Then goes back to the port selection
#Minecraft Java (1.12.2 and 1.7.10 )
jovial wedge
jovial wedge
The latest.log is on the minecraft launcher?
primal lantern
sorry i iwas sleeping, what are ya trying to do?
next glade
sorry i iwas sleeping, what are ya trying to do?
trying to fix the sound issue on arkos/r36s
I figured that since the old version had sound the launcher itself had a problem
primal lantern
it cant find openal because its not installed on your system i dont know how to use it unless you would install it with "sudo apt install libopenal1 libopenal-dev"
next glade
so im remaking the files without having to use the launcher
jovial wedge
And where do I execute that command?
primal lantern
And where do I execute that command?
you can put that into a .sh and just run the .sh then, you need to have internet for that
or run it via ssh
and im not 1000% sure if it will mess with anything but it shouldnt as i have seen people install x11 on arkos based devices
next glade
zamn
jovial wedge
It showed up something of downloading
It says that is in the latest version of libopenal.so
next glade
sounds like it downloaded
next glade
hopefully sound works now
primal lantern
sounds good, hopefully sound now works
jovial wedge
Launchers now crashes, atleast i have a backup of the .minecraft
primal lantern
Launchers now crashes, atleast i have a backup of the .minecraft
are you still using a older/newer .start file
next glade
nah we messed with the files i think thats why
primal lantern
oh right, yeah that is maybe the problem now
jovial wedge
Its because of adding OpenAL64.dll to the folders
next glade
its weird though. If he didn't have it installed before why did the first version work
yep delete that
next glade
still the same crash?
primal lantern
its weird though. If he didn't have it installed before why did the first versio...
a version had sound?
next glade
i didnt know this either
primal lantern
the first 1.13
hmm weird
jovial wedge
primal lantern
remove libopenal.so from the libs folder
jovial wedge
Oh
I was about to reinstall
But i didn't deleted the files
Lets see if that fixes it
It works now
Without sound
Is the firmware
I think
jovial wedge
I tried that
next glade
Oh damn
jovial wedge
It instantly crash
jovial wedge
Where are the logs?
next glade
you cant run it through launcher
jovial wedge
Oh
jovial wedge
Yes
primal lantern
im wondering why 1.13 had sound when 1.16.5 uses the same libs
next glade
yeah dont do that
primal lantern
ahhh
next glade
I examined all the differences between them and its prob the launcher
itself
but only for r36s
jovial wedge
Without the launcher works with sound
jovial wedge
1.13
primal lantern
@jovial wedge wait 3 minutes i will give you a new .sh file i think i know the issue
jovial wedge
Alright
next glade
:( but i worked so hard for that script
jovial wedge
Don't worry, its good because you're teaching something new
next glade
Without the launcher works with sound
did you refer to 1.13 or 1.7.10 here
primal lantern
eh i didnt changed anything
jovial wedge
Oh
primal lantern
but use that as a start script, that should skip the launcher
jovial wedge
did you refer to 1.13 or 1.7.10 here
1.13 no launcher
next glade
Ah
primal lantern
i think arkOS uses Pulseaudio without multi audio support, so the launcher is running in the background doing nothing hopefully which is still bad but doesnt allow Minecraft to get openal his audio
jovial wedge
Maybe
next glade
why is the launcher even needed though
you could just have every version be its own .sh file
primal lantern
why is the launcher even needed though
because im not allowed to have a port with 20 different .sh
jovial wedge
So i put the 1.16.5 sh and turn into a start file and put on a avaliable no launcher minecraft version
primal lantern
imagine you download a port and have 5 new ports scripts
jovial wedge
Thats hard
Anyways 1.16.5 is fine for me
Soo fine
Now i can continue my survival world
primal lantern
So i put the 1.16.5 sh and turn into a start file and put on a avaliable no laun...
just download the file i posted above and just put it into the ports folder, nothing more
jovial wedge
Alright
primal lantern
and then start it, hopefully thats it
jovial wedge
I think it worked
Its starting
Its loading
Its in a black screen so its loading
Its loading soo long so it means that it worked
Just like in 1.13
Still loading
It loaded
Mojang Studios screen
IT WORKED
Finally
primal lantern
FUCCCCCCCCCCCCCCCKKKKKKKKKKKKKKKKKKKKKKKKKKK
primal lantern
so sound is working completly?
primal lantern
i really need a fucking r36s
next glade
nice
primal lantern
time to add a killall -9 love into the original script
next glade
kill all love? that sounds evil :(
jovial wedge
Lets see how many mods will handle it
primal lantern
just for me as a little note, that will kill the launcher once the game boots
jovial wedge
Kill and love reminds me of Undertale
primal lantern
kill all love? that sounds evil :(
~~ like my ex did ~~ Love is the engine in what the launcher is written in
next glade
you need to disable firewall
primal lantern
i just know some python but thats it
python is so incredibly slow, i wanted to firstly use that with pyxel to learn something new but im too lazy to learn it
primal lantern
you need to disable firewall
what no?
next glade
yeah i had the same issue
primal lantern
not for moonlight, i never have to
jovial wedge
I need to try it
next glade
what no?
for me that fixed not connecting
or you make an exception for it somehow
i just disable firewall
next glade
if u use tailscale i think u dont need to do this
primal lantern
I saw love on a moonlight new port
thats actually why i used it, i saw how good the shit was what Jan did with it, The PortMaster patcher also uses Love2d
primal lantern
if u use tailscale i think u dont need to do this
i mean i have it but i dont use it for moonlight
next glade
python is so incredibly slow, i wanted to firstly use that with pyxel to learn s...
because its more high level or something like that
so its closer to humans than machine (?)
primal lantern
because its more high level or something like that
no, its just slow, there is no reason for it being so slow
sinful canyon
I heard something is now working on R36x
next glade
sound
sinful canyon
my curiosity is peaking rn
next glade
the launcher prevented sound from working
which is why the first version that didnt have it had no issue with sound for r36s devices
primal lantern
that is now for the launcher again, hopefully that now has sound too
sinful canyon
lemme see if I can install fabric and update everything
next glade
how is 1.16.5 fabric performance?
jovial wedge
that is now for the launcher again, hopefully that now has sound too
Is for the r36s sound issue?
primal lantern
Is for the r36s sound issue?
yep
jovial wedge
Lets test it
primal lantern
how is 1.16.5 fabric performance?
with a few mods, it can perform better than the 1.13
jovial wedge
True
next glade
with a few mods, it can perform better than the 1.13
and vanilla 1.7.10?
sinful canyon
and I mean it
primal lantern
get a R36H please
thats the plan because not many fakes exist
next glade
that runs like a dream
primal lantern
and vanilla 1.7.10?
i havent tested that as much
sinful canyon
thats the plan because not many fakes exist
there no fakes, stat!
