#🕒│waiting_room
1 messages · Page 12 of 1
why does it take 17h of transit?? and why theres two "in transit" status???
This channel has made me realize how impatient people are, You can’t change when it gets there. It’s out of your control. Stalking shipping and shit is going to change nothing, what’s the point other then added stress?
👆
Place order
Check what batch and it's estimate
Keep it in the back of your mind
Go about your life until a week or so before the batch should arrive :D
bro idk xD
maybe some have seen this recently for his wooto wooting
Probably because attempting to communicate with a company like DPD (or any other parcel carrier) is like screaming at a brick wall
This is normal. There are lots of steps between our warehouse and your front door, lots of moving parts, and it takes several days to work though all of them.
Just keep an eye on whether or not you're being asked to pay import duties and it'll all be fine 🙂
(If you might owe import duties, we emailed you about that at the time of purchase)
I must have had their lucky fluke delivery run twice when I was expecting deliveries, they got it past like 3 countries in less than 2 days
ok thank! (i was wondering why there is two deliveries 😅 )
i have them too cant wait
mine is arriving monday DHL was too lazy to deliver it today in germany haha
Finally done
Probably the normal way of doing it
but most of us just check wooting hub like insane keyboard deprived people

I did that for my Steam Deck...xd
All mods are completed, I can finally use the wooting 
that looks so nice
bro got the neon genesis evangelion combo ong
This is nuts to me, but they're gonna show dirty quicker I guess
In response to the popularity poll thingy
Aswell
i have really sweaty hands so they might get dirty even quicker
but surely it ll be fine 
Should be good, think I might case swap it when it gets here with the white caps
Get a Tofu60 or something like it
Any dark-colored pbt
Light ones and white need to be cleaned much more often
kinda surprised how resilient my white prismcaps have been to a lot of visible dirt and grime, you'd have to inspect rather closely
black ones will show specs of dust and such easier though instead
yea white are pretty hard to get reallyy dirty actually
my white ducky has been going solid for years and you can barley tell, especially if sometimes you just iso bath your keycaps
for a lil
What does HE stand for in wooting keyboards? 🤔
Hall Effect.

