#🌟│wooting80he
1 messages · Page 40 of 1
second is lekker?
yesssssssss

ye, it might be less natural to others hence i said that it is so in my opinion, but i'm almost certain you'll find it quite natural once your board arrives
ahh, yeah i was confused, i listen the previous audio and it didn't make sense to me xd
Man I got the zinc too but the ghost looks so nice
audio file said lekker vs jade so i guess it was that order
This. You should tell me what did indeed improve you performance and it what case you can measure it
surprise factor lol 😛
First of all we need to understand your position on performance. Just like cars. Just because something has 1000hp doesn’t makes you go faster
I use wooting on trackmania and it 100%does make me go faster
The analogue is game chabger
That’s a good point. But do you understand why it’s making you go faster besides the rapid trigger?
gonna replace my actual car's steering wheel with the 80he
cars and keybaord who would have thought 😛
Haha i wish
Well, I am a car guy and love HiFi. Both trigger the same emotional response as a good keyboard 😆
i think wooting can develop the best he steering wheel and it would be very precise as they have the software tuned to perfection
Its not even about rapid trigger just the fact i can turn at 65% or 47% steering instead of 100% or nothing.
i like personal hifi, iems dac etc but cars and big projects won't be able to afford all that as i know i'm crazy 😄
there are certain things HE keyboard allows you to do such as inputting a specific turn angle due to analog inputs and software (that are not possible on a non HE keyboard)
You can accurate pinpoint the reason of the performance gain in your case. But wooting is getting more competition now days in this department.
while rapid trigger allows you to perform repeated presses faster and more consistently
Yeah i mean controllers and flight sticks can do just that too. Im just used to kb
Also on osu i heard rapid trigger is very noticeable
To fully make use of this performance feature. One needs to learn how to use it.
not to jump in between you guys but it's clear HE keyboards have lots of advantages to customize but it will never make normal keyboards obsolete. all can exist together and for each to their own not sure where this is going to be honest.
again, not really, any person just mashing a key will end up with more presses in total on HE board due to how rapid trigger makes the "switch" behave
Yeah, but some guy was asking about numbers and measurements to confirm the claimed performance gains. Just like any tech. There’s a limit to how much you can improve with the current generation. I feel that comparing spec is useless. The community feedback is more important at this point.
Ofc normal people (normies) won’t be in this chat 💬 we’re the enlightened ones ☝️
If you want numbers look at the ... just copied wooting series from optimum
haha i like that 🫡
Are those wooting Double Shot keycabs nice or there better ones out there?
Its preference
for me it is good and i like shine through, maybe you have higher standards 🙂
I have the cerakeys. They came in bent af but sent me replacements
Is there a zinc sound sample
Next week
Those Are very expensive
In Germany its over 140
they had sound test on the announcement video but not sure if it was the zinc case
Oh i got it while discount and shipping cheap since im in asia
Im eye balling the x-ray from kbdfans
X-ray Keycaps A translucent minimal keycap setinspired by transparent tech accessories. Available as an in-stock drop Q2 2024. Scroll down to learn more, and fill out the interest check form to leave feedback as we finalize the design. X-ray Keycaps – Overview X-ray is a keycap set that features a clear-on-white, low-c
Ceramic is too glossy
I like the rgb on it. Mostly use my kb at night
Very edible
Seine True rgb on them ?
Shine True
Xray idk
i feel weird accepting the default wooting keycaps now...hmmm
do they have an image wit rgb on?
Nah not even released yet
Nice
i'm assuming its going to be dope and how light will reflect on them
Guys whats different between the 80he's plastic case and the zinc alloy? Will it be any different in performance and experience since the zinc cost almost double the price?
bro i want to buy ghost case but 50€ + the 300 from the zinc wooting
u think they will do an offer someday?
i want some high quality carbon colorway keycaps that are not super tall, any ideas where i can get them
Nah never seen carbon keycaps. Some other guy was wanting the same
It's just a case. It won't make you a better gamer, if you pick the much heavier metal zinc case
Can we get a discount cupon for a plastic case if we bought the zinc one
Otherwise we would have to redo our orders to get both
if i do this it comes with the travel case or only for fully assembled?
where do we get role and website name stuff?
another white zinc gamer

and plastic because why not
@jolly tangle but do i get that discount on plastic case ?
you know you cant combine a plastic bottom with a zinc top right?
discount?
just look into your basket if there is its automaticly applied
@jolly tangle so if i buy zinc varriant and then add plastic case it offers mem plastic case for 10$
This is the way :)))
I'm glued to discord to see what they answer if they give code for this to 10€ I buy it,the bad thing that I already ordered and would go to 20€ but better than 50€ xd or if not get a code but say that stays with the offer I will cancel order and do it again because I will like to have the 2cases
idk how pricing works I dont even work for wooting
whats the difference between the black and ghost color?
ghoast is translucant
That does sound kinda cool
Also, is the zinc worth it for 50% more?
Yes if you have the money
what difference does it make?
cosmetic
I would say no
it will also provide a different sound profile.
I can afford it, just think ghost is going to be my favorite style. I already have black and white keyboards
Cosmetic, sound, durability, weight
Why not? Shouldn't they have The exact same screw in and contact points?
Ghost does look pretty sick
I was going to get that but waifu told me to go for zinc lol
I think u can combine plastic with zinc
Combine or switch?
The led bleed on ghost looks magical ngl
Technically should be able to combine
Like zinc btm plastic top
It really does
That's one of the reasons why I was gonna get it
Ohh that's a cool idea
I have a question, Is wooting 80he better than wooting 60he??
Can't the mounting mechanism is different
Really? Arent they both gasket
In what way
add that you can take a picture to upload it to reddit r/pcmasterrace otherwise not,jk 😅
🤷

It has new features and has 8k polling
Spec wise, yes its more advanced. Its also just objectively better in every sense unless you prefer the 60% layout and youre adamant on getting it
80HE is seriously the endgame keyboard for me

You can alt f4 with unparalleled speed 
is gonna consume more cpu than normal right? i mean not even noticeable i think i read maybe it was a lie
Is it more profitable for me to wait until July for an 80he or buy the 60he now?
