#🌟│wooting80he
1 messages · Page 226 of 1
Sonnet
so yeah it sucks but like at least you have a board and support will correct it, im appreciating this mykeyclub total loss
Support wont correct it
firmware is in alpha
Mode sonnet
i mean sonnet pcb are readily available worst case scenario
how so?
if the pcb is malfunctioning and nothing can fix it, you can easily buy a new pcb on the aftermarket or from mode
as a last resort
So I had a 2nd one.
I used it and sent the other one back.
It had the same issue.
I spent about 300 on switches thus far because people led me to believe it was my fault.
it is kinda strange cause ive never heard of this issue on the sonnet
it was an issue with a keyboard called nd75 but it was fixed by simply changing the switches
but if that isnt working for you then something else must be wrong
have to open it constantly and press those prongs on the bottom of the pcb together.
This RGB with the sound of the Geon Raws would win for me.
You dont notice any 'stickiness' with the jade maxs?
when doing delicate strafing or slight off pressing any key?
I had 160 and they would all get sticky if not pressed directly down
I do actually. I was just testing them out fully and so far not a fan. The Jade Pro's are miles ahead which sucks cause the design of the max is better. Even in a normal MMO I found the movement getting stuck here and there.
Gateron offered me a refund if I sent them back the switches
I sent back 90 only because the other 70 a friend wanted
i warned him lol
Yeah I would say GEON raw right now are superior. But Jade Pro's are right there with them.
Yup, rocking the 50fg Geon Raws
perfection
the business man wins again
I gave them to him for free
Could have gotten the full 160 refund but I let him 'enjoy'
Dude I’m hungry
I’m starving
I can eat a tree
im have some coupons
Please bro save me I’m hungry
Go get a fucking banana
okay, ill send you my coupons
lol
Im tweaking bro its an itch
its for free lekkers
Sound like a nut it's a keyboard.
Lekkers smell like me
perfect,
ill send you my V1 lekkers too
just add milk
I didnt think Gateron would respond and I didnt want to charge a buddy for what I thought were faulty switches
Anyone else have heavy fingers? I feel like l45s are so light that ill have to tilt my hand to not accidently press them even with higher actuation point😂 might try to swap to l60s this week
Feels like im touching air
l45s too light.... l60s too heavy
do you care about travel distance?
Really? Ill try and see, im used to cherry mx red silents i think its avout the same as l60
For me, but its all personal
Yea probably is😹
Wait it seems like it should be similar as l45 if we look at starting force
im so confused
Like how far i have to press u mean?
im still torn between plastic and zinc...i plan on having this keyboard for 5 years though
so imo the price justifies
but idk i think the plastic sounds better
I need help
both are good yes but you might get some creaking with plastic case
like its in my state, and was delivered to the distro near me, but has not been shipped
call ups
I was told to wait, but ive gotten no kind of update
nothing we can do
A claim was already put on my package aswell
Contact both UPS and the Wooting customer support, that's all you can do
I contacted wooting several days ago
ill prob call UPS tmrw, as i attempted to a week ago, but their support tree is really wonky
@paper hornet just a waiting game then, and there is no probably, def call them tomorrow.
I know how to call them now though
alr
There probably should be a number on a support page or so
yes
Should be available in the next batch.
Check estimated date on purchase for which batch you will be in.
yes
You can kinda check availability here. Some JIS versions are still available for batch 2
Check your order status, or see the status of current and planned batches.
@mighty raft ur gonna have to wait either way, it should tell you the expected delivery when you go to the page. the longe you wait to buy the longer you could take to be ahead of others
someone else posted this
Im using the 50fg Raws with 3.4 travel distance
last i checked was jan
You can also just buy it standalone
https://wooting.io/product/wooting-80he-pcr-abs-case?Color=Frost
Arrival in warehouse mid december -> warehouse needs to prep to ship out -> start shipping during christmas rush -> christmas so nothing happens -> shipping continues after christmas
I can understand jan 9 estimated shipping to doorstep if the boards arrive at warehouse mid december
How do i submit a ticket to get the stuff thats currently alreaddy at warehouse shipped? i wanna order the abs case and build it in that while waiting for the white zinc alloy case
Yea i could swap out the springs too. Woooting sells them https://wooting.io/product/lekker-spring-packs?Weight=Linear60
Geon Sells 3 variants already
40gf, 50gf and 60gf
you could use these if you want something stronger
This spring is only available for GEONWORKS HE switches or Gatron HE switches and cannot be used on regular MX switches. 1 PACK = 110+5 SPRINGS : HE-compatible spring made of a special non-magnetic material that does not nourish the Hall sensor.: It is characterized by virtually zero ping even without lubrication. Mate
Geon does too but not much variance
I am deciding which one looks better, Do you guys think plastic pcr ghost edition looks better or black ?
You are keep asking that, why
cuz i can’t decide which one looks better
😭😭
Its all preference you like black get black
which one u got?
Ghost
I already said this
I have black
is there a sound difference or nah
plastic black or zinc
#1070668460905988106 check pictures here, you will get your answer
Just looks and swag
plastic black
do you play in the dark or a lighted room?
dark
I play in the dark also so I want less light leakage
I have a black zinc but the idea is the same
I would go for black because I would find light leakage of the ghost too much
i already lower the wooting light to 30%
oki thank u
?
choose 80he module then you will see frost case
its white transparent case
with white keycaps it looks so good
Unless you like the look of bright rgb in the dark, I would go for black plastic
I find it too distracting so I turn it down
Its just enough to be useful in a dark room
ghost might have too much light leak for you....
anyone with ghost that can confirm?
