kind of sucks
so my apple has a 2 year warranty!? So after I eat the apple I can say that the apple was defective and they will be forced to give me another apple and I can eat that apple and then keep repeating the cycle!? Omg infinite money glitch!!!!
Use signalrgb then
FiiO built different 
1.5 year since they released their cheap-ass 50€ Echo Mini, and still there's an update every month with fixes and new stuff that community wants 
openrgb should be pretty good with wooting keyboards, i cleaned up their implementation of it recently
Pretty nice. I mean. The dac chip inside is pretty good enough already so it's cheaper to just keep selling it.
the one time I updated a fiio device it started popping and buzzing and then I had to dig through chinese forums to find someone posted the older version
For Echo Mini they have all versions of firmware on website, and you can downgrade as you please 
Here's a rant about Apple's new Liquid Glass and the Flat Design era that preceded it.
Thanks so much for watching our first video, it's great to be back! If you liked this video and want to support our new channel, we created a Patreon where we post behind-the-scenes content and give you an opportunity to be a part of future videos.
https://w...
they are pretty transparent ba dum tst
This is a great thing to admit while also jacking up the prices of your services.
that guy is ex-LTT
So - they didn't say they were coding without AI, because most likely there's an "Technology Innovations" team, for which main KPI is how many people use AI and they've been given a ton of power, so everyone just lies
That's exactly how it is at our corpo 
Ok so maybe just maybe
If all developers are super charged now, thanks to AI.. can we have well made software?
ha ha ha...
Or or lower prices for services?
When you are young and naive and on first year of uni you think that in big corpos they write beautiful and readable code
Once you work at corporation you realize you wrote better code on first year 
But if they lower prices they can't afford the AI subscriptions!
Also - interesting study https://www.youtube.com/watch?v=z3kaLM8Oj4o 
Artificial intelligence has been hailed as one of the most transformative technologies of the century. That may be so, but just not yet. In this episode, we take a look at a study that pits humans directly against AI for paid work. The results were surprising.
Study here: https://www.remotelabor.ai/paper.pdf
Website: https://www.remotelabor.ai
...
Windows 11 Update Conflicts: The January 2026 Windows 11 security patch KB5074109 is causing significant issues for many users, including black screens, crashes, and reduced frame rates (up to 20fps).
Fix for Windows Update: NVIDIA advises temporarily uninstalling KB5074109 via Windows Settings, or waiting for a permanent fix, to resolve these performance issues.
Mother fuckers
Laughs in 9070XT
I hate windows
Cries in random crash while I was working earlier today
I laugh in “where problems”
I laugh in not knowing if its nvidia drivers or windows fucking me over for the past year
My 9070XT needed to take a crap of its drivers like every other Saturday 
That said it was an okay card
laughs in windows 10
Microsoft dropping support for 10 was good thing, they won't break anything in there 
yesh, just hope rhythm game doesn't start requiring secure boot or win 11 lmao.
Old news
But like, most of the game are old so even win 7 is nice if I only play the older one.
I don't think it's the cause of his issue (bsod while remoting accessing his pc)
Well that issue was not really made clear until now
That said, maybe a clean graphics driver installation can help 🤷♂️
I did still suggest this cuz well novideo
If you're curious about what he gets
I mean... idk i thought someone may have ideas of their own?
Just trying to help 😭
I still think its just a driver issue 🤔 if this was the case with fresh windows install and driver install and memtest
Memtest was good and his windows install is fresh so
https://wccftech.com/china-largest-memory-manufacturer-cxmt-plans-to-allocate-a-large-chunk-of-its-dram-production-to-hbm3/ china aint saving us
That explains being unable to uninstall the update
Fucking windows
Sucks
No system restore points, can't uninstall update etc
Literally only started happening after a windows update
I'll try in safe mode later
System restore points are for old windows installation....
In other news
Unless you make your own
Which I did a few days ago
Well sure but like did the update come with it?
As I am under the impression, that you got the january iso
Not a bad idea, fab365 has some cool stuff designed by real people.
I have noticed ai generated models creeping up in printables.
Well you can try to get an update of February to see if it helps it should be out of preview by now and or maybe an older graphics card driver I guess if you tried with the latest
Otherwise the only left suggestion is hunting for an old pre 2026 windows iso and perhaps setting it up offline first
i have ditched the plate i will just 3d print a direct drive adapter since the new one wont work with the cooling shroud
Alright then
Yeah microswiss stuff be like that too
turns out a ender 3 v2 shroud will not work with a normal ender 3 bracket
ill just get this setup printed by a friend
That shroud is bulky makes sense
cant take the easy W ig :p
Ah nevermind would need to be remixed for the 3 v2
yeah but hey the plate was 3$ not the worst loss so im not too mad
yeah but we deemed its more work to retrofit that than to just print the different direct drive setup
Well fair
Hm, would have thought such things would have automatic doors guess not
Also saw a report that they more often than not are remotely driven, instead of AI. Even outside of "emergencies"
Sounds like a great techbro startup program.
OOO an Upgrade Glory Hole!
Best laptop ever made = has a feature that used to be standard?
ROG zephyrus duo?
or zenbook duo?
no zenbook duo
that looks too clean to be a zephyrus
sad times... lenovo used to have 3 screw holding a big ass panel on that slid off, dell used to have that as well but 2 of them were secured to the hdd and hp elite books had those sick massive chonk switches with 1 security screw that just slid the panel off
im going with this design tbh seems popular
still allows 3v2 shroud?
Managed to re install 25h2
which is before the shit update, hopefully its that.. .
