#Crimson Desert - CHECK PINS FOR ADDON
1 messages · Page 29 of 1
oo
What’s the lantern mod you’re talking about?
I forgot the SDR black crush fix with framegen 
is this with LetThereBeMoreLight or without?
that would be "morelightsmod" something but you should get the adjusted one wron winter
yes with, the one that lazorr mentioned above
oh my god, I just noticed that they have flower patches, but within the flower patches the flowers are randomly generated
within like 10 feet
Does that look good or bad
#1469072401450012774 message
Huh? From who?
Ah ok
Are there install instructions
here
in the pinned message
That looks fine
ive noticed something like this with rocks some rocks too that spawn close up
New one here #1469072401450012774 message
yeah those are all procedural
just drop them in the game dir, overwrite (make a backup of these files just in case)
does the camera mod actually work for anybody? i wanted to get it closer towards character but even the closest one it's still very far for me? like no difference
any updates since winters adjustment?
so funny watchign them pop up as you run towards them
shader toggler (no hud mod) turns that off if you want
i've heard, but that looks too complicated
it does, picked the 1st preset (w3/rdr2)
i'd say you're not missing out on anything by turning that off. they literally pop off only 2 meter away from you
its as simple as reno
dos it remove the little bits on the road in town too that pop up like 2 ft in front
i'm really not sure it's working for me. i tried 2 after 1 wasn't close enough and it seems as far as the original
i looked briefly and it seemed like you had to decipher code to figure out which shader corresponded to what and make groups, or something. didn't seem worth my time.
it pretty much deletes only stuff that appears right in front of you (2 meter radius)
nah its mega simple i'll show you the ui let me load into the game
oh mb static camera has to be checked as well, so it doesn't zoom out when you are running, riding a horse, etc
Yes it does!
oh don't worry about it, its not exactly a huge issue and I just loaded the game up mysef
nah I was trying to do other stuff
Ok this is the one people are using for a better lantern?
Kinda worried about everything else it does
I just want the better lantern. Not every light to be brighter
have you checked improved fovs, maybe that's what breaks it? i'll try with no fov
game looks good now
Yeah I like the darkness. I’m just worried everything else will make it too bright now?
chill i've only set it to 5.5x 😭
its only for using with reno autoexposure setting to make the lights more prominent
that grass though
i did, picked 2nd one iirc (the one before the recommended option)
Aren't I suppose to Axiom punch this?

idk if it needs to be retuned with new version
I need to modify their grass next
well except that
Ok will give it a try
i'll try RE9 version now if this doesn't make an impactful change idk what will
I swear I put a mod in that folder earlier tho
its slowly approaching...
Lurker here, just wanted to say this latest Reno by Forge combined with the light mod by Lazorr is excellent
Nights look great so far and everything else obviously as well. You guys have put an insane amount of work into this.
please do
don't forget Jon!
Never forget jon
Thanks Jon as well 🤝
is this how RE9 camera mod is supposed to look like? idk if this works...
the mod doesn't change that you can change FOV with back/select/options
that's the furthest back camera
I keep seeing this comparison and i think it proves the point it's trying to shit on. You don't have to touch those levers to move it
you mean it doesn't change the distance?
i want camera to be closer
Closer than default close?
defaul is like extremely far
You can zoom in
just hit back/select until you get the distance you want
really? how? (controller btw)
the back/select button - the one opposite of start
I only know on the ps5 controller you can click the bar. Back select button makes sense
Is there any reason to actually play as Damiane or Oongka
There's like 3 distances - far, close and first person. Just can't do combat in first person
Damiane at least has her own quests. I assume oognka does too
i had no clue. i really want the camera closer
Hit the select button
this is what mine looks like with the RDR2 camera mod and 60 FOV
yeah I just changed a couple numbers and endured suffering (well and also published the original game unpacker so there is that), but all this work has been Jon Forge and ShortFuse
is the XP shared? inventory seems to be..
Inventory is, health stamina and spirit are. But skill points are individual
ok i deleted the mod so i get a sense of vanilla again, and let me find that button to adjust distance
If you use a skill point for kliff you don't automatically get one for damiane
Gotta split them up
no ...
I just really like Damiene's kit a lot more than Kliffs that is, I would raelly prefer to main her instead
They have their own quests!
Damiane has way more fun grappling
Play as her for awhile and summon kliff like it's a party
yea and those don't count towards completion
then in some chapters they are outright unusable
actually most of them
lmk if there is any weather that needs changing cause I found out how to change all of that
damiene and oongka I have a feeling is added last minute cause they feel like they need morep layable characters
best way to use them is to summon them for fights
treat them as companions
you are installing it with the .bat right
yeah
omg i didn't know the share button was change camera 😂
30 something hours in
Clicking the top bar thing for camera is nice on ps5 controller
I'm an old man and I just say select for all these stupid button names they have now
yeah like why would i ever press that button i forgot it exists
ok so this is the closest camera option unmodded, it's pretty much what i wanted. i wonder what does mod even change at this point. this is still vanilla looking right?