Personal decision
comparable with a 1k hz mouse
what it means??
reduced latency
8k polling = keyboard sends key press data 8,000 times a second vs 1,000 times a second on the 60HE
8k polling rate mouse + 8k polling rate in keyboard is the gamer's pinnacle
I mean you could be part of the founders campaign and also get a free switch pack
Effectively 1/8th the average latency to 0.125ms from 1ms
1ms is good enough for me
rn some game struggles to even have 4k polling for mouse
or even 2
Mouse polling rate is a lot more taxing than kb
yeah and some game doesnt really support it so ur mouse movement will feel really off
I tried 300 microseconds on my ULX and I really love it so I think the 80HE would be around that for total device latency or less
yep. My mouse is up to 4k polling but I use 2k polling and feels no different lol
Ya I read that keyboard higher polling doesn't affect PC performance
yeah i use 2k polling rn too, 8k just too much for something u cant really feel
I notice the diff from 2k to 4k, 8k not so much...
I mean my monitor is “only” 144hz so that’s very much a factor as well.
Need 8k hz monitor to feel it lul
Same, I just use my ULX at 1k and it feels the same on my PG27AQN, just that the click latency is actually BETTER on 1k than the others due to the subtick packet
u can see it moves smoother but thats about it
Facts
Nah I feel it in game too, I play some esports...its not huge tho
I want a pg27aqn for that ulmb2 but the price is too much for me to stomach lolll
for me it depends on the game, some game 8k just make mouse movement worse
PG248QP, less money and very good TN panel, or the XL2586X
true...
I got a big ass 4k OLED monitor
I stopped caring about being competitive and wanted something that would look good with console games too
The asus 540Hz has ULMB 2, and the BenQ 540Hz has DyAc 2
i feel like i can feel it on 4k compared to 1k its a sweet spot for most games as well but you will see some fp sdrops esp on widnows 10
Can I choose to have the l45 shipped from the factory?
Me and my 38” ultrawide enjoying helldivers 2 :>
windows 11 is better optomized for higher polling
Do u know when ULX next batch would be coming out, i rly want it 😭
Preassembled? No
Thanks
Democracy enjoyers 
April probably
the 1k polling rate in a keyboard is so different than 8k polling rate? you can feel it?
Batch 3 was much better in terms of QC, my unit was perfect
I had the opportunity to grab the second batch ULX but I couldn’t see myself spending $200 on a mouse 
Your wallet feels it more
Money isnt the issue for me its the availability
i swear it vanishes so quickly
Thrn again its easier to justify for me since I went from a G502
That’s a heck of an upgrade sheesh
Yeye
I ended up with a glorious model D 2 pro, I’m very much enjoying the shape
I heard its fast 😳
I’ve no complaints at all, solid build and great clicks
Wheel isn’t good for le bunny hops, but I don’t do KZ or anything like that
As an alternative to the ULX, get a WLmouse Beast X. It's very similar to the ULX and highly regarded
$6,000?????
6.4k for what?
How many keyboards are you buying LOL
whats on july ?
This guy believes in wootings vision so much more than me
Estimated delivery of 80he
80he possible release
I’m gonna venture to guess late August, and be happier if it comes sooner :)
did they already make the batches
I don’t think so no
I'm stocked up on copium
And yes. Color. They’re both double shot PBT
yes im pretty sure
They are still in pre production
Thanks
Any Brandon Sanderson Stormlight Archive enjoyers in the chat 😂
yes i have this widget on my phone’s Home Screen
@molten spindle spec wise ULX still sounds better its just their shipping what makes it still hard
🛒 Get the Wooting 80HE here https://wooting.io/wooting-80he
The Wooting 80HE is a low-latency keyboard for professional gaming athletes and hobbyists seeking the cutting edge without compromising on productivity. It delivers on Wooting’s industry breaking features such as rapid trigger, adjustable actuation point, and analog movement.
➤ Follow ...
Is the sound at 3:10 what I will hear when I get the keyboard?
https://wooting.io/wooting-80he
Scroll down. It is not a guaranteed final sound
Thanks
The ghost looks so snazzy 
You guys helping alot
Final mouse and in stock don’t belong in the same universe
No guarantee but it is a rough idea what it may sound like with L60 v2s and PCR ABS
Thanks
bro i still have a ducky one two mini with blue switches you guys think this 80he is going to be a game changer that once i start using i can never go back
How did it happen for me then haha
Then again no one really wanted the tigers I cant blame them for shaving every gram
For a lack of a better term the stars aligned 😂
The tigers were in stock for like 5 days
Dang that’s the one I woulda bought I got huge mitts lol
So this means that 80he should sound better than 60he, right?
Sameeee
I am 99% sure
8.5” or 22cm from tip to base here lol
Gasket, tighter switch tolerance (v2s) etc
Thank u
guys do you expect the zinc alloy case sound worse than the plastic one?
…no
sorry for out of the blue question lol
Worse probably no, different absolutely
wdym?
not sounding worse but definitely sounding different so its preference
Worse is relative meaning down to end user
of cours that's true, just wondering about the sound profile
I got the zinc fwiw
hope the QC will be good, the boys have close to 12k boards to deliver as for now 😅
It probably sounds thoccccc
I believe both will sound amazing, just ghat zinc may sound more full but slightly metallic? Just my guess, sorta like a xylophone that you dont hear all that well because its super quiet haha
i was wondering if I should use it for my work laptop.
my coworker has his custom keyboard triggering corporate security settings, probably from the firmware
Hard to explain
Ask if wootility/wootility web would be an issue, the mode cey can allow you to switch on board profiles
GuhUH
somebody said something about a free switch pack? how do I get the switch pack?
