software-support
Printer Not Responding
Install OpenCentauri
Trying to use Ramps 1.4 with Klipper as a controller for multi material fail to boot
Default root shell fromn Sims on port 4567
z-offset
Print Stop Mid Print - Machine Frozen (newly flashed)
Upload and Print "intermittently" fails
Weird blobbing artifacts
i am trying to dial in ironing
Boot loop
Prints started failing during start g-code
X-Axis Offset?
Issues with printing on OC firmware without first manually homing
thoughts on providing the Log files to Elegoo for warranty parts support?
Head crash into XY steppers
Stop leveling before completion
Error Uninstalling OpenCentauri
Preheating ECC on OpenCentauri FOR ABS
Correct config/DRAM params for booting mainline u-boot?
Possible to clear local files?
Error code 1231
Freezes
Time wasted?
Suggestion to use the nozzle to home Z axis
Forcing 'turbo' or other modes via slicer or some other method?
Trying to go back to stock and failing
Version 0.3.0
Skew Correction
Heated Bed Turns off While in Idle State
Print head heating anomaly. Please follow the print head troubleshooting procedure.
Pausing the CC in OpenCentauri
Installing OC 0.3 recovery core dumps
PrusaSlicer Firmware
im unable to install firmware
Intermittent network connectivity on OC 0.2.0
Any chance modifying bed PWM frequency?
Homing location
Webinterface not working
Options after failed install OC 0.2.0
Weird stuff
Multi color manual printing
Kalico installation.
OC latest firmware issue
Just installed open-centauri from the website, and now it seems my cc is hanging on the bootlogo
OpenCentauri
Dev mode application memory issues
Disable chamber fan?
Firmeware
Cannot select CC only C
Web UI broken across multiple firmware versions