and you might hit the lottery and get one with Wi-Fi pre-installed
next glade
also i found out that the java 17 mod has compatability with liteloader which we now have, but this will mean no forge mods if you want to benefit the most from performance. I think this will be the most performant version to play this port asides from 1.12.2 possibilites
primal lantern
my biggest problem is arkOS and amberelec itself, i dont like those
jovial wedge
All i can say that I had to put every file on my phone and is a torture of mount and unmount
sinful canyon
my biggest problem is arkOS and amberelec itself, i dont like those
It can run RockNIX pretty easily
primal lantern
It can run RockNIX pretty easily
yeah but i need it for arkOS and amberelec, i already have 3 devices running rocknix
sinful canyon
AmberELEC is a lot better so it should be fine
ArkOS is basically the bloated but simple thing
if it runs on AmberELEC, it will also run on ArkOS if the same steps are followed, I suppose
primal lantern
Amberelec isnt supported by the r36x anymore
and ArkOS is actually not on the devices either
sinful canyon
Amberelec isnt supported by the r36x anymore
it works by using the RG351MP iso
primal lantern
still its not actually supported
sinful canyon
yeah but it works somehow
funnily enough the network name of a R36S or H on a network is RG351MP lol
primal lantern
that is now for the launcher again, hopefully that now has sound too
is it possible i get a little test on it, because if it works then i will make everything ready to add it to PortMaster itself
primal lantern
thanks!
okay fuck it doesnt work AHHHHHHHHH
okay time to redo the whole Launcher would i say
OHHHHHHHHH i know why this shit isnt working
but yeah i still need to rewrite that launcher part
sinful canyon
what is the issue?
primal lantern
if i kill Love, the game gets killed with it because love2d basically says, this belongs to me, if i die you die with me
sinful canyon
thats so god damn funny but stupid at the same time
novel peak
I tried downloading the game on the R36S with ArkOS but it didnt work ): I've put the content in the \AppData\Roaming.minecraft (with minecraft 1.7.10 forge version) in the gamedata folder, is it missing something?
sinful canyon
did you installed the dependencies on PortMaster?
novel peak
no, where can i find it?
novel peak
oh alright
primal lantern
I tried downloading the game on the R36S with ArkOS but it didnt work ): I've pu...
if i were you, i would actually wait a week till its on PortMaster
okay new Launcher is working, Yay
novel peak
if i were you, i would actually wait a week till its on PortMaster
yeah, i guess i'll wait cuz im a little stupid with those thing 😛
jovial wedge
Sorry if I answer soo late but the 1.16.5-Fabric.start didn't worked on the launcher
novel peak
did you installed the dependencies on PortMaster?
Actually i've downloaded them all
jovial wedge
The new one
primal lantern
eh zulu8 isnt on PortMaster ( yet )
next glade
i wonder what'll happen once this port releases lol, i hope lots of people will start porting versions, loaders and such
sinful canyon
that would be incredible tbh
next glade
maybe itll evolve to be its own thing because minecraft is very moddable
primal lantern
that would be really nice
i mean its not as hard as it sounds but its just a pain for me because i need to test on my x55 then i test on my rg35xxsp then i need to make sure it works on the bare version without any other version installed because i dont want to use like lwjgl2 libs if they arent included in the version i want to port, then i see i renamed random shit and then i need to rename those to the original in the .sh and then you fucking see that the game wants xrandr lol
okay added a check now if the device has more ram than a gb it will use more than a gb
sinful canyon
1.16.5 is no bueno here on my end
It just dies after being selected
primal lantern
1.16.5 is no bueno here on my end
It just dies after being selected
i will make a new version now, hopefully that will resolve all issues with sound and such
sinful canyon
Alrighty
I shall wait patiently and continue working on my profiles for the cheapo thingies
primal lantern
hopefully that will now really be the last version
sinful canyon
for some reason I cannot select a select a version
I press A and it just does nothing
primal lantern
ah god damnit i forgot to add the love.event.quit()
now hopefully, i also removed the gamedata folder now, it is now already .minecraft so you just need to copy over instead of the weird gamedata shit
primal lantern
i should really stop editing files on my rg35xxsp and then forget copying it over, i always do that and forgot little fixes
primal lantern
AHHHHHHHHHHHHHHHHHHHHHHHHHH i know whx
sinful canyon
alright, on the fabric it was my dumb ass not putting the fabric files
primal lantern
alright, on the fabric it was my dumb ass not putting the fabric files
nope thats not it
i mean maybe too but its not the only problem
sinful canyon
darn
primal lantern
a new launcher.lua file, place that into the minecraft-launcher folder
sinful canyon
alright
beginning tests
yeah
not good
WHAT THE HELL?
Imma just remake the whole minecraft folder
I feel like there are broken stuff
primal lantern
I am using a Kodak one
okay thats a little better
sinful canyon
I wanna buy a Sammy one later
I am tired of these sub-par pos cards
ArkOS 1
Windows 0
I just deleted the file via the OS
yeah
it ain't working
I will format my SD card and retry tomorrow
spice magnet
I will format my SD card and retry tomorrow
Mine did that and said it was read only.
I couldn’t fix it
jovial wedge
Something is telling me that my stock sdcard soon will get corrupted
primal lantern
copying over and reading like 1000 files can make some sdcards corrupt
jovial wedge
Sodium works and gives a little of performance
primal lantern
Sodium works and gives a little of performance
Sodium broke my game sometime
jovial wedge
Oh
Mine it doesn't gives any problems
For now
It crashed some mins ago but I disabled 2 options and works
I added sodium extra and reese sodium options
I think it will crash
34 fps on ArkOS 🥳
Not good not bad
primal lantern
btw im currently making a minecraft mod for the mouse cursor in the main menu and i hate it but gpt-4o is a huge help
my poor cpu and ears ( im listening to music and it does brrrrrrrr)
jovial wedge
It reminds me of my old laptop with intel inside and 4 gb of ram and when I launch something like Roblox or Chrome the ram with CPU goes like "📈📈📈"
primal lantern
it would be fine enough if it was just using one cpu thread but it uses all 4 and makes everything unusable and i hate it
jovial wedge
Thats bad
primal lantern
i should really setup my 2nd laptop as a compilation machine
okay fuck gradle and java
i will not go down this rapid hole
haughty shard
now hopefully, i also removed the gamedata folder now, it is now already .minecr...
hey does the new luncher have the same steps to install
woeful arch
flickering on r36s
jovial wedge
flickering on r36s
Same but in 1.16.5 is normal
hot plank
Do i need to generate world on pc, and then i can play? It`s crashed on 1.13 every time i start a new world
1.16.5 fabric give me a black screen also
Im on MuOS, RG40XX H
hot plank
1.7.10 is running with pregenerated world
1.13 also runs with pregenerated world, but not that smooth
jovial wedge
Hey guys, is normal that out of nowhere in my phone it asks me to connect to a unknown PC?
hot plank
Even with zram and 512mb alocated it's still have fps drops in loaded chunks.
primal lantern
Even with zram and 512mb alocated it's still have fps drops in loaded chunks.