Walder fainted after he heard the thoccness, so it must be 12/10
Did you get a foundry campaign pack of 90 L45 v2 switches?
idk
the free switch pack got automatically added to my cart
i bought an hour after the preorder opened up
If youre building the board w module, you pick either 60 or 45, the founder pack will be 45 or 60
.
The free switch pack thing went a little wonky, some orders didn't add it, some added 200,000 units, some got the free switch pack in their order then removed everything else and just paid shipping
No option to add the jades?
Cant wait for my 200k unit, can resell them and be millionaire💀
what do I gotta do to get the jades
Pay for them 
yea but then it wont be free
There are units available to allocate to orders in all regions, so it should be presented as an option
You won't get the jades for free
oh okay
Correct the Jades will never be the "free switch pack perk"
im curious, did you guys got taxes from your order? it should be 10% of total price + shipping
We have to sell them at a specific price, as it's not our product
so what do I gotta do to get the lekkers
Depends on country.
is it worth putting film on the lekker v2? i have a 3d printer so i have no problem making them myself doubts are if it's worth it and maybe what filament would be needed?
Country-specific
if i do this it comes with the travel case or only for fully assembled? and get the 2 case offers??
Almost certainly not, whole point of the V2 is to reduce stem wobble
All zinc case purchases comes with a (not shown) travel case 🙂
Mansen speed answering xD
ah alright, hope fedex pays for the import fees I got charged
What country?
im from japan, import should be 7.8% but they charged 10%
China is now tax-inclusive, and shipped as "Delivery Duties Paid" DDP
oh okay, thanks for the reply
I don't think we're collecting tax for Japan?
this is my order
Ah, we're collecting Duties apparently
10%? Goddamn i gotta move where u are
You want the ANSI board yes?
okay so how do i get the free pack]'
There are ANSI, ISO, and JIS
It gets added on the next step after checkout
If you are getting a module, it's a buy one get one free type deal
Buy any 90 pack of switches (including Jades) and get a free 90 pack of either Lekker L45s or L60s
yes, people prefer ANSI because IME (programs to help type jpnese) works well without the redundant JIS specific keys.
losing spacebar real estate is not worth, keycaps are hard to get too.
did i fuck up then cause I already did my order and didnt get it
i didnt choose the option
My budget 75% HE 
Indeed your order didn't qualify for the free founders' perk due to the lack of switch pack included.
Fastest and quickest option is to place a new order that does include a pack of switches and get the bonus, then have us cancel+refund the original order.
If money is tight (or the trust isn't there, no worries if this is the case) then we can either edit the order or first cancel+refund then you place a new order. But order edits will take some time as we have literal thousands of support requests to work through
I much like ANSI too
@nova nexus it shows that i am getting only L45 pack for free.. is it possible to change to L60?
Just bought the wooting 60he and now the 80he is out, should I switch? What are the new things in the 80he other than the size and layout (saw smth about rappysnappy, is it applicable in cs?)
Did you purchase a preassembled 80HE or a module?
@nova nexuspreassembled ghost one
Then your only option is L45 free
nothing changes in the 80he besides 8k polling and ~80% layout.
Yes, and this will be possible to swap via the Wooting Hub at a later time, but probably not yet
After u press continue it adds the option as so just checked
rappy snappy will ship to all pre-existing keyboards as a software update following the 80he's first batch shipping out.
Excuse me I misread your question
founders get their names listed on the website
the founders:
l
The preassembled comes with L60 switches and you get the L45 as perk
Oh ok, thx a lot
Rappy snappy will also be availabke in a later update on older boards
re-read my message 
I take it 60 didn't offer this package cus I can't find it on site
what package
the 60he did have a founders campaign if that is what you are referring to.
founders get website shoutout
Yep, there have been lots of debates here about how people want to abolish JIS for US (ANSI).
60he founders got their name on the product box and a select few got a signature edition pack meaning they got a custom picture under each switch on the pcb
oo ok
all future 60HEs and preassembled 60HE+ have these
they should have offered that for 80 too 
Older 60HE boards will also get it too in a later fw update tho
2pt font on the box
we thought about it but we cant fit 10k people on a box
and the pcb pics are even more limited
We could barely fit the 60HE names on the case. We had more than than ten times the people for the 80HE - in the first 24 hours 😄
yeah I was looking at the difference
@upbeat berry if i add extra PCR case with zinc do i get it still for 10usd and travel case?
crazy stuff for just a year or two
best ask via email where CS staff can answer you
?
in one month the lekker v2 gonna be available alone ?
More like... (late) summer if anything. Around the same time as 80HE preorders will ship.
Is the prebuilt wooting 80 with lekker 60 switches? Or is there a way to change it to 45?
Hmm, so with the free switch pack
so easy to just switch once you get it
Yeah ait thanks
e
By default if you get a prebuilt yes
You get a free set of L45 v2s with the Pre assembled L60 v2 board
Shows up as 0 of your currency
Example $0, 0€, 0¥
Founders campaign
Is zinc alloy worth, or will they come with other metal cases future wise
@upbeat berry Hey, support hasn't answered my email yet. Are they online this weekend
Doubt they'll make different metal cases
we dont work on weekends
if theres other metal cases i doubt theyll just be 100eur
Ty, also, how do I get the 80HE roles? It still has not applied to my account haha
Link your discord to your wooting account
https://hub.wooting.io -> login/create account with order email -> My Account -> Link discord -> refresh rewards
Access and edit your orders, connect your discord, and manage your Wooting account.
I see thanks both 🙂
Hey guys does the Wooting 80HE support these switches by Gateron too? They are dual rail but I think it might not be for Wooting
Gateron 2.0 double rail magnetic switches
no those are ks37b
If I may ask whats different about the KS-37B vs KS-20?
Magnets aren’t the same polarity so you can’t use them in wooting
Makes sense
Proprietary magnets wasn’t on my bingo card card for 2024
Not proprietary. Just... literally inverted.
fucking magnets how do they work
What keycaps u all gonna use for the 80HE?? found mind already🫡
I'm assuming this is a bug, can someone confirm?
