#🔌│tech
1 messages · Page 283 of 1
THANK YOU. VALVE
ITS SO ANNOYING THAT THE DECK ALWAYS ASSUMED THE HEADPHONES YOU PLUG IN HAVE A MIC BUILT IN
Yeah? You used the mic on the deck?
fuck
maybe tesla is actually very smart
by using 301
theyll be totaled with the smallest incidents, so you dont have to repair them but you can sell another one!
but if I got one, paint that shit immediately
hahahha
tough and corrosion resistant
"Ultra-Hard 30X Cold-Rolled stainless-steel"
if its hard its not likely to be tough
it's not unlikely its actually 301 with a ribbon
and 301, cold hardened
becomes a bit magnetic xd
but very strong
It's relatively hard but therefore brittle
Damage to the exoskeleton will always be very expensive.
no they made some zones that do deform
its all about construction geometry and thickness ofc
but because its 1 part, an exoskeleton is hard to replace
therefore, must be repaired if you want to keep it
well
good luck
stainless steel exterior finish means you cant use body filler
301 degrades in quality when welded
welding causes the material to deform, so youd need some type of 'filler'
probably cannot punch dents out either if it is brittle
you can weld up a bit, and then make the surface flat again by like, sanding or grinding etc
but thats also more heat, fucking up the corrosion resistance even more (301 isnt great to start with)
AND
then you have to get to a similar looking finish as the rest of the car
which won't be easy at all.
maybe some people will get their cars wrapped
Remember that Rivian
small dent, 40k+ repair bill
that is wild
it got fixed for less by the known dent repair techniques
paintless repair even
but on a cybertruck, good luck
the rivian has the advantage of paint
so filler doesnt matter
once water gets underneath the wrap, itll accelerate rust
also, acids, also from acidic rain, cleaning products etc can all leave marks on the surface
even water
so have fun hosing down the car with demineralised water after every wash
and then coat it in oil or clean the whole thing with glassex until its spotless-ish again
on god if I had a cybertruck
I'd paint it the moment I received it
stainless steel, called rust-free steel in the Netherlands, is not rust free or resistant at all
301 is a pretty low quality for rust resistance too
it's below our regular turning grades
which would be 302
yeah i used think it could not too
Yeah so, it completely does haha
well the different gardes can mitigate rust
then a metal like aluminium forms its own layer but it can probably rust too right?
and at seaside applications sometimes it feels like 316L sometimes rusts even quicker than 304L, it's unexplainable
The stuff just rusts
The Cybertruck will be brown within a year or two
disassemble it and pickle it or something 😂
only steel rusts
other materials corrode
oh
well then copper turns green at the least'
yeah but that's corrosion
and that corrosion is called patina hahaha
Aluminium forms a small corrosion layer, which basically closes the material up for further exposure to the weather
steel also forms this layer but that layer isn't closed, and so it just continues to eat the material
But I don't think the Cybertruck is repairable, sustainable or anything tbh.
because of the extensive costs to repair exoskeleton damage, it'll likely be totaled easily, which just gives Tesla what they want
people won't repair their truck, they'll just scrap it and buy another
why give repair shops money when you can sell another car and make money yourself
My old company did some work for Tesla. 'Insufferable pieces of shit' was my favorite description I heard from one of the people on the project.
Yeah the issue with rust is that it flakes off so readily exposing more steel to further rust
Aluminium forms a protective layer instead which manufacturers might even treat to deepen the passivating layer. in fact aluminium's passivating layer can be dyed with different colours!
I was at the Chamber of Commerce Innovation Top 100 2023 event today
Let me tell you
People nowadays just want money and fame and just use sustainability and environmentally friendly solutions as a tool.
Most of them were talking about how big they were etc.
Almost noone told us they focused on producing quality.
Some companies violently played into consumerism.
I fucking hate it.
It's almost more of a business Top 100 than innovation
same goes for tesla
the fake ass wanna be seen as green but we just want money mentality
IRC this is known as green washing
we are using 20% less material in our packaging to save money to save the environment
Sure, your new product saves a bit more energy or whatever when in use
but you had to make an entire new product, of which the environmental cost isn't worth it at all because the old product does almost as well but was already produced.
So all the green people go on to buy that new greenest thing, the new model EV etc
fucking creating more waste as they go
basically
But yeah those companies had an "innovation" but
NET 0 carbon by 2030! (at which time we will move the target date up 10 years!)
the company that got 3rd were speaking like they were very big etc
so we asked, what if we want to order stuff for our factories
and they were like, we don't even have a test factory yet
sure it's innovation but the innovation in my opinion is when you get the test factory to work, so you deliver your proof of concept that you can scale the invention
gotta prevent those forests from being logged that were never going to be logged because of how inaccessible they are!
