#PZ B42 Dedicated Server
46 messages · Page 1 of 1 (latest)
how did you install? what OS?
Is the server running at this moment?
yes I been just let the server running
I can locally connected no problem problem is only my friends cannot connects
only gives me this
I installed on windows with steam CMD
you may need to open the 2 incoming udp ports in windows firewall, forward the ports from your router and make sure you have your own public IPv4 address
I did open firewall inbound and out bound but I dont no I have my own public ipv4 address or not
do you know how to tell?
If you can log into your router you can see if the WAN address matches what you get if you search for what's my ip
or you can tell if it's in one of the private ip blocks like 10.x.x.x
oh its not matching what is it mean ifs not matching last digit are differnt is it ARP TABLE ? also my provider is verizon
ARP is a local network thing. ..
but i see wan
Broadband Connection (Ethernet/Coax)
is it still a local networt thing?..
in your router do you have the option for port forwarding?
looks like you might just need port 16261 also
16261 and 16262 UDP ports are the only ones necessary
It is unusual that the server shows up as online on Battlemetrics though
Let me know once its online again so I can test connecting to it, I was not around before and it seems offline now
you are the best
anyone farmiliar with static nat?
or is this the reason the port his not opening ? i think my public wan IP port is not opening
okay i figure out i dont know it is risky or dumb im doing this for dedicated server lmao but my solution was DMZhost the local IP with wan
looks like its working
okay i been going crazy i think it just a my provider
i had to just check my provider to see why my port fowording is so hard and they confirm they have been having issue with specifically public IP port fowrarding
aight looks like i can access both of my local ip and public ip now
this is how i opened it and works
but i dont know why this this site tell me port is close
🫠
the WAN address is either your routers public IP or it's address on your isp's network usually set automatically using dhcp
you can't always test udp ports like that
you should confirm that you do have your own public ipv4 address from your isp