What settings do you use in UVR 5 to remove extraneous sounds? (Ultimate Vocal Remover)

[fallow sail]

What settings do you use in UVR 5? I didn’t really understand it, so I only showed it on video, or experimented quite a bit. In general, tell those who worked in UVR 5 what settings can be set to remove all extraneous sounds from the voice such as creaks, blows and other sound effects. (I have never found complete, NON-BASIC guides on them). I need to leave only the voice in the audio to create an RVC (voice model), perhaps there are some errors in the text or inaccuracy since I am writing this through Google translator.

[leaden geyser]

It doesn't depend so much on the configurations, but on the UVR model you use. Depending on what you need to remove, you use one model or another.

This could be useful

https://aihubdocs.github.io/en/vocal-isolation--datasets/uvr5--mvsep/

[fallow sail]

Here is the audio file of the character's voice: https://drive.google.com/file/d/1pqQtdMSlThT_qUJG4fw3RASUOGYz5sng/view?usp=sharing The only thing left is what I couldn’t remove.

[leaden geyser]

To remove that try MDX23C and then UVR-BVE-4B_SN-44100-1 (Back vocals model)

Both models are in MVSEP

[fallow sail]

USR-BIN-4B_SN-44100-1 (Back vocals model) is not available on MVSEP.

[fallow sail]

These are the settings I applied to the audio https://mvsep.com/home?sep_type=25&add_opt1=7 but it didn't help

[dusky heart]

Ayo? @fallow sail level 3 !!!

[fallow sail]

The link doesn't work so here's a screenshot

[gusty echo]

your only go to models are Melband Roformer and Mvsep Demucs4HT DNR, these are the only models that works best with ambience, sfx, and bleed removals

[fallow sail]

Didn't help, can you try to do something with the file? https://drive.google.com/file/d/1pqQtdMSlThT_qUJG4fw3RASUOGYz5sng/view?usp=sharing