Yet another 5020 toolhead (Clogged hole/AMOGUSBURNER)

[deft ferry]

close to break the cap

[clever charm]

oh damn... got a pic?

[deft ferry]

nope

i changed back to the one i had

but doesn't fit good behind fr

just for that cap

[clever charm]

would it be possible for you to make one? i don't have a 3d model of it and don't have one either

[deft ferry]

send me to edit it in onshape

and i'll fix it

oh

[clever charm]

step file is available with the others if i'm not mistaken

[deft ferry]

the screw too

ok

[clever charm]

what screw?

[deft ferry]

the screw hole should go upper

so the cap don't break

[clever charm]

https://docs.opencentauri.cc/hardware/CC2/assets/cc2_toolheadboard.jpg ok i'm stupid

urghhh the cap placement is really unfortunate

[deft ferry]

NICE

Fkin cap i was close to break it

i can just take off the board but ugg

can you fix it with that?

[clever charm]

don't worry, i think this picture should do

[deft ferry]

lovely

the screw hole it's nice if you fix that with the cap

6,3 mm x 11 mm mb

the cap

[deft ferry]

@clever charm did you fix it?

[novel elk]

My guess would be not yet.

Otherwise he would have posted something.

[deft ferry]

😢

[heady coyote]

I ordered a 5015 4 wire fan last night.

Next weekend is ASA printing days.

[deft ferry]

nice i am doing the same thing

you'll have to change de male

[clever charm]

Exactly! But doing it now

[clever charm]

ok that's not too bad. proxima done now acctc

[deft ferry]

i think could be more

but don't do nothing i check for you

[deft ferry]

only acctc?

[clever charm]

looks ok to me, there is quite a bit of room between the bottom of the cap and bottom of the board

@novel elk @deft ferry thanks for pointing out the issues and thanks for helping me test!
https://www.printables.com/model/1575497-another-centauri-carbon-toolhead-cover here's the updated back bumper for both toolheads

[blissful vigil]

Back_bumper_Proxima_5015_cc2.gif

[deft ferry]

Thanks!!

[clever charm]

also the new proxima back bumper should hold itself in place a lot better due to the teeth on the alignment pegs

[deft ferry]

Cool

[deft ferry]

Nice job lizard

[clever charm]

damn that looks sick

now gotta redo the credits page

[deft ferry]

Xd

[clever charm]

perfect then i'll upate it on printables thanks a lot!

[deft ferry]

All goes perfect

Much thanks

What's new?!

111mb lol

[clever charm]

NONONONONO

DON'T

@deft ferry #announcements message

[deft ferry]

Fuck

gg

[clever charm]

welp i think the only way you're gonna get opencentauri later on is with a uart adaptor... but from what i understand for now you are sol

[deft ferry]

:'/

For now it's not good option getting opencentauri to it

So well I'll get a uart adaptor

[clever charm]

for now i think you can't do anything with that eihter, maybe go ask in #research-cc2 where the people that actually know are

[deft ferry]

So what's new..

[drifting tusk]

it removes SSH and removes downgrading to versions with SSH

[deft ferry]

Only?

Dam fuck elegoo

How to repair?

Uart adaptor?

ll

[drifting tusk]

uhhh

[deft ferry]

at least i got this beauty @clever charm

[drifting tusk]

@deft ferry put this onto a USB stick and then go into the settings -> check for updates -> offline update

Edit: don't use this, use #1466083137967755356 message

[deft ferry]

What fixes that?

[drifting tusk]

that's 01.03.02.36 marked as a v2 update, so you get downgraded, then you can upgrade to .51 again with the update file I'll post a few minutes

[deft ferry]

love u

[clever charm]

Me too

[green berry]

do you even have a cc2?

HUH

[deft ferry]

Says to me

[green berry]

if anna hacc works we just ended elegoo war in less than they took to release that update

[drifting tusk]

huh

[green berry]

kek

wait @deft ferry IT WORKS?

:eyesq

hypereyess

[deft ferry]

Dunno but he works faster than elegoo

But I know it will work

Trust

[clever charm]

no but i still love anna

[dire canyon]

yes, the new back bumper is a much better fit. good work

[deft ferry]

😄

[clever charm]

https://www.printables.com/model/1694872-proxima-toolhead-cover-for-elegoo-centauri-carbon 🎉

[high sun]

Just a quick check, does the bumper with the carto variant need updated too?

