@KyleBennett @NVIDIAGeForce @Radeon The Radeon RX 6000 series and upcoming RDNA 3 GPUs will not use this power connector.
#๐โtech
1 messages ยท Page 54 of 1
But it's the future!
Aren't their CPU and GPU packaged in SOC fashion?
And they are using some sort of bridge/interposer to lower latency between dies within the SOC package.
And then there's AMD having to settle for the design they had because they are trying to keep the design simple and scalable
I seen some comments on youtube saying that electricians whom are using this kind of cable rates them at most 300W
no
m1 ultra uses 2 chips
each chip contains cpu and gpu
and the chips are connected with an interconnect that is even faster than the internal interconnect on pascal
but its just not fast enough
2.7TB/s is sloooooow
a100 is 10+TB/s
H100 is unimaginably fast
Eventually in near/far future interconnects will be replaced by some sort of photonic(light) connection
you mean in throughput?
Interesting, because I believe lightspeed is way faster than electrons could travel through wires
Maybe because of the emitter and receiver delay?
yep but electrons arent what carry data in copper lel
what actually carries the data is the electric field itself which propagates at the speed of light
speed of things is also different depending on what it is in, vaccum or not etc.
yap
light is faster than copper in a vacuum
but speed of light in copper is higher than in glass
You mean EM wave in copper?
Vs light in glass?
I wish I had this kind of course in detail regarding computing down to semiconductors.
i think fiber may replace pcie
but it will not be used on classical computers internally
cxl 4 or whatever may be a fiber standard
They did mention they can carry more data
a single fiber can carry more data, but it requires complex circuitry and even more complicated lasers
circuitry both optical and electrical
I wish photonic computing do come out, but there are newer technologies using current materials and hardware coming up.
i already own a silicon photonics device
and i paid a total of like $40 for 6? of them
First thing I searched for is this small thing at 1.3K SGD
I paid like 15 for these 2, then I got 4 more for $20
those are second gen
first gen 100gbps ones are cheap as chips
I see
You using them for research?
heres 5 for 40
nah to connect my pc to my server
Oh fibre optic connections
thanks to intel pumping these out like they are going out of style, its cheaper to get extremely expensive 100g adapters and these hyper cheap tranceivers than to get 40gb adapters (which are super cheap) and 40gb tranceivers (hella expensive)
i originally bought these and 40g nics, but they arent compatible, and it was cheaper to get the 100g nics than 40g optics (or even dacs)
I see. But how much does this kind of setup set you back in cost
$40 for tranceivers + cable
$200 for the nics
if you want a switch thats $700-10k
but I just direct attach
and the nics cost $200 for a pair if you wait, but $200 each if you are impatient
i paid around $400 total, but the parts I needed actually cost more like $250
I am planning to buy a switch next tho
the new melanox quad 100g switch is a beaut
Seems like decent cost to get set up for high bandwidth transfer
thing to be aware of tho is i am bottlenecked by pcie
Gen 3?
gen 4 lel
i only have gen 4x4 unless i want to take away gpu lanes
server side its 3.0x16
which is good enough for 1 link
I thought there is 1x16 lanes exclusive for GPU
or it can be 2x8
Oh if you used the 2nd slot
Maybe threadripper or HEDT can solve your issue?
Well you get more multiprocessing against larger data transfers etc.
but i actually dont care about that
i just want offboard storage that is native perf
As long as you can transfer what you want in reasonable timeframe I guess
you dont get it
the idea is no storage besides boot on pc
everything stays on the server and is live mounted on my pc
basically pretend its an m.2 nvme with a very long cable so the m2 is in the basement or so
YEP lel
That's a very weird setup, but you have way larger storage than running on nvme
tbh not significantly
i only have about 20tb of ssds
and there are plenty of 32tb nvmes
also means your pc can be anywhere or you can have multiple pcs access the same without having to swap out drives
yaaaap
True.
also budget backup, if the pc dies from AiO leak the data wont be touched etc.
Well at least I have not reached that stage where I really need that setup.
the idea is more so that I can back up the data i want while the pc is off, and the server can be in another room or the attic
you insult me,
I would never use an aio
fine, your custom loop that you made so bad it leaks then ๐
๐ I am running on water loop
you got it ๐ ๐ ๐ถ๏ธ
Well it's a hobby, getting more performance but requires more maintainence
oh I know, but if its not an AiO a leak cant be blamed on that, thats on you then
i have done zero maintanance on my loop which is one of the most maintainable loops ever made
i have zero fittings, only quick disconnects
you mean rotary and angled fittings?
no
Using quick disconnects instead of standard compression fittings?