1.13 is the worst performing version
hot plank
1.13 is the worst performing version
Do you have thoughts about why is 1.16.5 is stuck at load?
primal lantern
Do you have thoughts about why is 1.16.5 is stuck at load?
no i dont but i can maybe tell if you give me the log.txt
hot plank
no i dont but i can maybe tell if you give me the log.txt
Wait a couple of minutes, i run 1.16.5
hot plank
no i dont but i can maybe tell if you give me the log.txt
There is 0 things in the log. Game just in black screen, and i cant do anything except pressing reset button. No new logs also in .minecraft.
primal lantern
There is 0 things in the log. Game just in black screen, and i cant do anything ...
eh i think you are on a outdated version
#1365836338024419348 message use that
hot plank
https://discord.com/channels/1122861252088172575/1365836338024419348/13683549971...
I use that already. But i try to set it again, who knows
primal lantern
i think your device crashes completly because of the ram is full, the log was empty?
hot plank
i think your device crashes completly because of the ram is full, the log was em...
Log is empty
primal lantern
hmm okay that actually means the script itself isnt running
wait what does LauncherLog.txt say?
hot plank
wait what does LauncherLog.txt say?
I didn`t know what files i need for launcher, so i run it from files in the port folder
primal lantern
okay so you are on a outdated version because a Launcherlog.txt is missing which automatically gets made when opening the Launcher
hot plank
https://discord.com/channels/1122861252088172575/1365836338024419348/13683549971...
I literally download this thing and replaces any files
primal lantern
I literally download this thing and replaces any files
i would actually recommend using PortMaster autoinstall folder
oh wait do you have all runtimes installed?
but yeah still PortMaster autoinstall is the way to go
hot plank
i would actually recommend using PortMaster autoinstall folder
What is autoinstall folder?
Also, do i need specific version of Fabric?
primal lantern
Also, do i need specific version of Fabric?
i used the newest one but can you go into the .minecraft/versions/ directory and show me whats in there ( on your device )
hot plank
i used the newest one but can you go into the .minecraft/versions/ directory and...
I deleted everything. and will start from scratch
hot plank
https://discord.com/channels/1122861252088172575/1365836338024419348/13683549971...
I need this version and original files from .minecraft only?
hot plank
make sure you have fabric installed on your pc too
It`s there
primal lantern
yeah that looks good, i have the same version
hot plank
primal lantern
that is right too
despite the Minecraft Launcher saying its from the 03.05 which is still a old version
hot plank
Is the Minecraft Launcher.sh that launcher that you talk about? I got my console 2 days ago, so i new for it really.
hot plank
that is right too
If it ask me to replace files i decline it, right?
Im copying files from/to .minecraft
primal lantern
If it ask me to replace files i decline it, right?
yep if you are copying into .minecraft then you decline
hot plank
Ok, everything is ready, and i fing where i should put .sh files
Launcher do not want to run anything
Trying to manual start 1.16.5
primal lantern
okay yeah that sounds right beside the Line 40 which i need to see
its always easier if you post the logs here
hot plank
primal lantern
#1365836338024419348 message
replace the Launcher.lua that is in minecraft/minecraft-launcher with that
primal lantern
okay weird the launcher log should atleast have [GPTK] in it
and the log.txt should atleast have all of the westonpack things in it
hot plank
Nothing in the boot.log either
light drum
@primal lantern damo can u tell me what i doing wrong or what i missing
i try to run fabric 1.16.5 but i only got black screen
primal lantern
i try to run fabric 1.16.5 but i only got black screen
sodium extra is broken
or better to say, you are missing fabric api?
2025-05-04 11:04:06,146 main ERROR Error processing element Queue ([Appenders: null]): CLASS_NOT_FOUND
[11:04:07] [main/INFO]: Loading Minecraft 1.16.5 with Fabric Loader 0.16.14
[11:04:08] [main/WARN]: Mod resolution failed
[11:04:08] [main/INFO]: Immediate reason: [HARD_DEP_NO_CANDIDATE sodium-extra 0.4.18+mc1.16.5-build.96 {depends fabric @ []}, ROOT_FORCELOAD_SINGLE sodium-extra 0.4.18+mc1.16.5-build.96]
[11:04:08] [main/INFO]: Reason: [HARD_DEP sodium-extra 0.4.18+mc1.16.5-build.96 {depends fabric @ []}, HARD_DEP crowdin-translate 1.3+1.16 {depends fabric @ [*]}]
[11:04:08] [main/INFO]: Fix: add [add:fabric 1 ([(-∞,∞)])], remove [], replace []
[11:04:08] [main/ERROR]: Incompatible mods found!
net.fabricmc.loader.impl.FormattedException: Some of your mods are incompatible with the game or each other!
A potential solution has been determined, this may resolve your problem:
- Install fabric, any version.
More details:
- Mod 'Sodium Extra' (sodium-extra) 0.4.18+mc1.16.5-build.96 requires any version of fabric, which is missing!
- Mod 'CrowdinTranslate' (crowdin-translate) 1.3+1.16 requires any version of fabric, which is missing!
at net.fabricmc.loader.impl.FormattedException.ofLocalized(FormattedException.java:51) ~[fabric-loader-0.16.14.jar:?]
at net.fabricmc.loader.impl.FabricLoaderImpl.load(FabricLoaderImpl.java:196) ~[fabric-loader-0.16.14.jar:?]
at net.fabricmc.loader.impl.launch.knot.Knot.init(Knot.java:146) ~[fabric-loader-0.16.14.jar:?]
at net.fabricmc.loader.impl.launch.knot.Knot.launch(Knot.java:68) [fabric-loader-0.16.14.jar:?]
at net.fabricmc.loader.impl.launch.knot.KnotClient.main(KnotClient.java:23) [fabric-loader-0.16.14.jar:?]
light drum
fabric api should be in the mods folder, right?
light drum
well, I had to remove it along with other mods
primal lantern
i mean it clearly needs it and i wouldnt know why you need to remove that, its the base for most mods
light drum
I removed mods directly through the console and I had to remove the api by accident
primal lantern
ah makes sense, i would always suggest testing the game firstly without any mods and then test it with them
light drum
without mods works but for some reason my cursor was invisible
primal lantern
without mods works but for some reason my cursor was invisible
that is normal
if i enable the cursor you cant look around anymore thats why i needed to remove it
light drum
ok, I understand because I thought something is wrong
primal lantern
nope its just that the mouse cursor is borked
light drum
I don't know how sou made it work on r36 when I have constant ram problem
I can't even enter the world because the game keeps crashing
funny part is i deleted all mods without fabric and my game now starting crash on mojang logo
primal lantern
I don't know how sou made it work on r36 when I have constant ram problem
could it be that you have a mod that requests 4gb of ram?
but use 1.7.10 if you want to play with good performance
or its just java complaining but too less ram that is not something i can change, either use Vanilla 1.7.10 or buy a better device
light drum
yeah, I need to buy a new device, but I can't find a good device that supports android and linux for under $100
primal lantern
yeah, I need to buy a new device, but I can't find a good device that supports a...
