#technology
1 messages · Page 450 of 1
It will
Newly featured LLC, significantly higher shader count and clockspeeds over predecessor
Will be largest generational leap for Nvidia
RTX 4090 at least 1.8x faster than 3090 in rasterization
That sounds familiar LOL
that might be true but 4060 likely beating 3090 is laughable
RTX 4060 die size is larger than GA104 (3070Ti) supposedly
how about we just wait instead of watching moore's law is dead?
L3 cache will make a chip significantly larger
Large dies + 5nm node = ludicrously expensive
Up to twice as expensive as RTX 3000 series across all tiers
soon every card will cost 1k
right, then u are gonna compare zen 5 against meteor lake, and bam 2025 royal cores form intel with beat everyone.
very cool
enough rumors, I want gaming results when its here
I expect GPU shortage to be much worse with next-gen since AMD and Nvidia are both using the same node from TSMC
On top of that Apple is still hogging up 5nm silicon and it seems they will all of next year too
If you want top class performance, you won't see that from Intel GPUs
Plus early adopter problems
I don't feel confident in Intel drivers
That's why I used
emote
So AMD will release RX6500 and RX6400. In this case, Nvidia will release RTX 3050 Ti to compete?
no
why after update they made game worst? now every time when i get into car in hazard zone i cant use my scope after i leave car
how fix that?
RTX 3050 and 3050Ti only seems to be found in laptops, haven't seen one leak nor even rumor showing discrete ones for desktops
is a 1660 Ti enough to run battlefield?
i see people on youtube showing it of at like 60fps on high settings but i can't get more than 30 fps on the lowest settings and am trying to figure out if it's my gpu or something else
Which cpu
i7-4790
quad core.. damn
not enough?
wait?
they will fix it eventually, and the load on the cpu will be lower
Okay so you think my problem is my cpu and not gpu
how much ram do you have and what speed
16gb
What do people use?
So I probably need a new computer but not necessarily a new GPU?
That would actually be good news for me
motherboard, cpu and ram
12600K is pretty good for price
10400/10500 if you want it cheaper
anyone know a good wireless keyboard, and a good wireless mouse? mid range is ok doesn't have to be too fancy
is there a channel for bug reporting?
g903 hero is a great mouse
not here
Cheers. How does that compare to the g pro wireless?
well aside from shape/size
the g903 has a longer battery life and weighs a bit more
aside from that theyre pretty similar
also the gpro doesnt have an infinite scroll wheel
which is pretty handy to have
on battlefield forums
I can't bind anything to my mouse in game, it just assigns a random input. does anyone have a fix for this?
anyone have issues with their mouse? cant look up or down .. only to left and right ..
Do you think the performance will improve with patches and updates for 4 core CPU’s over time for 2042
Haven't seen anyone else with that issue
SMT/HT?
Hy, I have problems with the graphic/display settings, even thought i've changed them multiples times to low and high, went throught some nvidia/windows settings the game performance are very bad.
If anyone could help me.
What Pc do you have?
I Have an RTX2080, I7, 16Gb ,Window 10
Put this command in every game: render.dynamicresolutionmaxstepcount 1
In every game
What's the processor and ram speed
How can i see it?
Control + shift + esc
Hey so I have the reccomended specs to play bf 2042 but I only get like 30-40 fps. Can someone help
And then put performance
You have all in low?
That's oof
Im getting more soon
make sure you nothing running in the background.
But the lowest is 8 so is “good”
I have nothing except discord and bf
Put this command in en every game
no 3rd party apps or anything other overlays...
30-40fps is good better then not being able to play the game imo
Put this command in every game: render.dynamicresolutionmaxstepcount 1
I noticed that my gpu is only running at 40% too
The GPU Speed? @prisma anvil @exotic agate
If anyuone knows how to make that 100 im sure that would help
what's the cpu running at tho.
you don't want it 100% that'll blow up your gpu
CPU is at like 60-80
Well I know 30 isnt good
Rtx2060?
RTX 3060
My Gpu is at 2%
XD
30%? yes it is in this instance. the lower the better.
Well I know i should be getting more than 40 fps on low
not true. if you don't have a gaming monitor to push more then 40fps then your exactly where u need to be
I have a 144hz monitor
did you change the settings in the game to reflect that, & did you place your game in full screen mode. cause i run at 105fps in the menu
I play at 1080p, fullscreen, and I get that in the menu also
honestly the way you should look at it. as long as your not lagging and your able to successfully play the game you shouldn't worry about it. simple as that cause it could be worse and you be in the position of not being able to play at all.
Well I goes down to like 10 fps alot so it almost is unplayable
You know how to open de console?
wdym
I meant what is ur cpu like 8700k? 10700k?
https://www.drivereasy.com/knowledge/solved-battlefield-2042-fps-drops-and-stuttering/
Do not download drive easy
press `
I have a R7 4700g
Yes that
go to canirunit.com and go through the processs and send a screenshot of your specs compared to the webstie.
https://www.systemrequirementslab.com/cyri
ok
I have a ryzen 5 3600X and a RX570 16 ram and the game is in 100 fps
already set the setting between the controller on foot and the keyboard on foot to the same values? set the PROFSAVE_profile file in GstRender. ShadowQuality from two to zero?
So my Cpu stay at around 50%, at a speed of 4,29Ghz, It processes 283. My Gpu is at 5% Utilization and only 54C and Uses only around 6gb of memory out of 16.
What should i do?
Enable xmp
Hey
And then put this command in every game: render.dynamicresolutionmaxstepcount 1
Could you explain me how pls?
I press it nothing happens
what is xmp? what's it going to do?
My CPU had 90° desktop, Water aio was broken, new pure and go from 15 fps up to 100+
Mmm
Extreme memory profile. Most ram have it to run it at the rated speed
Bruh moment
do i need to shut down and then relaunch the pc and press F2?