Noone cares about your lab chemicals and stuff if you can't upscale the process to make it
wha
oh yeah well
well because then you have to be directly responsible for the capture
and companies want to just spend money to have the problem go away
It's funny
Some companies do that, others just move away
For example
certain political parties in the Netherlands want to severely reduce farming etc
but in an unreasonable way
So basically farmers are being bought out, so they quit
then the produce becomes an import good
farming just moves to a different country, where it's usually done in an environmentally more unfriendly way + the transport costs
If you just talk with them, and understand each other
you can do so much more than just bullying them away
But the green parties want the Netherlands green
Not the world, only the Netherlands
Why do they buy out farmers btw? Because they want farm land to become house land
Several parties had it in their programme to make it easier to get building permits on agricultural land
Then comes the question, why that
because our policies surrounding helping foreign people suck and we don't really help then we allow them all to migrate + take some people with them
basically means we need a lot of housing. new cities etc. when the space available is decreasing
So the solution is to put a green flag on bullying farmers away
but yeah it's just a scummy practice
it's not beneficial for things that are actually green
so...the plan is to turn NL into one massive net zero city that imports absolutely everything
and has no real room to produce cultural goods?
to not be able to get actual Dutch Gouda would be a damn shame
if you leave it up to the green parties yeah
sickening :D
and a lot of the new generation people don't think things through
most
they fused 2 left parties because they wanted a higher chance in the elections
still lost
tbh, always room to form a coalition
I hear PVV needs as many friends in the houses as possible

i think maybe people are more smart and it's just the few left people that just bring all media attention to them
think? whats that? Most of them are walking like zombies, being drawn by their iPhone Screen
yea i guess
one of my colleagues spends at least 10 hours a day on tiktok alone...
as determined by her phone's screen use time
Holy fuck
yeah...
My own sister knows that I am awake over the night because of work, and instead of googling something within 5 seconds, she prefers to call me at 4am............................................
I don't know what is wrong with people our age
a lot
that's a very broad penstroke
and yet is so true
So they are getting dumber and dumber by using tech for the worst reasons possible and not as tool. People were in disbelief just because whenever I cannot get somewhere with any questions may come up I do research online for some minutes until I get to a good level and started calling me google. Guys I am not fucking einstein, I just care ffs!
Violet, nah
you're fine
you think every now and then
using that spongy tissue between your ears
:>
most...don't nowadays
most of my colleagues avoid books like the plague
and I'm A UNI STUDENT FFS
to learn that the vast majority haven't cracked open books to assigned readings until they're being tested on it
is outright disturbing
i read mine if i am missing a bit information ona unit
other times not really needed in my opinion
oft the text is separate from the subject of lecture, or needed to understand lecture, at least in my experience

might be different for different fields
i do not know mans unless someone needs a lot of book knowledge does not seem necesary
i used my book in C programming like once
A on the final exam
book knowledge...yeah
i will say i might look books later
cuz i buy them and can revisit topics to remember them
but paying attention in class and answering questions seems to be enough for me, physical notes to me seem like a lost cause most of the time too. I almost never look at them later
should one do the book assigned assignments yes
that is part of the grade
if people do not not surpised they failed
i had that one for a week
it theoretically should be on a plane to Kanukhistani territories within a few days
perhaps even today tbh
mine has been in a plane for 2 days now haha
...that's cursed
typically you want to unload a plane ASAP to speed up turnaround times
the updates are just kinda late
mine, assuming the tracking is right
should be somewhere in Sydney's international airport, waiting to be loaded
but i wouldn't expect yours to be on a plane this week tbh
it is early afternoon friday there, so
...ouch
a week
also wtf yours got shipped a hell of a lot quicker
guess domestic and US orders got priority
i think they put them on the back of snails for transport
im eu :/
damn
whats your ~ order number
forgot exact, but it was near 1800
so definitely close to last in the queue if that's how it was done
ah then yours was just given to postal services later
im like 1300
and optimum took like a week for all
would have thought he'd do em in batches based on where the orders were from tbh
that seems to be the norm from everyone else
domestic first, then major markets
auxilliary get things last
hm
truly tech of all time
You know what I just realized looking at the Gameboy, the speaker was covered by your palm, less an issue as a kid, but it does make me wonder

what's a security concern?
I’ve never been this excited for a mouse in years lol
And this ain’t even a complete mouse, it’s a damn shell xD
hopefully you dont have any issues with the right click pretravel but if you do just email him
i just got my replacement but my original one is super dialled in now after adding some ptfe spacers between the switch and standoff
That would be concerning considering he test fitted them all, no?
he would have had to let a lot of duds through to mention that
I will email if that’s the case though, thanks for the heads up
👍
you may already be kissing if namedrop triggers accidentally
Is the OLED Deck panel native portrait like the original?
I know there are two suppliers for the OLED panel, so maybe that depends on the Supplier?
I dunno, I could check out mine once I'm home
iirc it’s not
There's a little bit, but you have to look like a centimeter from screen at it
Simple anti-aliasing stuff, nothing special
I know one review talked about portrait orientation, maybe the GN one and they mentioned what the new one was, just not totally sure anymore
The OLED Deck seems native portrait, my friend's OLED is portrait and he has the Samsung panel
Oh yeah seems like both are portrait still can’t find the video I was thinking about
You can however use SK to HDR Retrofit though
why are they made in portrait? is it easier or cheaper?
I guess they are more commonly wanted in portrait to make tablets and phones with
Download Notion to improve your workflow:
https://ntn.so/howtomenqna
_______________________________________
(͡• ͜ʖ ͡•) | Exclusive Walls & Widgets | ٩(˘◡˘)۶
_______________________________________
▣ Patreon
https://www.patreon.com/howtomen
(Top Supporters: Andrew Brady, Derien, Harley,Jimi Penque, Steve Arellano, The Godfather, מונו הפרה)...
What?
