#✨│ai-help
1 messages · Page 54 of 1
"NFO:mim:====> Epoch: 1 [2023-12-26 21:59:59] | (0:01:36.458898)"
Also imo your wasting epochs if your dataset if very long
i used 350 on 17min dataset and it's not bad
only problem is a high notes but i can prevent them with rmvpe method
i lowered mine about 65% now
Does anyone has an applio colab link that works?
That’s perfectly fine
No
also is it possible to train an already existing model? i know that mine isn't overtrained yet but i already used google colab limit hours ago
Train a model that’s already trained?
Or resume training?
like i've already made a model right
like a 350 epochs model, and is there a method to add, let's say 50 more epochs to it instead of creating whole new 400 epochs model
how do you use rvc on discord?
Anyone knows how weights.gg achieves a stereo output with rvc?
RVC Guides (How to Make AI Cover)
Translation by country
if you do the retraining steps and set total epochs to 400, u can do it
keep in mind you need to keep the d and g pth files
what rvc
i figured it out
probably just making the mono output stereo, but it still outputs the same thing in both sides probably
i have g and d pth files on my google drive but where are these retraining steps?
What Colab are you using
Disconnected
Yeah there are steps marked with (for resuming)
Use those and the training step for retraining
i closed the page hours ago so it probably won't work
damn how long does the index training take?
im using rvc disconnected
"Minibatch step 64/162512"
like how does it take 162512 minibatches
thats like 5h
Has the mangio rvc fork become the main model trainer now?
it has always been that
u can use the original RVC too
The rvc that i used always only had harvest dio and pm as pitch extractions
oh yeah definitely consider upgrading
i am installing applio now
good luck, it's a very problematic install but if it works it's great
why is it problematic?
considered complicated to install by many
uhh did you use RVC-GUI?
I need more context
The the gpu ram keeps going up to 15.0 when training
How big is your dataset and please don't make your batch size more than 20
It is more than 20 minutes •_•
It's unlikely it exists, try finding it in #🔍│find-models
Bruh, that's too much
Is it affecting the system ram too
Cuz that rises up too
Wait shit I made the batch 40 it’s my dataset that’s 22 minutes
BRUH
So is making the dataset shorter the only fix I should do?
Just do 16
Batch size
it's fine as quality matters, but the recommended batch size is 8 or 16
In settings
What about Epoches?
500+
Any specific number is just at 500?
Are you going to check for overtraining or just trust your gut
I dunno
Just looking for one more thing I should do to prevent messing up
Just do 500
i'm trying to use the "CoverGen_NO_UI_v2_en" colab but when I do the mount drive it gives me the "Error: credential propagation was unsuccessful", anyone know a way to fix it?
Am I overtraining yet?
Alr here’s what I got
uncheck "ignore outliers"
Okay now max your smoothness
With the scaler?
Okay good now expand your graph
How do I do that
Enable range? I’m not seeing a pin
that's why I said to uncheck "ignore outliers" if you don't want the graph look cut out
Ok I did that
Ok I clicked this thing
Moved from RVC main to Applio and now every epoch is exactly 1 step and the models do not train. Interesting.
Yes that makes it bigger
Here a better photo
Give it more space
^
How would I do that
Can't you like use your mouse to change the size of the ui
Hello friends, I know the sound models, but I don't know where the colab link is, can you briefly summarize it?
I don’t know how
Also this is gone
Thanks very much
I clicked that the one next to the pin they’re still not showing
Ayo? @sharp island level 7 !!! 
It happened when I did this
@proud elbow help me here
I told you click the button left to the pin
Oh ok it works
They’re back
See
Anything else I should do?
Your graph needs to be wider
Ok how do I do that
probably no more idea cause I have abit different tensorboard layout from his
Can you hover your mouse on the edge of the right UI
The graph?
I had to reinstall every dependency for Applio to stop training 1 step per epoch and taking .14 seconds per epoch to complete..
MERRY CHRISTMAS AI HUB!
Celebrate Christmas with the highest quality girl voices for the voice changer or regular rvc v2!
Soft Speaking Female: https://ko-fi.com/s/9c8a5b192e
American E-Girl: https://ko-fi.com/s/e21ec90d1b
Cute & Calm Girl: https://ko-fi.com/s/c8cf0c2129
And you will find many others here, FOR FREE!! https://ko-fi.com/ilariaowo/shop
Have a great Xmas Eve! 
Lmao
I think I did it right
Can you tap Ctrl then -
Ooooohhh
I didn’t know what you meant
It's okay
Now what?
If the line starts rising, it's overtraining
what is error make sure make sure your data was preprocessed mean in feuture extration is easygui colab
What do I do then?
You can stop training, make sure you turned on auto save
Is there a way to tell if it’s on?
And you've made your index already
It's says in the settings
Are these the one
RVC settings
Where’s that at
The part where you enter numbers and check things
Yeah I’m extremely unfamiliar with RVC can u be more specific
Where's the part you entered your epoch number
Is this it
Absolutely not
Getting mileage out of that helper role.
Could you tell me which colab you're using
Looked like it said RVC 2 Disconnected.
Link it
Also do I delete the saved Epoches that are made when it’s training
That literally means auto save is on
Oh
You compare those saved files with your tensorboard graph.
