frank canyon
Very small suggestion this time, but yk the “zone copier” block that copies a specific area? It is honestly useless. It has a volume of 12 blocks. (3x2x2) so you can copy 12 1x1’s. that is nothing. more than 3/4’s of the blocks can’t even fit in it by themselves. and you can’t stack them up on each other. and why is the clear button there? it’s 12 blocks, it is faster to remove them by hand than to use the button.
i think you get where i’m going with this. add another part to the block, (make it go from 2x1x1, to 2x1x3.)
-# (or 3x1x3)
this extra area will have 6 buttons, divided into 3 parts. first will be X, which controls the length of the area being copied. the next one controls Y, which is the height. Finally, as you probably guessed, the last one will control Z, the width.
This would probably be hard to program or be a bit laggy. which is why i think the limit to how big it can get is 16x16x16. I say this exact volume because the longest wooden block is 16x1x2, so you would be able to fit a bunch of these in this area.
PLEASE add this, builders will most want to buy this item if it has a big range. i still haven’t even bought it because i saw how small it was. (and put it on the right of the normal one in the techweb, or as far as it goes in that area.)
warm fossil