DLSS balanced can actually look good now with RCAS
any good mods on nexus yet?
i only use the CDCamera one
if anyone is using a controller with hall effect sticks the steam anti-deadzone setting works great to remove the game's deadzone at 5500
the new modern controller looks interesting
yep that and font changer and glide stamina tweaker
bro tryna unga bunga with oongka
This isn't Game of Thrones sir
This is a family subreddit
By the way the new Alternative Auto Exposure looks so much better!
im crashing on reshade load on startup with new version
If people could share screenshots of what their most deep fried scenes look like with the new auto exposure, that would be wonderful
im trying to figure out why now
Me and forge are still at the starting town
ye, and I can change all of the weather now too
time to try and unfuck dusk and dawn perhaps
So what settings do you recommend now that "recommended" turns a bunch of shit off?
don't know if it's something I did but using the latest version I'm getting some weird occlusion
It's just the reset buttons or w.e recommend having them off or something?
just perfect night
https://www.nexusmods.com/crimsondesert/mods/1?tab=description the parallax option from this mod make a huge difference for ground detail
This is not normal DLSS behavior.
Shame it's not, since that's my biggest gripe with DLSS. Needs considerable blurring before the artifacts go away.
What settings are you using here?
The recommended settings drastically improved night time imo. The previous versions Auto Exposure was way too dark, but this is gorgeous.
if u turn reno off does it still do it?
In a pinch if you don't have RenoDX to turn the game's sharpening off, using a DLSS level below DLAA would help.
Thank god.
rofl, what?
The game has DualSense buttons out of the box.
I haven't tested daytime or interiors with the new version yet, but this is exactly what I was asking for last night for night time.
Game looks blurry for me... with 0
RR on Balanced
It’s probably broken in HDR honestly
They run it on the pq encoded color while in Sdr it’s on srgb encoded
turn off steam input, you don't need a mod (if you're playing with your controller wired at least)
last build with LetThereBeMoreLight
Just perfect, thx for your work
I dont know what RCAS is... xD
How do I turn that on then?
that RCAS sharpening goes a long way to fixing the blurriness
How can I tell if RenoDX is actually working? I'm running Special K along with ReShade and RenoDX as plugins...
Move a slider? 😛
the slider in current reno
Why are there no luminance sliders in that screenshot?
SDR perhaps
only if you're wired
When I do that, nothing happens lol
SDR mode
This new version is great!
obviously i'm wireless so i need the mod
Works wirelessly on Epic.
Valve breaks DirectInput support for DualSense and DualShock 4 controllers wirelessly.
Ahhh I'm blind. I could have sworn is wasn't there before pressing reset all.
there's a hack with DS4W but that's too much lollygaggling
It's such a big problem, I had to write this.
https://github.com/SpecialKO/ValvePlug
Before ditching the cesspool of a store altogether.
They break input device support system-wide for PlayStation controllers, making them less functional just by having the Steam client running 🙄
Kliff looking cool, meanwhile mine looks like a jester
Those LODs look a lot better, how did you do that?
It was special K acting weird
I was only using it for AF and negative bias
true and it's quite inconsistent as well. sometimes i just have to get my backup xbox controller
lol the mod managers "splash screen sample mod" epik paintjob skillz
these archery contests are driving me mad
Thought they nerfed them
they're still kinda nuts
They were prefiring and locking on when I was doing it that was crazy but that was before the update
What's everyone got dark power set to?
is there a modding solution to DLSS blur?
I guess i'm that bad. controller its so easy to overshoot. mnk feels awful and half the time smashing left click to shoot nothing happens
45 looks pretty good for me
the rcas sharpening in reno helps a lot
are you using RCAS in the latest RenoDX?
https://www.nexusmods.com/crimsondesert/mods/171?tab=description
this is my favourite controller mod so far. it decouples jump from interact and doesn't seem to break anything combat related (your force push is on LB+Y now instead of R3 which sucked big balls anyway)
LS: One-click Sprint
B : tap B to step dodge, and hold B to roll
A: Jump / Glide
X: Interact
RS: Target Lock-on
D-Pad Down: Crouch / Slide
LB + Y: Skill Force Palm (劲法)
TIL Kliff has a helmet when he flies
rcas even did what I thought was impossible - making smoke actually look like smoke
I tried it on mouse and had so much fucking mouse acceleration I couldn't handle it
@warm magnet no hud fix from nexus but its not perfect it give me some artifact line going through screen in some place
yeah, i can't believe i'm getting my ass kicked by a robot.
hello im new here sorry for asking but where can i get the mod fix for hdr? i heard its here but im too dumb to find it
check pins
get the hdr mod and the lighting fix
Did the new lettherebelight update change anything or was it just a reupload from yesterday? Missed the back and forth on it before it was posted.
I have to say the story in chapter 1 was so ridiculously bad I was tempted to drop the game. I'm not saying the story is good further into the game, but it's definitely not as bad as chapter 1.
the lantern
place both in bin right?
Oh the overexposure on the lantern when you point with it?
yeah
::
It's very easy to use and configure. just another add-on menu
no, the light mod specifies the folder and to back it up
aight thank you guys
this one?
my settings for anyone that was asking yesterday
this is easy?? lol
do you play with sunglasses on
must be an outdated version of Reno? sorry outside my wheelhouse
looks gud to me
god damn those daytimes are bright
wym lol
yeah man thanks I'll look around
Indoor looks good. Outdoor is a nuclear event
I just got flashbanged
lmao maybe it's just my monitor
Hey Guys is DLSS 4.0 still better than 4.5?