Yes
k
I would send the pic of specs but I cant send in here
I wouldn't recommend playing with the xmp that can cause damage to your system.
The poop thing of battlefield is that we don’t have voice chat
That's what discord is for
Most xmp is fine.
most, if the system is setup for it and if the user doesn't know what they are doing they can severely fuck up their system and damage their CPU
Now that im in the bios what should i do, i dont know very well this domain
But how we can talk to Xbox and play friends
Sure then enjoy ur sub 60 fps at jedec default speed
.
i don't get 60, i got 150+ thank you.. i don't think it's smart advising complete strangers on how to modify their systems if they don't have the knowledge
i don't have an intel cpu
I have two type of Xmp
that's specific to intell you should read up on your hardware.. sounds like you don't even know wtf your talking about let alone advising people to change their system...
Me?
2133 cl15 stock 70-90 fps, 3600 cl16 xmp 110-150 fps, 4000 cl15 manually tuned 130-170+ fps
Xmp1 and xmp2
I helped over 6 people here to get over 100fps
Can u help a 7th
I don't need to learn anything thank you
https://www.pcgamer.com/what-are-xmp-profiles-and-how-do-i-use-them/
do your research guys...
@prisma anvil i am not doubting anything.. but the user needs to do their own research and know the pros and cons. listening to someone can fuck up their system and then they don't have it... By no means i'm i saying not to help.. i'm simply stating that you should be educating people of the pros and cons if your going to do it... do it the right way rather then just telling them to do abc
Help?
He is on Intel. Unless he is at 11th or 12th gen. Or using smth like 4000mhz ram with a garbo board it's fine.
I wont die
hyperthreading/ two or more threads per core
I've selected Xmp2
How can i improve my Gpu utilization?
XMP does not damage the CPU
Yeah nice way make ur self look good.
It can cause instabillity if it's higher than the MB/IMC can handle, but never do any hardware damage
It's OK I will help @surreal laurel
Even if he is on Intel 11th 12th gen high xmp speed will just get to gear 2 anyways.
It was on gear 1 i ve placed it to gear 2
u are on intel 8th gen @surreal laurel u dont have gear 1 and 2
Oh so you mean like a 6 core 12 thread cpu?
Gah'damn I love 2042, but holy shit... using 21GB of RAM is just ridiculous
maybe restart the game once in a while.. 😛
that just kills the mood lmao
but yeah
hehe
wish it didn't happen but oh well
ram problems is the norm now for new games i feel like 😄
yup
I hope the next update has fixed some or all the mem leaks
Okay that makes sense
@fringe crest glad ur getting more fps!
Yup, new ram 20+ fps 😄
👍
I7 10700k+RTX3080, all low on full HD = 38-65FPS, great job, DICE, great job
sounds like user error
lol, what I did wrong?
default ram speed maybe
3000mhz DDR4
hmmm u should be getting close to 100
yeah, I don't know what to do, I can't kill anyone like this, it's a laggy mess
ok, thanks
@hasty escarp Thanks to @prisma anvil For helping me
ingame i get everytime a yellow window icon , what does that mean ?
those?
its thw low fps one but its empty , i get like 40-50 fps on low , and ppl start laggin around
would u recommend getting battlefield with a i5 10400 and a 1660 super with 16gb of ram?
ram speed?
i need pc buying advice
it says 2133 idk what it means
what is xmp?
Anyone know if upgrading from 3600 to 5800 Ryzen worth it for 1440p in this game?
Seems like Intel plans to release a new generation of GPUs every year, unlike Nvidia and AMD who do it every 2 years
That's interesting. They do have their own fabs so they don't need to wait for production lines to free up at TSMC. Hopefully this means we see more competitive products from them.
@agile vapor yes
i have a 5900x and i had a 3700 and its a big difference in stability and fps
How much FPS went up?
Interesting
bf is a cpu bottleneck so makes sense
Yo Persistence data fix how
CPU and RAM
try over and over again
Zen 3 is impressive, would of been even better if it got a node shrink
Although tech companies gonna need to rely on making massive architecture improvements for each gen instead of just shrinking nodes
The performance jump from Zen 2 to Zen 3 and jump from Rocket-Lake to Alder-Lake are both amazing considering they weren't moved to newer nodes
Rocketlake is 14nm. Alderlake is 10nm aka intel 7
Ah true
Rocketlake is a gaint meme
RKL was supposed to be 10nm
Pretend it doesn't exist.
intels delays put them behind a ton
they are now better than AMD but are extremely inefficient
Zen 3D likely to take back gaming crown even tho Zen 3 is still fairly competitive with Alder-Lake in many games
Yeh, should be a good battle. I just hope Intel are ready for Zen 4 with their 13th gen.
13th gen isn't as big as IPC gain as 12th gen was afaik but it will double the amount of E-cores and add hyperthreading to them
Multi-threaded performance will be big
Zen 4 is a monster, 30% IPC gain at minimum, some rumors point to over 40% like we saw going from Piledriver to Zen
by then Zen 3 threadripper might be out though, and its gonna get compared to that if its 20C
I wonder if that also means 5.1 still possible
can some one help me?
i have i7-10700k amd 6700xt in medium settings i get random fps drop from 150-160 down to 90
yeh, it will happen when the player count in your vicinity suddenly increases
yeh, with 5900x at 4.95ghz and 3733 CL14 I have increased those drops to 115
@valid locust hey what is your motherboard just curious
just sucks because it skips when it drops that bad
MSI X570 MEG ACE
guys is 70 c full load normal with a ryzen 5 5600x and a hyper 212
thats pretty good
Would be fine even at 90C under full load
Alderlake is actually efficient.
It just have unlocked power limit pl1=pl2 by design.
U take an amd cpu and pbo2 it to intel's power limit. Or take intel's cpu and limit it to stock amd limit. intel should be more efficient in most cases.