🤞
Yep retains the oem stuff
alright
Hmmm
🤞 I haven't had any blue screens yet
crossing my fingers for ya🤞
yeah they're switching because they found k-ID to be unreliable iirc
its unfortunate that it has gotten to this point
Persona Identities is more reliable but more invasive
I remember having to use Persona for my Linkedin, it wasnt too bad.
actually was it persona?
I think it might have been CLEAR instead
okay thats just a pure clickbait headline
someone investing in the company doesnt mean the company now has ties to that persons other companies
americans too fat and lazy to close the door after getting out, unsurprising
I've only taken a waymo once and it was interesting
ok this keyboard is adorable
but whats the 1-6 about?! why not the whole number row?
https://youtu.be/ehoj2yXlbA0
Keyboard Kit
— Bullet Train
https://cannonkeys.com/products/bullet-train?ref=alexotos
— Switches \
KS33 Brown Switches
https://cannonkeys.com/products/bullet-train-addons?variant=44203540873327&ref=alexotos
Note: Some of these are affiliate links and i get a kick back! They help support my channel. This is a sponsored review, but all op...
Being unique
also whats with that analog mouse that logitech made?
Is it actually a heavenly gift as most people claim online?
Yeah its overpriced
avg mouse launch price lol
now with every other company racing to mass produce these at lower prices or better quality;
160€ on amazon
no it's not
Which is still overpriced imo XD
mice are very expensive for what they are
Ye but the 305 is always discounted way less than that
its still 60 euro on Logitech website but I got it on Amazon for 48
given they use a haptic motor from the clicks it sounds liek a downside
i like em...
Apple's are really good in their iPhones...
sounds like a good way to throw off your accuracy
yeah, especially since the switch is analog, its gonna not be accurate to the mm like it should be
and burn through battery
im not gonna go back to normal clicks 😅
o.o
Im watching a video comparing the 80HE to some competitors and hes really bashing the shit out of the default case
Saying that its an awful board until you get the aluminium case..... so the price is actually the base price + the metal case , dafuq .-.
keyboard people didn't seem to like it
I like mine a lot 
smoothbrain reviewers who thinks keyboards must have metal cases these days
mUh PrEmIuM fEeL
i think the zinc got hated too
I dont really like the alumaze I got, but its not the fault of the Alumaze itself...
Its the fault of my bedroom being so damn cold I can see my breath when I exhale and the Alumaze case feels like a damn block of ice
these brats wouldn't have lasted a day pc gaming in the 90s 
in a regular room, that has heating, its an amazing case and so pretty 😍
imo plastic is nicer to touch most of the time
so yeah, my 60he felt like typing on a block if ice anytime I was using it in my room XD
I prefer plastic too honestly, metal is just needlessly heavy and bulky
depends on the plastic ....
and sounds worse out of the box
are yall picking up the keyboard??
the plastic my cheap ass wireles board makes creaks and cracking sounds everytime I handle the board
needs more treatment
no but i rest my wrist on it and would prefer it not to be cold for that reason
it probably can, i have a haptic motor in my mouse but i feel it is a gimmick, i tried using it like a controller rumbl;e motor before on like m1
I do bring my kb with me to other places occasionally
the side mounted port is killing me
then its nice if it doesn't add 2kgs to my packing for no good reason
what would be very cool if logitech allows secondary actuations on press depth on the swiftpoint z the front pcb is floating so you can push down to compress it more into a membrane force sensor
just use a neurolink duhh
Or just use your CoPilot voice commands like a normal Windows user in 2030
this is also intutive in my opinion
dafuq is this?
manual calibration for z force sensors
they could theoretically do that
in a spreadsheet?!
yeah, later they made a version for the software
im so confused
i like this legacy version cuz one can fiddle with values to their liking
i will show you
but probably not their focus on a pro gaming mouse
how does a spreadsheet configure sensor data
Read what it says
I too am willing to use my keyboard as a defensive weapon
ooooo, I wonder if there is a way to build a little touchbar onto the top bezel of the 80HE
so you can swipe your finger left or right to change volume or whatever you want to do
probably, but i do not see wooting going for that
wooting knob
macbook touchbar 💀
yeh but it wont replace actual keys, just a simple swipe to trigger volume change or whatever else you think of
fuck having a software locked ESC and F keys.... 🤢
was that not a touchscreen on a non touchscreen laptop
but it can display per application information
yeh and replace your F row while doing so...
my drawing tablet had some capacitive strips but they feel pretty useless
wireless earbuds have that function these days
the huge esc key on new macbooks is awesome
my wireless headphones have physical controls and I LOVE IT
a dial for volume, a slider for bass / treble, clicky button to change transparency mode, another to turn on an off the headphones
its nice :D
I hope the swiftpoint z3 gets the superstrike treatment hehe
Ye
I will likely get the swiftpoint z3
Was about to get the z2 then they announced the z3
i still have my original z
only replaced the encoder, alps one is heavy and main microswitches and later again for m1 since it died after 5 years and the replacement was a dud
My main two games are Path of Exile and WoW
And I work in 3D, so it's also meant to be a workhorse for me
i wish they developed the cad function more
i tried to contribute a bit to that though maybe they have been busy in hardware
since we have pivot, tilt and rotate there could have been a small module for fusion 360 etc
Ngl, for 3D work I can't recommend the spacemouse more
The spacemouse is so good
can you please elaborate on this
It makes navigating 3D models and assemblies much better than a traditional mouse does
because of the joystick?
