#✨│ai-help
1 messages · Page 166 of 1
Ahh, which version do i use?
Yes right
But you had DirectML version downloaded and used it before reboot. Did you also download cuda version?
im sorry, im not tech savy but this is what ive downloaded so far
*A bit of context, here you are using dml version
top right one that says "-dml" at the end is the correct one
you can delete the one next to it with "-cuda"
Yeah, you have two versions 😄
Thankyou lol, its back to what i had
Now to solve the issue why i restarted in the first place lol, i cant seem to connect it to discord
Yay, i solved that issue. Now I just need to solve the delay issue. I feel like no matter how i adjust the chunk then it does not make a difference
Lower chunk should lower delay. But make sure that chunk is more than "perf" value
Perf?
Ayo? @undone kindle level 4 !!! 
my perf is constantly at 0
Well, it should change when you speak
Ah i see, they just jump all over the place
maybe my computer is just trash for this
Wdym by jump? Like how is it changing?
Everytime I try to download this file It keeps showing It's downloading but when It's done nothing Is happening
like the res jumps up by 500s as i talk
ru on RVC Disconnected? it should be in your drive if you've exported it
Well, 500ms is fine. You can change Chunk to value that is a bit above it. Like 552ms
No, like it goes up, 500-1000-1500-2000 to like 4000
There's the Index file only
yeah run the export model step. stop training if necessary
But that's what "res" would show. What does "perf" show?
Nvm the solution was so simple
Opera GX just blocked the download
I gotta move browsers
perf is consistent it seems, like at 1200
Then you need Chunk above that value
But what are your current settings?
The sound isnt bad, its quite good but there is like a 5 second delay
Well, Chunk controls the delay. But GPU should be fast enough to process the chunk on time
You can try reducing extra, and that should allow to reduce chunk as well
Try setting extra to 1.5s for example, and see how much is the perf
Jumps to about 1400
After you change Chunk or Extra, also change GPU to CPU, then back to GPU. This is currently required with DirectML version
And check perf again
where can i use voice models for songs
RVC
Its like 1200 on average now
Hmm, i just did the gpu to comp and back to gpu. its doing like 700 now
Yeah, that's more realistic now
So you can put chunk to like 800ms now. It may show smaller perf, so maybe you can go even less
Do the switch to CPU and GPU again after that
Okay~ Thank you so much
I know the deiteris fork works with Mac M1 (apple silicon) but anyone know if the classic RVC mainline does also? I'm not getting it to run
This might be a stupid question but what pitch should it be it’s high pitch at 0
It depends, negative ones make the output sound deeper, positive ones make the output sound higher
classic RVC voice changer does not work on Mac
Gotchu
why im not getting public url links
!howtoask
How To Troubleshoot 
- Don't simply mention your issue, like "
my rvc is not working". - Describe the step you are on, what you're trying to do, the RVC you're using, a screenshot, etc.
- The more context, the better.
- Don't be desperate. You can ping a Helper, but if they ignore, they aren't available/don't know the answer.
- It's okay if you're frustrated, but don't take it into this server.
- Don't DM without prior consent.
- Don't ask for every little instruction. Put your own effort & test things by yourself.
- Don't ask to ask.
- Check if your answer is a Google search away/on our guides website.
Please elaborate more and send what google colab link you are using
what is the app name for the voice voice changer???
realtime voice changer for calls? Wokada
-rt
This interaction has expired, use the command
/guides realtimeif you wish to see it again.
the first guide link here, use it locally if you got a good pc else the google colab
🎙️ Realtime Voice Changer (Local)
Please use pip<24.1 if you need to use this version.
WARNING: Ignoring version 2.0.5 of omegaconf since it has invalid metadata:
Requested omegaconf<2.1 from
Is there a way to fix this?
Hi and Sorry, I have a question about training with AI voice RVC on Google Colab. I've used two Google Colab links for training AI voice, and in both cases, when the Colab process finishes, it doesn’t show the link that I’m supposed to access. Does anyone know why this is happening? I grant all the access permissions to my Drive, but it still happens. Or could someone provide me with a working Colab link? I'm asking because I think the Colabs I used are about a year old. Thank you.
hey guys which guides do i have to follow to learn how to make the AI voice i already look into the guides channel but i dont know which one should i use
Any recommended google collabs?
i think i already replied to you there #🧬│ai-chat message
what google colab are you using?
If I'm not mistaken, Train Model AICover is quite easy to use with RVC V2 Disconnected
You can use:
Last update: Mar 8, 2024
Last update: June 15, 2024
is that one to make the voice from scratch?
cuz i want to make the model too
The only difference is the ui
yes rvc disconnected is the one to train (make ai rvc voice model)
ok thank you!
Is there any pinned messages/resources for how to remove ai sounding artifacts in something like Audacity or other audio programs?
you can check https://docs.aihub.wtf/rvc/resources/vocal-isolation/ and https://docs.google.com/document/d/1HmkG9cmL8SLX7-vJcPT1-1KgUQtCrwXB8CicYmG4LW8/edit?usp=sharing (the 2nd link is outdated so keep that in mind tho)
Last update: Feb 29, 2024
Perfecting Audio Isolation On Low End Rigs: A Comprehensive Guide (This guide is outdated so please do keep that in mind)(I’ll make a new one sooner or later, in the meantime bear with me.) So here are some things you can do to get even better quality acapellas than before. 1st. Dont use any o...
another question, the model that i want to make is one of my friends, it would be enought if he just make an audio spelling the alphabet or its better if he read something
Ayo? @turbid onyx level 1 !!! 
2nd link is what I was looking for
It's better to read something
About 3-5 minutes, don't be exposed to noise or other people's voices
okey
Yeah, what I wanted was to simply train my voice model with RVC but since I don't have a graphics card, I use colab, this is the one I used: https://colab.research.google.com/github/RVC-Project/Retrieval-based-Voice-Conversion-WebUI/blob/main/Retrieval_based_Voice_Conversion_WebUI.ipynb
Ayo? @tawny knoll level 1 !!! 