"How to Men" 
^
Still, I don't get the channel name
They are men that show you how to do cool things on Android
its mostly the same guy tbh but yeah xd
Lazulite is so cool :O
o..the 2nd gen razer nomma speakers
never seen those in a video before
not sure this is right channel but uhh
setup time. I have few ideas on how to put my pc. One is with the glass panel facing me, on the desk. Other is with front fans facing me, on desk. Last is on riser, to right of desk, front fans pointing towards me. Which is best? My monitor is 27" and will be mounted dead center of my 1200mm x 600mm desk, mousepad is est 20" x 20", case is asus gt301
On the ground so it doesn’t waste deskspace
I'd recommend a riser for the tower. keeps it off the carpet. They're dirt cheap.
A significant amount of 4G phones rely on 3G networks to make calls. The shutdown of 3G networks around the world is set to disconnect those with 4G devices.
--------------------------------------Socials-------------------------------------
Website: https://www.hughjeffreys.com
Store: https://www.hughjeffreys.com/store
Instagram: http://instagra...
YES
FINALLY
Suites dropped the ridiculous idea of forcing us to use Bing 
This even includes the voice network too not just the data network
They could turn off just the data part
And still allow phone calls over it
My phone displays H+ when on a call
That means mine won't work .-. if this rollouts in Ireland
just put a fan on it
Letting the Nvidia card do the rendering with Frame Gen and passing the resulting output through AFMF on the AMD card that is connected to the display, the average fps in Cyberpunk can be boosted by 290%. However, in some games, the 1% lows show dramatic drops due to AFMF not working properly.
i love it lol
no lol
well its the same as using fsr3 frame gen
but its less broken
somehow
and ofc you get the benefit of it being dlss as a base which is vastly better
I mean slightly less garbage as a basis is still garbage
nah
yes, dlss fg is still garbage
but you cant use RR with FSR3
but rr isn't even part of this discussion lol
the + from using RR is cancelled out by the - of using FG is the point
so you end up back to zero
did they limit RR to only work with FG?
wheras with fsr3, the native upscaling is already a -, then you add on another - from FG, and finally another - from FMF
quin
read what im typing
I am but unless RR is tied to FG I dont get how it matters here
the reason I call it garbage is I think dlss fg is still nowhere close enough to be useable
so doing dlss+afmf or fsr3+afmf is bothg giving you garbage
with me so far here??
sure
so we both agree that dlss3 fg and fsr3 fgdegrade the image roughly a similar amount right?
yes
but we also agree that RR is superior to non fg fsr3, and that the two are mutually exclusive right?
RR is something for raytracing games only in the first place and not superior to fsr as they are not the same feature
ok but if you enable fsr3 you cant get RR
and if you can get RR, your visual fidelity is higher than it would be with FSR3
right?
that was why I asked if they locked RR to FG because in theory you can combine those
they arent locked together
but if the goal is maximum fps, then you would enable fg
and RR has little to no downside
doesnt change any sort of interpolation still make the end result garbage
if you are okay with bad results for more fps sure that works
more web :O
Honestly I love this
that is a company that literally just copied the entire legal notice from another company
unedited

happens
yea it's just amazing how sus most newer mouse companies are
obviously no fcc registration
why would they
let them be silly
being non-compliant is not just being silly
and can fuck over a lot of retailers/importers
(who also haven't done their job)
😜
Not originally meant to be a VR controller, just hey we now have a motion controller for PC
Although yes probably most known use for it is VR
yea, but it was the first 6 degree controller for gaming
I never did bother getting the Portal 2 thing for it, maybe it's still available..
And I wonder if TF2 still has native support for it
but yea imo something isnt VR if you dont have 6dof interaction
so the dev kits werent actually VR, just 3d Hmds
anyone good with ram problems?
I have one of these, not made by razer btw were just branded and sold as such. Fun toy at the time.
the black isnt but the colors still pop even at brighter environement
yeah black isnt the only thing
yes and no
but yeah coating matters for that a decent amount but I think this semi glossy they put onto the alienware is the best for most usecases
Sadly ive come to realization full glossy isnt best yeah. Semi glossy where it at
gonna grab 2nd gen qd-oled
whenever they come within 2024
ces will show and probably give dates for most screens coming
uhhuh really already? will be 360hz and thats enough for me for now
damn tn got no contrast
neither does ips or va kek 😄
with qdoled the actual brightness of the individual colors is vastly greater than on a rgbw oled, but you still are having to fight the ambient light
and with an lcd, you also have the advantage of the polarization layers absorbing more light, and finally, there arent any oleds that can push 1k nits full screen, so for office work, you have to divide these numbers for oleds by up to 10
- 500 is not that bright really, much more is recommended...
No
There was 6dof before that
read the whole message fam
Yes
For gaming
Spaceorb
It's the precursor for 3d mice Logitech makes to this day
For 3d modeling/cad work
But it was a true 6dof gaming controller
Worked well for decent
so on this graph, if you are reading documents, qdoled gen 1 drops below tn at around 100 nits (dim house light)
gen 2 drops below tn at around 150 nits (normal home lighting)
the matte woleds drop below tn at 250 nits which is normal business lighting,
only the TV stays above lcd perf till 500 (recommended office brightness)
and if you have a window that is being indirectly lit (2 bounces) you are still looking at 2k+ lux
That and decent support vr
So you could 100% play vr in the mid 90s with a 6dof controller, and a head tracked 3d hmd
interesting
i guess i never saw it because it couldnt be used as a 6dof controller for vr as you had to use both hands for it
it would only be useful for taking a 3dof headset and making it 6dof
actually if you modded it to usb, you could use it for vr by plugging it into the headset
anyways point is oled is still for dark rooms only
and this isnt including local dimming on the lcds, and using a garbage tier va
You hold one side static in your hand, the ball has all 6dof
yea but you are tethered to the pc
so you have to sacrifice 2 of the dof for player movement
at least
the razer has an extra joystick to give you back the lost dof
There wasn't standing vr it was all seated
again just faking vr
it aint vr if you dont have 6dof hmd + another 6dof from your inputs somehow
it would just be a 3d hmd if you have less than that
It is a 6dof headset and a 6dof controller
it wasnt yet
Yes it was
not unless there was a headset that supported serial input
because otherwise you couldnt move?