I bought a 40g infiniband switch but I couldn't use it cause even after noctuafying it was too loud
Aren't those mini noctua fans loud?
it was $40 for two dual port 40g adapter
they are sufficiently quiet, but in the housing they scream
Limit the rpm?
if lower speeds are enough noctua has some cables that limit max speed for their fans iirc
uhhh really? think I had a free one in the nhd15 lmao
Can confirm. I have a handful of those adaptors from unused NHD15s
yea they give them for free with the coolers
the bigger problem tho is the switch is infiniband so its not practical to use
doesnt support the 100g adapters either
Well I assume your switch don't output pwm to control fan rpms, or even if they do the cables are just resistive cables that limit the voltage the fan receives
Getting closer, here's the nekkid 3090 kp
So 100% pwm at lower voltage will slow down your fan
Watercooling or ln2?
rip kp edition
water
KOOLANCE
thats the name of the qdcs i used
You used them with koolance coolant?
I running the same setup lol. Ram though is not Bdie
thats 128gb right there
not bdie sadly
Damn lierally every single connection is qdcs
Rip flow rate.
Oh wait, techN block not affected much by water flow rate actually
you can run them at 0.5gpm and they still perform.
im also running dual radiator lel
dual pump?
I see you have quadro or octo there
quadro ye
I wanted to buy one, but shipping price sucks
So I made my poor man's version of quadro with Arctic fan hub and arduino with stripboard shield
yea i need this otherwise the deltas destroy my ears
i also have temp sensors on the input and output of each radiator
fan speeds controlled by water temp
I control my fan speed based on the delta of temp sensors at intake and exhuast of radiator
air temp?
I used to have 2 nf-a14 ippc 3000s that can rip my ears if they go past 1500rpm
Supposed to get water temp sensor and a air temp sensors
But since my motherboard came with 2 free air sensors I just use it
in the time it takes the quadro to wake up, the deltas spin up to 3k rpm
3k out of 5600
Oh those 30mm phanteks fan
Well they work and don't worry about the fire hazard *ahem
yea if they run at full speed, those power cables will melt
*for more than a few minutes
Oh I believe the cables that are part of the fan will also melt
nah
Unless they are 12AWG๐ฌ
i am using both power wires, and the cables are each rated for 5a
these are server pulls
Well 60W can cut many things.
When I have more space and finance I would like to add more the my waterloop and try out something I have been thinking of.
if i want to expand the loop i can just buy more qdcs and swap the part out ez pz
I can imagine your pump thanking you for more suffering๐
tbh it seems relatively happy
im considering getting one of those smart pressure pump rad combos
Higher power and auto control?
There is one by singularity that has additional air pump to prevent water coming out from potential leaks
That could provide additional layer of "safety" for leaks
you sure you arent thinking of the aquacomputer leakshield?
i def cant afford that lel
and im relatively confident that would be worse raw cooling perf than what I have now
it really sucks that you can never find info on prices for the B2B deals
like why, what are you losing if you say it wont start below 10k or 5k or 40k if thats where it starts
Oh that, my brain in sleeping mode since it's past midnight
Sapphire Rapids plattform transition:
Ramp of Sapphire Rapids and Emerald Rapids will be executed in parallel. They use the same platform, so customers will benefit from that. Intels sees a big enough windows between Sapphire Rapids and Emerald Rapids.
sooo
SPR is so delayed it ramps at the same time as the successor? 
yeowch
meanwhile 96core server chips from amd launch event on nov 10 lel
yeah sure, good luck using it if you are sitting around because your hardware is not there 
sure
but broadwell e + a quick assist pcie card is faster than milanx in these workloads
Does anyone know what was the big thing VR is missing that makes VR feel more real
I cant remember the tech
how long a list do you want lmao
It had something to do with like, if you're inclining/tilting ur head it doesnt follow your head movement
lmao what
huh
Or maybe my mind is playing tricks
Uhhhhhh
current headsets are fixed focus
It may have bee that, varifocal...
I was looking into buying VR headset but it was the thing I was waiting for, but I forgot what it was
annoying af
wait for deckard
this
it will be out soonโข
or just get pico4
what abt meta quest 3
meh meta
ok it was varifocal lens with 90% probability, ty
quest 3 comes next year so not before deckard anyway, most likely
whats cool about deckard
valve premium hardware that they always wanted to do but was not possible/wayyy to expensive for the index
sure but most of that is something they can integrate/improve upon now
anways im most hype about the dual cpu nature of it
ayyy
also at this rate there is even a chance it's going to be phoenix point instead of van gogh
meh
whatever as long as i can swap the main rendering chip to be my pc instead of the headset itself
I really hope it has some support for lighthouses tho
dont particularly care how it supports them, but as long as it does somehow
90% chance for that
might be inside out only :/
nah there have been code strings about it
but might be optional
inside out only would be a compromise that wouldn't really get them anything
not even that, I think they know how much vrchat users like more tracking options lol
with the option to go standalone it would make sense to simply offer both
for the price I do hope they support that
what will get announced first, 4090ti or deckard lel
depends on how good 7900xt is
tru tru
and how fast nvidia can make a 24pin connector that doesnt burn
id be really shocked considering a rumor for a higher sku 7000 popped up right after 4090 launch
ehh havent seen anything like that
idk we had some places say they call it XTX for a year now, then others saying its just how they call the chip internally or so
also that 420W is not something any other source even hinted at
so I doubt it
i just want a 7990 dual gcd card
What on earth
yes you can sand it, it's most likely more about the surface being flatter not the thickness
It does seem to confirm that AMD has errored in its design of the IHS
seems like quite the jump in conclusion
yea amd made a tradeoff and it didnt pay off
well, maybe the tradeoff is v cache being better and they use a lower IHS there instead
big inhale copium
RTX 4090 shall not die until morale improves
Today we are taking a look at the Moondrop Dash. The two worlds of keyboards and audio collide to bring you a Hifi Keyboard. Honestly, this board took me by surprise, and I was quite impressed.