At some point, the tensorboard graph will trend upwards. Identify the step that it does and compare that to the save files, should have one with a step count near it.
Use that file as your starting point for testing your model, itll be at the point of overtraining.
So do I still delete em
Dont delete unless you are retraining from a point or you have finished testing and found the one you like best.
Ayo? @sleek nova level 6 !!! 
ok so now it says python3: can't open file '/content/src/main.py': [Errno 2] No such file or directory
2
Did u run the first cell?
That takes like 15 minutes
okkie
i was watching like a 2 year old video so it problably wasn't going to be to correct
Are there any working kaggle notebooks for training? I was using colabs but I hit my usage limit as soon as I figured out what I was doing
oh hey its mine OwO
yep OwO
can someone pls help me set up my voice changer? 😭
Ayo? @brittle wing level 1 !!! 
https://rentry.co/VoiceChangerGuide
Check this guide
This guide is written by: Raven
Please give credit if you use elsewhere, thank you!
Other Links
Antasma's Local Error Fixes
Antasma's Colab guide
Sushi's useful Links - You need to follow this if you are on an AMD or INTEL ARC graphics card
Frequently Asked Questions
Jump To The Important Section...
does it work on windows 11?
i cant get it working
ive followed it
yep
whaaaa
let' tal in #🔍│help-w-okada
i can't rn
i want to load the gui for my pc which is open local from .bat, where's link?
I'm running RVC Project in Google Colab Pro (Retrieval_based_Voice_Conversion_WebUI_v2.ipynb) for the first time and I'm running into an issue. I see under the cell "Load packaged dataset from Google Drive to /content/dataset" I see this error code "Could not parse variable and value from “/content/drive/MyDrive/dataset/lulu20230327_32k.zip". Expected the line to start with a variable assignment." I am supposed to see "Dataset location Dataset: /content/mydrive/dataset/lulu2023027_32k.zip" with the ability to type in your own .zip file. I ran all the other cells above with no errors and my google drive is mounted. I even saw this error before I began running any cells. I'm using this tutorial video: https://www.youtube.com/watch?v=9wu6LSue_dU
Does anyone know how to fix ModuleNotFoundError: No module named 'tkinter'
in python
What is the best Collab to use if I want to convert my pre-recorded voice into a set voice from weights.gg
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
This should help.
Im trying to download my converted audio file but theres no 3 dots to choose download
Did you convert it
yeah i can hear the audio file and its definitely converted, but theres no download option
Using…
local version of rvc
Send a screenshot
imagine using linux💀
https://pcpartpicker.com/list/sWy2jH is this good for rvc?
bro you forgot the cpu cooler and fan case, i'd not recommend to use the stock cooler that comes with cpu package
is it bad?
so bad
@brittle wing hey is this overtraining
why did u ping me
what’s a good cooler
there are 2 kind, AIO watercooling and air cooling, which one do you prefer?
idrc
well if you looking for budget one, this is good enough
Ayo? @fluid topaz level 7 !!! 
Sorry accident
@stoic cloud it’s not connected to runtime but the model is still training what do I do!?
You can reconnect with the runtime by loading the same notebook you were in with the same account, it should automatically connect
Do I press change runtime type
No, it should just connect automatically when you have the notebook open
If not, try refreshing the page
I see something saying connecting with three green dots
Yep, that means it is connecting!
Oh thank lord!
Also is this overtraining
Graph seems to still be going down
It's been loading all the time since yesterday
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
RVC Guides (How to Make AI Cover)
Translation by country
how would one remove background vocals like harmonys
Karaoke models in UVR
@stoic cloud do I click export model or index training first?
Index training
Hello can anyone help me to zip a folder?
Export model is red and says export model is not defined
What does that mean
Help
Then I will download it
train index and model first
I got an error for export model
Says name “experiment_name” is not defined
tbh you don't need to, just grab the added_*.index and some .pth model snapshots from weights folder
Helppp 🥹🥹🥹
So export model is useless?
@stoic cloud is there a fix for this?
And where’s that?
You didn't properly run the notebook in order it seems like
Huh?
Do you have the model and index file saved?
I have no clue, do they both end up in the RVC logs zip file
@stoic cloud help me
I have not used the colabs before, although you seem to have used them since you do have model maker
when you download a folder, google automatically zips it for you
It's my own folder
I can't download it on my phone
Btw can anyone help me to convert?
@torpid python
Heyo
Hey hey
Help me pls I can't do it since yesterday
model files (.pth) are in weights folder while the index file are in logs folder
So is it in the zip folder or not
No
what zip folder
Mines not
You mean a model you downloaded?
rvcLogs.zip
Well open it and find out, but my guess would be no
the folder is just "logs"
that sounds like some sort of text logs
I don’t see one
are you on local or applio?
I see an index file
Local
Yes the first file is your index file
Oh thank lord🙏🏽
Ayo? @sharp island level 8 !!! 
What’s the second one I need?
The .pth file, which should be in a folder called weights
Yeah I’m not seeing that folder
do you see an "assets" folder
No but it seems like the logs folder was in the rvcLogs.zip
okay go out as far as you can in files
like until you reach a folder with rvc in its name
Nothing…what abt the npy files
send screenshots
They’re the only ones I have
Okay
Can you help me to convert an Ai cover
It tooks me 200secs and I get nothing
The model, did you download it from anywhere or did you just train it
I only use my phone
Train it
On rvc disconnected?