Also gaming wise alderlake is undisputed by far. A tuned alderlake yeets a tuned 10th gen and tuned zen3. Using ddr4.
Alderlake is the first cpu with good IPC, good clock speed, good imc and no chiplet design at the same time.
They kinda knocked it out of the park really.
Zen3 is good IPC, decent clock speed, bad imc at 1:1:1, chiplet design. 10th gen is meh IPC, great clockspeed, awesome imc, no chiplet. That's why they trade blows when both fully tuned.
I wish intel would make 10P core no e core cpu haha.
More likely to do 10 + 10
An e core cluster is 4 cores.
Like Idk about e core. They are great for streamers but completely butchers the ring clock.
Buildzoid did a test and the ring clock did 5ghz with e cores disabled, only 4.2ghz with them enabled.
any good way of boosting frames?
Msi board are actually goated. Just pretend dragon center doesnt exist haha
whats you spec configuration?
1660ti with i5 10100h
ram?
16gb of 3000mhz
@valid locust does bf have memory leak?
ive noticed the space in my ram decrease as i keep playing
eventually this leads to my random crashing i think
I am curious as well.
ill test that theory out
Yeah I can't do long game session, 😅 I take myself out of the game after 3 matches max
Yall real gamers can get this one.
maybe turn on futur frame rendering in bf,. change some bio settings (xmp...) and turn off any backround tasks while you're gaming
not really no i have 32gb its useless
Has anyone upgraded to windows 11 yet?
no
Intel sticking with 8 P-cores for 13th and 14th gen, both of which have 16 E-cores for a total of 24 cores, Zen 5 will also be 8+16 core it seems
AMD gonna follow in Intel's steps with big.LITTLE
I'd rather Zen 5 be 24 P-cores with 300+W power limit
oh I l know. I watch moore's law is dead as well. although for entertainment purpose only
ight
thanks
no prob
AMD will go big little for sure, the question is when.
I am ok with it, if their big cores outperform intel single thread, because that will be the way to be game king for a while.
If they make their P cores the best quality silicon there is, even something like a 6P + 10 E at 5.2 ghz / 4 ghz would be fine
All of a sudden my mic isn't working
I haven't thrown it or nothing so I mustve pressed a button that muted it
check your windows sound settings
Oh boy I wanted to go down to the states and pimpslap a friend just now because of their PC problems
I need to vent here in technology, and I hope nobody minds
is this good for $1000-Intel i5 11400F - GeForce RTX 2060 - 16GB DDR4 3000MHz - 512GB Intel M.2 NVMe SSD
1000 USD?
The 2060 is going for 600-700 USD on Newegg, and the CPU is going for 200-250 USD online. I'm seeing a similar NVMe Drive of the same going for 100$ on Amazon, and the Ram at this point already is Gravy. If this is in a prebuilt, that's pretty fucking good
guys, I have a little problem, my game crashes at the beginning of the match without an error, how can this be fixed? P.S developers can throw off crash logs
I have the looking down glitch and idk how to fix it
anyone know how to fix my issue?
nvm fixed it
so should i pull the trigger? its my first pc
good
I checked my windows settigs
I haven't seen anything that shows my mic being muted
On windows, discord, and the mic itself
in turkey that system costs 15k turkish liras
lol
that's almost the same price then, 200 bucks off
which is what it is now only due to black friday
so weird after Nvedia Geforce client update my fps dropped 20frames
anyone found any good fps guides? My GTX1650 and I5-9300H just don't the job
hi everyone recently today i starting to get instant crashes any ideas gpu driver updated what else remaining?
So I got the Acer Nitro 5 yesterday, and I gotta say I'm impressed with it. Alot of reviews have bashed it saying it underperforms but running BFV, Warzone, Apex and ARK at high settings I'm getting around 85-90fps, which was more than I expected it to. Only downside is the fans sound like a jet turbine going off, which I'm sure you can tweak the fan speeds.
That and not the biggest fan of the keyboard, it's actually a good buy.
havent been in here in like a week or so, has there been a fix discovered for the low gpu usage and high cpu usage issue that was plaguing some of us?
i havent touched the game in the same amount of time, was curious to see if any update or new driver fixed this
I was saddened to learn my CPU is outperformed by a 6th Gen I7
what cpu
depends also on resolution, the higher it is the more gpu bound you are
for example in 4k or more cpu doesnt matter as much as it does in 1080p
16gb of 3200
Sadly been needing to upgrade badly, but GPU prices, and I'm a student
And even if I could get 75 fps, the rubberbanding and shots playing the hit animation on a miss make it not worth it
Changed my swap partition to an automatic swapfile with zstd compression
So when I go over 20750 MB it automatically adjust size and use of swap, below it doesn't use swap
Pretty nice
Let Windows do the default and go pew pew is what I do
stuttering for me: i reduced it a bit by just disabling reflex.. actual input latency difference is as close to marketing as you can get.
guys over my fps i have something blue and i think it says NIT or something, anybody knows where this is from?
Can anyone help me with my settings for running BF also getting weird black screen / rainbow stuff on my screen when playing
mhh did you use nvidia reflex on+boost or just on and also do you use future frame rendering
disabled reflex enabled future frame rendering, cpu no longer spends 60% of my game time in red.
if you havent tried it yet try nvidia reflex on+boost and not just on
also for input latency you can try goung to nvidia control panel in the first tab select use advanced 3d settings then go to the 2nd tab and change low latency mode to on (ultra can cause problems if you re cpu bottlenecked) and also power magrment to prefer maximum perfomanxe
this should help with stuttering/input latency
only works for nvidia
@noble bane
also future frame rendering adds input latency but gives better fps
it doesnt add anything valid. future frame rendering isnt new.
and low latency is the same crap as setting "frames to render ahead" to 0. this is 20 year old stuff.
