#M5 stick antenna
1 messages ยท Page 1 of 1 (latest)
looks cool๐ฆ Throw a photo where you placed the modules pls๐
Do you have pics of the inside
there are no modules, it's a wifi antenna.
scrape off the old traces of the 3d antenna then solder on an sma connector
that's it
please share how to do it, I want to buy another m5stick for this purpose xD
it's complicated
no, I pasted everything, sorry
maybe it's a little risky if you're not good at soldering
Is antenna
anyway I broke one, be very careful with the buttons
this is what is broken, you have to cut the wire, then solder the two wires that you have to divide and that's it, melt the plastic with the soldering iron but be careful, I recommend a tool made for this purpose, glue the antenna, I hope I was helpful.
attention, you have to disconnect the screen and the battery, find the specific tutorial on popp.n's tiktok channel
ah, right. i used such an antenna.
Is that a signal booster next to it?
yes. it is a soft antenna sticker. it works but don't expect much
Isnt that signal booster sticker is scam?
How does that work?
this is about the same antenna as on the esp board. People usually forget to connect them with a wire, that's why there are so many negative reviews.
They literally advertise that as a sticker signal booster for cellphones, so why people wired their cellphones antenna to that sticker doesnt make sense ( sorry for bad english )
gluing without physical contact with the antenna is pointless, but if you connect it to the output it has littlebit effect
I did a bit of upgrading
i need that pcb ๐๐
What pcb is it??
no idea where to sell tho, he is the one who made it
M5 destroyer by POPP.N
17 euro and shipping : 22
but this PCB is finished I think, I think that popp.n sells the projects, then you have to solder them from what I understand
.
To use an external antenna you need to remove the track on the pcb, antenna gnd and antenna +. Am I thinking correctly?
Yes