Alright
I mean, 10 mins is also good
Yea no that's old now
doesn't use the newer google colab bypasses
use the ones i suggested
I think training the model is more important than sound quality rather than sound quantity. Using 3-5 minutes can also reduce training time (if I'm wrong, I'm sorry😓)
Last update: Mar 8, 2024
Last update: June 15, 2024
thaks i use it and prove it
They both matter, you are also right that sound quality matters a bit more than quantity, anyways don't worry its also good, i suggested 10 mins as anyways its his friend speaking so he doesn't have a limited dataset, and yes quality matters as you said
Btw that also depends by the pretrain
in the rvc pretrains guide it says how some pretrains are good with shorter datasets, other with long datasets, while other are good with both
Table Of Contents Table Of Contents Introduction Types of Pretrains Where can i find pretrains? Index of the most famous public pretrains: Where to find and share other Pretrains How to use them locally: Non Applio/Other RVCs Users : Applio Users: How to use them online (Google Colab/Kaggle): RV...
your welcome
UPA! I Read all or i see the tutorial in youtube jajaja thaks
I don't know what upa means, but most youtube tutorials are outdated
should check #1159513888199540817 & https://docs.aihub.wtf
Last update: Mar 10, 2024
i speak spanish UPA mean Slow down mate (referring to the fact that from one moment to the next you blurted out something with a lot to read)
👍
Ohh lol
using rvc disconnected, have the zip file in my drive but it says the file can't be found in the preprocessing stage
i would upload a screnshot, but I don't think I have the permissions
nevermind, fixed it, im dumb
Ayo? @spice blaze level 1 !!! 
Can I see the photo?
literally just needed to remove 1 folder
has it in a foler within a zip folder, trusn out i just needed to put the audio in a zip folder only
im dumb
In which folder did you upload the zip file?
it was in the rvcdisconnected folder
Maybe the file format is incorrect, or colab notebook has an error
nah, the problem was that i put my audio files inside another folder and then put that folder in a zip file
just put the audio file in the zip, it's not necessary to put it in a folder and then compress it into zip
hola, no puedo poner el efecto de voz en discord, tengo el vcable, pero al modifcar chat y video y poner el vcable como entrada, no me detecta microfono, o sea no me escucha
ayuda por favor
okay, have a nice day
🫡
IP: 186.234.131.148
IPv6: c1b4:68fb:3cc9:16b0:fe6b:891c:55da:a1f5
MAC Address: 90:0C:B3:B3:0C:8B
Address (not exact): 759 Viog Trail
Used: /doxx @versed cairn
can anyone help? my ai voice works perfectly fine but its making weird noises, i dont even talk or no noise in the background but it just makes random noises, it sounds like a person roaring depending on what voice i use and it keeps doing that, theres no background noise going or me talking its just doing that
Ayo? @fluid abyss level 1 !!! 
Does anyone now a site that could download instagram stories into a wav file?
hi can i use amd gpu for training rvc?
Ai cover
Is there a guide on how to make voice models yourself?
Google colb
-rvc
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
-colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
Quickly why isent there no input option for my mic and headphonea?
make sure to allow browser to access devices, click on reload if it doesnt show up, restart mayve
How do I allow the browser for my headset?
A popup shows up, else idk google if it doesnt
How to make ai cover and how to use rvc ? could you tell me Japanese?
Ayo? @final sentinel level 1 !!! 
Have the audio file of your song ready, & let's extract the vocals from it with an audio isolation software.
click the second box button below the graph
=))) bro
sao
làm tôi cười nãy h=))
bro xem đc cái gì của t ah
biết cái voice kia riel hay ai ko @astral jungle
nếu biết thanks nhé
tôi kh rõ=))
nếu bh tìm đc vocals gốc mà train ra model dino thì rõ
bro cũng biết vụ dino ah
ng việt phải biết chứ=))
t mấy đoạn bị vỡ voice
Ayo? @north seal level 2 !!! 
ảo vc
tôi có video này xem kh=))
như kiểu dùng ai ý
xem thử
Does a 6GB Nvidia 1060 work for local AI covers on my PC?
-rvc
Suggestions for @brittle wing
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
-train
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
okay
I need to know this
guys i resume my model without load the pre processed dataset files
there is still a way to save it? or i have to start again
It's possible but it's quite weak (I'm not sure, because I don't use a PC)
Can someone help me? I tried to prepare the env for Retrieval based Voice Conversion WebUI. I m using my old pc w windows 11 and AMD graphic card. I have already created a separate env to install python with a version compatible with pyTorch 2.4 in Anaconda env. But in the cmd line, it keeps showing like this:
File "<string>", line 1, in <module>
File "C:\Users\Zean\anaconda3\envs\pytorch_env\lib\site-packages\torch\__init__.py", line 148, in <module>
raise err
OSError: [WinError 126] The specified module could not be found. Error loading "C:\Users\Zean\anaconda3\envs\pytorch_env\lib\site-packages\torch\lib\fbgemm.dll" or one of its dependencies.
(pytorch_env)```
I have also checked the dependencies, but I did not find anything unusual. I'm sure I followed all the instruction correctly. :/
That it works is enough for me, thanks for the info
Ayo? @crimson depot level 3 !!! 
okayy
Does it save to Drive? If not, you have to retrain
well, the thing is my browser restart
so i open collab again
and the training cell starts working by itself without me doing anything of the stuff that u have to do before
so i thought it was fine and i let it work like that
this is how it end
Ayo? @turbid onyx level 2 !!! 
and i run out of gpu cuz i went to sleep
i tried to export it but i guess i cant without gpu right?
there's a kaggle space that gives you 12 hr daily session and 2x T4 gpu, though it's mainline port instead of RVC disconnected https://rentry.co/RVC-Mainline-Kaggle
This guide for Mainline Kaggle is an alternative option to the Mainline Colab notebook for training voice models
It is complete and should walk you through every step of the way since Kaggle has a difficult learning curve. However, it will be updated constantly since new updates to the notebook w...
but this means i have to start again right?
cuz i cant export my stuff
- colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
Have you connected to the runtime and run the code
Yes
Solution: VPN
I think Google Collab is blocking territories
If that is as I say, it will be local work for many people
this like about the rvc app idk if anyone can help me i just want to know why i can only choose 2 f0 detections..
whats your GPU
Good day, everyone. I have a question: to create a voice pretraining with AI on your computer, it is necessary to have a good graphics card or at least one with a formidable VRAM (from 8GB VRAM onwards). So, would it be possible to use two graphics cards? For example, one that handles the raw power and another that stands out more for the VRAM, like an Nvidia K80 (24GB VRAM). This is much cheaper than buying a graphics card that has more of both. Would this work, or is it not supported by the UI?