Edited by Bachoo:
b@choo.to
My Socials:
TikTok: https://www.tiktok.com/@shoobstube
Twitter: https://twitter.com/notshoobs
Twitch: https://www.twitch....
That's... kinda sick
https://www.nvidia.com/en-us/geforce/forums/geforce-graphics-cards/5/502996/rtx-4090-driver-crashing-constantly-without-any-lo/
Always funny how nvidias official forums always have the issues still...
299$ for a 75% keyboard, even if it has "high end dac and amp", sounds like a massive asking price
but integration
look at the price of the moonriver 2 by itself it's not a bad price
its a 190$ dacamp
Just cause you get the keeb for like 110$ doesn't make it a good bundle purchase 
Also I imagine Moonriver is not that great of a purchase
its a good dacamp, it measures well for iem and high sensitivity headphones
You lose any and all portability though
At this point why not get something better
what you gain is convenience, most iem cables are short to where it's annoying to run them to a desktop amp right beside the monitor
I really don't understand this product I'll be honest
And it doesn't seem to appeal to most people
sure it's not for most people
its for people who use iems at their desk
and want a more convinient audio output without having to run a extension
I guess I don't really understand the IEM struggles as a headphone user
But hey your own fault for picking the inferior product 
Noise isolation?
What is that?
I blast my songs on open backs all day without having to worry about that 
have fun being deaf eventually 
you say "blasting" I assume loud
30% still seems alot for iems
it depends on what gain setting vexx is on
Also traditional pots with iem is starting to become yikes
Unless super low gain
IEMagni exists for a reason
I mean my point still stands, not everyone wants to run a extension for their amp
iems all have quite short cables
Tf is this turing machine
Resistor ladder stepped attenuator
Actually now that I messed with my very unpleasant volume knob on the Heresy
My volume is on like 20%
And it's really damn loud
Although I did decibel testing, it seems to be below the 70db limit
IEMs generally don't have fixed cables.
Just just get longer ones.
isnt mac lovely
and there is NO TRIAL
I also dont like running cables over the desk so yea
Is that first party?
yep
yeh ;-;
not everyone likes using long cables either because they can get caught on chair arms and get in the way, I always loop my cables to make them shorter
windows RDP is made purely for same network connection though
Nah
then you're sacrificing quality
So do you just beam audio into your brain,m
You are making no sense
I remember braiding my fixed cable on my M30x
just run the cable through your sleeve and to your neck
Terminal Services Gateway.
If you remote into your PC from somewhere else, does your computer need to be unlocked? like is what you are doinf show up on the screen in your house too?
Depends on how fancy your windows license is
huh?
Different windows versions have different support for rdp
If you have pro or enterprise rdp you can have 1 local and 1 remote user at the same time
With server and rdp credits you can have many users on one machine
do you mean stuff like teamviewer is limited?
I don't think anything other than rdp dose multi session
They just blank the monitor
no, but say I dont live alone, and I wanna remote to my computer, would I have to leave my computer at home totally unlocked and not in sleep mode so I can remote into it?
No
Almost all remote software can unlock the computer
And most of them will blank the monitor as an option and block local input
RDP can do multi session
So while your remote desktop and someone could use the local machine
And the two users would not know what was happening unless they checked task manager
o
That's why task manager has a sessions tab
Which is silly on home because you can only ever have one session
Well I guess if two users were logged in and one was just locked it would be two sessions but only one active
Officially pro only allows one session too
Only server versions officially allow multiple sessions
FUCKIG HELL
FINALLY
IMAGE AND VIDEO THUMBNAILS IN THE GNOME DESKTOP FILE SELECTOR DIALOG
GOSH FUCKING DAMN
THERES BEEN SO MANY TIMES IVE WANTED TO SHARE AN IMAGE AND TRYING TO FIND IT BY NAME AND ONLY A TEENY TINY SMALL ICON IS NOT GOOD
thats like what
20 years late?