Nope
I regret not getting frost
No issues like that for me but i usually have my lights on cause i dont like eye strain
bro ghost and the lighting style when u press it turns yellow it’s so clean
but black is also fine
which light style is that?
I play with less blue light
I also just like being able to see what i‘m doing
Screen brightness is good enough
one of the standard lighting effects
get a monitor light🤓
blu
if u compare the ghost looks like cleaner
Ghost is really cool get that one trust
as long as you think it will be okay in the dark
then go for it
thx
It has already been a week since the batch update, so I guess the shipment for Brug should arrive in a week
If it says "expected at warehouse in december", I can still cancel it in november, right?
You can cancel anytime before it ships
🙏🏻
it could also be already otw from the plane
And you can put it on hold just to be extra sure
If we're lucky, yes
bet
i think its worth waiting ngl
also am i supposed to have the "iHasWooting" role
since i bought one
which ones are in the pic ?
Yes
You just became a founder, congrats! 🥳 But you might be left wondering how does one claim the actual Discord roles? Follow along
Join our Discord: https://wooting.io/discord
✨ Follow our socials! ✨
Discord https://wooting.io/discord
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social...
Nice
I did it like 4 times before, clicked refresh and the pink role didnt come
good it works now doe
*salmon

what is certified lekker, and i have wooting but only 77%
certified lekker is the role for anyone who bought a 2he lekker edition
Embark this journey with us on the 26th of September, when we launch the Wooting two Lekker Edition pre-orders. You will start to closely follow and join the development of the Lekker edition from manufacturing up to delivery in 2020 Q1, in real Wooting fashion. Vlogs, blogs, livestreams and educative information about manufacturing, running a b...
so, an 80he in general?
a limited edition 1000 unit board
ic
no
so isnt the regular one lekker v2?
the 80he uses lekker v2
ye
wb the cyan role?
for 80he backers
people who ordered it during the 80he founding campaign which was 1month from when we opened preorders
thats completely fine. (its just cosmetic in discord anyway)
ye
It is not that these Discords roles really matter anyway
you got a L45 pack tho
It will arrive at the warehouse next week and we still have to wait for delivery.
Very slow
i'm checking every day too 🔄
My opinion might be unpopular then 😛
Me too
(I have no idea what your profile says but I know it is probably Finnish (or Estonian, no idea how to tell those two apart) :P. Was just checking if you also have roles :))
You brug as well?
Discord roles are the most important treasure
no, discord badges are
Did anyone have issues with their 80he having an insanely tight screw? One of the screws on the back of the pcb are so tight I'm genuinely worried I might strip the screw before I get it out
Yes I m eu brug
that's not good, it could damage the plastic case (if your case is plastic). This has happened to some limited edition steamdeck oleds
It's so stupid tight it's not even funny I wish I could show how much pressure I'm putting to even try to unscrew it
good thing they put replacement screws in
mine was like that on the case, I unscrewed it with a knife
I couldnt with screwdriver
Phillips something
PH1 is the size we use for screwheads
That looks like PH0 
was about to say looks like 0 or 00
not for me tbh
y
erh yea that one is ph0 I've used ph1 too and it's worse it won't even sit in the screwhead
thats how you destroy screws
only the tip is supposed to be in the head
that's exactly why I'm confused on what to do here ph1 will not work at all
razer is a better option for me
same features for cheaper and i get a mouse on top
try tip of the knife
youre banned
which is
😱😭
Usable software 
Hey guys im new to WOOTING
I just ordered the 80HE
How can i track my order
huntsman is easily the worst sounding he keyboard
Access and edit your orders, connect your discord, and manage your Wooting account.
wait its not even he
huntsman is not a HE keyboard
it sounds better too
its optical
wooting
no good arguments for me personally
all the screws are ph1 on the 80 includinng case screws
its just a way worse product
does razer have analog
pretty sure 60he is also all ph1
ph1 fail too guess tip of knife it is
no arguments needed
thats not a ph1
ok if you think so thats great for you
Alright
which razer in specific u getting
Its in EU walvis
huntsman v3 pro probably, waiting for black week
The biggest problem with Razer is that you can't replace switch in case they fail, they are soldered to the board
Other than that (and software) they're pretty decent keyboards
Estimated delivery early january 2025????? Wowww
yeah my current switches are also failing already but its been running good besides that
I dont understand how is it a decent keyboard, also the price is garbage
so is it ph1 or ph00 or ph0 or are the markings on these screw tips wrong
its ph1
I rely too much on DKS and like too much gamepad mode to switch from Wooting now 
Also software 
My order says early january 2025 thats 2 months from now on😅😅
Yeah, I am not young anymore. Heck, my Steam account is old enough to drink 😛
You literally get drunkdeer for 80 dollars or even less on sales and it will be miles better lmao
dks?
ah there it is @midnight cloud
Razer Synapse is the worst piece of software I've ever had the displeasure to use
dynamic key stroke
wots that exactly
You never had the horrors of true Enterprise software
Yeah, Dynamic Keystroke https://help.wooting.io/article/99-how-to-use-dks
The purpose of this article is to explain the dynamic keystroke option our keyboard offers and how to configure and use it. What is DKS? Dynamic Keystroke is a
It says early january 2025 why does this take that long 😅
Fair enough
razer has that too
Manufacturing can only happen so fast. There arent thousands sitting in stock in some warehouse, unfortunately.
im getting mine fairly soon thankfully
5-21 nov, hopefully closer to 5 :))
Feels bad thinking i need to wait 2 months 🙈
JAN 2025 is not 100% so it may get delayed longer than that who knows
id say maybe just the wrong approach to smaller drivers like ph1 and smaller
around 6th to 19th november
I'm just trying every single screw I have this thing is so insanely stuck
They do?