I don't get any clipping in the daytime
4.5 had some bugs
Relaxing
here's a raw .jxr of the daytime
if you are using ray reconstruction it will be dlss 4 even if you have 4.5 selected jjust fyi
im still crashing with thenew reno addon, anybody else crashing or figuring out why?
lmao
ahh that's right
Thats still really bright
yeah its just as bright from that image you just sent
I literally cannot view that. its clipped to hell
forgot about RR overwriting with its one upscaling
What is your peak brightness @subtle sinew
same screenshot exposed to my phone camera
my monitor does 2200 nits
game brightness 500 hahaha
lmao
something is wrong with your monitor
yes it's too dark without it lol
2.0 exposure and 500 brightness
I like me a bright game
that is legitimately nuclear bright
something ain't right in the pipeline there lol
I wish there was a way to get this kind of brightness at night/indoors, but still have the daytime brightness intact.
Speed running burn in
so its safe to assume if i use renos AE then i should use the candle/fire fix that lazorr posted
it's a mini led
to help with interiors
yez
has to be a miniled
Just a dumb joke
bro i'm here with same display and running 150 game brightness 😭
5k nits on AVP and my game brightness is excruciating at even half that. That’s wild. Only got dark screenshot last night unfortunately.
@obsidian locust thanks again for the tips on SKIV earlier today. Only thing I wish there was, and maybe there is and i'm dumb, but a way to clear the current image without closing and reopening (since i'm trying to emulate snipping tool with keeping it running all the time)
i will never understand the 500 folks
that is like 8x higher than one of my screenshots average luminance lol
Christ
what the fuck
does RenoDX do anything about the night sky being too bright? I'm guessing that's not possible...
Looking good
Alternative auto exposure makes nights dark
Sometimes QDOLED with 1000 nits peak which rarely comes close on more than a tiny part of the screen is way too bright for me. I can't imagine staring at a monitor much brighter.
sorry, new guy. I don't know what that is
Is improved RT a no go?
I'm on an Odyssey Ark it's rated for 1000 nits but I pushed it to 2200+ in the service menu
light up my whole room
This chat lmfao
Iss it possible to make nights and indoors brighter but keep the current brightness for daytime?
It's a setting in the new reno update
in the settings, there is something like if you press Esc, it doesn’t quit the program fully but keeps it in the background, i use that myself
for now
Damn the nights with this are so dark
Inside of renoDX menu, at the very top if you switch from simple to advanced
There will be a setting titled
Alternative Auto Exposure
holy shit can yall put spoiler warning on tthese, im getting flashbanged left n right in this discord
@crude marsh For now? Are you working on something similar to U+ for this game?
I am progressing on modifying the weather
Odyssey Arc ain't that bright lmao
Whole discord out here looking like lobsters
some of yall monitors are fucked
It is with the service menu tweak
thank you!
bro it's the same guy's screenshots hahaha
I have a colorimeter that does 2000 nits and it read up to 2500
It also clips at 2200
I can't SEE
you right you right
Hi, do I need to activate RR or is it better to leave it off?
It's better to have it on
RR if you want some RTGI and reasonable interiors
@warm magnet skills issue 😎 😅
I'm using YOUR settings how can you see like this
By using the lantern
hold up this archery wins 3x in a row is a main story quest? welp, i'm screwed
Just auto expose your eyes harder 😂
You can just leave
@warm magnet Is RR on? I cranked the Dark Power setting up at the darkest point of night time so I could see a bit better.
It used to be so much worse before the patch bro you got this
Clear in what way?
yeah I have RR on

@viscid wedge if you get the slow down time skill for the bow that helps a lot btw
Try cranking that dark power setting to max
okay
I just cranked mouse acceleration to 100 and treated it like an FPS game
I think I'm almost done with pailune
close the currently open image, so when I bring it to the foreground it doesn't always have open the last image
thanks god
oh damn, i do have a spare point, hopefully it only needs 1
Its just as dark
is there any option to make auto exposure brighter ? i play with hdr
Yeah I think it is just 1
strats, i'll give it a shot
not sure if I see any diff between dark power 75 and 100 but still use 100 and exposure 1.15 👌 looks now better in the dark. Thank you 🙏
Not sure why that matters, but you can go back to the normal state by pressing Ctrl+W.
Maybe another setting? Or some type of monitor setting differences idk.
@warm magnet use that lantern ahah
why are the light sources still dark for me?
You can also snip from existing screenshots, if you hold Ctrl+click and move the mouse.
If you can't get auto exposure to work the game still looks great with it disabled. It's just daytime 24 hrs a day.
okay yeah thats better
ahh, this is it. I've got one of that guys blown out screenshots in it and it was killing me lol
Where are these variables?
cause they have like 40 light sources and we need to hand tuned all of them
oh make sense
why did reno dx nuke my reshade shaders 😂
I had that happen in Nioh 3. I didn't really bother looking into what caused it though...
my highlights aren't blown out I swear 😭
welp, i couldn't find it. I spent it on the main marksmanship skill thinking that was it since no other archery skills mentioned slowing down time for bows
your monitor is compensating with something
cause otherwise your eyes would be dead
@warm magnet you said you deleted all your shader
are any of you actually playing or ... u guys just tweaking graphics all day
bro got built in UV Goggles
we don't wanna finish the game in a week!