YEP
lol imagine 400$ more to lose to renoir
oooof
well thunderbolt
Yeah, CPU and one port difference
well those two are identical
ax201 just means its attached to the chipset on intel
dont know stuff about BT so could be
ax201 and 200 are the exact same logically
what's the cpu wattage limit on the new one?
ax201 is just cheaper because it uses the built in mac of the chipset
irrelevant because its intel
but its somewhere between 15 and 65 lel
For 18 long years the GNOME file picker hasn't had a thumbnail view but finally that is coming to an end, finally it has caught up to every other file picker from over a decade ago. This has gone on for so long it is treated as a long running meme
==========Support The Channel==========
โบ $100 Linode Credit: https://brodierobertson.xyz/linode
โบ...
shame no 6800u surface laptop
10 core 12 thread cpu lel
its an actual embarassment that it loses to an 8 core 16 thread
amd got burned by microsoft so thats why no current gen cpu made for surface, and this is the result lmfao
what's the story on that?
current sale price of sl4
officially from microsoft
believe it was van gogh that was primarily designed with MS for a surface line and that got canned so they had to look for another buyer of the models
got any sauce on that?
only stuff through the grapevines but it's been a while ago now
I think at some point someone found some investor stuff where allocations got made/cancelled and it matched up between MS and amd's numbers on it but idk if I can find that
gotta remember microsoft has alot of stuff made by amd
amds biggest current revenue source is them i believe
between console and azure
yeah but its also big departments, console deal doesnt really get affected by doing a surface deal or not
sure
the google says van gogh was made then presented
and that 1 person showed interest
obviously being valve
ah I think komachi was who posted some MS listings that had the van gogh IDs in a spec sheet
interesting
private account and I dont follow so cant really search past posts
and its been a while
youll be not surprised to hear that same
but even if thats all true, it could still be that valve ended up paying more, or the surface team allocated other things idk
but that's how it seemed and it would fit, but we'll never know
amd is happy to sell to multiple people lel
generally
look at the subor z+ and the xbox one motherboards
oh yeah, but if you want a specific design thats not already designed it will take them time/people that are limited, and that might not happen instantly the generation after you basically got lucky that the product works for another customer
sure
tl;dr dont get stuck on having to use a cpu that is almost only e-waste cores 
saw that name the other day and I like it
i wish intel had actually shot for the moon with the core counts of e cores
2p16e surface would probably be an extremely smooth machine
surface pro i mean
would be funny to see
die shot would look nice
curious if there would be any issues like ring clock or so that would come from it, could make for a good hot chips talk if it did
idk, that's why I'm curious if there was anything or if they just didnt try to make that
what a surprise
The 192-bit membus on the 3060 already seems small, why make it even smaller and then bottleneck the 6X memory?
They went with the fastest memory, but with the shittiest membus
and they dont want to repeat 970 lawsuit
give it better memory, make memory a bit worse to keep the product stack and keep margins
I dont like g6x but apparently its BOM goodness
the equivalent memory bus size to match bandwidth between g6 192b and g6x is 137b bus
so its actually not far off
and if they use the faster 23gbps g6x its actually faster (125b bus needed to match 192b)
I feel like when I type really fast there is a delay from my wooting lekker 2 to my laptop that is quite noticable. Is there a reason for this? and is it possible to fix?
thank you guys for the help, feel free to ping me!
Is your laptop lagging? I mean if the cpu is fully loaded with stuff.
You could try opening thread in uspport center.
Finally
I don't have the delta fan
Guess im just meta sensitive
https://www.youtube.com/watch?v=yU4CFhtS95Q
It's kind of funny to see Linus gobsmack at Seasonic PSUs not breaking a sweat 100W over spec and without the fan spinning ๐
Use link https://wealthfront.com/LTT to open a Wealthfront Cash Account and start saving today. Thanks Wealthfront!
SmartDeploy: Claim your FREE IT software (worth $580!) at https://lmg.gg/SDOct
Nvidia's RTX 4090 is the new king of GPUs. It laughs at last generation ray tracing performance, it shrugs off the most demanding of games, it... reco...
well, that can be bad
if your protections dont pack and you go out of spec that's not great
unless its like a 950w unit sold as 850w
It was a Seasonic Platinum. I think it's overspecced.
could be
I am wondering will there be something like
Maglev hall effect switches
Which uses magnetic levitation rather than springs
there already is
sadly sensor is inside the switch
I don't remember what CXL is, is this the sequel to PCIe or something?
"CXL spec is an open industry standard that provides a cache coherent interconnect between CPUs and accelerators, like GPUs, smart I/O devices, DPUs, and various flavors of DDR4/DDR5 and persistent memories."