If I place this order I won't be getting the free switch package because its buy 1 get 1 free and I didn't buy 1 right?
Like SN vs NS
unless you're getting an extra set of right side modifiers those ain't gonna fit
Correct. You need to add a pack of paid switches.
I am debating GMK redacted on white zinc
I dont think I will be using any if the defult PBTs are PURELY PBT vs a mix of PBT and ABS
80HE doesn't do the cucked rshift/ctrl/alt etc that every other 75 out there stubbornly insists on
We shall see, can always get diff keys if nedded
If they are a cheap mix of PBT and ABS luke the K70 TKL RGB keyboard, I will buy aftermarket durable caps
have a spare set of keycaps as well, just like the Akko caps imo
The set I have has all the variations needed for ANSI/ISO too which helps
ESTIMATED DELIVERY
Early August 2024
is that normal?
Yes.
alr
yeah the rest will fit but the right corner mods won't
Which are those? I need Æ/Ø/Å ones.
looks like iso-uk
mind sharing which one are those?
those won't fit the 80HE though
nooooooo
For those wondering, they are the caps you get on the Akko 5075B plus, unsure if you can buy they separately
on account of half the navcluster keys being the wrong profile and the right-side R0 mods being 1u
as well as the short shift...
eyeball usage is recommended 
short shift as in ISO UK shift?
as in 1.75u right shift
or 3/4 shift on the right?
yeah I said above I have spare keys in the same colour way
which are the right sizing etc.
https://www.youtube.com/watch?v=QvSNO2o1zRc
xda pbt sounds pretty nice
Discover the Impact of Keycaps Profiles on Sound! Join me in this Ultimate Keycaps Profile Sound Comparison video where I explore 10 different keycaps profiles on a single keyboard. We'll dive deep into the differences between DSA, ASA Low, XDA, Cherry, JDA, OEM, ASA, MT3, SAL, and SA keycaps profiles. I've tested 14 keycaps sets, including 5 in...
KAT get bullied

hey
which kat
i wont receive a role yet
KAT profile
link discord on wooting hub
thanks
ohh lol i was thinking about cats
Life saver
Actually are there any profiles like KAT because its kinda hard to find KAT profile stuff
he has a part two
https://youtu.be/129W9M-e9DQ?si=E00zRB9uEdYYNgzH
2024 Ultimate Linear Switches Sound Comparison on the same keyboard! This video is the second part of a two-part series, featuring a compilation of 50 Linear switches sound-tested while typing on the same mechanical keyboard with Cherry, MT3 and SA profiles keycaps! You'll be able to hear back-to-back the sound of each switch for the best sound ...
I'll take market oversaturation for three fiddy
This might be a dumb question, but by ordering the 80HE, you do get a cable with it?
of course
Ait, but the coiled one is something you have to buy seperate
Yep
All questions are fine, yes it comes with a cable tailored for power and polling
Anyone have recommendations for a usb c or 3.0 switch to connect the 80he to two computers?
Poll power?
8k polling and the full power requirement
I meant to type 'pole power'
So hyped
It's founder's perk
No? Came on my order for the black zinc version too
You need to pay for one switch pack to get a switch pack for free. As we already answered them earlier.
o
Oh
Not according to the campaign perk information....
See attached

This
Or do you mean for people that only order the bits separately?
yea well for the module you have to buy a pack to get one, since module does not include switches to begin with
That assumes you either buy the preassembled version - which includes a "paid for" set of L60 preinstalled.
Okay
The module will not give you a free pack, unless you specifically buy a set of switches first. 🙂
Does anyone knowthe spec of this Wooting 80HE USB-C cable?
I know some HE boards are going into 3.0 territory
For example the K70 MAX RGB
jesus
I mean yeah if you throw every extra in there its bound to cost ya 
i gotta have the extras 
😭 cost me $412 including shipping just for the keyboard wish i was in the US
I feel your pain
I spent almost 800 CAD on things I wanted too...
Ppl WHO added thousands of free lecker Packs stonks
i just ordered the wooting uwu, idk if i can get the 80he yet since i havent used the uwu yet
what is the uWu even for xD? (2 Marco keys?)
osu
im sure you could use it for other things but thats what its mainly used for
do the module orders come with the selected switches preinstalled?
They do not.
ok nice, because I selected the l45s and the l60s as the free pack
and I want the l60s first to try
I paid that amount but didnt get a coiled cable or lube set or wrist rest
Just module + zinc case + white keycaps + jades
What currency
Euros
Black
Hiya! When I try to order 80HE from Turkey, I get a "Shipping not available for selected address" error. If I remove the free switch pack from the cart, the problem is resolved. I don't mind not having the extra switches but it seems like a weird problem to have. Anyone else encountered something similar?
Yes the travel case is included but doesent show up dont worry
no issues from my side, maybe its a weight limit thing? packaging?
Are you ordering from Turkey?
to US
It is a country-specific issue I think. The issue doesn't occur if I switch to a different country.
Did anyone get the zinc alloy version of the 80he and if it's worth getting?
it's definitely worth, sound and doesn't move during some gaming sessions
do you have close up of the pure zinc?
doesn't move when you smash alt + f4 with 8k polling rate
Genuinely curious - what do you do with your keyboard during gaming if it moves? 
no I dont I ordered the 60he+ and i was thinking of getting the zinc case for that too
run to catch it
i got the black zinc didn't want to take the risk for pure zinc one
i wish they had more close up images at the ordering page
yea think it would be nice if they also had preview pictures for different color switch and case combos
Hello I am French and for the 80he wooting I wonder if I should take the French iso met which only has ABS keys or take the UK iso with PBT keys
Test
Personal preference
PBT > abs no ?
Do you want keycaps that match what you're typing? Or ones that might feel better to type on?
