#✨│ai-help
1 messages · Page 77 of 1
yes or no
you can only use the steps at every checkpoint
yes and please use what is said in the guide
they want to adjust the save frequency so that it matches the recording point on the tensorboard
But first, you are aware that you don't need exactly the lowest point of the graph, right?
You won't notice the difference if you pick the closest to it
picture 1, the tensorboard show 770, picture 2 when saved it show s749
i did get for SVC, but rvc i don't get how to calculate it
-svc
it says v2 so im guessing its rvc unless im dumb
@placid holly read this
long back then, i did calculate for SVC and solve it
but RVC, i'm stuck
Which version of RVC are you using?
Which fork?
the Mangio fork, i just try to match the step
nothing any special
sometime they match each other, but i don't know how tf i did
Use a save frequency of 10
how long does training normally take?
Ayo? @vast forge level 3 !!! 
your using colab so i wouldnt train over like 2h
so i can just leave it training
Gen Q abt training an RVC model: I understand that shit isnt as simple as "more epochs = better model", but are there consequences to running more epochs other than wasting your own time? Do models just plateau in quality after a while or could running more epochs somehow make it worse?
too many epochs can be bad due to overtraining
you can just train untill it overtrains and choose the checkpoint right before that
How do i know if its overtrained? Just testing and output quality?
-overtrain
Hey, @severe vapor!
👇 Here are some resources to help you identify if your model is overtraining
All-In-One Guide on how to make a good model
This guide explains how the D and G files works and much more: https://rentry.org/RVC_making-models
Credits: LUSBERT 
Automated Overtraining Detection (AOD)
Will be available soon in #1159513888199540817
Credits: grvyscale
exactly what i needed, thanks for pointing me in the right direction
Ayo? @severe vapor level 1 !!! 
How do I fix that damn issue?
👌 I'll try it.
so sorry
about your question, you take the .PTH that's closest to before 500 steps
not epochs, but step
those two are different things
np
Is it listed on the .PTH file the number of steps that it has?
yup
check around the end of the training tutorial of your rvc in the page
you think so?
for how long has it been going?
we're at 100 epochs
which batch size did you pick?
I went lower for this one 8
im guessing thats loss/g/total
@half cove told me about the batch sizes haha
nice name btw
for my first attempt at this I used a bad dataset with reverb and silence and it still turned out alright
want to see how far I can push it
oh no, reverb?
oh you are not training a model with reverb right now, right?
what does the % mean next to the epoch
nope haha, I used rx10 to get rid of that and mastered everything using fl studio
Ayo? @tall ocean level 3 !!! 
is it just % done?
RVC Guides (How to Make AI Cover)
Translation by country
good question @vast forge no clue
im making a shotgun willy model
If i had to guess it's how complete that specific epoch is
I don't really know FNAF who/what is a handunit
just listen to the voice https://www.youtube.com/watch?v=lK4PZ9jh-Cg
I had to restart because I realized half of my dataset was missing from the file
I'm following Julia's guide on when to stop training
how do i stop training
So at a certain point the graph lowers and does not lower any more
that's when you stop
where on tensorboard do i find that
Ehhhhh, this is kinda inaccurate.
Overtraining doesn't happen like that, normally once it's been increasing for a while and the other indicators aren't good (g/mel and g/kl), that's when you know it's overtraining. You should look for the latest non overtrained spot (because 99% of the time it's a better model).
But, again, that's advanced stuff
Oh that's an awful lot of collapses. Were you using Ov2?
no
i was using original
What batch size?
It's most likely a dataset problem... but to certify that I'd try again with rvmpe as your pitch extractor and 4 batch_size
not a single captcha appeared yet
i've been doing this for 1 hour and 30 minutes
You should probably stop & test your model
Collapses are a bit of a pain but they're not that bad if the model keeps improving
if i stop it will it save
Ayo? @vast forge level 4 !!! 
Yeah but you need to run the "Export Model to Drive" step
After stopping the training step
before or after
After the training step
And then your training files will be saved and you can continue later
so end it then export model
Yup
now everything should be in ur model's folder in rvcDisconnected
so yeah, its in ur drive
yes. those are the checkpoints
anyone know what to use for the tts ai videos? slowly learning about this stuff
Eh not really, the latest one on your drive is most likely better
You can use ElevenLabs for TTS
any sick dev's in here looking to hire !! Huge project !!
Free, but limited to 10k characters per month
Not related to the voices we got here too
What does cmd say
how do i upload the model to huggingface
Originally written images by FDG Re-written by Julia Last update: Jan 20, 2024
Hi, I keep getting the access denied error even though i already put my own AI voice in. yes i did put acces to "anyone with the link". used to work before now it doesnt
how do i find a collab disconect method?
Ayo? @empty tusk level 1 !!! 
