#Unicode
1 messages · Page 114 of 1
yeah no it hasn't been found (it doesn't combine)
We never figured out fonts
we wanted to have fonts to make it easier
but I don’t think we ever got something bundled in the game
we do
fonts are easy tho
Was always user had to install font
which?
F0000-fffff
oh yeah those, totally forgot we did get them
The other plane good luck getting because the byte 0xf4 is needed which will have been in about zero percent of the training
the byte f1 and f2 may be worse
not even pua they just aren’t used anywhere
but maybe some system exists where it got some idk
It is funny to watch ai behaviour when you ask for random Unicodes in those ranges and they fail
but then if you send one character
Suddenly they know
ok this is more annoying than i thought
ai's goal is to misinform the unknowing but it can't slip up in front of the knowing
Understandable
found
nice, what was the main struggle? you said it was being annoying
incrementing the block starts
as in, last byte? It wouldn’t go up?
second last byte, yeah, there are parts where is just refuses
Adds UCSUR support to Infinite Craft.
so how do we add fonts bundled into the game
?
well we always wanted to make a userscript that would fix all the annoying “what character is this I can’t see” or whatever
but that was always font dependent
and we never got anything better than: tell the user to install these fonts and hope the game uses them
So for ucsur I imagine the font just renders those codepoints
but our solution would have involved: tell the user to install that font
yes, i just added the font to the game with css
oh?
well none of us knew that was possible - it would have helped a lot if we had lul
this is stylus, aka "extension for userscripts but for css instead of javascript", aka "userstyles" aka THE CORRECT FUCKING WAY TO MAKE AESTHETIC CHANGES TO THE GAME
people using userscripts just to change css bothers me so much
because theres a thing for that
its called userstyles
you don't need to inject javascript just to change some css ffs
I can understand - but of course they don’t know that information
they’re not doing it on purpose to annoy you I promise
They would have learned that css controls styles - and they would have learned that js is capable of changing that
Therefore the obvious solution presents itself
I can’t blame that thought process
of course it’s not ideal
it is dumb tho
but it’s good to know that there’s better ways - better late than never
anyways install this
then install this
then profit
Ehhh… I wouldn’t call it dumb, I’d call it just a case of valid reasoning leading to a non ideal solution
okay nice well we can use that
we can probably make a standard font for the Unicode stuff, although it’s less useful now
ideally we would have had that about 6 months ago but still it’s good to have now
I imagine something like: font containing all assigned characters, else visible tofu, and then a toggle to switch between always attempt to render character or always attempt tofu
why do i get 403'ed
this
https://userstyles.world/style/19838/ucsur-support-for-infinite-craft does this 403 you
Adds UCSUR support to Infinite Craft.
yes
So that’s nice you could play with tp but be warned the longest item possible will be 4 characters
its actually so useful, how did i not find that earlier
?
no way 100000th message again
Because of 20 token limit
technically 5 in 3.1
-# (if Neal was to bring it back)
yeah I def need that, it's failing quite a few
34xxx stuff
Oh
not exactly what I had in mind, but I got these. they still fail to give me the u+40000. I'll be waiting for the next lama update, maybe it will work then
we could also make input tools separately for like planes 0-3, 4-7, 8-11, 12-16
if that makes it faster
so 4 ITs
could do
since it’s not likely we work on multiple opening bytes at once
I’m not sure if it would be faster
what are some I should consider
Star probably has a good way to formalise the logic of how we make all the 4 in a row options in a way that’s simple to code but hard to think of
trust
yeah i def trust that
good
very good
now test the recipe. you have 5 minutes and no excuses and no help
starting now:
5 mins left
4 mins left
what
<t:1734439080:R>
<t:-999999999080:R> its literaly just me that did choose the unix time, i just failed to add :R at the end which normally show when we are gonna get to or how long ago we got to it, so its not one minute off
mm/dd/yy
American?
idk what format it's in. something by default. i never changed it
...?