[clever charm]

uhm it's the bit i haven't updated xD

so the carto mount is cc1 exclusive for now

[deft ferry]

New problem

[deft ferry]

This happen to you?

Mb I have to unscrew a bit

[drifting tusk]

did you do the downgrade?

[deft ferry]

Not yet

I was printing

[drifting tusk]

kk

let me know how it goes

[deft ferry]

Both are ready?

[drifting tusk]

51
http://public.suchmeme.nl/cc2-01.03.02.51-2ab3ffd72854dfd40af180c57fb9bb31-release-abroad.zip.sig

[clever charm]

Shit how bad does it hit the wiper?

[deft ferry]

Don't hit it

But I guess it's the same cc1 and cc2 no?

Or that is that it hit it?

[clever charm]

Base cc1 wiper is very soft so it's not really a problem

[deft ferry]

Has to be at level of the cap

Wait

No?

[clever charm]

I don't understand, it's normal to have the bumper extend past the cap

It extends to where the stock cowling should be

[deft ferry]

i mean

more

exture a bit more

dunno

now the poop chute don't moves

[noble mesa]

*she works faster than elegoo

[deft ferry]

like it doesn't hit the back thing

kfgfd

see?

[drifting tusk]

poop

[deft ferry]

the poop don''t go out

[clever charm]

Cc1 has a different chute so idk what it's supposed to do

[deft ferry]

hmm

[clever charm]

I don't even know how the cc2 homes

[clever charm]

shit... can you get a picture from the side?

like how hight the lever is

[deft ferry]

What side

Oh

Ffff

[clever charm]

wait what

[clever charm]

oh ffs

ELEGOOOOOO

[deft ferry]

And it hits that motor

Xd

When goes to the left

[clever charm]

during homing?

that is normal

[deft ferry]

Leaving home

No not normal

[clever charm]

got a video?

[deft ferry]

Nope but I can tell you what to do with that

[deft ferry]

And I dunno if it's height or extrude

[clever charm]

luckily there exists reference

[deft ferry]

uuh

[clever charm]

it just needs 1,5mm more to the bottom

[deft ferry]

you can see that here too

Video

[clever charm]

not sure but i think this is pretty normal.... the cc1 does the same.

still fixing the design though

[deft ferry]

No no

It makes bad sound

With stock that don't happen

Did you hear?

[deft ferry]

this is solution yy

[clever charm]

yes

[deft ferry]

@drifting tusk http://public.suchmeme.nl/cc2-01.03.02.51-2ab3ffd72854dfd40af180c57fb9bb31-release-abroad.zip.sig what one first?

[blissful vigil]

Back_bumper.gif

[deft ferry]

uuh

tasty

[clever charm]

wait no

forgot the important bit

[blissful vigil]

Back_bumper.gif

[deft ferry]

haha

fr

xd

[drifting tusk]

the one I sent first

[drifting tusk]

this first

[deft ferry]

oki

[deft ferry]

I'll tell you when the chamber heats up..

[heady coyote]

I actually have the 4 pin micro connectors from another project.

[deft ferry]

humm there is news

do you have asa yet?

[deft ferry]

Finally is going up omg

[heady coyote]

I have 2 rolls of ASA.. blue and green. Printing a toolbox for the next few nights.. then ASA prints.

[deft ferry]

@clever charm still hits the fucking motor

The poop issue is gone

You can check cc2 back covers for the measurements

[clever charm]

joke's on you, that's what i did

if it only does this while homing it's normal

[deft ferry]

okay

[deft ferry]

says it's a virus

trojan

D:

[drifting tusk]

here's the full patched version with the .51

(it's both files combined)

[deft ferry]

huh

[drifting tusk]

did you install the first file?

[deft ferry]

no

[drifting tusk]

then just download this file and install it on the printer

[deft ferry]

oke

[drifting tusk]

it has the downgrade fix and it's the .51 in one file

[deft ferry]

no more firmware updates then

i guess

[drifting tusk]

I guess

[deft ferry]

So mb it's time..