Do we know why mode collapses occur? I know what they are, but haven't quite found the why of it.
Yes
Okay try searching outside of the rvcdisconnected folder for the folders I mentioned just now "weights" or "assets"
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
Already did none of that i see
Idk anything about rvc on mobile but my suggestion is you do this on pc instead
I do see the RVC itself when I look up wights
What folders do you use
What
RVClogs?
Or another RVC thing
No just I looked it up on google drive
can you send the link to that google docs btw
I use Karaoke 2 from MDX
Can anyone help me to convert an ai cover using my model?
Ayo? @proper pivot level 3 !!! 
Okay is that zip file unrelated btw
I can't do it since yesterday pls
God dammit
okie thank u
Like was it there prior
No? I don’t think so
I was mostly watching over the RVC
Okay open it and check whats inside
You mean this?
That’s where the dataset is
the weights folder can be found in the RVC disconnected directory in left pane of the colab page, not in your Drive directory
Which button
yeah, click the folder icon first tho
Ugh
oof, you should have done it while the colab runtime was running
@proud elbow would it really be there, the guide for rvc disconnected shows the pth and index being in the google drive + why would the index be in the google drive but not the pth + the OG colabs that ran non-local would save in drive too
The fuck…
Like his index file is saved in his google drive
why wouldnt his weights be as well
is this a help channel for the ai voice changer thing?
Help
Is there a fix or something
Are you using rvc realtime or w-okada
what
😫😫😫😵😵
im using voice changer client demo
MMVCserver
Can voice changer use pth
Yes it requires pth
rerun the colab from beginning, good if you managed to save some preprocessed dataset and training snapshot
can you explain
Ill be honest with you I have no idea what that is
So I run the dependencies?
i thought this server was based on that voice changer
its like
a web server version
There's two major voice changers (that this server focuses on ig), which are 'rvc realtime voice changer' (this channel) and w-okada voice changer #🔍│help-w-okada
like a hub
#🔍│help-w-okada if you mean the realtime voice changer
and you could control it with a another computer
whats the rvc colab
This shit?
Okay wait, do you want to like speak into a mic and have an ai voice come out, or put an audio file in and have an ai voice come out
when you say voice changer
any of you helpers for wokada?
just go into #🔍│help-w-okada , scroll up until you find someone with a blue name and then ping them
bet
Ayo? @hoary garden level 1 !!! 
blue like any shade of blue
@proud elbow
Ok so I’m running dependencies how long until the pth file show up
Ok uh little update
I clicked the back button found the logs for a brief second until it took me to this
@proud elbow ok I found it
yeah that weights folder in the bottom
What’s the name of the file I need
the model checkpoints will appear in the weights folder during model training
@proud elbow
seems rather unethical to keep pinging persons with just screenshots without explaining what it is
or do you mean the error in GPU check part?
I’m sorry
The reason I did this because I don’t know which is the right one
yes
How to convert in hugginfavr
It tooks me 200 secs and nothing happened
The rvc
Help
what do you need
I need help too
Is this possible on mobile or nah
sup
it depends on whatcu want to do
inference is the only thing possible on mobile atm
its normal it depends from ur audio lenght and if duplicated the space or not
aight so I have this index file that's not working on models I've trained
the moment I use the index file this pops out and the entire model stops working during RVC
I get this thing
-rvc
Suggestion for @torn aspen
Full AI Voice Model Training Guide (Local)
Link: YouTube
Credits: Christopher Villanueva
Model training with Mainline RVC
Link: Rentry
credits: Raven (ravencutie21)
AICoverGen Colab Guide
Link: Google Docs
Credits: Eddy (Spanish Helper)
Create a model with RVC disconnected (colab)
Link: Google Docs
Credits: Angetyde
How To Make an AI Cover With Ilaria RVC
Link: Rentry
Credits: 👽 Julia (ailen2091)
Ayo? @proud elbow level 14 !!! 
I'd suggest to use one of these RVC forks
Ayo? @copper pebble level 42 !!! 
i cant even install or run it 😄
Ayo? @torn aspen level 2 !!! 
https://github.com/RVC-Project/Retrieval-based-Voice-Conversion-WebUI/releases try this could work well
i done this one but it wont launch , i start the "run" it just be visible 1 sec then closing
I thought I have a problem with the training it self though, since other index files are working but the ones that I train myself doesn't work
Are you using the added or trained index
it says that in 1sec i catch it
can u send me ur model in dm so i can check it??
btw only added.index is required
anything about that ?
is there any video for installation ?
i watch 3 but didn't work
I have a problem the VRC works good for maybe 3 or 4 times converting after that the pitch changes it gets higher if i convert it more times? Anyone know why or whats happening?
hi
I'm working on kaggle, how to upload files input files? Just on colab it was easier
Ayo? @patent pasture level 3 !!! 
hi what is Epochs:
oh, I understood probably
whats inference?
covers
How much Batch size in kaggle?
was i supposed to extract all files in the start_http
16 or 32?