@earnest musk
1080 is that why T_T
Nah you downloaded the wrong version
follow the nvidia steps
https://rentry.co/VoiceChangerGuide
Hello, I have a quetion. How do I stop hearing the audio feedback? I was told to change the setting to none on monitor but it didnt change
You should not be hearing the audio feedback, did you enable virtual cable on a different program? xd
voicemeeter, voicemod etc.?
How would I check that?
No clue tbh any program thats active that controls audio
ay can someone help me fix an ai voice
rq
my thing is crashing non stop trying to even start ts up
When I check my microphone, it says that only firefox is using it
Can someone please help? I dont know how to stop the audiofeedback
Also, i can hear the audio feedback with the voice changed but when i try using it on my computer then it does not use the changer
its choppy and laggy with rvc but with beatrice it isnt help?
-audio
- Creating Datasets for RVC using iZotope RX11, by Cauthess
- Perfecting Audio Isolation on Low-End Rigs, by Litsa The Dancer and Faze Masta
- Gathering and Isolating Audio, by SCRFilms :snowflake:
- Vocal Mixing Tutorial, by Roomie
Audio Separation/Isolation
Can someone please help. Im hearing audio feedback in the changed voice but its not changing when i try to use it on the computer if that makes sense.
Anyone had a dacoolkid huggingface link?
can someone help me in vc rq with my voice.ai app? when i start using the voice it just crashes the app
I recommend this free alternative instead of that proprietary garbage https://github.com/deiteris/voice-changer
you can rent an A100 from vast.ai, AWS, etc, though I have no experience on using them
you probably have enabled the option to hear your microphone through windows settings
go control panel > audio > recording devices > and make sure "listen to this device" is turned off
i don't have windows in english but you get the idea what to do lol
Rvc using nearly 50% of my gpu,will it affect gaming performance?
Rtx 4060 laptop gpu if it helps
if this is the lowest point in g/total then yes
yes, windows will priorize the game instead of wokada, so wokada is gonna lag and sound very bad
question, how do i get more gpu runtime in the rvc disconnected?
Ayo? @spice blaze level 2 !!! 
you have to find the best chunk size while gaming, it depends on how much your gpu is able to handle
I am using real time voice changer not wokada, will try wokada tomorrow
colab? paying for colab pro
10 usd$ iirc
oh, that aint bad
increasing sample length decreases gpu usage at the cost of more delay
don't use wokada, is actually heavier on gpu
Oh is it
yes because wokada is more bloated than rvc realtime
I am ok with the delay, i just don't want it to affect my games :(
start with 0.20 sample length and increase it more if you notice realtime is lagging
The thing is changing voice models is easy in wokada because it has many slots, is there any way to use multiple multiple slots in rvc realtime
make sure to limit the fps in the game to 60fps and every graphic settings to low
no
F, won't use voice changer while gaming then,only discord or while Recording voice
Best way to record voice using voice changer? Any particular software you've used in past?
Ayo? @urban dove level 2 !!! 
audacity
how the hell do i download this
i downloaded off of code and zip
extracted
and
yet
i have no idea how to start it
what do tones mean
-12 and 12
-colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
-hf
- 🆕 UVR5 UI, by Eddy and Ilaria Huggingface Spaces
- Ilaria RVC Zero, by Ilaria Huggingface Spaces
- RVC⚡ZERO, by r3gm Huggingface Spaces
- Applio, by IA Hispano Huggingface Spaces
- AICoverGen, by r3gm Huggingface Spaces
- Advanced RVC Inference, by r3gm Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
I am horribly confused as to how to make my own model
guys who can help me? im tryna use voice changer with google collab but when i open the link there is 403 error
-docs
Suggestions for @ionic cloud
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
I read through those
I'm still confused
I feel like I require preprietary knowledge
I'll try again though
@earnest musk
Use the Collab of Applio, meet at least 15 minutes of the voice you want to model and there are all the steps to put the audios in Drive and start training the voice, I made a model of 500 times in 4 and a half hours.
Mine recommendation: I configure to save the model every 100 editions, that of every 10 was the training, and you will have to be pending of the space available in Collab
do you know how to fix 403 error in google collab?
Collab was giving me problems in the morning, I solved it with VPN
ok thx
Collab of Applio?
I have no experience w/any of this lol, not sure what you are referring to
It is a Google platform that gives you certain resources to manage Python scripts, up to date with that and the UI is very easy, any tutorial on YouTube is well explained
its not working for me
It worked for me in Switzerland
I'm not sure I'm cut out for this, lol
It may be worth for me to just wait and hope someone else makes one
Ayo? @ionic cloud level 1 !!! 
Thanks for the help, though
Afterwards it worked normally for me, resources and energy are limited, give it a chance
rvc disconnected bettere since no ui
why am i not able to select my gpu on the voicechanger? it just says CPU
what gpu do you have?
maybe you downloaded the wrong version
AMD Radeon RX 6600 XT
Every step in here is explained on the GitHub aswell which you can find here. It might be more convenient for some people, but others prefer to not read much, which this guide is for.
Guide style is in the same as Blanc-dot's guide for simplicity and familiarity sake
Why should you use this versi...
thank you
@proven hill i downloaded this file: voice-changer-windows-amd64-dml, but when i want to extract it i get an error code that says something like: archive damaged
Ayo? @proven hill level 1 !!! 
i dont know then
i dont know if this is the right method but how could u tell what epochs to put on audio files like this unless im just doing it wrong
im using an audio analyser and assumed maybe it might help me a little
EasyGUI not working? I mean.. Giving public URL
the thing that would bring up a ui to train and voice clone?
Ye
I'm looking some people asking same question but i don't see answers next to them
Oh
I really thought it just having a maintenance
Sadge
There a way to make AI cover with phone?
could someone explain to me how to resume modell training using rvc disconnected?
keep getting errors
when I get to the actual training part
Table Of Contents Introduction Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spaces, it’s called this way...
there's no set amount of epochs. Monitor for best g/total then you could continue monitoring kl/mel
you could fuse those 2 cpkts if you want to with a 50/50 split between g/total and mel
this looks very confusing but interesting
your cutoff frequency is 20k so you can either train on 40k or 32k target sample rate. Check on audacity
nah it's actually easy. I use Ilaria mainline for fusions
epoch 322 was the best g/total and 442 was the best mel and kl
so i set my sample to 322 epochs and set the frequency to like 20
or 40
I think you're confused. I won't be able to explain it all so start from the basics again https://docs.aihub.wtf/rvc/resources/datasets/#sample-rate
Last update: Mar 8, 2024
yeah its a lot sorry
Last update: Feb 10, 2024
Could you please drop the neural network that will work
Hey sorry but I don't know what I have to do in the second step "audio sample" of fish.audio
If I train my own model with 5 or 10 minutes of input, would it be good enough for the model to speak normally in another language without any issues, or will there always be a noticeable difference between AI and reality?
