Roadrune: Hi, trying to print my first multi-filament print, but get a Internal error on command:"T0" once QGL and meshing are complete.
T0/T1 etc works fine outside printing, and single filament prints works fine aswell, please help me as i am completely lost...
klippy.log, I am a potato.log and sliced file attached.
#[SOLVED] T0 error
tame perchBOT
Roadrune: For some reason the I am a potato.log was changed to i am a potato 😛
Roadrune: So i can not write I am a potato here?
tame lance
You are using Happy Hare?
If that’s the case unfortunately you will have to get support from their discord
peak storm
No, i am using AFC
tame lance
Okay, you should not have a mmu.log
peak storm
But i had HH installed previously, are there "leftovers" causing issues?
tame lance
Did you filling uninstall HH as well as charging your slicer settings to match AFC?
tame perchBOT
Roadrune: I was told to attach afc.log to this post, but only found I am a potato.log
tame lance
You must still have HH installed which will not work with AFC
peak storm
Did you filling uninstall HH as well as charging your slicer settings to match A...
I think so, i followed the instructions for uninstall from the HH Discord, and followed the setup guide for afc.
peak storm
You must still have HH installed which will not work with AFC
Do you know how i can check that?
tame lance
I’m not exactly sure and unfortunately I can’t look through your log at the moment. <@&1304550334839918672> thoughts here?
deep elm
Make sure you don't have their gcode processing running as well and any files that have been uploaded will need to be deleted and re-uploaded as the stuff that's already added to you gcode when uploaded could be causing some weird errors with AFC
peak storm
Make sure you don't have their gcode processing running as well and any files th...
You mean in the RPI itself?
I think i need more teaspoons here unfortunatly, i do not know how to check or fix anything of what you said, sorry.
peak storm
Ok, i checked with the HH guys, and all traces should be gone, it seems the log files cannot be deleted, so that's why the .log is still there.
I was asked to upload the afc.log file, but that don't excist in my printer.
deep elm
So for the initial T0 error, you are using an older version of the AFC software and need to update if you want to use passing in PURGE_LENGTH with the T0 command.
To update ssh into your PI
Navigate to AFC-Klipper-Add-On ex cd AFC-Klipper-Add-On
Then run ./install-afc.sh and select U twice to update
this is also why your AFC.log is not there since you are on an older software
peak storm
So for the initial T0 error, you are using an older version of the AFC software ...
Does this finish in a flash? It happened so quick i am not sure it did anything?
deep elm
If you restart your printer what is the AFC version when it prints out, if it's still v1.0.0 then it didn't update
peak storm
v1.0.4-5
deep elm
Yup it updated
peak storm
And it seemed to have fixed my issue. Thank you.
deep elm
And it seemed to have fixed my issue. Thank you.
So this issue is now solved and can be marked as so?
peak storm
Yes