This link https://colab.research.google.com/dri...
doesn't work😭
it depends on ur dataset
usually 8 is the standard
Also could someone give me a quick rundown on how they use it and what i need..?
ok, thanks
,<
what can i do?
Ayo? @brittle wing level 1 !!! 
training started, thanks
@modern oxide ya got the colab for voice changing
thx anyway
running okada its pretty impossible on laptop right?
I just need a voice changer..
Ayo? @cold vessel level 1 !!! 
do you have a powerful pc or a laptop?
you can run it locally
8gb ram and i7
i wasnt sure thats why i wanted ur confirm
seems pretty low for me
Is it normal that 10 epoches takes 100 secs always?
no gpu?
no :£
I thought 2 gpus will be faster
zamn, yeah that's not good enough for local :/
Nope..>,<
dataset lenght??
Anything else i can do..
thats why i thought too
colab, but tbh i never used voice changer colabs, soc an't help with that
2:29
Can you send it to me in dms
minutes??
i don't have the link, sorry :c
yea
damn..
well 10 epochs 100 seconds are 1 epoch 10 seconds
what gpus do you have?
how much epochs did u set??
I use kaggle and there 2 are teslas
500
hmm, weird, it should be faster than colab then 
just it is strange that it takes only 10 sec on all way
watch the tensorboard
Are there some
restrictions?
when I worked on colab it took 7, 8, 9. But on kaggle it exactly 10 secs
weird cuz it should be faster
maybe I shell make butch size bigger
Does anyone know how to fix ModuleNotFoundError: No module named 'tkinter' in Python
do you need a its notebook?
pip install?
nah, i don't use kaggle
it's cool
there are Mainline RVC, Mangio Tweaks, Voice Changer, CoverGen all in one place
dont work
is there a guide how to make a model itself from audio?
Ayo? @serene geyser level 1 !!! 
do you know how much 1 epoche takes in colab?
depends on a length of the dataset. 5 minutes usually take 8-10 secs per epoch, 2-3 minutes take around 4-5 seconds
i think it is nerfed or something else
Hi, I'm having some trouble and I'd really appreciate some help. I have no coding experience and I'm trying to make a rvc model. When I try to run go-web.bat, it says:
C;\RVC\RVC-beta0717>runtime\python.exe infer-web.py --pycmd runtime\python.exe --port 7897
'runtime\python.exe' is not recognized as an internal or external command,
operable program or batch file.
C:\RVC\RVC-beta0717>pause
Press any key to continue...
I'm really not sure what I'm to do, I looked up the error to see if anyone else has had the issue, and I saw someone saying to like, change the command, so I turned the .bat file into a .txt file and pasted it in, but it didn't seem to work. I also tried installing python in hopes it'd fix the issue, but it didn't work.
does this program only work with nvidia gpus?
Are you asking me? Because I'm not really sure. My laptop does have nvidia geforce rtx though.
How'd you download it ?
ah because ive tried it and it doesnt seem to work
Yesn't
I went to the rvc huggingface page and downloaded the version simply listed "beta", i extracted it to my C drive.
Ayo? @scenic gale level 1 !!! 
It mainly supports nvidia cards (you can train models & infer)
ive tried many different settings, it doesnt seem to be rendering
Ayo? @inland sphinx level 1 !!! 
It also happens to support:
- GPU acceleration on MacOS (bugged from what I've seen), but it supposedly trains & infers
- intel graphics, though training only works on the dedicated cards
- amd, on windows it can infer, on linux it can both infer and train
I'm not too sure on how to get it working on Intel though
What have you installed right now ?
Seems to be an older version, but it should be working
I see, not really sure why it isn't
try fetching the latest from here
https://github.com/RVC-Project/Retrieval-based-Voice-Conversion-WebUI/releases
Alrighty, will do
MMVCServerSIO_win_onnxdirectML-cuda_v.1.5.3.17b
is there a specific version to use?
Oh, you want to head over to #🔍│help-w-okada then for that
I gave up on applio
Im just installing the normal rvc version now
This one has rvmpe as a pitch extractor wich is good
Idk exactly what the differences are tho
what sample rate should I use for this model?
this is just a small part of the dataset
32k
I trained model and now will test
Ayo? @patent pasture level 4 !!! 
RVC Guides (How to Make AI Cover)
Translation by country
its L
Nvm found it, it was in the assets folder for some reason
Ayo? @astral perch level 8 !!! 
I did everything i could to make my model sound better but it all just end up sounding abstracted 
Ayo? @dense moon level 2 !!! 
really, in different rvc uis are different pathes
It doesn’t help that my character only has 20s worth of voice lines is it..
I even tried duplicating with different effects to maybe make the ai detect it as different pitches but still sounds just the same..
Is it safe to move my weights folder into the main rvc folder, will it still safe the models
Or does it need to be in the assets folder?
thanks
Is there specific epoch or smth in the training for specifically few voiceline characters or is it really impossible to replicate those types..
I get that error too
check if your folder has spaces or something
when you use the index file of a model will that increase the quality ?
were can i downloadd voice ai
no, will make result more realistic in terms of accent
Thanks 😄
/content/Mangio-RVC-Fork/logs/modelname/3_feature768
Proper Numpy version detected.
Trying doing kmeans 211079 shape to 10k centers.