fr akaza fan
What keycaps are they

mine as well it goes up by one or 2 days every day
AT least yours didn't change batch because of the dam case :^ ) IF I knew that would happen, I wouldn't have bought the case...
Was in NA-Pants
not my fault u dont live in the netherlands
mine did change batches to april even worse bro
uhhh
How long does it usually take for the import duties thing? My parcels been in transit for 3 days so should I be concerned?
Where to?
Scotland
Pretty sure Scotland is still (as of time of writing) considered part of the UK for better or worse. I imagine you'll see an update tomorrow or tuesday most likely.
Fantastic thank you
I live in England. Got an email the day after it was dispatched saying I needed to pay import duties. Check your email.
Mine just says in transit right now, has for a few days, no new emails or anything I figured I’d have to pay import duties when it’s actually in the UK
Still in the Netherlands I believe place called Oirshot or something
Mine was still in the Netherlands when DPD sent me an email to pay the fees.
Interesting I’ve got no emails so far
It was dispatched Wednesday and I got that email on Thursday
Oh no
How do I pay the import stuff without an email
Idk how any of this works just want my keyboard fr
Have you had any emails from DPD at all?
None
DPD (all couriers in fact) sends you an email and a text message usually. And there should be a link to pay with the tracking code email you received as well.
Then it seems they don't have your contact details.
Click that big yellow button.
Now you wait.
Ok ok so I just keep waiting til they send the link to pay
It was only dispatched Thursday and I don't know if much will happen over the weekend.
Okay okay
I’ve had trouble with dpd in the past so
My heart kind of dropped for a second
But thank you guys for help
prepare to be shafted for 35 quid
35 for me
Ok that’s even better
I didn't buy extras though
VAT and handling fees are typically around 30-40 something quid for just the keyboard.
I went w air freight and the pbt keycaps
same
Okay okay that’s fine then
That is for all intents and purposes "just the keyboard"
Yeah I didn’t get a travel case or anything so we’re chilling
Bit of yes and bit of no. Depends on where the package is in their massive sorting system. But it's not something to be worried about.
As an aussie, Thomas Baart & Leah are the first people I know that come to mind :^)
NL is just really good for keyboards methinks
does anyone know how long it normally takes for it to get shipped since its been on being packed for a bit now
How do you pay? I hope they give you a link where to pay and all that right? And how much? I also ordered my Two HE a couple days ago and I also got the email about the UK import tax
They just you an email with a link to pay
Yes - Once the package ships and arrives at UK customs, the courier sends you information on how to pay the customs.
Lot of packages to go through all at once - It takes a few business days to ship them all out 🙂
Gotcha, thank you
How much did you have to pay?
35 pounds
hm not too bad
It's basically the 20% VAT you didn't pay on checkout plus a fee to the courier of... 10-12 pounds I think? DPD and UPS charge slightly differently.
Yeah I was confused, since it looked like I'd pay ~220 since I also added the wrist rest but my total was 185 in the cart
Correct me if I am wrong, Two HE and 60HE have the same functionality and specs, except Two HE is just a full sized version?
Yep. 2HE is a fraction of a second longer in terms of latency due to having more keys. But otherwise the same tech.
fraction of a millisecond more like
if im in the NA batch does my keyboard get ship to the LA warehouse first?
ooh fraction of a fraction, how fun :)
case looks good but the caps and cable dont really fit
I agree on the cable. I'll be getting a white one. I like black caps with a white case though.
yeah black caps look nice. maybe i just dont like the stock ones
Sounds like it's time to spend another hundred bucks ey?
60 if you are lucky😂
Yeah I tend to agree with late. Nothing wrong with the default wooting keycaps but they just look a bit too gamery for me
keycaps are what I'd describe as "generic"
And I think non shinethrough looks nicer personally
cable is weird tho
a fully black braided cable with the wooting would be nicer than the black and yellow in my opinion
I guess at least this is distinctive / trying something new and just uses standard USB-C
I'll probably just use my keychron cable, no biggie. As implied I'm not a huge fan of the warning sign cable but I don't mind its inclusion for the aforementioned reason
honestly it's been great marketing for wooting - that cable is so visible when pros use it at events
can spot the wooting from a mile away with the cable
I wish we could order custom straps
Or at least different colors
you can
not from wooting tho 
you could always commission something from someone
lmao it went from netherlands to germany to china to singapore for me and finally coming
HOPEFULLY TOMORROW MAN
what the case?
Anyone seen a build with the maze 64?
Tofu60
got a notification 10 mins ago, its in perth apparently (where i am)
Nice
Mine says ready to pack but the delivery date estimate keeps moving forward more and more every day. When will it actually start coming? I already put shipping info and confirmed.
it's the middle of the night on a weekend, nothing is being done at the moment. the keyboards in a patch are sent out at around the same time, so you can expect to have it moving in the next couple of days
it was since last tuesday
the expected delivery date then was the 26th of feb
it might be that they are still packing everything for everyone and then sending all of them out at the same time
or if you're worried that something got stuck, you can email them or open a support ticket here
Alright thanks
link discord through the website
like wednA said link the website but if you bought it through a third party I dont think you can get the role
going through customs is normal
yeah
F
Bro it says i have to wait 24 hours to claim a loss of item, then it takes an average of 10 days for the claim to be processed after
A kind reminder to folks asking for support in this and other channels.
Please make a thread over in #1019755933959733258 , otherwise your requests are likely to get lost in the discussion stream.
It came, here it is 
i love that "<3" on the box
My order is in transit omg
looks dope
when did u order yours?
damn
no reason
i’m just gonna have to wait a fatass minute
days feel like years waiting this keyboard
💀
ordered in january 😄
Testing wooting rn and I need to stop counter strafing
rapid trigger feels so weird xD
youre so lucky
im broek and mine isnt even in uk yet i dont think
DHL didn't update me for week and then it's just at my doorstep
I thought it got lost or something
Just arrived!! (nvm de_dust)
Is that a single keycap set or a mix? Those swirly yellow caps are crazy
Yeah that's fair - It does stand out a bit now that you mention it. Great on its own, but it does look a little off 😄
agreed, the swirls are awesome and the color scheme too, but I guess the spacebar and maybe the font makes it a bit too busy for me
It's a pain to get PT -PT keycaps
I love the modifier keys but man that font on the core keycaps would drive me nuts 😂
how long after the order being packed does it take to get a tracking number usually?
Should happen today or tomorrow if all goes well. It's an issue of throughput mostly.
When hundreds of orders are all ready to go out all at once, it kind of puts pressure on the couriers coming to pick them all up. So it might take several days worth of pickups to get everyone out the door.