And also faster
More or less yeah
And also official support over a wide variety of software
that feels like a hard pillow to slowly on the swiftpoint side
it took a while for them to give resources for a linux configuration utility
they are very touchy about exposing anything software wise in a technical sense to the user
They are trendsetters like wooting, but they took the opposite road of wooting unfortunately for us
it would have been at least nice to have the gyroscope exposed is all in my opinion
as everything else in the control panel is well done in my opinion. looping functions, alterating functions, keyboard keys, mouse movement etc they just about laid it all except xinput
Hm, no SDK?
nothing
closest there is to raw stuff is the deep z calibration and exported profiles which can be viewed and edited in a txt file manipulation software
that is kind of crazy
Might email them later, perhaps they slightly changed their mind
They got detailed profiles for Adobe suite and that I am sure is great as is cuz 2d
3DConnexion has an SDK that basically exposes every input and output of their spacemouse devices
so it makes integrating them really easy
The swift point z team did a great job of plotting near all possibilities into the software thankfully
I had a inventor profile setup that was mostly great
Like I could tilt the mouse left or right a bit on the tilt feet to go forward or backwards on changes
But once one wanted to move an object through the mouse gyroscope I think I used 3rd party software
heck the spacemouse is supported in Bambu Studio of all things lmao
Which linked into direct input that the Z could do
That is very interesting
And here is the funny thing
yeah they support a lot of the popular slicers https://3dconnexion.com/us/software/?sort-by=featured&industry=3d-printing
The complete list of software applications that are supported by 3DxWare driver for 3Dconnexion SpaceMouse, CadMouse, Keyboard and Numpad.
I ran a profile with direct input gyro enabled, and used 3rd party software to translate it into mouse movement that the inventor would use
nice
Does that not sound funny though
its funny but its good that you found a solution
Oh I think I actually suggested them to enable that in panel I do not think they did to this day sadly🥲
I personally use solidworks the most, I have used inventor a lot in the past though
I wish I could use solidworks, I get the control scheme is different but it crapped out on after an update and I was nearing the renewal so back to fusion I went
Though solid works seems to not freeze up in my limited year usage of it
I just prefer the workflow of solidworks
its ever so slightly faster
Fair
Speaking of workflow siemens nx pissed me off
I also use NX for work stuff, its also very good. but hella expensive
I could import my step files into it
NX is good if you're a big business.
And when I did try using I could not figure out how to extrude a sketch drawing if I did not do it after it asked me
its very collaboration focused
that is kind of a skill issue but I get what you mean
I figured
It would force me to make a new sketch though I imagine it takes getting used to
Yeah, at least NX documentation is pretty good
🤣 I did not read it
I just like to figure things out so fair
No blue screens all day, I would say I can't believe the windows update might have been the cause of all this but tbh I'm not actually surprised.
@empty wren
@unkempt lake
She knows
my bad for the ping😄
Who can help me in vc really quick with my WOOTING 60HE V2
You could try saying the issues
It’s hard to say like on discord
every word you speak and be typed
so just type it, also the place for it is #1019755933959733258
ive seen multiple people having issues with the update but i havent had any, is it just luck or?
I've had it twice
Before fresh install and after
Both had the newest update
interesting
Flashbacks to me having reboots at random till I finally rebuilt the PC with AM5

other than wootility, are the mchose keyboards comparable performance wise?
best check rtings for that
and they just jacked up prices so lovely
espically after offer a 4 month free trial during new years
does anyone knmow how to stop the keys from turning green when i press them on the wooting 80he
it's a european company aswell which is weird
yes they are an embarassment for us
ceo is running it like a wannabe american techbro
local music player all the way, especially when smol good music player can be got for cheap nowadays
i cant find ones that can play FLAC ;-; unless I spend like 200 on one
fiio echo mini
flac is kinda pointless for a portable player anyways
modern lossy formats are well good enough
all my local collection is flac, so it would be a pain to convert them all to mp3....
has most that you need
oooo yes looks nice, lemme check the price
IT LOOKS LIKE A CASSETTE TAPE, thats so cute 😍
there's a fuck ton of other choice, feel free to watch youtubers like Super Review for other choice and review.
Ok, I need an SD card for it, its only got 8GB storage and my collection is currently reaching 12GB
I mean, 256gb sdcard is pretty cheap
flacs and it’s only 12 gigs
bro listens to like 5 songs
there's also this https://store.hiby.com/products/hiby-r1
Compact music player with a colorful experience; Sit well within the palm of your hand, with black / white / blue / green / orange colour options and strap lug for easy carrying; Translucent chassis creates a unique aesthetic; R1 Silicone Case ✨ Multiple colour options | Translucent chassis | 3” high resolution touchsc
single shell script to convert everything to opus 🤯
In any case, both are like $60, so it's no biggie if you don't like it
The official website links to AlieExpress and says its not available in my region :'(
where are you based on?
ooo HiBy, I bought their Miku IEMs recently
You can check Linsoul, they sell the same thing (along with others) and has amazon store across many region.
This HiBy one remiinds me of the old Windows phones, which is neat
I like this one a lot more than the miku dap, wireless dac in the same theme, no android on it, but the listed battery life seems horrible
https://x.com/hiby_music/status/2019340841316413575
New color just dropped 💙
HiBy W4 「Cyan」— now available at HiBy official store.
Only $99, don’t miss out!
https://t.co/wGnqP6mk3e
#hibymusic #hibyw4
cs43198 + own OS gonna do that to ya.
The HiBy has LDAC bluetooth, but i dont think ill use bluetooth on one of these cause I have my wired earphones and I love them a lot
Linux?! oki now im interested
mm yes, got to have that powerful penetrating sound...
things that needs that much power are usually more expensive, or people think having that much power makes certain headphone/iem 'sound better'.
