Yeah the smallest in this set are M3x6x5 and I think you're using M3x4x5, so a whole 2mm longer
#Delta Turtle [BBT-06]
amber tundra
steel dawn
Happen to have a Orca profile for this thing btw?
hearty viper
Happen to have a Orca profile for this thing btw?
Is this what you want?
steel dawn
Will give it a try in a few. Just got this thing setup
Not sure what I'm going to do with it yet
worldly holly
You are going to go into the cfg
Change the mesh size to 21 or 25
Re do the delta calibrate, and then mesh it
Wich will take an hour
Then
You are going to go brrrrrrrrrr
amber tundra
25? I didn’t do that I don’t think…..
steel dawn
like change the roube_probe_count? [bed_mesh] speed: 50 horizontal_move_z: 23 #This value is related to the lift height of the nozzle during bed_mesh mesh_radius: 148 mesh_origin: 0,0 round_probe_count: 7 # 7*7 algorithm: bicubic
Sorry for hijacking your channel @hearty viper but this seems to be where are the Delta stuff is at 🙂
worldly holly
round_probe_count: 21 # 21x21
worldly holly
It’s a delta
You want them
You only have to do it any time you take the arms off
Wich should be every weekend people
amber tundra
Why?
worldly holly
You SHOULD grease the ball cups once a week
If you want it to be head ache free long term
amber tundra
oh, luckily mine hasn't been used enough to warrant that likely lol
but I'll remember that
worldly holly
amber tundra
lol for real
Glenn either been working too much, or hardcore into designing that tool head
steel dawn
Figure out how I can put this on there
amber tundra
I been thinking about it......but also been thinking about a setup with the PZ Probe to make a better tap solution lol
the closer you can get the test probe to the nozzle the better on a delta
so making the nozzle the test probe would be most ideal haha.
but chube is very cool.... I wonder what all the metal weights compared to our stock stuff though
worldly holly
Have a custom effector plate CNCd
amber tundra
yeah maybe lol
hearty viper
Glenn either been working too much, or hardcore into designing that tool head
I was on the verge of getting shitcanned this week. Had to focus! Aaaaaaaaaaand, still doing a little design work! Lol.
amber tundra
Oh are those pla?
hearty viper
Oh are those pla?
The test body was as I was getting everything prototyped.
amber tundra
looks chonky
hearty viper
It’s compact. But I wanted enough width to be able to cover the control board.
Very little room for the filament cutter mechanism though. Which was the whole main point of building this.
amber tundra
yeah
are you going to be able to fit it still? Or have you just not worked that out yet?
hearty viper
are you going to be able to fit it still? Or have you just not worked that out y...
It’s there already. Just have interference from the fan on one side. You know what would fix that?????? CPAP! 😂
amber tundra
true lol
hearty viper
Ended up with a fully functional and smooth loading toolhead, but I didn't care for the design. That and the cutter were not in a functional spot. So been working all day on a full redesign. Limiting it down to 1 filament sensor before the extruder. Extruder is moving up in this build closer to the top, with the stepper moving above the gear. It will not be as fat, and elongated out quite a bit.
hearty viper
New design in. Needs a top half shroud with logo and lighting. I'm at 402 on the weight. Need to get this on the machine and tuned, to see how well things work. Vendetta 2.0
hearty viper
Knomi will have a printed insert in front of the fan on the lower. Room is left for it now. And the upper will just enclose off the extruder and tie in the shape. With LED's of course. Lol. That new filament switch is sooooo smooth! I can hear it, but you don't feel any resistance.
amber tundra
yeah it's a really nice design
hearty viper
Only 20 grams over stock from our weigh in before. I was expecting quite a bit more.
hearty viper
I should be getting a buttload of ASA today. Ambrosia.
hearty viper
Small independent non-3d printer employed old man. So like 6 rolls! 🤣 Not your level of buttload!!!!
neon wind
(it is SO NICE not having to stress about black filament again)
hearty viper
My first time trying ambrosia. So I figured I'd give it a go.
amber tundra
It's decent...most of the time lol
the CF-ABS and Dolos has been incredibly wet......
err PC-ABS
something like that
amber tundra
My first time trying ambrosia. So I figured I'd give it a go.
what was your github? I must of closed it on accident lol
hearty viper
amber tundra
I ended up finding it a few minutes ago when I was going through all my tabs and closing stuff lol
hearty viper
Should I start uploading some of the printhead to printables or wait?
amber tundra
can if you want, you probably should figure out github though too lol
I can probably print them this weekend, hopefully all my box turtle stuff will be done then
hearty viper
Yeah, I think I am trying to commit too much bandwidth at once.
amber tundra
maybe, the nice thing about github is you can just sync the folder and it'll put in the changes so you don't have the manage files the same way and what not
amber tundra
@hearty viper did you get the face and stuff printed?
hearty viper
<@1223053608149319794> did you get the face and stuff printed?