sick
Man I love pot plastic
I’m a bit concerned with all these dpd issues people have had in the past very worried
dpd?
Yuuup
Yeaaaaa
Actually terrified it won’t come and I’ll have to wait like a month longer
Bc it’s a lot of money yk
Are you broek?
Some people from broek already have theirs
I wish I went with the other delivery guys fr idk who else I could’ve picked but damn
I think postNL and UPS were the other options -- at least for my international order.
To be fair it's only been 2 business days and it's the slowest shipping option, I wouldn't sweat yet
I’ve been waiting 4 days to pay the import stuff
Im broek and chose Ups for fastest shipping and its stuck at origin scan in netherlands :/
I’m telling myself I’m just being impatient but if u look up dpd in support u can already see every batch with them has the same issue
Fr
Air freight too?
Yeah, everything fastest. Waited enough already.
💀 they even got a snail icon
I guess this is for saying Germans got no sense of humour...
Hahahahah
Patience please. Worst case it was never picked up by the courier, and we can locate it at the warehouse and resolve it 😀
how do u guys check the name of your batch
I know mine said it before but now that it’s dispatched I cant find the name, and I forgot if mine is broek
On our website. 🙂
Create an account and log in to see all of your orders.
I know that I do see the order, just doesn’t say broek or whatever on it now that it’s in transit
Really? That's curious. I can check if you give me your order number.
sure thing, I DMd u
maybe im just blind
Broek. 🙂
Hey is it possible if you can give me my batch? I completely forgot it honestly haha would like to know
Your order confirmation email has the order number that you can input here to find your batch:
https://next.wooting.io/product-status
Or log into the Wooting Hub to see your orders:
https://hub.wooting.io/login
Gotcha appreciate it, got to see it right away thanks again 🙂
is the tofu v2 compatible with the 60he?
Nope, USB hole is in the wrong spot
Look for the USB. It is centered like this, then it's a no.
If the USB is on the left side, it's the Tofu "1", which is the one that shares the 60% standard with us and others.
Tofu 60 V1 SPECS PCB:DZ60RGB v2,QMK Firmware. Case: CNC manufacturing, Anodizing Plate:Polycarbonate/Brass/Aluminum,CNC manufacturing Stabilizers:Cherry screw-in stabilizers Optional accessories KBDfans handmade custom mechanical keyboard Type-C Cable: Link If you need us to assemble it for you, Please add this link to
this is the confusing bit
its the tofu case, named v2 but its not the tofu 2.0
because why have a good naming scheme
i mean better than the tofu thing
A little 😂
wait is that what he stands for??? i thought it was Horny Effect
no its Hero Edition
no its ham eater
isnt the v2 just dz60 v2
bio said tofu v1
this kind of layout makes no sense to me
tofu 2.0 is gasket mount
well even if it wasnt the usb port is in the wrong spot
yeah
hi, I have a wooting one and want to buy new switches
but can't seem to find them on the online store anymore
if someone can facilitate somewhere to buy it'd be great
No longer possible I'm afraid. Adomax who made the switches stopped years ago.
We have a tiny emergency supply for repairs on a case by case basis - But not enough to offer a keyboard's worth by any means.
If they asked for one switch at a time. multiple case basis
damn, does the keyboard fit any other type of switch?
its hot swappable
As long as you can get switches that work with Hall Effect, yes.
Wrong keyboard. They're talking about the old flaretechs, not HEs.
Ah my bad, didn't notice the other comment
Also found you on an oddheader video by chance lol

Lesssgoooooo 
Hello, does anyone know if Wooting can sell the French ISO layout of PBT keycaps separatly ?
They seem to be available when buying the wooting 60he but not separatly ☹️
We don't even offer that product. Separately or otherwise.
We only have French AZERTY in ABS.
Oh damn, that's my bad, thank you for answering !
Any French ISO PBT planned to release then ? 😄
Not that I'm aware of. It is crazy expensive to have new PBT molds made, and I assume there isn't enough of an expected market to return on that investment.
Your best bet is looking at something like Corsair's PBT keycaps for french specifically.
All righty, thank you very much ! 👏
I got my wooting yesterday I've been very happy with it. 

It just came in !
@simple jackal bro i ordered in january still waiting 😄
iam so glad i didnt going inside custom keyboard factory
Mine is about to arrive but im not home 😭😭
Prolly need to pick it up at the post office tmrw
do you have any pakstations to send it to?
Theres no option for that for some reason 🤷♂️
they left mine in my porch cause
i was sleeping nicely
i put my ducky spacebar on it
looks so good
Ducky?
yes
i have the one 2 mini spacebar
but idk if i want to use it cause it kinda breaks the pudding keycap thing
@dusky magnet deadly combo
which year u got
Im gonna use my white ducky one 2 keycaps also with my black wooting keycaps
@dusky magnet in my valorant dms everyone using this combo i guess getting destorying 😄
I'm going to destroy lobbys

@dusky magnet 🥲
What is that mouse?
atleast i bought wooting tho :D. I will going to buy artisan zero soft but not in stock
mz1 wireless
10 dolar keyboard btw
Just changed from the x super light

you could try LGG Saturn/Saturn Pro, it's similar to zero
though Saturn Pro feels more like xsoft zero I Guess
@kind oriole what do you prefer soft or xsoft for saturn pro
and also they going to ship in june sadly
😦
but i will buy prob
they only have one model for Pro, which feels like artizan zero xsoft :D
oh right, they're out of stock too
tough luck
ooh okay, got mine last year so didn't know
What about skypad?
never tried it
For me it's better :)) not for everyone tho. I got instantly better so i am keeping it! I just love it, it's perfect
@little haven saturn pro or artisan zero
How big are your hands?
the saturn pro red version saying buy meeeeee
Cause i got small hands maybe its better for someone with big hands
I like control pads more, but tbh Saturn Pro is still a lot faster than for example my super mangy and old pads like G640, Qck+ and Qck heavy
(ptfe feet, superlight)
small :))
just go to rocket jump ninja on yt
and find what muse is best for u :DD
he has a good website as well
to find the perfect
its all about shape for mouse
Got it
More space for your mouse
I had the problem that i have the keyboard right in front of me and my mouse more to the right and the big keyboard annoyed me always
@little haven bro always hit my mouse on my shitty keyboard if i flick my mouse fast so annoying
i hitted 5 times in this week 😄
Yeah if you play a competitive game 60% is a must have in my opinion as long as you dont have your keyboard far on the left
It works!!
The rgb is fucking sick
it's sooo good
best i have ever seen
it's sooo soothhmmrhhh