if you were stuck in one location, you lose a minimum of 1 degree of freedom, usually 2
The headset has a cable and you can move?
Why can't you move with a controller cable
you could it just limited your freedom
All vr has limits
not that small
and the point is moot since headsets of the time were 3dof sometimes 4 not 6
I had a track ir 2 and 3
i imagine that trackir would be compatible with 3dvision?
3d vision never worked well enough with enough games that I used it
Also arms 2 has roll and y, but they are tied to the lean and zoom
yep, but using tridefvr, you could use 3dvision supported games on any hmd (for the most part)
add trackir for your 6dof visual experience, and one of these controllers for your 6dof input and you have yourself actual vr
If vision 3d worked lol
shh
also afaik tridefvr tended to work better than native, but i never tried native
I have both gen if glasses and the quadro real genlock sync one
And I still never used it that much
And tbo trackir was like 90% arma 2
i didnt use tridef much because my pc at the time couldnt handle it at all
i suspect it still cant
this could be a good use for dual gpus tho lel
1 gpu for the game, the other for the vr headset
Lol
and you are looking through windows anyways
I dont know if this belongs in this channel, but I havent found any help yet:
Is there a vertical mounting bracket for the EK-Quantum Kinetic TBE 200 D5? I found the EK-UNI Pump Bracket (120mm FAN) Vertical, but its not on the supported list, even though they seem to have the same mounting system
I'm so stoked, had to share it with yall. My custom Steelcase Leap v2 chair came in to round out the wootstation lol
bro got a cover for the wooting!!!
i switched from AMD to Nvidia and cant play any Vulkan games. They either say I need a Vulkan GPU or crash or make a blue screen of death. Ive used amd cleanup utility, uninstalled and reinstalled drivers, disabled AMD Switchup for an APU which i dont even have...
Other games run fine...
Does anyone have any idea what the problem might be?
Oh also i checked the ram with memtest and checked the S.M.A.R.T with Cruicials own Software. nothing found.
did you use DDU for a clean driver install?
I uninstalled with amds software and ran cleanup utility
make a clean install with DDU
how do you guys normally clean your pc case and parts safely
compressed air
download from guru3d save?
yes
Open up PC after unplugging everything and turning off power supply, use datavac or compressed air, don't spin fans with air.
Use isopropyl if necessary to get caked on dust
Not really much to it, just don't spin the fans and you'll be fine. Take your time and be thorough
Or unplug the fans from motherboard beforehand
Basically if you spin the fans you're turning them into little generators, which can send some charge to mobo and fry it
Can also unplug fans, just be sure to plug them back in before you put the side panels back on
How does Google not have their own Chromebook?
They literally invented that entire category
Eh, Microsoft didn't make computers for a while despite making Windows
Google seems to only really do mobile arm hardware
what would google get from making their own chromebooks
Lol
imagine making pixels but with even less profit margin
the entire Surface line?
didn't make computers for a while
past tense
Surface is a fairly recent development in comparison to the entirety of Microsoft as a software company
The Surface got an update just this year
yes the point is about before the surface line.. not what they currently do
new tablet and laptop range
Google's made 3 different laptops including a Surface style hybrid
Intel chips & decent ram options but no dedicated graphics.
The very first surface was in 2017 damn
I had one for work.
Intel iGPU does decent job for productivity stuff
The Surface Books were better.
The biggest issue with the Books tho was that they were heavy as shit with that hinge.
Surface RT was released in 2012 if you want to consider that one
ya lol i have cats
i cba to always have the door closed so
gotta do what I can
Holy hell, Tegra 3 + 2GB DDR3 
I have the last proper Pixelbook and I was going to install Linux but to fully delete ChromeOS is a pain in the ass.
Talking about iris? or hd graphics?
HD since Skylake, so 5xx?
Because hd graphics sucks for anything that even is a little bit graphic intensive, iris is actually pretty good for most things
Depends on the type of graphic intensity
Ok I ran ddu with amd as the target and portal suddenly worked. Detroit on the other hand didn’t come with its „yh I can’t find a Vulkan ready gpu“ to „…“ pure silence.
My idea is to now run ddu over NVIDIA and then reinstalling it.
Do I have to uninstall NVIDIA first and then run ddu or first uninstall it and then run dddu?
3d? Definetly
I'd say 2d in photoshop
But Intel from 7th Gen and onwards is solidly better to have than any igpu from Radeon for video and photo
You can install it on top of prevoius one, it should reconfigure on the fly
worth a shot, windows reset could also work maybe
Ok, first go to Windows and click uninstall or simply run ddu over it?
use ddu, by reset I mean do the reset of windows itself
yes dont touch them from there if you dont know what to do
ay is wooting working for u guys?