X55 ?
serene mist
Android sucks on x55
primal lantern
The only big flaw is the screen
primal lantern
Android sucks on x55
It's pretty good with GammaOS
serene mist
Alternatively OGU, more power but extra jank
sinful canyon
I wonder if people will create a CFW variant for the Switch Lite
like, RockNIX or something similar
would be a pretty cheap way to get a powerful retro handheld that is decently powerful
I may be stupid but I think Portmaster can be run on Switch
imma try it
primal lantern
I may be stupid but I think Portmaster can be run on Switch
it definetly can run and i think rocknix would run too if someone compiles it for it
hardy surge
I still have an issue with the controls. R2 also uses the shift key and Left Joystick down uses the Left Mouse button. I looked at the gptokeyb2 config but cant figure out why. Does it have something todo with the TextInput support by gptokeyb2?
primal lantern
I still have an issue with the controls. R2 also uses the shift key and Left Joy...
are you using my mod pack?
remove Controlling for fabric
hardy surge
Already did
primal lantern
hmm weird then its a other mod
hardy surge
this is my modlist. no input based mods. i think
my gptokeyb2 config
im literally going crazy trying to figure out why
primal lantern
does that still happen with no mods?
hardy surge
lemme try rq
primal lantern
but i will go to sleep now, i sadly need to be awake in 6 hours
untold relic
this is my modlist. no input based mods. i think
a mod like controllify could help maybe?
primal lantern
a mod like controllify could help maybe?
nice to see you here, but ive already tried controllable and lambdacontrols, both not working
hardy surge
I just fixed it by remapping all the keys 🤷♂️
i think its just an issue with gptokeyb2
untold relic
glad it's functional 🔥
untold relic
nice to see you here, but ive already tried controllable and lambdacontrols, bot...
nice to be here!
topaz condor
nice to see you here, but ive already tried controllable and lambdacontrols, bot...
Still sucks gptokeyb2 is being used and not a controller mod! It would of allowed for rumble as well I assumed
primal lantern
Still sucks gptokeyb2 is being used and not a controller mod! It would of allowe...
Then make one, learn java and make one
shy pelican
Welp… can’t wait to say this game is on sale… also the rare occurrence I’d mention Xbox having a game sale
hot plank
Then make one, learn java and make one
Is it even possible?
shy pelican
yes
hot plank
It`s probably need different version for each minecraft instance.
shy pelican
Also correct
hot plank
Also correct
Can you say more about that? I may find someone who can write a mod. At now there is 1.7.10 with forge and 1.16.5 with fabric (that i can`t run for some reason).
shy pelican
Not really, all i know is that mods need to have a version for each update, and I was just looking at a Mod "Controllable" and that has like 17 versions per update, even in the .1+ increments. Idk much otherwise
Im not a modder
primal lantern
Can you say more about that? I may find someone who can write a mod. At now ther...
Yeah each version needs a own mod but also i mean writing a mod for this old version and even able to debug everything sounds like a pain in the ass
hot plank
Yeah each version needs a own mod but also i mean writing a mod for this old ver...
Also, is 1.7.10 forge even work? There is non linux files inside versions folder
Official forge instaler for 1.7.10 create different folder name for itself
primal lantern
Official forge instaler for 1.7.10 create different folder name for itself
yeah it does, you now just copy over the folder....
hot plank
I probably need to install minecraft from the scratch again. And not today, im tired)
hot plank
fucking finally
How do you did that?
hot plank
I'll release the files soon
What device do you use?
next glade
rg35xx h
hot plank
Oh, so i also can run that on rg40xx h
next glade
vanilla 1.7.10 by itself has better performance than even this so if you want good fps run that
however this and liteloader might be insane, im hoping so
forge takes a lot of the performance
primal lantern
GG
oh nice, holy shit is that good, really nice work of yours. Am i allowed to use that once you post that script and maybe link or set you as a 2nd porter if you want?
next glade
oh nice, holy shit is that good, really nice work of yours. Am i allowed to use ...
Sure
next glade
Sorry for the long wait but here it is. I prepackaged with the proven to work performance mods that I think are okay to distribute and also with the lowest settings. By all means try different mods and configurations to see what works better.
Instructions: you can just drag this to /ports/minecraft/ and override all, or drag and replace by hand.
primal lantern
Sorry for the long wait but here it is. I prepackaged with the proven to work pe...
really nice work, i will review it later and see if i may be able to use that in the port
okay just looking at everything as the files, you really did a great job. i will really test it later, what would you like more, do you want to be set as a 2nd Porter or just get a appreciation later in the ReadME ?
next glade
I don't think I did that much, you did mostly everything, so probably just an appreciation
also when you test it try it on a 2gb device if you can. I don't have one but I think the biggest difference will be there
primal lantern
yeah i will test it later on my x55 (2gb ver) and rg35xxsp
main depot
Tried running it on the TSP, gave quite a few errors
The launcher did run, but it was very flickery
primal lantern
Tried running it on the TSP, gave quite a few errors
Trimui isnt supported, consider Knulli
main depot
Trimui isnt supported, consider Knulli
Might give it a try if I find a spare microsd. Currently have Crossmix on one and GammaOS on the other. Are there any plans on supporting it on Crossmix in the future?
primal lantern
Might give it a try if I find a spare microsd. Currently have Crossmix on one an...
no
primal lantern
What's the technical reason? I can try and help out however I can.
broken libs and such, i just know that we dont support it and ive also heard that we wont support it for now, consider asking in #☕｜lounge again, there is maybe someone that can tell you more
unreal cloak
What's the technical reason? I can try and help out however I can.
CrossMix isn't officially supported by Portmaster, so please don't expect anything to work until this changes.
Here specifically, this port uses the Westonpack runtime I made. Because CrossMix is broken in several ways, most importantly broken and missing libraries that are present and working everywhere else, i cannot support it, nor do i want to. It's a mess.
spare maple
how can I run this? Wanna try this on my rg-cubexx
jovial wedge
What do "Ready to PR" means?
visual elm
What do "Ready to PR" means?
It means that it's ready to be submitted for approval by the PortMaster team to become an "official" Port, directly available on the PortMaster app
visual elm
If you're curious, PR means Pull Request (it's a software development thing)
rugged owl
Hi, I'm trying to run 1.16.5 and it keeps crashing with the error "Error: Could not find or load main class net.fabricmc.loader.impl.launch.knot.KnotClient
Caused by: java.lang.ClassNotFoundException: net.fabricmc.loader.impl.launch.knot.KnotClient" I have fabric api installed
compact jungle
3,457 messages in this thread Damo!
primal lantern
Hi, I'm trying to run 1.16.5 and it keeps crashing with the error "Error: Could ...
do you only have the fabric api or fabric installed?
primal lantern
how can I run this? Wanna try this on my rg-cubexx
Follow the instructions but i did some smaller updates that arent here on the discord, just wait max 2 week then its hopefully on PortMaster
spare maple
Follow the instructions but i did some smaller updates that arent here on the di...
Sure 👍
rugged owl
do you only have the fabric api or fabric installed?