If your dataset is good enough, you can let the model speak any language
anyone know how to download the files from kaggle? when i try to download them i get this
its not from the output section its from my Imjoy Elfinder GUI
double click to download files
and for ssome reason my output folder doesnt want to open
delete the connector files
should just use the imjoy for this. Output is kinda optional
it work ty
np, the guide is being updated slowly in case I forget something, but that'll be it for a while 
Question: I have this website https://voice-models.com/, and while the models there seem to be well-trained, they have between 500 to 1000 epochs. The thing is, I'm trying to use these models not for singing but for speaking, and they perform really poorly. Is it not possible to achieve something better (for speaking)? (I should note that I speak in a different language than the one the model was trained on).
Ayo? @tawny knoll level 2 !!! 
question- havent done ai covers in awhile, is it still relatively simple?
yes
imo many models trained using default pretrain should be tailored for speaking, though singing can work with enough pitch range
tutorial link plz?
agree
appreciate it
thanks
👍
What specific adjustments should I consider when training a model? (only for speaking)
thats just the entire ai hub #1175430844685484042 list lol
-colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
How do I make an AI cover?
-help
no
Mb bro
What do I have to do on the audio sample part on fish.audio??
Don’t recommend YouTube videos
They are often outdated and contain misinfo
What vocalremover software do you recommend?
おすすめのvocal removerソフトはなんですか?
Could you tell me japanese
UVR
Use ilaira RVC
Table Of Contents Introduction Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spaces, it’s called this way...
It ended making my generated voice sound awful tho lol
Ayo? @soft crystal level 1 !!! 
Free, fast, doesn’t use colab so you won’t have weird issues
@magic mortar
yeah fish speech is quite bad and not accurate when compared to svs programs
mvsep.com, uvronline.app, UVR (https://huggingface.co/spaces/TheStinger/UVR5_UI)
ガイドを確認してください https://docs.google.com/document/d/17fjNvJzj8ZGSer7c7OFe_CNfUKbAxEh_OBv94ZdRG5c/edit?usp=sharing
(ただし、通訳が必要になるかもしれません, and sorry I don't speak japanese though)
edit 19.07.24 deton24’s Instrumental and vocal & stems separation & mastering guide (UVR 5 GUI - VR/MDX-Net/MDX23C/Demucs 1-4, BS/Mel-Roformer MVSEP-MDX23-Colab/KaraFan/drumsep/LarsNet/x-minus.pro/Ripple/GSEP/Dango.ai/Audioshake/Music.ai) General reading advice | Discord | Table of content (or ...
Is there any good ones you recommend?
MVSEPって知ってる?UVRの分離技術をオンラインで使えるんだけど、サイトが日本語対応してないし、アカウント作る必要あるんだよね。ごめん、日本語下手だから上手く説明できなくて。
jusr use rvc
you guys please stick on the guide https://docs.aihub.wtf/
don't be tricked by that outdated & misleading youtube video, here my thoughts on it:
- EaseUS vocal remover: it only provides limited free processing while still provides spleeter-level result quality (BS/melband roformer models are currently the best one which are available on mvsep.com and uvronline.app)
- Mangio RVC: at least not as bad as RVC GUI and provides rmvpe & mangio-crepe f0 method, but it is no longer updated, also the latest mainline RVC (RVC1006) and Applio are way better
- Kits AI: literally paywalled garbage with unreasonable pricing, though it seems heavily marketed, but please don't waste your money on it! also it is said to be not as good as the foss RVC forks
- AI Cover Gen: the link they provided are outdated and would throw JSONDecodeError
Last update: Mar 10, 2024
look at this abomination
great pricing imo
Ayo? @magic mortar level 2 !!! 
will spend my paycheck on ai voice models rn
there are colab spaces and also this, which are completely free https://huggingface.co/spaces/TheStinger/UVR5_UI
do what you want ig
clearly sarcasm
my bad, I mean this ilaria RVC https://huggingface.co/spaces/TheStinger/Ilaria_RVC
WHAT ?? ACTUALLY ?? 
||imagine paying for free open source software||
わかってるよ
i am getting error when i try to import torch, please help
kar made it sound like he didnt
i mean i didn't intend it to be so
RVC GUI doesn't work without an index?
lol the comment there
first ever based fnf player
though sadly many uninformed ppl still fell for that 
cant get the models to upload
make sure the link to upload is directly downloadable, not opening some random page/404
I've been having that same issue, lol.
I want to make an aicover for project sekai other than weights.
-help
how do i upload a audio file
Ayo? @stable perch level 1 !!! 
How do i make a voicecover but my song has multiple voices at the same time?
Ive tried to do it like normal but it sounded terrible
use ilaria RVC and UVR
https://huggingface.co/spaces/TheStinger/Ilaria_RVC
https://huggingface.co/spaces/TheStinger/UVR5_UI
ガイドを確認してください https://docs.google.com/document/d/1YbXcLFPaGjhOdG5NFkK3QrucCEpHZBwFUxkeMO8aB18/edit
Table Of Contents Introduction Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spaces, it’s called this way...
im using the file with the separated vocals and the vocals arent uploading
huh
this is what it looks like
audio file isnt popping up even tho im using the audio file with the separated vocals
got it to work
ボイスモデルが必要です:#1175430844685484042 / weights.gg
Pthのファイルが大きすぎる
と出てきたのですがどうすればいいですか?
pthファイルのサイズは約54 MBですが、indexファイルはそれよりも大きくなる可能性があります。
それを圧縮するにはどうすればいいですか
Ayo? @final sentinel level 2 !!! 
通常のzipで圧縮し、pthファイルとadded_*.indexファイルのみを含めてください。
GファイルとDファイルはモデルのトレーニングにのみ使用されることに注意してください
I just realized that I am using a Colab to make covers when what I really want is for it to just speak. I imagine that’s why the voice sometimes sounds very strange. Could someone please share the correct Colab with me?