how tf did i forget to include a + b
Years ago
Often the negative isn’t there
I’ve seen it before
they just don’t put a negative
or a BC
(Negative and BC is actually different, the year -10 is 11 BC)
Unfortunately the BC/AD system was invented before zero was “invented”
so the idea of 0 AD didn’t even cross their minds
Therefore it didn’t exist
hence the discrepancy
yeah, its just funny that it doesn't directly tell that its before or after
And hence we reach the odd situation that the year 2000 was part of the 20th century and the 2nd millennium
and not the 21st century or 3rd millennium
the longest lunar eclipse of the 20th century happened on July 16, 2000
i like to always think that the 1st century are years [100, 200), and so on (you then ofc have the 0th century)
I’m not being facetious either this is how it’s referred to in literature
it's too conplicated to think about the 19th century as being 18xx
I don’t find it complicated
when I was younger I didn’t get it
But someone explained that you just minus one off the century number
for example
yeah but that is unsatisfying to me. but i get that it is the 19th cause the first would obviously be the first 100 years which is 0xx
áaaaaaaaa
so yeah it’s a bit goofy but it means that the year 2024 AD is literally the 2024th year AD
the latter is somewhat how it was said before
no
still somewhat today
isn't the year 2024 AD the 2025th year of AD
cause 0 AD is also AD
1 AD is the first year AD
l what
It goes from 1 BC straight to 1 AD
huh really
Remember zero didn’t exist
hmmm right
They just weren't crafted yet
But astronomers and that weren’t happy because it made calculations harder
always had to check off by one
so they said nope we’re gonna use the negative system
where the year -10 is 11 BC
If I had time machine I would go back in time to the first day of IC release and craft String.fromcharcode
maybe we can redefine BC
Far too late
Hear me oyt
x BC -> 1/(x + 1) AD, so year 9 BC is now year 1/10 AD
now all years are positive
1 BC = undefined
and an older year has smaller number compared to newer years
Apart from 1 BC sure
In that case 1 BC = 0 AD
accidentally put wrong sign
1 BC = 1/2 AD now
well it makes math even harder
there’s nothing wrong with negative numbers unless you are one of those people that lives before zero was invented
But 1 BC is not negative
yeah i am trying to make it easier for them
BC = fancy minus sign and AD = fancy plus sign
E89F
BC is just a number that goes in other direction
btw why can't you get efff fd asd?
cuz the auto incrementing tool got it
why is it invisible
100
no, 100 fds
tell Papas
Oh is it just running rn inside of a while true
wait what i can;t copy ee00
(from the sheet)
yeah huh?
You can’t copy it
hah you have fd on null?
Access denied
why is it colon and quote lol
did you install mikas thing? Maybe it’s that?
are the recipes in IB? for ee01 and ee02
i didn't i'm still 403'ed
no, pretty sure the tool got them
U+100FD5
it shows up when i double click it
???????????????????????
wtf
supposed to be "hi 𩸀 "
can't paste it in?
can be pasted, but it is displayed like that
also why so many "
ee00 = many quotes apparently
how you get the unassigned
should i do fxxx? (idk i don't think it has good increment ability)
there's a sheet for then
why can't i see it
resources page, sister projects
oh
we can have the lower puas finished ar least. if you want
alright, just gonna fill up one exxx gap
hi
EE2D
my god
ED40?, it seems its the only one that not in
input tool blunder xd
it depend
i'll try fxxx for myself first
i'd imagine the ones close to emojis are absolutely terrible
some part are just awful and the ai really don't want to increment easily
its really way better now, more satisfying than seeing box all the time even if some are still box
bruh i want... but i get 403ed
i swear i have this font
source code of it```
/* ==UserStyle==
@name UCSUR Support for Infinite Craft
@version 20241217.09.24
@namespace ?