Where exactly?
In Google Colab?
Which Colab space exactly?
What's the name?
Easy GUI (for RVC v2, with crepe) (with improved downloader)
https://aihubdocs.github.io/en/ check the Ilaria RVC page
Written by Julia Eddy Last update: Jan 30, 2024
It's up-to-date and fast asf
Check the troubleshooting page too, regarding the model download

thanks
Ayo? @meager bear level 1 !!! 
yw!
alguein sabe como hacer para q en el fortnite o otros juegos funcinoe el programa?
ya tengo el cable virtual
Guy help me pls
https://aihubdocs.github.io/en/ check the ai cover page
Written by Julia Eddy Last update: Jan 30, 2024
do i drag the pth file to audacity
No. Please read what I send
Depends
If you are using Colab or local RVC
rvc
Ayo? @sinful lava level 3 !!! 
can someone help me with colab rq
What's up?
can i pay someone to make one for me
https://docs.google.com/document/d/1biKwONvquRJp5nh6jji-AQNrnR5cdyMRciOQMUpNg7c/edit?usp=drivesdk scroll down to "codigo para estar afk"
You'll have to use the translator
thank youu!
yw! Have fun
Yes. #1159289738314919936
i was gonna do it locally but my pc is too slow for that haha
when it says stop training
where does it say that
I came for sound mod but I can't find Turkish models
i'm tranning a layne staley model but it sounds robotic, what would you guys do to solve that, more isolated vocals ?
when like makeing a cover what do you guys usually do with the back vocals?
Is it a bad idea to include some whispering in a dataset? Nevermind removed it
Ayo? @pine flame level 2 !!! 
@pine flame I feel like having a separate model for the same voice but in a whisper would be smart though because whispering doesn't work very well in a real time voice changer
Could someone take a listen to my dataset and tell me if there's something very clearly wrong?
Maybe I can't get good results because I added compression to the vocals or something
whats a good rvc model thats a girl voice?
@lime finch I have 2 of them that don't sound terrible, did you want them?
#1175430844685484042 look for any anime girl models
@dusty rampart has the best ones. Check his About Me
heya
Go to eep mr admin
Do you sleep
is basically passing out in VR for 4 hours considered sleeping?
😭 do you eat?
Or do you do photosynthesis
Weird question but ever considered stepping down from ai hub admin for now?
You have a lot of responsibilities in your life
not a role problem
Being an admin on two huge servers is another one of em
I made a really long voice file of my awful singing, i payed 9£ to train them w kits.ai but it keeps crashing
@half cove hggghhhgghjhhhj this goes so hard ......
How can i like..train a voice on iphoke
💀 Kits.ai
Yeah
Oh no...
I'm so sorry
Its okay
You know you can train quality models from your phone nowadays, right?
For free too
https://aihubdocs.github.io/en/ np. We made a beginner-friendly guide =3
Written by Julia Eddy Last update: Jan 30, 2024
yw have fun!
yes!
This is for desktop though
Ohh
You'll need good specs for that
Yeah any phone that has an internet connection can do it
Okk
It's through a website
It won't consume the resources
Check the RVC Disconnected page
I had a cold when i sang so it’s gonna be my voice
But when i have a cold
HAHAH
I'm just trying to find something realistic
Ayo? @lime finch level 1 !!! 
I don't know if this is the proper place to ask but I need help with an actual voice model that sounds like a women, not an anime. My voice isn't deep deep but i'm trying to get something that's properly trained and not roboticy aswell.
im in the same boat lol
Think we have alot of work to get our voices tuned to sound properly.
everything is loading forever, is there anything I can do?
RVC Guides (How to Make AI Cover)
Translation by country
Does anyone know how I can inference an RVC model on Mac
Yes you can
How?
Do you have python installed?
Yes
Get version between 3.8 and 3.10, download the https://github.com/RVC-Project/Retrieval-based-Voice-Conversion-WebUI repo, open the terminal, use cd to go to the RVC repo, type in this command first:
python3 -m venv .venv
source .venv/bin/activate
Then, use pip install -r requirements.txt, and finally, to launch the WebUI, use python3 infer-web.py --pycmd python3
Is your Mac the M1/M2 types?
Those chips are hella performant
It's the M2
Do you know how I install the repo?
There's a "Code" button, download the zip file and extract
Or if you have git, use git clone on your terminal
does that install all the pip stuff in that folder?
when you're using a venv everything gets installed there
RVC Guides (How to Make AI Cover)
Translation by country
What's the benefit of using MaglioRVC over the WebUI
probably some QoL stuffs and mangio-crepe f0 method (basically crepe with adjustable hop length), though the original RVC has newer latest version
Thanks. What does "adjustable hop length" mean?
there's mangio-crepe hop length setting in the inference and training UI, if you select mangio-crepe
what does hop length mean?
adjusting it lower will increase pitch accuracy, but will be slower
I see. With the original RVC, that's not possible?