Isn't this the open standard that AMD, Intel, Nvidia, etc are working on? To succeed PCIe?
why is this even a video? you open discover, type discord and press install
yeah, fair enough I guess
if someone knows that Discover is basically the equivalent of the play store, then that would help
can somebody explain why 3d secure is still this shit of a system that doesnโt support touch id/face id authentication?
is this the right syntax / structure?
anyone got advice on how I can use this shit
I'm kinda ass with coding and someone recommended I use it
how would we know?
if id design it id make an array of objects and then give them a question property, an answers property and the property of what the right answer is
ur syntax is correct it just doesnt make sense
it tells u how to use it
and it only points out styling issues
I know I m just dumb
yes my code tends to look like ass
unreadable some might say
id personally recommend pylint and vscode
pylint being a plugin for vscode
also got any examples of scripts cause code styling is smth subjective
especially if we talk tab vs space
and how many spaces
so you say to lay it out like
testQuestions = [
{
"question": "What is the meaning of life?",
"correctAnswer": 42,
"incorrectAnswers": [
34,
53,
98
]
}
]
well I'm very much a beginner but I know my shit isn't supposed to look like this
yes @wheat plume
ok
that way each array entry is a question
ye ye
you could even make it have the peroperties text, correct answer and answers
that way if you look over it youd access questions[i].text
looks more semantically good
but thats pure subjective choice
you just need to use more empty lines between functions and blocks of code in functions
from what i can see it looks like a mess mainly cause theres 0 visual seperation
o how
o
# Program make a simple calculator
# This function adds two numbers
def add(x, y):
return x + y
# This function subtracts two numbers
def subtract(x, y):
return x - y
# This function multiplies two numbers
def multiply(x, y):
return x * y
# This function divides two numbers
def divide(x, y):
return x / y
print("Select operation.")
print("1.Add")
print("2.Subtract")
print("3.Multiply")
print("4.Divide")
while True:
# take input from the user
choice = input("Enter choice(1/2/3/4): ")
# check if choice is one of the four options
if choice in ('1', '2', '3', '4'):
num1 = float(input("Enter first number: "))
num2 = float(input("Enter second number: "))
if choice == '1':
print(num1, "+", num2, "=", add(num1, num2))
elif choice == '2':
print(num1, "-", num2, "=", subtract(num1, num2))
elif choice == '3':
print(num1, "*", num2, "=", multiply(num1, num2))
elif choice == '4':
print(num1, "/", num2, "=", divide(num1, num2))
# check if user wants another calculation
# break the while loop if answer is no
next_calculation = input("Let's do next calculation? (yes/no): ")
if next_calculation == "no":
break
else:
print("Invalid Input")
as you can see in this example code i copied from the web
it uses empty lines to seperate chunks of code
and some small comments even
but ya pylint and vscode would prob be a good start cause you can setup your own styling rules
like empty lines at the end of files and what not
What language is this
Java?
looks like python to me
Have mercy on your soul then
should I use vscode or pycharm my advisor said pycharm is good
When I had the Python course, which I ultimately skipped out on, we were using pycharm
Jetbrains stuff is pretty good
python course is mandatory and isn't a python course
they just use python to illustrate computer related mathematics
pycharm should come with its own linter
Here Python course was a genuine programming course
Which I wanted nothing to do with
So instead wrote a 10 page paper on how AI works
I genuinely dislike programming for some reason, talk about 4 years of uni wasted
@stark bobcat
so u can also use pyharm
enable its linter
and done
itll tell u about stupid styling choices u made
I'm also in this weird ass conundrum when it comes to C#
Got a task that requires to use an array variable in a class as part of its attributes
And I'm supposed to somehow code it that you can add and remove attributes at will from it
Which perplexes me as to why are we using arrays and not lists
because you can do that with arrays just as well?
lists are fancy arrays that trade a bit of performance for more features
If I need to pop one right on top of the array, it's not that simple without something as complicated as linq
Also, not resizeable
the array itself not, you need to make a bigger one then correct
you just gotta manually access stuff with the index instead of having functions do that for you
basically using an array means you need to do multiplication by hand before they give you a calculator to use
๐ค this saying you CAN put a guide dog in the fucking trunk???
Where's the trunk?
All I see here are feeding the dog, stuffing the dog into a vacuum bot, the front of something or going on runs
there are so many spelling errors
If I have an array with the size of, let's say, 20, and it's initialized as = { };, do all of the null spaces also count as "0" if I do a foreach (var VARIABLE in COLLECTION) or are they completely omitted as null
Some languages treat 0 and null differently
depends on if its an array of a nullable datatype or not
It is not nullable
then its not null
๐ค
this cant be the right answer???
is it law or is it cause it looks nice?
xd
Wtf are you even doing, lanaposting?
Nah, I need to restore questions from a website into a local file
I'd stop after seeing bs like that
the website I cannot figure out where TF its getting the questions from .-.
it works offline, it works when all the cache has been cleared, it works when in a folder of its own
have you used the debugger to step through the lines to see when the values for the question get changed?
no, skill issue ;-;
@stark bobcat this is how id structure it for readability
also you do some weird changing variables around which reads a tiny bit clunky. i put 2 comments into the convert_to_standard function that show a tiny bit better solution for a quick switch as it just uses self reference
oh and in one func you called convert_to_standard without storing the return value or using it so its an unecessary call to the func
unless pythong passes refs and not copies
I will probably get the same task again this semester and will keep this in mind
I also think the way I solved it was very suboptimal
more brute force than anything
well time to do another practise task
why?