Both
rugged owl
I can't at the moment until my device charges because it's currently dead
primal lantern
I can't at the moment until my device charges because it's currently dead
cant you pull out the sdcard?
rugged owl
primal lantern
can you go into the 1.7.10-Forge folder and show it
primal lantern
okay that actually looks correct so something else is missing or broken, i would recommend reinstalling it on both your pc and device
rugged owl
I don't have access to my PC right now I used PojavLauncher
primal lantern
I don't have access to my PC right now I used PojavLauncher
im not supporting PojavLauncher it does things differently than the offical Minecraft Client
next glade
6 chunks with 30 fps on a pre-generated world in forge (bad quality so discord can let me post)
untold relic
Vanilla, right?
sinful canyon
6 chunks with 30 fps on a pre-generated world in forge (bad quality so discord c...
holy moly thats awesome
I will get on installing your pack rn so I can check it out
next glade
I will get on installing your pack rn so I can check it out
I didn't include new libraries it uses so if it doesn't launch for you drag these new lwjgl libraries
also this is with a pregenerated world, keep that in mind 🙂 it still struggles to generate chunks so if you play normally you'll get more stutters
sinful canyon
I see
next glade
Although that's just my experience with it, I have a bad sdcard so maybe itll be better for other people
sinful canyon
how can I pre-generate a world?
next glade
There's a mod for that https://www.curseforge.com/minecraft/mc-mods/chunkpregenerator
you can either do that on your pc, which is what I did, and then drag the world to your sd card, or do it on your device which I imagine will take longer and warm your hands
sinful canyon
hah
I will do that on my 36H
it won't explode but won't be cold either
it is running underclocked so it is fine
next glade
Oh I should overclocking my device if that's possible lol, just to see the changes in performance
sinful canyon
get ready to create a pocketable inferno
I once ran my R36S at 2GHz
lemme tell ya: it needed a fan on it to run decently
I have a photo of it
next glade
xD
sinful canyon
next glade
You could overclock it in winter to warm you up
next glade
That's pretty cool
sinful canyon
I got a lot of hate on the R36S subreddit
but people there are boring
i like my broken ass tweaking
next glade
I got a lot of hate on the R36S subreddit
Huh, why!? Ppl are weird
sinful canyon
Huh, why!? Ppl are weird
they say that theirs don't get hot so my mod was useless
but the ones that say that are utterely stupid
next glade
they probably don't overclock theirs
sinful canyon
they forget that the board is made out of copper and fiber glass. the copper wicks heat and distribute on the inside
but when you install a heatsink, the heat generated by the SOC gets a shorter path to dissipation thus you can feel how much it heats
and a heatsink mod is needed on the R36H because of the battery location
next glade
they forget that the board is made out of copper and fiber glass. the copper wic...
yeah these devices don't have good heat management. On mine the heatsink is literally the battery itself
so everytime i play something demanding i think about how my battery is getting destroyed lol
sinful canyon
this is what I done to make the battery destroying SOC less of a threat
so far it made my system a lot more stable on long sessions
aaand the game crashed
time to look a the log
next glade
Did you place the libraries?
sinful canyon
yes
next glade
There is one library that I didn't place because its by google so idk if i can distribute that, maybe thats what causing it
sinful canyon
There is one library that I didn't place because its by google so idk if i can d...
which one is it?
next glade
gson
sinful canyon
slip in the google one because it is open source
sinful canyon
root of the folder?
next glade
slip in the google one because it is open source
just directly in the libraries folder
sinful canyon
got it
primal lantern
oh sorry mrTschnitzel i havent had time to test the patch you made
actually i havent had any mental power to do it, i will hopefully do it today
next glade
its fine lol
sinful canyon
underscore is completely stuck
probably it is loading
mouse cursor is on the screen
time to wait
next glade
google one is here. I think the game works without it anyway though
sinful canyon
oh thank ya
next glade
mouse cursor is on the screen
nice!!
sinful canyon
I will install it once I encounter an issue
it is currently on the mojang screen
Yeah completely unresponsible
I will test without the chunk generator
And install the google lib
next glade
Yeah completely unresponsible
Where exactly?
sinful canyon
mojang logo
sinful canyon
feels like it is loading, but the cursor is not moving
yeah it was active
it is taking its sweet time
next glade
its supposed to take around one and a half minutes
next glade
Oh you have optifine? Yes remove that
Its incompatible with angelica, which is supposed to be better
(if your using my mods atleast)
sinful canyon
is waila good to keep?
next glade
I think so
sinful canyon
great
next glade
not inherently incompatible with the other mods but you never know
next glade
getting popular modpacks to run on this thing would be so funny
maybe that's the next thing ill try to do
sinful canyon
I feel like Waila is not good to work on this
sage frigate
which version best
next glade
which version best
depends on what you want
sage frigate
depends on what you want
jostick mod?
next glade
None of the versions have a working mod for that as far as I'm aware
best performance is probably vanilla 1.7.10
sage frigate
jostick?
next glade
the joysticks work on all versions but you'll have a mouse cursor as you play
sage frigate
me consol otg not work
next glade
If you mean external controllers then there is currently no way for them to work
next glade
you need to drag libraries and assets before you can play
sinful canyon
You need to install Portmasters necessary runtimes
sage frigate
the me
next glade
bad english
all good
sage frigate
libraries to .minecraft/versions/1.7.10
next glade
libraries + assets to ports/minecraft/.minecraft
sinful canyon
IT WORKS
next glade
Nice!
sage frigate
libraries + assets to ports/minecraft/.minecraft
assest?
next glade
Was waila the issue?
sage frigate
all
sinful canyon
sinful canyon
Was waila the issue?
Yup
next glade
Ah I see, no waila then
sinful canyon
Removed it and bam
Working as intended
It is just slow, prolly needs RAM to be tweaked
next glade
assest?
you need to drag the assets folder from your roaming/.minecraft folder on your pc. If it doesn't work try installing the specific version (1.7.10, 1.13 etc) and drag it again
sage frigate
you need to drag the assets folder from your roaming/.minecraft folder on your p...
hmmmm
next glade
It is just slow, prolly needs RAM to be tweaked
main menu is always slow, its really weird
sinful canyon
main menu is always slow, its really weird
Oh thats really wierd
next glade
yeah I want to fix that but I don't know how
next glade
Oh then now thats not normal
sinful canyon
I need to see if it works better with less RAM allocated
next glade
try to open a world but it will probably crash, if it does enable vram
sinful canyon
Because the SD Card is quite hot for some reason
sage frigate
true or false
next glade
I need to see if it works better with less RAM allocated
you can also try that, i havent tweaked with the ram too much
sinful canyon
I guess it is swap memory being flushed
next glade
true or false
true!
next glade
I guess it is swap memory being flushed
enable swap memory + zram for maximum ram! /j
sage frigate
next glade
now you need to drag 1.7.10.jar, 1.13.jar etc
sage frigate
not dowlanded jkşisdfjksadf
next glade
to ports/minecraft/.minecraft/version/[1.7.10/1.13]
sage frigate
for k36 17.10 or 1.13
next glade
for k36 17.10 or 1.13
i recommend 1.7.10
next glade
vanilla
next glade
not dowlanded jkşisdfjksadf
if you dont have them downloaded you might be missing libraries and assets. After you downloaded 1.7.10 drag assets + libraries again to be safe
sage frigate
if you dont have them downloaded you might be missing libraries and assets. Afte...
bro no open
next glade
send latest.log
next glade
do you have portmaster?