Couldn't find anything
Wonder why you couldnt find anything
I vaguely remember something about that, but you could bind only 2 keys and it needed Synapse in background for it to work

I think they are just trolling at this point
Is wooting one on lvl with razer keyboard on market?
Razer is a better option 🤓☝️
it has "only" 2 phase so not as many as the dks
Though pros that have exclusivity contract switch to wooting
Imagine getting kicked from major because of snap tap

nobody cares about snap tap anymore
Razer has good mice and decent keyboards 
Software sucks, sure, but at least they doing something, unlike Logitech or SteelSeries
i hate logitech G HUB fr
But... Bbut what about g pro x rapid
Razer "on board" memory that only works if you have Synapse running in the background

I have to stock g502s before they remove old ones from market 
Onboard Memory Manager https://support.logi.com/hc/en-us/articles/360059641133-Onboard-Memory-Manager 

Hi!
is that the all piss yellow keycaps?
Yeah 
Hi, any Indians here who preordered the 80?
gmk too, the color gonna look bright as fuk
yea nope I can use ph0 ph00 ph1 for any other screw on this board but this one
flathead doesn't work knife doesn't work it's so stupid stuck I'm wondering how hard they tightened it
not that hard that they arent possible to remove
this sounds like an issue you might want to reach out to us about
I can remove every other screw on the board but this one is genuinely so stuck no head im using is working, I'll just write a ticket in a bit since it's working fine right now but it's definitely a problem if I can't remove the plate
please do so we can figure out a solution with you
It’s been almost 4 weeks with no response regarding 80HE that is completely unresponsive. When can i expect to get a reply from customer service?
4 weeks is totally unacceptable.
even order edit take less time than this
What are you contacting them about?
First regarding the 80HE not working and then regarding replacing it with black zinc as it’s white zinc.
I also need the return label that is needed to return it.
yep
nah thats to much
maybe send another email
i got both mouse and headphones from them and i don't use the app
I’ve already sent 3 seperate emails
could it be that somehow they didn't receive the email? If i was you i would send every day as well as trying to contact them on here everyday until you get at least some response
I did get automatic reply on each email so they did recieve them. Sending emails every day wouldn’t help and would just create more work for customer service.
it good that you are trying to be nice but after 4 weeks you gotta break some eggs to make an omelette
How long does it take to get to eu brug
wdym
How long does it take for EU brug to arrive at the warehouse?
they said you will probably receive confirmation email on the 31st October, but that is a conservative estimate and you might receive it a few day before. Im Eu-Brug as well and i just check the hub every day for a few seconds, it's not a big deal.
isn't dead on arrival first priority?
I'd assume so. But sending separate emails won't speed up anything and may even delay it.
Ok thanks you long time
To be fair, 2 of the emails were about seperate things.
ofc but almost a month
the email about the dead board was first?
Yes
your case is first priority so I don't know why they didn't help you yet
You really got the double whammy, not only dead on arrival but white case as well. You should seriously escalate on here. Well that's what i would do at least
waiting months then you get dead board this is trash experiences tbh
yeah i keep hearing about wootings amazing customer support but things like this shouldn't happen even with their usual "we are getting too much support requests please wait 2 weeks" response
well they delayed the orders like 2 whole months coz they don't wanna send to ppl dead board that's what they said then here we are
to be fair maybe they did fix it and his board is dead because of something else during transit
Broken / dead boards will happen for a lot of reasons in every keyboard. It's just nature with production.
yeah sure
It's a small amount reported out of the total from what I have seen. It lines up with normal production
yeah true but doesn't change the fact he is experience it now
But you ain't helping are you
hmm are you? lets not point fingers
Nah just reading their past replies.. We don't know what's happening with the ticket, their best bet is to make contact with staff.
It could been the fact they made multiple separate tickets. I know this adds delays with some systems.
It could be poor cs. We won't know and probably never will. So best not to start claiming stuff
The issue is i’m not able to get any contact with staff.
first priority 4 weeks no reply bro waited all this time with dead board without talking much about it when he talks you justify the delay coz he send another email?
come on now
you should keep trying you gave them enough time (4 weeks).
Try @ a mod. Since it's been 4 weeks they can have a look into it.
(Don't do this)
the guys order isn't being handled
lol
Hehe
Can someone recommend me some keycaps?
So what should be done in scenario where you get no response?
Just wait
There's thousands of mails coming in daily, and some issues, like defective keyboards, just need more time to be resolved
He waited 4 weeks already. Should he wait 4 Months? 4 Years? Any estimate?
As soon as possible. If you also have an issue with your keyboard or order, feel free to contact support either via mail or Hub.
just try flooding email, wooting team seems like they are missing old mails now.
also he is just discord moderator so he doesnt know anything tbf
wooting support queue number when?
is a wobbling/bent zinc alloy case a common problem or did i just get super unlucky? after like 1 month i just received a replacement zinc alloy case for my wobbling 80he and it has the same defect as the original one, wobbles in the same spot. and yes i made sure that its not my table, i literally tried every surface in my apartment and my other keyboards also dont wobble🙃
unlucky
raw zinc not wobbling gg
I also got a wobbly one, contacted support for that one
CS is making priorities in cases
So we try to address the biggest issues like non-functional boards first, then address the cosmetic damages for instance. As those need to be solved a lot quicker.
Wobble would probably fall under the cosmetic side of things, so it will probably be addressed a bit later on.