Finally it is here thanks wooting!!!
1 ½ months cmon 🙂
My 60he turned up yesterday, I spent most of the day lubing the keys and putting it in the tofu 60 case and wow this is the nicest keyboard I have ever used and it sounds and feels so good

Wish you could lube me fr fr
ayoooooo🤨
I meant my keyboard for me chill
😄
Having to deal with lubed springs is the WORST
Your strap is upside down 😂
That just means everyone else watching can read it. Very helpful 
finally got it!
Got it 💜
What keypads are those?
that looks amazing
Got it 🤍
I see everyone wooted all over their keyboards
i'm getting ready to woot at the checkout. let's goooo!
black and purple pudding. The black ones are from steelseries and the purple ones are from etsy :3
Awesome. I've been looking for a nice black and purple set.
We are similar haha, waiting for my new key caps
Just got my 60HE today and wow. I love it. The nerdy attention to details, the amazing typing and gaming experience. The PBT caps. Everything. Just wow. Great product!
Got mine today! Thank you guys for making such an amazing keyboard 😄
I was a little worried about going from a full size membrane board I used for the last 7 years to a 60% mechanical so stacked with features, but even just using for a couple of hours now, it's been very easy to adjust to using and the customisation is brilliant!
Much love
I'll have a better picture in future when I re-do my setup after getting a new monitor 🤣
Did anyone re-lube the keyboard as well?

I did and I don't regret it for a second,.
did you have to use any o rings or any extra parts to make it sit well in the case? im waiting on mine as we speak and i have a tofu 60 i was ready to switch my wooting into because i love the feeling of that case and need the premium feel and sound it gives. ive watched some videos on it and just don't want to mess anything up with it. is the pcb an easy switch just to pop out of the wooting after unscrewed and lay it into the tofu? or does it take sandwhiching the pcb into the tofu with orings and everything?
1 to 10, how much of a change did it make for you?'
Huge difference in sound and feel for me.
I have a sound comparison somewhere in #996573707235491950
Did lubing it make it sound a little less "hollow"?
Hey Canadians, did you guys get import fees on ur wooting? UPS said $50 import fee for me
hey guys my friend accidently clicked on some command on the keyboard (involving the FN key i think) and it locked his keyboard so he can't use any keys, somehow... anyone know the command to get outta it by any chance? both me and him are noobs when it comes to 60% keyboards and commands
sounds about right
Sounds good just wanted to make sure it was normal thx
Hyped such a good product, got it today :3
Nice figure
Also horimiya = awesome Romance anime
thx yea loved it wonderful anime
Which anime is the figure from? It seems really familiar
Ahhh
bro nice figure 
I would love to get more figures but the bigger PVC ones are rather expensive
Yea this Version costs i think roundaboud 500-600 Euro or$
Understandable, its a really Nice figure
I did, based tech does a really good video on what to use, but I ended up using two orings on the 5 screws connecting it to the case, and layers of the foam he mentioned as well, two layers in the little indentation and then one more layer over the entire thing, then lube on the switches, and the things on the space key (my mind has gone blank on what they are called), I also lubed the 50g springs with the oil everyone recommends
Badseed tech sorry not based tech, stupid auto correct. His video on modding it tells you most of what you need to know
What wrist pad is this? Looks greatr
It's the Wooting wrist rest! And it does indeed look and feel great
The only thing I find weird still is that the keyboard and wrist rest don't combine since my full size keyboard had the wrist rest attached, so I'll need to get used to that lol
what language is that?
they're beijing opera keycaps. i believe it's called the Bronze Script which is an ancient Chinese script
it made me think of like ancient Egyptian letters
arriving within the week 
the varmilo beijing opera keyboard were the keyboard that i wanted to get before i met the wooting so can u tell me how the keyboard is i might want one in the future
Just paid my import charges cant wait to get they keyboard 
for typing is great! wooting for games
varmilo is for those who wants a good experience with keyboard and they dont want to spend a LOT of money on custom
First impression... not bad at all.
Waiting for second impressions
Where do u get that coiled wire? I like it
Keyboard parts have the worst stock known to man
We’re gonna go to mars before the stock on keyboard parts is better
just get the v2?
Not compatible
yes it is
https://wooting-technologies.notion.site/de7a52e2b5a941258a17e448b0c9d9b0?v=5ec0b31c59db4a51b8a86a1288249e9f tofu 60 2.0
Submit or request a review of a case by adding a comment or posting on discord
omg
im so dumb
forget everything I said
what mouse is this bro
Xtrfy MZ1 wireless (sometimes called Zy's Rail)
TY bro
Go for the psd60 or klippe t, basically the same for different prices
welp, changed my mind again
i realized i actually have a good technique
just that my current keyboard cant actuate high enough
nor fast enough
so
i re-ordered the wooting for my birthday
lolol
Finally GPX got worthy friend.
@rocky elk get artisan zero too deadly combo asf
@tame niche its right there on left. I like my skypad more
Bought like 8months ago
Let’s gooooooooooooooo
Damn
I get mine Friday if I'm lucky