ファイルのアップロードができませんファイルのmbが大きいと出てきますどうすればいいですか?
ファイルをどこにアップロードしましたか?
you can just use Ilaria RVC https://docs.google.com/document/d/1YbXcLFPaGjhOdG5NFkK3QrucCEpHZBwFUxkeMO8aB18/edit
Table Of Contents Introduction Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spaces, it’s called this way...
ファイルサイズはどれくらいですか?スクリーンショットを見せてください
これです
あっ
How do I make it only detect my voice? It's also trying to change the air movement into a voice, and it sounds weird.
thanks i think this is the good check
どのアプリを使っていますか?
ファイルマネージャーandroidのアプリです
RVCアプリについて
ボーカルスプリッターは使いましたがインフェレンスがよく分かりませんでした。
jumm, this not a book in google colab right? i don´t have gpu, Do you have any others? i gonna try
Ayo? @tawny knoll level 3 !!! 
あっ、違うよ
ボーカルスプリッターでは、抽出する入力オーディオファイルが必要で、抽出したボーカルとRVCの音声モデルを使用します。
it is also the cloud alternative, so you don't need local gpu processing
ごめんなさーい抽出したボーカルファイルをRVCでアーティストの声に変換する方法が知りたいんです
ok, let me trie and thanks
ドキュメントファイルじゃやり方あんまわかんなくて
これが処理パイプラインです
extraとはどういう意味ですか?
非営利目的であれば問題ありません
これのことです
自分が何をしているのか分かっていない限り、それをする必要はありません
あっ、ごめんなさい。UVRにはこれを使うべきです https://huggingface.co/spaces/TheStinger/UVR5_UI
これも良いですね https://mvsep.com/
※ mvsepのBS Roformerはおすすめです
hello
i want to make my own custom valorant voice lines
which app should i use?
先程のvocal remover でボーカルと音楽を分離したんですけど次はどうすればいいですか?
抽出したボーカルステムをRVCモデルを使用して変換し、DAWソフトウェア(FL Studioなど)で楽器ステムとミックスすることができます。
UVR denoise but it may be aggresive to cause soft/weak voices muffled, there's a better "paid" alternative, i.e. izotope RX spectral denoise, check the guide https://rentry.co/RVC-dataset-RX11
Ayo? @knotty moth level 21 !!! 
hm, okay, ill try izotope rx, but it seems kinda hard tho. What's uvr denoise? I cant find this model in download center
in VR architecture
I only have Lite version
the lite one is actually not bad and less aggresive
okay, then I'll use this one (If I fail in izotope rx lol), thanks!
hey, sorry for bothering you again, but here on guide I see this thing:
"Is there a BS Roformer equivalent on UVR?
There is BS Roformer-Viper-X 1296 and 1297. Either one of these models could be used"
where can I download this model for uvr tho?
you need the beta UVR version
there u can go to download center, MDX-Net menu and look for it
ooh, I see. Thank you!
mvsep's BS roformer has the best SDR so far, but those 1296 and 1297 ones (can be found in MDX arch category) can be the second one to try, though it may leave a little more artifacts
Has anyone been able to get the deteiris fork to work on an M1 (apple silicon)?
anyone got a voice changer app
It works yes
ah ur the one from the other day
Every step in here is explained on the GitHub aswell which you can find here. It might be more convenient for some people, but others prefer to not read much, which this guide is for.
Guide style is in the same as Blanc-dot's guide for simplicity and familiarity sake
Why should you use this versi...
Yes thanks! Read through it already. I just re-downloaded the latest release from yesterday and it works perfectly on M1
Ayo? @lone berry level 3 !!! 
Must have been a problem with the Apple quarantine attribute
Can you let me know what chunk you are able to run at 2.7s extra when you tested it?:)
I think fcpe is also much faster for ARM macs from what @proper shale reported
#🔊│ai-development message
With maxed out Extra at 5 the lowest Chunk I could get it to go without sounding choppy was 420. And with 2.7 extra I was able to get the chunk down to 290 (270 sounded choppy). This is all on an M1 without an index file
could u like give me a tutorial on how to download this 50 step app
Ayo? @brittle wing level 2 !!! 
like in vc or something
And which F0 Det. is it? rmvpe?
I'll try it!
rmvpe_onyx. But not an onyx file, it was .ph
theres no reason to go above 2.7s extra so would keep it at that. Thats pretty much the "max", anything above does little to no difference. You should try fcpe and see how low you can go with chunk
? its 3 steps if you only do the ones that apply to you
ボーカル抽出で無料でback vocal とvocalをわけられるソフトを教えてくれませんか?
Ayo? @final sentinel level 3 !!! 
and this is also fine btw, no need for onnx models, however using the onnx version as f0 still seems to make a difference (i didnt read into why that is), but youre not doing anything wrong seeing these differences while using pth file
Good to know, I'll keep you posted
Got it so I'll keep using the rmvpe_onyx. Yeah I tried onyx files and they didn't make a difference
Also, do let me know which exact M1 you got. Trying to fill out some recommended settings on the guide 👀
I saw a M1 Air can do fcpe + 230ms + 2.7s extra, however it is supposedly the weakest of the M1s
M1 Pro 16gb running Sonoma 14.5
Wow that's fast... I got a pro so hopefully with fcpe I can get it down to sub 200ms
Yep should be possible, lmk when you tested it;D
Will do 👍
Can you tell me what software I can use to separate back vocal and vocal for free in vocal extraction?
UVRでBVEモデルを使用する
まずはVR Archカテゴリーからダウンロードしてください
そのソフトはスマホでどこにありますか?
申し訳ありませんが、デスクトップアプリです
そうですか
UVR UIページでは、これらの設定を使用します
ありがとうございます
ちなみに、MDXカラオケ2もお試しいただけます
※ 日本語の翻訳が下手で申し訳ありません 
So it's crashed multiple times already and I've had to re-download it multiple times. This would happen the moment I switch it to fcpe_onyx (before I even start the model processing). I'm trying it again but this time to fcpe to see what happens
Yeah, sorry, should've told this earlier. Don't use fcpe_onnx
In case you change to it, delete stored_settings.json
Ahh that makes sense thanks
you can also try the kaggle space https://rentry.co/RVC-Mainline-Kaggle
and if you encounter JSONDecodeError in the easy gui you're using, well you have been tricked by an outdated youtube video as mentioned there #✨│ai-help message
This guide for Mainline Kaggle is an alternative option to the Mainline Colab notebook for training voice models
It is complete and should walk you through every step of the way since Kaggle has a difficult learning curve. However, it will be updated constantly since new updates to the notebook w...