?
if you got any issue thats the post for it
okay. DDU saved a lot, except for 1
before portal would simply crash instantly after loading screen. now seems to work perfectly fine
Detroit says it cant find a Vulkan 1.1 ready GPU. Nothing has changed. on my old 5600xt it worked fine.
Didnt test Metro Exodus before. now it works fine.
Feels like DDU was 100% necessary, detroit seems to be messy af being the only game that doesnt get it rn...
im so confused
yeah just installing a different vendors drivers easily messes things up
could try factory reset of windows
Start > Settings > System > Recovery iirc
essentailly wipe everything and start fresh
Thing is so many others having problems with the game on NVIDIA. And since ddu everything seems to be fine on my end, too...
plans are friend will wipe a drive and well do a clean install just to test the game on that.
bhijklsrdfrgksiaderbhnfw
anyways ty very much ❤️
yea
wish people could test the intel hedt tho
cheaper, faster IO, and monolithic options
hows the deltahub?
id be interested in that keyboard cover ngl
can you link it?
yeah i got you
its great, helps a lot since i have a rough weave speed pad
doesnt chafe my wrist
ah, I personally have a glass pad but ive been thinking about getting one for a few years now
It's slower in hedt applications though
Only in a few adobe apps is it faster
Also we've seen 7200 kits for wrx90 which is higher than C741
Dont get glass
Eats your mouse feet, develops slow spots
Glass pads don't get slow spots
Unless your gross and never clean it
Now you do go through mouse feet quite a bit faster but I still get well over a month out of mine
Cloth pads get slow spots, glass pads just get dirty
xraypad obsidians last a little longer
I want jades
Haven't used this combo in a while
looking forward to either the LGG Neptune Pro or Mercury V2 Pro
with Jades
I am speed
I'm using sapphire skates + control pad rn
Trying siege out so I figured I'd use my artisan zero again
is that suppose to achieve now inital friction but high dynamic?
Tac fps + control pad kinda just work together well... Who would've thought
Static and kinetic are essentially the dame
So the force needed to start moving and continue moving is essentially the exact same
Makes a very smooth experience
what mouse are you using?
any admins around here
i need help
what's the best gaming headphones i can buy(dont need a mic)
depends how much money you have
hd800s or a dt1990 probably would be the best options in terms of the "best"
which won't help you get better anyways
k371 is not that good I'll be honest
I own one personally and I never liked it
it's built cheaply, needs a good seal to actually get any bass extension
it's not particularly resolving
k371 is likely to perform better in game than those simply due to being closed and to a minor extent sound isolating
they dont make a closed dt1990 do they?
closed backs have issues with soundstage/positioning, which should be the entire point of a "gaming" headphone
soundstage is awful for gaming
the k371 isn't particularly good at either of those
all you need is imaging
well its pleasant to have but its not better performing
+1 on the 7506, it's objectively better than the k371
I've listened to one in person too
and directly compared it to the k371, since I had both of them on me when I listened to it
ik it wont help me get better i jus want good sound quality and clarity for games and general use
then I'd get something that's good for music, not just for gaming
and also state a price
if you have a budget, that would help a lot
oh my sennheiser isnt making the he1 any more?
wow
i mean preferably around or bellow 200 but i can doe 350 if i wanted
probably going to make a new one
should be interesting
is that usd?
yea
how noisy is your surroundings?
not like the mdr7506 offers that much isolation for outside noise anyways
are you in the US?
nice!
lucky you
uk
personally would recommend the hd560s, overall good well balanced headphone
OK TY
you could also get a hifiman sundara, if you want something a bit higher end
ive been kinda disappointed that in the 2 years since they released, noone has done anything better
yea it remains the goto recommendation for under 200 for those not in the US
what if you are in the us?
6xx if you're in the US and if you're ordering it on a sale
Not a fan of ole mate senny eh
it's basically the same as all the other 6x0s
yes
when the pads are too new they are too hard
and when the pads wear in the driver protection touches your ear
and the pads wear super quick
that's just the downside of sennheisers velour pads, nothing specific to the 6x0 line
500 series doesnt touch your ears when they wear
dekoni probably sells a pad for the 6x0 that trys to replicate the original signature
probably should get these once my pair of pads get worn down
well that's more the issue of the lan rather than the headphone
anything other than a ety would struggle in a loud scenario
many many iems are very good for a bit of isolation
it really depends on your personal fit
if you dont pick the correct tips, thats on you
that's not even just the tips, it comes down to volume and what music you're playing too
when it comes to obfuscating sounds iems are better than headphones, but you're still not going to get complete cancellation without any audio playing
isolation is purely related to the iem and the tip design
which is why i say that instead of obfuscation
and even just a 10 db drop will help alot
vs the 1-3 at best of the very open backs
stuff like voices and certain high frequencies easily get through iems
even er2's aren't able to fully cancel out voices
depends on the tips
the grey foams ive found im completely deaf
they really hurt however
I've used iems daily for multiple years in a loud highschool experimenting with different tips and different methods of creating a seal
this is completely different from what you probably are used to using them in
yea and theres no chance you were able to wear the grey foams for more than a few minutes without pain lol
that is regardless of your surroundings
I used to use the grey ety foams for hours lol
once you let them sit and dont' mess around with them they are quite comfy
ok now you are pulling my leg
no literally, I have wax proof
do you have giant ear canals that just barely fit them or something?
they seal far better than the silicone tips
they also sit in the ideal spot of the ear canal for me
the silicone tips were really easy to break the seal on, no matter how far I inserted them
both the double and tripple flange
did you go over the ear?
