Hello, is here someone capable of helping me with tip forming settings? im running nextg fiber hotend with galileo 2 extruder, and im getting unconsistent tips, one time the tip is clean, second time there is a string with blob on the end. i dont know what to do atm.
#Help with tip forming
sterile panther
modern fossilBOT
<@&1304550334839918672>
sterile panther
ramming_volume: 0.26
toolchange_temp: 192
unloading_speed_start: 6
unloading_speed: 4.5
cooling_tube_position: 24
cooling_tube_length: 8
initial_cooling_speed: 6
final_cooling_speed: 20
cooling_moves: 5
use_skinnydip: False
melt_zone_pause: 0.12
cooling_zone_pause: 0
here are my settings
blazing gyro
If you hear the sound of crickets on this issue, it's not that we're not ignoring you, it's just that many have tried and failed to get consistent results (myself included), and moved on to toolhead cutters even for machines that don't have good out-of-the-box designs. I hope I'm wrong, and that someone will able to help you out here!
sterile panther
thank you soo much, i had filametrix but with that a lot of filament path issues soo i wanted to switch to tip forming :/ idc if it takes 1 hour to form the tip buut i just want clessn filament path and stuff..
maiden oxide
I’m having similar struggles on my v0. Haven’t spent much time trying to tune it though. Hasn’t been easy.
The v0 is also out of commission right now so not going to happen for a bit
coral thunder
the second part of tip forming is that it will vary by like every filament you have
sterile panther
is here some alternative of filametrix for stelthburner with g2?
maiden oxide
is here some alternative of filametrix for stelthburner with g2?
filametrix and FilamATrix are two different options. The latter is recommended for multiple QOL improvements
dapper garnet
G2E is not recommended for auto-loaders in general due to its filament path though.
maiden oxide
well, yes, but when given the choice between the two g2 versions on SB, I'd go with filamatrix
dapper garnet
If you're looking for good toolhead options with a cutter though, a majority of us are moving over to A4T with Crossbow cutters for now
sterile panther
I want to stick with my meowburner
Xd
i smh lost the spring
Looks fine to me
sterile panther