Ayo? @stiff helm level 5 !!! 
it only has crepe method without hop length setting, but anyway rmvpe works better generally (and all recent RVC forks have it)
I see, I'll go with rmvpe then, thank you
@proud elbow do you have experience with the RVC webUI? I'm trying to run it for the first time, and having a bit of trouble
currently I have RVC on an intel iGPU laptop, and can only run cpu mode 
so I have no much idea on your Mac as a different system 
what's your issue now tho?
Ah that's alright, no worries
I can tell you what's the problem
These are the things I inputted
Both of those files, I put in the directory here
try put the full file path
I tried
the added_* file is supposed to be in logs\yourmodel
you can use it from path without it being it logs but put in for the dropdown
Should I create a "logs\yourmodel"?
I was storing my "experiment_name.pth" file here
then put it in logs\experiment_name
I mean the added_*.index file
yes
Great, it looks like this now
I still get the error, I'll print the full error that I'm getting
Thank you guys for the help so far @half cove @proud elbow
2024-02-03 07:28:56 | WARNING | infer.modules.vc.modules | Traceback (most recent call last):
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/infer/modules/vc/modules.py", line 172, in vc_single
self.hubert_model = load_hubert(self.config)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/infer/modules/vc/utils.py", line 23, in load_hubert
models, _, _ = checkpoint_utils.load_model_ensemble_and_task(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/fairseq/checkpoint_utils.py", line 423, in load_model_ensemble_and_task
raise IOError("Model file not found: {}".format(filename))
OSError: Model file not found: assets/hubert/hubert_base.pt
Traceback (most recent call last):
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/routes.py", line 437, in run_predict
output = await app.get_blocks().process_api(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/blocks.py", line 1349, in process_api
data = self.postprocess_data(fn_index, result["prediction"], state)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/blocks.py", line 1283, in postprocess_data
prediction_value = block.postprocess(prediction_value)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/components.py", line 2586, in postprocess
file_path = self.audio_to_temp_file(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/components.py", line 360, in audio_to_temp_file
temp_dir = Path(dir) / self.hash_bytes(data.tobytes())
AttributeError: 'NoneType' object has no attribute 'tobytes'
2024-02-03 07:28:56 | INFO | httpx | HTTP Request: POST http://localhost:7865/api/predict "HTTP/1.1 500 Internal Server Error"
2024-02-03 07:28:56 | INFO | httpx | HTTP Request: POST http://localhost:7865/reset "HTTP/1.1 200 OK"
put the full file path of the audio
"C:\Users\user\Downloads\yes123.wav"
i dont really know if its different on mac
I forgot to tell you to run dlmodels.sh
I can try that. Just "dlmodels.sh" in the commandline?
On your terminal, ./tools/dlmodels.sh
It'll also download pretrained model, should you decide to train something
Is this a requirement?
It says I must install aria2 to run this (but aria2 fails when I try to install)
Yeah
Ah, ok
Please set 'WHL_PLATFORM' env var or run this building on supported platform.
supported platform: manylinux_2_17_x86_64, musllinux_1_1_x86_64, manylinux_2_17_aarch64, musllinux_1_1_aarch64, win_amd64, win32
The install fails, seemingly b/c Mac is not supported
"Please set 'WHL_PLATFORM' env var" I'm not sure what this means, but it seems like my best best
In your RVC folder, run these commands
curl https://huggingface.co/lj1995/VoiceConversionWebUI/resolve/main/hubert_base.pt -o ./assets/hubert/hubert_base.pt
curl https://huggingface.co/lj1995/VoiceConversionWebUI/resolve/main/rmvpe.pt -o ./assets/rmvpe/rmvpe.pt
This will download necessary files for inference
Wow, you're actually the greatest
It downloaded both of those files
Thanks sm, I'll try again now
Hm, it looks like the initial hubert issue was solved
where i can find tutorials on making models?
just wondering how many epocs is just enough for a voice to sound good especially when re creating a rappers vocals?
do like 500 and check when it overtrains https://aihubdocs.github.io/en/rvc-resources/epochs-overtraining--tensorboard/
@forest sluice what is the hubert_base.pt file supposed to look like?
Maybe stop the WebUI, delete the hubert file, redownload it, then re-launch the infer-web.py file?
The error seems that the file is corrupted
I think you're onto something here, I don't think the hubert_base.pt file is formatted correctly
Ayo? @stiff helm level 6 !!! 
so what i kind of am confused about mainly the overtraining what will i need to do when it overtrains do i need to stop it and then will it be good or do i need to download more samples like Acapellas and add it and train it on that as well
@forest sluice I fixed that error!