[drifting tusk]

but we'll work on a patched firmware or cosmos for CC2

[deft ferry]

https://cdn.discordapp.com/attachments/1504968520755056670/1506195802807209995/gecko-lizard_2.gif

[drifting tusk]

https://cdn.discordapp.com/attachments/676670116099915809/1468353510595625011/davenportiowa.webp

[deft ferry]

xD

[deft ferry]

@drifting tusk where I paste the file?

[drifting tusk]

just onto a USB stick

not into a folder on the USB stick

[deft ferry]

Not founded firmware

[drifting tusk]

huh

[deft ferry]

The stock USB no?

Hhh

The USB stick that brings the printer

@drifting tusk maybe another USB drive?

[drifting tusk]

uhhh should be fine

@fallow orchid can you deal with this?

[deft ferry]

Why is it .zip.sig?

[drifting tusk]

because that's what elegoo uses for updates

[deft ferry]

And not only .sig

[drifting tusk]

but like, we have a downgrade option for when it's actually required. you can stay on v2 if you don't have problems

[deft ferry]

Hmm

[fallow orchid]

With what

[drifting tusk]

idk

too incompetent to download file and copy it to a usb stick, ig

[fallow orchid]

It is indeed just place it on the root

[deft ferry]

no no

What root tf

I just pasted it into the usb

[clever charm]

What happened to my clogged hole

[deft ferry]

first page

[green berry]

don't u have a cc2?

[deft ferry]

mmmmmmmm

[fallow orchid]

84mb is not the correct size is it

Or did anna zip it better

[drifting tusk]

you downloaded the wrong file

[drifting tusk]

this ^

[deft ferry]

no

that's the second one

[drifting tusk]

that file is 111.5MB

[deft ferry]

you said that is the second file

[deft ferry]

.

[clever charm]

https://tenor.com/view/wheeze-laugh-gif-14359545

[deft ferry]

xd

[tropic gazelle]

@deft ferry Shut up and do what Anna says.... 😄

[drifting tusk]

ACH DIGGA

maaaaaan

[deft ferry]

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

[clever charm]

Willste Bier?

[drifting tusk]

learn to read smh

[green berry]

english?

[drifting tusk]

spezi bitte

[green berry]

do we invade poland?

[tropic gazelle]

SCHNAPS !!!!!!!!!!!!!!!!!!!

[drifting tusk]

✅

(again)

[clever charm]

Sprich deutsch du hurensohn

[drifting tusk]

[tropic gazelle]

BIER für unseren Waschbären

[drifting tusk]

https://tenor.com/view/sprich-deutsch-deutsch-sprich-detusch-du-hurensohn-gif-14115324523022628629

do not

[deft ferry]

sorry miss click

[clever charm]

https://tenor.com/view/the-office-dont-gif-18301823

[deft ferry]

let's see

See I was right

[drifting tusk]

yeah, that file shows up at 02.00.00.00

[deft ferry]

Are u coming into my cc2 Anna?

[drifting tusk]

no

[deft ferry]

🙂

Jk

Thanks for the patience

[green berry]

spanish cc

this is fun

kek

[deft ferry]

Now I have 3.0

[drifting tusk]

random q: how old are you?

[deft ferry]

5

[drifting tusk]

@ discord ban this person

[deft ferry]

nonono

[fallow orchid]

Question, do you understand the context behind the picture you posted?

If not i would highly suggest ceasing that kind of activity

If you do continue you'll be banned

Your choice

[deft ferry]

yeah eta

my bad

not anymore

[drifting tusk]

also about the other picture you DMed one of our team

please think twice

ideally, three times

[fallow orchid]

Ideally it would only have to be one time and the conclusion should be no

[deft ferry]

ok

[clever charm]

Are you actually?

[deft ferry]

no

[fallow orchid]

I would also uh suggest not just ceasing that activity here, but anywhere.....
Not the greatest kind of people to look up onto...

[deft ferry]

hahaha i got dni checked

for saying that

[deft ferry]

I just act like that i don't know why my bad for real

i'll change my mindset for this

[green berry]

no but Anna is very ban happy

also stop deleting things we have history on our server

so if u delete it, you just make it worse

cause then I am pissed and I need to search

[deft ferry]

what i deleted?

That eta gif?