next glade
if you dont have portmaster ports wont work
next glade
you need portmaster for this port
sage frigate
where is
next glade
what firmware are you using
next glade
you need to download portmaster if you dont have it already
sage frigate
you need to download portmaster if you dont have it already
ok
trying
bro wifi is not working what should I do it does not work with otg
sage frigate
you need to download portmaster if you dont have it already
same again
next glade
go to options, runtime manager
sage frigate
next glade
download
next glade
drag this https://mega.nz/file/hKcWjIzB#3p9ujX9VYhtBdXdQwh1flBqVxzCcO1QqUkRobty_gcA to portmaster/libs
sage frigate
drag this https://mega.nz/file/hKcWjIzB#3p9ujX9VYhtBdXdQwh1flBqVxzCcO1QqUkRobty_...
where is portmaster
sage frigate
try arkos/portmaster/libs
not have arkos
next glade
send a picture of your files
sage frigate
next glade
go to easyroms
sage frigate
arkos or portmaster no have
next glade
search "portmaster" in files
sage frigate
tools/portmaster
next glade
find "libs"
next glade
yes
sage frigate
ok
sage frigate
next glade
replace 1.7.10.start and try to start minecraft, send latest.log if it crashes
next glade
send logs
sage frigate
primal lantern
yeah he doesnt have westonpack installed :)
next glade
you need internet connection because you are missing portmaster files i think
yeah
you could try downloading it to the sd card from your pc
sage frigate
not connecting with no name internet adapter
next glade
but i dont know how
sage frigate
I'll delete and install portmaster
outer hull
hi , has someone tried any version on the r36s?
next glade
it works but you need a specific version for having sound working
next glade
I dont know, its buried here. Honestly probably best to just wait for this to release on portmaster, but you could dig through the messages here if you really want to try this before that
outer hull
ok
OHH OK
i deleted the messages
guess i have to go to my friend to get the files...
primal lantern
somebody needs to test this on the new RG34XX SP
If you want to go ahead but i dont have a device and neither do i think it already has a cfw that is supported by PortMaster
next glade
that looks like a copy of the miyoo flip xD
primal lantern
that looks like a copy of the miyoo flip xD
yeah it definetly is but probably without all of its flaws
next glade
if its the price of the h700 handhelds with 2gb itll be fire for ports, but its probably more expensive
rugged owl
Alright I copied the 1.7.10 version from the Minecraft launcher and reinstalled the port and trying to run 1.7.10 vanilla results in a different error
Line 211 is the error
rugged owl
It won't let me load into any worlds it keeps saying it can't find "gnu/trove/map/TIntObjectMap"
primal lantern
i just realised how many backups i made
oh my god my sdcard is nearly full ( i just have the minecraft files on here =
primal lantern
@next glade am i doing something wrong now lol
WARNING: package java.util.concurrent.atomics not in java.base
Error occurred during initialization of VM
java.lang.Error: com.gtnewhorizons.retrofuturabootstrap.RfbSystemClassLoader
at java.lang.ClassLoader.initSystemClassLoader([email protected]/Unknown Source)
at java.lang.System.initPhase3([email protected]/Unknown Source)
Caused by: java.lang.ClassNotFoundException: com.gtnewhorizons.retrofuturabootstrap.RfbSystemClassLoader
at jdk.internal.loader.BuiltinClassLoader.loadClass([email protected]/Unknown Source)
at jdk.internal.loader.ClassLoaders$AppClassLoader.loadClass([email protected]/Unknown Source)
at java.lang.ClassLoader.loadClass([email protected]/Unknown Source)
at java.lang.Class.forName0([email protected]/Native Method)
at java.lang.Class.forName([email protected]/Unknown Source)
at java.lang.ClassLoader.initSystemClassLoader([email protected]/Unknown Source)
at java.lang.System.initPhase3([email protected]/Unknown Source)
okay nvm forgot to add that libraries
sinful canyon
@next glade the issue was ram yesterday
DANGIT
Changed it to 384M and holy smokes it is another beast entirely
next glade
<@442395116502646784> am i doing something wrong now lol
```OpenJDK 64-Bit Serv...
Nope issue on my end
yeah add those libraries
primal lantern
okay yeah it runs really well, going to add that to my PR now as a own version so we have normal 1.7.10-Forge and 1.7.10-Forge-Performance
next glade
Changed it to 384M and holy smokes it is another beast entirely
Oh really? Good to know!
sinful canyon
sound works and the screen doesn't flicker like hell when moving the cursor
next glade
Its weird though, why would lowering the ram make it run better
primal lantern
Its weird though, why would lowering the ram make it run better
swap, it goes to swap if ram is full
sinful canyon
because of swap memory
primal lantern
so ram on sdcard, which is 10x slower
sinful canyon
10x?
next glade
Ah, I see
sinful canyon
lmao
next glade
What about the 2gb devices though?
primal lantern
What about the 2gb devices though?
( in my PR i have a fix for that)
next glade
i meant the performance :p
primal lantern
Oh right
sinful canyon
my card is not slow but I dbout the reader on the R36S\H benefits from that
seems it is reading the game at standard SDHC Class-4 rather than the SDXC Class 10 V30 A1 spec that my card is rated at
swap is set to 256 MB
I will run htop later to see whats going on
but to get it running is already a major victory
next glade
going to try lowering the ram soon too, i always just played with zram
which i imagine impacts performance
Oh yeah it runs, average of 40 fps on 6 chunks. When I tried playing with 500 it couldnt even load the world without crashing
primal lantern
Oh yeah it runs, average of 40 fps on 6 chunks. When I tried playing with 500 it...
ive seen in the options.txt you had there was vsync enabled, it could get better when disabling it
primal lantern
now im wondering if 1.12.2 is possible thanks to you https://modrinth.com/mod/lwjgl3ify-1.12
next glade
garbage collection on java might be worth looking into, it could improve ram usage
next glade
now im wondering if 1.12.2 is possible thanks to you https://modrinth.com/mod/lw...
Ohh
I think lwjgl3ify is obsolete on 1.12.2 as there is that cleanroom project i mentioned
it also allows you to use modern java
but it does more stuff
primal lantern
yeah but that would be easier for now as Cleanroom is only supported by MMC currently and im too lazy to figure out what it all wants
next glade
I figured out that they have a json file so its not too hard to find the dependencies. Also if you start minecraft and when it launches you kill it you get a crashlog which lists of all of the library paths
primal lantern
yeah that is true but im a lazy guy
next glade
well that's fine, maybe I'll do it myself in the future :p
sinful canyon
Oh yeah it runs, average of 40 fps on 6 chunks. When I tried playing with 500 it...
Weird... I was able to get it playing decently at 416MB
primal lantern
it worked for me on 384
and then 512 and that also worked fine but im not sure if i have swap
unreal cloak
lol is this feasible for this port?
https://www.youtube.com/watch?v=GWjPPd69hM8
short rapids
maybe for the miyoo mini compatibile version 
primal lantern
lol is this feasible for this port?
https://www.youtube.com/watch?v=GWjPPd69hM8
eh isnt that what we are doing right now, i mean he is just using a super low end texture pack and basically no chunk rendering
shy pelican
It seems like it
rare zephyr
Hi. I'm just an amateur gamer and I don't know too much about coding, engineering and that stuff. I really want to try this port (1.16.5) in my R36s but I don't really understand how to do it hahaha. I know how to install a port on portmaster but I don't understand what "fabric" is or how to install it. I hope somebody can help me with instructions bc I really don't how to do it☹️
jovial wedge
Hi. I'm just an amateur gamer and I don't know too much about coding, engineerin...