Got everything done again. I need to design some reinforcements on the cutter arm. But the main body is good to go. The arm hinges off of the front lower shroud. The force snapped the thin part it was on. But the mechanics are now solid for the cutter. The leverage of the fulcrum!!!! Lol. It will be one screw to remove the arm and access the cutter button for blade replacements.
hearty viper
That I have not done. But will be coming off the left extrusion from the front. A plate with and arm extending out parallel to the back.
The cut will be with a X move to the poker. Depending on how high or low you want to mount it.
hearty viper
amber tundra
yeah it's fine was just curious lol
hearty viper
And it puts it so that the can cable and usb clear the stepper.
hearty viper
No, It's the same width as the stock.
More height to it though. But not alot. Only one filament sensor helps.
amber tundra
I mean you have lots of height extra lol
hearty viper
Question on the camera. That would need to run back to the pi over USB right?
hearty viper
Oh nice. Did you shoot me a link for that one? The cable?
hearty viper
So you need to wire it to a usb connector?
amber tundra
probably, I think they have them with little screw terminals
hearty viper
Gonna look at this EBB42 board specs. I wonder if it can be wired to the board and run back over can?
hearty viper
Worth a look I guess! How lit up should the printhead be at the nozzle?
amber tundra
I'd show you on my voron lol....
but it can't run the LED's right now
you want light shining right at the nozzle though I think
the stealthburner uses 2 RGBW leds aiming right at the nozzle
hearty viper
I've worked a led into the front shroud under the effector plate to light it up from the front. But don't know if I should go for like Christmas Vacation lit up! Lol.
amber tundra
well there is a version of the camera you can get that has 2 LED's sticking out the sides
should be there in the cad files I imagine
hearty viper
Gotcha.
amber tundra
I figured that 3D0 cable would be good enough cause it's still pretty thin and the one end needs to be crimped anyways for the camera board
hearty viper
I figured that 3D0 cable would be good enough cause it's still pretty thin and t...
Oh, It's a crimp at the camera. Nice. Ok. Might be able to figure something out.
amber tundra
yeah the little PCB has a connector on it for USB, it comes with a cable normally but we can technically order it without the cable lol
cause it's al la carte you pick the parts you need
hearty viper
The new toolhead and accessories for the V400.
neon creek
Ugh I have enough projects now your adding more
hearty viper
I don't know what @worldly holly meant by he hopes this can bring his back to life. Did something go wrong with the stock setup?
neon creek
he has 2. one that is stock and one that he has built up for speed. I think hes talking about the speed one
hearty viper
Ohhhhhh. Makes sense. Only a PID tune on this so far and works great right out the box. But I will get into settings a bit more after my spare is printed.
neon creek
awesome! its looks bad ass
hearty viper
Hell yeah. lol.
neon creek
i dig the logo too
hearty viper
i dig the logo too
I let AI do most of that design work. Lol.
neon creek
Hey its a great tool is how I see it
worldly holly
I pushed the other so hard it sheared the bolts from the effector…
The extruder/heatsink.
need a new effector pretty much
The one that’s still good was my work horse until I got the micron, now it’s a dedicated TPU machine
hearty viper
Mass production complete. The only thing needed when switching to the backup is a swap of the UUID and a z-offset swap.
hearty viper
Having too much fun with the new label maker. lol.
steel dawn
Those look nice
amber tundra
sometimes....the labels make it hard to shove all into the tool lol.
hearty viper
Lol. Just found that out!!!!🤣
amber tundra
lol
neon creek
Whoa what’s up?
hearty viper
Totally smoked a new EBB42, but everythings good now! Lol. Flames shot out that bitch!
neon creek
👀
hearty viper
Back on the amazon list to grab one more. Lol.
amber tundra
what happened?
hearty viper
I think a capacitor was pushed loose or something. I just know flames started shooting out the back of the board!
amber tundra
wow
hearty viper
Yeah scary! Everything is fine with the rest of the system, thank god! Just need a new EBB42 for one of the toolheads. The other one is fine though.
hearty viper
Final weigh in. A little heavy, but not too bad.
Box of galaxy black for the new build............. is this supposed to be in the part? Lol.
neon creek
Support pop it out
hearty viper
Support pop it out
Yeah, just figured it hadn't been asked enough! Lol.
neon creek
Like the galaxy black I got a roll for my next one actually
hearty viper
Did you upload that stuff yet?
The new toolhead????
hearty viper
I attached a zip file in this thread. Just scroll up to VendettaV3
hearty viper
I can't get things to load to my Github.
amber tundra
hmm
hearty viper
I think I need to pay for more. It time out errors on me. I'm a newbie to Github.
amber tundra
yeah it's been forever since i set stuff to upload on there
you just use voron settings?
hearty viper
Here's the metallics that are going to be the accent gears on the new turtle.
hearty viper
you just use voron settings?
Yeah, the standard 4,4,4 24% infill.
