filament loading speed

[undone agate]

Hello...how can I lower the loading and unloading speed of the filament? Because when loading, they are so fast that the filament spool tends to come out.

[wet cloak]

you can change speeds and accelerations in AFC/AFC.cfg

you can also change the fwd and rwd multipliers in AFC/AFC_Turtle_1.cfg for each lane which controls how fast the N20 motors spin

[fickle oar]

What do you mean by the spool comes out?

[undone agate]

When loading and unloading the filament it is so fast that the roller with the filament tends to come out of the track

[fickle oar]

Interesting hadn’t heard of that before

[undone agate]

I'm going to try changing the acceleration...thanks to both of you...I'll let you know how it goes

[undone agate]

The speed reduction worked for me.
I have another problem when starting the print. Even though I ask it to load the filament first, it always leaves it until the end.

[wet cloak]

are you passing TOOL=

as part of your parameters in your slicer

adtitioanlly

if you are starting ffrom scratch

eh nevermind you do home first.

[undone agate]

I don't understand...an example please

or can you correct the file for me?

[wet cloak]

send your gcode

it also won't load filament if hte correct tool is already loaded

[wet cloak]

also the actual gcode file you are printing.

[wet cloak]

PRINT_START EXTRUDER=220 BED=55 TOOL=055 Chamber=0 PRINT_MIN=120.329,81.8409 PRINT_MAX=179.595,158.088

i think you have chamber temp and tool backwards in your printer settings in your slicer.

055 is not a valid tool ID

(or you are conflating spoolman ID with tool)