The theater update involves many different things that helps preform a show
Dmx board-the control panel for all music blocks. It is a 1x1x4 block with a 1x1x1 part of it having 2 dials. One to make blocks face side to side, and another to make blocks face up and down. Another 1x1x1 part is 4 dials which is rgb. Each dial represents a color, and by adjusting it changes the color that the block is producing, and 1 is a dimmer to choose how bright a block is. Another 1x1x1 part is a cue list where you can hook different blocks to different cues. The last 1x1x1 part is 8 buttons one is to go through the cue list, the next is a button to go the the previous cue. The 3rd is a reset button to skip to cue 1. The 4th is to edit the cue you are on. The 5th and 6th are to select the time it takes to move in between each cue (fade time) if there are lights that face is a certain area, and move to a different area, if will move to its next position in the same time it is set to. The last ones are to select the block you are controlling. When you are moving through the cue list you can see the blocks connected to that cue
Notes-blocks like the smoke cannons, party cannons etc can be put on a cue but can’t be positioned, and are activated normally once the cue starts.
This is a wip and more posts will release in comments (bc of max lines)
When blocks can’t be positioned the dials will be a deep red to show it is diabled
The rgb has displayed above each showing how much each value is (0-9)
Photos coming VERY soon