I am on to a new one though:
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/infer/modules/vc/pipeline.py", line 154, in get_f0
f0 = self.model_rmvpe.infer_from_audio(x, thred=0.03)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/infer/lib/rmvpe.py", line 599, in infer_from_audio
mel = self.mel_extractor(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/torch/nn/modules/module.py", line 1511, in _wrapped_call_impl
return self._call_impl(*args, **kwargs)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/torch/nn/modules/module.py", line 1520, in _call_impl
return forward_call(*args, **kwargs)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/infer/lib/rmvpe.py", line 472, in forward
fft = torch.stft(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/torch/functional.py", line 660, in stft
return _VF.stft(input, n_fft, hop_length, win_length, window, # type: ignore[attr-defined]
NotImplementedError: The operator 'aten::_fft_r2c' is not currently implemented for the MPS device. If you want this op to be added in priority during the prototype phase of this feature, please comment on https://github.com/pytorch/pytorch/issues/77764. As a temporary fix, you can set the environment variable PYTORCH_ENABLE_MPS_FALLBACK=1 to use the CPU as a fallback for this op. WARNING: this will be slower than running natively on MPS.
Traceback (most recent call last):
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/routes.py", line 437, in run_predict
output = await app.get_blocks().process_api(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/blocks.py", line 1349, in process_api
data = self.postprocess_data(fn_index, result["prediction"], state)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/blocks.py", line 1283, in postprocess_data
prediction_value = block.postprocess(prediction_value)
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/components.py", line 2586, in postprocess
file_path = self.audio_to_temp_file(
File "/Users/matthewpena/Documents/Archived/Code/tools2/Retrieval-based-Voice-Conversion-WebUI/.venv/lib/python3.10/site-packages/gradio/components.py", line 360, in audio_to_temp_file
temp_dir = Path(dir) / self.hash_bytes(data.tobytes())
AttributeError: 'NoneType' object has no attribute 'tobytes'
2024-02-03 08:15:57 | INFO | httpx | HTTP Request: POST http://localhost:7865/api/predict "HTTP/1.1 500 Internal Server Error"
2024-02-03 08:15:57 | INFO | httpx | HTTP Request: POST http://localhost:7865/reset "HTTP/1.1 200 OK"
id train more than it overtrains then on weighs choose the checkpoint to the closest one to right before it overtrains make sure you have save small final model option selected then every time it saves it will create a model
you have to set the environment variable like what the error says: run export PYTORCH_ENABLE_MPS_FALLBACK=1 before launching the WebUI
Thanks so much Ouch
I'll do that
ah okay also noticed they told me about a time limit and switching accounts if i upgrade to pro for example will i be able to go for longer period of times?
if your using colab try limit training to 2h or under
or it might reach the gpu limit and kick you
if you upgrade to pro it will give you compute units
and will kick you after those are done
i dont really know tbh
so basically after like 2 hours i just press the square to stop it and continue after 2 hours again?
or is there a 24 hour cooldown?
alright
Is it possible to create an AI voice model with a mobile phone?
https://discord.com/channels/1159260121998827560/1160926856548200531
you can run the colab through a phone
How can I solve the problem of mobile phones being interrupted during production? I tried it a few times, but I got frustrated and gave up.
wdym being interrupted, elaborate?
?
휴대폰은 이방법을 할수 없어서 중간에 중단됩니다.
Cell phones cannot do this, so it stops midway.
not really sure about the devtools in phone browser, probably try google some guide on it
just stay on the page and check up on it
Of course, it's impossible without a computer.
that doesnt work much anyway as now google does captchas
No matter how many times I check and click...
also use https://aihubdocs.github.io/en/rvc/cloud/training/rvc-disconnected/ so the images work correctly
I tried all sorts of things, but gave up due to an error with my phone disconnecting in the middle.
- did you leave your phone on without checking it every few mins
- how long did you train
The mobile phone was moved by hand every five minutes. I tested it at around 300, but an error occurred in less than 30 minutes...
your phone network was unstable, probably?
I already saw it.
if the network was unstable it should still run but it will disconnect if your gone for too long
the usage time is usually up to 4 hours, even on free account
The maximum speed of Wi-Fi is over 500MB..
what was the message it gave you when it disconnected you
An error occurred.
the network bandwidth isn't always relevant to occasional ping spikes tho
Anyway, this method doesn't work with a cell phone...T.T
아무튼 이 방법이 휴대폰으로 안된다...T.T
it should work on cell phones
I understand what everyone is saying. As I've said many times, it's annoying because of errors that cause it to stop in the middle.
android phone tho?
it should work on basically anything that has internet
I just think it would be easier for me to give up. thank you for telling me.
what kind of error details?
yes. Samsung Galaxy S10e
i got that error a few times on pc.. when something runs that somehow uses more resources than its supposed to.. like more ram thatn its supposed to
would a lower batch fix it?
maybe?
to ile ustawić?