I think ones that might feel better to type on because I don't really look at my keyboard anymore when I type on it
in that case it shouldnt matter but if you want to be really sure you could always get pbt caps for french iso layout from somewhere else
I thought about it but I'm afraid it won't match with the keyboard, I've already seen people have a problem
if you dont think itll be a problem for your normal usage then UK layout should be fine, it's always possible to get used to it over time also
If I pre-order an 80HE now, is there an option to change my shipping address later?
ok thx last question is the keyboard noise influenced by abs or pbt? because it is not specified which ones are for the test
Sure is
Oh good, now I don't have to worry about being in another country, thanks!
Hold up. A different ADDRESS and a different COUNTRY are two very different things 😄
We cannot guarantee that a country change will be possible. Requires a complete do over of shipping and tax calculations.
mansen can you rep at my ask plz
Not my area of expertise.
ok thx
General consensus is that PBT keycaps are a bit thockier, while ABS a bit clackier, because PBTs are more dense - hence why ceramic keycaps sound way thockier than PBT or ABS - but the difference is typically really small, and heavily depends on individual keycaps too
I believe PBT keycaps were used in sound test
thank you very much because I find the sound very good
i will take PBT
ABS is only available with ISO layouts
you can always go no keycaps and buy ur own
I thought about it but I'm afraid it won't match with the keyboard, I've already seen people have a problem
Cals what did you choose for your 80he?
Still trying to pick between translucent white, translucent smoky and zinc white 
I like how translucent white looks, I found nice keycaps which will match perfectly with smoky case, but white zinc looks so clean...
id go zinc personally
jp marketplace is wild, people selling used 60HE for more than I paid for the 80HE with shipping and taxes
If there was white PCR I'd go for it immediately 
zinc alloy all the way
heres my order
Buy raw zinc and cerakote it
I asked local ASG shop if they're up to cerakoting keyboard case, but I didn't get response yet 
I thought my wifes leobog hi75 was heavy. The Zinc is almost twice as heavy. Can be used as a home defense melee weapon
Where. If price is good enough i might do it
the measurement for how good a case is is how high itd have to drop on an invaders head to work as a siege defense weapon
Well my aluminium tkl is around 2.5kg
they need to start making tungsten cases
I dont think so tungsten is ok for keyboards
with this i get the offer to the 2 cases right or is a bug?
But steel case with brass weight
Day one delivery!
Well if you want 2 cases. You can buy it
you get two
i say bcs i think u can only get 1 case with the offer with order of the module 80he
oyea
so wanna confirm bcs i order a fully assemble zinc white but also want the smokey black case for 10€
i think youll get 2
im gonna wait for them to response for be 100% secure xd
you can wait long its the weekend. however I think its fine
day 38. we have run out of food it seems that jonny is exhausted and I fear the worst if someone reads this it is the year 2051 after the drought of sector 78....
This will be shipped out from EU right?
depends on your location
For most of the world it is EU warehouse, yes
I just asked out of curiosity, if I was going with zinc, I'd most likely go with white regardless
the only correct choice
Ah ok, I looked up and seems like for jp it is usually shipped from Germany.
That explains the 30 usd converted shipping.
How? Do you have weights in it?
Oh fair enough, thanks for the heads-up!
zinc all white bby
Ok so I just wanna see something, if it's possible.
I'm an unironic user of ALT codes on the numpad, and I'm wondering if there's a way to make that work on the numbers on the 80? Pretty sure it won't work out of the gate since numpad and numbers are different, but is there a simple way to make it work like such so I can type numbers, use shift for the symbols, and use alt for some special characters?
I thought about making alt a function layer but I'm unsure if I can make it both activate alt and the function layer at the same time to make alt codes possible by hiding numpad numbers on top of the normal ones, only brought in once alt is pressed.
It seems pretty complicated, but if that's possible, it should be pretty good.
In what country 80he is produced?
Is the 8k polling compatible with an usb 3.0 kvm switch?
Highly depends on KVM switch model
If it provides enough power, any 2.0+ hub/kvm switch should do
Ok nice thx
not possible but what you should really do is just create a layout with the special characters you want on an altgr layer https://www.microsoft.com/en-us/download/details.aspx?id=102134&irgwc=1
china
Designed in Netherlands, manufactured in China 🙂
pre-ordered a black zinc version, wrist rest and stealth cable day 1 of the campaign. cant wait till late july!! lol
bro went all out
What the...
I just realised that the 80HE doesn't have the delete key but it has PAUSE?!?!
Me too brother
You can swap em out
Well you have keycaps in box so changing them id easy
Actually nvm. I think I was looking at an earlier render because on the website I see the delete key.
just don't make any typing mistakes 
For me yes. Never ever used the pause key.
Again - You get the keycaps to swap everything around. 🙂
Does the zinc prebuilt come with the full ANSI shinethrough PBT keycap set so I can swap them?
Alright thanks.
If you pick ANSI, yes.
@buoyant solstice are you Danish?
Yeah my order was the prebuilt black zinc alloy in ANSI
fuck i picked ghost but now im kinda feel like im missing out without going zinc
might have to upgrade
u can cancel it
Youre not missing out, but you can absolutely switch
yeah cause im have a 60he+ prebuilt with the plastic case and i cant justify upgrading to an alumaze when i will definitely be using the 80 when it arrives
i'm looking at the del key on 80he right now
Wait was the inquiry regarding a non ansi layout
ah you're eu
The typical tkl keys will be included in the box anyways so you can switch them out afaik
You can easily change any key to whatever you want
Wootility software is very good for that 🙂
Once you get your Wooting you will wonder why you ever used any other keyboard
Full TKL set included 
But default ANSI looks perfect imo I couldnt ask for anything better given 77.5%
i wish we had better picures of the Raw zinc color
I luke how its ghe wooting logo instead of windows, because what if I stop using windows
I don't think the final design/finishes are even fully done yet
i just bought a 60HE now im having second thoughts about getting an 80HE lol
Hence there is no real picture of it
Easy solution, just buy both
^ KEKW ill have both as well
haha, wish i could afford that
i love my 60he, but no fn, arrow keys kill me
mod tap
you have no arrow keys on your 60he?