dont ask this question
You seem to have added a quote or backtick to the end of the path
Just trying that latest build with the exposure and moon fixes, and the brighter lights files, holy shit what an improvement over the vanilla game
not much to tweak tbh i just use reno and lights fix and play the game when i have free time, i’m only on the end of chapter 3
No I didn't I installed the reshade preset that had selected its own shaders
your retinas are crispy my friend
Peak
I'm sure it can't do the full brightness at full screen and it doing some sort of abl
Guys I suck at duo
R u cheating
No I just suck
Cheat more
its one of the worst mini games in a game period. Almost as bad as gwint
Duo made me terminal
How
Not with the learned skill in game because the mini game is ass😂
OH IM DUMB there is a new build today
bring back dice game from KCD2
I'm just trying to get some money haha
one of the best mini games
Bring back dice from witcher 1
everyone is cheating in duo
I am convinced
hopefully tomorrow I can figure out a way to fix dusk and dawn
if you see them grab the sticks on the side, they are cheating
you can accuse them then
normally the sticks are grabbed from above
Is the interact reticle considered a light source?
I thought it was only when the screen slowed down
nah that was when kliff was learning it at first
Ooooh
Are there horse racing mini games at any point? WOuld be hilarious with how levelling the horse lets it drift corners like a car 🤣
Oops
Having your pet pick up loot is such a nice qol feature
That's what I'm trying to do haha
@wise flax Immersive auto loot
I am still trying to figure out brightness setting. win hdr app has me clipping at 1060 on step 2 and 3, even tried running with cyberpunk in the background, Monitors unboxed says 10% apl50 is 465 and 10% apl18 is 525. I dunno if im trolling but I think in win hdr app step 1 is 0 step 2 is 500 and step 3 is 300? and in game is use 500 for peak brightness and default game? running eotf boost peak 1300 MPG 341CQR QD-OLED X36
dog should bury it instead so you lose it, realism
USE FOR SHOVEL
My dog came home with an ipod one time so it's very immersive for me.
that day he became your dawg
flashback to old BDO days when pets were P2W
Depends on the dog, Husky would just ignore all the loot and give you side eye when you complained
That’s weird I remember seeing it somewhere, never used it myself though
Haha when my dog was a pup I let her run around the neighborhood with the other dogs. I had to stop doing that when she came home with that ipod. I never found out whos it was either.
If only the dog would auto kill the small critters then auto loot the small bones i need for refining rings, etc
@naive jackal I also wish I could slaughter animals when I grab them. Why can I pick them up if my only option is to put them back down.
I'm a bit confused... is it recommended to install the **LetThereBeMoreLight **mod?
watchlist
If you're using the exposure fix in the latest version
What you don't like slaughtering small animals?
You can pick them up and take em to your ranch
Ah I don't have a ranch so that makes more sense
I downloaded the latest RENODX file. where is the exposure fix file?
built in
there you go
I've finally won 3 games of duo in a row
gotcha. ty
yall can't bully me anymore I dropped game brightness to 400
doesn't that look way better?
It's okay if you changed it back to 500 after the screenshot 😁
Brother is simulating actual daylight via their monitor.
maybe press reset on your monitor and start over idk
it really doesn't look that much different
Plants could photosynthesize in front of that monitor
his eyes already fried. he cant tell
how else is the solar remote gonna charge man 😭
I mean his monitor is clearly doing some tonemapping itself or correction
Free energy XP
this mans calculator just stays on cause of the light coming from the monitor
Oh my god, you can actually open the dams and get the water wheel to spin + the whole mechanism is animated as well
cause if it was displayed with the true values then yeah
sorry for being dense, but can you tell if I'm using the custom autoexposure?
alternate autoexposure is set to on
It seems like it takes a sec for reno settings to kick in when you teleport and you get a flashbang as everything starts loading in.
i havent seen/noticed this
it's hard to say but this monitor does do heavy processing to stop blooming
I'll have to hook it into my s95f at some point
It started with today's update for me.
@subtle sinew Which monitor are you using?
Omg why cant people just turn this setting on or off
odyssey ark but with service menu tweaks to do 2200 nits +
its okay, we all have our dense moments , myself included
Seems like just going on and on and on about auto exposure
I'm not sure if it's the same thing since this is closer to a QN90A I think
I imagine the service menu on the monitors are different
Possibly I'm not too sure
I have a G85SD got it on a really good sale, it's got the samsung smart tv features which I don't use, was looking into a service remote to disable these stupid pop ups that you can't turn off
gotcha. ty
if it uses tizen os it might be the same yeah
Yeah it is Tizen
Hi I am completely new to oleds, hdr and such, wanted to ask does this mod completely overwrite the in game hdr settings, as in I dont have to do anything in that menu?
Set to default and don’t touch anything in game besides ui brightness
As far as hdr settings
just turn on HDR in game and reno will do the work
Ah ok so I reset the stuff I messed with to default?
With psychov, peak is controlled in the renodx menu and in-game exposure should be kept default
probably advisable
yes
You can set peak in-game to whatever you want, vanilla will still use that
On a 1500nits monitor had to do
Shadows: 75
Contrast: 45
Game brightness: 300
Game menu HDR Exposure: 37
To have a balance between day and dark indoors, default 50 contrast results in loss of information, cant see s*** indoors and at really dark scenes. My goal is basically 0 loss of info, any suggestions are welcome.