Can the R1 be used as a usb sound card too?
I'm not sure, doesn't seems to be stated
cant find a seller for the fiio
not even linsoul?
o yeh thats on there
Yeah, I like how it looks but not looking to spend like 5x of my fiio btr11 for something 3x the size with half the battery life
preorder with unknown ETA 
I’m hawk eyeing the price of er2xr on amazon though
last year in march they dropped almost 20% in price so I hope that happens again this year
hopefully you can get good comfort with it
00:00 Introduction
00:11 Notes on the screen
00:22 Why the Stock Flanged Tips Didn’t Work
01:10 Shure SE846 Yellow Foam Tips
01:45 Final Audio E Multipack
02:38 Bass
03:07 Sub-Bass
03:54 Female Vocals
05:10 Male Vocals
05:57 Soundstage
06:25 Sibilance
07:28 Final Thoughts
Shure yellow foam:
https://www.amazon.com/Shure-EAYLF1-10-Sleeves-Inclu...
it has a section on how he makes it comfy
I already sleep with etymotic earplugs so I’m not super worried
triple flange
the 2s don’t come with the same range of tips and accessories as 4s though
wish I could try them all out
That’s a red flag
I’ve have a pre-order which is supposed to be coming sometime this month and haven’t heard much so having no ETA is baaaaf
yeh I know it is ;-;
also, COSMIC is getting a GREAT FEATURE in Epoch 3
I wish all Linux desktops did this
They do this for SD cards or USB drives, but not internal drives like a second SSD or whatever
only 12?
gotta pump those number up, at least dubles
though mine is only 28gb lmao.
At least I can fit it to my phone and not losing too much storage.
I cant get a lot of the music I want to get because the place I buy the songs from doesnt have a lot of the songs I like :'(
and I feel bad if I sail the seven seas because a lot of the artists I listen to only really have a fanbase on youtube cause they are just solo artists and whatnot
one of them do sell physical CDs of their albums but I dont want a CD, I want either Vinyl or digital downloads
so it offers 2 sources of equal quality and digital which could be anything really from flac/wav to shitty mp3
Buy a CD and rip it
Isnt that also considered piracy?
cds are a nice collectible too, I got some for artists I like
and my player can display the art in it
the whole "Playing the media on a device it wasnt provided on" thing
I miss when album SD cards were a thing, I had a lot of those
Just pop them into your phone and off you go listening to music instantly 💜
with these flash prices
I ripped my entire CD collection that started in '92:
this is a good idea though ....
if you use it for personal use in europe its not
who cares, you bought the cd it's yours then
No
Imagine me sorting through CD booklets...
Only if you distribute the file
oooohhh
Is there no website you can buy individual songs from the albums?
I know you can do that most of the time on Bandcamp but not always... I dont always want the full album
apple did let you do that back then , maybe google music awell
well
this is a legal grey area for a reason
its not that clear cut
in germany its legal to copy cds just illegal to bypass copy protection
its not piracy to archive your own media
piracy is aquiring files for things you have no rights of use for
aka you didnt even buy the thing
also "bypass copyprotection" is also a funny thing cause some drives just allow you raw read access which automatically bypasses copyprotections on for example UHD blurays
i might have done that to my bluray drive so it now can do that and read 4k blurays
doing it vs having bought it from amazon or such and it just came like that are prob also things you could legally go after
i mean technically i just installed a different firmware which is hard to prove that i did that in the first place as i bought it at a thriftstore
which most CDs have copy protection enabled....
lawyer please pull up the text message from the wooting discord
And this just proves the 3d printer firmware lockdown will not work
its 71 on Amazon but 46 on Linsoul, but Linsoul is a preorder for some reason and has no ETA ....
and Amazon only has the black model which I dont want, gimme pink plz
just saying that this is a public chat (that most likely gets scraped by some website we dont even know of) and its not really far fetched that lawyers use social media to prove things or at least try to prove things
I will never get over how stupid expensive audio shit can be at times....
yes but as far as i can tell its not illegal to downgrade the firmware on a disc drive itself
my firmware is self compiled from the ender 3 professional branch
You mean professional firmware?
yeah
Think I used that on the ender 3 I sold
it helps a lot with added support for bed leveling etc
I agree there
Funny how that is still being updated
Im actually retarded
Fiio have an EU Store too that I just found
https://fiio.eu/product/fiio-snowsky-echo-mini-portable-lossless-music-player-bluetooth
Yet klipper is at a stalemate more or less
There is ratos and there is also kalico(master and experimental branches)
my friend says klipper is the way to go but honestly im just using what works right now
Nah marlin is actually out pacing mainline klipper and actually input shaping and pressure advance exist in marlin too.
The potential nag with marlin is having to compile the firmware if you want to make changes. Klipper service only needs a restart to show changes.
Now if someone wants to have a reliable working system they may just use a version they install for a looooong time which then makes the above a QoL improvement rather than a necessity.
does it use ddr5 ram?
AAAA I love how adorable the Fiio is and the USB Soundcard feature is awesome but the R1 has nicer features, better UI and has larger SD card support but its uglier... xd
I like the fiio btr11 but I already have my music on my phone
Same, my phone has all my music on it already, but I dislike using my phone for that cause I get notification sounds interupting my music even on DND for some reason
Reprap firmware handles the printer and web interface.
Most mainboards are not suited for it. The appeal with klipper was offloading processing to a more powerful MCU which perhaps made a lot of sense on the legacy 8bit systems. Though now there are even 64bit mucus. It may not even be relevant to use klipper unless you wanna chase speed, which comes with its own downsides.