/usr/local/lib/python3.10/dist-packages/sklearn/cluster/_kmeans.py:870: FutureWarning: The default value of n_init will change from 3 to 'auto' in 1.4. Set the value of n_init explicitly to suppress the warning
warnings.warn(
Init 1/3 with method random
Inertia for init 1/3: 896883.5625
Init 2/3 with method random
Inertia for init 2/3: 890529.625
Init 3/3 with method random
Inertia for init 3/3: 891258.0
[MiniBatchKMeans] Reassigning 128 cluster centers.
Minibatch step 1/82452: mean batch inertia: 30.664289474487305
[MiniBatchKMeans] Reassigning 128 cluster centers.
Minibatch step 2/82452: mean batch inertia: 25.69953155517578, ewa inertia: 25.69953155517578
[MiniBatchKMeans] Reassigning 128 cluster centers.
Minibatch step 3/82452: mean batch inertia: 31.805721282958984, ewa inertia: 25.71434285487554
(10000, 768),256
Training index...
Adding...
Saving files to Drive...
All done! Your index file has completed training.
it gives me this error when doing index
the length of the dataset - 1hr 20 min
anyone know a fix to this issue? the index file only turns out to be only 30 mb when its supposed to be 400mb atleast since the dataset is very long
yw :)
well, that happens. iirc you need to change the inner configurations of rvc to fix that
either way, you probably don't need an hour of dataset
does anyone know where that ghost face voice is from?
the one everybody uses
does it affect model quality

not necessarily? it just uses a short part of ur dataset for the index tho
okay gotcha thanks
can someone help
Ayo? @obtuse stag level 1 !!! 
damn does no one actually know about where it comes from?
idk even what a ghost face is so no
try searching for it in weights.gg or #1175430844685484042
its that famous one that has a raspy voice
find and remove this in infer-web.py:
if big_npy.shape[0] > 2e5:
infos.append("Trying doing kmeans %s shape to 10k centers." % big_npy.shape[0])
yield "\n".join(infos)
try:
big_npy = (
MiniBatchKMeans(
n_clusters=10000,
verbose=True,
batch_size=256 * config.n_cpu,
compute_labels=False,
init="random",
)
.fit(big_npy)
.cluster_centers_
)
except:
info = traceback.format_exc()
logger.info(info)
infos.append(info)
yield "\n".join(infos)
I am using colab so I don't know how that would work
But thank you that looks promising
dont think u can even alter it tbh
I know hence why I am buying a pc next year
I am reducing the dataset length to 40 minutes
yeah you don't need an hour
Thank you
help, program thinks i didn't run Feature Extraction even tho i did run it
tbh you could still make fine quality 1h+ dataset with such that code removed (yeah in local RVC tho)
whats your specs
the problem is, on colab, you can't
your dataset wasn't exported correctly, basically
oh that's why it got trained faster
not my spec, but 3060 12 GB is enough for training
You can but need to replace the script after the repo is cloned
okie thanks
Ayo? @tulip cloak level 15 !!! 
no
Just after there are only about 30
yeah its decent, is this smoothed though?
thank you
that's quite fine quality, as long there are no mode collapses detectable in 0 smoothness
still you need to test several model checkpoints tho
I tried installing the latest version, same error pops up.
Don't really know what to do next.
a couple of folders and files
folders:
Lib
Scripts
share
tcl
files:
_tkinter.pyd
tcl86t.dll
tk86t.dll
What did you use to unzip it ?
what would 32k do?
Ayo? @visual pumice level 4 !!! 
what are the differences they make with the models?
i tried v2 at 40k on a dataset on my voice and it sounded horrendously terrible
THIS WAS ALL TESTED ON THE Mangio-RVC-Fork WITH THE F-RVC-exp CONTINUATION FORK OF Mangio-RVC-Fork
(From what I know, each fork logs differently for TensorBoard)
Things you may need for this guide:
Audacity
iZotope RX Audio Editor
Adobe Audition
Spek
TL;DR is at the bottom of the page
Mangio logs...
You're in the queue! Your cover will be ready soon. Number of people in front of you: 0 (Status: 🟢)
RVC Guides (How to Make AI Cover)
Translation by country
hey hey, just wanna to ask if there is a tool to easy cut an audio file for training into mutiple parts
Ayo? @green pecan level 1 !!! 
you don't need to do that
just use one audio file and u should be good
okay thank you 🙂
yw :)
for dataset name no capital alphabet no symbols
Capital letters are fine
They just gotta match
dashes & underscores should be good too
its easy gui
yes ?
when i try its getting error if have symbols or capital
where do i drop my pth and index files at in mangio?
pth goes in "weights" folder, index goes in "logs" folder
how come none of the models i tried work?
which RVC are you using?
v2
which fork?
where can i see that?
send me a screenshot of the app and I'll let you know
maybe you knew before you download it. the most common forks are Applio, Mangio, EasyGUI
and then there's RVC-GUI which is super outdated and you shouldn't use it
oh you are using Colab hm
nowadays Colabs are a little unstable. I'll send you the most stable one
alright
Ayo? @halcyon flicker level 1 !!! 
rvc doesnt work anymore
What's Model fusion under ckpt processing?