I also have a 1500 nit one
Just wait for lazzors fix
google maps looking ass lods
PG27AQWP-W? what happens when you set Peak Brightness to 800? The 10% value tested by RTINGS.
Donno why in screenshot looks bit more yellowish than it is but Im open for suggestion, I find it unacceptable to not see at dark what was intended by the studio to be seen
Yes exactly that monitor
I installed renoDX with the Commander tool, and it seems to be updated just fine. but I can't find RCAS. is there anything that I should install separately or an add-on that I should enable for that to appear?
because it installed an old version of RenoDX
you want the version in the pinned post. #1469072401450012774 message
I beed to test it
that monitors HDR values
should we even go beyond the windows hdr tool? 
plus ultra?
Ill try, for a long while I’ve waited for their review of that monitor
Tnx
oh, thanks :))
yeah rtings launched the review on March 17th, but of course its behind a paywall now
Yeah wow this looks great
Its an amazing mon all around
I haven’t pushed the code there yet, I will tonight
Holy does this look good when I updated the most recent file and reset in game stuff to default
Dumb question: why does RR make the game look more blurry compared to RR off at the same DLSS quality level?
Ok so tested it and image becomes bit darker
RR is doing more in the background and enabling a higher lighting setting than max so it's doing a lot more denoising work
Also you can't use dlss 4.5 with RR which looks sharper
Just need to figure out what type of contrast is best to adjust the adaptive one or the normal one
I lean towards the normal one
You can adjust both. As I understand it static contrast is just the difference between brightest white and darkest black. Adaptive contrast is contrast adjusted on the fly, so it will be harder to measure with a relatively static image.
Someone please correct me if I’m wrong.
Tnx noted
RR uses its own model to upscale, it bypasses dlss basically
They havent updated RR yet
this dude just called my mother a strumpet, I'm gonna end his entire bloodline
yeah they really gotta get on that
Yep Id rather have that than the 6x mfg thing
When I play adaptive contrast and slide it all the way to the left it results in grey tone, while the normal one seem to effect darker areas
what's that? you want dlss 5 real time slopify?
autoexp off \ on, this is the addon of yesterday i will try the new pinned one. hopefully the darker areas gets a lil brighter.
the moon is cool AF 👀
RR makes this game look 10x better + Reno DX + PBR fix
PBR fix? 🤔
ye what is that
Oh I'm stupid my brain went to physically based rendering
Its an effect in the no hud and effects mod that reduce the parallax occlusion it makes it look a lot better
Yes there is clear loss of information on the trees on the left
yeah it looks insanely good with RR and renodx but im having issues with nights not being dark enough still
Before and after on it
ahh
looks a lot better
I hope devs fix this
yeah giving it a shot soon I just wish the ground stayed the same it doesn't look as bad
I guess I should say parallax fix instead of PBR fix
Thank you
What is this from? You’re the second person to mention it.
its in the renodx advanced settings
Any more dark areas comparisons with new alt auto exposure?
that popodori village
with green lights
I learned about it just recently when I got an oled, was blown away in cp2077
figured out the nights holyyyy
will check the new addon might be fixed
Auto exposure fix is making my day look like this if I look up to the sky, what can I adjust?
It's also very distracting when I move my camera around cause the exposure adjusting rapidly, it's almost like flashing
Damn I didn't even realize cloth realistically gets wet
regarding variability of exposure across weather conditions
I am gonna clamp all the weathers to similar values, or try
@crude marsh any progress with a potential lod fix ? If doable ofc
no
this game really has some super cool outfits thanks to its mmo studio nature
🔥
in a ubisoft game this is probably gonna cost you 12.99$ or something and looks much worse
rn i am switching to things I know are tangible
Need to know where you got the gear
@crude marsh ya make sense you guys killing it
Its the armor set of the shadows with the dark marksman cloak and the odecks protector boots
got that flashbang sky
its early morning with no clouds yet
It looks better during the actual day
yea i feel like sometime i gotta adjust the color grading depending of weather
We pulling up with the FITS 💯
You want a comparison with exposure fix on/off?
yes
ok
I just didn't capture the cloudy parts was all
If those lod's were better, particularly the ruins in the background, that screenshot would look even better
ye
its not even using half of my vram
BDO had it even worse, I was expecting this game would have better lod ngl
some rain
why dont I see the extra settings?
what pbr fix
old version of RenoDX
This some assassins creed shit
check the pins
is there a newer one
oh ok thanks
its the parallax fix from the no hud and effects mod
so it did work
this one?
Thats a good mod
yeah
and then theres the parallax occlusion reducer toggle in there it makes it the textures look a lot better
pretty insane difference
do you have to do it everytime you boot up the game?