Ayo? @cobalt saddle level 3 !!! 
@worldly citrus
128
Ayo? @worldly citrus level 2 !!! 
to wartość domyślna
Uhm are you using rvc gui?
yes
where can i get latest?
found it on yt im new to this shi
Do you have an NVIDIA GPU?
yes
Click download
Written by Julia Eddy Last update: Jan 30, 2024
Check the "mainline rvc" page for a usage guide
okay , thank you ;DS
yw!
is there any link for a working rvc?
-links
Suggestions for @azure patio
- 🍏 Applio, by IA Hispano GitHub
- Mangio-RVC-Fork, by Mangio621 Huggingface
- RVC Studio, by SayanoAI Huggingface
- AICoverGen, by SociallyIneptWeeb GitHub
- Replay, by Replay Team Website
- Original RVC, by the RVC-Project team GitHub
- GPT-SoVITS, by RVC-Boss GitHub
You can find more info on the "❔┋guides" channel. If you can't find your answer, feel free to ask for help in "help-rvc". Credits to Faze Masta and Antasma for compiling these links.
thanksss
Ayo? @azure patio level 2 !!! 
that's the amd download !!!!
On top of being unusable it's the wrong one
OH FUCK
😭
https://huggingface.co/lj1995/VoiceConversionWebUI/blob/main/RVC1006Nvidia.7z @cobalt saddle my bad, this was the right link
Sorry
I misclicked
Thank you GDR

Why do they still have it if it's unusable?
Weird
Guys, when using AICoverGen-WebUI, modded by Hina is there a way to have the back-up vocals follow your voice model too. I find that the UVR and conversion work absolutely wonderful yet f.s.r. the back-up vocals always stay like the original. Only the main converts. This can be an issue because while the UVR is good it doesn't always distinguish main vocals and back-up vocals correctly
Is there a way to have it convert both main and back up at the same time?
Nope, that's just how it's programmed to be
wonderful
Just better to filter the stuff out yourself
yeah been doing that. It kinda works it's just. eh.
It's hit or miss really
On one hand I have been able to make better covers than ever, on the other hand I struggle.
Of course not all songs are coverable
yeah
Anyone know any good rcv v2 voice trainers? easy doesnt work anymore and im trying to clone my voice
eh not really
i mean, would probably sound ok but it could improve yk
RVC disconnected, check https://aihubdocs.github.io/en
Written by Julia Eddy Last update: Jan 30, 2024
thanks right before u sent that i litterly just ran the cell lol
Ayo? @frank roost level 1 !!! 
oh damn
is it possible to make the ai voice a voice changer?
Ayo? @vast forge level 5 !!! 
u can use W-Okada to change ur voice w the model yeah, you do need a good GPU or u could use colab
@forest sluice
Ok, so I let it sit for a while
I never got an error, but it just never finished
We're really close, but there's got to be some reason it hasn't finished yet
I only have 3 min 47 sec of audio inputted
RVC Guides (How to Make AI Cover)
Translation by country
can you send the link
also check https://rentry.co/VoiceChangerGuide
This guide is back to receiving regular updates, however do not ping me for anything on it. The guide itself speaks for me. - Blanc
Other Links
Antasma's Local Error Fixes
Antasma's Colab guide
Sushi's useful Links - You need to follow this if you are on an AMD or INTEL ARC graphics card
Frequent...
@forest sluice are you sure that rmvpe.pt is correct here?
It seems like that's what its loading
^
still loading?
Mac
what gpu do u have
Tesla T4
so u running colab
Oh np
so u have installed everything, including pretrains and huberts?
like a .7z that can be used after u extract it
I did git clone, and then I manually installed hubert_base.py, and rvmpe.pt
fair enough
I'm sorry that it's all kind of scattered, but I was following @forest sluice 's advice
yeah i saw that
./assets/hubert/hubert_base.pt
./assets/pretrained
./assets/uvr5_weights
Additional downloads are required if you want to test the v2 version of the model.