Hopefully I will have a half assed guide ready by the time you assemble something. Took some photos to try and clarify some stuff.
amber tundra
24% that's an odd one lol. Voron is 5/5/5 40%
hearty viper
Ehhhh close enough. Lol.
hearty viper
Yeah, should be. And have supports where needed.
amber tundra
yeah I see on the main body there's a big support
your accent things are a bit weird......some of the folders have (a) and then some of the files do to
hearty viper
Yeah. I was just gonna label the parts, but then I threw them in folders to try and organize a little better. Accent or no, is up to you for sure. Just what I came up with.
amber tundra
lol ok
fleet ocean
Dude galaxy black prints look sooo good
hearty viper
Disassemble to this point here. This is the shroud assembly.
Here's the body and cutter arm. 2 small bearings.
amber tundra
does this point at the nozzle? Probably could widen it a bit to fit the nozzle cam with the 2 LED cable lol
although would still have to make a spot for the DSP board
hearty viper
Yeah. I don't know if the heat block is in the way of the very tip of the nozzle though.
amber tundra
oh ok
I haven't put eyes on this stuff yet so can't say much lol
gonna attempt to print a couple of the parts here, we'll see what happens. Waiting for my fabreeko order for my new build plate
hearty viper
Might be room at the rear?
amber tundra
looks so much smaller when you're holding it lol
neon creek
amber tundra
you could also extend that nose out a bit more probably so it hangs down lower but yeah not sure
hearty viper
Oh, almost forgot. 35mm capricorn PTFE tube connects the body to the metal heatsink.
hearty viper
Do you think the Steampunk turtle is too much? Lol.
fleet ocean
Nah!
amber tundra
that's a turtle?
hearty viper
Yeah man! Lol
hearty viper
Ok. No magic fire shooting out the back of this one! Let’s hope!
amber tundra
aww but the smoke wants out
hearty viper
Oh you sexy sexy beast!!!! Lol.
neon creek
i think it winked at me
hearty viper
It's not modest!
hearty viper
First load from BT with a 1 layer circle to set my z offset. I hope I didn't forget any parts when assembling. 🤔
amber tundra
Oh you sexy sexy beast!!!! Lol.
Now you need to write a custom firmware for Knomi to make it cooler
hearty viper
Now you need to write a custom firmware for Knomi to make it cooler
Shit, now I gotta learn to code????? Lol. I'm an old ass construction worker!
amber tundra
lol
I didn't know you worked construction
I'm not all that young either, I wish I knew how to code, but I'll look around and see what's out there lol
hearty viper
Ramping it up to make it go Brrrrrrrrrrrrr. @worldly holly would be proud! Lol.
amber tundra
I printed some of the parts, but this beds gotten so bad that it's lifting while holding onto the PEI lol
so it's just making more bubbles
hearty viper
I just got a new plate for this one. Smooth on one side and textured on the other. Amazon purchase.
amber tundra
yeah
just wonder how long it lasts
apparently the big problem with a lot of these plates is they use 3M adhesive which is not rated for 100c+ temps
hearty viper
Every print lately has been at 100c. So I will see.
amber tundra
yeah as we usually do 🙂
hallow vault
Might be room at the rear?
Looks sharpc
hearty viper
Alright. This Beta build has been decommissioned in preparation for a new build. Too many old parts, and PLA-CF on top of that. Nothing broken to this point, but I would just like for the parts to be of the new design. Probably get a new one enclosure ready. Sealing off the top of the V400 for better chamber temps too.
fleet ocean
So PLA-CF still going strong then on the motor plates?
hearty viper
Appears to be fine!
The only real marks are where the mounting screws dug in a bit. But the motor was not loose at all.
tidal mirage
No shims aye
hearty viper
Shims? For where? I could have used a washer, but wanted it to dig into place once it was set.
tidal mirage
Right, nah I though in the cad there was one where it digged in the plastic
hearty viper
Right, nah I though in the cad there was one where it digged in the plastic
Oh, not sure. I had to re-print these so many times. Because parts were changing daily on the beta. Lol. So I'm sure this was the final version of the beta build. That had to be a few months back now, right? We've been doing this for a hot minute. 2025 will be the year I jump into my first printer build of a 2.4
hearty viper
Starting the re-make of BBT-06.
fleet ocean
Dang your designs are coming out nice!!!!
strong plaza
accel
rocky stream
Oh you sexy sexy beast!!!! Lol.
Whaaa love that toolhead ! I was searching one for my V400, found my inspiration haha
sullen prairie
Do you have a short video on how the cutter is enabled?
hearty viper
Do you have a short video on how the cutter is enabled?
The cutting arm engages a mount on the delta arm by moving all the way to the left.
sullen prairie
The cutting arm engages a mount on the delta arm by moving all the way to the le...
Any print area or travel loss?
hearty viper
Yeah. You can spin the button on a single color print so it is out of the way and not really loose print area. But most of my multi color prints I won’t put past the 100mm mark on the left in Orca. Right, front, and back, are all usable. @sullen prairie
hearty viper
I'll try something similar on the Sr
The little arm mount is on my GitHub too. You can grab and modify if it’s easier.