@fallen knoll its 1 button press
to toggle on\off
that's it
it does introduce some screen artifact in some area though but only had it once so far
Slice and dice.
playing without renodx just unthinkable now ahah look like shit on vanilla
those texures look crispy
Yo vanilla looked pretty bad already but after using reno it looks so much worse
@pure sundial i read that wrong at first 😅 but ya using reno made vanilla even worse
wtf was even that moon ahah
Baby moon 🥹
Wonder how to fix the bug that comes with the parallax fix
New to RenoDX and specifically reshade. Since reshade is injected to specific games .exe. If I decide to add renoDX to CD.... I won't get banned from any of my competitive FPS games (if their anti-cheat even checks) would I?
its not recommended to use reshade addon with online games
not adding it to any online games, just CD. Just don't want to add it and then all of a sudden get banned from any of my online games.
you'll be fine. Only matters if you're installing it on your online games
@eager epoch the weird line artifact bug?
hmmm I wonder if my settings are messed up. I tried using recommending + the light fix, but RenoDX seems much brighter than Vanilla HDR
Native HDR
If you're installing it for Crimson Desert it won't affect any of your other games
Multiple bright lines yes
does this fix overblurriness on fsr
RenoDX with recommended settings + light fix
@eager epoch yes i get those too but not everywhere so i just toggle parallax fix off when i get it
@jolly isle tweak the color grading slider
is light fix a separate mod?
@visual silo check pinned
yea in pinned messages
yeah see the pinned messages
its really great at night
I beat the reed man
thanks
ah i see ty
Im at him rn xD
ahh the moon is so pretty
Good luck! I think they made him easier
@jolly isle also they added RCAS sharpening with new reno dx thats all i adjusted in bottom section then you tweak color grading to your liking\screen
I had to put exposure down to 0.40 to match Vanilla HDR clarity and color (no grey/overblown)
seems like something is wrong
Generally it’s less bright, what are your ingame sliders set to?
So you only use renoDX and the parallax fixer? nothing else? it looks great thanks for the stuff
@warm magnet yea only renoDx the parallax fix and optiscaller set Aniso filtering to 16X and mipbias to -15
okay
for HDR?
450 NIT (Trueblack400) and 75 exposure with 50 UI brightness
QDOLED panel
whats optiscaler never used it before
Set exposure to 50
shouldnt in-game HDR be disabled with RenoDX enabled?
No
Hahahah
Some renodx mods work that way, not this one though
I like some lens flares but this game doesn't have the best, glad i can turn it off
whoops forgot to hide the hud in the first one
quite literally a day and night difference im not sure why they intended for night to be so bright
if normie gamers had to deal with darkness like that, thats all everyone would be complaining about
Yea I suppose that's true
Although I never heard of anyone complaining about the nights in DD2
Just beat the reed devil and tried the light mod... holy... Im glad im on pc xD
I tried searching but couldnt find anything relevent. when i use the sun improvement toggle the mountains in the distance do this. Is there something i can do about that, or do i just ignore it?
the issue rn is the enemies see you clearly in the dark
my headcanon at this point is that greymanes see better in the dark than normal humans lol
greymanes aren't werewolves
they arent but considering where they live its always dark
how have you almost finished already
similarly to badjaos irl where their spleen is larger than normal humans and last longer underwater
i got 70 still in first zone 😂
Where the hell you find cool gear like this?
the npcs in this game is racist, they call greymane by their tribe's name
im like 40h just beat the reed devil..
never their names
Got a bunch of those artifacts but put most of them into health xD
health is good, by endgame ur just spamming food button while spamming the attack button
because the bosses don't stop
have u done much side content?
I have been doing fetch quest for the entirety of today minus 2 hrs
hernand actually have more variety of good quests and fetch quests
... x.x the 2nd country is suffering
the reason why this game has so many graphics artifacts is because of creator intent, kliff is living a simulation therefore can't have perfect graphics
that's why we upgrade using artifacts
I get it nao
That's just the game being silly I don't think you can fix that
most of the lighting indoor is broken
hahaha I wonder if someone or pear abyss themselves are gonna fix the pop in only that and its perfect
thought it was still loading
Does SDR work for the mod or not? Was testing out for a friend and the image looks like this:
im like consistently blown away with how this game can look
yep with only 8gb of ram out of 16 for me
Is there a proper uncompromising close range pop-in mod / method?
nah pretty sure thats an engine issue
What I really wanna know, is there a way to make the raytracing/denoiser.. idk... stronger? Even at max it looks kinda blobby sometimes
Its just the rr limitation, they didnt update it to the new transformer models
damn
it overrides dlss basically/has its own upscaling model
that was weird. I happened to notice all the smoke was purple. The only thing in Reno I would have touched was the flame hue settings. I reset them both and we're back to normal but sliding them back to where they were, I can't get them to go purple again. spooky
OG PurpleSmoke
btw are you guys using RR preset D or E?
Only D
D
kk me too
(can't be bothered to change it)
D should be the same upscaling as dlss preset K but idk rly
sure doesnt seem like it
yeah I wish they update rr asap, much better time investment that the 6x dynamic mfg thing
Where can I find the RenoDX HDR mod? I don't see it anywhere?
pinned
i dont think you should get a dog on a whim
goat then, if I don't want to keep him anymore than I can butcher him
get an iguana or something
iguana is delicious
they roam the neighborhood around here, I kidnap one once in a while
speaking of I did see a bald eagle
With RR rain still looks nothing like what it did in the trailers and previews I saw.
I wonder if it's setting related
Itbworks fine without RR
their optimizations are last minute quality lowering cause it s crap
I think the consensus is that the denoiser is denoising rain
yeah for me it looks like a blurry mess
its not too dark anymore
But it looks fine without RR
Trying to install Reshade, but I already have an dxgi.dll file from optiscaler. Should I rename it?
how many of u have a 5090?