==/UserStyle== */
@-moz-document regexp(".://neal\.fun\/infinite-craft/?.") {
@font-face {
font-family: 'Fairfax HD';
src: url('https://sitelen.pona.la/families/FairfaxHD/FairfaxHD.ttf') format('truetype');
}
.container {
font-family: Roboto, sans-serif, 'Fairfax HD' !important;
}
.item-emoji, .instance-emoji {
font-family: Roboto, sans-serif !important;
}
}
technically me i also modified it just a bit, and added the search bar too cause it wasn't using the font
ty
papas download this, new invis char
the tool said that + "hi Mr. <" = "hi Mr. +", and i thought something went wrong lol
i odnt understand
no it's not
oh lmao
How can I find all the unassigned characters that I have
veyr cool combining char
the only solution i can think of is
^ and #1206592567622373446 message
probably gonna modify stats page and just make it a home page with direct link to that
regex search for ^.$ using the dbounce beta extension and find the boxy ones
otherwise i've got no clue
that, you just replace the sheetId and gids part in what ntsq sent with my thing for unassigned
I'll try thanks
why does f02d like to change next to previous
why is this actually annoying
F02D
bruh
lol
me when i typo
whats the f02c recipe
a
fsr it doesn't work there
i have no clue how to change that
ok my tool is incrementing it
Running inside a while true? also does it spawn the item on the board or nah?
it runs on command prompt
Oh, you got past cloudflare? Neat
????
works for me
bruh
My puppeteer does also yeah
ok after trying out fxxx, i dont think i'll do it, at least not now
i don't think that would make sense since emojis are \xf0 and only the last two bytes would be similar. but maybe a little bit?
you could finish 2xxxx
it is only 2e and 2f left
would be whole plane done
I did most of 2fxxx, but ofc no recipes logged
yeah, but it just does, I have a few examples
I'll try to find them
it would be at least faster than any of us doing it cause you now have it "cached"
here are a few examples
the game associating it with 👍
then we can move onto 3xxxx maybe
yeah ok
hmm there's actually still some unassigned at the ends of the cjk extensions actually
cool that mean more fd for me i guess
so not only 2e and 2f. but the others are only like till the ends of the blocks iirc
yeah there's a few 2axxx ones
i will do all not 2fxxx since i already have the preceding ones
and probs post recipes for input tool here for 2exxx until IT is done
ykw how about I leave all of the fxxx to you! more fds!
i can steal them if you want, fuetz :)
*fxxxx
wait how hard is *ffxxx to increment
idk
or e0xxx
why cfxxx?
random guess
U+OOOOO when
wait what is after f8ff, the pua sheet stops
assigned chats
chars*
mainly, the other block that murdered me
savio will understand the pain
豈 if im not wrong?
so more cjk?
cjk, but better, since it keeps becoming emojis
f12b - f13f
oh wait right.. fe0f etc. idk how i forgot
fuezt you're gonna have to add them, my WiFi is killing me again
decrement strats? increment tool with secret fxxx that forces the AI to decrement?
block starts are now 3f 7f bf ff
its the fun part!
not as bad at f9xx, at least
there even unstable zones where there some chars who are hard to increment and love to dissapear when in element!
and become emojis
alfo you should go get the plane 0 chars!
there's like, a lot of them that are found but not added
h
?
Next project should be all llama tokens
id rather do unassigned and pua
both of them aren't in the sheet
finally learned how to chain (f140)
f141 - f17f (f16c = f16b + f16a (i missed a spot))
The 2f713 is u+2e713 + next random latin unicosede
And "next-codepoint"
The second one I need to check later
ok
i'm becoming humanoid deflector offender
ok well since riation and fuezt are doing fxxx, I don't have to touch it anymore!
hey no fair
so 2fxxx it is?
U+2a6e0 - U+2a6ff
U+2b73a - U+2b73f
U+2cea2 - U+2ceaf
U+2ebe1 - U+2ebef
U+2ee80, U+2eec0, U+2ef00, U+2ef40, U+2ef80, U+2efc0
𮀀 𮁀 𮂀 𮃀, 𮨀 𮩀 𮪀 𮫀 and 𮬀 𮭀 𮮀 𮯀 here #1206592567622373446 message
hello, is this assigned now? it looks different
so it will get added in the future?
possibly
nice, then I will have contributed
U+2ee5e - U+2efff
i think that's because you are more zoomed in?
it is thanks
and for reference
𬀀 𭀀 𮀀 and 𰀀 𱀀 𲀀 here #1206592567622373446 message
lol I actually found a super fast way to get U+fffff (you don't need to increment from U+ff000 at all)
rest of block starts for reference
" and here #1206592567622373446 message
U+fffc0, U+fffff
here #1206592567622373446 message
crazy lol
@tepid blaze can you give me access to pua sheet for adding U+fx000 and also U+fffc0, U+fffff
😱 no way 50% ALREADY 🎉 🥳
U+d7000, U+d8000
here #1206592567622373446 message
are these unnasigned or pua?