'unresponsive' though lmao
If a first priority issue takes 4 weeks to resolve i don't want to know what a 3rd priority issue is going to take
I have no clue exactly on the status of things, I do know there is a fair deal of people handling multiple topics
@worn compass
xd
I got a USPS noti that I had a package arriving today so I was hoping it'd be my 80he. Guess it'll be a lil longer
what is waitimg times for 80he+ to arrive i want to order 1 for my friend and idk if it would come before christmas
checkout should say
but ngl it might not
Zinc Alloy or PCR Plastic?
really?
lmao I meant the dude asking for his friend xD
ya
I know 
nothing earlier than dec or Jan
the next batch will be mid december😭
risky christmas gift
I wanted the Zinc Alloy Raw, but couldn't be bothered waiting forever 
Got the Ghost Case
i would be playing roulletw with those dates
I ordered mine October 3rd and it's almost here. It's gonna be cutting close tho ngl
did u pay for the tracking?
Can I see live where 'hk-qiao' is being transported?
In this case, how come last week a message in ”community_support” was forwarded internally regarding comestic issue and when I asked about my email regarding unresponsive 80HE I got no reponse in the same thread even though my support email was sent earlier?
go for plastic now ppl ordered since march and some of them still didn't get their board coz of the zinc
nah probably not
hk qiao is delivered on land
Yeah, I can agree it is rough rn. The community support is mostly community based, now and the someone of the team might respond on that, but it doesn't guarantee it. Mostly just a way for community members to quickly help each other out.
I can check your message to see if it landed correctly in our inbox, you can DM me your email.
Thank you, DMed it.
Why does my A key (left) look sticky, and the same rt setting is slower than other keys?
Similarly, rt0.1 is one step slower than other buttons.
oh idk
NA-Ship before Eu plane 💀
(also, the white is a poor choice for the water)
Yep I though white was land for a sec 😂
same
Well would acually be fine if land was greenish instead of blue-grey
When 80HE can 0.01mm RT
When i eat it
But... why?
Don’t need 0.01 ,0.1 is best,but now it’s 0.15

Other brands will even make separate adaptations for different switch
lol
they didn't even deliver all first batch boards and you want them to work on this
Swappin these out was pretty aids 😂
The Raw Zinc looks so cool. It is definately on my wishlist for christmas lol
Any company that claims 0.01mm is either outright lying or they are intentionally misleading customers by excluding a so-called "deadzone" at the start and end of the press from this measurement.
The 80HE just like the 60HE measures switch position within a keypress far more precisely than 0.15mm but that precision is completely irrelevant during use.
By far the most important measurement is start and end of keypress accuracy.
Do people really notice 0.01mm? 
no people are just suckers for marketing

Although there is no option to adapt the switch, my 80he now seems to have no problem with nonlekker switches.
Yea and most people dont even tailor the setting to themselves they just copy paste a pro player or just go with lowest actuation and low on everything for ”fast responsive experience”😂
Anyone have any good ideas for key cap colors with a frost case? It looks kind of weird with black keycaps, should I just get white?
try to look at as many builds u can and buy the combo that u like the best
lmao not at all
0.1 is already hard enough to notice
like i don't think anyone on this planet is capable of getting the difference from like 2mm and 2.1mm
why?
were they hard to pull out?
i have seen a couple of people with that issue
Yea i watched sanders guide used method 2 idk some definetily were stuck like glue lol, i found it easier not to wiggle or raise from bottom, just straight out yoink it upwards as straight as possible😂 idk if i actually damges the switches , they looked fine as far as i can tell no cracks in window etc. Was a lot easier that way for me at least.
Did not want to go through method 1 and unscrew everything
hopefully i have no problems 😭
I'll put them in and never remove them
apart from maybe wasd and some other stuff if i gotta change them
I dont think its an ”issue” per se . They should be there real good imo. The option 1 would have been a lot less force needed and better exp overall i think
I was just lazy
Those were my thoughts exactly then i was like okay im swapping all of these my ocd cant handle this

lol
idk what's better for my spacebar
to use
if lekkers or the geons
Nah it’s a free website
cuz i gotta change the spring on the geons or the 45s if i wanna use them
cuz of the weight of ceramic
You can look up vessel trackers and one out of the first three has up to date tracking
U should try them first then ull know. Dont rush it feel em out👍🏽
oh ye ofc
Cant even try my new L60s that ijust installed cause baby girl is asleep in my gaming room
so stoked cant wait
go full frosted and get frosted clear keycaps
Ye imo they even sounded more thocky and silent
Does wooting happen to have any plans to make a numpad to go with the 80HE that would have a raw zinc case?
I assume no, but does anybody know of any such numpads that have a similar finish to the raw zinc case?
We don't, sorry 😦
Nothing shared publicly anyway 
Think we are like the only brand offering a 'raw' case in some shape
Giving the people hope aye lol
WootPad hope restored
Hmm... I guess I'll buy the majestouch white one and try to give it a DIY finish
lmao
omg deer furry
where can i get some nice red n black keycaps that are cheapish
Aliexpress, amazon (basically just aliexpress with a dropshipper inbetween lol)
i need some nice ones tho that arent like 100 😭
alieexpress
aight ill give ali a look
Epomaker or Akko sometimes have some good afforable keycaps. Been a while I looked there though. So not sure if things have changed.
sander I'm ur biggest fan
me when
this fat ass
guys help me decide what is better black version or ghost
black is basic, ghost seems nice
I got the black because I'm gonna buy other cases soon anyway.
hi wootgang
are the lekker v2 switches good?
not even on my hand yet
that is why i like black, but ghost does still looks nice, just doesn't always look better imo
i would say so too, tried em on my 60HE+ (steel plate) and my 80HE
Eu getting on the plane yet?
