#rmx corsair psu series can connect with rx 9070

1 messages · Page 1 of 1 (latest)

topaz mesa
#

I'm not sure to understand the question but since I see newcomer on your profile I'm guessing this is your first PC.

PSU cable can be plugged on any hardware. It's the cable that doesn't come from the PSU that cannot be plugged to the PSU directly.
||So yes you can||

burnt idol
#

i mean rx 9079 is pci 5.0

#

rmx 1000w has the connect things to connect with the rx 9070

#

i dont know much about psu

topaz mesa
# burnt idol i mean rx 9079 is pci 5.0

That's the gen of the PCIe pin. 5090 cannot fully utilize 16× 4.0
So 9070 cannot fully utilize 16× 4.0
You can easily guess than if you don't utilize 100% of 4.0, 5.0 won't make any difference. This have kinda nothing to do with PSU

burnt idol
silk jay
#

Its overkill

burnt idol
#

what

#

the psu?

#

the 850w is 30 euros cheaper

#

so i am going to 1000w

topaz mesa
#

Depending on price there might be better choice

#

Here the RMx 1000W ATX3.0 cost more than the NZXT 1200W ATX3.1

#

Make no sense to get it

burnt idol
#

i was about to buy be quiet pure 12m 1000w but it costs 165 euros

#

and i buyed rmx 1000w because is better with 180 euros

burnt idol
#

i got the card but i didnt installed it yet tommorow the psu will come and then i will installed the things

topaz mesa
burnt idol
#

?

topaz mesa
burnt idol
#

what…

burnt idol
frosty swan
#
  1. 1000W is too much for this configuration (unless you know you'll upgrade to bigger components in the future)
  2. Yes it will work
  3. It'll be slightly less power efficient than a correctly sized PSU (few percent +-) and more expensive

I cannot find an "rmx 1000w atx 3.0" PSU from Corsair. Is it 3.1?
It's a very good PSU anyway.

burnt idol
#

yea is 3.1

#

i know is very good psu

burnt idol
burnt idol