[green berry]

okey I am not vouching for not bannim him already

who votes yes raise your arm

[drifting tusk]

which arm

left or right

[tropic gazelle]

both 😄

[deft ferry]

[green berry]

that was the trap question

cmon Anna

😭

[drifting tusk]

oh right

uh

idk

[deft ferry]

Oh who banned me

from discord

Who reported me

[drifting tusk]

hm?

other question: does the "upgrade" work?

cuz then I'll mark the fix as working

[deft ferry]

What

[drifting tusk]

the firmware update

[deft ferry]

?

[deft ferry]

.

[drifting tusk]

oh wait, you already posted it

cool

thank you

[deft ferry]

you

[drifting tusk]

me?

[deft ferry]

who?

[drifting tusk]

huh

[deft ferry]

thank you i mean.

[drifting tusk]

oh

no worries

[green berry]

okey so we aren't gonna ban him yet

noted

more luck next time bud

👋🏻

[deft ferry]

ggs

https://tenor.com/view/raccoon-praying-raccoon-god-raccoon-heaven-raccoon-sky-raccoon-meme-gif-8929863978049516685

[green berry]

the more you bribe the raccoon the more you get out of jail cards

👀

fyi

[clever charm]

When is it my turn?

[drifting tusk]

mmm monkeyy

[green berry]

I would rather get myself banned before you

kek

and that's a lot knowing only sims can do that

[clever charm]

@fallow orchid

[tropic gazelle]

and me ????

[green berry]

@fallow orchid for how much money would you ban me?

sip

very important question

[clever charm]

I think we are the love triangle that gets banned first

[green berry]

neah just gonna fake my ban to steal yo money

kek

[tropic gazelle]

@green berry <=== never banned status

[green berry]

I was banned, once on discord

from a server that protected a pedo

sip

[fallow orchid]

Macros, you aren't free yet

[green berry]

and so I started yelling at him

but they banned me

instead of him

so apparently some people are okey with those

ShrugFT

anyway if I see any of those here they get insta banned

just letting them know in advance

[fallow orchid]

I think i should roll a dice and ban the amount of people the dice rolls at random

Reduce the population

[green berry]

just check for people that never got roles

or that never posted

[fallow orchid]

Discord has a built in feature for it

But i've never seen anyone actually use pruning

[green berry]

and like 50 don't even have roles

and like 200 have discord accounts younger than 3 months

gonna delete those that look sus

[deft ferry]

Where to choose what printer i have sorry?

[green berry]

roles

[deft ferry]

oh ok channels and roles

[green berry]

okey I got tired

there are a lot of users with no roles

can we make a bot that kicks them

[clever charm]

i had no role for the longest time

[green berry]

EU is a role

They had nothing

[clever charm]

yeah i know that's why i said that

[shy cedar]

does proxima toolhead cover support btt eddy? 👀

[clever charm]

nope 👀

[shy cedar]

damn all good just gonna keep rocking your other one then!

[clever charm]

yeah i think eddy is gonna be really hard to make fit since the ducts are much larger

but carto v4 works if you don't have canvas

[deft ferry]

Do you know it's Spanish thing?

[noble mesa]

Oh this totally changes things, we just missed the terrorists groups logo in the background, of course it’s ok for Spanish people to be terrorists, duh.

🙄

[green berry]

[deft ferry]

In Spain is kinda meme it's not a "Spain thing" it's just one comunity.. not that bad like Germany

[clever charm]

Nazis are nazi... No matter what nationality they have

[novel elk]

“There’s a saying in Germany. If there’s a Nazi at the table and ten other people sitting there talking to him, you got a table with eleven Nazis.”

[clever charm]

Damn didnt know this but yes

[deft ferry]

No, ETA were not Nazis. They were actually the ideological opposite a far-left Marxist-Leninist and Basque nationalist organization, similar to the IRA or Latin American guerrilla movements. Nazism is far-right, based on racial supremacy and fascism

There you go

@novel elk

[clever charm]

At the extremes there is no left or right anymore.... And I don't condone any political extremism nomatter of nazi or Antifa.
Also basque nationalist organisation sounds pretty right leaning to me, after all that's what the na in nazi stands for. Anyways this is not the place to talk politics. This is the place to talk about a piece of plastic that holds a fan in place

[deft ferry]

xd

[deft ferry]

https://cdn.discordapp.com/attachments/676670116099915809/1468353510595625011/davenportiowa.webp