#Battery for M5stickc plus 2
45 messages · Page 1 of 1 (latest)
Hello
How i can connect a battery to m5 tackc plus 2
Open the Stickc, cut the wire of the old battery, and solder the wire of the new external battery.
I want to connect it by the pins
The first time i do it same you but it make m5 always attach with battery and some time i don’t need too much battery so i change to connect via pin
Just do it follow my video. It is same a battery backup
- gnd. + bat. Right ?
GND - GND
BAT - 3.7v
Where to order this from
Just use a power bank .
Bro chỉ ae với
Bro cần gì nè
Cần link tất cả mọi thứ trong video với cách nối:))
Cho tôi xin link các ghim cắm vào đít m5stick trc đi
Typie wysyłasz to po raz 100
Lol I added battery
fr
ok
You need to make a case . To save my eyes 👀. Appreciate the effort . Been doing the same it's all getting out of hand.
@warped relic could you please share a schematic . I could help with pcb design and module layout and make it pretty
How much mah battery
You are using lipo
You are using li-ion battery
This is wrong way
When u want to charge it it flows through m5 stick also if you are willing to attach m5 stick
Attach b/w tp4056 vout + and stepup booster vin+
For cyd
@lean wing how so ? It charges the battery and gives pass through. Voltage at Voltage out pads 4.6v(set) disconnect usb lead runs off battery still gives 4.6 at Voltage out pads
BTW for cyd not stick
@yfilly had it laying around
@warped relic how can i add a better battery to m5stick and also where do i buy it and whats cheapest one
USB power bank is the easiest auxiliary power option. Like the ones for phones
I have 1000 mah battery with tp4056 and stepup boaster
is there any cheap one thats easy to use?