is the wooting 60he faster than the wooting two he?
By a fraction of a second. The 2HE more keys it needs to scan each cycle, which takes ever so slightly longer. You can't really tell unless you're a literal machine testing the two.
Both use an ARM based processor.
Thanks Mansen 💯
can you tell me the rgb setting you use i like the one you put
so if you had just a small amount of keys it would be faster? (For gaming)
like only the left side of the keyboard?
I’ll check them out Ty
I use a gradient similar to the one in the "Inferno" preset.
I just replaced the yellow with orange. So concretely: red, dark orange and a slightly lighter orange (from left to right).
I can't confirm that at the moment. I have been waiting for the board for a long time and actively watching the opened cases in the Support Center.
I cannot confirm any of the issues raised there. No high-pitched noise when the LEDs run at 100%. No crooked keys or even a crooked borad/PCB. No damage to the keycaps, screws or anywhere else on the case.
The lubing of the switches and stabilizers is also okay.
No problems with the Tachyon mode and also no problems at an actuation point of 0.1mm.
After all, I am satisfied with the keyboard. After one day of use, I can't find any fault.
ok thx i will try
It is a CableMod Pro Coiled Keyboard Cable (Midnight Black).
Since I don't know if I'm allowed to post a direct link here and I'm based in Germany, it's best to ask Google. There you will find it.
I can at least confirm that the keyboard works fine with this cable even with active Tachyon mode and turned on LEDs.
Wait with tachyon as well??? gonna cop this instead of the lethal one
definitely, yes. No problems at all
A lot of coiled cables work with tachyon - you just can’t have brightness turned all the way up
Woot w00t
That may be. I also have no problems with the cable when I set the LEDs to 100% brightness. But I must say that I use it by default with 60% brightness, because 100% is too bright for my liking. I also have a 15 cm USB extension between the coiled cable and my laptop because I need a 90 degree angle plug.
I think it is partly due to the quality of the cable and the USB connector and USB controller on the motherboard.
I'm glad it works this way for me.
It's Wooting time!
At what stage do you need to confirm your adress for the wooting
Finally here !
Just need to find a matching ISO enter keycap now, or maybe DIY 🤔
Gpx user
Good mouse
a fellow chad wooting + x2 bruce lee user I see
he means when your computer first boots up , not during actual use. actual use they are both the same
oh
I don't think that's what he means
both functionally the same yes
Second impressions are in 🕺
but technically and probably barely measurably there would be a difference
"literal machine testing the two"
"each cycle" (closer to refresh cycle, not boot cycle)
in the same way as how LCDs are faster at the top than the bottom, I guess
Yes sir
my wooting just arrived :D can someone help me set up a workingta anaglogue profile
also im confused got an american
keycaps and uk#
[[[[
Some sets contain both because it's a difference of a few keycaps. Cheaper to combine than have two separate.
ok is there a picture so i can copy it con fused whats where
the keys are at the same place if you didnt xhange your computer layout. you can also change your computer layout to british english so it matches the keycaps
i b ought the uk version though
i just don t remember whic h order goes which key yanno
they come prearranged
@midnight scaffold
tysm lol
did someone say they swapped out their caps for ctrl?
same batch
thx wooting for this beautiful keyboard ( i modded it with a wodden case and faom) 🥰
is it ok if a tiny bit of the lube is on the magnet?
cus im lubing it now and sometimes there is a tiny bit of lube son the magnet
will that affect the hall sensor?
u can lube me
Its finally done. Left shift has a little bit of rattle but ill do that tomo
I love the keycaps design so i decided to use it with the white aluminium case
sorry for poor quality my phone is shit
720p lol
how long did lubing take you @long mango
defs worth it tho :D
So i will be fun lubing my full size one when it arrives and it being the first time i lube Switches
would anyone be down to buy a keyboard, i’m selling one. actually like 3
its was my first time
but i got used to it after 5 switches
its just rince and repeat
Are those the key caps they sell on their site?
what keyboard tho
one is a gk61 with optical yellows
But I will have a few more Switches to do
Guess im just gonna Listen to a stream or music while doing it
one is a DNA65 custom, with gateron yellows. And it’s sound amazing, stand and switches lubed
and the last one is the expensive one. It’s a tofu hhkb with lube and filmed zaku switches
yea do that, I was just in discord with my friend chatting while they play valorant
i think there are other places that sell them and not out of stock, but i wouldnt know since i havent searched for it
Thats also a good idea
I will just make them watch me lubing Switches lol
lol thats what i did
what does lubing do
XD
Makes the stabilisers sound and feel smoother
they were saying im cringe for lubing keyboards and spending hundreds for case and keycaps
ooh ok
and the switches
My friends will probably just be like "You missed a Spot" while knowing nothing about lubing as Well
Most people only do it on the stabs, it seems
not true at all
although most nice switches come factory lubed. But it’s not usually the best, so ppl do it themselves
if i knew how to do it i would lube me wooting
Thank you, I was referring to the white key caps with the transparent letters tho 😅
ohhhhh yes they are from the wooting store
i did both switches and stabs, although my left shift is rattling cus i probably didnt lube the stabs properly
il do it tomo
Did you remove the lube that Was at the switch/stabs or did you just applie some more?
u can’t really remove it
Oh okey
i applied some more but i might have scraped some off while putting it back on
Alright
yo
yo
mines coming in march 16 - 17 