Also SK hynix will launch new DDR5 used 1b process ( 10nm class 5th gen) 1b is using EUV actively
And preparing new product roadmap - LPDDR5X, HBM3A, LPDDR6
HBM3A?
cuz last time I did this course I stopped like 1/4th of the way through cuz I am ass at coding
I attribute that to my lack of practising
only ever doing the homework and nothing aditionally
but I am changing that rn
Ayy what's up friendo
Except I'm ass at coding and not planning to do anything additionally ๐ฆ
I'm gonna do this task rn even tho it's prolly not that hard but I saw it and thought it looked like fun
Check prices on Amazon below
G Pro Superlight: https://geni.us/AwwAX
Razer Viper V2 Pro: https://geni.us/57uE
Razer Viper Mini: https://geni.us/ehszYk
DPI deviation is something that I've known about for a while but have yet to actually test. Turns out it's worse than I thought..
Video gear
Camera: https://geni.us/5YfMuy
Primary Lens: https://...
well its like everything else in life. you can only get better if you keep at it and have an interest for it. just keeping at smth you dont like will hinder you already
tbh I didn't mind the coding that much the thing that put me off was myself as I always did the assignments one day before they were due
So MM710 is just utter shit I guess 
and then I would run into issues and get very frustrated because of the timecrunch
An people said dpi on one mouse was the same as the other, I knew I wasn't crazy when I went from a Viper Ultimate to a Superlight, just felt a tad bit slower even tho the Superlight was heavier
ngl dont cram its bad for learning
take your time so you can research proper solutions and understand what you did wrong
or how you can improve
hey look, more issues on a finalmouse
who could've guessed they are not doing well in areas you dont instantly see
yeah but at least that is still having one extreme, the low weight which might negate that for the most part
Not really noticeable with the M2K
IF IT IS BLACK
@dense escarp I guess if you only use 1 mouse yea
I switched from superlight to M2K and after like a two weeks adjustment period my aim got noticeable better since the mouse fits my grip better
it doesnt really mean it's bad, just that if you expect a certain dpi to switch from/to it ends up being off
I guess that 2 weeks also included getting used to the deviation
Exactly
But yeah that's the only mouse I use
People always rag on the Superlight and Logitech, but the more test vids that people put out like this proves the hard work Logi put in behind the scenes that people seem to forget
All these other so called "new kings" are terrible
Should be a fun time in r/mousereview today 
meh I'd say razer mice good idek if dpi deviation is such a big issue
+-20 deviations don't really make the mice terrible though
in the end you get used to your edpi anyway
If it's something like that coolermaster mouse had yeah it's a problem
@stark bobcat yes but that edpi can change depending on what mouse you play on and then move too
But you get used to it if you don't switch mice like your socks lol
well I personally like to stick to one mouse if I can
Which is silly anyway
I just have a Viper Ulty and a Superlight, I am not those 20 mice guys, just find it funny how much flak Logi gets but they keep coming out ontop with test like this
That is really my point, some of these companies are forgetting the basics trying to chase a cool bullet point for marketing
Isn't the most hate they get rn from the lack of innovation anyways
Yes but I feel that is the reason they are slow to innovate, they get the basics done right first
I haven't heard of anyone slamming the company because of them releasing bad mice
Everybody else is skipping that to get the lightweight, or shell made of metal etc
Just that they haven't released anything amazing since superlight and other, even newer companies are going far ahead already
Yea but those newer companies are lacking in every other department is my point
You have simple things like deviation happening
are you not getting that
or constant issues about scrollwheels...
EXACTLY
I am but imo small deviation doesn't mean the mice are shit quality
nobody really said that
I guess I understood this message the wrong way then ๐ค
I did not mean they were shit, just meant they can't be king..
They are a false king
Superlight still seems like king imo
Fair enough
Only thing people can knock it for is the Micro USB 
its less them being shit and more so that they often skip parts that are well done by the established brands
like QC for scrollwheel etc.
it would simply be nice if they new things dont come at the cost of less QC/consistency
Quin always does a better job than I do at explaining 
i mean tbh imo micro usb is truly terrible
it needs to die
Did you guys see the new glorious model O pro or whatever
@stark bobcat it doesn't bother me tho, I have a magnetic tip in it, when I go to sleep I just move it near the wire and snap, its charging
@dense escarp That shit is terrible, the QC issues, I have seen like 10 different post abouit it
when you constantly need to translate what bs partner companies want from you you get used to clarifying things very fast 
Yea whoever bought the Model O Pro got scammed
Big time
Isn't pulsar X2 also riddled with QC issues even though they have no DPI deviation
I wonder if putting corepadz on my RVU compensates for the slightly higher DPI
I wish he would have put the og RVU on that list, it was just the mini and Pro from what I saw
yeah
They both differ from each other, so I wonder what the Ultimate is really like
feel way more people still have a RVU
Glad I never sold mine after my Superlight broke
Still waiting on my replacement, over a month later 
the superlight he tested were brand new right?