use that already, prefer dedicated
You could get an 80HE or a Two HE
mod tap is very easy to use lol
Mod tap is nice
the "/" alt, menu and ctrl line up pretty well if i do say so myself
Was watching 60HE reviews yesterday gushing about wooting
bro i got a 60 like 2 weeks ago got the packaging with the post card and everything and fell in love with wooting as a brand
Seriously these guys are crazy awesome
i can't go back to regular kebs now
I honestly don't even use arrow keys that much to even worry about it
I use them... for sure, but like
I'm not overusing arrow keys ever
I’ve known of this company for years but didn’t bother to get a keyboard until July last year 
quality product seems like cool people working on the product im in 😄
This is my first time going custom so its all new to me
I was waiting for Hall effect to become custom
The niche was so cool I had to wait and it paid off
Well Wooting isn't custom
They just have custom options
Other companies limit you to the same case
Like the Two HE I guess
again, I feel like I need to get the premium option on the 80 since I only have the plastic case on my 60
Well they can be depending on how custom you want them to be
I’m at least glad that wooting doesn’t void your warranty by just opening it up lol
Well in terms of selling the modules separately that is only a very recent thing from Wooting
You get a free carrying case with zinc
Well, if you factor in keyboard design and switch feel/sound then there's a lot of nice kits out there. But in a gaming sense, I wouldn't touch MX switches ever again - no contest
They have been going for years before that just selling the keyboards, but with options to go custom
how soon can i expect an email back from wooting?
Im going from speed silvers
couple days mate
Speed silvers were so nice as mechanicals
I haven't used MX for like... 5 years+ 
I'm coming from mx browns
I'm coming from MX Blues 
You really haven't tried many switches other than MX have you 😅
For work I prefer MX as I grit my teeth and type heavyily
I use kailh creams on my work keyboard
I remember using those
It was fun but it was abhorent for geometry dash and precision games
Clickies are a bannable offence here
Whats a wooting member
I’m coming from romer g’s 
owner of 60HE
whoever was asking about what case was used for the sound test it says it PCR was used
Owner of Wooting keyboard 
I remember using those too

I still like the board, good memories of it haha
nwn
Was the g810
G910, G810, G Pro original
nice
I was sidegrading so much
A true PC gamer with an ifixit screwdriver
Then I got the Pro X mechanical but the delay was so bad
I had the g810 until it double typing like crazy and volume slider stopped working kinda then I gave up and ordered a 2he
I'll give that a try, thank you!
Not before trying the apex pro tho which was miserable 

And then here I am with a Corsair K70 TKL RGB speed silver because clearance for 100 CAD and was a super fast board
Sounds like a nice upgrade going to 80he
Wooting is night and day difference to your Corsair, you'll enjoy the upgrade 
You won't ever want to use your Corsair again, I promise
yesh especially the online configurator really sold me, not planning on buying a keyboard without this feature again lol
coming from a ducky one 3 sf (got it as a gift :P)
80HE is endgame
Until the 80HE+++ Super
Ultra
And knuckles
Anyways time to forget that I ordered this board until it shows up on my doorstep
Good luck, you'll be staring at the Wooting site in July and comign here asking why it hasn't moved

I siw total click latency for the corsair at 4k scan 8k poll was the same as a 60HE Tachyon (1k scan/poll), about 1-1.5ms~
My current keyboard is the Logitech K860. Only downgrade with the Wooting will be the comfort.
Yea I’m coping I checked the hub pretty much daily when I ordered the 2he
Finally, something to keep track of my respawn timer
Btw are we still expecting some knob announcement or is that idea scraped?
In terms of features like the software though, the rapid triggers, the mod taps, the DKS
It's non comparable
click latency means nothing
Yes there is a knob in the works , which is a separate project but beyond this I have no clue
Firmware and PCB too
They did an amazing job
What are the knobs for? Are they volume knobs?
Corsair and co just sell overpriced garbage to the general public and 90% of people gobble it up
Not sure I don’t believe they’ve said anything specific about it yet
They be whatever you want if you believe
In reality they are low quality products
True, I just needed a board because my old one was way worse and it was on clearance
Don't worry we have all been there, I've had a corsair keyboard in the past 
A long time ago, would never buy one now
Will the knob attach to the initial iteration of the 80he or will it require a whole new case
Yeah that's what I am curious about, like how would the add on be added in the future.
The fact it is not hotswap is poo tho
I busted my up arrow
Because I used it too much and I dont know how to solder
its just 3 days and i cant hold my patience to get my 80HE in August 😦
Had 3 Corsair keebs never again xD
It takes the spot of a keycap I do believe
Soldering is easy but desoldering sucks without a desolder gun, which are very expensive. But if you're only replacing a few switches a pump will do the job fine
Im desoldering a switch
Because corsair dumb
No hotswap in 2022 why

All that changes with the 80HE
Well logitech without HE keeb. Weird
not weird
They havent been doing anything with keyboards, just rehashing
Oh yeah. They do not care
Ive been a logitech shill for so much of my teenage years its sad
why is being a logitech shill sad
they're a great company who stand behind their products - logitech peripherals are top tier quality
because they're not innovating? wooting is already doing that - they can have their own market but I'm sure they will eventually roll this way also
i can't imagine wooting replacing a keyboard or mouse after 10 years of use
Nothings more funny to me than finalmeme
Well last good logitech mouse was logitech g502 lightspeed
Hello quick question dose Wooting allow monthly payments cant find anything on it
I enjoy my SE 303, if you have the right hand size, its a claw grippers wet dream
Thing is heaven sent
nope.
They don't offer any financing.
I have weird mix of claw and palm due to my disability
OOf okay thanks
What mouse is comfortable that plays well with the disability ?