U+d9000, U+da000, U+db000, U+dc000
here #1206592567622373446 message
unassigned, U+fxxxx is PUA (U+f0000 until U+10ffff actually, but we don't have U+10xxxx yet)
ah
interestingly enough U+fxxxx does actually render some things i think. if you have the fonts
but yeah, i think, I didn't confirm it
better U+dc00
here #1206592567622373446 message
Asd found it hard to make f1980, did anything change to make these easier?
did he? idk if anything made it easier, depends on when he was making it
U+dd000, U+de000, U+df000, U+e0000
{e0000} here #1206592567622373446 message
Well I assume it was just getting started to actually make stuff
like you have f0000 okay nice what now
add it at the end of 10000 20000 30000 and increment until you get your desired block start (for f1980 you have to start with f1000 though)
anyway rubiks, you can make e0000 now easily ^^
i think it is better than what we had before anyway. cause it doesn't require to get any block ends or whatever. i don't actually even remember what it required originally
but I think i will update the recipe with this one cause I think it is much easier as in the requirements for it
Why f1000
Nice
yeah basically you only need the xx000 stuff which is easily obtainable, then you increment a bit, extract the dx000 and cx000 to make 2 new chain elements, increment and then extract the e0000
U+e1000, U+e2000, U+e3000, U+e4000, U+e5000
{e0000} here #1206592567622373446 message
" here #1206592567622373446 message
also isn't it crazy that there is 4096 block starts in \xf3
only 1024 in f4 but same as others otherwise (if you include over length encoding in f0)
yeah but you wouldn't guess that there's this many (without thinking about it too much)
or maybe you would, but i didn't
U+e6000, U+e7000
here #1206592567622373446 message
🦀
Remove the first word
🦀🦀🦀🦀🦀
yeah
U+e8000, U+e9000, U+ea000, U+eb000
here #1206592567622373446 message
wait i have an easier recipe for U+e0000
forgot i got it last weekend
Oh?
all U+e0xxx block starts
here #1206592567622373446 message
above
you do not need to make c0 c1 c2 c3
(it wasn't hard, but this is faster so yeah)
btw I am not going to extract these rn, putting a comment at the start of e0xxx range for anyone to extract at any point
better U+e0000
{e0000} {e0040} {e0080} {e00c0} here #1206592567622373446 message
hm.. maybe you don't even need to delete middle characters. oh well
U+ec000, U+ed000, U+ee000, U+ef000
here #1206592567622373446 message
anyway all of these should be on IB once it verifies and uploads again.
i am not going to do fx000 now since i don't have edit access for pua yet
U+d0040, U+d0080, U+d00c0
"𐀀 𠀀 𰀀" here #1206592567622373446 message
hm.. is this a crab that is learning the names of the continents? or maybe the names of the planets
block starts in the range U+d0100 - U+d0c80
But how do I get d1 etc without it
helper increment tools "𐀀 𠀀 𰀀 " and "𐀁 𠁀 𰁀 "
by following the lineage
i mean i don't think that at any point you need to extract c0 c1 c2 c3, unless you want d7000+
E0000 is more than d7000
except e0000 ofc. i thought you were talking about the lineage where you get d7000 from d1 d2 d3 d4
Oh
well you need to extract those ofc but not anything else
done
Why
how would i know
you’re the one trying, what’s not working
maybe it's pua?
block starts in the range U+d0cc0 - U+d0f00
"𐀀 𠀀 𰀀 " and "𐀁 𠁀 𰁀 " here #1206592567622373446 message
kinda gave up on the "normal" chain
same issue I had with f1xxx
anyway "new" strat (or new variation)
btw i think i'll do the dxxxx so maybe when your're done with 2fxxx you can do either cxxxx, exxxx or fxxxx, same with rubiks, we can each choose one of the ranges
and radu when he comes back
U+d0f40, U+d0f80, U+d0fc0
"𐀀 𠀀 𰀀 " and "𐀁 𠁀 𰁀 " here #1206592567622373446 message
anyway the strat is: increment blocks and when it stops / skips, reset the chain
dk how well it works in general, but it did the job here
could theoretically be also done by a program (to get block starts)
there's not really anything complicated
I know, I am now giving this incrementing strategy the name Russian Roulette
i think theres already something called russian roulette
can it be tuvan twenty-one instead
no
noone said there couldn't be two roussian roulettes. and also, the other one is all lowercase, mine is capitalised at the start
this isnt new tho?