Tried it on COD and i played the same with or without it. i just preferred the less stuttery options
My cpu counter in game goes from red to yelow all the time, is that bad
it actually sets it to 1
while ultra sets it to 0
and causes a lot of stuttering if your r cpu cant keep up with it
No way to post a video in this discord? I’m getting weird issues and low FPS and my pc is brand new and 3080
it actually is a big difference in terms of input latency
in terms of fps doesnt change much
you need booster or reg
Welp
to upload direct
mhh what resolution and quality
I was scoping in and getting black screen or rainbow screen
also download latest nvidia driver (496.76) wich supporta bf 2042
id need the numbers, because the actually folk say it makes a huge difference but i guarantee you for any human being on the planet it's nothing they'll get any better with - also, i dont want to argue. I really dont. so i only care for numbers when it comes to "actually" type responses. And in my experience, high refresh rates are nice, dont make a huge difference, low input latency is nice, but a living being still takes 150-300ms to respond to most things.
I do
here you go
here are the numbers
thats overwatch.
im sure it works 100% the same all around and doesnt introduce problems at all.
it was posted on overwatch bcs its a competitive game
only problems are on cpu bound games and only if you use ultra but alright dude
ill explain this easier: it needs to make a difference, for the player, not for the computer.
so far. it mainly introduces stuttering, as it has for 20+ years.
https://imgur.com/a/VHRZxcY also this is from nvidia
oki dokies
depends on the game and pc, imo you need to try and see if its better or not
anyway you should basically never use the ultra setting
revan, the point i am making, a solid as hell one. is "max frames to render ahead" was always a thing people modified. it mainly causes problems even if it makes lower latency. in bf2042 it definitely caused a LOT of stuttering for me. and it doesnt not impact my ability to play on or off in any way.. because 30ms vs 20ms sounds nice in practice.. hell, vs 40-50.. sounds lovely in practice. but it still takes a human being 150-250 ms minimal to react.
thing is for me it gives more fps in some games at least for me
i get 5-10 more fps with it on
on rdr2
with reflex on? goofy.
I am getting a persistence load error whenever I launch 2042, it wont even let me get into the main menu. I've tried everything including reinstalling the game but nothing seems to work. Anyone have any ideas what my issue could be
on a pc? using wifi at all? hmmmms oh well, "not for tech support"
yes on pc with ethernet. I just realized that this isnt technically for tech support but I havent been able to get help from anywhere and all I really want to do at this point is play a game that I dropped 80 bucks on....
dot dot dot
ill dm you and try to plant some ideas in your head like inception but without the dude saying "use google"
r/iamverybadass
https://youtu.be/siYG2z3xspw what ???
My ram is bottlenecking the crap out of my system in bf2042, its 16Gb 2666 Mhz. What ram do you guys recommend buying???
is it really.
Doubt
Hmm
Ill DM you.. meh
its only 6c12t processor so that could be the bottleneck there
and get a faster memory like 3600mhz at low latency
How much is it gonna improve the fps in other titles, im not gonna upgrade for just 1 game
16 gbs is enough also is your ram 2666mhz or is that without xmp
(you can check xmp in the bios)
Without XMP, it doesnt support it
oh
also check the timings those matters too
If i buy new Ram i hope the bios doesnt lock the XMP option, bc its a prebuild
How can I check that?
around 5-10fps depending on the game youre playing
if the bios is locked only way is change mobo or mod the vios
you can check with softwares like cpu z or hwinfo 64
thing is he cant run 3600mhx
anyway are you sure, most desktop even prebuilts have an option in the advanced section in rhe bios
I cant find the option, maybe it pops up when i install the ram
I've never updated my bios either
then try to do it
what pc do you have? (like hp, asus ... etc)
find the latest version dude
I did
Acer Predator Orion 5000
PO5-610
alright then google it and find the latest bios
dmd you the link for that model
Saw it thx
alr check if xmp is there after the update, one thing if its not there then its probably locked
👌
the most weird thing is, im having around 80-90 fps in general... (everything on low with a ryzen 5 3600, rtx 2070 super 32gb ram 3600mhz) and those 80-90 fps are very sloppy, feel like 40 or 50fps... the sensitivity is very sluggish...
the game has issues with mouse input and also inputs in general
your processor is probably the bottleneck then if youre playing at 1080p or 1440
im playing 1080p
then or 3600 is def the bottleneck
very cpu demanding game
yes i know.. but damn..
physics 
How do we know if xmp works
its battlefield V all over again for me... when bf V launched i had a ryzen 3 1300x .. and i had around 50 to 60 fps... and during months i heard Dice saying they were working on performance and stability... but my performance and stability came when i bought the ryzen 5 3600, 9 or 10 months after... honestly i feel its whats going to happen now.. i doubt Dice will make the performance better..
start saving for a new cpu i guess
i mean its hard anyways when low spec poeple play a game 4 times the previous map size and with new graphics and 128 players tbh
like dont be suprised you can't go beyond low
the problem is that preformance isnt stable or constant, even in high-end systems
so its also tru they should work on the optimisation
mmm, optimizations an stuffs.

hey, currently having issues running 2042, I'm getting bottlenecks on my CPU...i have tried running the graphics up that didn't seem to work, I've change my NVidia setting to max performance and no change, updated all drivers and chipsets to most recent, even tried clean install of both driver (AMD and NVidia drivers). My specs are 2080ti, Ryzen 9 3900X, 16GB RAM, all temps are running fine and ive even tried to overclock CPU but no changes is performance. anyone have anymore suggestions? I've even disabled SMT which helped a little bit but not enough to be enjoyable for playing. (Keep in mind that this rig plays every other game fine to, is it just bf2042? or is my system dying?) do tag me in responses to please as i have channels muted
@trim plover whats ur ram speed? What's ur settings in game? Also how much fps are u pushing? Amd zen2 aka 3000 series are not great clock speed and IPC wise.
getting about 70fps in clear areas and 45 when high intense, 3600mhz, 90 when alone on the edge of the map
and lowest setting possible, only getting about 20%gpu usage
better cpu?