4090 poor here
yeah you have to
Check out optiscalers ini and look for reshade
try to remove as much as you manually did then simply use the installer
same, we're poors
@upbeat magnet 4090 is anything but poor, it s because nobody was willing to let their 4090 go for decent price is why I got a 5090 on launch day
out of spite

Trust me I’ve considered upgrading but I do not want to go through the retubing process and custom block
TBH I screwed up not selling this and only paying a relatively small difference for 5090 when it was at its low. That $1999 TUF deal haunts me.
soft tube makes everything easy
Hard tube here
Custom blocks, distro, etc.
so I went and get a 5090 instead
Also thank you to the person who mentioned cranking mouse/controller acceleration to 100. It made it feel way less floaty. Now turning Kliff is like turning a hummer instead of a boat.
i sold mine to a guy on discord for 1400
I regret not getting one tbh

I’m now in a position where I want to get a 5090 because transcoding while playing chokes the 4090
I wish twitch gets av1 and multi encoder support
I do local streaming and just over TS6
Rather than twitch
But agreed, shit no AV1
Hahah I wanted a 4090, couldnt find one new, 5090 wasnt in stock and I just got a 5080, gonna last me till 6000 series...
Kinda insane in 2026
Multi-faceted burn lol
Man it really is crazy how much less shimmering there is now with the Reno/mod updates.
I record locally to AV1 in 4K with these settings. 4090 barely flinches.
I’m streaming native 4k AV1, 10-bit, P5, 1G bit to AVP.
1G and AVP is referring to what?
lmao, probably your problem. AV1 at CBR 1000Mb/s in insanity, completely unnecessary
same!
I was just shitposting in my discord on the day 5090 releases, shitting on the microcenter liners
Network latency would be the problem but I have 10G local backhaul on my home net.
then I got one on launch online

wasn't even trying
same to the nintendo switch 2, I didn't even try
It’s mostly encode latency which is why I can’t go higher to P7 to remove artifacting, and im offsetting as much as I can with net but to a limit
tho 1gb/s is insanity
AV1 simply doesn't need anything like that for a 4K stream, thats kinda the whole point of it
Tbh the visually discernible difference from like 300+ is so minimal, I’m just trying to squeeze as much as I can out of my network. Biggest issue is encoding/decoding artifacts
Why P5? I thought P1 was supposed to be better/equivelant once you start pushing high bitrates
P1 has the least latency for encoding, but it introduces a ton of artifacts
P5 retains higher detail at higher latency
I could never tell a differnece, but I'm also doing like 500mbps
are you recording or streaming?
Moonlight streaming
Roughly 2-3ms at P1, quite noticeable artifacting, P5 rises to ~8ms but much less artifacting and compression
I couldn't handle streaming and encoding artifacts no matter how high bitrate is
I do notice the grass being slightly compressed looking maybe I'll try P5
so I get a fiber optic 20m hdmi 2.1 cable to my tv
Try P5.

Does it hit fps or just latency?
Are you using Apollo?
Ok yeah CBR for that. And yeah even 500Mb/s CBR is more than enough with AV1. P1 is what'll make things look bad, if anything
Moonlight
Vibeshine
Oh shit I haven’t tried that one. Not sure what configs they offer.
See if they have a full frame encode option rather than quarter or half frame first, try that. If you don’t, move to P5, but expect to lose some frames and introduce some latency albeit relatively limited
Encoding latency specifically
Like I said earlier I rose from ~2-3ms encode average at P1 to around 10ms average in P5
Yeah that shouldnt be too bad
P6 pushed ~20 and it was just not worth it at all
I'm doing like 3x framegen though so don't wanna push the latency too much
Ah with lossless?
nah just in game
Oh forced dlss version? I can see not wanting more latency in your case. I’m just doing 2x rn
Feel free to slap me but where is the download link? I thought it was in the top post. Do I need to pay for early access?
Check pins
Yeah tbh it's not bad at all in this game havent had any latency issues. Will give it a try once my wife stops using the tv
Reno DX + max settings + optiscaler tweaks + parallax fix = 🤤
parallax?
Sounds good, let me know what you think. That said, if you are encoding at quarter or half switch to full will be the largest difference imo. But if you compound it with P5 it’ll look great
Oh there we go, when you click mods > crimson desert there is no bloody pins icon, you have to click the named subchannel Crimson Desert for it to go full screen THEN it shows up 🤣
its a feature from the no hud and effects mod
Ok cool will try those first
anyone know whats up with windows defender insisting that this .addon is a severe threat?
discord is confusing
it makes the textures look better is all
Are you doing AV1? I've been doing HVEC. Idk why but AV1 always looks lisghtly more compressed to me
Why are you sleeping in the river?
AV1 100%
what bitrate?
1GB/s but you can easily pass at 150+ at 4k/120
wait how I thought it was limited to 500mbps?
I just have the bandwidth so I’m full sending it
I’m doing weird shit
Forked version of moonlight on the Vision Pro supports higher uncapped bitrates
Yeah it’s even less going up to 1G, I do not advise it lol
I want to try it tho lol I'm full ethernet so I think it wouldnt be an issue
rcas is integated already? so i don't need lilium's rcas shader anymore?
Likely not so long as your host and client NIC’s support your bitrate with some headroom.