Tried to redo training with 32k sample rate
how would i install mangio rvc on arch linux
how do i get xxx hes not on the thing when i searched it never gave me a link
xxxtentacion
search on weights.gg
well uve done then
ya wanna do covers?
https://discord.com/channels/1159260121998827560/1167844377046040769 follow this for covers
it says unkown
im trying to get x as the adlibs for my song
i cant get appio to work
That is not RVC, that is w-Okada
Did you select your files for the model?
yep
Also I recommend turning index to none
you can rvc inscription
Do the other models work?
The voice changer your using
“Voice Changer Client Demo” is also called w-Okada
what about your tool gimme a look
Can’t rn not at my computer
Are you sure you uploaded the .pth and .index file on the edit menu for your model?
It’s going to be different since I have different hardware then you
Some settings work better or worse on certain hardware
If you need any help you can also refer to these links #🔍│help-w-okada message
whats the better tool?
Your using it
why you are using different?
I don’t use different
I use the same program as you
It’s just that different settings work better on different computers
I want make my voice more natural
Tune or Extra
On max value?
do you have trump model?
Ayo? @gleaming tusk level 3 !!! 
thx babe so much
Check the website https://weights.gg
what about chunk?
You can also adjust that to see what sounds better/worse
Ayo? @violet heron level 80 !!! 
I wouldn’t really mess with it
trying to train a model for the first time on rvc (I always used kits.ai before) and I just wanna know if this is supposed to happen? and how long this goes on for?
for mote info, Im training a model for 50 epoches (since the audio im using is only 1:30) and have it so it's saving every 25 epoches
i keep getting this error when trying to download tensorboard ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
ERROR: No matching distribution found for tensorflow
A lot
Depends on your GPU tho
ok, so it is normal and it's not broken?
What technically does one have to do to try to replace Hifigan with another gan? I'm trying to see if replacing hifigan with Bigvgan(https://github.com/NVIDIA/BigVGAN) would yield an improvement. But I'm new to this AI Python stuff, so I'll probably rely on GPT to help me or give up in the end.
so how do i install mangio rvc on arch linux
get python 3.10 from the aur
setup a python virtualenv with python3.10 -m venv /wherever/the/hell/you/want & activate it via source /wherever/the/hell/you/want/bin/activate
clone the code from github via git
download the proper torch release (refer to https://pytorch.org/)
then install the requirements via pip install -r requirements.txt (assuming you cd'ed into the repo earlier)
make sure you have aria2 installed, and from the code's root, run ./tools/dlmodels.sh
then all that's left is running python-infer-web.py
I'd suggest using the original RVC repository though, mangio hasn't been touched in a long while
Does anyone has an applio colab link that works?
do i specifically need torch 2.0.0 as stated in the requirements.txt
Ayo? @misty stream level 1 !!! 
nah
tested & works fine on 2.1
No
<#1175615544037212200 message> not Applio but still pretty good
that works
Yea
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
RVC Guides (How to Make AI Cover)
Translation by country
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
Ayo? @brittle wing level 2 !!! 
-help
Thank youu
Ayo? @calm crown level 1 !!! 
-train
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
how to use hina kagle mod, i cant seems to run any code
ohhh its okay, i got it, i have to click edit
-help
So I havent used rvc for a while, and I cant seem to get it to come out of my voicemod, but sometimes I can hear myself talk but voicemod doesnt pick it up, any suggestions for microphone settings for rvc?
Ayo? @real rock level 1 !!! 
Don’t use Voicemod
dang well then idk how id get it to work :/
is there another way to get it to work?
got it working, ive never had issues with voicemod before, but i guess for now, i wont use it
is there a version of this script that works on linux
you guys the gasoline that i use on my computer to run rvc isnt strong enough, which gasoline should i use
voice models end up really choppy on discord but on like cs2 and steam games they're fine? I'm using a VB virtual audio cable. Someone please help me? Also im using the nyanners by dan model
have you tried diesel or camping gas
oh daim thats smart, you sure know a lot about computers
My voice model just sound like pure static even tho theres not really much background noise in the audio of the character i used, but the character only has 20s worth of words that they can only speak, is it that which is affecting the ai to not be able to process it well?
The song i wanted my voice model to sing was in japanese and that didn’t sound anything coherent lol, i thought its because of the language but then when i switched it to sing an english song, it still is just pure static..
-help
use prem gas
bruh you think gas grows on trees 💀
Ayo? @wooden plinth level 1 !!! 
it'll fix it
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
is there a spectrogram thats free?
Spek or Ilaria Audio Analyzer
RVC Guides (How to Make AI Cover)
Translation by country
i am using keggle and it always turn off after 30 minute, what should i do so its still keep running
Ayo? @blissful kraken level 3 !!! 
Community Models
goku (Goku (English Dub))
luffy (Luffy (English Dub))
mickey (Mickey Mouse)
peter (Peter Griffin)
plankton (Plankton)
spongebob (Spongebob)
squidward (Squidward)
waluigi (Waluigi)
... and 200+ more
Check out all of the public community models at https://www.word.band/voice_models
You can use any model using the model id (bolded) in the /cover command. For example:
/cover model:goku youtube:https://www.youtube.com/watch?v=s9FCCiEs84k
To see your private models and register new ones, please start a DM with me!
i am using keggle and it always turn off after 30 minute, what should i do so its still keep running
BRAND NEW FEMALE VOICE MODEL!!