Nah

@prime jasper shit is bugged once again
bugged?
yea
gpu at 0 usage and the clocks are almost at full speed
installed a hotfix driver and for now it seems to work
it was at 50 degrees in idle...
oh thats ez. go to nvidia control panel manage 3d settings. and instead of prefer maximum performance make it optimal power or balanced or whatever, then restart ur PC
thanks, will use it in the future if the problem occurs once again
yeah prefer max performance is kinda dumb
pins ur gpu at base boost clock at all time
So I recently bought the game and have been having a ton of problems with my fps. I have watched tons of videos of other people with my specs and they average 70-90 fps at all times on low. I have an i7 9700k 3.6ghz with a 8gb gtx 1070 wind force over clocked and 16 gbs of ddr4. https://youtu.be/O9eEp0wMuIo here is a vid for reference. Anyone have any ideas on why my cpu is maxed out? No one from what I see is having such terrible performance with my specs. (Average 20-40 fps)
New nvidia drivers?
hmm
i can send you my cfg file
if u wanna try it
but im on r5 5600x and rtx 3070
getting 90-130 fps
Whats 0% MM?
https://www.mouse-sensitivity.com/forums/topic/4704-conversion-method-guide-and-other-faqs/
https://www.desmos.com/calculator/kiala2basq
FOV?
https://themetalmuncher.github.io/fov-calc/
Notepad++?
https://notepad-plus-plus.org/downloads/
Config?
Fr33thy's Drive
Configs, files and folders
https://drive.google.com/drive/folders/1oc...
or you can take this guy cfg file
Ok
wow this game does not wanna work with overclocks
What did u overclock?
???
xmp enabled in the bios
basically its a safe overclocking profile that the ram manufacture creatrd
how do i get to that
gave me 5+ fps in game its worth it lmao for a mouse click
It just gave me 30+ fps actually amazing
yeah ik lmao
Hey guys I downloaded BF4 and reduced all my settings to low or off and I'm only getting 30-40 fps but it's stuttery and visual lag everywhere. My internet connection is fine and is wired. My pc specs are -
CPU
AMD Ryzen 7 2700X 67 °C
Pinnacle Ridge 12nm Technology
RAM
16.0GB Single-Channel Unknown @ 1064MHz (15-15-15-36)
Motherboard
ASUSTeK COMPUTER INC. PRIME B450M-A (AM4) 67 °C
Graphics
2460G4 (1920x1080@144Hz)
4095MB NVIDIA GeForce RTX 2070 (MSI) 74 °C
Storage
931GB Seagate ST1000DM010-2EP102 (SATA ) 37 °C
223GB Force MP510 (Unknown (SSD))
Why am I getting such low fps?
did you find it
single channel memory, super low ram speed. xmp or docp not enabled
why do i always get orgin failed to startup
when im trying to go online
(Orgin did not start correctly)
I'm a bit of a novice when it comes to hardware. So I need to upgrade ram could you recommend something? Also what is xmp or docp? Is there a way I can get this game to run smoothly without needing to upgrade parts?
Sorry, I am not too great at 2000 series amd
idk if ur mobo supports faster ram. etc
but running dual channel, have same 2 sticks of ram populated at slot 2 and 4 usually and enabled xmp/docp is the best way
can accommodate up to 64GB of DDR4 RAM at speeds of up to 3200 MHz when overclocked
is what my mobo can do
Will that fix my issue do you think?
is it just the ram bottlenecking or something?
i need a pc guru
thats my guess as u have single channel ram at stock. However I haven't tested BF4 for years.
it was running fine on my old PC which had i5-4690k, gtx 970 and 4x4 1866mhz DDR3 ram
sorry i meant bf 2042
bf4 runs fine
oh lol then yes u are both cpu and ram bottlenecked
2700x is kind of slow now and ur ram is also bottlenecking
Ok well if I upgrade the ram will I be ok or not?
on low settings
It says my game can run with the mobo i have
not too sure as I havent encountered the performance of 2000 series cpu
however if u upgrade ur ram and enable it at the rated speed u should get a huge performance boost
exacly how much idk
Ok I mean im getting like 30-40 fps which is too far off getting atleast 60 which I would expect should run the game smoothly
I know 3000 series amd get around 90 to 90+
Unfortunately can't afford to upgrade too much :C Ram is about as far as I could go just now sad times. Might not be able to play then
Hardware Unboxed did a video and showed 128 player conquest he got 79 avg on 2700x
oh cool do you have a link?
also is there smaller game modes than 128?
thanks
yeah hes got a lot more ram than me
better gpu as well but the gpu should be fine
that i have
A new cpu will probs be atleast $350 I don't have that just now
I'll just need to wait a few months haha
thanks for help guys
Some of us don’t have all the time in the world to game and wouldn’t blow 350-400
for an RTX 2060 would a 1080 or 1440 monitor be ok?
1080
need help with my steam
I bought something the money came of my bank account
and now I dont have it
I really wanna punch my monitor right now because im that angry
contact their support
doesnt fk help
yes it does
Can somebody help me fix gpu utilization on BF 2042. Its at 40%
You need CPU to drive GPU
NVIDIA RTX 2060 12GB, more than a just memory upgrade We received new information on the upcoming RTX 2060 12GB graphics cards. As it turns out, the soon-to-release ‘upgraded’ RTX 2060 model is said to feature more than 1920 CUDA cores. The card that is now known as RTX 2060 12GB is now expected to […]
More cores than regular 2060 and double the VRAM
Close to 3060 performance
vram makes no sense to me on a mid-range card. Not gonna be playing 4k
why are they even doing this though ? like why make a 2060 12GB lol
is it supposed to be some sort of budget edition ?
cheaper process node with some manufacturing capability vs Slamsunk
I have the minimum requirements for the game but getting 30-40 fps in conquest mode, all low settings. How can I get 60 fps? Gtx 1060 6gb, i7 3770k @ 3.50ghz
Reviews say my graphic card should run it atleast 60fps?