I usually just have people interrupting my music and those are more difficult to ignore
yee :/
If you want combine a bunch of boards together one would go either rrp with duet they use can fd or klipper with USB(you can use canbus if you really want to)
Same thing goes for Eddy current scanners. Marlin is perfectly fine otherwise
Though the trickery in marketing with klipper is they make premade configuration files on meh hardware, makes a buyer think... If it does not have klipper it bad mentality
Flsun superracer is an old printer, but it ran marlin out the box for example and was fast.
actually this is so android moment, on my last phone I'd have scheduled dnd for every night but I'd still get discord and youtube notifications for some messed up reason
I have some messages from specific people bypass DND via the conversations feature
Works on discord which is great 💜
it doubles as a self defense weapon
hmm ill see if i can do that aswell
you can actually use marlin with a webui with a secondary computer
you just use octoprint
hmm yeah ill look into that first im just doing direct drive
dual THX amps is fair though
oh and the ESS DACs
both of those are expensive af on their own
Sponsor: APNX V2 Case on Amazon https://geni.us/gLRAxD
Discord has announced that it will begin requiring government-issued ID or face scans for use of large parts of its platform, extending beyond its original compliance with UK ID Verification Law and various Online Safety Acts around the world. What we found disturbing was what seems to be Di...
is this just about the investors being similar or is there more? cant watch atm
Daps like these are just mediocre phones with the dongle built in
Waste of money in almost every circumstance
thats not a dap
thats just a DAC/AMP
that you plug in via USB
Oh, it looked like the backside of a dap
no yeah thats just a DAC/AMP
with bluetooth
So overpriced...
for a 3W DAC/AMP that is also THX certified its not bad
more a summary of the entire thing where thiel is a small mention in the beginning
I might be in the minority but I like the windows ui design
Western Digital has no HDD capacity left, as its CEO reveals massive AI-driven deals have consumed available supply. 🔗 wccf.tech/1jpc0

Well at least when ai simmers doen
Maybe a lot of used hardware will be bargain priced
What the fuck man
Pop the bubble!!!!🫧
Crypto miners sold their mining cards when crypto died down on used market. RAM stock right now is being bought by corporations, so when the data centres collapse it's not gonna be on the used market. All that RAM is gonna go to ewaste
Unlikely, HPC datacenter hardware isnt really usable to most consumers
Fair point actually
I forgot that part
Yeah, and a lot of datacenter HDDs use SAS connectors and not SATA that most people have
Can't wait for SAS to Sata from aliexpress to have 500+ sales
Most of those are bullshit anyways
They use completely different protocols
Can't just connect thing to thingy and expect it to work
This is just sad in general
History repeats itself again
It's because these types of special interfaces and protocols are specialized for datacenter specifically where high reliability and high performance is required
Whereas consumer systems have completely different requirements than that of the datacenter
I mean the fact that for a quick buck there will be ewaste
Yeah unfortunately
My 4tb ext hdd is holding on for dear life as my main home server drive.. really need to shuck it 
how do the 4 additional keycaps with the wooting uwu look are they blank or the same
dont crosspost
ok sorry
it is especially Hiby and sony brands
heck, I invested myself in a dongle dac with dual CS413131 chipset instead since I don't really need the screen to begin with
Oo
How well does the Fiio Echo Mini handle Japanese, Korean and Chinese characters in the song / file name?
I use 187MB already 🥺
can it handle a file name like this?
Dat a funky file name, friend 
If only there was a website where questions can lead to websites of people asking it and others answering it..
I heard it can crash if the file name has certain characters in it when scanning your library off an SD card :/
Who name their file 2-01 我最紅 中文字幕版 MV.flac
thats the name of the song xd
Ah 
and my fav Giga song 💜
yeh thats what im worried about, I heard it crashes a lot from certain fle names :/
yeh, its so pretty 😍
I like it
Im watching a comparison between this and the HiBy R1
Walkman when Runman
Running Man?
Walkman make one too

It quite expensive though.
I think some people selling them on eBay for like a thousand or something now.
yeh
the Miku Player is awesome too
but its expensive, more than my current phone ;-; so not worth it for me
ive used the g pro wireless for 3 years now i think but i thought abt buying the superlight 2 as an upgrade, i play lots of league, any recommendations if its a good idea or not ?
i wouldnt even consider the superlight 2 an upgrade 
People are saying in reviews that the Echo Mini cant be used as a USB DAC, But on Fiios own marketing page it says it can
why
id consider the following a lot more than the gpx2
- wlmouse beastx
- lamzu maya x (if you really like that gpx shape)
- pulsar crazylight series
- razer vv3p
- hitscan hyperlight (small mouse)
thank you
theres like what? 1g weight difference, shape is idential, side buttons are the same mushy garbage, im not sure if they changed mouse clicks
they did finally add a dust proof scroll wheel after cheaping out on it for years
8k polling but its not really a selling point imo
and the superstrike?
well i dont like the superlight shape so its automatically disqualified
everything besides the shape from superstrike
i wouldnt even buy it to try it out at a $180 price tag
its front heavy
same mushy side buttons theyve been using since the original g pro
thanks for help im considering the beast x
Hello! In this video I am going to show you how to reject a forced Windows Update and potentially save your computer from a sloppy vibe-coded «fix of the failed fix» package. I'll teach you how to take control of the power options under your Start Menu. This method works for all Windows 11 editions, as well as all editions of Windows 10.