Finally got mine setup!
sooo clean!
GMK stealth
You guys think there will be any good deals on keycaps for black friday/cyber monday?
Seems like Gateron begin to sell boxed stem Jade Gaming switches
I was about to think about Jade Pro, then this dropped... now I have to reconsider and wait for review on this
and see if they are going to release Jade Pro Gaming switches as well D:
They seem like just the Pros with a box stem
I’d just get the pros if that’s what you want
where were your Jade Max switch go
are my wooting settings i put in wotility the same if i plug my keyboard into another pc? will the settings convert
The max is still there
in-memory ones that saved directly to keyboard will carry over
any profile you switch with fn+1,2,3 is stored into your keyboard
i just go into the wootility and change
it should say it's saved or something
is geon max better than jade max?
I spoke with one guy with Jade Max switch and he said he don't have sticky key press issue with his keyboard
but he also thinks this actually might come down to keycap you are using
if that's true, that actually come down to QC issue from gateron on their stem
It’s Geon Max bc I also bought the Geon RAWs as a backup plan if my Maxes were also affected, so I combined both for a cursed meme name
LOL
That is the official backstory anyway
I don’t have my keyboard yet (white zinc not getting here til early December)
oh right
Without the keyboard correct
you opted to wait for v2 white zinc?
V1
oh
After the initial reviews came out for white zinc it was taken out of production but the hub didn’t reflect that until the batch update so the zincs are slightly behind (2-3 weeks from rest of batch 2)
hmm not sure how boxed stem of jade gaming going to help further with wobble
I’ve tried box stem ones on my current keyboard (Rog Azoth moonlight). Not sure I like them tbh
I’d just go pros and not overthink it
And go with what works
Yeah, probably... but I am not in particular hurry with it, so at least I want some video of it before making decision
Box stem has been awful so far for all the ones I’ve tried
Yeah I’m with sno on box stems, not a big fan
I’m waiting to see if ttc Pom magneto will be better but so far I’ve hated all of the ones I’ve tried
is it scratchy?
That and all current box stems are super high plastic sound which doesn’t make me want to really stick with them
Yeah, that’s just how box stems tend to be
And stability wise some of them were worse at the top vs geon raw he
Here's a quick sound test of the NEW Gateron Magnetic Jade Gaming Switches. A quick video for those who enjoy a clackity-clack sound profile on their Hall Effect Keyboard.
*The last bit is for the gamers who control their movement keys at an angle
I'm very busy with product review projects at the moment as well as a move so I have not been as a...
People measure bottom out but forget that top wobble is a thing too
Box stem measure more stable at bottom because of the stem, but they can be wobbler at the top vs a tight non box like geon raw he
Not super impressed by the Gaming switch, looks kinda strange and seems like a Pro recolor with a different stem shape
he seems like struggling to put that jade gaming down smoothly
I can even see that on video jesus... that just look scratchy
when he press it slowly, he stutters
dude.. I don't even think I need to watch any more
After the maxes I’m decently skeptical of new Gateron releases
yeah, I was thinking about Maxes as well
but after what I heard, I was thinking Pro might be just better for me
I can't guarentee how max will play nicely with my keycap as well
If I was in your shoes I’d go either Pro or RAWs tbh
I should look more into geon raws too
My raws came in today and I’m kinda impressed with their stock
og jades were much better than box idiot jades
Yeah idk what they were thinking
I got mine in polybag about two weeks ago. and somehow nothing was damaged except for the boxes
W shipping
even that 45g lekker v2 switch case were properly closed, undamaged I was surprised
UPS went total nuts mine went to wrong hub too, so there was unnecessary extra trip and somehow survived.. I must say I was more luckier than most
but "unboxing" magic was gone since box was kinda cheap and all crumbled
Btw it looks like batch 2 has arrived at the docs!!!!
OH NICe
NOICE
Might need someone to take pictures from the sandy beaches when we can see our ship lol
I wonder how the plane are doing
please tell fulfillment center no more Polybag
Somebody drive to the dock
Take pictures and live report

At this rate we should expect our packages in like 2-3 weeks

Your shipping was sponsored by the white zinc delay 🥲

Well good thing I avoided white zinc
I blame Hipyo
It was going so well 😭
Trueee
Idk last time I went on a rant with hypio. That review of his missed so hard, it felt like he woke up on the wrong side of the bed and wanted to trash wooting
He had a few good points, but other than that idk man
It rubs me the wrong way when wooting replied on his video he said “I have high standards for keyboards”
Im kind of surprised by Hipyo's review. He had quite a shift from the 60HE vid to the 80HE one.
Called the plastic cheap when both are similarly priced and just seemed he was forced into doing the review so he chose to make it negative this time

His sensationalism did real world harm for white zinc which I’m kinda upset by tbh
His review is whatever but he is responsible for mine being late now so that’s cool
yea add to his dislike count for that vid 
You know what
I’m going to do the same
743 dislikes now
yeah im always willing to point out company glazing but hipyos video just didnt seem that reasonable/realistic' to me. i guess the comment abt gasket mount feel is personal preference tho
hipyo video keep coming up with searching keyboad and stuff so I installed addon just to block his existence
also i wouldnt say theres a ton of competition with hall effect kbs yet given more than half the competition shows measurably inconsistent and higher latency
when you make hit piece instead of genuine video, that's block for me
and guy don't even have balls to keep his thumbnail
It used to be it was "IT'S MID" before "I'M MAD"
ship is supposed to port in LA tomorrow 🙌
the paint thing was weird cus the same applies to all matte painted stuff
If I rub keyboard puller on Hipyo's face, he wouldn't be scarless either
but i will say i would love a 90s style compaq pc paint job case lol
Honestly seems like he took the approach he did to engagement farm
You know what, count me in
On my way to dislike
I still don’t understand him going on about the keyboard being scratched but then glossing over that he “fixed the scratch” with an eraser.