Yes
im so happy 
yippee!
Mines out for delivery 
yay! same
EU-Raket gang 🫡

No rgb passport smh
sadly not

Best mousepad ever
dawg no offense but you should clean the earpads
It got natural patina, like a good cheese
probably smells like finely aged cheddar too
It's a sick setup though
Not a big fan of glass mousepads but the yuki aim one is beautiful
nice mousepad
are those beyerdynamic dt 990s? got the same ones 😄 lol
🥲🤙
I HAVE IT
It arrived
I love it
I love everything except the super clacky spacebar 
So true bestie✨
Why do stabs even exist
just.. have 2 (bspc/shift)-5(space) switches instead
mine only gets here in the middle of may 
unironically would be so much better & allow for much more freedom
Exactly. Firmware is the #1 factor of keyboards and it would allow so much more flexibility on that front
Like; look at split keyboards - thumbkeys are OP
imagine a spacebar with 5 different switches
thumbkeys are OP I want a split but don't reallly wanna build one or spend that much haha
also the sound/feel of normal keys is just.. universally better than stabbed keys
at best they're close but never better
same here.
need some new caps
Does tachyon mode work with that coiled cable
Cuz coiled cables make keyboard act out
its working
I dont really know how to tell if it doesnt work but the keyboard is working normally
i just set rgb on 45% just in case
Ah then it should be fine
It starts bugging out at 100% brightness
bugging how excactly?
I think these caps would fit the best
then I need to lube the switches and maybe do something to the stabs if I feel like doing so
Dunno, people just reported that multiple times
You will notice for sure
well ill just keep it at 50%
I wanna do a bakeneko type mount if thats possible
like o ring gasket mount
Man Idk if I wanna lube the switches or not they are so smooth stock
nahh I wont lube them
step 2) waiting
all steps are just waiting 😄
Apart from n+1 which is getting the board
My wooting is so close im very excited
This looks like an AI image
When did u guys order urs?
What mouse is that? 🙂
Its an mz1 - zys rail wireless
xtrfy mz1 the mouse rocket jump ninja(yt) made with xtrfy
Ty ✌🏼
Tofu60, cherry profile pbt keycaps, tape mod, copper weight, burger mounted, case foam, pcb foam
It sounds great
it does? I dont like the lekker sound
im gonna need a sound test from this one
doesn't that like... block tthe keys?
which keycaps… these look so good
Productinformatie: Specificaties: de keycaps zijn gemaakt van PBT-kunststof, dikke PBT (ca. 1,5 mm). Layout: geschikt voor handmatige slagbewegingen, aangenaam handgevoel. Hoogte: kersenprofiel, lager dan OEM-profiel. Inhoud levering: 1 x keycapset. 1 x sleuteltrekker. Tips: Als er een gebroken p...
Ok… this is the pimpiest wooting ive seen so far. Hats off to your build.
Wasn’t that an ai generated image
I think he said it was
did you find a good yellow rgb color close to the color of wooting cable or it's random yellow?
its not real
Dang it. I’m guessing midjourney or bluewillow AI
how do you like the mz1 wireless? i was going to get it, i have the xtrfy m8 and lamzu atlantis mini tho
anyone know where I could get this type of color but blank?
He said he wanted to see if anyone noticed the AI keyboard image was fake.
can i steal everything about this please
did you get it
same keycaps, so good 🙏🙏
i did
w
and affordable
wooting 60he w the razer viper mini and office mousepad 💀
maybe i shoulda upgraded other things first
tbf, razer viper mini is a banger of a budget mouse
that mousepad def needs an upgrade though 
cant fucking wait for the 60he to get produced and shipped 🥹 my shitty razer huntsman keeps ghosting and stucks an input 😭
hurryyy up wooting i need that 🔥 kb 😭
looks so clean
def, razer did a greate job at the viper mini and its cheap cheap
mine is estimated to come in 3 days 
Sorry, I only own the wired one. I really enjoy the shape, so it’s actually kinda weird that I never pulled the trigger on the wireless one
Trying some silicon keycaps out for gaming sofar they feel great!
Ima need a sound test too
it looks like the wireless one to me i don't see a wire lol 😄 but cool
It’s not my setup 😭
lol
cool, im thinkin bout pullin the trigger on the mz1 wireless lol. just got the xtrfy m8 in the mail, its nice
waiting for my lamzu atlantis mini to come in now lol
I used yellow there :))
Is there a benefit for using those for gaming?
i do have the atlantis mini, and i can confidently say that ill be using this for a very long time. i used to main the xm1r, but always thought it was a bit too big. so when the atlantis mini camme out i had to buy it 😄 definetly dont regret it
how is the qc on your mini?
my og atlantis has weird scroll wheel from time to time when i scroll down it jumps back up by one or two steps
and the scrollwheel sounds a bit scratchy
scrollwheel is kinda hollow on my copy, and if i press hard enough on the left side it makes a click sound, but doesnt actuate any of the side buttons, it doesnt happen ingame so doesnt matter to me at all. otherwisse its perfecct
I'll post one after lubing as well
Ayyy is the etsy case?
I can make out the english katakana and other languages mixed in 
Has some artisans in the mix as well
@earnest tulip i just really wanted to try some keys with different texture, they feel nice and smooth but grippy too. and i like the height. when i comes to key caps its all personal pref really. Good thing amazon has 30 trail period haha and the set was only 20 bucks
🥹