Let'...
the software do need some fixing with reading song/album metadatas
iphone 17 air seems like a complete flop its not even being sold in finland
peak phone
no one clearly
its too early
then you would have thick phone
Both of Linus' kids xxxddd
i hope they keep making and improving them
DeleteMe International Plans: https://international.joindeleteme.com/
Get 20% off DeleteMe US consumer plans when you go to http://joindeleteme.com/LTT20 and use promo code LTT20 at checkout.
Linus has had his fair share at picking and testing all types of phones, BUT if we let his KIDS pick their next phone, which one will they pick? iPhone, G...
well, the choice wasa between 7 phones xd
I’m pretty sure the edge got discontinued
I haven't watched that video because phones are just that boring
phones suck
i only care about the iphone soo
no way
iphone brainrot
The fold 7 was nice
folds are for stupid people

obsolete product at launch
tbh at this point I'd rather just a fingerprint scanner on the back or smth
half the time faceid requries your damn password to work anyways
we not going back to that 😭
you can unlock your phone with faceid, lock it then 2 minutes later you want to unlock it again its "your password is required to unlock faceid"
i just got the password check every few days
protip for any american, dont use faceid anyway, police are allowed to get into your phone with faceid and forcing your head to look into it, they arent allowed to get your pin without reason
I get it every so often it gets a bit annoying
it's intended to ask sometimes
yeah but its a bit too often for my liking 
lowkey good cuz i know people that forget their passwords on android 😭
also it would make more sense if it asked after you haven't used your phone like overnight or something
now it does it a few mins after you last unlocked it, like it had a sudden case of amnesia or something
I did a while back but didn't change much
maybe it dont like your look 😭
funny thing is it can still identify me with or without long hair or beard or sunglasses 
tbh I never even tried it, just too used using a code lol
can't you just close your eyes and it won't work
unless they forcibly pry your eyes open I guess
I prefer that
I mean they can accidentally step on your toe REALLY hard so you open your eyes or anything thats grey area enough

Or just shut off your iPhone before giving it to them, which forces the phone to ask for a password and it will be in BFU.
if it's in AFU you are cooked if you don't have lockdown mode enabled
Regardless of faceid or not
I mean you gotta have the time and opportunity to do so before they confiscate it
if I were american and attended protests and stuff I'd sure as shit not have faceid on
that assumes you have it in your hand and a chance to do that
Actually lockdown mode is your best bet
Lockdown mode makes it insanely hard to break into your phone when it's AFU
yeah if I'm in an ICE active area I'd not assuem they will let me grab my phone on the table when they storm around lol
Now sure lockdown mode is annoying to deal with when it's turned on but it's your best bet
Also setting your phone to wipe itself after 10 failed attempts is a good idea
luckily am not living under fascist rule, yet
Think it leaked in a Cellebrite presentation recently that the only phones they cannot break into are iPhones in lockdown mode and Pixels running GrapheneOS
Also if your phone has a number (a sim) then the government knows you were at a protest using simple IMSI catchers.
Stingrays yup
And they can exfiltrate data from your phone connecting to the dummy cell tower if it's not encrypted
that's why lockdown mode disables 2G and 3G
well thats more for stuff if they have some valid reason to go into your phone and find something, the issue with faceid is they could get in and use data in your phone to have a reason for more searches first
if they get a warrant to dig into the phone thats already a step further
though depending on which state you are in I suppose even thats a bit iffy atm
if they have a valid search warrant they will probably show it to apple and get your icloud data if you dont have the advanced encryption stuff enabled
even then thats not good enough, newer stingrays can take advantage of 4G, LTE, and 5G accross all bands
and it can trick the phones into negotiating to less secure and older protocols.
I was talking about encryption there
ok fair
Does the OOBE process for Windows 11 Pro allow you to make a local account or does Pro also require Microsoft accounts?
I have never installed Pro before... so I havent a clue
pre or post setup?
because after setup making a local account is hella easy
OOBE, so pre
no then
first time you boot it up
at least not an easy way
Okk, so GMKTek do use something like Rufus to make their Windows install cause all the videos ive seen of unboxing their computers, they always let you make a local account
I mean, I never set up win 11 pro that way
I do recall there being an option to make an offline account during setup for some people
but you need to go through the "set up for domain or job" path rather than the standard user path
and then you select the option for domain join
its meant for businesses or schools that allow you to sign in later using their own login portal or domain after setup
but you can leave it as a local account
Ahhh...
Ok
Interesting
Is that only on Pro?
Idk if I've seen that when installing home previously
Ahhh ok
Also
I still don't know what magic Valve did to make the Steam Deck bios work with controller though
That shit is sick
How do I install a Linux Distro that does not work with Secure Boot until after install when my PC also has a Windows SSD installed? Will I remove the Windows SSD, install the OS, Enable Secure Boot, set it up, then reinstall the Windows SSD?
I have always installed windows first, Linux after
Nice... unless the gen z brain is cooked with AI
Soon only cloud gaming will be possible unless you're rich 😅
the bubble is being propped up by enough copium and reality denial at this point you could blow up a thousand hindenburgs with it
as soon as the reality denial powder runs out its going to be a rough withdrawal for these people
yo smn knows if i can use a 4060 with a ryzen 9 9950x3d? i bought a new am5 pc but i cant aford a new grafic card for now
Yeah it will work, but what a mismatch of parts lmao, generally you want the best GPU u can buy and then you get CPU prio 2nd
yeh but i had and am4 pc and i needed to update to am5, i will buy a 5070 ti or 5080 on december
Here is the issue, you are going to have to hire new talent at some point, otherwise your current workforce will age out and the company will shrivel up.
yeah i know that the 7 is more afordabble but i wanted to have a very good gpu for a while
and my dad helped me with a bit with the money so
More cores for getting work done????