500 is already more than enough tbh
Yeah idk if my client could now that i think about it
@warm magnet the parallax fixe doesn't really just make the texture look better it change the depth perception of the ground and rock mostly making it look more in depth 3D wise 🔥
Yeah that’s always the caveat lol. If your NIC caps at 1G and you request it, you won’t have headroom over that really to handle anything else and it’ll choke out. I had to go through an annoying amount of effort to cap all my NICs.
If your client has a PCIe slot or a USB3.0 you could opt for a PCIe NIC that supports whatever bandwidth you want to push for pretty cheap, or the USB route then just limits you to the bandwidth over 3.0
Annoying, but workable
I found it more pain than it was worth lol
Does anyone recommend preset 1 vs 2 vs 3? Are 2 and 3 just more vanilla looking?
preset selections are all identical, they just save whatever settings you apply in them
Thanks for the info!!
Does adjusting the max nits mess with the config or is it to be done per monitor?
For example I have one OLED that does around 750~ and one that does 1400
set peak based on your screen
Thanks again for everything
For example if someone has a peak brightness of 450 nits in a 10% window, what should they set their peak brightness too?
ingame brightness set to 100, renodx brightness 203, renodx max nit set to 1000 for my tv, exposure 1.15, saturation 55, all the bells and whistles enabled. It's so beautiful 😭 It's a total night and day difference between my game and my girlfriends game on ps5 with our tvs side by side.
i just look at the clouds in bright sunny weather, and adjust the max nits right to the point of blowing detail in the highlights
then i just adjust game brightness to whatever looks nice
Before and after what?
when grass ao
@upbeat magnet parallax fix from no hud on nexus
Any negatives to using it?
@jolly isle note that in some area it create artefact especially when your cooking you will notice lots of glitch using the parallax fix
Welp there it is lol
@upbeat magnet its a 1 button toggle on off
so if it create some glitch you just toggle off anytime toggle back on
it look 1000% better with it turned on
only found 1 area having issue with it turned on and when cooking thats it so far
Will give it a go, don’t really have access to binds in a typical gaming scenario but maybe I can find a workaround. Cheers
Numpad 9 is default
Am I the only poor guy with an ips monitor here🥲
lol just rubbing it in he
less parallax gives more lighting details?
@velvet cliff dont think it affect lightning detail
I have pseudo HDR, 455 max nits isnt great
I think HDR10 is what, 1000+?
and not peak1000 mode
its add a better 3D\depth perception with all object in the game counting ground rock and tress
HDR10 standard is 1000
You use hdr?
@velvet cliff look at the difference in the ground detail with it turned on
just set it to whatever the clip point is in the hdr calibration app
@sharp moon no in game HDR just renodx still work
the calibration app uses a 10% window as a test
Should my game brightness in RenoDX be set to whatever max nits is for my monitor?
e.g. i think PG27AQDP does around 1300 nits, meaning should I set the brightness to 1300?
and then match that to renodx or leave it at 1000?
Does the mod have a sdr option
set the value you get from the calibration app in renodx
renodx actually pulls that value for you if you had it set before running the first time
Appreciate the explanation, thank you
like my monitor says trueblack400 mode but calibration actually shows it can do 455 nits
so I set it to 450
Is it ok to round up to 800 if it start clipping at 780?
which monitor?
mine is rated true black 400 but it can hit peak 1000
msi mpg 271qrx qdoled
no upscaling vs DLAA
no sure how DLAA halucinated tree branches here tbh
Should be able to hit peak 1000 on that monitor, probably have to enable it in OSD somewhere
I can choose either Peak1000 or Trueblack400
but Peak1000 has issues
ah
i have the msi 271qpx e2, also doesnt begin clipping til 450 with windows calibration
I mean, it's not the end of the world but you should really just set it to the correct number
Peak 1000 sucks on these few MSI ones with this naming scheme
thats why i have to use the TB 400 mode
They still havent released it
its been a year

Step 2 right, step 3 is full screen brightness?
Chatgpt been telling me I’m stupid saying they the same number lmao
Said it’s cause I’m using eotf boost. I’m losing me mind
the clip point is separate from the actual fullscreen nits your screen does, so it's probably just pulling a bunch of info about screens and not how the calibration app works
interesting, yeah it says they still havent released it for my model. except their is a firmware update they dropped last month but all they did was "Optimized the count time behavior of MSI OLED Care."
why do those textures look so crisp
any settings i should change if i dont use RR?
Vision calibration is actually kinda wild. Basically clips right at the end of the available range within ~25nits within the calibration tool.
yeah the issue is basically this, super generalized:
"TB400 remains visually brighter than P1000"
Alternative auto exposure off I think?
afaik there is not going to be a fix.
we're still not 100% sure which settings may have issues without RR.
BRDF, smooth terminator, specular aa, and diffraction might be the only ones?
colours look kinda washed out with this mod and HDR on - is this mod fixing the toxic green spew?
@narrow token there colorgrading slider in redodx you gotta adjust those
Hi, is there any official release date of this MOD?
without DOF you really see the bad LODs
the ocean and the buildings have obvious patterns
I didn't notice that there were so many issues in HDR from every game, until I used RenoDX.
HDR is the least of this game's problems
RR off preset
I know, but I think that they will fix it.
Is this game still blurry in near field of view?
how? reno?
@young pebble https://www.nexusmods.com/crimsondesert/mods/1?tab=files
parallax toggle
Numpad 9 is default toggle for it