Yeah sounds interesting. Never heard of silicone key caps
man the wooting is so nice
only issue im having is that i tap too early on jumps in osu
Swapped out the key caps with KBDFans Clear2048’s 
Definitely need to dim the RGB brightness, I almost went blind plugging it in 
really got a give it to wooting for making such a damm great keyboard
I think I'm going to set idle brightness to 0 and then use Trail or AOE, looks pretty sick
Trail's my jam as well. I set mine to 20% idle to have a bit of light, and then trail gives me a nice and not too intrusive effect.
can anyone recommend a good wood/walnut case?
Don't have a ton of experience with wooden cases - I know the wooden variant of the Tofu works, but generally with wooden cases you have to be willing and able to shave off a bit of material.
Does the idle brightness on the Trail mode only apply when you save to keyboard? (using web wootility if that makes a difference)
https://wooting-technologies.notion.site/Tofu60-Walnut-164782dfb40f4f4cbf261fc75446efd5
Like shonw here.
Inner sides need minimal sanding (few milimeters) so the height of the plate can fit inside the case.
thanks for the info @tulip sphinx . very achievable for me. appreciate the info
Never mind, I see where I went wrong. I checked "Random Colours" so the idle brightness wasn't being shown on the keyboard
Link to kbd is broken in notion
Means it's probably sold out and not returning.
30 days after I received my 60HE I know that gaming keyboard without dedicated F buttons is a huge nonsense for FPS games!
In all my years of pc gaming I've never used the F keys for games.
i use them in some games but usually super rarely and it's very macro heavy games where i rebind f key to something
never once in fps though
I play WoW. (Well, not currently.) But even in WoW I never used them. I just always used shift+key or alt/ctrl+key. It was always easier to do that then reach up with a finger to press an f key.
Some of us just have too many keybinds even in WoW to rely on only modifier keys. I use both modifier keys AND the first third of the F-Row 😄
Haha, well I guess it depends on what class but I've never had to use them. Especially with 2 or 3 mouse buttons to bind as well.
How do you change seats in vehicles? Just thinking about it 😄 For example Battlefield and COD series
F9 = mute voice chat, F10= mute game, most important f keys in warzone
the best FPS mouse didn't look like a DJ controller xD
what about Battlefield?
Changing seats in cod I think is "x" for me. But it's been awhile.
I just give an example with COD. I'm having trouble with Battlefield
I'm not knocking you for using them. I'm just saying I've never had too.
I haven't played BF2042 cause I kept hearing it wasn't very good. So I don't know anything about that. The last Battlefield game I played I think was 1
using Fn+Num button is not an option coz I need to stop holding the mouse and MT feature is adding too much lag
BF2042 is a trash but BF4 is still madness 🙂
Never could get used to MMO style mice. The way I hold my mouse doesn't make for a great "clicking side buttons" experience outside of just autorun and voice chat on the default two most mice come with.
I just want to see the same KB + F buttons and I'll buy it too
same
I've never used MMO mice. Too many tiny buttons. I got into a tense moment and start clicking everything when I tighten my grip. My Logitech G pro only has two buttons that I made 6 macros out of.
MMO mouse is not comfortable for first person shooter games. I'm with razer deatheadder V2 which is the perfect type for my needs
mmo mouse is ok for wowbut they have issues with sometimes it's slower to use mouse button vs keyboard, so a lot of top wow pvpers prefer non mmo mouse these days
I can add additional row at the top with arduino simulatong KB ,but it won't look great 😄
I don't care about WOW players 😄
alt 1/2/3 is pretty decent, same with shift 1/2/3
but i've never had to use mods for an fps game before honestly
usually you can find enough single key mods for everything
Not working while jumping aiming and shooting around
you don't do the jump to scroll wheel thing?
most fps players bind jump to scroll down
i need to use numbers from 1 to 7 and F from 1 to 5
unless you mean apex for their movements they have to do space
z to v are good options for bottom row if they're not bound already to things you regularly use
a lot of times games bind useless junk to that stuff so you can just rebind over them
one row + to the height cant hurt Apex Legends
z to v are bound
always using them
man i think you have more binds then wow players lol
do you play Battlefield?
not the newer ones
then what you talking about xD
it's just swap seat keys and such right?
not really
i mean for gaming it's whatever you're used to
so something thats double shot pbt?
if you want grippy you could go rubber keycaps but those are annoying with needing to be replaced often due to dirt/wear
pbt or abs work fine - it's just preference there
i like pbt more though
I just need dedicated buttons 🙂 One row + cant hurt the mouse space. The keyboard is eating mouse space only if it's wider
that's a super rare keyboard size
my wooting is coming on the 6th or 9th are the keycaps a need for reaplcing?
very unlikely for wooting to ever release that f row small form size as it's very niche
it's just for looks - the keycaps that come with it are fine
any suggetions for higher quality keycaps liike the hyper x pudding lol