Don't know, man has so many mice its like every one of them is new
I wonder how DA V3 would look like in that list
if it is stock then man Logitech really dialed in the sensor height
but if it is his custom one, then idk
@dense escarp I really hate ergo, but I also really want to try that mouse
but people put different skates on the superlight anyway 
It looked like he had aftermarket skates on the White Superlight, they didn't have that grey color to them, atleast on my monitor
hopefully they were all stock, or else his results are pretty misleading
That is very truth
It probably feels really good with the 4k dongle
Most of the people in my Discord did not even know they could replace the skates 
They were so confused when I was hyped my new skates came in
It took off so little next time I will just checkout without one
It was like 60 cents 

Wonder if the LA-1 is actually going to make the Q4 release date ๐ค
Fresh has a sample
Cracking into some size comparisons of the LA-1. Lethal is killing it between the pads and mice.
My Twitter: https://twitter.com/freshreviewsyt
My Twitch: https://www.twitch.tv/freshreviews
CODE fresh for savings of up to 5-20%:
lethalgaminggear.com
agileshop.co
padsmith.com
odinpc.com
pmm.gg
puretrak.com
tjexclusives.com
locus.gg
rogueenergy...
I really want to try those LGG pads also, god I need to stop 
They sell something?
Yes? Licenses on all Windows based PCs.
Yeah I might get the venus pro once my locus pad wears down
Looks like sales are down on all fronts for microsoft
Tbf I wouldn't buy win 11 even at gunpoint
wow one of the top 10 highest revenue companies in the world does alot ๐ฑ
They mostly remind me of Valve 
Sitting on their ass all day cause they got a good product first
thats not microsoft generally lel
microsoft works hard to make products
but they are slooooooooow
and not particularly effective
Well Azure is growing, so maybe the cloud can offset the loss in other sectors for them
i really wouldnt worry too much about the survival of the 3rd highest revenue company in the world
Yea they aren't going anywhere anytime soon, not when they are throwing money around to purchase studios just to fight the good fight with Sony
Wonder if the Acti/Blizzard deal will be allowed to go through
Imagine linux starts to outdo windows market share and starts selling their own hardware
Linux to no. 1 2030
lighs?
I wonder if linux will ever die off though
It seems too rooted in as a server part
But for consumers?
I dont think whatever quiz you are looking at is using relevant questions and its just some data to not be empty
Lighs are what you get from GMO chicken
consumers will never interact with linux
things like chromeos and android are how things are going to go.
where linux is basically used as a heavy hypervisor
i do not expect devices more openly linux than the steam deck to break into mainstream
the questions are relevant for sure
the random wrong answers, maybe not
Yooo what's going on with 5800X3D prices
350 euros now
It was 450 like, a month ago
Something's up, they are down to 370โฌ locally too and that NEVER happens
last gen chips getting cheaper when faster options appear?
๐ฑ
Not that much faster
fastest to not fastest is a biiiiiiiig difference
Hyype
steam deck with no wrist pain here we go
I'm waiting to see how lenovo's version review, but it's either the nreal or lenovo for new
the lenovo ones dont come with prescription adapters (which i dont need, but I may pass the glasses off to my dad when i get the deckard)
oh nvm
Yeah, the lenovo in general seems like a slight downgrade from the nreal
I want to know about it when you get it. I've been looking into them for a while. How do you get the prescription lenses on? Bring them to a glasses dealer and have custom lenses made for it?
But if it's cheaper, it's all that i need
yep
lenovo is only 60hz, but I'm fine with that
person online said $100 for poly lenses
nreal said the air was 60hz too, but it is 90
might be the same sitch
I've seen a lot of reviewers say 90hz
๐คท not nreal
what's this star trek shit
basically a TV experience on glasses
Oh it's not nreal?
it is nreal
nreal is the one you can buy now
discussing nreal vs lenovo
lenovo is 2023
theres also rokkid
Oh you linked something else. Not the original post
I'm on my phone and walking so I didn't look at what you replied to
the amazon listing
shows that apple inspired spec brief
nyways its a holiday gift for myself
im planning on using it as a screen for steam deck use, and secondarily for legally using my drone (laws state line of sight required)
I also realized it would make an excellent evf for my camera
(cameras)
tmw typescript makes u write some super ugly ass code
await (this[subcmd as keyof GuardurlCommand] as Function)(interaction);
because just making functions in a class accessible by string is too complicated
await this[subcmd](interaction);
@fair gull how can I search this JSON array in JS to generate an array of all the answers?