Fabric is a mod loader
primal lantern
im wondering if i can just mount xrandr to /usr/bin for 1.12.2
primal lantern
Hi. I'm just an amateur gamer and I don't know too much about coding, engineerin...
play 1.7.10, 1.16.5 is not really great on a r36s
primal lantern
Is this atleast playable?
if you scroll a bit more up there are tons of people playing it, so i would assume its playable
but for both of you, i wouldnt recommend using the current version
marsh harness
What configuration do I have to put for it to work on the R36s?
primal lantern
What configuration do I have to put for it to work on the R36s?
The instructions exist........
I hate testing threads, why does no one read the things i write
i already made a new version but i wont publish that here for now, it is now including the version of @next glade which makes the game allot more playable
marsh harness
Okay, thanks for the help 🙂
primal lantern
just as a heads up this thread is a bit undocummented so if you werent here at the first second then you will need to find the newest / right files
jade grail
yeah i tried in my r36s and it crashes everytime i load up any version, but it seems to be a good port
main depot
I hate testing threads, why does no one read the things i write
There is no thread specific searching, and the information on some of these threads is all over the place, you need to read through many many messages to get to what you're looking for. And thing is (most) people don't really want to read they're lazy so they'd much rather ask than filter through all the messages.
primal lantern
There is no thread specific searching, and the information on some of these thre...
Exactly thats why i hate them too, i cant ping messages too but this is completely tested so it eill available soon on PortMaster
main depot
How hard would it be for discord to just make search filtering work on threads lol
I mean it already works for channels
primal lantern
I know external plugins exists, but that wouldnt help here because of my versions are named not lile understandable and i did patches for patches of the patches so you would need to redo allot of things, i may upload the latest zip later if i have the will
primal lantern
okay cant do that today sorry, got into a fight and my arm and hand is now hurting when i put it onto something so using a physical keyboard is basically impossible and i hate using my mouse. Sorry will hopefully do it a other day or when my hand and arm doesnt hurt as much anymore
untold relic
I hope you recover soon
primal lantern
i will, its just my chest and arm hurting like hell everytime i move it, good shit phones have single hand keyboards
untold relic
is there a keyword to find the latest thing that is the ready for pr state?
untold relic
i will, its just my chest and arm hurting like hell everytime i move it, good sh...
as long as you aren't coughing blood it should be just a rest thing but if the pain is too much do get checked by some medical professional
I used to get in some really bad fights in middle school, jaw still deformed to this day thanks to one of those
primal lantern
im currently not coughing blood but yeah the pain isnt that bad its just annoying every time i use my arm its a sting cold feeling so i tend to not use it. The other guy is apperantly more hurt than me, i was neither defending myself or started the fight but he was apperantly bleeding from something, so i would say im pretty lucky right now
untold relic
I see
primal lantern
https://mega.nz/file/BPUCALoQ#4R__CyhWlqaM5DjZYzgbAv0TkQRLXbfFXv-aN3VI520
this version now has the performance mods too
and is now called minecraftjava instead of minecraft
primal lantern
i would suggest using PortMasters autoinstall folder for it
untold relic
Is the gameinfo.xml supposed to be loose or in the subfolder?
next glade
the lwjgl3ify mod crashes normal forge so people might complain about that if they use the plain forge version
untold relic
It's been forever so maybe the standard folder and file structure has changed
primal lantern
the lwjgl3ify mod crashes normal forge so people might complain about that if th...
( i made a seperate folder for the performance mods)
primal lantern
Is the gameinfo.xml supposed to be loose or in the subfolder?
thats why i say use autoinstall
untold relic
not sure last time I checked anything about the ports and the handheld I use xd
nice
next glade
( i made a seperate folder for the performance mods)
Ah alright
primal lantern
i made it so that the when you use lwjglify3 the mods folder gets renamed to modstemp and performancemods folder gets renamed to mods
in this version it is also 1GB devices uses 384mb and 2gb use a 1gb and others uses 2gb
untold relic
very nice
next glade
i made it so that the when you use lwjglify3 the mods folder gets renamed to mod...
that's pretty smart
untold relic
I love teracopy for copying a ton of files at once faster than it'd be with windows explorer (the minecraft assets folder I have is pretty massive in amount of files)
kinda sad it uses a prompt when pasting files in windows explorer
primal lantern
the pain of me when using winscp to copy it over ( i did that like 7 times )
i should maybe try out nfs mounting in muOS, if that would work then i would fall in love with muOS because it works on rocknix so i can maybe use the same mount on both and it would be super fast
untold relic
do I put the java 8 runtime in the runtimes folder or autoinstall folder? I'm on arkos aeux on the r36s
primal lantern
do I put the java 8 runtime in the runtimes folder or autoinstall folder? I'm on...
libs
put it into portmaster/libs
untold relic
thank you
strange, it doesn't show up, I'll try with the wifi adapter
or is it just a thing in the folder and not in the portmaster gui?
had to update portmaster, now it's there
primal lantern
had to update portmaster, now it's there
oh that actually means it is now in PortMaster itself nice
untold relic
ouch
primal lantern
So no need for copying it over anymore
untold relic
for some reason it crashed but idk what I'm missing
do the prism launcher assets folder work?
primal lantern
do the prism launcher assets folder work?
im only supporting offical Minecraft launcher
untold relic
good call
I see a separate assets folder, do I put the assets there?
or in the .minecraft folder of the port?
primal lantern
just copy your whole .minecraft folder into minecraftjava, make sure you actually have the versions installed that you want to use ( the modloaders too )
untold relic
oh, seems I didn't do the modloader step then
good to know
I just noticed something not related to this
oh nevermind the bedrock linux launcher has some problems last few times I checked
is fastcraft for 1.7.10 tested yet?
primal lantern
is fastcraft for 1.7.10 tested yet?
nope nobody tested it
untold relic
I'll test it then
untold relic
in this version it is also 1GB devices uses 384mb and 2gb use a 1gb and others u...
that's for 1.7.10 or some other version?
still crashes, it's probably my arkos install because it has had strange crashes like this one on other ports that are tested and work fine
primal lantern
/log
silver tundraBOT
/log
Every port has a log.txt generated in ports/{portfolder}, please drag and drop it to discord for help.
primal lantern
that's for 1.7.10 or some other version?
all
untold relic
dw about the log I have to work soon
eh not that soon, I'll update weston then try again, then I'll post the log
I'll post it in a bit, I can read this log just fine
seems to be a problem with the runtime, and something about a coremod, I'm kinda too tired rn to troubleshoot or set up the sftp again so uh, later
next glade
is fastcraft for 1.7.10 tested yet?