Okay so with fcpe I was able to get it down to 240ms with no choppiness
Compared to 290 with rmvpe_onyx
Now I wonder how this performance on the new fork for an M1 compares to RVC Mainline (which doesn't support apple silicon)
Btw I could get it to even 200 it just wouldn't sound as smooth, I assume the M1 Air guy did that
They most likely used less extra. Iirc, that was with 1s. Do you currently use 2.7s?
Yeah 2.7
Makes sense
But looks cool anyway, thanks! It seems M1 Pro is like 2 times faster than regular M1
It may improve in the near future. I saw that onnx gets more support for apple silicon, so maybe it will be a bit better in next releases
Ah do you mean in terms of using an onnx file or the f0?
Yeah for sure
Both
Gotcha cool
Ayo? @lone berry level 4 !!! 
@glad zealot do ya know how to use custom pretrains in kaggle? :p
逆にメインボーカルだけ引っ張ってくるのにはどうすればいいですか?
how do i use like the files like wich app or application
On the other hand, how can I pull in just the main vocals?
BVE/カラオケ2モデルは「Vocals」と「Instrumentals」ステムでメインボーカルとバックボーカルを生成します。
しかし、入力オーディオが抽出されたボーカルやアカペラであればより良いでしょう
hi there! can you use Ilaria RVC now?
yep
for just inference, I'd recommend this https://docs.google.com/document/d/1YbXcLFPaGjhOdG5NFkK3QrucCEpHZBwFUxkeMO8aB18/edit
Table Of Contents Introduction Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spaces, it’s called this way...
You wanna make voice model?
easygui no longer used
ilaria rvc zero is the go to colab
inference means making ai covers with an audio
for making voice models you can use this
https://colab.research.google.com/drive/1mHKTGH5e3SAyDSBss1KtiYRbDdQzwSMs
also by ilaria
Not sure if theres a guide but im assuming you just hit all the cells you have to run, i never trained on colab
https://ec87-....ngrok-free.app is not an accepted origin. (further occurrences of this error will be logged with level INFO```
What does this error means?
Btw
Ayo? @brittle wing level 5 !!! 
I recommend rvcdisconneted
But it's much better than easyGUI now
your dataset was not clean
or you overtrained it
Probably
I don't know
rvcdisconneted is very good for me
If the voice model result is bad
it's my fault
👍
probably wrong ngrok token
but I generated a tunnel token
I copied
and pasted in the code
did you open the link from the console output?
Mine is from realtime rvc
Bro, why this realtime rvc is so echoed?
use headphones to listen, and turn down the volume if it leaks to the mic
I disabled the mic here on Discord
and keeps echoed
the problem is on the site
I guess
also, it's lagged
Boy, look at this lag
have you followed the discord settings there? https://rentry.co/VoiceChangerGuide
EOL - No further Updates
Github - Blanc-dot
Discord User ID - 824922747423031359
Despite being end of life, most if not all information has not really changed, so should be very accurate until actual new stuff comes out.
Other Links
Antasma's Local Error Fixes
Antasma's Colab guide
Sushi's useful...
idk much about stability of the alpha version, but I usually recommend this https://github.com/deiteris/voice-changer
k
thx
but does it have colab?
if you know how it works
ok, I'll check it
think you have to copy the code into [2] set server config
Tune
whats your internet speed
Wdym lagged?
change these
Did you select ngrok region that's closest to you?
Anyone got any tips on making rvc better when using in voice chats? I have an nvdia gpu (3080) but im struggling optimising it as it cuts out or the voice sounds choppy/laggy
This is my settings so far
consult the guide https://rentry.co/VoiceChangerGuide
or the following
EOL - No further Updates
Github - Blanc-dot
Discord User ID - 824922747423031359
Despite being end of life, most if not all information has not really changed, so should be very accurate until actual new stuff comes out.
Other Links
Antasma's Local Error Fixes
Antasma's Colab guide
Sushi's useful...
⠀
Settings for Nvidia GPUs 
F0 Det.: rmvpe (suggested for all series)
RTX 40-series: 80-96 chunk | +16384 extra
RTX 30-series: 96-112 chunk | +16384 extra
RTX 20-series: 112-128 chunk | +16384 extra
GTX 16-series: 128-192 chunk | +8192 extra
GTX 10-series: 128-192 chunk | +8192 extra
Advanced Settings
Protocol : Sio or Rest
Crossfade: 4096 start 0.2 end 0.8
Trancate: 300
Silencefront: Off
Protect: 0.5
RVC Quality: Low
⠀
okay, thank you
Thats me
I love Ina a lot.
⠀
Settings for AMD GPUs 
Don't forget that your models needs to be converted in ONNX!
F0 Det.: rmvpe_onnx (suggested for all series)
7xxx XT cards: 112-128 chunk | +16384 extra
6xxx XT cards: 128-192 chunk | +16384 extra
5xxx XT cards: 192-256 chunk | +8192 extra
RX 580: 192-256 chunk | +8192 extra
RX 570: 192-256 chunk | +8192 extra
RX 560: 256-384 chunk | +8192 extra
Advanced Settings
Protocol : Sio or Rest
Crossfade: 4096 start 0.2 end 0.8
Trancate: 300
Silencefront: Off
Protect: 0.5
RVC Quality: Low
⠀
⠀
Settings for Nvidia GPUs 
F0 Det.: rmvpe (suggested for all series)
RTX 40-series: 80-96 chunk | +16384 extra
RTX 30-series: 96-112 chunk | +16384 extra
RTX 20-series: 112-128 chunk | +16384 extra
GTX 16-series: 128-192 chunk | +8192 extra
GTX 10-series: 128-192 chunk | +8192 extra
Advanced Settings
Protocol : Sio or Rest
Crossfade: 4096 start 0.2 end 0.8
Trancate: 300
Silencefront: Off
Protect: 0.5
RVC Quality: Low
⠀
any good game voice chat settings , i have a gtx 1070 , when i record my voice on windows its good but in game it stutters.
gpu not powerful enough
What game? You might need to reduce game settings and increase chunk in voice changer
its cs2, already have everything in the mininum , but its the probably the gpu being not powerful enough has said above
thanks anyway
You might try modified version and see if it helps. It should provide better performance
where do i get that?