I have pc gaming gtx 1660 super gigabyte amd ryzen 5 3600 16 gb ram I have drops fps do u have solution fixed
problems is the cpu
also how many gbs of ram
16 gigs of ram
and also since the needs stoll needs optimisation its very very heavy on the cpu
thats why
And cpu says it's atleast past minimum req
no thats under minimum iirc
Oh? Canyourunit says it checks out
Only thing it said I didn't have for minimum was 100 gigs of disc space but I cleared my games and have 150 gigs free
minimum intel is i5 6600k
yeah only check ea website
thats the only way to know for sure
I'd think my i7 would make up for the lesser generation processor
thing is that cpu was released in 2012
It's the best processor my motherboard is compatible with :/
also check cpu and gpu usage while you play (you can use tools like rivatuber overlay or nvidia overlay wich is already installed with geforce experience)
you can google how to do that
if the cpu has a way higher usage than the gpu then its a cpu bottleneck and like i said the problem is the cpu
i mean i would consider upgrading ... at some point
Yeah I'm planning on buying a whole new system
like a motherboard/cpu/ram upgrade
Only way
alright
Hello everyone, did any of the owners of AMD video cards come across such a problem that Radeon Software does not see BF2042?
do you have the latest driver that supports bf 2042?
Hello, i am having a directX function pipeline library unexpected failure error. Does anyone know how to fix this?
yes, version 21.11.3
use ddu in safe mode then install latest driver for your gpu (amd or nvidia) try that
I have pc gaming gtx 1660 super gigabyte amd ryzen 5 3600 16 gb ram I have drops fps do u have solution fixed
What is ddu safe mode?
ddu is a programs that lets you uninstall gpu driver and you need yo use it in windows safe mode, most of the time unindtalling and reinstalling the gpu driver can fix bugs
I have pc gaming gtx 1660 super gigabyte amd ryzen 5 3600 16 gb ram I have drops fps do u have solution fixed
and im fucking pissed cause of that
i was getting like 100-110 fps average, now im getting 70-90 (most of the time below 80) with drops to low 60
Thanks bro I’ll try it out
Hello everyone
hi
Please help I haven’t been able to play the game in weeks. Everytime I press A to start I just get stuck waiting on “Connecting to Online Services” and nothing happens. No errors, just waiting and not being able to get past it. I’m on Xbox Series S and have already put in a report but nothing has come out of it.
u try reinstalling?
11900k at 5.2Ghz all core, 4.7 cache, got a custom cooling system for the cpu with liquid metal for a thermal paste replacement (360mm worth of rad space just for the cpu), 128gb of cl14 3200mhz ram, an overclocked 3090 kingpin with a 540w power limit, 2 980 pro 2tb samsung nvme drives, motherboard is an asus maximus XIII hero, 9 corsair QL120 fans at max speed (1600rpm) (the pump i use is a XD3 Pump/Revivor combo that runs at about 4500rpm) and the case i got is a mid tower MB530P from coolermaster, the power supply is an EVGA 1600T2 power supply and i got custom cables made from cable mod
i could give you more models, like the model of my ram, actually that's about the only thing i think i left out
do you have a 8k display?
lmao
Hmm i got a new cpu cooler, my cpu temps are way down but now my case is extremely hot. I assume its the hot air moving from the new cooler, should i worry ?
All temps are fine, its just the case
depends, that most likely means case is filled with hot air not getting very proper vrm cooling but should be fine if you have lower powered cpu
I have 2 fans in front and 1 in the back
3 fans front, 1 back
Guess theres nothig to evacuate the air
might want to move the one front fan to the rear-top side of the case as an exhaust to neutralize the air pressure thing
How do i knwo which fan is pulling air and which is removing it @vapid estuary ?
fans do both, air flows from the front(side with no grills) to the back(side with grills)
The front ones are covered with my case
this is the back side of the fan
if u think its not getting enough airflow you might wanna get a new one
4K
I highly doubt that the generation of cpu matters that much, besides directX says it’s a gpu error and even if it was because of the cpu then that’s on the game company for not supporting an entire generation of a mainstream cpu company
But it’s not a cpu error and I overclock the fuck out of this cpu
A new what
Case or fans ?
disable discord overlay that causes directx error on call of duty so i think it might help with that as well
What’s your point? good job you went amd, very proud of you but that doesn’t help my situation at all with a software error
It is disabled
do u have any crypto miner open?
not while I play
hmm
I completely disable it while I do anything else
nono do you completely close the process or just pause
then idk what else might help,, sorry
It’s alright
it’s just weird that this is the only directX game that I have this issue with
It only crashes every few hours so it’s only an inconvenience but it’s still disappointing and annoying
yeah, custom water loop and all
The only thing I didn’t do was water block my gpu but it has a hybrid cooler with a 360mm rad anyways so it doesn’t matter
have u tried these
Thanks, some of this might actually work
yw
i turned down the gpu core offset by 10 so from 70 to 60 and it's fine now
but that's a really low overclock for this gpu, temperature and voltage/wattage, this card can draw like 1.2V and 540W at max and room ambient is about 15.5C and considering that the gpu radiator is the intake for the case and it's a 360mm radiator with 6 QL120 fans at max speed (1600rpm along with the hybrid fan on the card running at over 3000rpm, also the side panel is off with an external usb fan blowing air into the case as well) it is a LOT of power and thermal headroom, and this is far far below what my normal overclock is stable with every other game and even heavy benchmarks like 3D Mark's Port Royal, i can normally get like 120 offset on core, the fact that i have to run my overclock at half to play this one game is unacceptable and it's a problem for this game and these game developers specifically especially when this game is so poorly optimized and runs like dogshit that even an overclocked 3090 like mine can only get on average 45-60fps
540W at 1.2V
You using Galax HoF?
you heard me correctly, it is a 3090 kingpin using the LN2 switch on the PCB
Oh dang.