fastcraft does run but angelica is supposed to replace it and optifine so they are all incompatible with each other. You can still compare their performance and decide which is best though
untold relic
Oh I see
untold relic
Lwglfy3 mod was causing the core mod problems for loading, now I saw a mouse cursor after removing it then reopening
It did hang though, probably because I loaded too many mods
primal lantern
which "mode/version" were you using
primal lantern
not the "performance" one?
untold relic
I pasted the stuff from the performance thing before I was uncertain what was causing the crashes
I tried 1.7.10 performance with and without lwglfy3 mod
Oh
It loads now but the performance thing from the launcher doesn't work
Only regular 1.7.10 forge mode seems to work on my device
Trying optifine now
I vaguely recall some Minecraft core mods rely on assembly optimizations (cpu specific)
Omw to try it with abyssalcraft, aether mod, tinker's construct and xaeros minimap
There's another one but I can't remember
untold relic
It hanged lol
next glade
It loads now but the performance thing from the launcher doesn't work
lwjgl3ify is required for the performance version, otherwise it won't work
raw wyvern
Its funcional on r36s?
raw wyvern
With forge?
primal lantern
and no sound too
that is already fixed
smoky plover
that is already fixed
oh nice, nvm then I was just waiting for the release to update it
primal lantern
oh nice, nvm then I was just waiting for the release to update it
#1365836338024419348 message
subtle girder
Pretty sure I installed forge wrong or something since that's not working, but the vanilla is working of the same version
primal lantern
Pretty sure I installed forge wrong or something since that's not working, but t...
/log
silver tundraBOT
/log
Every port has a log.txt generated in ports/{portfolder}, please drag and drop it to discord for help.
primal lantern
i always need the log
subtle girder
I'll get it I forgor
winter bane
I'd really like to test it — what do I need to make it work? I have several consoles available: R36S, RG35XXSP, RG40XX H, Trimui Smart Pro, Trimui Brick, etc. I assume I need the JAR files from the Minecraft version? Anything else?
hot plank
I'd really like to test it — what do I need to make it work? I have several cons...
You need full .minecraft folder
next glade
I'd really like to test it — what do I need to make it work? I have several cons...
jar files + library and assets folder
i think rgxx devices are best to do this from what you have
hot plank
Best device for Minecraft - it's most powerful one that supports PortMaster
primal lantern
I'd really like to test it — what do I need to make it work? I have several cons...
i wouldnt recommend a device without a analog stick, so i would say just use the TSP
but yeah for your question, copy over the full .minecraft folder
eager fern
can anybody help me? i tried like 4 times arleady and cant get it to work
im on rg35xxsp btw
main depot
@primal lantern Heya! I just installed Knulli on my TSP as you said, but the game seems to be crashing after choosing 1.7.10 from the launcher.
Here's what I did -> put the minecraftjava.zip into Portmaster/autoinstall, ran Portmaster and it installed all the files. Then I transfered `assets/, libraries/ and versions/' folders as you said in the initial 'how to'. (Yes I ran 1.7.10 on PC, and it does launch there)
primal lantern
<@721601450181918785> Heya! I just installed Knulli on my TSP as you said, but t...
have you ever opened PortMaster?
primal lantern
can you open PortMaster and tell me on what version you are?
main depot
2025.03.03-0141
primal lantern
okay that is really outdated
main depot
Weird, shouldn't it have updated by itself?
primal lantern
yes it should have
main depot
I know for a fact it was downloading an update when I first booted into it lol
So what could be the issue with Minecraft?
primal lantern
you dont have a /roms/ports/PortMaster by any chance?
main depot
Not a folder
Just the .sh
In Knulli the folder is in system/
And a few subdirectories inside of that
primal lantern
yeah i know but it is looking into /roms/ports/PortMaster for some reason
primal lantern
i assume all other games work fine?
main depot
Yup I ran Pokemmo it was working fine
But that is officially released maybe that changes something
primal lantern
nope shouldnt, lemme check something real quick
primal lantern
ah wait i found the problem
can you remove that Line from MInecraft Launcher.sh
export XDG_DATA_HOME="$GAMEDIR/saves"
primal lantern
I'll try to break it 😄
have fun ~~ its not that hard to do~~
primal lantern
i would recommend you even more installing forge and then using the "performance" mode
primal lantern
Is there any onscreen keyboard?
nope
i wanted to make one, one day i will do it but it wont be today, tommorrow or next week
primal lantern
This is running at like 5fps
change the settings
main depot
I saw Knulli had a performance mode, gonna try that
primal lantern
yeah try that, the Forge "performance mode" and putting the graphics settings way down
main depot
Definetely installing that right now
primal lantern
i mean the TSP is not the most powerful system but ive seen people play it on a r36s so i would assume it should play with some smaller fps drops. Also the first minute in game is always laggy because it loads the chunks
primal lantern
the performance mods are only used if you use the 1.7.10-performance
main depot
Dang it, it's crashing. Does Forge modify other files as I just copied 1.7.10 Forge from versions/
primal lantern
the folder should be called 1.7.10-Forge and its .jar should 1.7.10-Forge.jar
smoky plover
the folder should be called 1.7.10-Forge and its .jar should 1.7.10-Forge.jar
only the .jar? not the json then
primal lantern
only the .jar? not the json then
isnt really needed
that file is for the offical client so it knows what libs it needs and what file needs to be downloaded
main depot
Did all of that, still crashing
Running in aarch64 mode
Cleaning up
pkill: pattern that searches for process name longer than 15 characters will result in zero matches
Try `pkill -f' option to match against the complete command line.
rm: cannot remove '/run/seatd.sock': No such file or directory
rm: cannot remove '/tmp/drmpipe': No such file or directory
rm: cannot remove '/tmp/weston_runtime/wayland-0.lock': No such file or directory
umount: /tmp/javaruntime/: not mounted.
/userdata/roms/ports/minecraftjava/main.start: line 99: pm_finish: command not found```you dont have the java runtime installed i guess?
i would need the whole log to know that
primal lantern
Error: Could not find or load main class net.minecraft.launchwrapper.Launch
okay so it cant find the .jar
main depot
.minecraft/versions/1.7.10-Forge/1.7.10-Forge.jar
primal lantern
or it cant find a other lib
main depot
Is there anything else I can provide?
Lowering all the settings in normal 1.7.10 made it a lot more playable, from 5 to maybe around 20-30 fps, still not ideal but that's an improvement.
subtle girder
alright i didnt realize i had to rename the forge folder to not have all the extra numbers, that lets the regular version at least start to load (shows a cursor) but crashes, but performance mods launch is still not showing anything, lemme send the log in a few minutes
primal lantern
are you using the version i posted above? or MrTschnitzels one
subtle girder
https://mega.nz/file/BPUCALoQ#4R__CyhWlqaM5DjZYzgbAv0TkQRLXbfFXv-aN3VI520
this ...
i installed it from the mega link you posted here
hasty cipher
I wanted to try older minecraft versions, such as 1.2.5 and beta 1.7.3. Can someone tell me what I'm doing wrong?
this is the .sh file I constructed using the command line from my computer
and I am using the libraries from https://github.com/mikehooper/Minecraft