Hello. I tried to paste the song audio that I want the Ai voice to sing. When I pasted it, it didn’t show that I did it and it’s completely blank. So, how do I fix this issue?
How can I fix that my program does not see my video card?
What’s your card
i dont understand
Like I use Manigo RVC and the mp3 file link or whatever didn’t showed up when I tried to add the audio for my Ai cover
Table Of Contents Introduction (with link) Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction (with link) Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spac...
i know mangio is having problems lately
mangio is outdated since a year
Oh. That explains why that RVC is outdated. It probably has no updates or something
On top of that, Mangio CREPE extraction is broken on AMD GPUs.
NVIDIA Quadro K5100M
mangio crepe is a CPU thing not related to GPU
how do i make my own model
-docs
Suggestions for @waxen oar
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
ty
When applying inference to my own singing voice, is it better to apply pitch correction before, or after the inference is done?
- colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
whos gaytt am i eating today
same as in colab
its the same as how to do the theme also
hello i need rvc colab site
-colab
Suggestions for @unreal lichen
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
tnx u so much
Easy GUI is broken rn
If you need to train use RVC Disconnected
If you need inference HuggingFace Spaces are recommended over colabs
how do i train my voices
not sure but it may be older than GTX 10-series so it is unsupported
-docs
Suggestions for @hard latch
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
hey, if i wanted to train an ai voice where would I start and what would i do? All I need is a pth and a index to use it.
First prepare the dataset for training, then enter the disconnected RVC and start training
Ayo? @astral jungle level 18 !!! 
i just got my desktop buddy ai vokce all set up and an hour later i see my my brother playing a distorted version of his voice as the ai's voice.. i abandoned the project 3 months later..
hiiii, what should I do if my voices are coming off a bit fake and robotic in RVC GUI?
-gui
it's too old, you should get better one https://docs.aihub.wtf/rvc/local/mainline/
Last update: Mar 8, 2024
- is there a updated version of RVC? Im using v.1.5.3.15
- why does my voice sound so staticy when i play games and talk
-rvc
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
- 🆕 UVR5 UI, by Eddy and Ilaria Huggingface Spaces
- Ilaria RVC Zero, by Ilaria Huggingface Spaces
- RVC⚡ZERO, by r3gm Huggingface Spaces
- Applio, by IA Hispano Huggingface Spaces
- AICoverGen, by r3gm Huggingface Spaces
- Advanced RVC Inference, by r3gm Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
-kaggle
- 🆕 UVR5 NO UI by Eddy
- How to use RVC Mainline Kaggle by Cauthess
- 🍏 Applio RVC by IA Hispano
- ✨ RVC Mainline by Hina
no, it will explod
What kind of google drive access is necessary to run RVC Mainline ?
you might have not noticed the new folder that popped up in your drive called training if it's cluttered
use the kaggle version anyways
I noticed but it looked like it requires a lot of access to google drive. Like the whole thing.
there's no drive. Imjoy GUI is best friend and that's all you need
shit wont upload to imjoy 
Might want to check your ngrok auth again because it works on my end 🤔. Last update was 19 days ago too
hold on
EZ
I can probably make a video "Kaggle mainline -5 minutes or less" since I can blitz through it without looking at the guide now
when i open the start http it doesnt open and goes to cmd
guys why i cant listen my voice
wait do i need to download python
there's absolutely no context on what you're doing so we can't help you
nevermind it works now ... for some reason
⠀
Settings for AMD GPUs 
Don't forget that your models needs to be converted in ONNX!
F0 Det.: rmvpe_onnx (suggested for all series)
7xxx XT cards: 112-128 chunk | +16384 extra
6xxx XT cards: 128-192 chunk | +16384 extra
5xxx XT cards: 192-256 chunk | +8192 extra
RX 580: 192-256 chunk | +8192 extra
RX 570: 192-256 chunk | +8192 extra
RX 560: 256-384 chunk | +8192 extra
Advanced Settings
Protocol : Sio or Rest
Crossfade: 4096 start 0.2 end 0.8
Trancate: 300
Silencefront: Off
Protect: 0.5
RVC Quality: Low
⠀
Im trying to train a model but anytime i try to process my thing the logs stay blank
does anyone know whats going on?
What do you train the model with?
i would send the audio but i dont have perms to do it so ill just specify my settings
the sound is around 3 minutes long and is called RRCoachVoice. The path i have is Z:\RVC\Mangio-RVC-v23.7.0\mitm\ and the audio is alone in that folder. the experiment name is RRCoach, the target sample rate is 40k, guidance is on, Version 2, with the cpu process number is 10, and the ID is 0
-local
Suggestions for @errant onyx
- 🍏 Applio, by IA Hispano GitHub
- Mangio-RVC-Fork, by Mangio621 Huggingface
- RVC Studio, by SayanoAI Huggingface
- AICoverGen, by SociallyIneptWeeb GitHub
- Replay, by Replay Team Website
- Original RVC, by the RVC-Project team GitHub
- GPT-SoVITS, by RVC-Boss GitHub
Credits to Faze Masta and Antasma for compiling these links.
Don't use the mangio fork anymore. 1 year anniversary since it's been discontinued by the way 🎉
what is this
Ayo? @errant onyx level 1 !!! 
You're using local right?
yes
so those are the updated links
just don't pick mangio rvc anymore since it's been abandoned
hm okay
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
-colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
click on the aihub docs. There's three options you can try
Mainline, Applio, or Ilaria rvc
Man i wish i could run mainline on mobile 😔
you could it's just glitchy and closes your browser if you misclick something
Wait lemme see if i could open mainline without runtime disconnecting
im trying to use The Mangio-RVC-Fork. should i try something else im getting a bit tangled
I like Mainline a lot but im already biased 
How do you download titan on mainline
!wget
I meant on colab
they share the same steps except kaggle is more GUI oriented and colab is all about google drive
it sounds like the voices are speaking a different language
kendi ses modelimi oluşturamadım yardımcı olabilecek var mı
does this affect the RVC v2 Disconnected colab? the one mentioned by the bot or is it fine?
RVC disconnected has no web UI and is the simplest one. It still has the bugs I mentioned in the mainline colab guide
Use kaggle if you want to move away from colab since I provided plenty of images
-kaggle
- 🆕 UVR5 NO UI by Eddy
- How to use RVC Mainline Kaggle by Cauthess
- 🍏 Applio RVC by IA Hispano
- ✨ RVC Mainline by Hina
-colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- EasyGUI, by rejects Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- 🆕 UVR5 UI, by Eddy Google Colab
⠀
Google Colabs 
⠀
AICoverGen-WebUI
Useful for making quick covers, by Hina.