Unless I’m missing something and the eraser repaints the keeb, isn’t that definitionally not a scratch?
u czn use ur wet finger too
the scratch is bits of soft metal from the puller, not the case under the paint
well, a scuff mark
That’s what I figured. It’s basically the same way a pencil writes by just depositing graphite onto stuff.
Just felt like he was finding any excuse to nitpick so noone could say he was "glazing"
I think criticism is good, even for the product being reviewed. But seems either wildly incompetent or flat out dishonest to call an erasable mark a scratch.
He can enjoy a product and express that without glazing. Feel like he legitimately was trying to farm clicks by having a different opinion but it’s just like wrong and super forced negative feedback
I don't know how this guy is "reputable" are people's standard that low?
Once he said that the Rapid trigger tech did nothing I honestly thought the video was satire
i haven't seen hardware review that disingenuous, clueless and clickbait
even bad ones have some redeemable quality, but this really didn't have it
I will say my ghost case is warped, I’m not super thrilled that it’s warped and if I were to review it, I’d definitely point out that my keeb is warped. I haven’t gotten a response from wooting customer support yet after reaching out on Wednesday, which is in their transparent customer support time window, but still feels a bit bad.
But if I ignore the warp, which it’s mild enough that I can play and ignore it for the time being, it’s a good keyboard.
warp is never good, id be frustrated too
but they will def get it sorted out for you
It’s just a shameless video and a shameless creator trying to have that “hot take”
more shameless and clickbait "hot take" than LTT. At least Linus is somewhat useful
That’s where I’m at. If I were reviewing it I’d point it out, but they’ve already said they are handling reported warped keebs. So it’s just a waiting game.
I hope they can just send a new top and/or bottom case piece, so I don’t have to take all my switched and keycaps off. But we’ll see.
I’m also not a keyboard reviewer so
I did watch hipyo time to time as his video does come up with hardware search in youtube... after that shit excuse of a video, now my browser extension delete him out of existence.
i specifically installed that extension to block him mainly
Wait warped 
His video didnt sit well with me which is fine, but it became personal when he touched the white zinc and caused the hysteria 😢
I watched his stuff when I was more into custom keebs. Last time I actively followed him he was still pretty good.
I just don’t know if he woke up in a bad mood, or was burnt out, or dropped the zinc case on his toe, but he just seemed like he was being massively unfair to the keyboard. Definitely a big miss for him.
he won't get views out of me now
His analysis of the PCR was just “I don’t like plastic” basically. Then his review of the metal was “I don’t know how painted metal works”
Which, not a great review imo
I noticed that too for the plastic, plastic is plastic so idk what he was expecting
Also said the innovative software that everyone loves does nothing which is just a lie
there isnt a magical super plastic that will make you think its not plastic
he clearly hasn't spent enough time with Synapse or Armourycrate
if you make things thick they will complain about that too, "it's too thick"
Yeh he was complaining about plastic being light and feeling cheap.
Like yes, that is plastic, thank you for noticing. Should wooting have invented some ultra heavy plastic for this keyboard? Build it out of vulcanized rubber?
if you make it too dense "it's too heavy"
low key id try Vulcanized rubber
that sounds cool
I can’t even buy a razer mouse bc I hate the software
It does sound sick. Who needs gasket mount when the whole keeb is rubber👀
saves you some money too
Wooting x Michelin Tire
@dim quartz my cerakeys comes in friday, if i dont like them, i blame you
pirelli better (brought to you by f1)
Crazy work
they convinced me so its on them 
Goodyear. That way every wooting can be delivered via blimp.
Idk if I could game with cerakeys, like what do they feel like on your fingers especially over long sessions, and are they affected by humidity?
Lets hope you get a W batch 🙏 , bless geon
I hope you like it
no clue, never used them
strictly bought them off impulse and peer review 
Pray to Faker and I heard you get blessed for life
Faker the lord and savior
idk if its true, but Sno said it so it has to be true
i also got the new GMK cosmos pre ordered so if i dont like them imma switch to the GMK's
We're Keycap switch twins xD
Raw's and cosmos?
Jade Max --> got RAWs in case, Cerakeys ---> Cosmos in case
I pray to Bin and Elk
I didnt get em since Im going for white zinc, but I got the GMK Lazurite set
I’ve been rocking my KAT Iron and it looks so good on the ghost.