it's literally all 100% preference on looks. Assuming you go with something like pbt there's a million options
if you want good brands you can look at pbtfans and epbt as 2 super popular pbt keycap makers
I got mine today, but I’m still struggling with the macros :/
i'd love a 75% too though, since it's ideal gaming size with f keys and arrow still, but realistically they'd make a tkl instead and even the tkl isn't something they have planned right now due to being busy filling current 60he orders
yes wooting one was good I still love it
but some Keys stop working after I give it some beer to drink xD
modding the keyboard is just for looks or like sound and comfort, becuase I dont care I just want the keybaord for gaming
im going from a ducky one 2 mini to this so it was a long time upgrade
I didn't miss the section with the arrow keys but the F are important for many games and programs
qwertyuiop[]\qwertyuiop[]`1234567890=qawsertyuiop[]\qwertyasdfghjkl;'
ASDCFGHJKL;'
asdfghjkl;'
it's just for looks if you're swapping keycaps - there's no performance changes
stuff like lubing and changing case are just for sounds correct? Ive been just playing videogames and just got into this keyboard community thing
yeah that's just for sound and looks
oh ok good
it'll perform just as well without lubing, just won't sound as nice
if you only care about gaming performance you don't have to change anything at all from stock
In heli X is fire countermeasures C is change camera ... etc
traitors tiger sketch keycap + angry miao glacier keycaps dark version. it’s edited btw
the original keycaps
Tofu60 walnut o-ring mount
Excellent choice to swap the core keys, that looks epic
agreed
The warm orange yellow mixed with the green tinted miao keycaps trigger me personally. But if it works for you, power to you 😄
it's like fancy boogers
yayy
someone done it above u gotta scroll
Blast some bright yellow RGB through them at 150% brightness and you'd never notice
Yeah sure there's usually a curve there to consider. 😄
LMFAO
missing the extra modifier keycap set
why isnt anypne buying them they look nice
The what now?
Ah yes. The good ole Lekker caps 😄
Aaaaaaa I cant find any nordic sets on aliexpress
why in the world does shein sell keycaps💀
how do I know what keycaps fit the 60he? The shift keys seem to be either very big or small
anyone know any recommendations for pbt keycaps for nordic iso layout?
Ours? 
Does anyone know if the Wooting will fit in the Poseidon PSD60 from AliExpress?
I got your double shot pbt keycaps but they are unfortunately a bit too shiny for my taste :/
It does
Thank you! Really wanted a tofu but clearly those are never coming back. Think this a good alternative (budget-wise)?
Alot of people seem to like the case. It has some issues with the paint on the logo in the back of the case, as far as I am aware
But it's cheap
Appreciate the help, that is all I have seen so far, not an issue for me as I’m brand new to keyboard modding and just excited to get my hands on my board this week
metal > plastic
Got it all set up
ah
I'm afraid of the big enter key.
I wonder if the English keycaps that mine will have are like that 
Did you take ISO or ANSI version?
Well, ISO would have the big enter key, so it is probably ANSI
"English" could be either.. ISO-UK has big enter, ANSI-US has normal sized keys
Yes, but would someone who is afraid of the big enter key get the ISO version?
boo
I got the base one for U.S. English
Is that the wrist rest under the keyboard
I cannot tell
It looks so flat
Check your order from wooting's site, you'll see if you ordered ANSI or ISO version, based on that you can see if you have a big or a small enter key
it is
1/5th of my 60HE arrived 
now i wonder why you ordered replacement switches
taking precautions in case i break a bunch 
Soooo close
that’s the pg259qnr?
only reason i’m not swapping the case is because i need that nylon strap
that nylon strap increases ur performance
i believe so
it’s the 360hz 1080 monitor
i have one bt prefer my aw2721d cause i can’t see shit on a 1080
i have a 32inch 1440p next to it so im fine
I used a nutcracker to open mine so you’re leagues ahead of me in the proper handling department

I used the wooting switch puller and still was struggeling with quiet a few switches
Did you pull them straight out of the board, or did you screw it apart and just have the switch plate in hand?
Wtf ups. Lets hope the packaging did its job.
NA-PANTS FTWWWW
CONGRATS EVERYBODY ON GETTING THEIR WOOTING !!
Aw man :( unfortunate
Patience is key tho
That's real shit man
Mine gets here sometime early April, so not too much longer now !!
Being in the discord won’t help make it go faster
Unless there's a game night event and you can beat Calder at whatever game and get your order insta-shipped 😉
Is that a thing? Lol
It happened fairly recently
Is it like a raffle for who gets to play them
We aim for games where there can be loads of concurrent participants
Fall Guys was the last one
How can you Not think about it when youre in a discord where ppl talk daily that the keyboard arrived
At least for me thats Not possible xD
Both, still struggled with some switches
don’t scare me like that mine comes in tomorrow via UPS 😭
NA-PANTS REPRESENT!!!
how is everyone getting their NA-Pants orders 
me and some others are still showing "package not received yet" on USPS tracking
the packaging did its job 😉 the keyboard came in prestine condition