./assets/pretrained_v2
If you want to test the v2 version model (the v2 version model has changed the input from the 256 dimensional feature of 9-layer Hubert+final_proj to the 768 dimensional feature of 12-layer Hubert, and has added 3 period discriminators), you will need to download additional features
./assets/pretrained_v2
#If you are using Windows, you may also need these two files, skip if FFmpeg and FFprobe are installed
ffmpeg.exe
https://huggingface.co/lj1995/VoiceConversionWebUI/blob/main/ffmpeg.exe
ffprobe.exe
https://huggingface.co/lj1995/VoiceConversionWebUI/blob/main/ffprobe.exe
If you want to use the latest SOTA RMVPE vocal pitch extraction algorithm, you need to download the RMVPE weights and place them in the RVC root directory
https://huggingface.co/lj1995/VoiceConversionWebUI/blob/main/rmvpe.pt
For AMD/Intel graphics cards users you need download:
https://huggingface.co/lj1995/VoiceConversionWebUI/blob/main/rmvpe.onnx
check if everything has installed
Thank you, I'll check now
./assets/pretrained
./assets/uvr5_weights
./assets/pretrained_v2
I have these folders, but there's nothing in them except a .gitignore
download it from huggingface
Download what? The contents of the folders?
yeah
Ok, I'll look at that
Also,
For AMD/Intel graphics cards users you need download:
https://huggingface.co/lj1995/VoiceConversionWebUI/blob/main/rmvpe.onnx
Do you know where I should store this?
It's not loading in it seems like
Do you have a link to the huggingface
i mean, if its in the right place, it most likely is being loaded
so idk
better yet
create a .bat file with the following :
runtime\python.exe tools\download_models.py
pause
Waiiiit
no
we're git cloning for some random reason
oh nvm
it is mac
welp, almost the same thing then
python tools/download_models.py (with working dir being RVC)
I couldn't find anything about the way this has been installed, but if you've messed with venv, make sure that's active
Got it, installing now
Thanks
I'm downloading what @sand iris recommended rn, but I think I'm going to need to download this too
Apparently Macbook uses AMD
I don't think the main RVC project even does onnx
That would only be for the older desktop macs
else it's always intel or apple hardware
That's apple hardware
how doi do tts
Oh, ok
I'll lyk when the command you sent is done with all the downloads
@sand iris ok, finished downloading, ill try again
How long should I expect it to take?
@sand iris I've been running it for 2 min so far, and it seems like the same weird issue
how to save ai voice??
Dumbass don't know the basics
You're itching for a beating
Nostalgia aint u 4'11
I bet your black
And what if i am
Its black history month
You should get on your knees and suck my dick
I'll throw at you kfc chicken
Ill roundhouse kick your fatass
Nostalgia how old are you arent you 43
Bro you sound like a 3'11 kid trying to be Tough 😭
Ayo? @rigid mango level 4 !!! 
tf going on here
Nun yo biz damn
Ayo? @errant palm level 2 !!! 
Look the other way
it kinda is tho 
Ok "poopmaster" the cesspool calls for you
Blue shit tryna be nice
😭
bro shut the fuck up
I'll break your jaw you cum seeker
delete nostalgias message
next person gets mute 
Ok sorry
❤️❤️❤️ damn girl u cute ASF! Whats yo numbah! 📲❓
Bro show him respect
I am
Blue shit not trying to get your numbah😭
Ok bet
?? Wdym by meme bro this freak ass nostalgia hopped on my dick first
when people say stop you stop
I want to make rvc but when i click "Process data" is not showing anything in "output information" plz help me
This is my first time making rvc
Idk, im checking
Ayo? @cosmic tide level 1 !!! 
Full AI Voice Model Training Guide (Local)
Link: YouTube
Credits: Christopher Villanueva
Model training with Mainline RVC
Link: Rentry
credits: Raven (ravencutie21)
AICoverGen Colab Guide
Link: Google Docs
Credits: Eddy (Spanish Helper)
Create a model with RVC disconnected (colab)
Link: Google Docs
Credits: Angetyde
How To Make an AI Cover With Ilaria RVC
Link: Rentry
Credits: 👽 Julia (ailen2091)
Try the 2nd one
I need to use this thing?
Mainline rvc
Ok
Your link was a old version from may idk how you got that
Probably a random yt tutorial
Yes
So i need to delete the thing that im using?
I would delete that version and install the newest version of mainline following that guide yes
Yes
Do you know your laptop specs? Gpu, ram, CPU?
I dont remember
check task manager then performance
If it's old and you don't even know the specs then it's probably not good enough for local training tbh
No just open task manager
your gpu prob cant run it if its a old laptop that you dont know about you can try colab
Yeah
Check this link for a colab guide
Ok
Read the new guides and try it out first
Ok
Check for cloud training/colab
That thing?
Ayo? @cosmic tide level 2 !!! 
Bro please read
Ok
Are you even trying to train a model?
Yah
Yeah then that's the right one
Im doing what the guy doing in the tutorial
The guide right
go on the rvc disconnected tab
Not the video
What?
Open the tensorboard?
The guide should tell you what to do step by step just follow that
Bro this isn't a 1min process
You have to read
And follow instructions
Ok
It tells you everything very clearly
Ok
Have you even made a dataset yet
I just opened the tensorboard
So i need to download
Sorry I'm back. What's going on ?