Phone doesn’t do it justice
gonna have to find, gimme a few, saw it the other day
Interesting color choice, looks nice
not white but it would be pretty similar
different color gradiants look nice on the ghost
looks so clean
I mainly went for the white wrist rest so it shows dust less. But it goes pretty well with Iron.
obviously not the 80HE but you get the colorway idea
Not the worst ive seen for mismatching colors, looks better than I expected. I think it might go better with the RAW case maybe
raw would look super nice
for the real metallic star experience
i got black zinc and want the star look on the keycaps
I got the ghost but I’m gonna wait to see what other cases come out to see if I wanna stick with it and match that or get a different case and keycaps
i think it will look sleek with the purple RGB coming through
I think theres an 3rd party alumaze case in the works if you're into aluminum
same~ Or I just get a different keycap set
Yeah I might do that as well, just wanna see ghost in person before I make that decision
I’ll keep an eye out for that. I’m not too particular on material more so look/colorway
anyone knows if i need different springs if i use cerakeys? i bought the 80he with gateron jades
Hello everyone! anyone have their keyboards freezing and having to disconnect and connect?
turn polling down to 1k
It started doing today. Concidentilly, Im trying some new key caps
But it never did before
there's something with certain computer configs that seem to trigger usb high power issues with 8k polling on
but problem goes away if you set it to 1k
Will try this now! But it has not happened ever since I got the keyboard (almost a week now)
And it has always been in 8k pooling
Whenever they do fully diagnose what causes this I'd be so curious to know
Whether it's a specific firmware issue with some systems or if it's usb ports not providing enough juice for consistent 8k poll at all times or whatever else is causing it. It's been such an odd bug
bitch what
why do they come so early
i gotta wait so long for mine
i was curious about ceraleys then i saw the price
Is there a Guide on how to make my 80he a Bit more „thocky“?
Also curious... I was working fine ever since I swapped some keycaps
tapemod and poly fill
Not really no. You could just use the V2 lekkers/black knights and then dampen it to the high heavens but that’s about all you can do
Was this a coincidence, or I don't know! Is this only happening on the Zync allow cases? I'm wondering since I'm using a lower profile of keycaps if there is any shortcircuiting happening!
try changing out the keycaps and see if it makes a difference
Will Look that up, thank you!
in theory it shouldnt as they are just keycaps but who knows
Thank you!
oh yeah some heavy keycaps might help too
I did, but because the bug is not consistent (or I did not find the reproduction pattern), it did not seem to make a change. At first I thought it was related with typing while having wootility open, but that does not seem to be the case!
Thats interesting, do you have any other USB's plugged in that could be interfering?
I'm using the Wooting one
anyone getting an issue where ur keyboard just hold one input and you cant do anything until you unplug and replug it?
Decided to add a bambu wrist rest and some high constrast keycaps to add some "flare" to the setup! They are a different profile than the Cherry ones (despite being listed as Cherry on the Amazon page) and not translucent, which removes a bit of the RGB power. But I like the mix, what do you think?
Definitely no delays
It may be related with the 8k pooling like my bug as well.
Is the keyboard plugged directly into your Motherboard? are you using any pass throughs? Any other USB's plugged into your pc that could be interfering?
cant believed it has been 2 weeks
Nope, directly at the laptop USB-C port!
So does that mean the orders should be shipped from the warehouse this week earlier than expected?
They're definitely not delayed which is good news
Difficult to say now if the transport will be earlier than we expected
Mine says 15-25th of nov and I’m already in Los Angeles and I paid for expedited shipping
Seems like it shouldn’t take another two weeks if they get to the warehouse tomorrow right
interesting, definitely a weird issue
That looks super good god damn
I want a raw case so bad they all look so good

Are you thinking of getting some non shine through white caps to go with the yellow/purple ones?
I think that would look sick
omg it's so close
You just became a founder, congrats! 🥳 But you might be left wondering how does one claim the actual Discord roles? Follow along
Join our Discord: https://wooting.io/discord
✨ Follow our socials! ✨
Discord https://wooting.io/discord
Twitter https://www.twitter.com/wootingkb
Instagram https://www.instagram.com/wootingkb
Customer Support: social...
Thanks
Can’t believe it’s almost here! Hopefully it’ll come today
Also it seems like it’s on Terrestrial tracking instead satellite
If anyone else has a sticky key w/ stabilizier just had to take my module apart and clean the sticky grease from the stabilizer pads
But now it's all good
oo
It won't. Still a lot for the warehouse to do
any reason i dont have the wooting60he role?
or what are the requirements for it
or the NA-whale tag?
Founder only
ahhh ok
That's the batch for people waiting
im currently waiting?
Might be 80he only or not linked. I'm not too sure
im linked + ordered 80he
I know but I’m talking about the cargo containment coming to the port at least
Make sure you have batch updates ticked on your profile in the hub
Thanks for the message mate! Well, I definitely like the shine-through for the letter keys as it helps while typing during the night/low light conditions. So I'm thinking of keeping them as it is, and just turning down the RGB Brightness in case I'm sick of it. But a White Color + Black legend keycaps would definitely add to the look. Maybe in the near future! The RAW zinc looks and feels amazing so far!
goat ty
Just noticed that for some reason my laptop changed to the Balanced power mode. I'm gonna put it back on Ultimate Performance and check if there is any change!
Bros handsome 👑
Forget that @thin glacier ! Even on ultimate performance the bug happens!
damn i was hoping you were onto something there XD
Help, ive taken apart the 80he and ive greased up the stabilizers and now i wanna put them back in but idk how bc there is no full gap for the wire to go in
Also should the bends of the wire face north or south of the keyboard
Take a chance
Do the stabilizers have to click anywhere of just sit loose?
Spacebar is south and the smaller stabilizers are north ive found out
Is this how they should be? Or have i done something wrong
I’d ask in the keyboard modding channel, they’re pretty helpful
not 100% sure, i agree with varedis, ask in the modding section as they take their keyboard apart all the time
Ty
But when switching back to 1k pooling it does not happen yet!
So hopefully a firmware update will fix the issue
Another day checking if batch 2 white zinc v1 is out early 
I'm curious if there is a correlation with keycaps, or phisical attributes and the bug
my 80he keeps messing up and it starts just randomly holding down keys when i am playing deadlockj
is it broken
and its not me, i dont have my hands on the keyboard and i have to unplug it to fix it
try 1k pooling
🙏🙏🙏🔥🔥🔥🔥🔥🔥
A question, when i bought my 60he i didnt need to put adress 2 right? That is optional?