?
it has this structure
I copied this into my HTML file as a JS var
if personally do smth like
for (const question of testQuestions) {
console.log(question.correctAnswer);
}
that should log all questions to the console
and if you wanna make a new array of all answers
let allAnswers = [];
for (const question of testQuestions) {
allAnswers.push(question.correctAnswer);
}
oo, thanks :D
I have the code in place for getting score, I just need to give it an array of the right answers
now the hard part, making the website show the questions in the array
if you wanna show em just print em as a join
updated the repl
have fun with that
do I need some dependency for this?
require() needs node js?
oh that ya but you said you pasted ur json into html/js
which is the only way in webjs really
i just did that so the code doesnt look all cluttered
for webjs yes
ofc you can put all js into a seperate js file
and then include that instead of dumping everything into a single html file
not sure how to use seperate js files in wix
im writing all the code locally, then copy pasting it all into the wix editor page
its just another file
but instead of html its a js one
apparently wix does it automatically
settings -> custom code
just add one there
and paste all the js into it
that then gets put as its own head
altho i cant test it since i will not make a wix account just for that
so no guarantees
AMD RDNA3 GPUs now have official Vulkan 1.3 support Vulkan support for Radeon 7000 series arrives before the official introduction.ย The Vulkan 1.3 specification released in January this year is now widely supported by AMD, NVIDIA, and Intel GPUs. The recently launched GeForce RTX 4090 GPU supports the newest 1.3.3.1 implementation, and it appea...
It's coming soon
Just a week to wait
Leaks will also prolly come a few days early
Ahh fuck off
I hate this shit when this happens
Now I need to remember how to make it go away
\ doesn't seem to work
It seems a possible fix for name conflicts is to just add an @ to the beginning of the variable
it is possible for those situations, like if you get someones database and they name it that exact way and you need to convert it
but there is no reason to call a variable the same as a keyword for your own code really
that's why most guidelines would make you call it m_Base or so instead of just "base"
coding guidelines, how you name stuff
obviously
makes it so much easier to read other peoples or your own code after you dont remember what you wrote
and prevents naming issues like that
and visual studio or other editors with a plugin can enforce/fix that with a hotkey if you forget it or so
I kinda just write whatever looks nice really
well yeah if nobody uses it and you dont plan to use it or get into the habit, no need
but even if you work on your stuff alone it helps you if it gets any bigger than a single file
Wtf is this
How am I supposed to make this into code?
This isn't SQL, this is C#
I understand the classes basics, like inheritance, polymorphism, interfaces, etc
I have never heard of relations between multiple rows of classes
Especially with relations like one to one or one to many
This sounds like an SQL thing to do
I mean if its a shop you could have a SQL database that has stuff
but in itself that just shows infos about classes/interfaces and their relation
your shop has products, the customer makes an order which includes some products
so both of them have products
I understand how UML works, I've worked with them before
I have absolutely zero clue how to transpose this into code
I haven't 
Like this doesn't look possible with C# 
yes it does
I am getting heavy SELECT FROM * vibes
what part does not look possible
All of the relations?
which one
Well it's a good thing too, you'll love LINQ then if you like SQL
Also another issue being the interface extending methods "getTitle" to class product which has no variable "Title" even existing
What am I supposed to return, 0?
I'll avoid linq like the plague
I really don't like code that isn't straightforward
dont use like 5 linq commands chained in a row and its quite straightforward
u sure it doesnt have title? that would mean the class doesnt implement the interface properly
unless the interface itself doesnt even specify a title property
then it would be weird cause the interface should only include stuff all classes that implement it can execute
I couldn't tell you
I am beyond confused on this one
trying to install a tpm onto my computer. can someone help?
there is an fTPM setting somewhere that you need to turn on
you can look that up in the manual for your board
can be found online on the vendor site, that will have the info where that is in the menu
amd ftpm switch?
thatโs what i need?
yep
amd cpu
how to save?
f10
thank us after it works lel
uhh how do i fix this?
download the windows 11 installer
very helpful advice
that is the installer
unless you want to remove all your data
install media
no
yes
bruh i did this for years
it goes through the damn installer and doesnt loose data unless u have smth incompatible
i mean that will work but has a 70% chance of wiping data
it gives you the option whether you want to upgrade or create a fresh installation
i had only 2 cases ever
out of hundreds of pcs
2 out of hundreds isnt 70percent
if you are getting the incompatible error its a hiiiigh chance
and it even tells you before it installs if it can keep all ur data
its obviously winupdate sucking ass like always
the point is use the upgrade tool not the installer
the health app even lists the compat data
it is
it downloads the iso and runs the setup.exe
They are basically the same thing
literally the installer
it either works or it doesnt do anything
i always used media creation tool
different tools for different uses
it literally says "upgrade and keep all data" or not
did they update the media creation tool to not need a usb stick?
it downloads the latest iso and just runs setup which checks for compatibility and then tells you if you can upgrade with keeping data
ever since win10 released it didnt need a stick
k what to do now?
Actually probably since 7 or maybe even vista, just mount ISO and run setup.exe
ye
see this is why i dont recommend the tool
just get the iso
but you select iso file
follow the instructions @latent mural
win8 they introduced dvd mounting in windows
dont need a dvd
k
@fair gull
Even cheaper on amazon and mindfactory