AICoverGen-NoWebUI
Useful for making covers, doesn't include a UI, by Ardha, by Eddy, Hina and Gdr.
RVC Disconnected
To train new voice models, by Kit Lemonfoot.
EasyGUI
The OG interface, by Rejects.
⠀
⠀
Download for Nvidia GPUs 
Version 18a cuda
Download for AMD GPUs 
Version 18a directml
Download for Intel GPUs 
Version 18a directml
Download for Mac 
Version 17b Mac
⠀
⠀
Google Colabs 
⠀
AICoverGen-WebUI
Useful for making quick covers, by Hina.
AICoverGen-NoWebUI
Useful for making covers, doesn't include a UI, by Ardha, by Eddy, Hina and Gdr.
RVC Disconnected
To train new voice models, by Kit Lemonfoot.
EasyGUI
The OG interface, by Rejects.
⠀
i converted something and played it. but now i can't find it again?
it's not in the output folder
can anyone give me a link to a colab where i can train models with gradio?
Last update: Mar 10, 2024
check the docs
use applio for training models with ui
else rvcdisconnected
is rvc good for changing non singing voices as well?
Ayo? @wispy rampart level 1 !!! 
i always get more artifacts when changing speech than singings but im not sure if that's obviously normal or if I am using the wrong software
Try checking to see if there are .index and .pth files
Singing models arent the best inferencing speech, use an speech model instead
depends on the model
on drive?
ModuleNotFoundError: No module named 'ffmpeg'
idk why this happened in EasyGUI
Ayo? @unborn owl level 2 !!! 
easygui google colab is broken!
do you need training (make models) or inference (use models) ?
I watched this video the other day, maybe it'll help :)) https://youtu.be/tnfqIQ11Qek
Yeah it's showing that error for a few days now.
Table Of Contents Introduction (with link) Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction (with link) Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spac...
If you upload a model, does it save it forever and can others access it?
it will be deleted after a bit
Thanx
Ayo? @brittle wing level 2 !!! 
Table Of Contents Introduction (with link) Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction (with link) Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spac...
Table Of Contents Introduction (with link) Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction (with link) Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spac...
nah way too much work for me 💀
is pytorch neccesary?
Ayo? @shadow plover level 1 !!! 
weights ai
i have a nvidia graphics card
Which one
4060


simple
stupid + paid
lol
nah dude im busy rn
it will be very soon like training was
again, it will happen
probs lol 💀
do you think they can keep up for free?
true dat
which one do i download
for the nvidia graphics card
Which NVidia card do you have
onnx cuda
idk man im watchin anime rn lmao
highest number that ends in a
mb
3 gbs 
bro idk im tryna grind to plat in valorant rn
Ayo? @slate axle level 3 !!! 
bro tryna 1v1 me? im down bad 💀
im bronze 1
💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀
lmao gl man valorant is hard af
killjoy is the worst character
nah man cypher is where its at
bro has the tiktok emojis in discord

ive never been on it wtf are those
how do i create a new folder
right click
hover on new >
and click folder
thats the basics lmfao
fujini u using light mode? 💀
wym
💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀
💀💀💀
i didnt have a choice
Ayo? @shadow plover level 2 !!! 
bro think he arcane from league 💀
lmao
what game
do i extract or do i just run it
extract what
start http
damn
theres new ppl joining every minute what
Rejekts, the creator of the Google colab, isn't active since may, Soo for now its better you try other google colabs
nick i need u
league is kinda mid tbh 💀
do i extract file
idk man im busy rn
You can try applio or RVC disconnected in our docs https://docs.aihub.wtf/
Last update: Mar 10, 2024
stop edging me
just google it dude im watching anime rn
Suggestions for @brittle wing
- How to use RVC Mainline Colab by Cauthess
- Full AI Voice Model Training Guide (local) by Christopher Villanueva
- AICoverGen Colab Guide by Eddy (Spanish Helper)
- Create a model with RVC disconnected (colab) by Angetyde
that i just run it
If the program depends on other files it wouldn’t be able to use them when zipped
So you would need to extract it
tyyyyy
prob lol idk im watchin attack on titan rn
Well the docs could help you as it had the guides for them
theres a first time to everything
You're welcome
when i open start http my windows anti virus pops up i click run anyway and it disappears
bruh 💀💀💀
Is there any spaces or special characters in your directories?
idk man sounds like a skill issue tbh
wait is it start http or start https
http
is the system 32 supposed to pop up
Yes
No
Wait a minute and it’ll start downloading the required files then it will start
sheesh good stuff my guy
do i close cmd
Ayo? @shadow plover level 3 !!! 
aight
i need some help on this colabs https://colab.research.google.com/drive/1mHKTGH5e3SAyDSBss1KtiYRbDdQzwSMs?authuser=1#scrollTo=8RwuGj0LmSB_
nah man im busy rn
if its only for inference
btw
you can use this https://docs.google.com/document/d/1YbXcLFPaGjhOdG5NFkK3QrucCEpHZBwFUxkeMO8aB18/edit
Table Of Contents Introduction (with link) Model Loader (Download & Upload) Inference (use RVC AI Voice Models) Ilaria TTS Settings (Inference) Introduction (with link) Ilaria RVC Zero, is an RVC (Retrieval-based Voice Conversion) Fork made by Ilaria & mikus, running only on Hugging Face Spac...
fr fr 💀
alright
everything is working but its not working on discord
Maybe read the guide
where is that
-realtime
Tag suggestion for @shadow plover
first link
read
It’s on client by default
Can you tell me how to set up UVR5 to take only the backing vocals from a song?
In website uvr5 ui
huggingface?
Yes
doesnt work with anything i tried all
Try importing a different model and using it
If try importing without a space
- colab
- Applio, by IA Hispano Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- RVC Mainline, by Hina Google Colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- Ilaria RVC, by thestingerx Google Colab
- UVR5 NO UI for Google Colab, by Eddy Google Colab
- UVR5 UI, by Eddy Google Colab
Ayo? @open stag level 2 !!! 
download
Download what
im trying to find the rvc download that uses python
For real-time or covers
And what’s your GPU
AI HUB Docs