Thats optional and this is the wrong channel btw
3 weeks until we can confirm our orders batch 2 guys!!!!
Ship might be here a bit early but we still have to wait for customs clearance and preparations for delivery
Just in time for some American handling
Wym¿
Lmao
Wooting should have all that business sorted out with the mess that happened with batch 1 NA deliveries
NA Batch 2 guys should be fineeeeeee
Mmmmmmm
I hope it gets cleared through customs quickly
Dead ass my reaction to the white zinc delay
My hopes and dreams shriveling away
I was so close to switching my order to zinc but then I realized I had no money
I think you’re broken bro
80he where bros
Pretty sure theres a video made by wooting showing a fix
Thats super interesting, whats your laptop specs if you dont mind me asking
i suspect it could be a power draw thing too. I saw some weird stuff happening before on 8k poll infrequently
like the keyboard would be fine but then my stream deck plugged into a totally different port would disconnect/reconnect once in awhile
somehow it was like there wasn't enough stable power or something like that for all the usb devices
I wonder how long did it take batch 1 to get through customs in na
Maybe we could expect the same thing or later
They said up to a week
And for it to get prepared for shipping up to 10 business days
Its possible but also could be unlikely. USA does a lot of random container inspections that can take days to complete
This was over 2 hours ago if yall are wondering
Shout out to @verbal solar for keeping us updated
I've been monitoring it lately but it feels so far 🙃
Ikr!
Is it actually still a full day away?
I think theres a chance it can be today but it’d be really late at night
Id like that 😄
A day earlier is still a day earlier, any time sooner is good
noo where is white 80he?
Can't wait to see the ship on the live webcam of the ports 👀
Delayed
oh i see
Making a v2 of the metal white case so currently unavailable until they make an improved version
I wanna build full white setup. White 80he is just the right keyboard
It might take a while just letting you know
link
dont make me buy razor pls
What if we want the current with all its current problems and defects
https://www.earthcam.com/usa/california/losangeles/port/?cam=portofla Idk if it'll show up here to be exact
EarthCam and the Port of Los Angeles have partnered to bring you live views of what’s happening in Los Angeles Harbor. Camera 1 streams from the center of the Port of Los Angeles Main Channel in San Pedro, featuring views of historic battleship USS Iowa, Wilmington Clock Tower, Everport Container Terminal, Terminal Island, and San Pedro Promenad...
We need collectables 
I like unprotected port cams
me too
Lolwhat
how you even find this lmaooo
Is that the port our boy will be floating into?
People who already bought it have the option to receive the v1, new buyers wont be able to get it tho
ye
Love that haha
We need 80heeeeee
Awww it’s expected to arrive tomorrow night :(
Just get the frost case until the white zinc becomes available again
So slight delay?
I dont think so, think its a default auto update sorta thing.
it says expected arrival 10/23/24 @ 0:00
Idk why they started slowing down as they got closer to LA
Went from 19-20MPH to 13
yeah im pretty sure they have like appointments for the ships to dock at the port cuz theres so many
So our ship might not be able to dock until tomorrow cuz thats when the appointment is
Tomorrow makes sense
That makes a lot of sense, so it’ll technically arrive today, they just wont be able to dock till tomorrow
Kinda sucks but its whatever
It arrived on time anyway
Yeah im pretty certain the docking appointment is made before they start the voyage
so even if they come in early, they still gotta wait until the appointment
We still have a chance of customs going smoothly
For sure, if we get random'd on the container check its gonna be a while though
But even so after that we gotta wait up to 10 business days for it to get ready to ship
well its gotta go from LA to vegas once it clears customs
Ye, to get prepared for shipping
And then we confirm our orders and then its on its way to our homes
Nov 11 feels like forever tbh…
And thats only order confirmations!
After that we gotta wait for our orders to be delivered

mine says november 17 LOL
Haha real.
I’m hoping we get it by like November 20th
we can only hope the random checks dont happen for out shippment
so close yet so far...
What should I do if a support ticket hasn’t been answered for ~5 days
Cus my keyboard has been missing for 2 weeks
I’m calling UPS rn, but I haven’t heard from wooting quite yet
Hmm, I have no idea, although if I was you I would just email them again
Alright
What kind of ticket do I open
Cus I don’t know
I just called UPS
And they said they can’t ship my package
I wanna ping someone on the wooting team, but I’m not sure if I should
Cus frankly I’m now worried that I’ve just wasted 300$ on a keyboard everyone got but me
Why are they saying they cant ship it?
Damages
UPS is saying they cant shit it to you because its damaged?
I have never heard of UPS doing that
actually
they may have sent it back to wooting since it was damaged badly
Well what am I supposed to do
Im assuming you sent wooting an email already?
I payed for expedited shipping
They haven’t responded yet
I’ve had USPS refuse to deliver an Amazon package due to damage, so isn’t surprising. It’s a policy
I opted in for the v1 white paint too so I can get it earlier
Now I’m just shit outta luck and I’m gonna probably get my keyboard after the 2nd batch
@paper hornet idk what timezone your in but mark is usually on early in the mornings and might be able to help if you can catch him in this chat
It’s 5:00 pm for me right now
I’m in Maryland US
Okay so your east coast
yeah so around 10-11 am your time i usually see him in this chat
tbh i think anyone iwth the purple role will be able to assist you but idk
Hopefully :/