So i clicked on a key but its not doing something, maybe its because of my leptop
It's because you are very impatient and won't read
Please read the guide
Step by step
You haven't even made a dataset, how do you expect to make a model
What of?
Thanks, np
I want to make rvc of sadie adler
What was happening before ?
Seems like you aren't the first
@stiff helm
GDR remember to ping people so they see the msg
no fixes there unfortunately
_<
I tend not to when I reply fast
- I don't have a concrete answer yet
Ah, well, thanks
It tell me to open that thing that i downloaded open the TensorBoard, its tell me to press a key, im doing that, this thing closing itself and there is nothing
No it doesnt
Take a deep breath
And read carefully
Originally written by Angetyde Re-done by Julia, Eddy, Poopmaster Light Last update: Jan 27, 2024
Really not sure what the hell is going on with it
Maybe its an issue with rmvpe.pt?
how big is the file ?
Ok, im an idiot, you are smart, king
he didnt....
.
Sorry for destroying your brain cells
The audio file?
181.2 MB, and this is what the folder looks like @sand iris
looks good on that end
The audio file is 10.1 MB, if that matters
idk what could be happening
I could try this? @sand iris
Originally written by Angetyde Re-done by Julia, Eddy, Poopmaster Light Last update: Jan 27, 2024
i sent you this
3 times
just read that 😭
why do you keep opening random stuff
.
Ayo? @cosmic tide level 3 !!! 
Yah i know
.
nah all good
Me too
you can do it
yes, run all of those things
All?
please do read the guide
yeah the guide will show u
Ok
i just did this for the first time yesterday too
it will give a option to do em all at once
@half cove do you have any idea about this issue
Ayo? @stiff helm level 7 !!! 
are you the guy whos on mac?
yep
i dont know anything about using rvc on mac xd
The same issue happened to someone on windows too apparently
What is the name of the folder?
what do you mean by this?
the rvcDisconnected folder?
It won't be able to load that
wdym
I'm not sure they have the code hooked up to load onnx models like that
Yeah no it'll only do it on windows
Ah ok, thanks. Where did you see that?
no
Looked at the RVC code
Tried seeing where it could be stuck with rmvpe earlier but that leads nowhere

he basically gave up and told me to go away 5min ago 💀
Ah, well, thanks. I'll keep trying I guess
but i have faith
Do i need to click them?
yes, preprocessing and feature extraction are essential for training
and saving it to drive allows u to retrain later.
you didn't run Set Training variables
is there any site i can use that has the ability to split vocals within a duet so that I can get two AI to do a duet?
Now thats happend
how did u get ur file to a wav?
if u did it with anything other than audacity it fails
that isnt it
it can split voices? i thought it just split instrumentals
you could try uvr bve or 5_hp
What i need to do here?
did you put Set Training Variable name as the same as your dataset folder
I need to do with .zip?
nope
you skipped one step
without the .zip
you didnt feature extract yet
that problem does happen to people who do it correctly btw
it even says that here
either its the zip being formatted incorrectly or it not being named properly
yeah defs dataset issue
i know but in this case he did actually
im pretty sure he skipped something at the very beginning
the thing is index training is goofy on colab
it gives that error for many reasons
like the ones i said before
Ayo? @cosmic tide level 4 !!! 
is your dataset folder named sadie?
wait
give me this error
experiment name literally does not matter
its just what u want ur model to be called
i never match it and my models work fine
this looks exactly like the error i got when i converted my mp3s to wavs with cloudconvert instead of audacity
Ayo? @cerulean dew level 6 !!! 
And what i need to do?
put the files ur using in ur zip folder through audacity and export them from there before trying again
@sand iris im gonna send you a dm
ur also probably gonna need a new zip folder with the corrected files
Ok
So put the aidio in audacity, after editing that and download again the audio in need to zip it and put in there?
Am i right?
2024-02-03 16:28:42 | INFO | configs.config | No supported Nvidia GPU found
overwrite preprocess and configs.json
2024-02-03 16:28:42 | INFO | configs.config | Use mps instead
is_half:False, device:mps
2024-02-03 16:28:43 | INFO | main | Use Language: en_US
Running on local URL: http://0.0.0.0:7865
BTW, when I first run it, I get this message about no supported GPU
yes
Ok
yeah thats exactly the message i used to get and its complete bullshit and incorrect and it took me 3 days to find out what the issue was when this happened to me
So how do i delete the audio from the google drive?
it doesnt matter bc u will just have to change the folder name u put into the training thing
What was the issue? I am running on Mac (10-core gpu)
Ok
not the GPU lol
it was bc the files werent being processed correctly when a different converter was used on the files (cloud convert)
That's the usual message on mac ! Use mps instead is a good sign, and what you'd want to see
The "no supported GPU found" Message on the UI is also normal, only inference is supported with macbook's GPUs
Training isn't
Huh, so that looks normal? Weird
What format was your audio in?