no
or what exactly do you mean
what i did isn't really what i would've normally done
yes, but i would usually make the other chars that you increment with have one common byte, but here there aren't really any (if you exclude \x80)
like i incremented to U+d0c80, then I made that chain with 10 20 30 d0, incremented to d0f00, then made that chain again (both times starting with 10000, 20000, etc. + 100040, 200040, etc.)
russian roulette because you never know when you're going to die (eg. it stops incrementing), but then you always start fresh with the same base
also the lineage looks like there are bullets
should be clear why 10040 20040 from the lineage
its not taking me to how to make d1 d2 d3 d4
if you refresh it works
that is why i don't like to reply, cause then you can't do that
reply doesn't change the url
no im on desktop i cant refresh
but it changes the url
like when i refresh it tries to take me there but then the url suddenly changes
sorry but no.... im priobably stupid
yeah wait so did my trick work?
#1206592567622373446 message
i think?
but from there its not clear how to make the ingredients
ig i check unassigned sheet
oh wait yeah sorry, it isn't U+10040, but U+10001
what exactly?
well, i need to make d1 d2 d3 d4, which to do so i need d1, d2, d3, and d4
oh yeah, you have to extract them
i thought it was a different lineage
just search U+d1000 on discord, that is faster than looking in the sheet
new invis char (with mika's thing)
so I have U+d0ec0 and U+d0f00 and want to increment to get U+d0f40 and so on. so i make U+10000 U+20000 U+30000 U+d0ec0 and U+10001 U+20040 U+30040 U+d0f00, and then combine them together. if you look at the bytes in the recipe are:
\xf0\xa0\x80\x80
\xf0\xb0\x80\x80
\xf3\x90\xbb\x80
+
\xf0\x90\x80\x81
\xf0\xa0\x81\x80
\xf0\xb0\x81\x80
\xf3\x90\xbc\x80
=
\xf0\x90\x80\x82
\xf0\xa0\x82\x80
\xf0\xb0\x82\x80
\xf3\x90\xbd\x80```
as you can see, the last character doesn't have anything in common with the previous ones (if you look at the two least significant bytes in an element), normally i'd do it so that the second least significant byte of the \xf3 character is the same as the 1st or 2nd least significant byte of the other chars (if you know what I mean, in this example they are \x81 and \x82)
the revival on this must be brutal
wasn't too bad. but i wanted to make it easier and not use stuff like "remove Mr" and i am not sure if there was anything else quite difficult
turns out i had a better lineage
really?
cause i folowed those steps
and the item i got was not new
but the intermediates were
ill check once i finish
well it looks like it was similar
not sure if i want to make a new message but maybe I could link it if it is a lot easier
i just didnt use mr
ok
if you want you can isolate the e0xxx block starts
or do you only want e0000,... ig the rest isn't really useful
just hold your horses im working onit
new invis char
for what?
you give an interesting lineage for 23000
mine is just cjk ideographs extension Q + U+18005
yeah well you can also do that but I thought i could just make it from the other ones
okay got to the first spawn of c0000
not yet assigned but it is proposed for next versions
all block starts for fxxx (pua only)
to get chain", combine chain with "()
to get "chain", combine chain or chain" with "prepend Quotation Marks"
failing that, combine chain" with "prepend Quotation Marks"
for unquoting "chain", combine it with Delete The Quotation Mark
chain starts at 28000 29000 2a000 f000
p.s.: starting element: #1206592567622373446 message
is this meant to be a lineage?