Female e-girl sexy voice model for Okada (RVC V2) is now avaliable on my Ko-Fi!
Get it now here! https://ko-fi.com/s/734d5f276c
Or find other female models (including free ones) here: https://ko-fi.com/ilariaowo
20% discount if you DM me!
hi, when i convert the audio to the ai voice it says to download it using the 3 dots but there arent 3 dots
its robotic
its not robotic at all?? 💀
Anyone know why my rvc covers aint working
it makes a error
File "C:\Users\indyk\OneDrive\Desktop\AI COVERS\RVC-GUI-pkg\rvcgui.py", line 115, in vc_single
audio = load_audio(input_audio, 16000)
File "C:\Users\indyk\OneDrive\Desktop\AI COVERS\RVC-GUI-pkg\my_utils.py", line 19, in load_audio
raise RuntimeError(f"Failed to load audio: {e}")
RuntimeError: Failed to load audio: ffmpeg error (see stderr output for detail)
here is what its saying
@proven hill
do yk why
@true vortex
audio file not supported
or ffmpeg not working somehow
codec of the audio file is not supported
you can use this tool to convert the file: https://huggingface.co/spaces/TheStinger/Ilaria_Converter
welp my applio broke since I havent used it for months
whats the best local RVC rn?
Can someone help, the audio file when i drag it doesnt work like the file is unsupported 😭/
i am using keggle and it always turn off after 30 minute, what should i do so its still keep running
Does someone know how to make a good acapella?
Could it work with CPU to train model
When i training the model , when i click the last option to train the model it is not working .the output is same like in your video but there is not have any file saved in weights folder .
But doesnt this use ffmpeg as well 
uses it online on hugging face machines
RVC Guides (How to Make AI Cover)
Translation by country
How is training going?
Total epochs 150. Dataset length 38 minutes. Current Training epoch 49
Seems to be going alright
Greetings
I am having difficulties running an AI voice model
The native voice client interface won't load
I am on a windows PC with an NVIDIA GPU, using the MMVCServerSIO_win_onnxgpu-cuda_v.1.5.3.17b.zip version
The AI is set up, but the interface won't load, and the Google browser interface I'm using isn't working either
The Google interface loads, but it doesn't have any sound
Does CMD say anything?
what does model ID do
But Idk how to share it without also sharing the IP and name
@proper shale & @wide parcel
Yea
Alright
No errors here
keep going, also watch the g/mel and g/kl as well
How's this?
Looks decent
I figured out the ckpt processing, but with different tensors I can't do much
how is training going? 115 epochs
going well
Need more epochs? Or i can stop it ?
keep going
When I have to stop?
wait if ur training on RVC Disconnected just make sure u havent trained for more than 2 hours lol
and export ur model
Anyways, I don't think you need to stop anytime soon
I'm using RVCdisconnected. And training is on going form 2 hours and 50 minute
i recommend stopping rn and exporting model
Can you please explain when I should stop it ?
I want a best models it don't matter how long the training is going
literally right now
and continue later
How to analyse tensor board?
-overtrain
Hey, @latent kettle!
👇 Here are some resources to help you identify if your model is overtraining
All-In-One Guide on how to make a good model
This guide explains how the D and G files works and much more: https://rentry.org/RVC_making-models
Credits: LUSBERT 
Automated Overtraining Detection (AOD)
Will be available soon in #1159513888199540817
Credits: grvyscale
Sure
But I can't understand this! Can you explain it in simple terms?
yeah just keep going, though 2 mode collapses spotted, btw if you're training locally and have some spare VRAM you can test infer several model checkpoints right now
rvc disconnected
so no
the index file and model checkpoints can be downloaded while the training is ongoing, so yes
Yea you gotta open the colab files and download through there
_ _
oh
yeah especially considering Huggingface exists
the colab im using disconnect automatically
can anyone send the ai cover gen colab link
pls
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
thank you soooo much 😻
Ayo? @earnest jasper level 1 !!! 
Hi there, can someone tell me whats defference between Applio and RVC V2? I already understood that Applio just fork of RVC, but what general purpose of each? Which are better for what?
Both use RVC
RVC stands for Retrieval-based Voice Conversion, allows you to train voice models to convert audio files of a voice to another voice
I mean, I opened a guide -> https://docs.aihub.wtf where see two options: one cloning guide for Applio and one for RVC V2. So I just dont understand, which I should use, whats difference between this programms? Maybe some is more userfriendly or some need more powerfull hardware?
Ayo? @stray iris level 2 !!! 
"RVC V2" isn't it's real name to be honest. Dunno why they named it that in the guide. It's the original RVC. v2 is just the new pretrains and stuff.