Nice. I draw around that flashing the 1k galax bios
i could use the 1000 kingpin bios but i don't trust it for games
Wait how are u at 45-60 fps
i've used it to break personal records on 3D Mark's Port Royal
if i run higher overclocks then the game crashes with Direct X errors
U running 4k ultra or smth?
i'm also running the game at 4K Ultra with Ray Tracing
Ngl same. I pass 140 port royal and timespy, 120 in 2077 but only 105 here.
Newer the game less the overclock. Inb4 a game crash in stock 
i can normally run 120 across the board, Port Royal and 2077
but this game
nope
direct X has a problem with higher clock frequencies
as can be seen here
although
other direct X games i have do not have this issue
Yeah

skip to 11:14 and Jayztwocents shows the issue
and other players in game have said that DLSS can make it even worse
although i've had an idea on how to maybe fix this
LTT made this video https://www.youtube.com/watch?v=IXir0Y86N84 about a thing that lets you "update" or downgrade a DLSS version used on a game, i'm thinking that maybe reverting it to an older DLSS version may fix it or maybe try reinstalling the current DLSS implementation
i haven't tried it
but it's a hell of an idea
might work
I tried it before, it actually works. Now, I just manually update DLSS for each of my games that support it..
thanks for the confirmation
oh! I do this on 2077
which version works for u?
For Cyberpunk? I remember using DLSS 2.2 but yeah I don't play it anymore. Now though for most games, I'm in the process of updating to 2.30. Works great for the games I've tested it out so far.
I mean 2042
have you tried it on 2042 or have a version that works for 2042?
2077 I use 2.2.15, I tried literally every other one up to 2.3.3 and they all look worse
if you're not at 4K do you even have to use DLSS or are you trying to hit a high fps for a high refresh rate panel?
I like eye candy + high fps haha
Oh my bad lmao. I haven't actually tested it for 2042, since I'm so CPU bottlenecked that I didn't even bother lmao.
2042 uses 2.2.18 looks like
i like eye candy, that's why i got a 4K monitor, although my monitor is also like 60 inches
it's a TV really
battle eyeballs is not gonna yeet me right?
pixel response time on this thing is ass so there can be some screen tearing
doubt it
i think i'm going to try upgrading DLSS too
any word on fixing the SMT Bug with 2042?
SMT bug?
have to disable SMT on multiple machines for any performance... SMT on, GPU is 30%, CPU is 30%, disable SMT, GPU is 90-95%, CPU is 70-80% -- was getting 50fps at 1080 on low with a 3090, now getting 100fps at 4k on ultra with SMT disabled
Oh wow I've honestly never heard of that. I thought it was just the game having problems with CPUs in general.
if you have low performance with low cpu and gpu, flip smt off and try it
i bought 5900x and i have nh-d15 cooler is that will be enough?
Yeah
For sure
That chip doesn’t run that hot compared to something like a 5800x
And you got the best air cooler on the market
whats smt?
Simultaneous multithreading (SMT) is a technique for improving the overall efficiency of superscalar CPUs with hardware multithreading. SMT permits multiple independent threads of execution to better use the resources provided by modern processor architectures. -- AMD's version of Hyperthreading
Hey
helo
UEFI/BIOS or Ryzen Master
thx
so its more preformance in bf2042?
but does it lower preformance in other games?
depends, if you're seeing LOW cpu and gpu usage in 2042, yeah it will probably help greatly. other games, depends on how much of your CPU is used -- disabling SMT will cause extremely multithreaded applications to lose performance
@thorny bridge your ram is abysmally low -- is this a pre built? do you know what ram you have? you need to enable the OC profile for your memory to run at its rated speed
Used ram 300 mhz
lol there is no 300mhz ddr4 -- if you don't want to fix this fine
is 80% cpu utilisation and 99% gpu utilisation good enouph then?
@marsh gull oh yeah
prob meant 3000mhz ram
thx
Yeah ddr4
@marsh gull i figured that but if they can't be bothered to pay attention... i was trying to help in DM and they told me they had to go to bed...
fair enouph
as i said. run cpu z and get real numbers on your ram
i wouldn't trust the task manager memory speed...
did you install bf2042 to an external usb hdd?
did you Install 2042 there?
Yeah
yeah expect trash performance...
lol
I have trash performance
uh huh, you installed the game on an external usb hard drive... what did you expect?
is it a small 2.5 inch one too?
External hard drive
Avoid that if you can
put the game there instead
Okay
hey does anybody know how to fix the up button pressing by itself on PS4 controller?
i replaced the conductive film already
Probably just buy a new one mate
4x8 ram or 16x2? and why
depends on what you're putting it in... but normally the fewest, fastest is best.
16x2 if you want to add more sticks in future
But it doesn't really matter otherwise
Unless you want to fill it with rgb ram for looks lol
if you have a quad channel cpu and board, use 4, if it's just dual, use 2, if you're looking for max oc, use 2. 2x16 is more energy efficient... also have rank considerations
@thorny bridge just post the link ffs
Ram barely use power anyway
And if you were going to do ram xoc you wouldn't be asking in the first place
I don't know
@thorny bridge try disabling SMT or get a bettery GPU
What do you need 32 GB for anyway
@quick locust lol https://imgur.com/gSyBIGa
Send me photos smt
@thorny bridge it's a setting. disable it in your uefi/bios or with ryzen master.
because 2042 has a bug with SMT enabled
Working yes or not
What?