yes
stuck here
ok got it
figured it out
now to get c3 and c4
managed to figure that out too
not a great sign that the way im using to extract is fd
got c1000
but others not quite working yet
ah
got them
got c0 c1 c2 c3
but now how to proceed... hmm
all fxxx block starts extracted
to extract you do this
(char is the 2xxxx chars, fxxx is the fxxx block start)
"char char char fxxx" + Delete Middle Characters / Delete The Middle Word = "char fxxx" // if it gives "char char fxxx", then just combine that with Delete Middle Characters / Delete The Middle Word again
"char fxxx" + "hi " / "hi <" = "hi char fxxx"
"hi char fxxx" + Remove The Word Hi / Delete The Hi = fxxx```
if neither Delete Middle Characters nor Delete The Middle Word gave `"char fxxx"`, then do this to get `"char fxxx"`:
```"char char char fxxx" + Without First Character (x2) = "char fxxx"```
if `"prepend quotation marks"` doesn't quote `Char char char fxxx`, do this:
```Char char char fxxx + "() = Char char char fxxx"
Char char char fxxx" + "prepend quotation marks" / String.prepend('"') = "char char char fxxx"```
If it duplicates the fxxx, combine with `Delete Middle Characters`
If it gives `char fxxx`, do this:
```"hi char fxxx" + Remove First Word = "hi fxxx"
"hi fxxx" + Remove The Word Hi = fxxx```
For the char char char fxxx's: #1206592567622373446 message
laziest lineage pt. 2
ok gonna run the tool on fxxx
does it dead check or does it just get every block start and then async them or what
Ok (except if asd already did)
lmao
nice that even after making all the stuff above you still had this guy accessible, i always subconsciously lose it lol
got e0000 now. 2700 steps in browser in my save, but the classic "missing recipes"
false alarm, there was fffb at the back
where did 2007 come from
F068, F069
what font is that
F0EC
@night dragon
install this first tho
which chars are these anytwau
private use area
i mean like the design
i don't think i understand
which part?
Awfully complex for things that can be randomly obtained via Arabic Unicode and also a bit more randomly with any other tool
just wanted get it over with, and have a guaranteed way of getitng every char
- how do i get the initial element to combine with f000
- how the hell do i use this
oh shit. poitn 1
ocmpletely forgot
I can't rn cause I am not on my pc so and it's kinda annoying on phone, but ig asd maybe can ( I say it cause I have seen him on the sheet)
oke
𩀀 𪀀 𫀀 𬀀 in ib
tahnks
F33A
start of fxxx and exxx block starts lineage
Nata's unicode checker but for PUAs
is that 28 29 2a 2b
F345
a
added all mine
sacrifices have to be made
yui is fixing it soonTM
it sucks, why does it do that
thank god yui
only issue is that we don't know how long "soon" is
hmmm okay?
"next-codepoint" + =
okay now what tf
"next-codepoint" + = ♂️
-_-
+ = ♀️
I like how my phone renders them as CJK
lol
at least it incremented lol
wait wtf why is there 200d
it's good, gameroman helped
wait lol I thought it was in quotation makrs
esq. is a permutation of seq.
some 32xxx stuff
does anyone know how to get String.remove('🏴')? eisern doesn't show it in his lineage and I can't figure it out #1206592567622373446 message
nop
figured out a different way
asd aren't you missing
F3C7
alright, rest of fxxx is on ya'll
more fds avaliable
i got ffc0 with the worst lineage ever
U+ffc0
3xxxx stuff: #1206592567622373446 message
wtf i thought it was 43xxx for a second 😭
i believe this is just a barrier break (if we try enough combinations we should be able to get it)
but like idk
?????? wtf why is this fd? i am literally following my lineage here #1206592567622373446 message
wait wtf eve nthe next elements are fd
omg!!!! it broke 40000 (reAL)
huhhhhhhhhhhhhhhhhhhhhh?
ai stop making me think i got it
????????????