I've used every tip size the er2 came with except the double flange silicone
were you able to get the yellows into your ear at all???
over the ear has the disadvantage that you're able to insert further, which allowed me to break the seal of the silicone tips easier
I only used over ear with the foams since the seal wouldn't break
probably, idk
I use the small spinfit size on normal iems
so the entrance is small, but it opens up ig
normal iems fit in a different part of the ear than the etys tho...
and it is normal that theres a bit of a region just inside your ear larger than the entrance to the canal
but etys go far in beyond that
which is why I used it as a example of how my canals may be wider deeper in the canal rather than the entrance
I reach about this far, about to the start of the bump
if you want I can take a video of how I insert the etys
im good
never answered this tho
I'm still young, I'd rather not get ciems yet
i have the moulding compound to make the customs on my desk right now
and its been there for over a year
whats the best headphones that would have decent bass?
yellows? as it the large tripple flange?
no the mondo sized foams
mine didn't come with them, so I don't have them to test
is ARCTIS NOVA PRO WIRELESS FOR PC worth it
no
do you want quality bass, or quantity of bass?
what evepr gives more emersion in single players but isnt tooo much in shooters
just get a hifiman sundara
Ihttps://www.ebay.com/itm/155636746868
5 year warranty included
the 5 year warranty is what really sells it
It is very loud, but I mean, stick it in a NAS
Fudge it, bought one, that's my last HDD slot, but running down to only a few hundred GB, so it can get dicey
That seems like a hoax
DPMAregister is the official publication platform of the DPMA, used by the office to issue all publications, prescribed by law within the scope of pending procedures regarding patents, utility models, trade marks and designs.
Technically a robotic arm patent so I guess it is stretching it a bit too much
Yes of course but could be used as scarra kinematics
The article definitely did try to put their version of what it should be into the context of that
The R36S is a budget handheld that packs some impressive quality for its $40 price point. Plus it rests on the shoulders of other RK3326 devices, making it good for either plug-and-play gaming or testing out a variety of custom firmware possibilities.
Buy one here (try another link if they are sold out):
https://s.click.aliexpress.com/e/_DFnNf...
since linux people dont socialize they wouldnt know to pose something as a question or not
they just question everything
sudo cmd ? everything
Did Samsung make a leather back for this phone or is this modded??!!
cause it looks badly dinged up with scratches now
Exact one
It does
Look at the gaps in the flash
Also the lenses are usually thicker or idk the word
Usually have more depth
ooohhh
anyone know any discord server to discouss audie devices?( mainly headphones and iems for gaming and casual use)?
You could talk about those here, there is some overlap between the audiophile and keyboard community.
Please try and keep posts on topic, @rich sand
That's cool XD
the idea is nice but that product is quite silly
if you need the extra slot from the gpu lines but you only use a 4060ti? seems like the build likely has some issues
Maybe could work for someone egpuing a 4090 on the go
no because if you egpu it the pcie slot is not used
and if its egpu and no pcie slot used you still cant use it because the 4090 uses x16 lanes
Sorry I mean laptop with egpu enclosure
Some could undo from the 4060ti which they have for some reason
Oh so no egpu box exists for it?
no egpu doesnt split the pcie lanes as it needs so you couldnt do that
thats neither a egpu nor a laptop
🎅 Get exclusive GuardIO deal here ➵ https://guard.io/scambaiter The first 1,000 people to use my link will get 46% off and a 7-day free trial!
If you want to support my work, consider becoming a Patron: https://patreon.com/scambaiter
One-time donations: https://paypal.me/scambaiteryt
Twitter: https://twitter.com/scambaiteryt
Discord: https://di...
indian scammers going to jail thanks to youtuber 😄
and a week later they will be out or so again
A shame
last time he hit the newspapers. and they actually have a claim against them. hoping for the best
Made some upgrades on my pc with many problems, most of which seemed to be resolved. However, I just ran a 3h memtest…
If there were 0 errors, fine
If there were 10 at the same bit, fine, bad cell
If there were 10 all over the place, fine, cpu can’t handle the frequency
…
But 1 single cell 1 single time at 1 single bit at 1 of those 4 runs…
I don’t know what to do now XDD
What would u do?
ignore it, remove the OC
Its not really oc. Ram is officially 3600 c18. I have a 3600x. So it’s no oc on the ram itself, only maybe cpu or mb not being able to handle it.
above 3200 is OC technically
:c
Ok. When I buy a new cpu in summer or so I’ll see if it comes back
Ty very much @ashen spindle ❤️
also did it crash or do some error or why did you do memtest?
Everything was fine for a week. On Tuesday Destiny got an update and would instantly crash. File scan showed errors and fixing them made epic crash.
Also had bluescreens of death etc.
Took out new ram, put in old and install worked. Put new one in on 3000 and everything still worked. Turned back to 3600 and still fine. Memtest had 1 run with 0 errors so the ssd was the next suspect. Crucials software found nothing in SMART that would hint at that. Then found out Vulkan had problems so drivers were the next suspect.
Reinstalled, worked again.