G502
With all weights
@obtuse wagon everything depends on disability
In my case g502 os perfect in other would be small mouse like gps
I had to return g502x because it is much worse
I be buying too many peripherals
I be buying until i can buy no longer
i've bought 5 mousepads so far this year and 3 mice
Well if you enter custom keyboards.. you cant exit. It is like crack
i've semi dipped my toes in but I do plan on getting a mode sonnet at some point
Ive thankfully held off on mice, my basilisk is doing well
Audios where im looking at atm, probably wireless
i've been meaning to pick up new audio gear for a minute
Guys what is your batch
EU-Kampioen
NA Champion
Late june or early August?
Went from my 7 year old G502 Hero to my ULX Tiger Batch 3 (perfect unit)
EU-Kampioen
really?
any flex/creaking?
like at all?
Nah its perfect
wow
Have they added the 8k polling yet with its current dongle
cause if 8k doesnt work with the provided dongle i'd think its a little overpriced with other mice like it out now
After getting the prebuilt with alloy I’m already looking for how I can better improve it. Any suggestions. So far all I can think of are keycaps and even then idk how to look for compatible ones.
what would push people towards the zinc? im heavily considering it for the premium feel but ghost also looks really cool and itd be $150aud cheaper 😭
I went with ghost too since I’m a sucker for translucent tech hehehh
Almost went raw zinc
im thinking it'd look so dope but dont wanna miss out on anything when im already paying a premium
FWIW my plastic 60HE is built like a tank and very solid
When looking for keycaps, what should I check for to make sure all keys are covered. I don’t wan to accidentally have missing keys…
Just get a full set lol
ahh i have a ducky 1 2 sf rn and it creaks like a mf so im weary of plastics lmao
(TKL is fine too)
Yeah I mean ducks do quack 
most "base sets" have all the keys you need lol
Thanks, just getting into keyboards and stuff, sorry for the seemingly basic questions
check KBDfans they are reliable and got a pretty nice selection
There is no such thing as a stupid question, welcome!
hi thinking getting 2 80he but does it only give 1 set of swtich pack?
If you’re in the founder campaign you’ll get two sets for the price of one with the module, or 60v2’s installed and a loose kit of 45v2’s with the pre assemble
If you mean the freebie you need to place seperate orders or contact support.
Anyone here who own a wooting one TKL
Just be careful—you’ll soon have far too many keyboards to know what to do with 😂
The slope be slippery
I had chance to buy used
I have 6 keyboards and the 80HE’ll be my 7th lmao
You are in the same boat lol
I’d say get the HE stuff, the adjustable actuation point and rapid trigger are game changers, literally.
@low token Do you know if if 80he will be different ?
Soooo much more responsive
In what matter
Less wobble and any form of tkl is all i needed and im satisfied
The response the switch ?
Do you have 60he ?
Yes
Wellll the 80HE will be more responsive than the 60HE due to the 8k polling, but diminishing returns for sure.
Lekkers switches, rspid trigger more stuff etc
Rappy snappy :)
LED BAR
60HE is still the most responsive keyboard I’ve touched to date, by far
One had only analog mode and actuation point change option
I’m already thinking of switching to l45 from pre installed l60
Led bar my love, he shall be orange
Same
60HE will get rappy snappy in a software update
And I feel one keys compared to apex pro tkl extremely slow
I know, just a funny thing
Such a good name 😂
The new keyboard will be good for Val and CS Go and not COD ?
Itll be good for gaming in general
Anything you play, casual or competitive its a solid board
i would say the best keyboard technically
Only fitting that the best board (60HE) will get dethroned by another wooting lol
I did not gain much from a used wooting one tkl compared to Apex pro tkl 2023
Well yes
Ok so no I’ll have to disagree. Technically they’re not the same due to the daughter board and 8K polling, but realistically, yes I agree that they’ll perform identically yes.
On a technical level they’re different beasts, but it’s splitting hairs 100% lol
I know im not gonna use 8k personally, 1ks more than enough for me at least
@fallen epochme too
Yep. Considering all my gaming is online netcode is by far a way bigger factor.
i am not sure that it will not affect the perfomance of the games
Remember, this is true 8K polling vs any 8K polling
like a mouse with 8k polling do
Mouse doesn't have true 8K polling?
I’d love to see people blind testing 1k vs 8k and see if even pros can tell the difference lol
but we will see 🙂 need to test anyway 🙂
8ks nice, but the switches are more something i look at
Lekkers made previous boards so obsolete to me 
I made my Apex Pro TKL 2023 wireless Thocc
@frank mist 🙂
How ?
Can you make the arrow keys Omni point ?
Krytox lube on the side of the switches with Ducky douleshot PBT Keycaps.
Spacebar is challenging, still working on it.
Arrow keys? nope
I lubed the heck out of the switches
That’s the only thing I hate about this keyboard
The wireless one sounds so much better than the regular apex pros.
You can actually Thock the wireless
No idea. But I am excited to get the 80he in ghost form
Ghost with grey/black keys for me
Just ordered, rly hope that "early august" is correct. TKL would been great, but prob 80% it's just fine. First keyboard ever without numpad and I use numpad a lot so lets see...
buy a seperate numpad
always a chance but equally a chance it comes after august 
Absolutely not
no lol
Def not may/june
Thanks..
The hubs usually pretty accurate so id trust whatever it says
So unless you’re a top 1% Chad gamer, it makes little to no perceived difference
😆
and minimal impact on performance
I am a top 1% but im scared i wont feel it ngl 
Feel like my other peripherals aint it- like my monitor
Yeah you're definitely not feeling a change from 1k to 8k, if you bought the board for that reason I feel you will be disappointed
I bought it cuz i been using some random pre-built pseudo custom keyboard but it has really bad response times
Even my shitty razer keyboard from like 2015 had better response times
whats better pbt or abs?