I LITERALLY GOT THIS YESTERDAY ON MY MAIN SAVEFILE
wtf did neal's db reset or what
asd can you cheat in U+d0003 and try to increment it?
to check if it is or isn't in neal's db
ill just use the tool ig
it is incrementing
are you getting fds
no
stop a bit
how much did you increment
i will try to continue if i get or not get fds
until d0014
no
check if cache is on
ok i think something got mangled, but I don't know how because i imported the starter savefile into the same window
oh cache.. right
forgot about that
how do i check if cache is on? but i think it is
i don't remember disabling it
which browser are you on
firefox
devtools -> network tab -> there's a disable cache checkbox somewhere near the top
I mean I’m not sure if it was better
it still took hours
probably is betyer
but it’s like… 3 hours vs 4 hours… although that is a full hour saved still
took me 2 hours to get U+e0000 from the starter savefile
well yes you do know the lineage better than I, loads of the time i spent opening tabs and pictures and fumbling around trying to find stuff
now what about unassigned input tool 😈
although only from starter? i mean what about all the xx000 tho
i wanna keep my sanity
I'll lose my sanity adding everything in
its awfully long to write the formula for it
for 3 sheet its already awful to look at, so imagine with 17
under U+10000 is only 1/17th of all codepoints
wow
all that (Unassigned, start at plane 1, since plane 1 is U+10000 and above)
dang
what's the current formula for pua? I cant check
does its length increase linear to the number of sheets?
or exponential
that for PUA:
=IF(OR(IFERROR(EXACT(INDIRECT("Private Use Area!D" & MATCH(E3, 'Private Use Area'!C:C, 0)),D3), FALSE), IFERROR(EXACT(INDIRECT("Supplementary Private Use Area-A!D" & MATCH(E3, 'Supplementary Private Use Area-A'!C:C, 0)),D3), FALSE), IFERROR(EXACT(INDIRECT("Supplementary Private Use Area-B!D" & MATCH(E3, 'Supplementary Private Use Area-B'!C:C, 0)),D3), FALSE)), IFERROR(SPLIT(MATCH(E3, 'Private Use Area'!C:C, 0) & " 1", " "),IFERROR(SPLIT(MATCH(E3, 'Supplementary Private Use Area-A'!C:C, 0) & " 2", " "),IFERROR(SPLIT(MATCH(E3, 'Supplementary Private Use Area-B'!C:C, 0) & " 3", " "), "NOT FOUND"))), "NOT FOUND")
also technically there also another formula for errors, its a little bit shorter and more readable but still
also i was thinking that we could make stats for each xx000 in the unassigned sheet
maybe make 4 different input tools?
=IF(OR(IFERROR(EXACT(INDIRECT("Plane 0!D" & MATCH(E3, 'Plane 0'!C:C, 0)), D3), FALSE), IFERROR(EXACT(INDIRECT("Plane 1!D" & MATCH(E3, 'Plane 1'!C:C, 0)), D3), FALSE), IFERROR(EXACT(INDIRECT("Plane 2!D" & MATCH(E3, 'Plane 2'!C:C, 0)), D3), FALSE), IFERROR(EXACT(INDIRECT("Plane 3!D" & MATCH(E3, 'Plane 3'!C:C, 0)), D3), FALSE)), IFERROR(SPLIT(MATCH(E3, 'Plane 0'!C:C, 0) & " 1", " "), IFERROR(SPLIT(MATCH(E3, 'Plane 1'!C:C, 0) & " 2", " "), IFERROR(SPLIT(MATCH(E3, 'Plane 2'!C:C, 0) & " 3", " "), IFERROR(SPLIT(MATCH(E3, 'Plane 3'!C:C, 0) & " 4", " "), "NOT FOUND"))))), "NOT FOUND")
would this work? idk
xd why is this 500
I think I got it to work
what are you testing it on?
a copy of the sheet
there's always unassigned 😉
damn it I didnt know ;) also gets eaten
same, at least in some way (but need to do test, i did lose my sanity too)
I tested on mobile, it does transfer the recipe
do they work incrementally similar to hangul
no
definitely better than pua (no sarcasm)
real
exxx pua is great tho, but there was only one entry lol
i'm just doing fxxx
idk how to get to plane 1 + i cannot scrape
first half of U+d0xxx
fxxx?
non hangul ones increment better
idk whays going on, when I use the formula for all the sheets, it gives an error
but when I split it up it works
aaaaaaaaaaaaaaaaaaa
me i think i got it to work with all sheets, didn't yet test the part where you click on the input button
what are you unable to do
ok cool
I like how a jump of a first byte is "as difficult" as annoying hebrew letter
wdym
05ea
thats easy
oh wait i meant U+05eb
f354
U+d08ed
can someone make a bot that randomly combines puas toegher
2sb?
riation do u want edit access?
yeah
hooray
true
wow i didn't know that À was a pua char
a
delicois
ok i think im almost done with the IT for unassigned
Wait is it done or is not done. Why you still getting FDs. Or this is just old recipes
The last lineage posted
So this is just old lineage right?