Tried many forms of reinstalls until using ddu to wipe amd, then NVIDIA and then reinstalling NVIDIA. Every Vulkan Game worked except Detroit…
Then I started Destiny and it crashed within minutes 2 times. Scanned files, fixed files without any problems, played for 3 hours.
Left the dungeon, game crashed, was tired af
Started memtest, found out on Twitter Destiny has a bug where leaving the dungeon can cause crashes, woohoo, problem found, looked at my memtest screen, 1 error.
So in a total of 4 hours memtest it had 1 error…
oh thats fun
Yh…
Also gpu has a shit ton of coil wining and is allergic to undervolting
Ducking autocorrect
ok this is new.... a console that has telemetry
that was ENABLED by default. I just turned it off
and a ToS xd
Turning the 3600 c18 into a 3200 c16 should be fine, right? In real time it 1:1 the same
Except for lower frequency
yeah probably
Ok now I’m wondering. Does this mean the ram can’t go much beyond 3200 anyways rn ?
idk what that screen means
sry was eating
memtests integrated speed test. did both read and write. on 1 and 2 byte size steps we had only 1600mb/second meaning effetively only 3200 mhz in raw performance i think
might be set to that or memtest only does jedec speeds so at 3200max, not sure
in the stability test it ran on 3600 and i doubt that memtest would limit to 3200 in a speed test in an era where we have 6000+
hmmm
probably zen2 just limiting in general, 3200 and 3600 have little to no difference in speed tests i found in the internetanyways
Why is it when I am on high graphics for a bit my pc just goes ham
wtf are long graphics
hes on ddr4 though
My bad I edited it
that still doesnt mean anything
Going to take a wild guess and say fan rpm ramps up but no idea really
Friend just received his RMA for steam deck le
Has 10 dead pixels
Haptics don't work on one side
Wild

hey can someone help with my wooting
it started blinking and slowly turning off the rgb and every time i unplug it and then it just turned off and it wont turn on
can someone plzz help meee
scammers getting desperate with spam
let me see
commeumity
:')
does anyone know a way to permanently disable youtube subtitles
is not letting me trouble shoot
is the same thing
but i will do it again
its stays like that
not on :[
ok
Oh
Yup, I got them after I stopped using thunderbolt tho so I haven't maxed em out yet
got any idea y is not turning on
yes
Cable ones don't work that well, you want the adapters since they are 9nly wires, no chips
I hate the adapters because the cable end is so big/long
BOE panels are pretty good, not sure what happened here. 😛
Hoping my RMA comes in fine
I might tyr one more time, but after that I'll refund yeah
If it ends up being bad
🤷 price of convenience
I get the flat 90 degree ones or the straight ones
Mine were borderline for pushing 4k60
ok but when iplug it in how long u want me to hold the two keys cause i wont be able to see cuase the keyboard rgb is off
Adapter with high quality cable usually works alot better
ok
Ok
how can i see the wooting in device manager
cause i dont see it
it didnt work :[
The fact that Google rewards credit expires is absolute bullshit.
tried that
I've only got enough credit in rewards to pay for 3 months of my Google one 
I've been using Google one for free for over a year via rewards credit lol
I am sending a video so you can see what my keyboard doing
@reef patrol i did but no one look at it :]
Not relevant.
It is excessively rude to intrude into someone else's thread with completely unrelated questions and replies.
sorr i am pretty new here and i didnt knew how to make one
but i made one
@reef patrol can u helping mre ewith my keyboard
the video should show what the problem
or u want me to explain it
@prisma crag do u got any idea
oh
i did
and it didnt work
i hold it the two keys then plug it in
yes
ok i am going to watch th e vid
so i plug it in and hold the two keys then let go the two keys then i click the reset device and it goes though the things and it stays on waiting for device to be connected
and yes i did plug it out and in
while is on waiting on device
i am doing something wrong or my keyboard is broken :[
I don't see leds on the wooting itself turn on in the video
it looks more like leds in the room lighting on the wooting
mean
https://www.reddit.com/r/SteamDeck/comments/12ojkj0/steam_deck_wifi_tips/ Seems Deck may not like DFS channel
Hey does anyone know if the new coiled cable wooting sells have enough voltage to keep tachon mode on? I remember not being able to use my other coiled cables cause of this problem but I'm guessing these fix it?
I would hope Wootings official cables would support their feature sets.
that is the point of them
It's literally on the product page.

aight shit just triple checking, and I didn't see 😭
in wootility, set the color to black or brightness to 0%
thanks man
https://www.reddit.com/r/SteamDeck/comments/189njjq/you_deserve_an_oled/ Companies don't even need to advertise
wooting is kind of the same, so fitting
dont think the speed is any faster but go off I guess xd
maybe 3fps more than LCD in some games
If you're getting 27-28FPS, it can make all the difference
😛
But I think mainly it's the 50% battery life, incredible display, runs quiter and cooler by a big degree and is lighter
the only time my deck gets hot is when playing Switch games....
Switch emulation is heavy on battery life too
Man, I cant wait to get a bigger Deck, you can really notice the 0.4 inches of extra size!
Deck size matters
hi guys can you recomend a good futureproof PSU in budget for 7800x3d, Asus TUF GAMING B650M-PLUS, rx6800 from asus to be upgraded for new amd GPU that will come in future or 4080.
