I am following the smash 64 online website guide to connecting a gamecube controller for online. I followed the guide just like i normally would. However, when I went to controller input (i made sure it was nrage 1.83 & vjoy was on, and that the driver was running), it just showed other inputs that werent GCN. Please help me figure out how to make it to gcn inputs
#GCN controller wont connect, guide isnt working
abstract walrus
paper needle
Is your adapter mayflash? It needs to be on PC mode so the computer sees your GCN controller as a PC controller
There should be a toggle on the back of the adapter
abstract walrus
when i press start when its pcm ode on the driver
it doesnt even detect the adapter
the driver only works if its wii u mode
is there anything i need to configure in the vjoy app?
paper needle
It should work without vjoy, can You screenshot your vjoy setup and pj64k input plugin setup?
paper needle
If the adapter is on PC mode, windows should see it as a PC gamepad, have you tried it without vjoy?
paper needle
Is the adapter not being detected by the OS in PC mode? Not really sure what program is that on the screenshot
cinder otter
Is the adapter not being detected by the OS in PC mode? Not really sure what pro...
It’s for Wii U adapter driver
cinder otter
that is what happens when i turn it to pc mode
If you have pc mode on your adapter I don’t think you need to run that
abstract walrus
If you have pc mode on your adapter I don’t think you need to run that
when i use pc mode (app running or not) it just doesnt detect the adapter at all
not even offline
the other file that i use at least works offline
on wii u mode
paper needle
You can use your controller on pj64k offline?
You may need to enable RAW Data on your controller plugin settings in pj64k
abstract walrus
You may need to enable RAW Data on your controller plugin settings in pj64k
how do i do that?
also different question
can i edit this to turn off stick jump?
paper needle
should be under controller pak tab
the pj64k plugin that works with netplay is called N-Rage`s Direct-Input8 V2 1.83
should be under options > settings > plugin tab
that should allow you to manually set each button
you should be able to select your adapter on the devices tab
there's no way to disable stick jump atm, you could try to tweak your Y axis to reduce the range on it or something to prevent the stick jump, but that's it.
abstract walrus
ive been trying to use the nrage 1.83
but it just doesnt work
thing is
for my file that i use that will work
this is what it shows
as you see there is no rawdata option
anyways i gtg to bed