yeah doubted that xD
otherwise you'd have the money for a gpu too
9950x3d only for gaming?
yeah…
I mean, that's my justification for getting a 9950X3D, it's to get work done faster.
waste of money
ik
i mean i get it when you do productivity a 900 makes sense but besides that it does not
More or less yeah, most games don't take full advantage of all the cpu cores
9950 if you.need the extra cores.. 9800x3d if you game
yeah
same reason i went with a 5900x in favor of a 5800x3d
and run 9800x3d
its just 200$ diference
9950X3D is still good for games, it's just also a really good productivity cpu as well where certain applications benefit from the extra cpu cores
and the 4060 is dogwater xD
What was your cpu before?
ryzen 7 5700
if 200$ is nothing buy a good gpu
why did you upgrade from a 5700 to a 9950x3d
i dont say that
cuz my dad told me that he would help me with the money to buy a very good pc, so i can use it when i go to uni and that stuff
idk i just buy it
bough*
It's a good cpu
Whats stopping you from returning it?
yeah but when you have a 5700 to pair to a 4060 your already at a decent situation , with ram prices its just financialy not the best move
9950x3d with a 4060 will be awful though
you can play minecraft with max distan horizons but no shaders I guess
Wat
i mean it depends on what uni courses you do
i just play roblox and r6 so
A 4060 isn't the best, but it isn't bad
But money that went into cpu could have gone towards a better gpu
well what courses do you have? like cad and 3d design?
from experience cuz a friend has a 4060, you can do 1080p to 1440p at most
im gonna buy a 5080 in a few months
iirc 1440p was not above 60 fps with shadewrs
genuinely i do not get why bro needs a 5080 for R6 and roblox
CAD is very CPU heavy
he doesnt need this entire pc tbf
if its just for gaming
yeah thats why im asking if its related to that
And for 3D it requires a bit of both
More CPU for setting up scenes and modeling. more GPU when you go to render it
yeah, ik im wasting money, but im seeing for the future
im not buying another component for a while
as a student you want to have money in your bank account not in hardware you dont use at least thats what helps me
maybe his dad will fund his college
yeah he will
but then I would still go 9800x3d > good gpu
This tbh
u guys are thinking like the poors
i mean mine does aswell but still im burning through money at crazy levels
Ubuntu still ships with a 500MB EFI Partition 🤦♀️
Bruh, 1GB is minimum since like 6 years now
No wonder users keep having issues doing updates to drivers and shit
i remember trying to compile on ubuntu it was pain.
so, i bought a holy60 fake for my wooting but idk nothing about modding kb
how can i start or what i need to do
this article is such ragebait,
"oh no, my mouse doesnt work on Linux, it doesnt click, I cant move windows, I cant drag or click anything inside the window"
Using a Mad Catz RAT 7 mouse from like 19 years ago...the ONLY MOUSE to ever have that issue on Linux
if that was the only mouse I had that would suck though
even if you're in africa, there should at least be a cheapo garbo that works
yeh
little brother mouse
funny enough, I used to have this exact mouse back in the day
I also faced this issue, I looked it up and the FIRST RESULT was that this is a known issue with ONLY THIS MOUSE xxxddd
It also worked just fine out of the box on SolusOS, so thats the distro I choose to use at the time
now I have my g305 and its flawless on Linux 😍 especially cause I can configure it using Piper
im glad you misinformed right before posting a doc disproving what you said
?
I said that the article said the mouse doesnt work
and it doesnt work unless you make a udev rule but the article author never mentioned such solution and never mentioned its a known issue with the mouse
the ONLY MOUSE to ever have that issue on Linux
sure
thats why the link you sent clearly shows more mice
with the same issue
ok
the only mouse brand*
fixed it
i mean oh no i cant use my mad catz mouse from the stone age on linux its not that big of an issue in the first place is it?
not to mention the rat7 isnt even part of the article
it is mentioned in the arch wiki
yes and right below the mention it is a config for a completely different mouse
Gee, I wonder what mouse I see here?!
Could it be the RAT 7 by any chance??!! WOW IT IS!!!
the rat7 is 08xx or smth as the PID in USB
it's kinda ironic because you fall for ragebait all the time
like i said
did you even read
Identifier "Mouse Remap"
MatchProduct "Mad Catz Mad Catz M.M.O.7 Mouse|M.M.O.7"
MatchIsPointer "true"
MatchUSBID "0738:1713"
Driver "evdev"
Option "Buttons" "24"
Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 0 21 22 23 24"
Option "AutoReleaseButtons" "20"
Option "ZAxisMapping" "4 5 6 7"
# Option "Resolution" "3200"
# Option "ConstantDeceleration" "2"
EndSection```
this is the config that section mentions
both the product name and usb id are wrong
they dont match the rat7 or rat9 to my knowledge
here rat 7 its on the damn article I linked
direct link, here ya go
cant miss it
brother did you read the god damn config
i said it twice now
that config is not for either of the mentioned mice
same config as another mad catz mouse, they can share the same button mapping
whatever
imo whoever you tried to bash had a valid reason to be upset about it
as a new linux user you would trust such wiki article blindly and then realize it aint working

Strangest thing I’ve seen in this channel so far
Oh sweet summer child...
