input Shaper | OrcaSlicer | Page 1

near olive Apr 17, 2024, 1:51 PM

#

Someone can look at this graph and tell me its good or bad ?

zenith current Apr 17, 2024, 1:55 PM

#

The one for Y looks great on X it's pretty bad and you should probably test if your belt on X is not too loose nor too tight

near olive Apr 17, 2024, 5:02 PM

#

zenith current The one for Y looks great on X it's pretty bad and you should probably test if y...

how can i test it for belt loosness ?

zenith current Apr 17, 2024, 5:06 PM

#

near olive how can i test it for belt loosness ?

Which printer are you using?

near olive Apr 17, 2024, 5:06 PM

#

k1c

#

rooted

zenith current Apr 17, 2024, 5:07 PM

#

Okay then it's not the belt because it's a COREXY Maschine and you would see this weird graph on X and Y

near olive Apr 17, 2024, 5:07 PM

#

ill checked all screws and they seems fine

#

https://cdn.discordapp.com/attachments/1178752355173416990/1230136542614388756/image.png?ex=663238ee&is=661fc3ee&hm=ee33a6857211f994e61232b838fb5deb7e90bdd178c687f3257009cf48899e62&

#

this foto mean 100% speed= 240 and 50% speed = 120+/-

#

and this model was printed on 140mm/s speed

#

https://cdn.discordapp.com/attachments/1178752355173416990/1230179438675886141/VID_20240417_173212.mp4?ex=663260e1&is=661febe1&hm=b55cf9186a0f9f91a548f545556446092affb40c7c09d13838aacaed83d41827&

▶ Play video

spark mesa Jul 6, 2024, 6:43 PM

#

Creality K Series printer has an issue with the XY Gantry creating horrible resonance. Only real solution as far as I know is the linear Gantry Upgrade. The issue really is just how creality built the printer.

#input Shaper