750w or so is fine, get something from a good brand like seasonic in that range
https://www.cybenetics.com/index.php?option=power-supplies has a good table of good ones
🤤 the LE looks so so so good
sorry i kinda went so sleep
but it didnt work :[
A Seasonic PSU or the latest Be quiet Dark Power 13 PSU
i think i will buy MSI MPG A850G PCIe5.0 850W 80 Plus Gold ATX 3.0
its cheapest and very good reviews
get one, you seem to really want it
pay the scalper fee 
OLED inky blacks 🤤
@wheat plume I was considering asking my friend to get one and bring it over
When they visit XD
oo
yeah do you know any burgers?
yes
but none of them are visiting Ireland anytime soon 😢
OwO
Is this the new "Super Scary Sideways Screen" message replacement? xd
LOL
where it belongs
ah we are back to unfounded windows hate
that windows hate will become real once windows 12 releases
There are reasons to hate windows
But Linux doubles down on about half of why windows sucks
So…doesn’t mean much from a Linux user
https://github.com/PCSX2/pcsx2/pull/10179
If you want to suffer, there's the I_WANT_A_BROKEN_WAYLAND_UI environment variable lol
haven't heard of it prior to now. emulation drama is terrible
brain out it is
"playables" sounds apt for this tripe
O.o TIL Gnome Foundation got a 1 million dollar donation....DAMMNNNN
Next million to KDE please
some alcohol and cocaine might do them good for all I know
Nah, thats what they use to come up with stupid decisions to remove transparency on the terminal cause "it causes lag on old machines"
Certainly didnt cause lag issues on my old dual core AMD Athlon laptop with 2GB ram
even XFCE terminal has transparency....and thats a desktop meant to run on super potato hardware
Hey can someone help me with my wooting it won’t turn on I tried to do the steps in the video and it still the same thing
If anyone has the chance can someone help me plz
??? they are so full of shit lol. but I like the desktop, so maybe their tyranny isn't totally unfounded
Please stop spamming channels asking for help. You made a thread in the support channel. Now be patient and wait for help - And maybe help others help you by including more information about what specifically isn't working and where (screenshots help)
Ok I mean this in the nicest way possible but I know u guys got people to help but everytime I see someone post a thread they get the chance while I am on wait
It's a community, not a paid tech support hotline.
Ok but y I am being skip to be help tho
Maybe you're not providing enough information for someone to know how to help?
I mean this in the most respectable as possible I do send pictures and what is happening on the keyboard
I say every info I got
But I am sorry for being a pain in the ass but I just want you guys to help me
its also sunday 10pm, not prime time for people to be working
check again
ooh nvm
im not reading well today
Post it in your support thread. Much more likely to receive help there. 🙂
You got hacked by Hackerman®
what does enabling XMP in my motherboard bios do? i know it boosts fps but does it overclock anything?
XMP stands for eXtreme (causes Xs are cool) Memory Profile
It clocks the RAM up to specification the manufacturer set, otherwise it runs at baseline jedec specs
i dont atleast 😭
ty
dunno where to start, the most ive ever done was i think enable TMP 2.0
thanks!
the guy's building a 3 cpu system wtf?
yea im not a fan of linus' energy, only channel i watch from lmg sometimes is mac adress
completely different type of videos over there
ayo it released xd
https://youtu.be/XL7mR1JIT3U
Hello, my friends! Let's hit 20K likes? Check out my website! https://enderman.ch
Today I am going to install Windows 11 to the Recycle Bin. Essentially, I'll just send that operating system to where it truly belongs. Recycle Bin being just a hidden directory in the filesystem makes it absolutely possible to install Windows to it!
Still got que...
They never did.
They just assumed because they knew how to fix a dodgy scart cable connection.

ayooo, Windows 10 small taskbar on 11
The what now?
WIndows 10 taskbar has the option to use smaller icons that made the taskbar a lot thinner
11 removed that and made it even thicker
windows 11
That's broken on the new updates
learn this one simple trick called hiding the hotbar to ignore however it looks like, corporations hate it!
I'd go insane having it pop up constantly if I momentarily pass the area 😄
Would you actually move the mouse there though that often
no one would
I don't think I've had a taskbar per se in years to begin with teehee
Meanwhile I don't really mind the Windows 11 task bar
Is will say, I question how I had my task bar at the top for years.
When I go to my laptop I ask myself what was I thinking.
taskbar on top is actually good
i never use icons or start menu though
just use search for everything to open
and alt/windows tab to swap
I prefer bottom taskbar, I use the start menu and search to open apps mostly
I don't use desktop icons
kinda would be my ideal desktop
still designing it, so those empty boxes are just there as placeholders
nice
kek, forgot this was a thing
So android? XD
Because that's what it screams of
it's closer to macos tho
what is the name of this wallpaper?
in terms of layout and design
Thank you
Ayo
ZorinOS finally got Gnome 45
Their first gnome 40 release
DESKTOP CUBE 😍😍💜💜
I wish gnome workspace previews were larger in the Overview
They are teeny tiny ...
I use the Just Perfection extension to make them larger
Way way way too small
The vertical workspaces in Gnome 3 were way better than this
Especially for dual screen
Well it’s gnome after all 😁
I still have no idea why TF a project called GNOME has a FOOT as their icon
Oh yeah
I forgot ZorinOS is made in Ireland
This is unsettling...
Yeah....
What year are we in? 2010? (or when ever compiz was the shit)
I loved compiz 🥺🥺💜