More cores than pixels in that image
@thorny bridge do you see a setting that has the letters S M and T together like "SMT" ? no? keep looking
i'm struggling with you to give you worse performance... /s
99 fps possible
on a 1660 at 1080 on low? maybe
does anyone here know how to limit fps in bf2042 ? i tried rivatuner, nvidia driver and vsync nothing worked
to what? vsync should limit it to your refresh
to what number do you want to limit it to?
i run 180hz
it runs Over 180fps?
yes by a lot
but i prefer stable fps so i want to cap at 200
nvidia control panel fps limit works for me
isnt there a frap cap in the game?
no
curious what hardware and settings are giving you Over 200fps
i used the ingame fps thing and read the wrong value -_-
fps limiter through control panel works now
checking real fps now xd
menu fps doesn't count lol
ye ofc not xd
good thing is: fps limit works bad thing is: game runs just as shit as everyone says so you dont need to limit fps xd
seems like gsync helps quite a lot so my eyes dont die with only 120fps
how is your fps over 200
at low rtx 3090 1080p?
read more than 1 message
The SMT thing only seems to benefit lower end hardware right?
i read minium
U can prob get around 200 fps average, but ur overclock got to be mad.
i have to
what is the point of this channel
technology
On a 3080 at 1440p there’s about a 6 fps difference between ultra and low, in my case anyway
So I’d just stick with ultra on high end hardware
its not about fps, its about frame times
check the difference between ultra and low with those
We out here with a stopwatch measuring frames 
lmao

i dont have 1050ti
whats ur fps with 3080 1440p?
lol
you have amd card thats so normal then
u care fps and 144 hz monitor
why dont you buy 360 :/
sad
Entirely depends on where I am on the map, amount of enemy players etc, usually between 80 and 110, can get up to 140 if I’m very far from combat
Did upgrade my 3600 to a 5800x last week and it boosted my fps by like 30
wow good chooice
i bought 5900x
was bottlenecking 3700x
they almost same
Since the game seems to only utilize up to 8 cores
actually bought for mining :D


HZ is terrible
exactly, no way to play this properly with randos
hello when i was trying to open my game it said 'the operation was blocked as the process prohibits dynamic code generation' how do i fix it
have any tips for low gpu usage with ryzen 7 5800x + rtx 2080 ? In CQ and HZ have only 50-80% gpu utilization, and random fps drop
hi
the game is heavily CPU-bound due to 128 player servers
i dont have cpu problem 😄 my problem is gpu utilization is very low atm.
I'm not saying you have CPU problem. I'm saying that the GAME is CPU-bound, therefore you cannot reach gpu utilization that high.
check this 72%
I don't know about anyone who is reaching constant 98-99% gpu utilization all the time rn.
hmm, for me cpu utilization around 40-60%
I suggest you check out this video, he explains that cpu-bottleneck pretty thoroughly there.
i check
Atm there is nothing you can do about it. All we can do is hope that devs will figure something out with that 128-player madness that is hammering even the best cpus on the market.
Anyone else getting 30-50 fps on a decent system ? I'm playing on low to medium settings and the performance is still pretty bad
game is cpu bound, settings and resolution hardly matter
hmm, I have a Ryzen 5 1600. A few years old, but still handles everything else well
At least Ryzen 3000 series or Intel 8th gen recommended for enjoyable framerates tbh
Yeah, a new CPU will definitely be my next upgrade
Game just isn't optimized that well
yeah, hope they fix it soon
Bf3 portal maps runs fine though, around 60 to 80 fps so that's kinda weird
i really dont think the game is unoptimized, or that there is a "fix"
Thermal Grizzly: https://www.thermal-grizzly.com/produkte/358-kryonaut-extreme
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
Buy relevant products from Amazon, Newegg and others below:
Intel Core i9-12900K: https://geni.us/xEZFptS
Intel Core i9-12900KF: ...
maybe one thing to add: "cpu bound" and therefore low/not 100% gpu usage doesnt mean that the cpu has to be at 100%, the game doesnt use the whole cpu (if its something good) so it will never show up as 100% in task manager
hell, i think its easily arguable that halo infinite is in a much worse optimized state than 2042 when you actually consider whats going on in the game
halo infinites 4v4 mode gets 10 more fps compared to 2042 128 conquest modes on my system
I cant delete my cache in C:\Users\USER (im not putting my real user here lmao)\Documents\Battlefield 2042\cache
I am trying but the folders ain't going.
make sure everything is closed game, launcher ...
I will close origin
kind of is badly optimized since they even gone out and said following updates will bring us better optimization
halo is also in beta
so do keep that in mind
almost every game comes out with better optimization, this isnt unique to 2042
really doubt theres going to be drastic performance increases, i sure hope because as of now its kind of laughable that a 4v4 arena game gets similar fps to a 128 all out war game
so a while ago before 2042 come out i went to play BFV, i went to origin, clicked play and the play button just went to a dark orange and didnt actually launch the game, fast forward a bit, im now trying to re-download BFV and i cant even install BFV anymore due to this bug
the game just says preparing and doesnt actually give me a download location option
thanks origin, its like they dont even want me to play any BF game at the moment
has anyone had this bug before and possible know a fix for this ? it would do me a hugeeeee favour
uninstall origin and reinstall it
but before doing that
try to clear origin cache
(you can google how, there s a page on ea help on how to do it)
i had to do that everytime i wanted to launch my BFV when it wouldnt launch
i will try and reinstall origin though
is i5-12600k worth watercooling?
depends

if you want to overclock it quite a bit then yes
but for the i5 even a noctua nh d15 can cool it
the problem is the i9
I get the same frames running ultra 1080 as running low with ultra performance dlss lmao.
dlss can actually reduce fps sometimes when you re very cpu bound
since the game renders at a very low resolution
while higher resolution more gpu bound
oh lol
nh d15 can handle even an overclocked i9
no