Applio's a fork, meaning it has changes to the original program. Applio has an easier to understand GUI, same requirements as original RVC.
oh, thanks a lot
"RVC V2" is the model architecture, that also allows 32k target sample rate and its corresponding pretrain base model
you're welcome ;)
you don't need Kaggle anymore tbh
cuz I dont really understand how do I use multinotebook one
why
-colab
- AICoverGen-WebUI, modded by Hina Google Colab
- AICoverGen-NoWebUI [English], by Ardha, fixed by Eddy, Hina and Gdr Google Colab
- AICoverGen-NoWebUI [Spanish], credits to Eddy, Hina and Gdr for translating and fixing Google Colab
- RVC Disconnected, by Kit Lemonfoot Google Colab
- easyGUI, by rejects Google Colab
- Ilaria RVC, by thestingerx Hugginface Spaces
- RVC-HF, by r3gf Huggingface Spaces
- AICoverGen, by r3gf Huggingface Spaces
- RVC v2 Huggingface version, by Clebersla Huggingface Spaces
- Advanced RVC Inference, by neuclya Huggingface Spaces
These
colab is worse, isnt it?
free t4 and 4 hours
resets every day
don't think it's bad
when kaggle is 30 hours 2x t4
Ayo? @agile storm level 1 !!! 
30 weekly hours
ik
7 times 4 is 28
just saying
its not that big of a difference, and colab is just easier
but when I train a model I want it to be training more than 4 hours straight, not stopping and waiting until I can train it again
¯_(ツ)_/¯
and I am not sure if I can continue training on this colabs, can I?
you can
on every single of them? and which one is better to use then
cuz I've used colab only three times
and every time it was svc
now I am trying to get used to rvc
RVC Disconnected and EasyGUI specifically are for training, RVC Disconnected being training only
EasyGUI can infer too
okay, thanks. I guess ill use easygui then
oh and also, can colab work somehow when I turn my pc off?
there is this feature on kaggle
how do i upload a model on huggingface
well no, u have to keep the tab open at least
what do i do when it says
"[W CUDAGuardImpl.h:124] Warning: CUDA warning: misaligned address (function destroyEvent)"
Hello ! I try to run any version (RVC, DDSP,So-Vits) in realtime but no go... Can I get help on mac?
Do you have a Mac with the M series of chips
I have some macs, but also the macbook air M2
i would like it to run on my i7-13700KF thunderbolt audio
which runs Ventura as well
the i7 has a AMD card, as no more nvidia is used in Macs... RX6600XT 8gb
Ayo? @sand venture level 1 !!! 
sorry? do i need to do something i forgot?
is there some i forgot about the bot message?
yeah use that
nah its just a lvl up message
is it good enought to do realtime with a pth model?
yeah... it is
well I am currently training my model using colab, but still, how do I train on the multinotebook kaggle? there is a link but its no longer working
Is it rvc need gpu to train voice?
Ayo? @crude anchor level 1 !!! 
yeah
yes, it needs dedicated GPU to train, otherwise it could run much slower like trying to run modern games using CPU/software rendering only
I don't think there's an active Kaggle notebook iirc
I tried with cpu but at last the file is not saving . The terminal also not showing anything ,just like stucked
how do i upload a model on huggingface
Ayo? @tribal thicket level 2 !!! 
someone answer
-huggingface
Suggestions for @tribal thicket
English guide
Link: https://rentry.org/fdg_guide_newer
Credits: FDG
Spanish Guide
Link: https://rentry.org/AI_Hub_guide_esp
Credits: Julia (ailen2091)
Hindi guide
Link: https://rentry.org/AI_hub_guide_hi
Credits: Enes
Turkish guide
Link: https://rentry.org/AI_hub_guide_tr
Credits: Enes
fine to me. It supports my UAD soundcard too. Is there a step by step on how to get the real time? I can get the web gui running, but not the other menu with the input/output for real time. And thank you for those answers already.
oooh i thought you were using W-Okada
what about the index?
...just zip it with the .pth and uplosd
ok
I'd recommend using that tbh, idk about realtime on Mac
if it works well
i have tried the pre built binaries, only one "works", but i get a lantecy sooo impossible, and all is choped/distorded
With the M2 it should work fine tho
i would be sooo happy, i think binaries support other models
but no, i tried with headset to be sure of larsen effect
what's the deal here ?
Oh the rvc realtime thing ? Yeah that thing is beyond buggy
you might want to use voice-changer for real time
i have the sovits realtime gui running, then i can select a model, a folder for config file, then infer , and app exits... some about a config.yaml
Don't bother 
I can't even import models here, before it straight up didn't launch
It only supports windows
what would be your advise?
After how much time colab resources (GPU) are refilled?
Ayo? @latent kettle level 13 !!! 
There's a guide which can be found at https://rentry.co/VoiceChangerGuide , though I'm unsure if the instructions are right for apple devices
This guide is written by: Raven
Please give credit if you use elsewhere, thank you!
Other Links
Antasma's Local Error Fixes
Antasma's Colab guide
Sushi's useful Links - You need to follow this if you are on an AMD or INTEL ARC graphics card
Frequently Asked Questions
Jump To The Important Section...
It'll work, but I don't think it's gonna work as good as it could with minor tweaks
I think I have tried that github on M2 and had errors... will try now
Ayo? @sand venture level 2 !!! 
i just tried okada from github and after i did a conda env : (okada) macbook@MacBook-Air-de-Macbook voice-changer-master % sh start_docker.sh
VC Client start...(with gpu)
hostname: illegal option -- I
usage: hostname [-f] [-s | -d] [name-of-host]
start_docker.sh: line 22: docker: command not found
same with the other start2.sh