Problem Test Lanes and Hub Cutting | ArmoredTurtle 3D | Page 1

fossil star Oct 23, 2024, 5:46 PM

#

I did the update today, unfortunately since then the command to test the lane no longer works and when I enter: HUB_CUT_TEST LANE=leg1 klipper goes into shutdown. But why ? before everything worked so well

green fiber Oct 23, 2024, 5:49 PM

#

Try taking the leg off and just put 1. I had the same issue running the old code when I did LANE=1.

#

Maybe they fixed it now

fossil star Oct 23, 2024, 5:57 PM

#

No klipper goes in shutdown

#

Is it possible to undo the update?

green fiber Oct 23, 2024, 6:11 PM

#

What happens if you send HUB_CUT_TEST_help

#

Do you see AFC_hub_cut.py in AFC-Klipper-Add-On/?

fossil star Oct 23, 2024, 6:19 PM

#

green fiber Oct 23, 2024, 6:21 PM

#

what about PREP_Help? Klipper restarted after you installed the new software correct?

fossil star Oct 23, 2024, 6:21 PM

#

i see this at github :

green fiber Oct 23, 2024, 6:22 PM

#

What do you see on your pi in the AFC-Klipper-Add-On folder

fossil star Oct 23, 2024, 6:22 PM

#

green fiber what about PREP_Help? Klipper restarted after you installed the new software cor...

yes i restart all

fossil star Oct 23, 2024, 6:23 PM

#

green fiber What do you see on your pi in the AFC-Klipper-Add-On folder

this :

green fiber Oct 23, 2024, 6:25 PM

#

If you ran the install script then it should be working.

fossil star Oct 23, 2024, 6:26 PM

#

Should I do it again?

green fiber Oct 23, 2024, 6:28 PM

#

I would try running the install script again. I would also restart the whole pi after. Remember to update the configs with the settings from your old ones

fossil star Oct 23, 2024, 6:33 PM

#

no it dosn`t work

green fiber Oct 23, 2024, 6:35 PM

#

My suggestion at this point would be to repost this in software help and see if one of the software guys can check it out.

reef radish Oct 23, 2024, 6:41 PM

#

@fossil star If you ssh into your pi and run ls -al in /home/pi/klipper/klippy/extras directory does it show the links back to the AFC extras folder?

fossil star Oct 23, 2024, 6:59 PM

#

reef radish <@804776827792916510> If you ssh into your pi and run `ls -al` in `/home/pi/klip...

fossil star Oct 23, 2024, 7:27 PM

#

What do people enter with the hub cutter after the update so that the cutter runs?

reef radish Oct 23, 2024, 8:19 PM

#

I don't use a hub cutter, mi have a toolhead cutter. Maybe I should build one just for testing software purposes.

fossil star Oct 24, 2024, 6:18 AM

#

reef radish I don't use a hub cutter, mi have a toolhead cutter. Maybe I should build one ju...

I don't understand why query doesn't show when there is filament in the hub, but it does on the Klipper interface.

fossil star Oct 24, 2024, 6:56 AM

#

reef radish I don't use a hub cutter, mi have a toolhead cutter. Maybe I should build one ju...

here take a look Lane 1 dosn`t show loaded to hub . At the end it shows loaded to hub : True

fossil star Oct 24, 2024, 7:30 AM

#

it dosn?t work

#

no form tip , no cut ,

fossil star Oct 24, 2024, 11:00 AM

#

Form tip Works. Cut works too

#

But I still don't understand why it shows loaded ti hub no at the line and further down : Hub loaded true

reef radish Oct 24, 2024, 11:52 AM

#

Do you have a lane loaded into the toolhead because it shows that there isn't but hub_loaded is true. Hub loaded and current load should always be set together. If you haven't done it already unload all your lanes, then delete the vars file and restart klipper

fossil star Oct 24, 2024, 12:04 PM

#

I have delete vars file. Show my last picture here. Leg1 loaded to hub : false system hub loaded : true why???

reef radish Oct 24, 2024, 12:13 PM

#

You don't have an AFC.vars file inside your AFC folder?

fossil star Oct 24, 2024, 12:24 PM

#

I have a afc.var file when i start the bt

fossil star Oct 24, 2024, 12:25 PM

#

reef radish You don't have an AFC.vars file inside your AFC folder?

Should I take a screenshot and post it?

#Problem Test Lanes and Hub Cutting