Omarchy does not Boot after install from iso

[tropic needle]

I installed Omarchy through the iso. Trying to boot it through the Omarchy->Linux option in limine leads to a black screen. If I press F2, I can type on screen, however it does not work like a terminal. Ctrl + Alt + F2 does nothing
I am installing Omarchy 3.3.2 on a Laptop with a rtx 4060

[tropic needle]

Removing the quiet splash parameter leads to the error message

[tame furnace]

bios menu (f2 at boot)
super boot off
tpm off
restart

[tropic needle]

I believe i forgot to turn off tpm

I can't find anything other than clear tpm in the bios though

The advanced mode of the bios appears to be locked

[tropic needle]

it boots when adding modprobe.blacklist=nvidia_drm to the parameters in limine

Is this a tpm issue?

I did a system update after booting it, but the issue still persists

[tame furnace]

the issue shows "Problem loading X.509 certificate -22"

try ctrl+alt+f3, not ctrl+alt+f2

[tropic needle]

Secure boot is disabled

[tame furnace]

in bios, do you have gpu setting available

[tropic needle]

no

[tame furnace]

show limine 'e' edit page

[tropic needle]

The changes to it don't save

[tame furnace]

add a space and number 1 to the end and then f10

[tropic needle]

What does this do?

[tame furnace]

boots into single user mode (root)

not graphical / sddm / wayland / hyprland

[tropic needle]

This did not change anything

[tame furnace]

show error

[tame furnace]

ok at that screen press ctrl+alt+f3

[tropic needle]

That does nothing

[tame furnace]

are there any other operating systems on this machine

[tropic needle]

No

I reformatted the entire drive with the omarchy install

[tame furnace]

so, go in BIOS and clear TPM

[tame furnace]

Is this first attempt at installation?
Try again

[tropic needle]

The system is running on integrated graphics

[tame furnace]

have you tried switch to discrete

[tropic needle]

I will

[tame furnace]

try update bios

[tropic needle]

I will call it here for now since I have some thing to take care of

I appreciate the support

Thanks

Have a great rest of your day

[keen yoke]

You are having a modprobe issue, most probably driver-related. And then two processes fighting for the same resource (rw semaphore) leading to a hault

Try booting without any usb devices connected

You should be able to press "e" on the limine 3sec wait sequence. Add " nomodeset" at the end of the cmdline. That should avoid loading gpu drivers

Then run: journalctl -b -1 -p 3..4
Which might have the driver in question mentioned

And/or, sync and update everything with pacman.

Oh, you were able to do a full boot. Well, try updating the drivers. Or identifying which ones are the problem

I'd guess it is the two variants of nvidia drivers being uncomfy with each other

[tropic needle]

The laptop's gpu is not running

I assume this is because of the proprietary control center software which can controll the gpu

I'll have to find a solution for this

[keen yoke]

Ok, my apologies if I repeated the partial fix. I had read half the chat only. Best of luck!!

[tropic needle]

All good, and thank you

[keen yoke]

Is there software before booting for it?

These laptops with GPUs are kind of wild

[tropic needle]

I believe dual booting windows with the stupid software thing would work

[keen yoke]

Ooh, it's in userspace

Dang

[tropic needle]

But I can't put It back on the laptop because my usb stick decided to die

[tropic needle]

yeah

and the bios is locked down

[keen yoke]

What?

[tropic needle]

the advanced mode is inacessible

[keen yoke]

Ah, it doesn't have a gpu

Such a mess... How does a piece of software like that brick a machine

Or could you boot into the software?

I am so lost, lol

[tropic needle]

Out of the box (in windows) the gpu is disabled when it is in energy saving mode or not plugged in

[tropic needle]

no

[keen yoke]

It has an iGPU too

[tropic needle]

yep

I was not thinking about using linux when I bought it otherwide I would have gotten something else

[keen yoke]

We need some new-ish forum post for this I feel

[tropic needle]

I believe there are solutions for some laptops where someone wrote a kernel driver, I might try that

[keen yoke]

DHH mentioned working on a set of newer laptops in the future

For Omarchy's sake! Hopefully it gets swifter soon. Linux always lags a bit in terms of hardware

[tropic needle]

This is (in my opinion) by no means the fault of linux

The laptop builder probably just chose to ignore linux

[keen yoke]

If you could just use the iGPU... At least to test things

[tropic needle]

I can

it boots when adding modprobe.blacklist=nvidia_drm to the parameters in limine

[keen yoke]

Yes, there is that. Windows also has such market capture. Almost like Apple for their own ecosystem. They absolutely make deals for it

Right

I strongly suggest checking forums

Perplexity AI might help too

It searches like a maniac on coke

[tropic needle]

That sounds like a good idea

https://github.com/wessel-novacustom/clevo-keyboard/tree/master

I found this

[tropic needle]

This combined with tuxedo control center allows me to controll the hardware

[tropic needle]

what would I be looking for in there

[tropic needle]

the problem loading x.509 certificate is gone after clearing secure boot

[dusky compass]

Hi,

Just installed #omarchy on asus zenbook.

I open wifi settings, see my network, but can not choose the network to enter the password.

Not with mouse, not with keyboard.

Please #help.

Thank you!

[tropic needle]

Did you navigate to the network using tab?

[dusky compass]

Thank you, this resolved the issue! 🫡

[tropic needle]

I will simply use modprobe.blacklist=nvidia_drm until i find a fix