no no linux is perfect now haven't you seen all the "I'm transitioning to linux" videos and social media posts lately
Wonder how many of them switch back to Windows
Which they are less likely to broadcast
what exactly is the difference between them
probably most of them honestly 
between windows and linux? a lot of things
yeah, i know its a different OS and you can customise the fack out of it from a friend, but thats mainly it
its a completely different os kernel altogether, nothing is really directly cross compatible
every game or application developed for windows has to be ported in some way
my friend switches from windows to linux at will 
shes an it nerd so ig that makes sense
some things will never really work as well as on mac/windows regardless of your talents, others might work even better
im aware that games have different ratings based on if they are compatible etc
it just seems like ALOT to do
its quite far behind on things for creators for example, like pro audio or video
if you mostly do more basic stuff on your machine like browsing, chatting, playing music/video and play games, you can get by quite comfortably on linux if you're prepared to do a bit of rtfm
i can’t remember what she did, but i know she was doing some code stuff to customise like the homescreen or something with dot art etc?
gaming is great too if you dont need to play online ones with the incompatible anticheat
i do all my gaming on Linux...except fornite cause Epic said Linux is evil or some shit
it all kinda depends on your choice of distro, which is another nearly endless rabbithole with linux
you only need the main ones to pick from
Fedora, Bluefin, Mint / PopOS
Arch if you want more advanced distro
it looks cool, but i think my brain would implode
I couldn't use it on my main rig because I rely on too much old and niche hardware and software that's strictly mac/windows only
it takes maybe a week to get used to it then you sorted :D just like learning Windows the first time xd
like genuinely linux has its usages but most of the time its just not worth it for the average person
<3
yeah only if that person really, really hates both windows or mac for various reasons
like yeah windows is a sloppy pile of dog doodoo these days, but it still has a lot of compatibility that simply doesn't exist on linux
yeh ;-
most online games and a lot of business apps arent on here and dont work on WINE / proton
nor does my 36-channel pro audio interface, or most digital audio workstations
you also cant break it as easely imo trying to set up linux for a non tech savyy person is hell
doing professional level 3D work or video editing is kind of a pain as well
in my case i just dont want to deal with a lot of terminal inputs im not patient enough for that give me clickable buttons and im happy
Bluefin requires almost 0 maintenance
you only need to enroll the secure boot key when you first boot after installing it but that just makes you pick enroll then type the password you get on the website
then after that, software and app updates are automated and install during your next reboot / boot up
oh yeah good luck with autodesk software on linux
I didnt even notice when my install upgraded to version 43 of Fedora
Seamless <3
transferring games takes ages :'(
its not a good experience for creators in general
Davinci Resolve allegedly works realllyyy good if you have AMD GPUs
even the most capable applications are pretty amateur hour compared to the industry standards
not sure about adobe
I think you can run most of adobes stuff with some tinkering
but you might have various amounts of success with various plugins and other stuff
By the very basis of how they work is extremely extremely different
Completely different designs
hmm i wonder how adobes cloud stuff works on there, i mean i have the creative cloud from university but damn its a pain to use.
yes at their cores they have basically nothing in common
XD
i have the license but our own docent recommended the pirated copy for better performance cant make this up
Problem is there is no good alternative to Lightroom and photoshop apart from maybe Pixelmator
and most courses work with it
luckily I don't do much work that requires adobe stuff
Be thankful that you don't have to deal with Autodesk
I transferred Cyberpunk, where TF is it??? did it not work cause it was modded???
Lmaoooo
Yeah Linux has issues like that, when one single process breaks the whole kernel basically explodes
Monolithic kernel moment
Linux server give me all day everyday, perfection.
Desktop ...
Ball ache
Yeah idk what is going on with the desktop distros
Yeah no it ain't.
thats not that fast
Definitely not bad though
FINALLY
However steasm overlay wont work for games that run off a ntfs driver
I alt f4 my game and now I have no gui
Ubuntu lts ....
It's like a 4 years old base OS that ZorinOS uses
And you have really new hardware
the stuff in the video is the same on my arch install
Hmmm
I only use the overview to switch apps
Works even when the game is in full screen and I love it
Hit Super key and can access all the other open apps immediately
running ToddOS I see
Wut?
Xd
Yeh I ain't ever going back to Ubuntu or anything based on it
Especially based on LTS
ok for some reason when in full screen gasmes are bad
Bad?
Hmmm
you enabled console peasant mode by accident
its not even smooth 60fps
just like a console then
lol what
borderless mode fixes it
still not super smooth but i can just switch to windows
weird
CPU usage seems off
Hit everything with Experimental 
Works best for me 
i tried that firs
is this blury or just me
Looks normal to me 
Ok well it's not silky smooth but I can live with that
Maybe try setting cap to half or 2x refresh of display 
I set all my games to 140fps cap and they be working nice 
I did
Also zorin os shits itself when it goes to sleep
imagine if it was motion blur being enabled?
Linux operating systems notoriously handle sleep states really badly
I've had similar issues
Except Debian on arm for some reason
That somehow works just fine
I like motion blur
Zorin OS? 
Yeah, I bet my left hand it's one of "Ubuntu-specific bugs" 
I had arch last night but I just like zorin because it does everything for me that I want
Do you have Nvidia GPU?
Yes and I know what you're going to say
because the focus is in the wrong places
Also again Ubuntu works fine
Zorin is great, just with one huge issue - it's based on Ubuntu LTS
So you are missing out on a ton of fixes from new versions of drivers, as you only get critical fixes on LTS 
Very likely that stuttering is one of these
I fixed stuttering

I really really like zorin and to replicate how it feels and luck is so much hassle and effort on arch
Don't tell me it isn't because it is
I did it last night
Sure is 
Just that Ubuntu 25.10 for example would be better suited for desktop than LTS, because it'll get newer libraries and drivers with new* fixes and stuff
LTS is only for servers imo 
Problem is Wayland is smooth and xorg is bad