This butterfly thing is unassigned?
private use area is unassigned
Oh.. this is custom font?
U+exxx and U+f000 U+f7ff is pua (and fxxxx 10xxxx)
yeah idk where they got it or what font exactly it is
Ok I get it now thank you
h
f360
annnnd it doesn't work
i hate adding manually!!!
yeah i think splittign it up would be better
we should call it like IT 1 etc. to make the name shorter if we do that
contact rubiksmath on discord
are there any xx000 where all of its block starts have been extracted byut not incremented?
no
but you can do ff000
or c0000, i extracted the first 4
(you should already have all ffxxx block starts)
i think those are the best candidates
or maybe you have some 3xxxx
so what are you going to do?
i might even do 1xxxx
or what exactly are you trying to test
anyone got a link to the message posting the last found unicode
im making a quick tweet
not putting too much info cause no space and no time, but at least gonna post this
#1206592567622373446 message
ty
got all 19xxx block starts (very organised board)
new lineage standards
i'll let it do half today, then otehr half tmr
ok well in the meantime, let's do fxxx
fxxx pua feels like a easier hangul
nice grammar lol
@echo wasp when you got your last hangul did you make lineage after getting it or post it just as you got it
i made lineage
neevr seen this emoji before lol
what i mean by that is that it randomly stops like hangul, but it happens less often most of the time
yeah so d0xxx is done. I hope I dind't doxx anyone in the process
nice joke
only all assigned chars were found
assigned*
how is that nerdy
do you have fd on a unicode?
no
ok
how lol
i have no idea
don't even know any tool to get stuff
i mean if you teach me i might as well tune in
also what's the thing that likes makes the box a box with a number
instead of a empty one
firefox, and also you need to zoom in a bit
oh
what browser are you using?
yeah was using chrome for ic in the past but then eventually it got laggy and had so many issues i switched to firefox
don't have issues
i have like a 1000 dollar laptop lol
it's overkill for ic
somehow I can't even make it work with ic helper with 4 elements on chrome anymore
ic helper doesn't load
heh.
look at those god awful specs.
i actually have a pretty dark story on getting this laptop
and it's kinda funny
i got it from my dead grandmas will
my grandpa gave a thousand dollars from her will
F386 F3A9 F3B4 F3BA
is any of these on ic
i want to do stuff
i want to be like you too
two
i want to be the third nerd
how the fuck am i meant to copy an unasigned character
how do you get f385
ok
it;s the private use area sheet btw
https://docs.google.com/spreadsheets/d/1WqRD3GT5GG-6z0mvu_afGjEH6C8WsYlaRBhOkzmW1WQ/edit?gid=0#gid=0
thank you
leaving these for riation
f369
barely any are
dude how am i meant to get those
can someone. heh. share a kickstart savefile.
heh. please.
i don't have like any of those
any
F405
the recipes are in the sheet, but yeah if you've done aboslutely no unicode before, you're gonna struggle, to say the least
the tools mostly should be in ib
not really any that i know of
f36b
^^^
useful links at the bottom
convert character to it's unicode value
if you copy the recipe and see multiple numbers, like 0020, it's a space
0020 is space so ignore those
there's well enough
you have ~900k (unassigned) char that still not obtained so
ok
well almost 600k of them we still have no way of getting
ok
oh my god my mouse sucks so much
it does not recognise fast clicks or holds AT ALL
i fucking hate this
f371
i want to get one of these
riation how is pua incrementing for you
why are you stealing them . i want to contribute in some way
would you say it's okay or bad
seems comparable to hangul ngl
can try any of those ig? (dont know if this zone will increment well tho), its a zone with a lot of hole
how do i insert a line break