The rapid trigger along with the rappy snappy is 100% going to make a difference
Yeah I mean it's going to be better than that but over the already existing 60he it's not going to be noticeable
For sure pbt
Im not sure how rappy snappy will feel, but after testing the 60he at a friends place, it honestly makes a world’s difference for valorant when you have to come to a full stop to shoot
Preference really I personally prefer abs for higher quality legends and better variety of colour options you can't get with PBT
Although PBT are more durable
all black NPC keyboard enjoyer
gotta go with pbt lollllll
bought my first wooting after years because finally my favourite layout, just shame gotta wait so long
Any chance for Mac specific F Key caps?
Plenty of third party options for mac
Only ones I can think of is from Keychon.
Mac 
bro get a real pc
Bro needs rapid trigger for iMovie 
Why roasting people with the same excitement and interest as ourselves. Let the homie get the wooting for his mac
I guess you right, not too many options for f-row
i found this one that has media keycaps https://drop.com/buy/drop-biip-mt3-extended-custom-keycap-set?defaultSelectionIds=969821
In case you're all wondering, I use both Mac and PC.
F Specific keys, would do well with a USB switcher.
actually Nuphy has them too https://nuphy.com/collections/keycaps/products/gem-msa?_pos=4&_fid=82905094e&_ss=c
NuPhy’s first high-profile double-shot PBT keycap set is ready, with small tweaks like SA height adjustment for ergonomics, larger round surface, and symmetric design inspired by nSA. Notably, the light emitting homing bars, illuminated by south-facing LEDs, provide subtle guidance without distractive.
Between work and gaming time.
not cherry profile though
This might be it!
Looks like it might go well with blank zinc case.
yeah they're not bad I have Nuphy board they're decent quality keycaps for the price
Only thing is that i hear the Wooting keycaps let light through the actual letters?
they have two different sets one's shine through and the other is not
Nuphy also has a shine through set if that's what you're after
Just ordering zinc alloy case is it entitled for free carrying case and L60/L45 switches?
yeah you get carrying case with zinc but for free switches you need to order a set with it to get a free set in addition
Got it! Thanks
What do you think guys will the Raptor HE Gaming Switches work on 80he?
Yes i think so
dam about to pass $4 mil and still batch 1 is open? that's crazy big
man what's the batch size then? gotta be 15-20k at least
i think thing that makes it tricky to guess is we don't know how many orders are bulk/3+ keyboards that got sent to batch 2
Can’t wait to see my new baby 🤧
Looks like everyone and their mom is gonna have an 80HE
hell ye
all of japan it seems. If you look on twitter for 80HE and sort by latest posts it's filled with entire japanese community buying wootings lol
something I noticed on the wooting 60HE+, especially board v1.1.6 (tokaku's unit) the spacebar has I think 5 leds. does the 80 HE have something similar to that?
Waiting
do we know if the coiled cables will be enough for the 80HE PCB at 100% brightness?
yes it will be
if you use the original cables of Wooting then you should not have any problems
Just checking because I bought the wooting stealth cable so ye
Ok so about my question asking about the 60HE PCB vs the 80HE PCB, its very small but I would still like to know since I like using the backwards spacebar method for ergonomics
Tokaku did a review on the 60HE ANSI, and my friend and I noticed that the spacebar alone had 5 LEDs on that model. Does the 80HE ANSI have 5 LEDs under the space key too? Its not a huge deal but it does aid with backlight/lighting uniformity throughout the key.
Image 1 and 2 is the normal spacebar
Image 3 and 4 is the backwards spacebar
80he has 5 leds iirc
https://wooting-website.ams3.cdn.digitaloceanspaces.com/612ca8920bc3a648125ffac3/65eb385fe1440d501db0dc1e_MMMMMODUILE.png Here's a picture from Wootings page, JIS
btw that backwards spacebar looks so bad
erm, 2?
Thats the JIS layout
ah i cant count
I dont think the ANSI layout is finalized for the board for online images
Not sure if this is a finalized version
yea i was right it has 5 leds
Something like this but ANSI
The Nordic have 5 and the Ansi seem to be missing them but will probably have them too
Probably an oversight for the preview
The reason I use the backwards spacebar is because it digs into my thumb
And the LEDs help with the backlight uniformity
Ok you can check the pics in the Configurator, even the JIS seem to have a few things that could be fixed
Hopefully
howdy
u dont like zinc alloy case?
Loved that but it was beyond my budget so I ordered normal 80he
Do u know how much the 80he zinc alloy weighs?
I ordered that
about 2kg
relatable
Wow 4x my huntsman mini it will be nice
now im just worried that my keyboard arrives safely and in working condition
Saw some feedback posts on 60HE .. people get weird issues
nah you will be fine, i was also like that when i ordered my 60he
So how was the experience? The packaging ? Unboxing exp ?
very good, u dont have to worry about packaging
yeah man .. I wish they launch when they got the stock .. I really don’t get the logic of it that they launch and they dont have any stock yet
almost 13000 people ordered it
they need budget to make keyboards
True true
4 million dollars is pretty nice number
Nice.? Its huge
i'm not tripping, the l60 switches come with he h80 right? And u get the l45s for free
Best place for custom keycaps compatible for the 60HE?
yes, with L60 v2
if you ordered prebuilt then yes
yeah i did, ok thanks
are you not able to buy the 80HE with L45 switches included?
you get them as a free addon
don't ask in multiple channels
Skibidi sigma
if you buy the module u can select what type of switches u want iirc, but yeah with the prebuilt you get the L60 switches and the L45 for free
Is it okay for me to open up my woothing 80he despite it coming preassembled?

Do i need some special screw drivers? Or are some wera screw drivers okay?
P1 most likely
So long as it fits and it doesnt damage anything other than that it shld work
will it be ok to swap switches without taking the whole board apart?
Yes
Just get a switch puller and a keycap puller
and that comes with the board?
Comes with both in one.
Really? Isnt it a double sided tool
oh wow NICE!

is it only working with cabel or its wireless too ?
not wireless.
Hello guys, i order my Wooting 60he + few weeks before and he was no stock. But now he is on stock and i dont have any date or informations for my delivery