wav
Mine too
I actually also used cloud convert
I could try the original mp3
nah just run it through audacity it works and its quick
mp3 wont work?
ive never tried it but i do know wav and flac r the preferred file types
mp3 prolly works cuz ffmpeg, but just do wav
Ah, I tried mp3, I get the same (seemingly) infinite loading thing
can anyone help me? I am getting this error every time i am trying to convert my vocals to a voice model
is that huggingface?
you are using an outdated version
this
I signed up and all, but where is the ilaria section? I can only find "making a model" but i already have one, that i want to convert to some vocals
follow this path
RVC > Cloud > Inference > Ilaria RVC
it doesnt say "RVC" anywhere
oh I meant in the aihubdocs page
this one
thanks, im trying to upload the voice model now
lets see if it works 🤞
have fun!
yes, but sorry i have to delete this file because we cannot share songs with instrumentals
copyright strikes hard
its alr, my bad
all g bro
how to add new voice on a voice changer
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HFv2, by r3gm Huggingface Spaces
- AICoverGen, by r3gm Huggingface Spaces
- Advanced RVC Inference, by r3gm Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- GPT-SoVITS (demo), by litagin Huggingface Spaces
Quick question that I forgot the answer to. Doesn't rvC have an inference in hugging face?
elaborate
what do you mean
Can you infur voices using a hugging face space?
Where is that?
Poop the hf space is outdated and slow
https://aihubdocs.github.io/en/ @static gyro check the Ilaria RVC page
Written by Julia Eddy Last update: Jan 30, 2024
they did ask about it
i need a browser place when my gpu is being used up be rendering sfm frames
Yea but it's obsolete at this point
anyone can help me where i can find Greek models? Its really hard and havent found a way to create any on Linux
RVC Guides (How to Make AI Cover)
Translation by country
hey can i get help downloading the right real time voice changer for my pc please
⠀
Download for Nvidia GPUs 
Version 17b cuda
Download for AMD GPUs 
Version 17b directml
Download for Intel GPUs 
Version 17b directml
Download for Mac 
Version 17b Mac
⠀
@eager condor this should help :)
Why do so many models seem to slur words, like they have a lisp?
Some words (Original post) are not Very Good or Model not for this Language?
This Voice is Russian Speaking but it works in other languages
But where he sings about cola He's a little bad
copyright?
I think not here Because 1 This is a different voice acting
2 Is this a Pizza Advert?
But I'm not sure about that
adverts usually use premade songs
But if necessary I can delete
its not the voice its the instrumentals that get us in trouble
Yes, I understand
ok does this mean to throw in the towel and start from scratch....im at 150 epochs right now after 6-7 hrs
How would I go about making actual quality AI voice covers?
It seems to be mostly a gimmick for me at the moment due to the various weird artifacting, but I've seen some really genuinely awesome covers before and I'd like to sink a bit more time into making the outputs sound good. Any tips?
Ayo? @fickle delta level 1 !!! 
Sorry, I don't understand this
-rvc
Full AI Voice Model Training Guide (Local)
Link: YouTube
Credits: Christopher Villanueva
Model training with Mainline RVC
Link: Rentry
credits: Raven (ravencutie21)
AICoverGen Colab Guide
Link: Google Docs
Credits: Eddy (Spanish Helper)
Create a model with RVC disconnected (colab)
Link: Google Docs
Credits: Angetyde
How To Make an AI Cover With Ilaria RVC
Link: Rentry
Credits: 👽 Julia (ailen2091)
- 🍏 Applio, by IA Hispano GitHub
- Mangio-RVC-Fork, by Mangio621 Huggingface
- RVC Studio, by SayanoAI Huggingface
- AICoverGen, by SociallyIneptWeeb GitHub
- Replay, by Replay Team Website
- Original RVC, by the RVC-Project team GitHub
- GPT-SoVITS, by RVC-Boss GitHub
You can find more info on the "❔┋guides" channel. If you can't find your answer, feel free to ask for help in "help-rvc". Credits to Faze Masta and Antasma for compiling these links.
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HFv2, by r3gm Huggingface Spaces
- AICoverGen, by r3gm Huggingface Spaces
- Advanced RVC Inference, by r3gm Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- GPT-SoVITS (demo), by litagin Huggingface Spaces
Colab or Locally if you only want to change the vocals (it is not possible to save only the vocals via the website)
its just showing collapses...there are three...i was the guy with the excessive dataset...but i want to keep on going, just not sure if i will get a crappy model if so because of the crashes
@brittle wing
I don't handle the website 😭
Forgive me but I don’t understand this table
T-T